COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solars Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for RECs strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, Indias largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

• Drive customer issue resolution activities following the claims management process, i.e. root cause analysis, containment, corrective action, and factory process / quality controls improvements to prevent recurrence of problems and efficacies of detection.
• Process field claims in a timely manner for resolution.
• Work with regional Technical Product Managers to resolve field claims. This includes performing failure analysis and field visits to customer sites/installation.
• Providing timely engineering insights including failure analysis technical reports and presentation.
• Analyze product warranty claim and provide modeling on product service life.
• Collaborate with cross functional teams, contributing to the domain of product FA or characterization.
• Handles customer visits and factory audits and product inspection.
• Develop & contribute to building knowledge base of degradation from product to material level.
• Design tests to detect infant mortality and mid-life product failures.
• Perform investigation including product reliability data analysis, and modeling product performance behavior to identify opportunities in future development or continuous improvements for current technology.

QUALIFICATIONS

• Bach / Masters / Phd Degree in Engineering or Science (Electrical, Mechanical, Physical Sciences)

OTHER INFORMATION

REQUIRED SKILLS

• Problem-solving, failure analysis and trouble-shooting, statistical data analysis and design of experiment
• Application experience in managing (large) data modelling would be favorable
• Excellent practical knowledge and use of Microsoft Office
• Excellent interpersonal skills, strong belief in driving for quality and customer satisfaction.
• Ability to interface and communicate effectively with cross-functional teams as well as external stake holders and external auditors.
• Communicate effectively through presentation and technical reports.
• Enjoys rigors of technical reviews with peers & management to drive to business outcome.

Please note that your application will be sent to and reviewed by the direct employer - REC Group

Description

Acts as a project lead by establishing development plans and preparing for design reviews.

Guides others on engineering tools, test specifications and assesses application of Health, Safety, and Environment techniques during the design process.

Applies and interprets engineering calculations to obtain design solutions and troubleshoot erroneous results. Defines input requirements and develops functional specifications by utilizing basic statistical methods and reliability techniques. Contributes to Halliburton’s Intellectual Property portfolio by delivering innovative and commercially successful solutions.

Creates an impactful relationship with Halliburton’s technical community, customers, and vendors by proactively collaborating with key stakeholders. Participates in professional societies in area of specialization.

Skills acquired through the completion of a degree in Mechanical Engineering or similar discipline.

Requirement

Minimum educational requirement of a doctoral degree and zero years’ experience or a master’s degree and two or more years’ related experience or a bachelor’s degree and four or more years’ related experience.

Location: West

Have AWS & Bonus

Mon to Fri 8.30am to 5.30pm

Good career advancement

Job Description

• Identifying vulnerabilities in our network, server, workstation and so on.
• Implement a comprehensive plan to secure our IT environment.
• Monitoring network usage to ensure compliance with security policies.
• Keeping up to date with developments in IT security standards and threats.
• Collaborating with HQ and our subsidiaries IT team to improve security.
• Documenting any security breaches and assessing their damage.
• Educating colleagues about security software and best practices for information security.

Requirements

• Diploma, Bachelor Degree, Professional Degree in Computer Science/Information
• Technology or other relevant disciplines
• 1-3years relevant experience.
• Basic knowledge of IT skills and good problem solving skills to handle simple troubleshooting

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Responsibilities:

• Preferably with site experience in the construction industry
• Able to perform statistical calculations will be an advantage
• To design for formwork & scaffold solution using CAD software
• To perform quantity take-off
• To perform periodic site inspections
• Keep records of equipment deliveries/returns
• To prepare construction drawings
• Project co-ordination
• Site inspection/ meeting
• Visit site to take measurements and updating of drawings
• 
  

Requirements:

• Min Diploma and above
• Minimum 3 years working experience in design & drafting for the civil & building industry

Responsibilities:

• Prepare Engineering Document (Technical Specification, Calculation, drawings, etc) in the development of new designs and products.
• Generate new drawings and drawing changes including parts lists and Change Orders.
• Perform impact analysis on the arrangement and drawings.
• Plan and organise relevant design changes in cooperation with Ship Design Authority.
• Study/analyse/investigate/develop the design. Prepare technical documentation/guidelines for the work to be performed, according to established formats from the technical database, stipulated budget, time schedule and quality standards.
• Conduct Testing and validate technical interfaces for the work performed, according to established test procedures from the technical database.
• Liaise with ship-owners and Ship Design Authority to obtain approval on engineering deliverables.
• Manage the design schedule and ensure that design is carried out according to contract and regulations.

