Duties and responsibilities:

Planning and organizing construction projects, including developing project timelines, budgets, and resource plans.

Ensuring that all construction work is carried out in compliance with building codes, safety regulations, and other legal requirements.

Managing project teams, including architects, contractors, and other stakeholders, to ensure that projects are completed on time and within budget.

Monitoring project progress and making adjustments as necessary to ensure that projects are completed on time and within budget.

Collaborating with architects and other stakeholders to develop project plans and specifications.

Developing and implementing quality control procedures to ensure that construction work meets the required quality standards.

Providing technical guidance and support to project teams, including architects, contractors, and other stakeholders.

Maintaining accurate project records and documentation.

Develop and manage project schedules, budgets, and resources

Coordinate with architects, engineers, and contractors to ensure project success

Review and approve project plans, specifications, and contracts

Ensure compliance with building codes, safety regulations, and environmental requirements

Monitor project progress and make adjustments as necessary

Communicate project status to stakeholders and senior management

Manage project risks and identify opportunities for improvement

Provide technical support to project team members

Ensure quality control and quality assurance for all project deliverables

Lead project meetings and facilitate communication among team members

Assist in the development of cost estimates

Assist the project team with site safety documentation and coordination

Assist the project team with closeout of the project

Assist project accountant with monthly subcontractor billings and pay applications

Assist project manager with assigned tasks

Requirement:

Bachelor's degree in Civil Engineering or related field

Minimum of 5 years of experience in construction project management

Strong knowledge of construction materials, methods, and regulations

Excellent communication and leadership skills

Ability to manage multiple projects simultaneously

Proficiency in project management software and tools

Experience in managing large-scale construction projects

Ability to read and interpret blueprints and construction plans

Knowledge of budgeting and financial management

Experience in managing and supervising construction teams

Strong problem-solving and decision-making skills

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Sustainability Engineer (ESG) to be part of our Supply Chain Department diverse team of talent. You will be responsible to support Company’s Environmental, Social and Governance (ESG) projects.

What you will be working on:

Project Management

- Lead and manage ESG projects & initiatives from inception to completion, ensuring alignment with corporate sustainability goals.

- Develop project plans, timelines, and budgets, and coordinate resources effectively.

- Prepare Capex Justification presentation in an accurate and timely manner to facilitate Management Team decision making

- Project lead in a cross functional team to ensure project schedule is executed in a timely manner and meeting project budget

Supply Chain

- Assist and take lead to drive the initiatives especially on Scope 3 Emissions

- Assess and quantify upstream and downstream emissions from the organization’s value chain, including suppliers, products, and waste disposal.

- Collaborate with suppliers and partners to develop and implement emission reduction initiatives, such as sustainable sourcing practices and transportation efficiency improvements.

- Review Supply Chain SOP & OI and ensure they are updated to ESG requirements

Reporting and Compliance

- Support Supply Chain Department on Company’s requirements for reports on sustainability metrics, including greenhouse gas emissions, energy consumption, and waste generation.

- Ensure compliance with regulatory requirements and industry standards related to sustainability and environmental management.

- Handle Compliance, Internal, Exernal and Customer audits to ensure compliance

- Liaison with related government bodies on grant and commercial apects

Continuous Improvement:

- Monitor and evaluate the effectiveness of sustainability initiatives and recommend improvements based on data analysis and industry best practices.

- Stay updated on emerging trends, technologies, and regulations in sustainability and incorporate relevant advancements into project strategies.

