☑ Basic $ 4500 - $ 5000 Days (Mon – Fri: 08:30am – 5.30pm)

☑ Office Centrally located, Island wide jobsite attended required

☑ Good Benefits + Career Growth

☑ Experience in Fire Protection Project is advantageous!!

Responsibilities:

• Conduct site inspections, gather data, and coordinate with the design team for drawings.
• Verify drawings before construction, addressing customer requirements.
• Coordinate with design team, customers, and subcontractors during construction.
• Inspect and ensure quality work from subcontractors; assist Project Manager in meeting project timelines and safety standards.
• Oversee testing, commissioning, customer training, and final inspections for as-built drawings.

Requirement

• Diploma / Degree in Mechanical Engineering or any related field.
• 1-3years of Project Management experience.
• Knowledge of ISO 9000 standards, problem-solving, and analytical skills.
• Proficient in English, computer skills, and experience with LTA projects preferred.

Interested applicants are welcome to apply online with updated resume to [email protected]

Only shortlisted candidate will be notified

Yvette Kam Soo Leng

Registration: R22107492

Responsibilities:

• Responsible for the design and selection of rotating equipment on EPC projects through the various engineering work phases (i.e. Feasibility / FEED studies and detailed engineering for Offshore, FPSO Projects)
• Plans and directs technical specifications/ standards
• Review all technical requirements incorporated in engineering deliverables.
• Evaluates the technical aspects of bids received from suppliers and concludes technical assessment.
• Assists in placing and executing the orders. Review supplier documents (such as data sheets, drawings) for their completeness, accuracy and compliance. Being the focal point, liaises and coordinates with various stakeholders.
• Oversees the technical and administrative management of the project mechanical team and ensures quality/ schedule of deliverables from the team.
• Provides technical/ engineering support and advice for quality work at site.
• Resolves technical issues using expert knowledge and technical know-how that may arise during the execution of package engineering, fabrication and post delivery.
• Ensures business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behaviour.

Requirements:

• Possess Degree in Mechanical Engineering or equivalent
• At least 15 years of relevant work experience, preferably in the Marine Offshore/ Oil & Gas industries
• Conversant with design standards and International Industry Codes such as ASME, API etc.
• Conversant with specifications and requirements for mechanical rotating equipment such as process gas compressors, screw compressor packages, reciprocating compressors, gas turbines, Sea Water injection pumps and requirements of Industry Codes and Standards, Classification Society rules and all relevant regulatory.

Interested applicants are welcome to submit your resume to [email protected]

EA. R1107675

Agency no. 07C3676

Job Summary:

• As a Service Engineer, you will play a critical role in maintaining the operational efficiency of our equipment.
• Your expertise will ensure that our services remain top-notch, directly impacting our client satisfaction and operational success.

Key Responsibilities:

• Conduct periodic inspections, repair, service and maintenance of Musasino equipment to ensure reliable operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.

Job Requirements:

• Fresher or related marine engineer experience are welcome.
• A minimum of a Diploma in Engineering (Electrical, Electronics, Mechanical, Mechatronics) or equivalent educational background.
• Ability to work overtime and weekends when required.
• Willingness to travel overseas for an assignment as required.
• Ability to work independently and under pressure, delivering quality results within tight schedules.
• Team player.

Highlights:

• Gross Salary: S$3000 to S$4000/ month
• Working Day: 5 days
• Working Hour: 8am to 5pm
• Overtime paid when working outside of working hours (include Weekend/ Public Holiday)
• Dental and Medical Benefits
• AWS

Founded in 2006, IGG is a leading global mobile games developer and publisher committed to making amazing innovative games for players all over the world. Our games are available in 23 different languages, and are enjoyed by 38 million monthly active users from over 200 countries and regions.

At IGG, we are innovators at work, gamers at heart.

We are currently looking for a Server Programmer to join our energetic team in Singapore!

