Position: Production Test Manager

Salary Range: $10,000 – $12,000

Working Location: Tai Seng

Working Days: 5days (office hours)

Job Requirement:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Job Requirement:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Responsibilities

• Conducts set-up, calibration, testing, and troubleshooting of circuits, components, instruments, and mechanical assemblies.
• Develops and defines test specifications, methods, and procedures based on blueprints, drawings, or diagrams.
• Tests and resolves issues in assemblies and final systems, performing rework as needed following testing outcomes.
• Compiles technical reports summarizing results and proposing solutions to technical challenges.
• Supports the selection and configuration of specialized test equipment when necessary.

Requirements

• Diploma or Degree in Engineering Discipline
• At least 1 year of semiconductor equipment maintenance and troubleshooting experience.
• Candidate must be open for rotating shift work (Day / Night Shift) on a monthly or quarterly rotation.
• 5 Working Days
• Candidate must be comfortable working in a cleanroom environment.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

The client is the world leading semiconductor company from USA. It is ranked as one of the “Top Best Places to Work in Singapore”. Below position is open urgently.

Position: Test Engineer (Contract – 12 months)

Location: Bendemeer

Working Hour: Mon to Fri, 830am to 530pm

Responsibilities:

• Directs and coordinates engineering activities concerned with development, installation, and qualification of Enterprise NVMe SSD products.
• Coordinates operational and functional phases of tests.
• Analyzes and interprets test data with logical troubleshooting and debugging based on interpreted test data.
• Review, code and debug test scripts in Python with a constant improvement and test-driven mindset.
• File Issue tickets and follow-up with other teams to drive to resolution.
• Prepares technical reports for use by engineering personnel.

Qualifications and Skills:

• Degree in Computer/Electrical/Electronic Engineering; Fresh graduates are welcome.
• Test environment will be similar to datacenters with emphasis on Window Servers and Linux.
• Programing knowledge on Python or C++ is an added advantage
• Experience with OS installation, assembly and debug of laptop/desktop systems would be an advantage

**Interested candidates, kindly email updated resume to [email protected] with Subject of "Test Engineer", thank you.

Strong experience in designing test cases using cucumber BDD format.

Strong experience on Web automation tools (Selenium)

Should be well versed in Automation (Selenium with Java), Framework development or maintenance.

Should be an expert in using Selenium – using Cucumber and POM Design Pattern.

Experience in programming language – Java.

Experience in Agile Methodologies and tools – JIRA, Confluence and Bitbucket

Willing to do manual testing on need basis.

Experience in all the phases of software testing lifecycle (STLC).

Provide technical leadership using relevant Automation experience and knowledge.

Devise innovative approaches to complex problems through adaptations and modifications of standard automation technical principles.

Lead technical root cause analysis, incident investigations, and solving problems on process control issues

Collaborating with QA Analysts and Software Developers to develop solutions.

Proficiency in programming languages such as Java, Python, C# etc.

Excellent mathematical and problem-solving skills.

Highly accurate and detail-oriented.

Having knowledge of Maven, Cucumber, Jenkins, etc. will be an advantage

Good to have:

Knowledge on API testing using Java and Rest Assured

Knowledge on the CI/CD

Knowledge in Banking domain – Retail and Corporate banking ( good to have )

Production Test Manager

(Semiconductor Device)

• Working Location: Tai Seng
• Working Days: 5 days (office hours)
• Salary Range: S$ 10,000 – 12,000

Job Requirement:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Job Requirement:

• Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Production Test Manager

(Semiconductor Device)

• Working Location: Tai Seng
• Working Days: 5 days (office hours)
• Salary Range: S$ 10,000 – 12,000

Job Requirement:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Job Requirement:

• Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

The Opportunity

• Our client, a Global MNC in the Semiconductor industry
• Seeking for Manufacturing Technicians x 10
• 5 days work shift, 8.5 hours
• Nearest MRT: Upper Changi
• Company Transport provided

The Talent

• NITEC or Higher NITEC or Diploma in Electrical, Electronics, Mechanical, Mechatronic, Microelectronics or any Engineering related studies
• Experience in Assembly, Build, Test, Preventive Maintenance
• Candidates with or without experience are welcome to apply!