More about you:

• Degree in Chemical/Gas, Mechanical, Environmental, health and safety & other engineering.
• Possess knowledge on ESG, IPCC, RCA
• Preferably 4-5 years purchasing experience or engineering experience in a front end semiconductor plant .
• Knowledge and relevant experiences in Conflict Mineral, Green Procurement is a bonus.
• Knowledge in handling audits for Scope 1 emissions is a bonus

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Description

· Planning, implementing and monitoring work schedule to meet project completion targets

· Preparation of progress reports, construction method statements and technical proposal

· Handling technical and engineering issues

· Ensure inspection and conduct check on site works

· Liaison with client’s representative, relevant authorities and consultants

· Oversee the day-to-day structure works of the project and provide timely updates

Requirements

Degree in Civil or Structural engineering that is recognised by PE Board or Degree Qualification acceptable by BCA

The position holder is responsible for checking the engineering datasheets of designers when required, assisting the production team, and E & I contractor(s) in technical clarifications and solutions to solve site problems, and assisting the commissioning team to solve E & I engineering problems

Key tasks:

• Carry out testing of all aspects of industrial generators, control panels, synchronizing panels, and fuel pump panels to ensure the product works to its specification.
• Setting up test bench and equipment includes load bank test on generators
• Able to read and understand electrical and mechanical drawings/layout
• Require to generate factory and site test report
• Troubleshoot and diagnose problems and minor repairs during testing and commissioning
• Aliasing with project engineers/managers to schedule and coordinate works to tight deadline
• Supervising and leading junior staff
• Ensure a safe work environment at all times
• Any other related activities or responsibilities as assigned by superior

Job Requirements:

• Min Nitec / Higher Nitec / Diploma in Electrical or Mechanical
• Min 1-year experience in a related field
• Knowledge of genset controllers/PLCs is an added advantage
• Good Knowledge and experience of generators will be considered engineer role
• Possess a valid Singapore class 3 driving license

Personal Competencies:

• Good interpersonal and communication skills
• Able to work as a team as well as individual under limited supervision

Job Highlights:

• Positive working environment
• 5 Days Work Week
• Attractive job package
• Flexible Work Arrangement (FWA)
• Age-Friendly Workplace Practices

• IT Industry
• Monday to Friday 9 AM - 6 PM
• Working Location: Clementi
• experience in presales / strong knowledge in cybersecurity industry

Job Description

• Offer pre-sales technical support to customers and partners.
• Collaborate closely with the Sales team to formulate and position solutions
• Conduct cybersecurity solutions demonstrations.
• Carry out Proof of Concept for proposed cybersecurity solutions and Network Performance solutions.
• Collaborate with Solution Vendors on Business Solution Proposals, addressing RFI/RFP design, compliance, and clarifications.
• Develop design guidelines and propose enhancements to customers for the assigned cybersecurity products.
• Conduct in-house lab tests to validate customer proof-of-concept setups, endpoint/network designs, and deployments using new products and features.
• Provide training for internal Post Sales engineers and Partners on product/technology knowledge.

Requirements:

• Bachelor’s degree or Diploma in Cyber Security, Computer Science, Computer Engineering or related field
• Minimum 1 years working experience in Pre-Sales activities to large enterprise or government sector or related field
• Possess good technical knowledge in Internet architecture, network infrastructure, Software Define Networks, Network Performance tools and solutions, UNIX, Windows, VMware, Security covering Endpoint, Email, Web & Cloud.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Tiang Wan Ying

EA Personnel Reg. No.: R1767473

JOB HIGHLIGHTS

· Machine design in Mechanical aspect, Jig and Fixture, Equipment and development

· Provide Conceptual, mechanical part detailing and cost estimation

· BOM & machine manual writing

· Handle customers’ enquiries and issues

· Conduct machine acceptance with customer

· Co-ordination with sub-contractors for machine build

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

REQUIREMENT

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

· Able to work independently and within schedule

Geekplus is a global leader in mobile robotics technologies, providing innovative solutions for order fulfillment. With over 1,000 industry leaders using our systems, we deliver flexible, reliable, and efficient automation for warehouses and supply chains. Founded in 2015, Geekplus has more than 1,500 employees and offices worldwide, including in the US, Germany, the UK, Japan, South Korea, Mainland China, Hong Kong SAR, and Singapore.

------------------------------

We are looking for a Service Engineer to join our team. Are you someone who is driven by curiosity and craves a good challenge? Join us and be part of this exciting adventure!