Job description

· Work on server or network related tasks that include but not limited to mobile game server architecture design, modular design, game server end program logic development and maintenance efforts

· Develop game services and supporting applications

· Assess, develop, test, debug, and maintain game services

· Propose creative solutions to meet product goals

· Work effectively in cross-functional teams and collaborate with internal and remote teams to identify, produce, and deliver tasks on time

Job requirements:

· Degree in Computer Science or related field

· 3+ years’ experience in the mobile games industry or equivalent

· Experience with all phases of product development lifecycle, including requirement definition, development, testing, releasing of product(s) and live operations

· Expert in C/C++ is a must, familiarity with C++ as server framework is a plus

· Expert on network protocols: Socket programming, TCP, UDP, HTTP

· Solid understanding of distributed systems and micro service development (SOA, SaaS)

· Expert on SQL and relational database operation

· Preferably with understanding of Unity game engine and C#

· Preferably with Git-related experiences

· Preferably with solid understanding of functional and reactive programming

· Preferably with experience in developing mobile games (iOS & Andriod)

· Familiarity with client server data synchronization (e.g. state/frame synchronization) is a plus

· Familiarity with Golang, protocol buffers would be a plus

Responsibilities:

Working in a team to design and develop a real-time, reliable and secured e-payment devices that processes millions of public transport commuters’ cards daily.

The activities required to be performed shall include the following:

· Requirements gathering.

· Design and develop software applications for embedded devices.

· Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.

· Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.

· Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the SDLC processes.

· Assist day-to-day application support issues.

· Liaise with users on the requirement testing and production issues.

Qualifications & Requirements:

· Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.

· Developed software in at least one full Software Development Lifecycle.

· Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object- oriented software design and UML modelling

· Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).

· Experience in multi-threading, socket programming and serial/USB communication.

· At least 5 years’ experience in object-oriented software development.

· Prior experience in following areas Scrum AGILE methodology process is a plus:

o Scrum AGILE methodology process

o Develop and integrate embedded devices with cloud platforms

o Develop and integrate vehicle side Information Technology for Public Transport (ITxPT) services, like GNSS and AVMS services.

· Strong analytical and problem-solving skills

· Good written and verbal communication skills

· Self-motivated, independent and a good team player

• Develop, test, and debug automated tasks (Apps, Systems, Infrastructure)
• Have a solid technical skill with diversity of thought and creative solutions that are in the best interests of our customers globally.
• Lead and participate in performance tests; identify bottlenecks, opportunities for optimization, and capacity demands.
• Troubleshoot priority incidents, facilitate blameless post-mortems.
• Work with development teams throughout the software life cycle ensuring sustainable software releases.
• Perform analytics on previous incidents and usage patterns to better predict issues and take proactive actions.
• Adhere to firm-wide architecture standards, risk management and security policies.
• Team player and ability to work in Global Team setup, product owners and business team to develop, build & support application.
• Communicate and collaborate on development items with global team, as well as raise/work to resolve issues impacting development.
• Participate in quality assurance, peer reviews and code reviews Qualifications.
• Build processes supporting data transformation, data structures, metadata, dependency, and workload management.
• Good understanding of networking protocols and cybersecurity best practices in public cloud environment
• Advanced working SQL knowledge and experience working with RDBMS, Hadoop, and NoSQL DB.
• Experience performing root cause analysis on internal and external data and processes to answer specific business questions and identify opportunities for improvement.
• Build processes supporting data transformation, data structures, metadata, dependency, and workload management.
• Working knowledge of message queuing, stream processing, and highly scalable ‘big data’ data stores.
• Experience supporting and working with cross-functional teams in a dynamic environment.
• Strong understanding of DevOps practices, tools, and techniques and experienced deploying application in a containerized environment using Docker/Kubernetes/PCF/Openshift/AWS etc.
• Hand-on experience with cloud-based technologies and tools especially in deployment, monitoring and operations, such as Prometheus, Splunk, Elasticsearch, Grafana

• Developing and planning engineering strategies
• checking on paper and site work progress
• conducting project safety briefing
• controlling materials order and usage
• supervising construction team
• increasing company's work quantity and quality
• ensure that structure are constructed in a safety and sturdiest manner
• reporting to director and PM
• liaise with consultants, conractors and authorities
• miscellaneous duties and adhoc works

• Work with users and IT members on a routine basis to troubleshoot reported problems pertaining to application software.
• Identify, log and resolve technical problems of the scope (Incident Management)
• Respond to site to troubleshoot, diagnose and rectify faults.
• Liaise and coordinate the recovery of systems.
• Identify potential changes and system improvements for consideration and implementation
• Create, maintain, and distribute reports of progress to service delivery manager.
• Gather, analyze and assess the client's business requirements and processes evaluate the viability and feasibility of implementing them (including operational and security policies and requirements) and also possible improvements.
• Conduct system functionality testing and work with users user acceptance testing to verify that client requirements are incorporated into the system design
• Support multiple application systems.
• Identify the cause, design, or develop an approach for resolution.
• Communicate and interface with vendors and customers.
• Generate reports and write documentation, e.g. maintenance guide, operation manuals

Requirements

• Degree / Diploma in Information Technology
• Min 3 years of experience with enterprise scale Linux and Windows administration
• Familiar with MySQL, Oracle, and other database servers
• Hands-On experience of .Net framework and Web Services
• Scripting: Windows PowerShell, Unix Scripting will be added advantage
• Able to work well within team and willing to learn
• Good grasp of emerging technology trends
• Start-up focused with an upbeat and enthusiastic attitude

Please send your detailed resume in MS Word format to [email protected] with:

• Education Level
• Working experiences
• Each employment background
• Reason for leaving each employment
• Last drawn salary
• Expected salary
• Date of availability

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Key Responsibilities:

1. Design & Implementation:

• Integrate Azure Sentinel with on-premises and cloud-based resources for comprehensive threat visibility.

• Develop and manage Log Analytics Workspaces and data connectors.

2. Security Monitoring & Threat Detection:

• Create and maintain custom rules, alerts, and automation playbooks.

• Analyze security events, identify threats, and provide actionable recommendations.

• Monitor and manage SIEM dashboards for real-time threat intelligence.

3. Incident Response & Management:

• Respond to security incidents and conduct root cause analysis.

• Coordinate with stakeholders to mitigate risks and resolve vulnerabilities.

4. Optimization & Automation:

• Enhance Sentinel performance by optimizing data ingestion and query performance.

5. Documentation & Reporting:

• Develop and maintain documentation for configurations, processes, and incident responses.

• Generate detailed reports on security incidents, trends, and recommendations.

Qualifications & Skills:

• Bachelor’s degree in Computer Science, Information Technology, Cybersecurity, or related field.

• Proven experience with Azure Sentinel, Microsoft Defender, and Azure Security tools.

• Strong understanding of SIEM platforms and security operations.

• Knowledge of KQL (Kusto Query Language) for writing log queries and analytics rules.

• Familiarity with threat detection frameworks like MITRE ATT&CK.

• Experience with incident response, threat hunting, and SOC operations.

Being client representative for all Process-related activities and installations

Supporting the E.O in getting the necessary information at the battery limits of the package

Ensuring alignment between equipment suppliers and client Specification and Guidance

Reviewing design and technical documentation

Following-up construction & all testing activities falling under the package' scope

Ensure systems start-up and punch list solving

Provide projects support in terms of technical expertise, contractors' management and troubleshooting capabilities.

Facilitating handover process towards the end user

Review documents for ITT process & contractors' selection

Detailed design studies review with contractors, including follow up of yellow reviews, functional specifications, piping and vessel design, 3D-model

Works supervision, Walkdowns performed, FAT, SAT, IQ, OQ + punch list follow-up

Provisional and final acceptances

Final handover for process packages and systems.

Experience in the Bio-Pharmaceutical industry

Perform his/her work in an EHS and cGMP high-demanding environment.

Chemical or Process engineering degree is required.