The Job

• Working in the Production Centre and Cleanroom environment
• Responsible for maintenance and troubleshooting of the Tools and Equipment
• Handling testing and assembled equipment
• In-charge of the set-up and calibration of the equipment/machine/tool
• Understanding electrical/mechanical diagrams and drawings
• Perform QA/QC checks duties

Next Step:

• Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package.
• Simply click on 'Apply here' to drop your resume or email to [email protected]
• All shortlisted candidates will be contacted.

Edmond Lee
Direct Line: 8206 8857
EA License No: 91C2918
Personnel Registration Number: R23114813

Production Test Manager

(Semiconductor Device)

• Working Location: Tai Seng
• Working Days: 5 days (office hours)
• Salary Range: S$ 10,000 – 12,000

Job Requirement:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Job Requirement:

• Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

The Opportunity

• Adecco is partnering with a leading bank to look for a Test Analysts
• Focus: Responsible for end to end execution of the overall test strategy developed collectively with the product owner from user story acceptance criteria, JBehave writing, execution of testing and defects management to live verification support.
• Starts off as a 6 months contract
• Location: East

The Talent

• Minimum 1 years’ experience in web and mobile application testing in the banking industry isrequired
• Strong analytic skills to process complex requirement to come up with end to end scenarios and test cases
• Familiar with Agile and waterfall methodology, and understand the life cycle of testing in both automated and manual testing
• Have experience in running or being part of an agile project team in banking industry and have had hands on experience on JBehave
• Understanding Java and VB Scripting will be an advantage, for automation QA role hands on usual of selenium or Appium is a must for consideration
• Experience with Quality assurance processes and JIRA is a must
• Good stakeholder engagement skills with strong verbal and written communication is required as will need to collaborate closely across multiple teams during project execution
• Good team player with strong organizational skills and can work independently with minimum guidance

The Job

• Design, develop, execute, and maintain test scenarios and detailed end to end test cases for the assigned projects relating to the digital platform’s user acceptance testing.
• Able to write test cases in JBehave for agile projects.
• Expert in using testing tools such as JIRA, Confluence etc to execute and maintain project status.
• Knowledge of web and mobile application testing in banking domain, with good time management and keen eye for details to ensure quality and timely output
• Detect, report and track defects in the application tools and with various stakeholders to ensure proper closure of issues.
• Collaborate with all stakeholders proactive to complete job assigned from clarification to issue closure.
• Good with documentation as constant update to project changes will need to be updated timely

Next Step

• Kindly send your resume to [email protected] with the header 'Apply Test Analyst'

Responsibilities:

• Preparing the test environment, designing, and developing the test cases.
• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.
• Develop design documents and user manuals which would effectively describe and provide clear instructions on the test automation solution to the end users who include testers and stakeholders.
• Conducting test reviews with internal and external stakeholders and Perform root cause analysis for production and user acceptance defects, address test gaps to ensure test efficiency.

Requirements:

• Degree or equivalent qualification in Information Technology or Engineering
• 3+ years’ experience in Test Automation for devices (UI/embedded) or back-office systems, covering the full system development lifecycle.
• Experience with Micro-payments/Automatic Fare Collection systems (Smart Cards) and various test phases (System Integration, User Acceptance, Performance Testing) is a plus.
• Software testing certification preferred.

Apply, please kindly email your updated resume to [email protected].