Requirements:

• At least a Bachelor’s Degree in Electrical Engineering.
• At least 1-2 years experience in engineering design and/or Classifications Societies and/or Naval Engineering Officer.
• Strong knowledge of international design codes, Classification/Statutory Rules and Regulations.
• Keep abreast with Naval Classifications Rules, Military and Industrial Standards relevant to design activities.
• Engineering Design Project Management skills.
• Strong Leadership and Interpersonal skills.
• Software knowledge of AutoCAD
• Only Singapore Citizens will be considered for this position

Other Information:

• Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

The Innovation and Entrepreneurship (I&E) Office at NTU is established under the NTU I&E initiative to drive overall synergy, coordination and interaction among the pillars along the innovation and entrepreneurship value chain at NTU. The Office seeks to accelerate the University’s efforts to translate NTU’s scientific discoveries, innovations and creative work into technological and social entrepreneurship activities that benefit industry and society.

To propel technologies from prototype to market, the I&E Office is looking for a Chief Master Engineer to join the team. The Chief Master Engineer will be the main point of contact for prototyping and minimum viable product (MVP) services in NTU. He/she will spearhead the realisation of minimum viable product (MVP) in NTU to enhance the pipeline of technologies from NTU that successfully move from prototype to validation trials. He/she will establish <The Makerspace>, NTU’s MVP Atelier, as a compelling one-stop hub where NTU facuty, students and researchers get connected to the resources they need for MVP development, verification and validation.

Responsibilities

• Advise, mentor and coach teams on prototype and MVP (minimum viable product) conceptualisation, development, verification and validation.
• Provide hands-on technical guidance and support in the design, building, integration and testing of prototypes and MVPs to ensure their intended end-use objectives are met.
• Facilitate pilot trials to test and validate the performance of MVPs.
• Perform analysis of technology and market trends to identify emerging customer needs and applications of high potential.
• Lead the conceptualisation, planning and development of <The Makerspace>, NTU’s MVP Atelier to be established at the new Innovation Port.
• Manage the resources and funds in <The Makerspace> to optimise prototyping and MVP efforts at NTU.
• Serve as NTU’s main point-of-contact for prototype building and MVP services, providing the vital connection to NTU’s diverse facilities and expertise to empower cross-field research, development, testing and iteration, as well as optimisation of NTU’s in-house facilities and resources.
• Facilitate collaboration of NTU makers’ labs and other research labs/centres to foster synergies of resources and expertise.
• Provide a conduit between NTU faculty/student/ researchers and external design, protoyping and engineering firms / industry partners to facilitate provide the resources for the design, build and engineering of new solutions and products.
• Any other ad-hoc initiatives and projects undertaken by the Office.

Successful candidate can look forward to a rewarding career at NTU with ample opportunities for growth and development.

Requirements

Educational Qualification(s)

• A Master’s degree (or equivalent professional certification) and above in Engineering, Industrial Design or the Sciences.

Relevant Experience

• Minimum 5 years of proven technology/product design/development experience.
• Demonstrated experience in successfully delivering solutions to complex and ambiguous problems.

Knowledge Required

• Proven track record in project / product development / management.
• Some understanding of lean start-up methodologies or entrepreneurship education will be a plus.
• A knowledge of business models, start-up financing and primary market research for customer validation will also be beneficial.

Skills & Competencies

• Ability to apply engineering/scientific knowledge across multiple technical domains.
• Strong stakeholder management skills with an ability to build win-win working relationships with internal as well as external partners.
• Strong analytical skills with an acumen in identifying emerging market and industry trends.

Other Personal Attributes

• Keen interest in diverse design, engineering and technology fields with excellent hands-on skills.
• Resourceful and creative problem solver with an ability to connect the dots.
• Customer-centric collaborative team player with a strong disposition to learn and share knowledge.
• Self-starter with a positive, can-do spirit and growth mindset.