10 years of experience in the field of Bio or Vaccine Process engineering is required, ranging from early design to facility start-up.

Deep knowledge of commissioning and qualification of similar production trains is a must.

Experience with Centrifugation and Ultrafiltration systems is a must.

• Good degree in Civil / Structural Engineering from a recognized University
• Minimum 5 years working experience in Civil & Structural Consultancy Firm
• Experience in Underground & Bridge structures would be advantages
• Ability to work independently
• Candidates without the relevant working experience but with good academic results may be considered

Job Description

This is a client facing / delivery role, working on cloud operations in the delivery team. You will execute daily cloud operations as well as cloud implementations in technical customer engagements including basic operations and administration, specific implementation projects and/or pilots in Cloud.

The ideal candidate will have experience in delivery roles and success in implementation discussions, hands-on experience with good client handling skills and good team player within the team. The candidate should also be able to provide solutions and technical expertise to fellow team members and in client accounts.

Responsibilities

• Apply technical knowledge, hands-on and customer insights to operate and administrate a cloud infrastructure
• Ensure all configuration conforms to high levels of performance, security, scalability, maintainability, and appropriate reusability and reliability upon deployment, aligning to design documentation specifications
• Ability to codify or implement/deploy configurations with the principles of automation by default in new projects with proper documentations will be advantageous
• Ability to codify or maintain cloud systems in an automated fashion using tools like Ansible, CloudFormation, Terraform etc with proper documentation will be advantageous
• Participate in Cloud Migrations for VMs using tools like CloudEndure, Azure Migrate with more than 20 VMs migration or Databases would be preferred
• Collaborate with team members to engage clients in operational meetings, discussions, process betterment and contribute to optimisations for the client’s environment
• Maintain technical skills, certifications and knowledge of market trends and competitive insights; collaborate and share with the technical community specifically in the cloud space
• Ability to resolve issues with proper resolution/documentation technically and SLAs is required for this role

Qualifications

• Professional Experience - 3+ years of success in operational/administration and deployment/migration projects in Cloud Environment
• Problem Solving. Ability to solve customer problems through cloud technologies
• Collaboration and Communication. Acknowledged helping to provide solutions to issues collaboratively, resolving conflicts and ensuring follow through with proper follow up and closure.
• Technical
  Strong technical experience with cloud infrastructures, migrations, and technology management preferred
  AWS Solution Architect Associate Certification will be advantageous.
• AWS Cloud Practitioner Certification or Azure Certified Administrator or Fundamentals is required
• Subject matter expertise in one or more of the following:
• Competitive Landscape. Knowledge of Containerisation technologies eg EKS/AKS/GKE/K8s/Openshift/Tanzu would be advantageous

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

General information

As a Service Engineer, you will be responsible for executing Service work with low to medium complexity according to work instructions and in accordance with ABB standard processes, quality standards and safety guidelines.

Reporting to Service Manager, you will be delivering quality customer service to satisfy customers. In close co-operation with customer and other ABB teams, take actions to identify new Service business opportunities for ABB.

Health and Safety

• Apply safety rules and safe practices as well as environmental responsibilities
• Report unsafe practices and incidents

Service Delivery

• Execute after sales business activity preventive & condition based maintenance, trouble-shooting, repairs and commissioning.
• Actively coordinate with operation supervisors for optimal service potentials from regular customer interactions.
• Proactively involve in self learning and practical exposure for continuous competence and productivity improvement.
• Maintain high level of personal leadership on safety and quality on work performed as well as documentations.
• Reports early any technical/contract/quality/program/cost issues to management, along with recommendations for resolution.

Additional Requirement

• Understand customer needs & manage customer relationships
• Co-operate actively with other ABB units to achieve common targets
• Support sales team

Leadership

• Provide leadership and coordination for the service team
• Create and develop good team spirit

Continuous improvement

• Proactively identify area of improvement eg. Self-technical knowledge, job safety and etc
• Participate in discussion, meeting, training and e-learning

Your background

• Diploma, ITC or equivalent in Electrical/Electronics engineering with at least 3 years hands on repair and service experience on electrical equipment.
• Experience on LV & MV VFD will be an advantage
• Strong electrical or electronics engineering fundamental knowledge. Knowledge on theory, structure, application, testing methodology and component fault diagnosis/analysis will be added advantage.
• Strong self-discipline with initiative and learning spirit with positive attitude, team work and responsibility.

