For over 50 years, SCIEX has been developing groundbreaking technologies and solutions in mass spectrometry and capillary electrophoresis. Our products enable our customers to quickly respond to environmental hazards, better understand biomarkers relevant to disease, improve patient care in the clinic, bring relevant drugs to market faster and keep food healthier and safer. At SCIEX, you’ll find a rewarding role that amplifies your impact on the world and helps you realize life’s potential.

SCIEX is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

Learn about the Danaher Business System which makes everything possible.

Are you looking to use your knowledge and experience to empower our customers to solve the most impactful analytical challenges in quantitation and characterization?

The Manufacturing Test Engineer is responsible for setting up an efficient manufacturing test process by developing procedures (automated testing) to test mass spectrometer instruments and improving First Pass Yield continuously to meet the organization objectives. You will gain new product knowledge of mass spectrometer in theory and practical as well as enhancing your technical competency in engineering fields.

This position is part of the Manufacturing Engineering Department and will be located in Marsiling Industrial Estate, Singapore.

In this role, you will have the opportunity to:

• Develop the commissioning and final tests procedures (automated testing) to meet system requirements.
• Improve and modify manufacturing test software.
• Apply Problem Solving Process to define problem statements, investigate to root causes, verify countermeasures and ensure sustainment.
• Improve the First Pass Yield and parts DPPM failures in Manufacturing.
• Assist instrument installation escalation calls in the field through site visit/remote access if required.
• Expand PCBA troubleshooting skills to detect defective Electrical/Electronics components.
• Perform First Article Evaluation of Electrical/Electronic parts and software.

The essential requirements of the job include:

• Degree in Electrical and Electronics Engineering.
• 1-2 years of experience working in ISO 13485 manufacturing environment. Fresh graduates are encouraged to apply.
• Hands on experience in using measuring equipment like digital multimeter, oscilloscope, function generators, etc. during his/her university studies.
• Understand PCBA manufacturing process, able to read the PCBA schematic diagram and perform troubleshooting.
• Good knowledge in analog and digital electronics is desired.

Travel, Motor Vehicle Record & Physical/Environment Requirements:

• Ability to travel to North America for 1-2 months during project.
• Ability to lift, move or carry equipment up to 10kg daily.

It would be a plus if you also possess previous experience in:

• IPC-610 on Printed Circuit Board Assemble manufacturing process
• Operation and Application on mass spectrometer instruments

SCIEX, a Danaher company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at danaherbenefitsinfo.com.

N/A

At Danaher we bring together science, technology and operational capabilities to accelerate the real-life impact of tomorrow’s science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life. Our global teams are pioneering what’s next across Life Sciences, Diagnostics, Biotechnology and beyond. For more information, visit www.danaher.com.

At Danaher, we value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes.

Responsibilities

• Perform daily scheduled Preventive Maintenance (PM) & Calibration (CAL) activities and provide technical support to Maintenance.
• Generate overall master PM/CAL schedule with down handler monitoring status
• Identify, recognize machine shortfall and attempt to improve on any machine related issues occurring during their daily servicing schedule.
• Responsible in buying off new machines, and work with internal and external stake holders for smooth production transfer to mass production.
• Responsible in setting up and buying off of consignment hardware with identification of constraints and major shortfall of test setup as a whole.
• Establishment and documentation of design rules, improvements or any associated hardware and software where relevant.

Requirements

• Diploma in Electrical / Mechanical Engineering or related field.
• 1-2 years working experience in Semiconductor Industry preferred.
• Able to work individually and as a team.
• Good communication and interpersonal skills.
• Excellent project management, analytical and problem-solving skills.
• Proficient in Microsoft office.
• Able to commit to 12-hour day shift when required.

Minimum 5 years’ experience in the Baking industry.

Diploma/Certificate in Baking.

Good working knowledge of bread, pastries and cakes.

Good working knowledge of Microsoft Excel.

Fair command of spoken and written English.

Knowledge of basic functions of ingredients used in baking.

