Job Purpose

To take charge as process/product owner role for processes transferred from MF or customers. To deliver KPIs right from process setup, qualification, tapeout, prototype to mass production phase.

Job Description

• To meet key process/product qual milestones set e.g. Tapeouts (NTO/RTO), PRS matching, ERA, WAT/yield matching, HTOL/ESD/Latchup etc
• Co-work with transfer team and Fab modules to deliver robust integrated process to enable a successful production volume ramp from development/pilot stage.
• Key Fab interface role working directly with customers to address their needs, product performance in terms WAT/yield, conference calls and customer audits etc
• Own process FMEA, PCP for processes under your ownership.
• Own SPC and CITs with modules/QA on inline and WAT Cp/Cpk/OOC performances to meet Fab and customer’s index.
• Manage daily ops related logistics in terms of inline/WAT disposition with related parties to enable smooth wafer shipment.
• To co-work with product engineer to perform device/process corner splits to check out product yield window.

Job Requirements

• Bachelor’s Degree preferably in Engineering with semiconductor process or device knowledge
• A minimum of 3-5 years of relevant experience in technology development, product transfer or process integration related scope.
• Good presentation and communication skills
• Independent and adaptable to different culture fast
• Hardworking, adaptable and able to work independently and collaboratively with teams
• Ability to thrive and meet timelines in a fast-paced and dynamic result-driven environment

Job Purpose

To take charge as process/product owner role for processes transferred from MF or customers. To deliver KPIs right from process setup, qualification, tapeout, prototype to mass production phase.

Job Description

• To meet key process/product qual milestones set e.g. Tapeouts (NTO/RTO), PRS matching, ERA, WAT/yield matching, HTOL/ESD/Latchup etc
• Co-work with transfer team and Fab modules to deliver robust integrated process to enable a successful production volume ramp from development/pilot stage.
• Key Fab interface role working directly with customers to address their needs, product performance in terms WAT/yield, conference calls and customer audits etc
• Own process FMEA, PCP for processes under your ownership.
• Own SPC and CITs with modules/QA on inline and WAT Cp/Cpk/OOC performances to meet Fab and customer’s index.
• Manage daily ops related logistics in terms of inline/WAT disposition with related parties to enable smooth wafer shipment.
• To co-work with product engineer to perform device/process corner splits to check out product yield window.

Job Requirements

• Bachelor’s Degree preferably in Engineering with semiconductor process or device knowledge
• A minimum of 3 years of relevant experience in technology development, product transfer or process integration related scope. Fresh grads can be explored with relevant semiconductor device knowledge.
• Good presentation and communication skills
• Independent and adaptable to different culture fast
• Hardworking, adaptable and able to work independently and collaboratively with teams
• Ability to thrive and meet timelines in a fast-paced and dynamic result-driven environment

Responsibilities

• To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples
• To liaise and work with relevant authorities, sub-contractors, main contractor or clients on shop drawings, materials and samples
• Review and align ACMV design drawings to ensure compliance with design specifications and guidelines
• Knowledge in M&E and able to identify discrepancies between M&E, structural, ID, architectural and client provisions
• Manage and execute project as per the deadline
• Attend meeting with subcontractors / contractors / clients to address issues and update progress
• Study and review drawings, specifications for compliance
• Allocate work and ensure jobs are correctly and properly achieved within standards and SOP.

Requirements:

• Diploma / Degree in Mechanical Engineering
• Candidate with more than 10 years of relevant experience will be considered for Senior position
• Preferably candidate with relevant working experience in the Construction Industry especially in ACMV system installation
• Sound knowledge in ACMV System, Local / International Code of Practice / Standard, Green Mark Requirement, Hydronic / Static Calculation, BIM, Revit, Autocad would be an advantage
• Good working attitude and a team player
• Proficient in Microsoft Office

Job Description

• Supervise and coordinate the activities of site contractors;
• Monitor job progress and ensure that civil contracted works meets all practical, commercial, requirements of productivity, quality and contract target completions;
• Ensure all Structural work is carried out within established budgets and schedules;
• Ensure all design work conforms to the codes and standards used by the client, or to agreed industry standards.
• Implement and oversee site projects assigned to ensure smooth project execution
• Manage internal and external contractors well to ensure quality of work and scope of work is within specifications.