EMQ2 is seeking a highly qualified Software Development Engineer to join our team and work on projects that impact the lives of many. Our products, including Enterprise Login, Payment Gateways, and Training and Learning Management Systems, are used by over 1,000,000 users. We're looking for passionate professionals to grow and learn with us. If you have more experience, you may be considered for a senior role.

You will be

As a developer on our team, you will have the opportunity to work with the latest technologies and take on challenging projects that will both test and reward your skills. In addition to working on projects that align with your passions and helping you grow as a developer, you will play a key role in the design and implementation of high-quality software systems. Collaboration is a crucial aspect of this role, as you will work closely with other engineering teams, product management, and QA/DevOps to ensure that our products meet the needs and expectations of our customers.

By actively participating in and providing feedback on internal practices, you will also help to drive our commitment to continuous improvement and excellence. This may involve suggesting new ideas or approaches, or providing constructive feedback on current processes. We believe that by constantly striving for excellence, we can provide the best possible products and services to our customers.

Ideally, should have

• Strong communication skills to work with clients and team members
• Passion for learning and growing as a developer
• Grit and determination to overcome challenges and strong problem-solving skills to solve complex problems
• Ownership of work and desire to deliver high-quality solutions
• Capable of understanding the business requirements, working closely with customers, product management, and engineering to develop customer-centric solutions
• Experience in Agile Software Development Methodologies or at least theoretical knowledge and classroom experience
• Experience in Software Development and Design with frontend technologies like ReactJS, NextJS, VueJS or React Native
• Experience in Source Control Management (SCM) tools such as Git
• Experience with web services and RESTful APIs
• Ability to work independently and collaboratively as part of a team in a flexible and fast-paced environment

It would be a plus if you also have:

• Experience working with Design Language System, design patterns and tokens
• Experience in using Continuous Integration and Continuous Deployment (CI/CD) tools
• Experience in backend technology stack like Java Springboot, ASP .NET or NodeJS
• Experience in using and developing with SQL databases (e.g. Microsoft SQL, MySQL)
• Experience in using and developing with Docker
• Experience in using and developing with Amazon Web Services (AWS)

Our Benefits:

• Competitive remuneration package
• Flexible work schedule and remote work options
• Career progression opportunities
• Medical Insurance Coverage
• Open & Transparent Culture with a flat hierarchy

How to Apply

Interested candidates, please send your resume to [email protected]

Our Recruitment Process

After submitting your resume, we will personally review it and invite qualified candidates to take a technical test. The test should take no more than 60 minutes and will be based on the skills required for the position.

If you pass the test, you will be invited for a technical interview with the hiring manager. The interview will be a 60-minute session where we will discuss your experience and knowledge in the field.

Based on the outcome of the interview, the hiring manager will decide if you are suitable for the position. If that's the case, our HR team will contact you with an offer and the next steps.

• Generate new clients and maintain existing clients
• Arrange for zoom/appointments to introduce company with sales presentation
• Handle customer’s enquiries
• Liaise with internal and external departments to ensure client’s requirements is met
• Prepare costing, tenders, proposals and quotations
• Maintain updated record of business transactions with clients and suppliers
• Responds to client’s complaints and feedbacks
• Provide after sales/technical support to clients
• Refer technical issues to Engineer Specialist if it is beyond the current team’s expertise
• Ad-hoc duties as assigned

Requirements:

• Proficient in MS Office Applications
• Min. 2 year of related work experience
• Working Hours: Mon-Fri (8.30am – 5.30pm)
• Location: Tagore
• Salary: up to $6000 + Transport Allowance + Mobile Allowance
• Able to start work immediate or on short notice

How to apply:

Interested applicants kindly state your expected salary, last drawn salary and starting date.

We regret to inform that only shortlisted candidates will be notified.

Log on to www.e-cruitteam.com.sg for more job opportunities!

EA Personnel: Teo Kai Xin, Joey

EA Reg ID: R23114229

EA Licence No.:19C9603

Responsiiblitiies:

• Responsible for the Software Test design and execution for the applications under test.
• Work closely work with the QA Manager, Business/Functional Analyst and Project Manager through the Project Life Cycle.
• Able to perform defect reporting and verification of the fixes.
• Effective Communication with strong interpersonal skills and good analytical, problem solving skills.
• Conduct Test Readiness Review (TRR) to ensure readiness of the test phase.
• Experience in API testing using postman.
• Knowledge of SQL and scripting.
• Hands-on experience and expertise with test management tool.
• Development /scripting skills in programming languages which are compatible for Selenium WebDriver such as Java/C#/Python.

Requirement:

• Bachelors degree in comuter science or equivalent
• Possess 3 to 5 years of experience in Funcational / Automation testing
• Experience in Software Development Life Cycle Process (SDLC) , Software Testing Lifecycle (STLC) ,Test Methodologies and defect life cycle.
• Knowledge and experience in analysing Software Requirement Specification and identifying and creating the required test scenarios, test cases, test data and document traceability matrix to ensure sufficient test coverage.
• Experience in executing test cases and test plans to support the quality assurance activities throughout the software lifecycle.
• Healthcare domain knowledge.
• Experience in testing mobile apps.
• Experience in Automation of Web Applications.
• Good Knowledge in using Version control Management tools such as Bitbucket, GitHub and sound understanding of the code review process.

Shortlisted candidates will be offered a 1 Year Agency contract employment.

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

As a Salvage engineer, the world is your playground. You never know when or where a ship gets into trouble. That is why for a Salvage Engineer literally every day is different. It sounds like a cliché, but it is the reality. As a Salvage Engineer, you will have an adventurous job. When a ship is in distress, you will travel to the emergency scene with a multidisciplinary team. Once on-site, you work together with the team to repair the ship's plant and get the systems up and running again. It is vital to salvage the vessel as quickly as possible. As well as working on actual ship salvage operations.

Your responsibilities as a Salvage Engineer

• As part of the mobile team, provide support to the Salvage Master/Project Manager at site.
• When at base, assisting the technical manager and the operations manager in the selection of new salvage equipment and setting up the right maintenance procedures.
• Maintaining company owned salvage equipment.
• Sharing knowledge with other engineers about complex ship's systems.
• Advising the salvage inspector and superintendent about how to break into existing ship's systems in order to use them during the salvage operation.
• Producing reports about the actions taken to get systems operational again. As you can expect from a leading international maritime service company, you will work with state-of-the-art equipment.

Your qualities
To make your mark as a salvage engineer with SMIT Salvage, you will need a flexible approach; you never know when or where your next project will be. You adapt easily to working with different teams and you are fully proficient in English. Of course, you are happy to work irregular hours and to spend longer periods of time abroad. In addition, you have:

• A minimum degree in any field with experience sailing onboard ships.
• Worked for at least 5 years on modern (merchant) ships.
• Preferably experience with a range of different types of vessels and engine-room plants.
• Willingness to work on weekends and public holidays frequently, with OT and allowances compensated.

Job Scope:

• Perform routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficiency.
• Provide exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues and implement effective solutions.
• Educate clients on proper operation and maintenance practices to extend the lifespan of their chiller systems.
• Prepare and submit detailed reports outlining service activities, findings, and recommendations for future improvements.
• Execute commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.
• Other ad hoc duties assigned

Job Requirement:

• Min Diploma / Degree in Engineering
• Min 2 Years experience in chiller maintenance, commissioning, or related HVAC roles

All interested applicants, please send in your resume to: [email protected]

Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641