Willing to learn and take on new challenges and be a team player.

Able to travel periodically when required.

Responsibilities:

• Responsible for new product off-loads and qualification to meet customers' requirements.
• Work closely with customers to analyze and improve product yield and performance, and optimize the testing process.
• Implement and maintain test programs/hardware to support product sort and final test operations.
• Prepare engineering reports and conduct regular technical reviews with customers.
• Development and transfer of test solutions for both Wafer Sort and Final Test to production sites.
• Define, document and specify test process / procedures for new products.

Requirements:

• Bachelor’s Degree in Electronics Engineering or related field.
• Minimum 2 years working experience in similar capacity preferred, fresh graduates are also welcome to apply.
• Good communication and interpersonal skills.
• Excellent project management, analytical and problem-solving skills.
• Familiar with SPC and FMEA, proficient in coding using Python and other related languages.

Job Description

1. Perform site planning, coordination & inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met.

2. Support Quantity Surveyors in conducting site measurement and inspections.

3. Able to plan / coordinate site works and resolve drawing details and discrepancies.

4. Any other tasks assigned by the management.

Requirement

1. Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil/Structural) or equivalent.

2. Minimum 5 years construction experience with experience in civil construction industry.

3. Be able to work independently with minimum guidance and able to work within tight deadlines.

4. Bilingual in English and Mandarin is preferable

Interested applicants, please remember to include the following details for us to conduct a more effective job-matching for you:

1. Work experiences and job responsibilities

2. Current and Expected salary

3. Reason for leaving

4. Date of availability

5. Education background

6. Recent photo

Responsible for organizing and managing project management activities, ensuring that projects are executing smoothly and efficiently against an agreed plan and budget. Handle customer's enquires on the assigned projects and be the primary point of contact between the company and customers. Coordinate the activities of functional departments to support the project.

DUTIES & RESPONSIBILITIES:

- Conduct cost estimation and feasibility study meeting

- Prepare and submit customer final Product Print and components 2D Prin to Document Control

- Organize and chair Advanced Product Quality Planning (APQP) Team meeting

- Establish Process Flow, FMEA, Packaging Specification, Control Plan and Production Information (PPI)

- Prepare Project Schedule and PPI after reviewing with customer

- Work with Tooling Engineer to assign tooling project subcontractor and release Purchase Request

- Lead APQP Team in reviewing Design Concept and preparing the design for manufacturability and Assembly (DFMEA)

- Review design with customer

- Establish Error Proofing, Productivity and Yield

- Monitor and tracking closely on all tool-up progress, tool repair/modification and all drawing updates to ensure schedule compliance

- Submit sample and PPAP report to customer and progress tracking

- Update and release PPI and Process Flow Chart upon PPAP approval

- Conduct hand over meeting

REQUIREMENT:

- Degree / Diploma in Precision Engineering, Mechanical Engineering or Manufacturing Engineering

- Min 3 years experience with basic knowledge in Unigraphics, Solidworks, Molding & Tool making

Job Description

Job Responsibilities:

· Assist the Project Manager in supervising project(s) comprising design, purchasing, quality control, production, and commercial.

· Coordinating drawing approval between classification, designer, and third parties

· Recommend, review & approved design specification

· Responsible for execution of works control as per the project schedule that is planned by the Project Manager or himself

· Clients facing from start to end of project be it site inspection/feasibility/visits, operational requirements such as solar system design and execution

· Vendor management to ensure the project is on schedule

· Provide inputs on accomplished schedules, manpower, machinery, and equipment status to the Project Manager as well as project progress reports

· Costs benefits analysis on proposed project designs and suggesting cost reduction analysis for solar systems

· Administrative files and documentation where applicable

Job Requirements:

· Diploma/Degree in Civil/related engineering discipline/renewable energy

· Min. 2 years of relevant experience in similar industries/fields handling HDB-related projects/renewable energy/solar photovoltaic

· Excellent communication and interpersonal skills to convey technical concepts clearly & effectively