• Planning of overhaul, inspection and trouble-shooting of power plant equipment
• Responsible for all type maintenance work related to steam turbine
• Carry out corrective and preventive maintenance in accordance to the work instruction and procedures
• Contract service supervision
• Possess knowledge and skills on turbine and maintenance at power plant
• Knowledge in specialized area & ability to resolve technical issues
• Complete monthly professional technical analysis (including equipment and technical parameters)
• Understand the status of the equipment (equipment defects and failures that have occurred, and elimination of defects)
• Collect and summarize the work tickets and operation tickets
• Propose solutions to existing problems, report to superior, and seek approval from the management before implementing solutions
• Any other duties and responsibilities as and when assigned by the company

Job Requirements

• Diploma or Degree in Degree in Electrical, Mechanical, Instrumentation engineering or the equivalent.
• Minimum 5 years’ experience on mechanical maintenance of waste management preferred.
• Good communication skills
• A good team player
• problem solving skills
• Experience in Power Plant is an advantage

Location: West

Have AWS & Bonus

Mon to Fri 8.30am to 5.30pm

Good career advancement

Job Description

• Identifying vulnerabilities in our network, server, workstation and so on.
• Implement a comprehensive plan to secure our IT environment.
• Monitoring network usage to ensure compliance with security policies.
• Keeping up to date with developments in IT security standards and threats.
• Collaborating with HQ and our subsidiaries IT team to improve security.
• Documenting any security breaches and assessing their damage.
• Educating colleagues about security software and best practices for information security.

Requirements

• Diploma, Bachelor Degree, Professional Degree in Computer Science/Information
• Technology or other relevant disciplines
• 1-3years relevant experience.
• Basic knowledge of IT skills and good problem solving skills to handle simple troubleshooting

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solars Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for RECs strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, Indias largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

• Responsible for the operations and maintenance of mechanical / process systems as the system owner.
• Perform systematic design, engineering study and solution that lead to optimal performance, stability and reliability of the utilities supply system.
• Ensure effective operation and maintenance without interruption of the installed facilities and equipment
• Responsible for project execution, maintenance costing, operationality and progress control related to facilities system.
• Follow up on projects relating to mechanical systems including but not limited to HVAC System, Exhaust System (Acid / General / Silane / VOC / NOx), scrubbers, Waste water Systems, Compressor System, PCW System, Chilled Water System and Cooling Water System
• Propose expansion/improvement project with concept design for utility areas, coordination with multiple teams to obtain relevant input to be included in the concept and design, and consider HSE, relevant regulations and codes in the intended country, best practices, space management and maintenance as well as daily operations tasks. Prepare technical tendering package for the system and prepare cost estimate and schedule for system.
• Develop and implement energy management program including optimizing energy and utilities usages.
• Embark on cost saving initiatives, feasibility study and map out cost reduction roadmap.
• Manage outsource / external contractors in terms of safety/quality/operation/maintenance effectively.
• Develop & review O&M specification, operating procedures with risk assessment, and ensure all documentation are regularly updated.
• Conduct incident/accident investigation process including troubleshooting, root cause analysis and ensure corrective/preventive actions are completed.
• Responsible for process control, TPM, preventive / predictive maintenance of utilities systems.
• Participate actively in key project such as cost reduction, system improvement, Facilities Cpk improvement, new facilities system development and qualification, new material evaluation/ qualification, etc.
• Conduct monthly meetings to review key KPIs with vendors.
• Conduct frequent site inspections and attend site meetings to ensure high quality standard work and timely delivery in accordance to schedule.
• Ensure compliance to safety, health and environmental rules/regulation/policy with respect to safety, hazardous substance/flammable material management, ERT and permit to work systems.
• Manage work permit application & LOTO
• Ensure system compliance to ISO standards
• Standby 24/7 to response back to company for emergency activation.
• Conduct Facilities System FMEA, RCM & SPC, job observation layer audits and risk assessments.

QUALIFICATIONS

• Possess professional Bachelor Degree in Mechanical / Chemical engineering
• Relevant experience in Mechanical/HVAC/process System for Senior Engineer Position

OTHER INFORMATION

• Good supervisory and leadership skills
• Good technical and analytical skills in problem solving and continuous improvement
• Possess positive work attitude
• Strong sense of responsibility, independence and accountability
• Proactive & assertive team player
• Able to work late for ad-hoc system troubleshooting and breakdown

Please note that your application will be sent to and reviewed by the direct employer - REC Group

Dear All

Our client from Oil and Gas Industry job production center is looking for a Production Engineer for their projects. Mechanical Engineering education with oil and gas job production working experience is required for this job.