What you have to do

• Serve as the site supervisor, overseeing and conducting relevant site activities during project implementation in the APAC region
• Collaborate closely with project managers, contractors, and suppliers to manage overall site performance
• Prepare daily on-site logs and records for customer and internal team reviews
• During the service phase, conduct preventive maintenance and perform root cause analysis of production issues using diagnostic tools
• Prepare a training manual and provide training and support to customers and other external parties

What you need to have

• A bachelor's degree in mechanical engineering or related disciplines
• Solid experience in equipment/hardware installation, maintenance, and site supervision
• Knowledge of Warehouse Management Systems, or other related logistics systems
• Proficiency in AutoCAD and Microsoft Office
• Good IT skills, including knowledge of network infrastructure, is a plus
• Frequent travel is required

------------------------------

What we offer

• Young and energetic work culture
• Opportunities for global mobility
• Double pay plus attractive performance bonuses
• Medical and dental coverage
• 14 to 21 days of annual leave
• Cozy office environment with refreshments
• Location: Tampines Plaza

If your qualifications, experience, and aspirations match our requirements, please send your resume with your current and expected salary to us. All information and materials submitted to Geek+ will remain strictly confidential and be treated for recruitment purposes only. Only short-listed candidates will be notified.

Responsibilities

· Creating and maintaining database standards and policies.

· Supporting database design, creation, and testing activities

· Managing the database availability and performance, including incident and problem management.

· Administering database objects to achieve optimum utilization.

· Defining and implementing event triggers that will alert on potential database performance or integrity issues.

· Performing database housekeeping, such as tuning, indexing, etc.

· Monitoring usage, transaction volumes, response times, concurrency levels, etc.

· Implementing security measures and frameworks, while ensuring compliance. Identifying, reporting, and managing database security issues, audit trails, and forensics.

· Designing database backup, archiving, and storage strategy.

· Installing upgrades and patches for Graph (Neo4j) or SngleStore

Requirements
•Experience driving major production incidents and organise incident retrospective meetings
•Experience with Unix System, MariaDB or MySQL or SingleStore or MongoDB or Oracle
•Experience with high availability, high-scale, and performant systems
•Experience with python and Unix scripting

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Job Description

• Industry/ Organization Type: Manufacture of Electrical Equipment
• Position Title: Project Engineer
• Working Location: Nearest MRT – Woodlands North/Admiralty
• Working Hours: Monday – Friday, 8.30am – 6pm
• Salary Package: Up to $4,000 + VB
• Duration: Permanent

Key Responsibilities

• Attend meetings with clients and conduct site surveys to ensure all specifications and site conditions are accurately understood.
• Compile and update project progress reports, status updates, delivery schedules, and activities weekly, communicating these updates effectively to the Project Director and Project Controller.
• Respond promptly to both internal and external emails to maintain clear and effective communication.
• Maintain rigorous documentation of all project stages and ensure all designs submitted comply with client specifications and requirements.
• Continuously nurture and develop relationships with clients to ensure long-term cooperation and satisfaction.

APPLY NOW!!!

• Diploma in Electrical Engineering or an equivalent qualification with at least 1 year of experience
• Proficiency in AutoCAD and Microsoft Project is desirable
• Inexperienced candidates are welcome to apply as training will be provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70250 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job description:

• Coordinating with all related stakeholders
• Coordinating & supervising works & site activities based on systems & engineering design
• Making sure Mechanical & Electrical job is done based on micro-schedule and master programme
• Ensuring Mechanical & Electrical job complied to specifications, drawings, & authority codes
• Diploma in mechanical engineering or above
• Mechanical & Electrical Engineer experience in construction industry
• Familiar with AutoCAD & Microsoft office

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Japanese MNC

Salary $2600-$3000

Location: Ubi

Industry: Electronic Component Manufacturer

Monday to Friday 8.30am to 5pm

Requirements

• Electro-mechanical engineering background preferred and the company will provide necessary training for the candidate to assume this position
• Ability to travel at short notice to S.E. Asia and other markets as required by the superior