· Proactive, energetic, adaptable, analytical & problem-solving abilities

· Able to work independently in a fluid environment

Element has an opportunity for an Calibration Engineer to join our rapidly expanding team.In this role, you will manage the equipment calibration within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore. The Calibration Engineer is responsible for calibrating equipment and maintenance of records throughout the Element Singapore and Malaysia business units.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Calibration of Equipment: (a) Perform regular calibration of testing and measurement, equipment to ensure accuracy and compliance with standards. (b) Verify and adjust instruments to meet technical specifications and industry guidelines.
2. Documentation and Reporting: (a) Maintain detailed calibration records, including test results, adjustments made, and equipment performance trends. (b) Generate calibration certificates and reports as required.
3. Compliance and Standards: (a) Ensure all equipment adheres to international, national, and organisational calibration standards (e.g., ISO/IEC 17025). (b) Support audits by providing necessary calibration documentation and demonstrating compliance.
4. Equipment Maintenance: (a) Monitor the performance of equipment to identify potential calibration or maintenance needs. (b) Conduct preventive maintenance and troubleshoot issues to minimise downtime.
5. Procedure Development: (a) Develop, review, and refine calibration procedures for various equipment types. (b) Standardise processes to improve efficiency and reliability.
6. Collaboration with Teams: (a) Work closely with the Quality team and Operational teams to address calibration needs. (b) Provide technical support and guidance to resolve instrument-related issues.
7. Training and Knowledge Sharing: (a) Train team members on proper calibration techniques and the importance of maintaining equipment accuracy. (b) Stay updated on new calibration methods, tools, and industry advancements.
8. Risk Management: (a) Identify risks associated with uncalibrated or faulty equipment and implement strategies to mitigate them. (b) Perform root cause analysis for calibration failures or discrepancies.
9. Inventory Management: (a) Maintain an inventory of calibrated tools, instruments, and reference standards. (b) Schedule periodic calibration and ensure timely replacement of outdated or damaged equipment.
10. Data Analysis and Trend Monitoring: (a) Analyse calibration data to identify trends, deviations, or potential areas of improvement. (b) Recommend corrective actions to improve equipment reliability and accuracy.
11. Regulatory Support: (a) Assist in external and internal audits by providing accurate calibration records and ensuring compliance with regulatory requirements.
12. Innovation and Process Improvement: (a) Propose and implement enhancements in calibration methods, technologies, and practices to increase efficiency and accuracy

Job Requirements:

• Minimum Bachelor Degree in in Materials Science or Materials Engineering
• Experience of working in an ISO / IEC 17025 calibration environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Ability to collaborate with colleagues and work effectively as part of a team.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

HOYA Technosurgical, is a subsidiary of HOYA Corporation, established in Tokyo, Japan in 2013, which has the origin of PENTAX medical business unit in 1974 arising from the merger of former PENTAX medical business unit & Japan Universal Technologies, Inc. HOYA Technosurgical has set up their first overseas plant in Singapore focusing on manufacturing, research & development and sale of Chromatography Media to pharmaceutical companies.

Job Responsibilities

• Support in the setup of manufacturing facility and process documentation
• Build and train Operators in the operations of machinery and maintenance in compliance with GDP, quality and other relevant company’s standard
• Achieve efficiency, productivity, safety, and quality for assigned processes
• Propose solutions to improve productivity and lead time
• Ensure regular maintenance of machineries to prevent machine down time. Monitoring the efficient, feedback to manager and related department
• Responsible for troubleshooting of daily operations issues
• Investigate and implement preventive actions at source
• Leading of yield/productivity improvement or cost reduction project
• Support Production and Final inspection process validation activity in IQ, OQ and PQ, which the validation of mass-production equipment, with approved development specification and plans
• Other activities as assigned by the supervisor

Education Qualification:

Diploma or Bachelor in Engineering (either industrial engineering, system engineering, mechanical, chemical)

Experience:

0 – 4 years or more experience(s) in chemical or medical devices industry

Functional Competency:

• ISO9001 and 14000
• Relevant working experience in process control and manufacturing operations
• Computer literate, proficient at Microsoft office
• Effective communication in English is essential and Japanese is a plus.
• Able to collaborate well within department to execute project tasks.
• Good analytical skills
• Ability to lead and coach team members

The Process Engineer will spearhead the design, implementation, and optimization of wastewater treatment processes within our projects. This role collaborating with various departments, and implementing cutting-edge technologies to advance project goals. This role requires a deep understanding of chemical, physical, and biological treatment methods, strong project management skills, and a commitment to environmental sustainability.

Roles & Responsibilities:

• Develop detailed process designs for complex wastewater treatment projects.
• Lead pilot studies and data collection efforts to validate process concepts.
• Create process flow diagrams (PFDs) and piping and instrumentation diagrams (P&IDs).
• Perform detailed calculations related to plant process design and prepare system operation & control philosophy.
• Work closely with multiple disciplines to ensure quality and competitive proposals are developed and delivered on time.
• Support Business Development on technical presentations and/or meetings with potential or existing clients.
• Participate in preparing the design specification, Bill of Quantity (BQ), and Request for Quotation (RFQ) and assist in selecting equipment and components.
• Assist in project implementation, including process-related document preparation and technical clarification with client.
• Participate in testing and commissioning work.
• Any other works as instructed by the company management.

1. Manage the team of RTOs, supervision of site set up, earth works, drainage works and reinstatement works

2. Report to Qualified Person

3. Prepare weekly reports and monthly reports.

4. Attend the meeting with client and consultants

5. Report any non-compliances to Qualified Person

6. Ensure the site Safety

Introduction to GlobalFoundries
GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF
Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

Why This Role
As the ideal candidate, you will leverage your analytical and problem-solving skills and play a vital role to fuel our growth. Your role will span across existing and new Fabs, improving processes and thereby wafer yields, increasing manufacturing productivity that are key to achieving Fab excellence. Coaching Associate Engineers (AEs) will also be part of your job responsibilities.

What You Will Do

• Maintain and support equipment readiness in capacity of either an individual contributor (as directed and/or independently), or as a manager.
• Perform preventive maintenance (PM) and troubleshooting of equipment
• Execute maintenance and tool support ensuring equipment readiness
• Troubleshoot and upgrade of equipment ensuring minimize downtime
• Analyze and monitor technical charts
• Drive equipment improvement plans and projects
• Ensure and follow good safety practices and custody of tools, equipments and other properties
• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements
• Work and collaborate other projects and/or assignments as needed

What You Will Need

• Bachelor’s Degree in engineering or equivalent
• At least 2 years of relevant experience in equipment engineering, preferably in a wafer fab / Electronics / Electrical industry
• Proven ability to identify, assess and solve problems
• Perform Normal / Swing Shift (or 12-hour rotating shift if required)

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

• Reports to Utility Manager
• Coordination between sub-contractors and construction team on excavation works, services diversion, and reinstatement works.
• Provide update of the progress of works in the construction site.
• Supervise subcontractors’ works as per work plan, timeframe, and as per required quality standard of work output.
• Monitor utilities and M&E work executed are in accordance to statutory requirements, construction procedures, and safe work practices.
• Assist other Engineers in preparing the programming of works, scheduling, and monitoring the progress plan.
• Any related works as assigned by superior

Job requirements:

• Bachelor’s Degree in Civil Engineering or equivalent
• Minimum of 2 years’ relevant experiences as Utility Engineer
• Candidate with relevant LTA infrastructure project experience is an advantage
• Knowledgeable with various Utilities, M&E works
• Self-motivated, independent individual and possesses great initiative
• Good interpersonal skills
• Proficiency in using Microsoft Office and Auto CAD is an advantage
• Location: Woodlands
• Project: Viaducts