Only shortlisted applicants will be notified.
APBA TG Human Resource Pte Ltd (14C7275) || Akshya R (R24122440)

Role: Test Manager

Job Level: More than 8 years of relevant experience (L4)

Duration: 12 Months

Key responsibilities:

• Overall accountable and responsible for delivery of testing services across the Payments, Real-time Data, Online API (PROS) Program
• Manage and oversee the day-to-day delivery of test services by Bank appointed vendors in the conduct of testing
• Works with the testing service providers and other UOB stakeholders to review, provide feedback and sign off on the test strategy, test plans and other test service providers’ artefacts for the testing service delivery
• Coordinates with the Test Governance team to ensure adoption of testing methods, standards and tools, and to coordinate any health checks or audits
• Ensures that any changes to the scope of services are communicated to the respective test service providers and the impact is factored in to the plan
• Engages with various UOB stakeholders (including but not limited to, application, security, infrastructure, business), testing service providers to ensure testing services meet the banks’ objectives and demand
• Act as the first point of escalation for any issues raised by UOB stakeholders, testing service providers
• Quantify, manage, track and report test related statuses, SLA and KPIs, and ensure that defined testing transformation SLA and KPI targets are met for the portfolio accountable
• Drive and collaborate with all UOB stakeholders and test service providers to plan all testing related deliveries for the portfolio accountable
• Participate and contribute in forums, as required, to drive testing transformation and innovation
• Works closely with the Test Engineering Lead to provide inputs around domain specific test engineering requirements and ensure that they are met
• Establishes and maintains effective working relationships with the Vendor Test Managers/Test Leads for the respective domains
• Engages stakeholder communities to get their feedback on testing service delivery and identify improvement opportunities to be fed back to the Test CoE team

Key skills required:

• Payments processing

• Cross border transaction processing

• Vendor management

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Job description

• Perform Design, Engineering, Project Management and Construction Management.
• Review project specifications and technical clarifications.
• Prepare method statements and check drawing discrepancies.
• Carry out project planning, design, material requisition, cost control, project supervision and documentation.
• Supervise the project work and coordinate with the client’s representatives, consultants, and subcontractors on technical matters.
• Coordinate with Architectural, Structural, Mechanical and Electrical staff members to resolve problems and issues.
• Assist in tender, progress claim, VO issuance and document control etc.
• Coordinate and support the design team to effectively deliver design deliverables which have been reviewed for procurement and build-ability.
• Carry out works scheduling, materials requisition and cost control responsibilities and liaise with clients, consultants, subcontractors and other relevant governmental authorities to ensure full compliance.
• Identify requirements for project, installation and commissioning personnel required for the delivery team and manage those resources assigned.
• Implement the processes and procedures for the control of subcontracts, installation, commissioning and take-over to meet the minimum requirements of the project.
• Responsible for quality aspects of works, site operation safety and material/plants utilization.

Job requirement

• Diploma or Degree in Mechanical or Electrical Engineering or any related discipline.
• Possess good interpersonal and communication skills.
• Proficient in MS Office suite, AutoCAD and related industrial software applications.
• Good analytical and problem-solving skills

Job description

• Perform Design, Engineering, Project Management and Construction Management.
• Review project specifications and technical clarifications.
• Prepare method statements and check drawing discrepancies.
• Carry out project planning, design, material requisition, cost control, project supervision and documentation.
• Supervise the project work and coordinate with the client’s representatives, consultants, and subcontractors on technical matters.
• Coordinate with Architectural, Structural, Mechanical and Electrical staff members to resolve problems and issues.
• Assist in tender, progress claim, VO issuance and document control etc.
• Coordinate and support the design team to effectively deliver design deliverables which have been reviewed for procurement and build-ability.
• Carry out works scheduling, materials requisition and cost control responsibilities and liaise with clients, consultants, subcontractors and other relevant governmental authorities to ensure full compliance.
• Identify requirements for project, installation and commissioning personnel required for the delivery team and manage those resources assigned.
• Implement the processes and procedures for the control of subcontracts, installation, commissioning and take-over to meet the minimum requirements of the project.
• Responsible for quality aspects of works, site operation safety and material/plants utilization.