Person should analyze manufacturing processes and workflows to identify areas for improvement and implement measures to increase efficiency, reduce waste, and enhance productivity. This includes evaluating equipment, tools, and production methods to streamline operations and improve overall output.

Need to work long hours, and responsible for managing resources, such as manpower, materials, and equipment, to ensure smooth production operations. This involves planning and scheduling work orders, allocating resources effectively, and optimizing resource utilization to meet production targets.

Job Description:

1. Study and review the equipment and Design treatment processes in wastewater treatment plants. Be responsible for the water quality compliance for individual WWTP plant.
2. Assist in maintaining proper maintenance and safety integrity of plant. Ensuring all equipment is in working condition with minimum downtime and regular servicing is carried out
3. Ensure all designated equipment calibrations and inspections are up to date
4. Work closely with PSM team and lab department on waste flow and waste treatment method
5. Assist in promoting WSH activities to operator(s).
6. Assist in optimization of operation treatment, manpower allocation as well as continuous improvement on WWTP operation
7. Ensure the treated wastewater compliance with sewer discharge limit.
8. Adhere to all safety requirements within the plant, such as safe work practices, SOP.

Job Requirements:

1. Bachelor degree in Chemistry
2. Self-motivated, able to work independently and with a team to completion of a task
3. Min 2 years of experience related to water treatment plant

Others:

1. Working hours: Shift (8am – 8pm; 8pm – 8am)
2. Entitled to overtime/shift allowances

• Computer Security Service
• Basic $3000 - $4000
• 5 days (8.30am – 6.00pm)
• Location: Penjuru Lane
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Perform remote standby during weekends, public holidays, and after office hours for Monday – Friday.
• Provide phone/email and on-site (if required) support, resolving, mitigation, troubleshooting and investigating issues pertaining to cybersecurity solutions the company has implemented for its clients.
• Log incidents (either via phone or email) into incident management system (ITSM).
• Track and handle all incidents within client’s SLA.
• Coordinate with stakeholders for service recovery and follow through all the necessary escalation to respective team(s).
• Follow up with client on pending tickets for closure.
• Provide daily handover report after each shift.
• Onsite training during office hours as part of onboarding process and occasional trainings to keep up to date with the product

Requirements

• Professional certifications in Information Technology or related fields.
• Experience or knowledge in Microsoft Windows and Server, Microsoft SQL, Networking and Virtualisation is an added advantage.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

• Marine Electrical Supplier
• Basic $3000 - $3500
• 5 days (8.30am – 6.00pm)
• Location: Penjuru Lane
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Contribute to the team revenue in all aspects of the sales process, including lead generation, customer inquiries, order processing, and post-sales support.
• Maintain strong relationships with existing and potential customers.
• Create sales proposals and quotations, ensuring accuracy, and timely delivery to customers.
• Market Research: Conduct research on market trends, competitors, and customer needs.
• Trade Shows and Events: Assist in the planning, coordination, and execution of trade shows, industry events.
• Administrative Tasks: Maintaining sales records, preparing sales documentation, managing calendars, and coordinating meetings and appointments.

Requirements

• Min Diploma with no working experience are also welcome.
• Training provided.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Responsibilities:

· Provides safety engineering guidance and support to other disciplines, ensuring assurance of technical safety aspects in design.

· Ensures that major hazards are identified, adequately assessed, evaluated and managed in accordance with relevant statutory, client and project specific requirements.

· Identifies where safety engineering elements are not fully integrated into the design and propose solutions to rectify the situation.

· Identifies changes in regulatory requirements and advise relevant departments of requirements to comply.

· Develops specifications, terms of reference and scopes of work for specific safety engineering studies.

· Gathers necessary information and provide inputs to safety studies.

· Develops or support to safety philosophies: Passive Fire Protection, Escape Evacuation and Rescue, ESD,

· Knowledge of Fire & Gas Detection, Fire Fighting Develop or support functional safety management: FSMP, SRS

· Supports the development of ESD and F&G Cause & Effect design.