Element has an opportunity for Lab Engineer for Singapore. In this role, you will be involved in project plan, coordination, operation for soil investigation works. Attend the project meeting if required. Day-to-day site operation to ensure works are constructed as per project & safety requirement. Identify the soil/rock & record the field log. Take the soil sample for lab test. Supervise site works. Liaise with clients on site works / projects. Plan and arrange the Logistics

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Schedule the testing programmes according to priority
• Execute the soil testing works to determine the physical and mechanical of the soil samples: Supervise the technicians to prepare the correct samples for soil testing (e.g., check the assignment and UD soil samples)
• Carry out extrusion of the soil samples
• Liaise with clients for samples that are unable to meet their requirements for their decision-making
• Carry out the soil tests according to BS standards or standards specified by clien and submit the approved soil testing reports to clients

Job Requirements:

• Degree in civil engineering or geology, certificate in Site Investigation for Supervisors (BCA) is an advantage with 2 years’ relevant experience in major infrastructure projects
• SEC(K) Higher skill will be an advantage
• Physically fit and able to withstand the challenging working conditions
• Strong and determined quality focus with indefatigable determination to get the job done under the most challenging conditions and meet tight deadlines with minimum supervision
• Self-motivated team player with excellent organisational and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Responsible for tooling drawings, specification filing and maintenance. Manage projects, ensure all tooling are executed smoothly and efficiently against an agreed plan. Perform evaluation and development activities to provide solutions for technical problems to sustain and improved production yield, quality, process cycle-time and cost reduction.

Ability to lead a group of Chinese Toolmakers and Technicians to ensure all molds repairs and maintenance meets all IATF 16949 standards and Customer Specific Requirements, including but not limited improving ensure product quality and manufacturing capabilities, eg Cpk Study.

• Managing the design of utilities diversion route, supporting structure and other required structure.
• Coordinate with authorities to facilitate the work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with approved subcontractor for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement
• Preparation of tender for subcontractor of utility
• Preparation of CIAR(construction impact assessment report) for PUB/LTA with subcontractor
• Establishment of overall utility plan including short & long term
• Management of each activity for utility work on site
• Preparation & coordination with subcontractor for NCE(notification for commencement of earthworks)
• Approval for PTD(permit to dig) related utilities
• Pegging and demarcation for utilities on site
• Regular inspection / petrol / visual check for existing utility
• Establishment of emergency plan for utility
• To check daily, weekly and monthly progress report before submission
• Must be able to work 5.5 days per week
• Bachelor Degree in Civil Engineering or equivalent
• Minimum 2 years engineering experience in large scale and complex project

Element has an opportunity for Lab Engineer for Singapore. In this role, you will be involved in project plan, coordination, operation for soil investigation works. Attend the project meeting if required. Day-to-day site operation to ensure works are constructed as per project & safety requirement. Identify the soil/rock & record the field log. Take the soil sample for lab test. Supervise site works. Liaise with clients on site works / projects. Plan and arrange the Logistics

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Schedule the testing programmes according to priority
• Execute the soil testing works to determine the physical and mechanical of the soil samples: Supervise the technicians to prepare the correct samples for soil testing (e.g., check the assignment and UD soil samples)
• Carry out extrusion of the soil samples
• Liaise with clients for samples that are unable to meet their requirements for their decision-making
• Carry out the soil tests according to BS standards or standards specified by clien and submit the approved soil testing reports to clients

Job Requirements:

• Degree in civil engineering or geology, certificate in Site Investigation for Supervisors (BCA) is an advantage with 2 years’ relevant experience in major infrastructure projects
• SEC(K) Higher skill will be an advantage
• Physically fit and able to withstand the challenging working conditions
• Strong and determined quality focus with indefatigable determination to get the job done under the most challenging conditions and meet tight deadlines with minimum supervision
• Self-motivated team player with excellent organisational and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