Job Roles

Technical aspects

• To inspect, service and maintain our company’s crimping tools, machines and equipment to ensure they remain in tip top condition prior to shipping to our customers
• Provide on-site after-sale service such as repair, replace spare parts and provide technical education to the customers who may encounter technical issues when operating our crimping tools, machines and equipment
• Troubleshoot, analyse and recommend service or repair methodology on the crimping tools, machines and equipment to the customers whenever there is a technical breakdown affecting their production operation
• Overhaul and inspect conditions of crimping tools, machines and equipment returned by the customers
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Description:

We are seeking a highly experienced Quantity Surveyor (QS) with extensive knowledge of Singapore's tender platforms and submission methods. The successful candidate will play a crucial role in competitive tendering, project management, and client communications, ensuring the smooth delivery of awarded projects.

Key Responsibilities:

Expertise in tender platforms and submission processes, ensuring tenders are accurately quoted and submitted based on company strengths and tender requirements.

Attend tender site briefings, preparing quotations that align with project specifications and client expectations.

Design solutions according to client expectations and ensure they are reflected in tender submissions.

Organize and present post-tender clarification meetings, preparing responses and managing client queries.

Submit required tender documents, including organizational charts and project track records.

Conduct online presentations using PowerPoint and other relevant tools, and manage virtual meetings effectively.

Develop and manage project master programs and independently prepare and submit all required client documentation for awarded projects.

Pre- and post-tender, ensure full compliance with all authority requirements, including NEA, PUB, LTA, MOM, SP, and N-Parks.

Understand project requirements and prepare 3D detailed drawings and space planning using AutoCAD.

Complete assigned work within deadlines, maintaining high standards of quality.

Attend meetings with consultants, main contractors, and site stakeholders to ensure project alignment.

Work independently, showing strong organizational and time management skills.

Requirements:

Extensive QS experience in Singapore, with a strong understanding of tender processes, platforms, and submission methods.

Proficiency in AutoCAD for 3D drawings and space planning.

Strong knowledge of PowerPoint and the ability to handle online meetings and presentations.

• Well Established Company
• Basic $ 2700 to $ 3500 + AWS + VB
• No Experience Welcome – Training will be provided
• Working Location: Tuas, Singapore (Company Transport Provided)
• Normal Working Hours

Job Responsibilities:

• Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out incoming process inspection
• Authorise the rejection of parts if found unsatisfactory
• Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers
• Perform factory routine test and check of switchboards completed in the workshop
• Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints
• Maintain good housekeeping in the QA department
• Observe and adhere to safety rules during the performance of every task
• Initiate, recommend, or provide solutions to problem detected
• Control further processing and delivery of non-Conforming products until the deficiency has been corrected
• Follow the procedures of Quality Management System for effective implementation and control
• Carry out other responsibilities as and when assigned by the superiors

Requirements:

• Diploma in Electrical Engineering or equivalent
• Training will be provided for candidate without / with less experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 6pm
• TRAINING PROVIDED

Job Responsibilities:

• Planning / Assign sub-contractors and manpower for the maintenance work and from project handover
• Supervising & Managing of Sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, troubleshooting and upgrading / improvement of system to ensure optimal functioning of BMS/DCS/PLC/SCADA System
• Record servicing & maintenance data and generate service report
• Provide Technical / Operational guidance, engineering solution to the Maintenance Site Facility Management
• Others ad hoc duties as assigned

Job Requirements:

• Minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent
• Knowledge on BMS / PLC / HVAC will be a plus point
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

· Sales and expansion of metrology products

· Managing sales activities with clients and distributors

· Acquire new clients and strengthen business relationships with existing base

· Build cooperative working relationships with distributors and support achievement of sales KPI