· Leads hazardous area classification studies.

· Writes procedures, specifications and material.

Requirements:

· Degree in Chemical/Petroleum Engineering with relevant experience in Process/Technical Safety

· An engineering degree with a Master's or Diploma in Process Safety and Risk Engineering, and experience in Technical Safety will also be considered.

· At least 8 years of relevant working experience

· Possess positive and willing to learn attitude.

· Able to multi-task and able to work in a fast-paced environment.

Our Address:

Seatrium (SG) Pte.Ltd.

Tuas Yard

51 Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte.Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Roles and Responsibilities:

• Facilitate user / process owner in defining and specifying project / work scope. He is typically involved in the entire design process and makes decisions throughout, including the technology, type of equipment to use, bid evaluation and supplier selection, the layout of equipment and operational considerations.
• Lead in search, technical review and evaluation of applicable technology, process, equipment and / or material proposals;
• Liaise with the relevant authorities to apply and obtain the required approvals and project permits;
• Schedule preparation, pre-planning and resource forecasting for engineering and other technical activities relating to the project.
• Prepare procurement document including drafting of tender specifications, execution and evaluation;
• Manage consultant, contractors, sub-contractors, suppliers to ensure a successful implementation of the assigned projects. In charge of performance management of vendors.
• Monitor and track the project timeline and budget; Assure the accuracy of financial forecasts, which tie-in to project schedules.
• Liaise with internal functional departments such as Finance and ESH and carry out site inspections to manage and follow through the project progresses;
• Provide technical and engineering support to industrial waste treatment plant operation and process improvement work.

Requirements:

• Degree in Environmental Engineering / Chemical Engineering / Mechanical Engineering
• 5 years of hand on experience in project management of industrial process plant procurement, construction, installation and maintenance turnaround;
• Field engineering and maintenance experience in chemical process plants or industrial waste treatment systems will be an added advantage;
• Self –driven and able to perform with minimal supervision;
• Systematic, analytical and good in writing technical evaluation report; and
• Good interpersonal and communication skills

Job Description:

We are seeking a highly skilled and experienced Design Engineer to join our Design team. The successful candidate will be responsible for designing and developing custom mechanical systems and components for Asphalt and Concrete plants, as well as overseeing their fabrication and testing.

Responsibilities:

• Design and develop custom mechanical systems and components using CAD software (e.g. SolidWorks, Inventor, Creo)
• Collaborate with cross-functional teams including Electrical and Software Engineers, Project managers, and Fabrication Technicians to ensure successful project outcomes.
• Oversee the fabrication and testing of mechanical systems and components
• Develop and maintain project timelines and budgets.
• Perform research and analysis on materials, components, and systems to ensure optimal performance and cost-effectiveness.
• Participate in project meetings and provide technical expertise and guidance as needed.
• Ensure compliance with all relevant safety regulations and standards.

Requirements:

• Bachelor’s degree in Mechanical Engineering or a related field
• Minimum of 5 years' experience in mechanical design and fabrication
• Proficiency in CAD software (SolidWorks preferred)
• Strong knowledge of mechanical design principles and practices
• Experience with the design and fabrication of complex mechanical systems and components
• Strong problem-solving and analytical skills
• Excellent communication and interpersonal skills, ability to converse and write in English.
• Ability to work independently as well as part of a team.

Assistant VP, Data Engineer Posting Date: 5 Jan 2024 Location: Singapore (City Area), Singapore, 048624 Company: United Overseas Bank Ltd About UOB United Overseas Bank Limited (UOB) is a leading bank in Asia with a global network of more than 500 branches and offices in 19 countries and territories in Asia Pacific, Europe and North America. In Asia, we operate through our head office in Singapore and banking subsidiaries in China, Indonesia, Malaysia and Thailand, as well as branches and offices. Our history spans more than 80 years. Over this time, we have been guided by our values - Honorable, Enterprising, United and Committed. This means we always strive to do what is right, build for the future, work as one team and pursue long-term success. It is how we work, consistently, be it towards the company, our colleagues or our customers. About the Department Group Technology and Operations (GTO) provides software and system development, information technology support services and banking operations. We have centralized and standardized the technology components into Singapore, creating a global footprint which can be utilized for supporting our regional subsidiaries and the branches around the world. We operate and support 19 countries with this architecture to provide a secure and flexible banking infrastructure. Our Operations divisions provide transactional customer services for our businesses while also focusing on cost efficiency through process improvements, automation and straight through processing. Job Responsibilities The Data Engineer, Microsoft BI Developer & Administrator , is a member of the Data Analytics Technology team. This role will be responsible for the end-to-end software development and support for all work related to projects, quarterly change requests, L3 production fixes. This includes software product implementation and administration, application design, development, implementation, testing and support. You will be expected to work on Finance & Risk Analytics domain. Key responsibilities for this role are: Lead Server Administration activities for SSAS (SQL Server Analysis Services) & SSRS (SQL Server Reporting Services) for On-Premise implementation Build PowerShell scripts required for processing data in SSAS & SSRS reports Analyse and trouble-shoot SSAS, SSRS, Excel Add In and In-Memory related production issues by collaborating with other technical, vendor and business teams; Drive performance tuning Resolve connectivity issues of MBI solution with underlying Teradata / Hadoop based Data Marts & Enterprise Data Warehouse Handle and maintain BAU deployed applications to ensure stability, reliability, security, performance and SLA monitoring in SIT, UAT and production environment Liaise with the end-user and technical solution team to implement solutions that align with the organization's business objectives. Create frameworks, technical features which helps in faster operationalisation of Reporting solutions Independently install, customise and integrate software packages and programs Manage the technical delivery within timeline and with quality Carry out POCs involving new data technologies Ensure end-user satisfaction and meeting service level agreement Create technical documents such as solution design, program specifications for target solutions Maintain and recommend software improvements to ensure a platform centric management of software applications Work on delivering Change Request and Project implementation for Microsoft PBI solutions Involve in UAT, user training, pre-implementation preparation and post-implementation support activities Maintain and support MBI environment Ability to train users effectively to use the reporting tool, to build, customize & schedule reports Job Requirements The right candidate should possess: Min. 6+ years of experience in implementing SSAS & SSRS development & SSAS administration for On-Premise version of Microsoft Power BI Good knowledge of Power BI Server Architecture, expertise in PowerShell scripting Expertise in designing modular scheduling jobs (e.g. using Control-M) for refreshing SSAS In-Memory Models Expertise in performance optimization for SSAS Tabular models using Direct Query and In-Memory Models Experience in optimizing SSAS design by assessing DAX queries hitting Teradata based Data Warehouse & Data Mart Expertise in Windows / NT and SQL Server Administration - monitoring SSAS & SQL Server statistics Expertise in SSAS design, derived measures, SSRS reports & Data Modeling Knowledge of different code standards for SSAS, SSRS & PowerShell scripting; skills in leveraging reusable code components Experience in creating dashboards, volume reports, operating summaries, and presentations and graphs Hands on experience other BI Tools (Qlik) and Big Data tool stacks Knowledge in Data modelling, working with calculations, leveraging the Set Analysis Ensure incorporation of best practices and lessons learnt from prior projects Have Finance & Risk management domain knowledge Worked in large scale data warehouse & on premise Power BI, Qlik based visualisation Be a part of UOB Family UOB is an equal opportunity employer. UOB does not discriminate on the basis of a candidate's age, race, gender, color, religion, sexual orientation, physical or mental disability, or other non-merit factors. All employment decisions at UOB are based on business needs, job requirements and qualifications. If you require any assistance or accommodations to be made for the recruitment process, please inform us when you submit your online application. Apply now and make a difference.

Your Career

You will work firsthand with our valued customers to address their complex post-sales concerns where analysis of situations or data requires an in-depth evaluation of many factors. You’re a critical thinker in understanding the methods, techniques, and evaluation criteria for obtaining results. You’ll enjoy networking with key contacts outside your own area of expertise, with a strong capability of detailing difficult technical issues to both non-technical and technical professionals.

You will regularly participate in technical discussions with multi-functional teams, creating an environment of transparency that ultimately leads to better products, better working environments, and better cybersecurity. Your quick thinking and support to our clients provides the fast assistance they need to keep their environments secure – which means you’ll need to move quickly, thoughtfully, and provide technical assistance as needed (often, in high pressure situations).

Your Impact

• Provide Technical Support to customers and partners
• Provide configurations, troubleshooting and best practices to customers
• Manage support cases to ensure issues are recorded, tracked, resolved, and follow-ups are completed in a timely manner
• Provide fault isolation and root cause analysis for technical issues
• Publish Technical Support Bulletins and other technical documentation in the Knowledge Base
• Review of technical documentation for training materials, technical marketing collateral, manuals, troubleshooting guides, etc

Job Summary Singapore Contract JN -112023-1951974 Dec 01, 2023 Competitive Job Description Our client is continuously innovating - creating new technologies, products and services that inspire and excite people everywhere. The main responsibilities for this role include: Providing ongoing application support Participating in different stages of the software development life cycle (SDLC) Conducting user requirement analysis Evaluating potential solutions for business problems Participating in system integration testing Planning and coordinating end-user training Building good relationships with business users Working closely with vendors Supporting the team in defining project requirements and tracking progress Providing 24/7 primary application maintenance standby support Guiding and coaching junior team members Experience in: Databases (e.g. Oracle, DB2, MS SQL, MySQL, Teradata, Greenplum) Data repository design (e.g. operational data stores, dimensional data stores, data marts) Data interrogation techniques (e.g. SQL, NoSQL) Structured and unstructured data analytics. Statistical computing programming language (e.g. R). Data quality tools and processes. Data transformation and terminology equivalence mapping. Requirements / Qualifications: Singaporeans Only Degree / Master in Computer Science, Information Technology, Computer Engineering or equivalent 5 Years experience in providing data warehouses or advanced analytics solutions If you are passionate about technology and driven to make a difference, we encourage you to apply today. To discuss this opportunity further, please apply now or get in touch with Maralene Joshua at We regret to inform that only shortlisted candidates will be contacted. Maralene Joshua Implementation Specialist Morgan McKinley Singapore, Talent Solutions EA License No: 11C5502 Personnel Registration No: R2093737

We are looking for Java Developers who are passionate about coding and who want to work on some cutting edge projects in a financial markets environment here in Singapore. Responsibilities Deliver fully tested source code complying with quality indicators objectives Address technical aspects with Tech Lead/Architect and functional aspects with business analyst. Liaise with business analysts for clarification and understanding of requirements. Analyze technical constraints considering functional impacts with technical lead's help Organize and keep up to date detailed technical documentation Provide detailed estimation for development of solutions Develop tests strategy in coordination with project manager / Business Analysts Perform design and code review for other team members Be pro-active and ensure a continuous improvement mindset for the team Requirements 5-15+ years of experience using the core Java tech stack Working experience in Relational databases Experience in Apache Spark or other in-memory data processing frameworks Tools any/all of - Maven/Gradle, Jenkins/Team City, Kafka, Cucumber, Selenium Source management -GIT, TDD using Junit, DBUnit, Jira/QC. Experience in using any of the JavaScript frameworks (ReactJs or Angular) will be an added advantage Knowledge of Docker & Kubernetes will be an added advantage. "Sanderson-iKas" is the brand name for iKas International (Asia) Pte Ltd, a company incorporated in Singapore under Company UEN No.: 200914065E with EA license number 16S8086. Website: www.sanderson-ikas.sg "Personal data collected will be used for recruitment purposes only"

• Assist the Industry 4.0 (i4.0) team in acquiring, managing and implementing proof-of-concept (PoC) projects for customers
• Incubate and prepare new products for technical and commercial readiness to customers
• Provide training of products and solutions where necessary
• Provide ad-hoc support to operational activities where necessary
• Prepare marketing materials for new products and solutions

 

• Supervises site installations, ensuring that installations are on-time and complete, following to the installation schedule, work plan, estimated dealer cost and man-hours
• Works with crews to ensure that paperwork is timely and accurate; that all hours and actions are well documented according to company procedures
• Reviews site installations to ensure the highest quality workmanship; that product is assembled per plan and is leveled, aligned, cleaned and completely detailed
• Ensures that material is handled with care and that customer’s property is protected and undamaged
• Trains crews to have a responsible and technically adept interface with main/sub-contractors, electricians, safety officer, etc.
• Ensures that installations and all service work is closed out in a timely manner; that punch list resolution is followed up and finished to each customer’s satisfaction
• Visits site installations on a regular and daily basis, interfacing with leads and installation personnel, customers, and customer third parties, monitoring the progress and quality of the work being done by the installation staff
• Problem solving during installation

Responsibilities:

• Responsible for carrying out the design tasks and supporting the design activities
• To prepare the Technical Specifications
• To prepare of General Arrangement Plan (GAP)
• To development of new designs and design concepts
• To continue updating the developing and expanding of the design database
• To participate in tests and trials, where required
• To be involved in technical discussion with Owner(s), Classification bodies and suppliers, where required
• To perform on site checking, discussion, where necessary to resolve issues at site with Production, Ship Repair Managers, Consultants, Classification Society Surveyors, Owners etc., where necessary
• To define the material and equipment, and to determine the required scope of supply (material, standards and documentation) for PR
• To prepare drawings/documents as per the contractual technical specification and Classification/Statutory Authorities Rules and Regulations.
• To perform engineering calculation, design and computer simulation analysis
• To ensure equipment specification, technical information, functional description document and installation control document and interface design specification are properly maintained, disseminate and use for the preparation of design work activities
• To update Department Head on work progress/status and shortcomings on technical issues on projects under his charge
• To ensure the quality control in the design / drawing process
• To ensure safekeeping of restricted documents and drawings
• To participate in harbour sea acceptance trials, where necessary
• To keep abreast with current technological developments and products, Classification rules, military and industrial standards and other standards relevant to design activities

Requirements:

• Degree in Electrical / Electronics Engineering
• Relevant experience in Marine or Integration work will be advantageous
• Keen interest in project management and coordination work
• Able to communicate with both internal and external stakeholders
• Only Singaporeans need apply

Additional Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Job Responsibilities

• Design and development of photoelectric sensors

• Using optical design software to design optical systems that include lens, aperture, filters with defined light source meeting sensor specification considering the mechanical and electrical tolerance

• Create detail optical test plan and perform verification and implement countermeasures

• Collaborate with Electronic Engineer to define the light source and Mechanical Engineer on the mechanical parts design

• Collaborate with cross functional teams on new and custom products development, and sustain product lifecycle including customer complaints, components obsolescence, failure analysis, etc.

• Liaising with Headquarter for technical support and technology transfer

Job Requirements

· Master/Degree in Electronic/Optoelectronic Engineering or equivalent

· Minimum 3 years of relevant experience in optical design and development

· Experience on optical system design in optical design software; i.e. ZEMAX / Optical studio

· Good knowledge in photonic design for optical sensor is an advantage

· Strong interpersonal and analytical skills

· Ability to work both independently and in a team environment

· Creative, self-driven and willing to acquire new skills and grow in the position

Job Description

• Provide technical support & maintenance in packaging handling system such as FFS, FIBC, Fanuc robot and conveyors systems lines.

• Troubleshoot controls and electrical equipment; execute the necessary adjustments to bring equipment up to running status.

• Engage in the Loss Prevention System (LPS) to proactively prevent or mitigate losses by leveraging behaviour-based tools and time-tested management techniques.

• Coordinate third party vendors and assist to resolve technical issues.

• Complete detailed service report & attend meeting for the services/maintenances provided.

• Work in compliance with divisional health, safety and lead or participate any accidents/incidents investigation.

• Develop and maintain company controls standard operating and maintenance procedures.

• Maintains spare parts, supplies and equipment required to support the operation and maintenance.

• This Job description is not comprehensive, and all employees must be flexible, and willing to perform other duties as assigned by their supervisor.

Job Requirement

• Bachelor’s degree in engineering, electrical, electronic, or mechanical engineering preferred.

• Minimum 1~2 years of experience programming Programmable Logic Controllers (PLC), and Human/Machine Interfaces (HMI) using Allen Bradley or Siemens software

• Knowledge in the field of Industrial Automation or similar field.

• Ability to read, understand, and create electrical and control schematics.

• Ability to troubleshoot and debug electrical and control circuits.

• Strong cause-effect analytical abilities to solve problems.

• Ability to manage workload effectively, to plan, organize, and prioritize work and meet deadlines.

• Dynamic team player with interpersonal skills.

• Organized team player, able to work independently

• Articulate in communication (English) and with good writing skills.