Requirements

• Degree in Civil/Structural Engineering recognised by the Professional Engineers Board Singapore
• Min 5 years of HDB new build or JTC projects relevant working experience
• Good communication skills and a team player
• Positive working attitude and highly adaptable

Roles and Responsibilities

1. Planning and coordination, and ensuring schedule aligns with project timelines and client deadlines

2. Understanding regulatory requirements and ensuring that all procedures comply with relevant directives.

3. Preparation in accordance to specified standards to ensure accuracy.

4. Troubleshooting and problem-solving, to identify any issues or non-compliance, and to develop solutions for mitigating any problems.

5. Preparing detailed test reports and documenting any procedures, results and conclusions, and ensuring thoroughness and accuracy while complying with regulatory requirements

6. Communicating findings to relevant stakeholders, including project managers, and regulatory bodies.

7. Stay up-to-date about advancements in techniques and technologies and to implement best practice to enhance testing efficiency and accuracy.

8. Providing training and support to other team members on procedures and standards and educating the organisation about the importance of compliance and its impact on product quality and regulatory approval.

· 5 days’ work week

· Central area near MRT

· Reputable and stable organization

Job Responsibilities:

· Provide pre-sales and post-sales technical support to customers and internal sales team, handling customer NDA and sample request

· Collect customers’ feedback and provide recommendation to customer for design requirements, product enhancements and capture new product opportunities

· Responsible for identifying and clarifying any technical issues related to new or existing products, and clearly communicate findings to the respective business unit

· Hands-on technical support to customers, documenting problems, and suggesting solutions

· Report design, reliability and functional problems to the appropriate groups within company & associate groups and work to solve problems

Requirements:

· Degree in Engineering (Electronics) or equivalent

· 5 years of technical customer support experience in semiconductor industry

· Field experience or hands-on practice or knowledge of multi-disciplinary system design and development

· Knowledge of Smart Card, RFID and microcontroller products; knowledge of physical access control and the security industry is desirable

· Experience with or knowledge of one or more of: CCD, CMOS image sensors, image capture, video standards, image processing

We would like to invite interested applicants to apply.

Thomas Tan

Registration No: 12C6253

License No: R2094900

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

General Overview

This position is part of the site Mechanical team that provides technical/maintenance support to the Operation and Project teams in LNG Terminal. He/she would be mainly responsible for overseeing the safe and reliable operations and maintenance of the Terminal assets from the Mechanical discipline perspective.

The incumbent is also responsible for establishing, reviewing and overseeing the relevant mechanical design elements of new build equipment / asset enhancement activities and implementation of minor mechanical engineering projects, while ensuring the overall mechanical integrity of the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Provide technical/maintenance support and solutions to the terminal operation Teams including supporting the development of maintenance strategy focusing on equipment reliability, compliance, spares inventory requirement, preventive and predictive maintenance programmes and mechanical maintenance procedures for mechanical equipment.
• Lead the maintenance, troubleshooting, repair, commissioning and replacement of mechanical static equipment and piping systems.
• Manages the in-house contractor and equipment vendor to execute mechanical work/improvements within the terminal to ensure safe work execution and gas supply reliability
• Responsible to ensure compliance to applicable regulations/industry best practices, safe to operate, fit for purpose, maintainable and reliable for the site’s modified or newly build mechanical systems (such as marine loading arm, pumps, pressure vessel, safety device , etc).
• Manage and ensure list of statutory equipment (lifting machine, lifting gears, pressure vessel, safety valves, etc) are timely serviced and inspected in accordance to statutory codes and compliance standards
• Perform root cause analysis on equipment failure and provide recommendations to resolve technical issues which may also arise from vibration, RT, UT, oil and other analysis as part of predictive maintenance programmes
• Manage and maintain historical information on static and rotating equipment such as running hours, data statistical information on all plant shut down and loss of production events caused by mechanical systems, engineering documents and review applicable codes and standards for compliance purpose
• Lead technical discussions, execute and manage project schedules and cost and collaboration with external and internal stakeholders, vendors for end of life and improvement project using SLNG Management of Change (MOC) process for mechanical equipment
• Liaise with external stakeholder including government agencies on approval and risk of shutdown of mechanical system that will affect gas-send out
• Participate in RCA, RBI, HAZID, HAZOP, Model Review studies for mechanical packages, co-ordinates and close out Mechanical related issues
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose

Work Experience

• Minimum of 3-5 years’ experience in maintenance of plant equipment, rotating machinery and static equipment, preferably in oil/petrochemical or related industries
• Good knowledge and experience working on different types of in-service pipeline inspection. Knowledge of the LNG / natural gas or other hydrocarbon industries an advantage
• Relevant technical experience in maintenance of mechanical/ machinery systems i.e compressor, pump, pressure vessel, hydraulic components and piping system.
• Conversant with local codes, regulations and standards, equipment inspection and schedule requirements. Certified in API, vibration and other analysis standards will be well regarded
• The incumbent should possess the following personal attributes:

1. A team player who can work well in a team and with good listening skill
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments
3. Willing to take up new challenges and responsibilities

Education

• Bachelor Degree in Mechanical Engineering or other relevant Engineering/Technical disciplines
• Candidates with professional accreditation or affiliation to professional bodies of engineers will have an advantage

Job Description & Requirements

- Administer project planning and project execution
- To study drawings, specifications and contracts to understand project requirements
- Willing to learn and hands-on
- Liaise with client, consultants & main / sub-contractors and coordinate for site activities arrangement
- Perform site inspection and ensure all project activities are performed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner
- Assist in cost control and estimating activities;
- Planning and deployment of resources such as manpower, machinery, equipment and material
- Preparation of report, Method Statements and technical submissions
- Ensure the project complies with regulations and clients’ specifications
- Adhere to safety and health regulations and aim for zero accident in the workplace
- Ensure safety and housekeeping is to maintained to the highest standard
- Prepare job completion record and progress claims
- Continually seek improvements in the work systems
- Ensure all company reports and documentation are completed accurately and on time;
- To perform Ad-Hoc duties as per assigned

- Fresh Graduates are welcome to apply

Our esteemed client, an established MNC, is searching for an QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: 5-day work week
• Working Hours: 8:15 am to 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

SepPure Technologies is a CleanTech company that is revolutionizing the energy-intensive chemical separation processes through the application of novel membrane materials and processes. If you enjoy working in an innovative environment, we have a great opportunity for you. At SepPure Technologies, we believe in making a positive impact on the world through sustainable technology. Our chemical-resistant nanofiltration membranes are disrupting traditional chemical separation processes, such as distillation and evaporation, and reducing global energy use, emissions, and pollution. With up to 15% of the world’s total energy spent on industrial-scale chemical separations, SepPure Technologies’ sustainable process is a game changer. We are currently working on transformative projects edible oil, pharmaceutical, semiconductor, solvents, and fine-chemical industries. Join us on our mission to create a sustainable future through CleanTech innovation.

Role Summary

As a QHSE Engineer / Senior Engineer, you will play a critical role in ensuring our quality, health, safety, and environmental standards are met. This role offers the opportunity to develop and implement robust QHSE frameworks, ensuring compliance while fostering a culture of continuous improvement. You will work closely with cross-functional teams to support operational excellence and sustainability initiatives.

Responsibilities

• Develop, implement, and maintain Quality, Health, Safety, and Environmental (QHSE) management systems in compliance with industry standards and regulatory requirements.
• Conduct regular audits, inspections, and risk assessments to ensure compliance with QHSE policies and procedures.
• Identify areas for improvement in QHSE processes and recommend actionable solutions.
• Ensure the timely maintenance of all assets, including equipment and facilities, and maintain accurate and up-to-date maintenance records.
• Obtain and renew licenses and permits required from regulatory agencies such as NEA, SCDF, MOM, and other relevant authorities.
• Conduct monthly safety briefings, toolbox meetings, and other safety awareness initiatives to foster a culture of safety across the organization.
• Provide regular updates on QHSE status and initiatives through email newsletters and other internal communication channels.
• Coordinate and monitor QC testing (incoming materials, in-process, and final inspections) in alignment with company SOPs.
• Investigate and resolve quality issues, non-conformities, and customer complaints, implementing corrective and preventive actions.
• Prepare and deliver QHSE training programs to promote awareness and engagement across teams.
• Monitor and report on key performance indicators (KPIs) related to quality, safety, and environmental performance.
• Collaborate with internal and external stakeholders to ensure consistent adherence to QHSE standards.
• Maintain up-to-date documentation, including procedures, manuals, and records, for internal and external audits.
• Support new product development and operational initiatives by providing QHSE input during design and implementation stages.
• Stay updated on industry best practices and regulatory changes to drive continuous improvement in QHSE practices.
• Lead emergency response planning, drills, and incident investigations, ensuring proper follow-up actions are implemented and documented.
• Foster a proactive safety culture by encouraging hazard reporting, near-miss tracking, and continuous feedback from employees.
• Perform any other duties assigned to support organizational goals.

Requirements

• Bachelor's degree in Engineering, Quality Management, or a related field.
• 2–5 years of experience in QHSE roles within manufacturing or related industries. (Senior Engineer candidates should have 5+ years of relevant experience.)
• In-depth knowledge of ISO 9001, ISO 14001, and ISO 45001 standards.
• Experience in conducting audits, risk assessments, and implementing corrective actions.
• Strong analytical and problem-solving skills, with a focus on data-driven decision-making.
• Proficiency in Microsoft Office Suite and reporting monthly updates.
• Excellent verbal and written communication skills.
• Ability to work collaboratively in a fast-paced and innovative environment.
• Relevant certifications (e.g., WSH, QMS Internal Audit, or equivalent) are a plus.

Why Join Us?

You will get an opportunity to work in a fast-paced start-up environment, take ownership of tasks, and make a significant contribution to our company's growth. Our internship program will provide you with real-world experience, mentoring, and networking opportunities.

If you're excited about the chance to shape the future of our quality processes and help build a world-class product, we'd love to hear from you.

SepPure Technologies is an equal opportunity employer and is committed to fostering a diverse and inclusive workplace. We encourage applications from candidates of all backgrounds and experiences.

To apply, please submit your CV and cover letter, detailing your relevant experience and interest in the position. We thank all applicants for their interest; however, only those selected for an interview will be contacted.

Role Overview

We are seeking a talented and motivated Mechanical Engineer to join our team. The successful candidate will play a crucial role in the design, development, coordination and supervision of ACMV system. This position involves technical activities, independent thinking and problem-solving skills to contribute to the success of our projects. As a key member of our engineering team, the Mechanical Engineer will have exposure to local statutory requirements, industry standards/norm, project management, equipment selection and costings.

Responsibilities

• Involved in design development, drawings and material submissions for approval, QA/ QC works such as inspection,testing & commissioning, handing over of installation.
• Attend meetings and preparation of reports for site progress and schedules. Coordinate site safety management system.
• Liaise and coordinate ACMV installations with main contractor, suppliers and sub-contractors.
• Supervision and monitor daily site work done, and plan for catchup as required.

Qualifications & Skills

• Degree in Mechanical Engineering or equivalent.
• Minimum 2 years’ relevant working experience in construction.
• Experience in ACMV, chilled water system installation and design. Able to perform basis engineering calculation with MS Excel.
• Good communication, independent and can liaise with main contractor and sub-contractors effectively.
• Good understanding of engineering principles and drawings.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 2 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

Job Requirements :

• Bachelor Degree in Civil Engineering recognised by PE Board ( Singapore )
• Minimum 1 to 2 years of design experience in a local consultant firm
• Graduate engineer with a positive attitude may also apply
• Candidates with ( partial ) overseas experience may be considered
• Conversant with current design codes and design process in Singapore
• Independent and organised, with positive work attitude
• Willing to put in extra effort / time when need arises
• Strong communication skills and effective team player
• Proficiency with ACAD will be an added advantage
• Able to execute submission to relevant agencies / authorities in Singapore
• Able to co-ordinate projects with other team members
• Willing to learn architectural permitting / compliances to Singapore authorities

`

Job Description :

• Support Senior Engineers in the detail design and design coordination of Civil, Structural and Geotechnical projects.
• Responsible for the execution of structural design and drafting works
• Preparation of calculations and review of structural design drawings
• Customer specifications, applicable codes, standards and other generally accepted
• practices.

Responsibilities :

• Design of temporary and permanent works
• Carrying out analysis design of buildings and infrastructure
• Co-ordination of projects including submission to local authorities and liaison during the construction stage
• Liaise with clients, consultant, and authorities on technical matters

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

· 5 days’ work week

· Central area near MRT

· Reputable and stable organization

Job Responsibilities:

· Provide pre-sales and post-sales technical support to customers and internal sales team, handling customer NDA and sample request

· Collect customers’ feedback and provide recommendation to customer for design requirements, product enhancements and capture new product opportunities

· Responsible for identifying and clarifying any technical issues related to new or existing products, and clearly communicate findings to the respective business unit

· Hands-on technical support to customers, documenting problems, and suggesting solutions

· Report design, reliability and functional problems to the appropriate groups within company & associate groups and work to solve problems

Requirements:

· Degree in Engineering (Electronics) or equivalent

· 5 years of technical customer support experience in semiconductor industry

· Field experience or hands-on practice or knowledge of multi-disciplinary system design and development

· Knowledge of Smart Card, RFID and microcontroller products; knowledge of physical access control and the security industry is desirable

· Experience with or knowledge of one or more of: CCD, CMOS image sensors, image capture, video standards, image processing

We would like to invite interested applicants to apply.

Thomas Tan

Registration No: 12C6253

License No: R2094900

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

Job Objectives/Job Summary:

As Project Engineer, he/she has to plan, develop and manage any project that is construction based. He/she has the duty of facilitating the construction designs and ensures that these designs are implemented with utmost safety and that the whole process flows efficiently. He/she has to ensure that the materials in use are safe and that the methods being used are appropriate.

Responsibilities/Duties:

• Assist Project Manager in site supervision.
• Responsible for planning, scheduling, forecasting, conducting and coordinating the technical and management aspects of projects.
• Managing and planning the construction project.
• Assist in project tendering, budget for the project within an estimated cost.
• Controlling the cost of the materials and labor.
• Coordination and checking of engineering deliverables.
• Attend site meeting, inspection and monitoring of project progress.
• Liaising and coordinating with all parties involved in the projects such as consultants, main contractors, sub-contractors, suppliers, local authorities, environmental agencies and federal entities etc to ensure successful implementation of the project.
• Monthly project status reports and change orders.
• To manage the daily operation of the project execution.
• Arm their juniors with relevant information on construction.
• Advising the workers on the construction process and addressing their concerns.
• Solving construction problems as soundly as possible.
• Acting as the quality control and assurance to ensure that the project objectives are met.
• Ensure that all the construction safety rules and regulations are being observed.
• Obtaining the construction materials and verifying them.
• Scheduling the construction work of the day.
• Laying down the preferred construction methods.
• Ensuring that the project starts on time and ends within the estimated duration.
• Ad-hoc assignments.

Job Specifications/Requirements:

• Degree in Mechanical / Electrical / Civil & Structural Engineering.
• Have prior 1 year working experience in construction industry.
• Experience in Additions & Alterations (A&A) works in commercial building upgrading project will be an advantage.
• Must have comprehension for written or verbal graphic instructions.
• Must possess good communication skills.
• Relevant site experience.
• Knowledge in Microsoft office (Excel, Word).
• Knowledge in air-conditioning, ducting, piping, etc and have testing & commissioning experience (for Mechanical field).
• Must have ability to write / understand engineering reports.
• Have excellent problem solving skills
• Good team player and customer-focused with excellent communication skills
• Able to work independently with minimum supervision.
• Able to work under pressure with high initiative.

Selected candidates would have the opportunity to work islandwide projects located in Singapore.

Responsibilities:

· Coordinate and Supervise project work on various site

· Manage project schedule efficiently

· Review M & E Drawings

· Follow up on drawing discrepancies

· Implement project planning, design, material requisition, cost control and documentation

· Ensure smooth progress of works on site and timely completion

· Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

· ITE/Poly/Diploma/Degree in Electrical in any engineering field

· Prior experience in interior fit out works would be an added advantage

· Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)

· Fluent in English, both written & spoken

· Independent, resourceful, pro-active and team player

· Possess good organization, planning and project management skills

· Ability to work under tight deadlines

Job Objectives/Job Summary:

As Project Engineer, he/she has to plan, develop and manage any project that is construction based. He/she has the duty of facilitating the construction designs and ensures that these designs are implemented with utmost safety and that the whole process flows efficiently. He/she has to ensure that the materials in use are safe and that the methods being used are appropriate.

Responsibilities/Duties:

• Assist Project Manager in site supervision.
• Responsible for planning, scheduling, forecasting, conducting and coordinating the technical and management aspects of projects.
• Managing and planning the construction project.
• Assist in project tendering, budget for the project within an estimated cost.
• Controlling the cost of the materials and labor.
• Coordination and checking of engineering deliverables.
• Attend site meeting, inspection and monitoring of project progress.
• Liaising and coordinating with all parties involved in the projects such as consultants, main contractors, sub-contractors, suppliers, local authorities, environmental agencies and federal entities etc to ensure successful implementation of the project.
• Monthly project status reports and change orders.
• To manage the daily operation of the project execution.
• Arm their juniors with relevant information on construction.
• Advising the workers on the construction process and addressing their concerns.
• Solving construction problems as soundly as possible.
• Acting as the quality control and assurance to ensure that the project objectives are met.
• Ensure that all the construction safety rules and regulations are being observed.
• Obtaining the construction materials and verifying them.
• Scheduling the construction work of the day.
• Laying down the preferred construction methods.
• Ensuring that the project starts on time and ends within the estimated duration.
• Ad-hoc assignments.

Job Specifications/Requirements:

• Degree in Mechanical / Electrical / Civil & Structural Engineering.
• Have prior 1 year working experience in construction industry.
• Experience in Additions & Alterations (A&A) works in commercial building upgrading project will be an advantage.
• Must have comprehension for written or verbal graphic instructions.
• Must possess good communication skills.
• Relevant site experience.
• Knowledge in Microsoft office (Excel, Word).
• Knowledge in air-conditioning, ducting, piping, etc and have testing & commissioning experience (for Mechanical field).
• Must have ability to write / understand engineering reports.
• Have excellent problem solving skills
• Good team player and customer-focused with excellent communication skills
• Able to work independently with minimum supervision.
• Able to work under pressure with high initiative.

Selected candidates would have the opportunity to work islandwide projects located in Singapore.

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

As a Sales Engineer / Senior Sales Engineer, you will join our dynamic sales force in developing new businesses and providing professional solutions to our potential clients. Identify new sales opportunities through prospecting.

Job Description:

• Originate and close opportunities to develop new market segments, product groups and channels.
• Identify and canvass new sales opportunities and market through prospecting.
• Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Work closely with General Manager to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Travelling to be expected.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 5 years in marine industry.
• Positive working attitude and self-motivated.
• Preferred who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components MRO.

Additional Information:

• 5 days’ work week
• Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.
• Variable bonus and better medical benefits.
• Career growth & learning opportunity.

Job Description :

• Responsible for all the handshake tests, writeup creation, demo arrangement, sample graphic submission, ICONICS license handling, server arrangement.
• Responsible for Writeup and GUI preparation, Backend development monitoring, server arrangement.
• Designing network architecture, VLAN, network switches and firewall selection, server selection, procurement on network devices, IP assignment, rack assignment, rack power calculation and UPS selection, port assignment
• Monitoring project progress, attending to technical discussions, providing technical support, arranging Software requirement (EMS and MMS), implementing Smart solution
• Getting quotations, PR arranging, PI arranging with BM team, product delivering, attending technical discussions, project progress monitoring, resolving issues
• Selection of licenses, getting quotation from HQ, approving PR, optimizing license requirements, distributing license keys, holding all the license details for past and current projects
• Contacting ICONICS support team, raising tickets to clarify issues, updating status of the issues, arranging monthly meeting with ICONICS, meeting minutes creating and sharing, distributing details of critical fixes, testing new requirements
• Referring technical specs, providing server and license requirement, attending to tender meetings
• Creating and amending technical guidelines for ICONICS, G5, third party integration, graphic creation, project management, D&A, network designing, license selection, server selection, training manual

Requirement :

• Candidate must possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Knowledge of C++/ Phyton/ PLC is needed
• Knowledge in HVAC systems, SCADA software, Building Management systems would be an added advantage

We regret that only shortlisted candidate(s) will be contacted.

Job Responsibilities :

- To develop and maintain business strategies by achieving sales target and increased market shares.

- Visits customer to drive sales pitch and product presentations

- Responsible for achieving sales revenue and profit target

- Align and link business strategies set by company

- Build strong relationship with existing and new customers

- Provide sales and after-sales support, in coordination with our internal departments and customers

- Prepare sales quotations for customer.

- Follow up with after sales issues.

- Market studies and feedback to sales manager

- Monitors sales quotation status and forecast.

- Performs order screening and preparation for clean order processing

- Ensures proper documentation of all sales quotations in line with the ISO standards and processes.

- Participate in any ad-hoc projects as assigned by management and or sales manager from time to time

Job Requirements :

- Diploma / Degree in Engineering

- 3 years of relevant experience

- Experience in Process Instrumentation / Automation Industry

- Experience with MRO Sales an added advantage

- Independent and Team player

- Excellent communication and interpersonal skills

Familiar with CRM and ERPLN

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings, and other documents prepared for the different stages of a project.
• Supervise the installation, testing, and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Correspond with project experience acquired and individual competency in technical knowledge/skills, project management, and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognized by the Professional Engineers Board, Singapore
• Registered with the Professional Engineers Board, Singapore.
• Minimum 3 years of relevant experience in Mechanical engineering design for building services and infrastructure works. Those with more than 5 years of relevant experience may considered for a Senior role.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational, and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous

Requirement

• Diploma/Degree in Information Technology/Computer Science or any related study
• At least 3 years of relevant experience
• Skills on SDLC, CI/CD, Agile

Responsibilities

• Develop, maintain and administer tools which will automate operational activities and improve engineering productivity
• Identify industry best practices/solutions and pursue continuous improvement opportunities in SDLC / SDLC2 (Software Development Life Cycle) processes and practices, relentlessly drive for standardization, automation and self-services.
• Develop reusable, scalable, and testable automation scripts and tools for routine and repetitive tasks.
• Drive alignment efforts between development and operations teams to better recognize benefits of automation and cloud.
• Ability to research, propose and prototype new principles, technologies, tools and concepts and integrated them into the teams collective knowledge.
• Developing CI/CD roadmap and implementing to the projects. Help on AGILE/SCRUM Methodologies while execution.
• Manage and builds EAPI with Unit testing, Code Coverage, Enhancements. Same promote to Production through Jenkins CI/CD Pipeline.

Interested applicants, Please send your updated resume in Word format to [email protected]

Please indicate Job Code 109 on email subject

We regret that only shortlisted candidates will be notified.

IT Consultancy & Services Pte Ltd

EA No: 92C5311 | EA Reg No. R1104129

Please visit www.itcspl.com to learn more information about ITC

Responsibilities:

• Oversee the construction activities and progress, plan, implement, and monitor work
• Schedule following the master and detailed work program
• Liaise with a Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle technical and engineering problems
• Guide supervisors about construction works, ensure progress according to schedule,
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep the site safer and neat
• Supervise ongoing site activities closely

Requirements:

• Diploma in Civil Engineering or equivalent
• must have Lifting Engineer Certification for a Senior role
• Experienced in Singapore underground project, D/wall, and other structural works
• Minimum 2 years of relevant experience in LTA Project is preferred
• willing to work 6 days and/or 5.5 days per week