• Managing the design of utilities diversion route, supporting structure and other required structure.
• Coordinate with authorities to facilitate the work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with approved subcontractor for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement
• Preparation of tender for subcontractor of utility
• Preparation of CIAR(construction impact assessment report) for PUB/LTA with subcontractor
• Establishment of overall utility plan including short & long term
• Management of each activity for utility work on site
• Preparation & coordination with subcontractor for NCE(notification for commencement of earthworks)
• Approval for PTD(permit to dig) related utilities
• Pegging and demarcation for utilities on site
• Regular inspection / petrol / visual check for existing utility
• Establishment of emergency plan for utility
• To check daily, weekly and monthly progress report before submission
• Must be able to work 5.5 days per week
• Bachelor Degree in Civil Engineering or equivalent
• Minimum 2 years engineering experience in large scale and complex project

Job responsibilities:

• Assist the Sales Team in reviewing technical documents and providing feedback.
• Prepare accurate cost estimates based on customer specifications and drawings.
• Generate quotations and perform follow-up actions to close sales.
• Provide technical and engineering support to sales personnel.
• Respond promptly to customer inquiries and technical specifications.
• Offer technical assistance to customer service related to product issues.
• Monitor and update the status of sales quotes and proposals.
• Update and maintain the costing master list.
• Assist in sourcing new materials and suppliers as required.
• Ensure compliance with QMS (Quality Management System), EHS (Environmental Health and Safety), and L&E (Labor & Ethics ) procedures.
• Support various sales-related projects and tasks as assigned.

Requirements:

- Diploma in Mechanical Engineering

- Preferably with 2 – 3 years working experience in the printing/label industries an advantage

- Proficient in Microsoft office and IT savvy

- Driven with positive mentality, strong initiative and a team player

- Resourceful, meticulous, willing to be hands on

- Possess strong communication, interpersonal, coordination and customer service skills

- Willing to learn and able to work under pressure in a fast pace environment

Responsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTOResponsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

· Degree in Civil/Structural Engineering (recognized by Singapore PE Board)

· Minimum 5 years’ of precast experience in commercial and condo building projects

· Meet customers and generate enquiries to develop potential spare parts / maintenance contract business, build and develop assigned accounts and relationship, site assessments, etc.

· Hunt for new potential customers, via cold calls, to meet and exceed sales order Intake.

· Promote sales of new pumps / replacements, spare parts (i.e., pump parts and mechanical seals) and maintenance contracts, to new and existing customers.

· Attend promptly to enquiries and understand customers’ needs in order to fulfil their requirements.

· Validate on commercial and technical requirements before generating quotations to customers, with close follow-ups up till quotation status being closed.

· Assist Sales Manager in strategic planning and statics collection for the sales progress.

· Correspond with factories, KSB companies and contractors / dealers for support; in relation with terms of price, technical support / service, and delivery.

· Utilise and update CRM (C4C) database on registered products to installed base and customer visits records.

· Ensure proper handover of purchase order (in terms of technical and commercial with supporting document / costing sheet) to sales admin for order processing.

· Any other ad-hoc duties as per assigned by HOD.

Responsibilities:

1. Mandatory Reporting & Compliance (ECA, WEMP, GHG, etc.)

• Prepare and submit Energy Management System (EnMS) reports.
• Ensure compliance with Minimum Energy Efficiency Standards (MEES) for water-cooled chilled water systems.
• Update and submit the Energy Efficiency Improvement Plan (EEIP) and Energy Reports as per regulatory requirements.
• Conduct annual energy reviews and support ISO50001 certification processes.
• Monitor and report water usage including recycling and reuse systems.
• Analyze GHG emissions data monthly and prepare yearly submissions for third-party verification.
• Report on Corporate Environmental Performance Management (CEPM) and align with Net Zero and Renewable Energy targets.

2. Corporate Environmental & Sustainability Initiatives:

• Track and report environmental indicators such as power, water, and waste consumption.
• Develop gap analyses and enhancement plans to improve eco-efficiency and recycling rates.
• Support corporate audits and sustainability projects, and environmental goal tracking.

