Civil Engineer (Project & Site coordination)

Civil constriction projects

Primary Role

Responsible for advanced Planning, designing, integrating, installation, rigging and lifting equipment, including management of contractors and vendors

Responsible for supervising and assessing the set-up of all project components, manage all aspects of an engineering project, prepare schedules, communicate with clients, project progress.

Key Activities

1. Oversee and regularly review engineering processes and resources to maximize efficiency and productivity
2. Develop plans for new engineering initiatives, including investigating new technologies and developing plans for new project implementations
3. Required to be analytical and precise, to explore alternative solutions and analyze feasibility of plans
4. Work independently and to coordinate closely with internal and external stakeholders to implement new processes and technology, to offer innovative solutions to customers
5. Design, communicate and implement an operational plan, create and maintain cost estimates for projects and programs
6. Identify, develop, and gather the resources necessary to complete the project. This may include preparing engineering standards, designs, and work specifications
7. Developing project schedules, budgets, and forecasts; and selecting materials, equipment, and external contractors
8. Liaise with other operational areas in the organization (engineering, design, drafting, technical) to secure specialize resources and contributions for the project
9. Conduct project meetings and prepare regular reports to communicate the status of the project within and beyond the project team
10. Set priorities, allocate tasks, and to meet project targets and milestones, ensure smooth authority submission
11. Solve technical issues such as drawing discrepancies, site condition changes, verify plans, drawings and quantities for accuracy, raise RFI when necessary
12. Ensure accuracy of setting out, levelling and site surveying and all materials used and work performed are as per specifications
13. Liaising with project consultants, architect, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project
14. Support Project manager to liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws
15. Liaising with clients and their representatives (architects, engineers, and surveyors), including attending regular meetings to keep them informed of progress
16. Overseeing quality control and assist safety department to achieve health and safety target on site
17. Preparing method statement, daily weekly and monthly report
18. Ensuring all site inspection and record as per client/developer requirement
19. Ensuring all testing and quantity inspection are carried out as per contract requirement
20. Analyze and resolve engineering problems and demonstrate effective skills in oral and written communication

Requirements

Min 3 years experiences in civil, infrastructure projects

Bachelor degree in Civil Engineering, PE board recognized

Roles & Responsibilities:

· Responsible for development of high-performance materials (PPS/ PEI/ PEEK/ PES/ PPA/ PA, etc.) and cooperating with the R&D department team to implement new formulas and new product development.

• Working from blueprint to determine the raw materials needed to produce the products.
• Liaise with sales division to determine customer requirements. Material applications mainly include electronics, electrical, chemical and other fields.
• Responsible for the drafting and revision of relevant product project technical data, patents, science and technology project approval and other documents.
• Tracks the progress of goods as they are being manufactured to ensure they remain on schedule.
• Work to get production problems resolved and involve others in problem solving.

Requirements:

· Masters in Chemical engineering/ material engineering/ Electronic engineering is required.

· Knowledge in polymers applied to electrics & electronics an added advantage.

Key Skills and Competencies

• Excellent Communication Skills
• Project Management Skills
• Technical Knowledge
• Judging/Problem Solving
• Quality/Attention to Details
• Teamwork/Collaboration

• To support the construction team for M&E engineering works.
• Oversee and ensure works are carried out in accordance with the approved drawings, materials and method statements.
• Conduct inspections for all M&E systems.
• Ensure all M&E and related works carried out by contractor are planned and executed to the requirements of the project.
• Liaise with consultants, clients and subcontractors on M&E works progress, coordination and decisions.
• To involve, support and assist other aspects of operational needs when assigned.

Job Requirements:

• Degree in Mechanical & Electrical Engineering.
• Min 5 years M&E building service experience.
• Knowledge of AutoCAD added advantage.

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: North

Job Description:

• Design, test, troubleshoot, and commission company products, including jigs, fixtures, and both semi-automatic and fully automatic custom machines.
• Participate in customer meetings to discuss project requirements and proposals for new initiatives.
• Conduct research and develop innovative ideas to improve the company’s performance and competitiveness in industrial automation.
• Assist in or manage the procurement of required materials and equipment to support the execution of these tasks.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

Our client is from Medical industry. They are looking for a Software Engineer to assist their team for the next phase of their business. They are located in Central - easily assessable.

Duties Software QA Engineer:

• Verify user applications and server-side components to meet requirements and specifications discreetly.
• Execute Unit, Regression, Integration, Performance, and System Tests confidentially.
• Collaborate with developers to resolve issues arising from test procedures and results while maintaining confidentiality.
• Take ownership of assigned modules and projects discreetly.
• Manage defect tracking and implement solutions confidentially.
• Update tasks in OpenProject privately.
• Maintain and backup databases as needed, ensuring data security discreetly.
• Participate in software design reviews and create confidential test reports for releases.
• Review software documentation for technical accuracy while maintaining confidentiality.

Requirements:

• Diploma/ Degree in IT or Computer Science.
• Min 3 years of working experience in relevant industry
• Experience in SQL, JENKINS and TestComplete

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

The Web Browsers Services Support Engineer will support web browser technologies across Windows 10 and 11 operating systems, ensuring seamless functionality and providing expertise in incident and service management.

Responsibilities:

• Act as the primary point of contact in Asia for tier-3 browser-related support, including incidents and service requests.
• Collaborate with Lines of Business, Program Managers, and Application Owners to ensure compatibility and functionality of web applications on preferred browsers.
• Maintain and update baseline settings documentation for all browsers across platforms.
• Configure and manage Intune CSP and related policies.
• Handle support tickets in the ServiceNow platform for incidents, service requests, changes, and problems.
• Develop and update Knowledge Base articles related to web browsers.
• Work with the Packaging Team for deploying browser front-end technologies.
• Troubleshoot complex browser issues and liaise with vendors for resolution.

Technical Requirements:

• Solid understanding of web browser technologies (e.g., MS Edge, Chrome, Safari) on Windows, MacOS, and Linux.
• Proficiency in Microsoft Endpoint Manager (MEM), especially Intune, with knowledge of the Autopilot process.
• Understanding of MEM Windows applications fundamentals and Microsoft registry.
• Knowledge of Microsoft Entra and Azure Active Directory fundamentals.
• Intermediate-level scripting skills in Microsoft PowerShell. Expertise in MEM, Intune policy, GPO configuration, and CSP integration with third-party browsers.

To apply, simply click the "Apply" button or send your updated profile to [email protected]

EA Licence No.:18S9405 / EA Reg. No.:R1330864

Percept Solutions is expanding and actively seeking talented individuals. We encourage applicants to follow Percept Solutions on LinkedIn at https://www.linkedin.com/company/percept-solutions/to stay informed about new opportunities and events.

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: North-East

Job Description:

• Design and implement software solutions for automated semiconductor process equipment.
• Enhance equipment performance by implementing Continuous Improvement Processes (CIPs) and other development initiatives.
• Provide field support for upgrades and resolution of customer issues.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

• Installation and Maintenance of Electrical and Mechanical Systems: Install, maintain, and repair electrical and mechanical systems, including motors, generators, HVAC systems, and other complex equipment across construction projects.
• System Integration: Collaborate with engineers and other technicians to integrate electrical and mechanical systems, ensuring compatibility and proper functioning across all areas of the project.
• Troubleshooting and Fault Diagnosis: Identify and troubleshoot issues in both electrical and mechanical systems, using specialized tools to analyze and repair problems related to wiring, circuit boards, and mechanical components.
• Blueprint and Technical Drawing Interpretation: Read and interpret electrical and mechanical blueprints, technical drawings, and schematics to ensure proper system installation and repairs.
• Safety Standards Compliance: Ensure all work is performed in compliance with safety regulations, electrical codes, and mechanical standards to prevent accidents and ensure a safe working environment.
• Performance Testing and Calibration: Conduct performance testing and calibration of electrical and mechanical systems to ensure they meet the required specifications and function efficiently.
• Collaboration with Project Teams: Work closely with engineers, architects, and other construction teams to ensure the proper design, installation, and integration of electrical and mechanical systems.
• Night Shift and After-Hours Support: Be available for night shifts or after-hours work to perform emergency repairs, conduct routine system checks, or ensure that critical systems are operational when needed.
• Preventative Maintenance: Perform regular maintenance on mechanical and electrical systems to prevent breakdowns and extend the life of equipment, following scheduled maintenance programs.
• Documentation and Reporting: Maintain detailed records of all maintenance, repairs, and installations carried out. Report any issues or progress to the management team, ensuring accurate documentation for future reference.

Our client is one of Singapore’s leading A1 civil contracting firm which has a strong construction portfolio. They have just been awarded a new $600 million building project and is seeking for a competent a Senior Electrical Engineer to manage the project.

Job Description:

• Manage the electrical system installation, testing & commissioning as well as the mechanical system.
• Oversees and monitors overall day to day operations of M&E department
• Oversees the preparation and interpretation of M&E shop drawings and ensuring it is adhered according to the specifications and engineering calculations.
• Conducting site inspection, quality checks and method statement
• Identifying variation works and submit detailed cost implications to Contracts Manager
• Supervise and control sub-contractors to carry out their works in accordance with the M&E drawings and specifications
• Analyze and interpretation of reports on loading, labour, productivity, quality, materials and performance.
• Review monthly reports on M&E activities and report to management.
• Identify drawing discrepancies or flaws and constantly track construction progress and schedule on-site supervision

Requirements:

• Min Bachelor’s Degree in Electrical Engineering recognized by PE Board Singapore
• Min 5 years of project management experience in main-contractor
• Demonstrates strong technical competence and excellent time management skills

For a confidential discussion please apply or send your resume to [email protected]

To view more roles within; construction, real estate, engineering, architecture or renewables, please visit our website: www.archerrecruitment.com, contact one of our specialist consultants http://archerrecruitment.com/about/our-people/ and/or 'follow' our LinkedIn page for regular industry updates.

We appreciate every application, however, due to a high volume of applicants, only shortlisted candidates will be contacted.

EA Licence No: 17C8952 | R2197282

Job Description

 Involvement in the entire software development life cycle including application

development, implementation, testing, maintenance and documentation

 Responsible for the development, installation, configuration and customization of Enterprise

products and/or software services and cloud platforms

 Designing and implementing scalable web services, applications and APIs

 Perform troubleshooting & debugging software defects

 Writing, testing clean and secure code to ensure responsiveness and efficiency

 Staying abreast of latest technologies and work with R&D team on conceptualized design of

prototype and Proof-Of-Concept (POC) into eventual solution for end user’s business cases

Education / Experience

 Bachelor’s degree in Computer Science, Computer Engineering or related technical discipline

 1 – 5 years of relevant working experience

Requirements

 Proficient in one or more back-end programming languages / frameworks such as .NET/.NET

Core, Java Spring Boot or Python

 Proficient in JavaScript and one or more front-end frameworks such as React or Angular

 Proficient in Git

 Knowledge and experience in Relational Databases (eg. MS SQL, Oracle, PostgreSQL)

 Good understanding of Agile/Waterfall software delivery methodology

 Able to work independently and as a team

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Project Engineer

Salary ≥ $3.5K-5.5K

Working days: 800am to 60pm, 5.5 Days a Week (Full 6 days a week for the first 6 months employment)

Location: Around Singapore

Requirements:

• Degree in Civil Engineering or equivalent
• Min 2-3 years of experience in building-related projects

Responsibilities:

• Manage the transmission of documents and drawings to clients and subcontractors, ensuring that updated drawings are issued.
• Prepare method of statement and work procedures.
• Ensure work is executed according to the method statements.
• Conduct weekly or monthly meetings with subcontractors to update project progress.
• Coordinate construction activities to comply with QOSHE (Quality, Occupational Safety, Health, and Environment) requirements.
• Conduct project risk impact assessments.
• Review construction drawings for accuracy.
• Manage the procurement of resources, and monitor and control material usage on-site to prevent unnecessary wastage or incorrect use.
• Assist the Project Manager in coordinating with consultants on change orders.
• Organize labor, equipment, and materials for daily site activities.
• Perform material receiving inspections and maintain material records, ensuring all delivery orders are returned to HQ for documentation.
• Prepare daily reports, and perform and maintain inspection records.
• Any other duties assigned

Job Description

• Perform process/ mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, equipment specification/data sheet, etc
• Provide process / mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Perform technical review of equipment/system vendors’ proposal and submission during procurement detailed design and installation stages
• Prepare the process / mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the equipment suppliers / subcontractors to meet the project schedule for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor degree in chemical/Environmental/Mechanical Engineering
• Minimum 4 Years’ experience in process/mechanical design of water/wastewater treatment plant (design experience in the flue gas desulphurization (FGD) wastewater system/plant (or similar system/plant) would be advantageous); For senior position, candidate must have at least 8 years of relevant experience
• Familiar with relevant standard and Singapore code of practice
• Possess strong inter-personal and communication skills
• Must have advanced computer literacy in commonly used software applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Prepare and review Instrumentation, Control and Automation (ICA) Works specifications.
• Assist the ICA Lead and manage the engineering design works for the Control System Architecture, Data Communication Networks, Functional Design Specification (FDS), Process Control Narrative (PCN) and Process Instrumentation Diagrams (P&IDs), Programmable Logic Controller / Distributed Control System (PLC/DCS) and Supervisory Control and Data Acquisition (SCADA) and any other ICA Works as required.
• Handle equipment package and procurement including technical specifications preparation, technical clarification, technical bid analysis, etc.
• Collaboration with multiple stakeholders including internal teams of different trades, clients, consultants, other packages contractors, sub-contractors and vendors to ensure success of the project.
• Prepare, review and liaison with subcontractor(s) in the design and submission, ensuring all project specifications and design standards are met.
• Work with cross function project team to support project activities, i.e. schedule, process, progress claims, work progress, etc.
• Manage and supervise the project execution, site installation, inspection, testing and commissioning, plant proving related to Instrumentation, Control and automation system and interface works with other disciplines and all stakeholders.
• Attend to clients’ comments and ensure clients’ approval & acceptance to all ICA related design, installation and Testing & Commissioning Works.
• Resolve the site technical related matters.

Design, Engineering, FAT, Installation, Testing and Commissioning of:-

• System Control PLC/DCS and SCADA.
• Input / Output list
• Data Communication Network and ICA Panels.
• Instruments.
• FAT and SAT of Interfacing Panels, Instruments, Pumps, etc.
• Cable Support System.
• Cabling & Termination Works.

Requirements

• Degree in Electrical & Electronic Engineering / Instrumentation & Control Engineering / Advanced Diploma in Process Control and Instrumentation.
• Experience in Selection, Installation, Testing and Commissioning of the Instrumentation.
• Experience in ICA engineering Works, preferably in water/wastewater projectswill be an added advantage.
• Experience in Programming of PLC/DCS and SCADA.
• Experience in Project Execution, Supervising and Coordination with subcontractors, consultant and Client.
• Good knowledge in Microstation/Autocad software.
• Good technical understanding and experience in water, wastewater and environmental engineering works.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.
• Minimum 5 years relevant experience in engineering, installation, testing and commissioning of ICA Works.
• Able to work in the Tuas South area, in Singapore.

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Responsibilities:

• Demonstrate proficient knowledge in cabling installation.
• Independently deploy resources and manage site operations.
• Respond promptly to service calls to resolve faults.
• Ensure timely delivery and completion of service and maintenance tasks.
• Provide basic IT networking assistance and support.

Requirements:

• Possess a valid Class 3 Driving License.
• Hands-on and eager to learn new skills.
• Previous experience in IT networking and cabling installations preferred.

Interested candidates who wish to apply for the advertised position, please click on the apply button

EA License No: 96C4864

Reg. No.: R2094940

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Scope:

• Provide technical support and troubleshooting for mechanical products
• Assist in product integration and customer site applications
• Collaborate with sales teams to deliver tailored solutionsX`
• Liaise with R&D to provide customer feedback and insights
• Prepare technical documentation and user training materials
• Conduct product demonstrations and training for clients
• Ensure optimal product performance and customer satisfaction
• Participate in product testing and validation
• Stay updated on industry trends and new technologies

Requirements:

• ITE or Diploma in Mechanical Engineering (or equivalent)
• Strong hands-on skills with small mechanical parts
• Familiarity with AutoCAD 2000, R14, and SolidWorks is advantageous

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

For Reserve Power Industrial Products

Job Description

- Identify, Research and Qualify new business prospects

- Prospecting potential customers and follow up by sales visits

- Search and attend to private tender invitation as well as public tender

- Perform Full Sales Cycle (e.g. Prepare sales/price proposal, follow up, negotiate, closing of orders and payment collection)

- Provide pre-sales technical assistance and product specification

- Manage and maintain good relationship with assigned customers

- Provide weekly project and sales forecast updates to management

- Attend site survey and/or meetings whenever is required

- Work with project/technical team on pre and post sales support

Requirements

- Dip. in Electrical / Power Electronics Engineering or Equivalent

- Min. 4~5 years of sales experience in M&E, Renewable Energy or similar industry

Other Information

- Remuneration package: Basic Salary + Sales Commissions/Incentives + Transport & Phone Reimbursement + Medical/Dental Reimbursement

- Location: Kallang Central

- Flexi-work arrangements

Please include the following in your C.V

- Personal particulars

- Education background

- Work experiences in point forms

- Current and Expected salary

- Date of availability / Notice Period

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: IT/Telecommunications
• Position Title: Project Engineer
• Working Location: Macpherson
• Working Hours: 5 working days (Mon to Fri 8.30AM – 5.30PM)
• Salary Package: Basic Salary up to $3,500 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Responsible for managing the overall direction, coordination, implementation, execution, control and completion of structured cabling projects
• Monitor the day-to-day activities in the field, managing the flow of information, and reporting and tracking issues arising from progress, quality and safety
• Assist in completing the handover plan, ensuring documentation is completed and expectations are met on time and with quality
• Identify issues proactively and work with the team to resolve effectively
• Maintain and develop strong relationship with customers with direct interaction with focus on improving customers’ perception of service, quality, on time delivery, responsiveness, and problem solving.
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Diploma/Degree in Engineering or any relevant discipline
• Has 1 year of experience with fiber optics or relevant products in the industry
• Prior experience with Structured Cabling/ELV is an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71056 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Responsibilities:

·Plan, execute, monitor and assist in the installation and ongoing support and maintenance of all hardware, software and networks in project delivery

·Conduct root cause analysis & implement pro-active measures

·Responsible for supporting operational systems satisfying contractual Service Level Agreement

·Perform and manage routine preventive maintenance and operational activities promptly and effectively

·Perform troubleshooting and fault rectification

·Provide up-to-date project documentation and reports

·Diagnose and rectify technical issues

·Perform standby duties if required

Job Requirements:

·Experience in Windows server OS, Unix/Linux OS & virtualization environment (VMware, HyperV etc.)

·Strong troubleshooting skills and analytical mind with problem-solving aptitude

· Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment

·Pro-active, dynamic and with good analytical/conceptual thinking

·Able to work independently as well as in a team and good interpersonal skills

·Good Working knowledge with VPN, firewall appliances would be an advantage

·Good working knowledge with routers, switches would be an advantage

·Good working knowledge in hardware like servers, storage area networks (SAN), network-attached storage (NAS) devices

•Experience in hardening of OS, system and network equipment

•Experience in Patch Management

•Good Knowledge of IT Infra services like Active Directory, DHCP, DNS, Exchange/Mail Service, Database, Web or App Server etc.

You may submit your resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

(EA Reg No: 20C0312)

Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.

Job Scope:

• Design, develop, and test electrical systems and components
• Create electrical schematics, layouts, and wiring diagrams
• Ensure compliance with standards, codes, and safety regulations
• Select components and perform system simulations
• Troubleshoot and resolve electrical system issues
• Collaborate with cross-functional teams for integrated solutions
• Oversee installation, testing, and commissioning
• Provide technical support to production and maintenance teams
• Prepare and maintain project documentation and reports
• Implement energy-efficient and sustainable electrical solutions
• Research and apply new technologies to enhance system performance

Requirements

• Diploma/Degree in Electrical Engineering with 2-3 years of experience
• Experience in designing and developing customized automation machines
• Proficient in writing PLC programs (e.g., Omron, Allen Bradley, Siemens, Keyence)
• Familiar with PC-based programming (Visual Basic, C++) for machine controls
• Hands-on experience in guiding technicians with schematics and electrical layouts
• Occasional travel required

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Role

• Install, configure, and administer VMware ESX/ESXi servers (5.x, 6.x, and 7.x).

• Manage and maintain vCenter Servers (4.x, 5.x, 6.x, and 7.x).

• Configure, administer, and troubleshoot VMware vSAN 6.7 and newer versions.

• Perform capacity planning, resource allocation, and optimization for VMware environments.

• Monitor and resolve performance issues within VMware infrastructures.

• Perform firmware and software upgrades on VMware ESX/ESXi hosts.

• Install, configure, and maintain Windows Server operating systems (2008, 2008 R2, 2012, 2012 R2, 2016, and 2019).

• Manage Active Directory, DNS, DHCP, Group Policy, and other core Windows Server functionalities.

• Troubleshoot hardware and software issues in physical and virtualized Windows environments.

• Plan and execute patching, updates, and upgrades for Windows Servers.

• Implement best practices for data backup, restoration, and disaster recovery planning in virtualized environments.

• Work closely with security teams to ensure compliance with corporate security policies.

• Maintain documentation for infrastructure designs, configurations, and procedures.

• Assist with IT infrastructure projects and provide technical support for escalated issues.

• Monitor system health and ensure high availability of all services.

Skills and Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or related field (or equivalent experience).

• 5+ years of experience in VMware and Windows Server administration.

• Proficiency in VMware tools, including vSphere Client and VMware vSAN.

• Strong knowledge of Windows Server installation, configuration, and administration.

• Experience with virtual network configuration and troubleshooting.

• Familiarity with storage technologies and SAN/NAS integration.

• Excellent problem-solving and communication skills.

• Certification in VMware (e.g., VCP-DCV) or Windows Server (e.g., MCSA, MCSE).

• Experience with scripting and automation (PowerShell, Bash, etc.).

• Exposure to hybrid cloud environments and integrations with VMware on AWS/Azure.

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)