Job requirement

• Diploma or Degree in Mechanical or Electrical Engineering or any related discipline.
• Possess good interpersonal and communication skills.
• Proficient in MS Office suite, AutoCAD and related industrial software applications.
• Good analytical and problem-solving skills

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Our esteemed client, an established MNC, is searching for a QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: 5-day work week
• Working Hours: 8:15 am to 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

· 5 days’ work week

· Central area near MRT

· Reputable and stable organization

Job Responsibilities:

· Provide pre-sales and post-sales technical support to customers and internal sales team, handling customer NDA and sample request

· Collect customers’ feedback and provide recommendation to customer for design requirements, product enhancements and capture new product opportunities

· Responsible for identifying and clarifying any technical issues related to new or existing products, and clearly communicate findings to the respective business unit

· Hands-on technical support to customers, documenting problems, and suggesting solutions

· Report design, reliability and functional problems to the appropriate groups within company & associate groups and work to solve problems

Requirements:

· Degree in Engineering (Electronics) or equivalent

· 5 years of technical customer support experience in semiconductor industry

· Field experience or hands-on practice or knowledge of multi-disciplinary system design and development

· Knowledge of Smart Card, RFID and microcontroller products; knowledge of physical access control and the security industry is desirable

· Experience with or knowledge of one or more of: CCD, CMOS image sensors, image capture, video standards, image processing

We would like to invite interested applicants to apply.

Thomas Tan

Registration No: 12C6253

License No: R2094900

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

Responsibilities

• To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples
• To liaise and work with relevant authorities, sub-contractors or clients on shop drawings, materials and samples
• Review and align electrical design drawings to ensure compliance with design specifications and guidelines
• Knowledge in M&E and able to identify discrepancies between M&E, structural, ID, architectural and client provisions
• Manage and execute project as per the deadline
• Attend meeting with contractors to address issues and update progress
• Study and review drawings, specifications for compliance
• Allocate work and ensure jobs are correctly and properly achieved within standards and SOP
• Submit Variation Works costing, taking BQ and understand contract specifications

Requirements:

• Bachelor’s degree or Diploma in Electrical Engineering or related disciplines
• At least 5 to 8 years of relevant experience as QS
• Good knowledge of M&E specifications & requirements
• Able to take BQ, submit Variation Works, understand contract requirements
• Candidate with more than 8 years of relevant experience will be considered for Senior position

Job Description & Requirements

Roles & Responsibilities

Responsibilities:

• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programme.
• Liaise with Professional Engineer on the Temporary works.
• Liaise with consultants for technical issues and coordinate the site activities with subcontractors.
• Handing of technical and engineering problems.
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time.
• Prepare report and method statement whenever necessary.
• Manage and control workers and monitor their work closely to keep site safer and neat.
• Supervise ongoing site activities closely.
• Other ad-hoc assigned by the Company.
• Good attitude and relevant working experience.

Requirements:

• Recognised Certificate in the relevant field subject.
• Min. 3yrs experience in the construction site.
• Independent with good communication skill.
• Good organizational and planning skills.
• Effective communication and coordination skills and team work.
• Able to work independently and in a team.
• Bilingual in English & Mandarin in order to communicate with Chinese speaking counterparts.

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Technical Sales Manager, Test & Measurement (Box & Systems Business)

About the Role:

As an Account Manager, you'll be responsible for driving sales of cutting-edge Test & Measurement solutions. You'll work closely with key customers in the aerospace, satellite industries.

Key Responsibilities:

• Customer Relationship Management: Build and maintain strong relationships with key accounts.
• Sales Strategy: Develop and implement effective sales strategies to achieve sales targets.
• Technical Expertise: Demonstrate a deep understanding of product portfolio – Box & Systems Business.
• Market Knowledge: Stay up-to-date with industry trends and customer needs.
• Business Development: Identify new business opportunities and expand our market reach.
• Customer Support: Provide excellent customer support, including technical assistance and troubleshooting.