3. Facility Monitoring & Data Management:

• Integrate facility monitoring systems into the Maintenance Management System (IFMS Dashboard).
• Develop automated preventive maintenance schedules and inventory tracking.
• Oversee daily monitoring logs and production support using SharePoint for data analysis and reporting.

Requirements:

• Degree in Environmental Science, Sustainability, Engineering, or a related Engineering field.
• Proven experience in Energy Management, Environmental Sustainability, and Corporate Responsibility reporting.
• Strong technical skills in data analysis, with proficiency in tools such as BMS, SharePoint, and digital metering systems.
• Excellent communication and reporting skills with attention to detail.
• Experience in maintenance management systems and facility monitoring tools.
• Knowledge of regulatory frameworks such as NEA and PUB compliance standards.
• Familiarity with ISO50001, GHG Protocol, and other sustainability frameworks will be an advantage.

Responsibilities:

- Systems design and selection of equipment instrumentation and controls.

- Reviewing of customers’ specifications requirement and drawings.

- Define specifications and scope of work to contractors.

- Startup, testing, commissioning and troubleshooting of plants.

- Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control. - Responsible for Single Line Drawing, Control Schematic drawings. - Develop engineering capabilities and work with sales team on project proposal and bidding.

- Reviewing of customers' specifications and drawings.

- Execution of projects.

- Preparation of tender activities.

Requirements:

- Recognised degree by PE Board in Electrical / Instrumentation Engineering.

- Minimum 3 years relevant working experience, preferably with experiences in FEED of LV/MV switchboards, MCC, MCB, Control Panels etc and in Water & Waste Water industries.

- Knowledge in Instrumentation and Control.

- Able to read & understand single line diagram and generate Bill of Materials from single line diagram.

- Knowledge on control, schematics, motor controls and materials take-off.

- Proficient in AutoCAD, Microsoft Office.

- Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage.

- Those with relevant project management, process design, and service & maintenance experience will be an added advantage.

*** Please apply with detail resume, stating present and expected salary, date of availability and/or notice period required.

Job Description:

• Oversee the day-to-day operations of facilities, ensuring a safe, efficient, and well-maintained environment.
• Coordinate maintenance and repair activities for buildings, grounds, and equipment.
• Manage relationships with external vendors, contractors, and service providers.
• Implement and enforce health and safety protocols.
• Identify cost-saving opportunities, and ensure fiscal responsibility.
• Implement energy-saving initiatives and sustainable practices.
• Implement and promote environmentally sustainable practices.
• Address tenant or employee concerns related to facilities.
• Maintain accurate records of facility-related activities.
• Generate reports on maintenance, expenditures, and key performance indicators.
• Execute maintenance projects, including preventive maintenance, equipment upgrades, and infrastructure improvements.
• Follow project scopes, timelines, and budgets, ensuring that the project milestones are met.
• Coordinate with internal teams to ensure the timely completion of projects.
• Monitor and report project progress and suggest necessary adjustments to ensure objectives are achieved.

Qualifications:

• Diploma or Degree in Engineering or equivalent.
• Minimum 2 years’ experience in M&E.

Overall Job Objectives

Assists the PM to oversee the construction activities, progress, planning, implementing, and monitoring of work schedules in accordance with the master and detailed work programme

Core Responsibilities

1. Attend site meetings and inspection

2. Preparation of documentation including project status report, method of statement and work procedure for the project.

3. Planning, executing, monitoring and control of the project.

4. Liaising and coordinating with all parties such as clients, consultants, consultants’ representatives, site supervisors, and sub-contractors

5. Handing of technical and engineering problems

6. Supervise ongoing site activities closely

7. Ensuring that the quality control of the project is met

8. Ensure that all the construction safety rules and regulations are being observed

9. Prepare necessary work and safety permits, submission documents and drawings once work are completed.

10. Any other ad-hoc tasks assigned

Job Specifications

1. Degree in Engineering or related disciplines

2. Able to read/understand/execute work based on construction drawings

3. Good communication, interpersonal and collaboration skills

4. Minimum 3 years of relevant experience.