· Understand clients’ needs and provide product solutions

· Execute plans to achieve sales goals

· Provide product demonstrations and technical support

· Submit daily reports and sales orders into company system

· Participate in marketing activities, analyze market trends and support promotional activities

Requirements:

· Nitec / Diploma in Engineering / related fields

· At least 1 year of experience

· Understanding of Metrology / Mechanical / related technical fields

· Strong presentation

· Good interpersonal skills and team player

Please include in the CV

· Last drawn

· Expected salary

· Notice period

Interested candidates, please submit your CV to [email protected]

EA License No: 06C4642

EA Reg No: R1110624

All applications will be treated in strictest confidence and only short-listed candidates will be notified

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

The Opportunity

· This is an exciting opportunity to work for one of the leading banks.

· It is an opportunity for an experienced Test Engineer to join their team

· It will start off as a 12 months contract

The Job

· Writing test cases, preparing and creating test data, executing and retesting test cases.

· Able to leveraging on inhouse GenAI for test case creation and enrichment.

· Ensure test runs and results are completed within the given time frame.

· Develop and execute test plans to validate software functionality against requirements and specifications.

· Identify, report, and track software defects and issues.

· Perform functional, performance, security, and regression testing of software products.

· Report test results and defects to the development team and other stakeholders, and work on their resolution.

· Provide suggestions and feedback to improve the quality of the software development process across teams.

· Stay updated with the latest testing tools, techniques, and methodologies.

· Work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations.

The Talent

· Degree or diploma in computer science, engineering, or similar technical certifications.

· Minimally 1-3 years of experience in testing, quality assurance, or similar roles.

· Excellent problem-solving skills, an analytical mindset, and strong communication skills.

· Proficiency in testing tools such as JIRA, Selenium, Appium, and other testing frameworks is preferred.

· Certifications such as ISTQB (International Software Testing Qualifications Board) and CSTE (Certified Software Tester) is advantageous

Next Steps

• Drop your resume and contact us to follow-up, or send your resume to [email protected]

• Email Topic: Apply Test Engineer

• Only shortlisted candidates will be contacted

Cecilia Sim Xin Yang

Personnel Registration No. R22105099

EA Licence No.91C2918

Job Description:

We are seeking a highly skilled Senior Hardware Design and Embedded Systems Engineer with over 10+ years of experience in hardware electronics and embedded systems. The ideal candidate will possess expertise in designing, prototyping, and delivering high-quality hardware solutions for automotive and mobility electronics. This role requires a strong focus on innovation, quality assurance, and project management.

Responsibilities:

Lead hardware design projects from concept to production, ensuring adherence to ISO26262, IEC61508, and SIL standards.

Oversee product estimation, planning, and change management to meet delivery timelines and maintain quality benchmarks.

Collaborate with customers, suppliers, and stakeholders to gather requirements and provide technical solutions.

Manage cross-functional teams, assign tasks, and monitor progress to ensure timely product delivery.

Perform risk assessments, troubleshoot issues, and implement solutions to address challenges.

Execute hardware testing, including unit and integration tests, and validate software-hardware integration.

Prepare technical documentation such as schematics, BOMs, and engineering specifications.

Conduct field failure analysis and provide exceptional customer service.

Key Projects:

Design and validation of automotive electronic systems like electric steering control units and instrument clusters.

Development of mobility solutions such as platform screen doors with advanced safety features.

Embedded product design for two-wheelers, four-wheelers, and industrial automation systems.

Qualifications:

Bachelor's degree in Electronics & Communication Engineering or equivalent.

Extensive experience with embedded systems, microcontrollers, and protocols such as CAN, UART, RS232, SPI, and I2C.

Proficiency in hardware design tools like Altium Designer and OrCAD, along with testing tools such as oscilloscopes and logic analyzers.

Strong understanding of DFMEA, IATF16949, EMI/EMC testing, and reliability assurance.

Skills:

Leadership and team management capabilities.

Exceptional problem-solving and decision-making skills.

Adaptable, self-organized, and passionate about hardware and automotive domains.

Preferred Qualifications:

Knowledge of PMDC and BLDC motor driver design.

Experience with automotive safety standards and compliance testing.

Shall provide Data Centre (DC) operations at the Customer’s premises and premises identified by the

Customer. The DC Operations shall cover the following:

1. DC Environment Support; and

2. DC Facilities Management Services.

DC Environment Support

Shall monitor the facilities infrastructure in the DC to ensure that they are within the operating levels

defined by the Customers. The infrastructure to be monitored shall minimally include:

(a) Power infrastructure (such as Uninterrupted Power Supply and power distribution boards);

(b) Cooling Infrastructure (such as computer room air-conditioning units);

(c) Fire detection and suppression systems (such as FM200, water sprinklers, fire extinguishers);

(d) Environment monitoring system (such as humidity and temperature); and

(e) Water leakage detection.

(f) Shall ensure the DC infrastructure is monitored on twenty-four (24) hours a day, seven (7) days

a week, inclusive of Saturdays, Sundays and Public Holidays.

(g) The Vendor shall inform the Customer within one (1) hour when problems are detected.

(h) Shall work with the Customer and Customer-appointed Supplier to resolve any infrastructure

issues detected in accordance to the support hours as required by the Customer.

DC Facilities Management Services

(a) Shall ensure, through daily inspection, that the general cleanliness and tidiness of the data centre

are maintained by the Customer-appointed Supplier.

(b) Shall work with Customer-appointed Supplier on site preparation tasks such as network cabling

and electrical wiring, when required.

(c) Shall ensure the network cabling in the data centre and within the racks are neat and tidy.

(d) Shall work with the Customer-appointed Supplier for both scheduled and ad-hoc maintenance,

servicing, repair and upgrading works to the infrastructure at the Customer’s premises and

premises identified by the Customer.

(e) Shall plan and coordinate the maintenance activities. This includes polling the affected parties,

obtaining the Customer’s approval, and sending out messages to inform the affected party.

(f) Shall obtain the Customer’s approval before finalizing the plan for any activity.

(g) Shall provide on-site support during the maintenance activities unless otherwise agreed by the

Customer.

(h) Shall maintain up-to-date documentation of the data centre design layouts.

(i) Shall manage the physical security of the data centre in accordance with the guidelines provided

by the Customer.

(j) Shall monitor the following physical security infrastructure to ensure they are within the

operating levels defined by the Customer:

 Security Alarm and Security Card Access System; and

 Closed-Circuit Television (CCTV).

(k) Shall ensure that only authorised personnel are allowed to access the DCs.

 The Vendor shall ensure that all visitors to DCs are escorted during their activities on-site.

 The Vendor shall ensure that the visitors record their activities in the on-site log.

Requirement – DC Operations

Minimum Requirement:

The Vendor shall ensure, through daily inspection, that the general cleanliness and tidiness of the

data centre are maintained by the Customer-appointed Supplier. The DC Operator shall possess

minimally the following skill sets:

(a) Three (3) years of working experience in Data Centre Engineer Operations experience;

(b) Certified Data Centre Facilities Operations Manager (CDFOM) or equivalent; and

(c) ITIL v4 Foundation Certification or equivalent

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Responsibilities

• Support Project Manager on project documentation, system entries and ensuring compliance to project management process and best practices.
• Lead and maintain project management systems and tools
• Ensure compliance of project information and documentation in grant and project management systems.
• Consolidate and analyze project data and create project dashboards and reports
• Track and monitor project health
• Support other operational activities of the Project Management Office as required
• Responsible for managing the life cycle R&D projects and product delivery by planning, organizing, executing, and evaluating from conception to completion
• Ensure successful delivery of project scope and targets while managing project risk, quality, delivery, scope, schedule, and budget.
• Collaborate and motivate project team members in the design, development, and delivery of R&D solutions to customers.
• Drive design / process validation testing and ensure compliance to project lifecycle governance requirements
• Ability to demonstrate a good level of understanding of technical/engineering processes in managing the project development with the project teams
• Lead, monitor and report the progress of a few projects to all internal and external stakeholders.
• Manage and implement project changes and interventions to achieve project deliverables and mitigate risk.

Job Requirements

• Min. Diploma in Engineering or equivalent qualification
• Have some knowledge in project management
• Proficient in Microsoft Office, especially Microsoft excel and Microsoft Word and PowerPoint for presentation of information in a logical approach
• Ability to thrive within a fast-paced environment
• Able to work independently and as a team

We are looking for a Software Engineer to join the regional trading team on a 12-month contract, with the possibility of extension. There is also potential for the candidate to transition to a permanent role depending on performance and business requirements.

About the team:

This team develops advanced solutions for pricing, facilitation, portfolio management, market making, and quantitative analytics to support multiple Equity trading desks and asset classes. The ideal candidate will have hands-on experience in automated Equities trading using C++, as well as a strong passion for modern software architecture and development practices.

Key Responsibilities:

• Enhance and maintain components in a comprehensive system for systematic risk trading, utilizing modern C++ and Python. This includes integrating with q/kdb+ for analytics and building user interfaces for command and control.
• Analyze business requirements from the Equity Line of Business (LOB), design architecture, and develop core components, including low-latency C++ applications for activities like market making.
• Collaborate with the Site Reliability Engineering team to ensure top-tier reliability and scalability.
• Develop extensive experience in C++ programming on Linux platforms.
• Possess a deep understanding of building quantitative electronic trading applications, with preference for those experienced in automated on-exchange market making.
• Work within an Agile development framework and follow best practices.
• Communicate effectively with both technical and non-technical stakeholders.

Desirable Skills:

• Knowledge of Equities, Futures, Options, and FX asset classes, along with algorithmic trading experience in these areas.
• Practical experience with Python development.
• Familiarity with regulatory requirements for trading in APAC markets.
• Experience in architecting applications for Cloud and/or containerized environments.

Argyll Scott Consulting Pte Ltd

Charmaine Soh | Reg No.: R24122333

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

---

One of Singapore’s established MNC company specializing within the Marine Industry providing integrated mooring and rigging services

Location: West (Clementi) - Company transportation provided from MRT

Working Hours: 5 Days Work Week, Mon to Fri (8.30am to 5.30pm)

Job Description:

Report to the Project Director / Manager in Charged of the WTW system.

• Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built documentation.
• Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Job Requirements:

• Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Specific experience in WTW system (Offshore Passenger Transfer System) is highly advantageous
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Ability to speak both English and Mandarin to liaise with Mandarin speaking clients
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software is highly advantageous
• Good understanding of Document Control. Knowledge of ISO9001:2015 QAM system is highly advantageous
• The candidate must be willing to travel and work in marine and offshore environment.

Job description:

• To arrange service visiting, install, repair, troubleshooting, and relocation on site.

• To set up and dismantle equipment for demonstrations.

• To conduct equipment familiarization training for users.

• To answer service enquiries.

• To attend user’s meetings.

• To install and commission new equipment at customer’s sites.

• To prepare service quotations, contracts, report, and invoice.

• To arrange spare parts from suppliers.

• To send / deliver repair item and spare parts.

• To collect equipment for in-house repairs.

• To deliver new equipment to customers.

• To attack and pursue outstanding debts.

• To send faulty parts to vendors for checking and testing.

• To furnish technical information and quality report to Principal.

Job requirements:

• Min. Diploma/ Degree in Engineering/ Science (Mechanical / Biomedical / Electrical)

• Min. 1 years of experience in going clients’ sites to perform servicing

• Experience in medical device servicing is advantageous

For interested applicants, please send your updated resume to: [email protected]

All candidates’ information will be treated with the strictest confidence

Melissa Zhang Zhiqi (Mezzo)

R2197564

Recruit Express Pte Ltd

99C4599