Qualifications:

• Bachelor's degree in Electrical/Electronics Engineering, Telecommunications, or a related field
• 3-5 years of experience in sales or business development in the Test & Measurement industry
• Strong technical skills & background in RF testing, Radar Technologies & Satcom related testing

Please forward resume to [email protected]

Objectives of this Role:
1. Ensure the highest quality of our operations system by developing and executing tests to detect and report any errors in the product.
2. Develop suitable testing plans and frameworks that align with our customers' needs.
3. Coordinate with various functions and teams to incorporate necessary product changes.

Responsibilities:
1. The role involves writing test cases, preparing and creating test data, executing and retesting test cases.
2. Able to leveraging on inhouse GenAI for test case creation and enrichment
3. Ensure test runs and results are completed within the given time frame.
4. Develop and execute test plans to validate software functionality against requirements and specifications.
5. Identify, report, and track software defects and issues.
6. Perform functional, performance, security, and regression testing of software products.
7. Report test results and defects to the development team and other stakeholders, and work on their resolution.
8. Provide suggestions and feedback to improve the quality of the software development process across teams.
9. Stay updated with the latest testing tools, techniques, and methodologies.
10. You will work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations

Required Skills and Qualifications:
1. Degree or diploma in computer science, engineering, or similar technical certifications.
2. At least 1-3 years of experience in testing, quality assurance, or similar roles.
3. Excellent problem-solving skills, an analytical mindset, and strong communication skills.

Preferred Skills and Qualifications:
1. Proficiency in testing tools such as JIRA, Selenium, Appium, and other testing frameworks.
2. Certifications such as ISTQB (International Software Testing Qualifications Board) and CSTE (Certified Software Tester).

EA License No. 01C4394 • RCB No. 200007268E • Lim Jia Jie EA Registration No. R22108969

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tac and the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

Your responsibilities include:

• Conceptualize M&E designs and execute the project with the detailed designs.
• Manage and engage client/consultant/ contractors and local authorities to drive project execution, submission to authorities and overall on-site construction supervision.

What you will need:

· A recognized university degree Mechanical or Electrical Engineering or Building Services.

· Minimum 2 years’ of relevant experience in design and implementation of building services.

· Strong team-working, communication and interpersonal skills. Able to build good working relationships with client and key stakeholders.

· Open to opportunities to be trained on a wide range of technical and management topics.

Able to design the electrical system in the construction projects.

Must ensure compliance in the electrical systems.

Able to do coordinate installation.

Able to do maintenance and test activities.

Able to solve the issues in the electrical projects in the construction projects.

Able to lead the team of workers and site supervisors.

Our esteemed client, an established MNC, is searching for a QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: 5-day work week
• Working Hours: 8:15 am to 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

Responsibilities:

• Assist Project Manager in daily site operation.

• Prepare Daily Report and submission.

• Prepare work Inspection Checklist and submission.

• Prepare materials request and arrange for delivery.

• Prepare request for fabrication.

• Receive and verify materials delivered and record GDN and DO.

• Update drawings and drawing register, receipt and issue of drawings.

• Ensure all documented records are properly filed.

• Organize the project site and other places of work so that all operations are carried out to the required standards with the minimum of risk to men, equipment and materials.

• Plan and maintain a tidy construction site.

• Arrange the delivery and stacking of material in such a manner as to avoid increasing the risks involved by double handling.

• Implement arrangements with sub-contractors and other contractors on the project site to avoid any confusion about areas of responsibility.

• Ensure that periodic tests, inspections and maintenance work are being carried out.

• Ensure that all repair and maintenance work carried out on the project site is done in a proper manner.

• Ensure that correct procedures and system of work are being developed and maintained.

• Attend promptly to all notified plant defects or bring to the attention of the relevant Foreman the need for Dangerous plant to be put out of service.

• Manage & Comply with Workplace Safety & Health for project execution.

Requirements:

• Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent

• Minimum 4 years of site experience in construction field is preferred.

• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner.