Job Description:

1. Lead the team in designing, simulating, and documenting analog circuits and chip designs.

2. Oversee and optimize layout design and routing to enhance efficiency and quality.

3. Support product testing, debugging, and application development.

4. Mentor junior analog designers and prepare comprehensive design documentation.

Job Requirements:

1. Master’s degree or higher in Microelectronics or Electronic Engineering with over 10 years of relevant experience.

2. Expertise in designing analog mixed-signal circuit blocks, including bandgap references, bias circuits, LDO regulators, amplifiers, comparators, switched capacitor circuits, ADCs, DACs, oscillators, filters, Tx/Rx equalizers, and circuits like de-emphasis, CTLE, DFE, and CDR architecture, as well as high-speed digital components (serializers, deserializers, counters, dividers, etc.).

3. Proficiency in high-speed interface protocols such as PCIe, USB, SATA, DDR, and LPDDR.

4. Advanced knowledge of analog mixed-signal design, with experience in high-speed serial and parallel circuits using cutting-edge processes (e.g., 3nm, FinFET, SOI, bulk CMOS).

5. Extensive hands-on experience with design tools and static timing analysis tools (e.g., Nanotime).

6. Strong problem-solving skills and a proven ability to deliver results within tight timelines.

Interested candidate may send your resume to [email protected]

Piping Design Engineer

• Working Days: 5 days’ work week
• Working Hours: 8:15 am–6 pm (Mon-Fri)
• Office Location: Joo Koon
• Salary Range: S$ 2,500 - 3,500

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

-Supervise and coordinate the activities of site contractors ;

· Monitor job progress and ensure that civil and structural contracted works meet all practical, and commercial, requirements of productivity, quality ,and contract target completions;

· Ensure all design work conforms to the codes and standards used by the client, or to agreed industry standards.

· Implement and oversee site projects assigned to ensure smooth project execution

· Manage internal and external contractors well to ensure the quality of work and scope of work is within specifications.

· Responsible for all inspection activities being carried out.

· Assist in planning, scheduling, and technical support to PM and/or resident engineer/technical officer.

. Assist LCDW and TCDW

.Assist InterNACHI CPI, mentor for home inspection

Responsibilities:

The successful candidate will be responsible for the design and development of one or more devices that are part of an integrated e-payment Fare Collection System. The successful candidate will also be involved in the software development lifecycle from definition of requirements to design and development, and testing.

The activities required to be performed shall include the following:

• Design and build advanced applications for ubuntu platform.
• Collaborate with cross-functional teams to define, design and implement new features.
• Unit-test code for robustness, including edge cases, usability, and reliability.
• Work on bug fixing and improving application performance.
• Preparation and submission of deliverables throughout the software development lifecycles such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the standard adopted by the Authority.
• Liaise with stakeholders on the requirement, design and testing issues.

Qualifications & Requirements:

• Tertiary qualification in Electrical/ Electronics/ Mechanical Engineering/ Computer Science or a relevant discipline
• At least 3 years in software development and system integration
• Experiences in C++ application development
• Knowledge or work experiences in the following areas is an added advantage
• Java application development
• Web application using HTML/HTML5, JavaScript and JavaScript Framework (i.e. AngularJS, ExtJS, JQuery, Bootstrap)
• Interfacing with database (i.e. MS SQL, Oracle, MySQL) using ODBC/JDBC and SQL
• Multi-tier software architecture design and implementation
• Object-oriented software design and UML modelling
• Virtualization using Containerisation (e.g. docker)
• Applications development and deployment into Commercial Cloud (e.g. AWS)
• Application development for Desktops / Workstations
• Web services in Commercial Cloud (e.g. AWS)
• AWS Lambda Functions using Python or JavaScript
• Single Sign-on solutions (e.g. OAuth, OpenID Connect, SAML)
• Secure communication (e.g. MQ, MQTT, SFTP, FTP-S)

Responsibilities:

The successful candidate will be responsible for the design and development of one or more devices that are part of an integrated e-payment Fare Collection System. The successful candidate will also be involved in the software development lifecycle from definition of requirements to design and development, and testing.

The activities required to be performed shall include the following:

• Design and build advanced applications for ubuntu platform.
• Collaborate with cross-functional teams to define, design and implement new features.
• Unit-test code for robustness, including edge cases, usability, and reliability.
• Work on bug fixing and improving application performance.
• Preparation and submission of deliverables throughout the software development lifecycles such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the standard adopted by the Authority.
• Liaise with stakeholders on the requirement, design and testing issues.

Qualifications & Requirements:

• Tertiary qualification in Electrical/ Electronics/ Mechanical Engineering/ Computer Science or a relevant discipline
• At least 3 years in software development and system integration
• Experiences in C++ application development
• Knowledge or work experiences in the following areas is an added advantage
• Java application development
• Web application using HTML/HTML5, JavaScript and JavaScript Framework (i.e. AngularJS, ExtJS, JQuery, Bootstrap)
• Interfacing with database (i.e. MS SQL, Oracle, MySQL) using ODBC/JDBC and SQL
• Multi-tier software architecture design and implementation
• Object-oriented software design and UML modelling
• Virtualization using Containerisation (e.g. docker)
• Applications development and deployment into Commercial Cloud (e.g. AWS)
• Application development for Desktops / Workstations
• Web services in Commercial Cloud (e.g. AWS)
• AWS Lambda Functions using Python or JavaScript
• Single Sign-on solutions (e.g. OAuth, OpenID Connect, SAML)
• Secure communication (e.g. MQ, MQTT, SFTP, FTP-S)

Job Description:

1. Contribute to defining product specifications, microarchitecture, and implementation for high-speed memory interfaces.

2. Perform RTL coding, LINT checks, and initial testing of designs.

3. Collaborate with the verification team for debugging in the lab.

4. Work closely with the software team and/or customers to troubleshoot, debug, and optimize system performance.

Job Requirements:

1. Bachelor’s degree in Communications, Electronic, or Computer Engineering;

2. 6 of experience in ASIC design, with a strong understanding of the ASIC development process.

3. Proficiency in Verilog HDL coding and EDA tools for synthesis and timing analysis.

4. Experience with high-speed interfaces (e.g., DDR, SerDes, PCIe) is a plus.

5. Strong problem-solving skills and the ability to deliver results within deadlines.

6. Excellent organizational and communication skills.

Interested candidate please send your resume to [email protected]

Description

• Design and optimization of mechanical components for HVAC systems
• Analysis of mechanical systems, including structural, fatigue, thermal and vibration
• Develop manufacturing drawings in accordance with applicable standards
• Construct and build developed systems
• Collaborate and interact with external vendors for component selection, manufacturing and system assembly
• Read, interpret and review technical drawings, schematics, and computer-generated reports
• Generate operating procedures and provide technical information
• Collaborate and analyze customer design proposals, specifications and requirement, and to evaluate and propose solutions

Requirements

• Bachelor’s degree in mechanical engineering or equivalent engineering degrees
• Diploma with good experience in mechanical design and system assembly will also be considered
• Good mechanical aptitude and knowledge
• Proficient in SolidWorks and modeling
• Excellent problem solving and project management skills
• Background in HVAC engineering is a plus
• Experience in product development especially in HVAC product development is a plus
• Technically sound coupled with experience in sourcing, negotiation and cost control
• Possess initiatives, logical thinking and good analytical abilities, and able to resolve issues from multiple perspectives.
• Passion for the job and a challenging spirit preferred.
• Strong communications and interpersonal skills

Service Engineer (Semiconductor)

5 days, 9am- 6pm, may need to support short term night work

Salary: $2700- $3800

Address: Woodlands

Job scope:

• Perform equipment on-site installation, diagnosing, troubleshooting, servicing, and repairing
• Perform equipment continuous improvement programmes, preventive maintenance, modifications and repairing works
• Serves as company contact point with customer on technical matters
• Attends to customers complaints and provides timely solutions
• Other ad hoc duties

Requirements:

• Diploma/ Degree in Mechanical/ Mechatronic Engineering or related discipline
• Experience in semiconductor industry is required
• Prior experience in cleanroom fabrication is a must

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Job Description:

• Perform global structural analysis with all major connection detail ULS/ALS.
• Perform global fatigue analysis with all major connection detail FLS.
• Perform complete structural analysis reports for all main structure foundation, support, lifting, sea fastening, load out, dry & wet tow up to classification society approval level.
• Able to perform steel beam design such as ULS bending, shear, bucking verification and SLS deflection verification using the beam section properties.
• Perform mesh load transfer for structural analysis.
• Perform structural design specification.
• Perform main scantling and steel weight calculation.
• Perform structural construction standard in detail engineering.
• Perform Collision analysis.
• Design and perform all kind of major structural connection detail and analysis.
• Coordinate with classification societies for design and analysis approvals.
• Design and drafting of all structural drawings such as hull lines plan, structural category plan, deck loading plan, full penetration welding plan, scantling drawings, major connection scantlings etc. (Optional)

Requirements:

• Academic qualification in Marine/Ocean Engineering or Civil Engineering
• Minimum 8 years of relevant working experience in the whole process of concept/basic design/detail engineering of semi-submersible substructure/floater design in Floating Offshore Wind Turbine (FOWT) or offshore rig industry.
• Proficient in software packages in SESAM Genie, SACS, Python and AutoCAD
• Good knowledge of all regulations such as DNV, ABS, BV, IEC etc.

Responsibilities:

The successful candidate will be responsible for the design and development of one or more devices that are part of an integrated e-payment Fare Collection System. The successful candidate will also be involved in the software development lifecycle from definition of requirements to design and development, and testing.

The activities required to be performed shall include the following:

• Design and build advanced applications for ubuntu platform.
• Collaborate with cross-functional teams to define, design and implement new features.
• Unit-test code for robustness, including edge cases, usability, and reliability.
• Work on bug fixing and improving application performance.
• Preparation and submission of deliverables throughout the software development lifecycles such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the standard adopted by the Authority.
• Liaise with stakeholders on the requirement, design and testing issues.

Qualifications & Requirements:

• Tertiary qualification in Electrical/ Electronics/ Mechanical Engineering/ Computer Science or a relevant discipline
• At least 3 years in software development and system integration
• Experiences in C++ application development
• Knowledge or work experiences in the following areas is an added advantage
• Java application development
• Web application using HTML/HTML5, JavaScript and JavaScript Framework (i.e. AngularJS, ExtJS, JQuery, Bootstrap)
• Interfacing with database (i.e. MS SQL, Oracle, MySQL) using ODBC/JDBC and SQL
• Multi-tier software architecture design and implementation
• Object-oriented software design and UML modelling
• Virtualization using Containerisation (e.g. docker)
• Applications development and deployment into Commercial Cloud (e.g. AWS)
• Application development for Desktops / Workstations
• Web services in Commercial Cloud (e.g. AWS)
• AWS Lambda Functions using Python or JavaScript
• Single Sign-on solutions (e.g. OAuth, OpenID Connect, SAML)
• Secure communication (e.g. MQ, MQTT, SFTP, FTP-S)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Plan, design and administer contract/project of mechanical and electrical engineering works for building service including Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Job Opening: Biomedical Engineers x 4 (Permanent Role)
Location: Hospital

Roles Available: Senior and Engineer levels (Open to candidates from vendors as well)

Key Responsibilities:

• Assist the HOD and manager in achieving service goals, KPIs, and departmental targets.
• Ensure safety and effectiveness of medical equipment by implementing programs that minimize disruptions.
• Manage vendor maintenance agreements for medical equipment.
• Prepare specifications for tenders, evaluate submissions, and provide technical recommendations.
• Act as a technical consultant to hospital staff, guiding them on equipment needs.
• Train hospital staff on proper equipment handling for optimal use.
• Lead and coordinate the medical equipment management team (commissioning, maintenance, inventory, decommissioning).
• Assist in preparing monthly reports and annual budgets.
• Ensure compliance with industry standards (ISO, JCI, OHSAS, etc.).

Requirements:

• Degree in Biomedical Engineering, Electronic or Electro-mechanical Engineering, or equivalent.
• 3-5 years of relevant healthcare industry experience.

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026

Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

• Supervise testing and commissioning of electrical equipment on-site and manage the review and submission of site acceptance test reports.
• Review and interpret Single Line Diagrams and Electrical Schematic Drawings.
• Support electrical equipment installation inspections to ensure compliance with standards.
• Participate in site activities and meetings with clients and contractors.

Requirements:

• Diploma in Electrical Engineering.
• At least 3 years of site installation, testing, commissioning and maintenance testing experience in Low/Medium Voltage Electrical Equipment.
• Possess initiative and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Identify customer needs and recommend product solutions.
• Responsible for the technical support for both presales and post sales.

Requirements:

• Degree in Electronics/Electrical Engineering
• At least 2 years of sales experience in artificial intelligence/physical security/CCTV or smart workspace solution.
• Knowledge of TCP/IP, Network Structure, Firewall, LAN and VLAN

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Perform pre- and post-sales technical support to customers.
• Provide support to the sales staff in technical presentations.
• Evaluate and establish a vision system performance specification.

Requirements:

• Diploma in any Engineering field
• At least 2 years of experience in field servicing and semiconductor industry.
• Able to troubleshoot electronics hardware system, PC hardware, OS and networking.
• Good understanding in Die Sorter or Wafer Sorter

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Provide presales support by solving technical business solutions for the client.
• Responsible for product demonstration, proposal writing, creating compliance table, training and product enablement.
• Develop working proficiency and obtain certifications on assigned products and technologies.
• Conduct hands-on POC independently and present vendor’s solution to partners and end-users.

Requirements:

• Diploma in Computer Studies or equivalent
• At least 2 years of presales experience in IT network and Cybersecurity domain.
• Good knowledge of security and networking infrastructure environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

TikTok Live client team focus has been focusing on delivery engaging and the best live streaming experience to global users. Our team develop creative and interesting features for streamers and viewers to express themselves and interact with others instantly. We are looking for passionate mobile software engineers to join us in this fast growing industry.

Responsibilities:

1. Design, implement the new-user features of our mobile application.

2. Collaborate with the design and product teams to create a world-class mobile experience.

3. Optimize mobile applications and user experience on the iOS platforms.

4. Promote robust and maintainable code, clear documentation, and deliver high quality work on a tight schedule.

Qualifications

1. BS/MS degree in Computer Science or equivalent majors with experience in native iOS development.

2. Proficiency in Objective-C or Swift.

3. Ability to understand and debug large and complex codebases.

4. Good team communication and collaboration skills.

5. Promote robust and maintainable code, clear documentation, and deliver high quality work on a tight schedule.

6. Livestream knowledge is a plus but not mandatory.

Preferred Qualification

Minimum 5 years relevant work experience from a large-scale internet business

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

About the Opportunity:
We are seeking a proactive and detail-oriented Project Engineer to join our client. This role offers a chance to work on diverse and impactful projects, in charge of their mechanical & electrical systems, collaborating with a dynamic team and various stakeholders to deliver innovative and tailored engineering solutions.

Responsibilities:

• Plan and execute project management duties, ensuring all key milestones are met on schedule.
• Develop and maintain the master project schedule, monitoring execution milestones.
• Collaborate with internal and external stakeholders to coordinate implementation activities.
• Provide technical support during project execution and liaise with engineering teams for feasibility studies and cost estimation.
• Prepare and submit project documentation, including monthly progress reports and technical submittals.
• Facilitate site meetings, coordinate with subcontractors, and oversee installation work, drawings, and material submissions.
• Support quality assurance efforts and ensure compliance with relevant standards.

Requirements:

• Diploma or Degree in Mechanical or Electrical Engineering with 3-5 years of project management experience.
• Strong interpersonal, oral, and written communication skills.
• Proficiency in reading and interpreting M&E drawings.
• Knowledge of relevant systems, equipment, and industry standards is an advantage.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

*We regret to inform that only shortlisted candidates will be informed.*

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

The company is a leading American multi-national in the field of industrial automation as well as integrated control solutions. With more than 20,000 employees globally and presence in Singapore for more than 30 years; we have the following opening within the Product Quality team in Singapore.

Engineer Assistant, Product Failure Analysis & Reliability Test

Responsibilities

Reporting to the Product Quality Manager, you will be part of a team of 12 Engineers in Singapore and India in a hands-on testing role on product quality. Your responsibilities include:

• Develop product test setups for Laboratory reliability testing
• Compile and generate comprehensive Product Analysis Report in a timely manner
• Responsible for initiating necessary activities for corrective action and closely working with various stakeholders to drive resolution
• Develop reliability test plan, test setup and execute testing such as HALT or ORT test (in internal or external laboratory)
• Design and generate ladder programming for use in reliability test
• Responsible of procuring required equipment, component and associated auxiliary materials for use in reliability test in a timely manner.
• Responsible for booking of external laboratory equipment to support testing schedule
• Responsible in generating test report upon completion of testing and communicating with required stakeholders on anomaly observations.
• Conduct troubleshooting of module or reliability setup if anomaly are observed

Requirements

• Minimum Diploma in Electrical & Electronics Engineering with experience in conducting failure analysis on PCBA level with good basic understanding of PCBA assembly & testing processes.
• Prefer candidates with experience in an electronics assembly environment
• You should have be hands-on in building test setup, operates reliability chambers (e.g. temperature chamber or vibration chamber etc).
• Understanding of Electronic Manufacturing, Assembly and Test processes

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Responsibilities:

• Plan, design and administer contract/project of mechanical and electrical engineering works for building service including Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Job Description

• Industry/ Organization Type: Manufacturing/ Supply Chain
• Position Title: Facility Engineer
• Working Location: Tuas
• Working Hours: 5 days (Monday - Friday, 8 AM - 5 PM)
• Salary Package: Basic Salary + Transport Allowance ($750) + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintenance of building, facilities, and security at all Company’s sites.
• Coordinate and execute, when necessary, inspection, testing, general maintenance, and repair of the critical site systems and equipment.
• Ensure that all equipment and other facilities are working properly.
• Critical systems and equipment include power/ UPS, backup generator, and fuel supply. HVAC (Heating, Ventilation, Air Conditioning), plumbing/ water supply, security doors/ alarms/ cameras, Fire safety systems and equipment.
• Provide situation/ status updates to the Facility Manager on issues which are to be resolved and the critical system or equipment is fully operational.
• Initiate interventions to solve problems in the facilities and develop a system for cleaning, repair and maintenance of facilities.
• Deliver timely and efficient solutions to facility-related requests.
• Liaise with contractors on maintenance/ repair.
• Supervise contractor on-site.
• Review the risk assessment submitted by the contractor prior to the commencement of work.
• Ensure required safety requirements are in place prior to the commencement of work.

APPLY NOW!!!

• Diploma in Engineering or equivalent
• At least 2 years of work experience in Facility Management
• Possess own transport is an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #65726 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities

• Understand and analyse the customer’s needs;
• Find the best solution and lead the architecture definition to meet the customer requirements;
• Interface with the customer, for the technical related aspects of the solution;
• Support the sales and marketing teams by providing internal and external technical pre-sales support for the solutions and services, taking the lead of the architecture aspects in strong cooperation with all the required technical and non-technical skills involved (e.g. hardware, software, security, quality, maintenance);
• Lead the Make/Team/Buy decision process and support the partner & subcontractor choice throughout the capture & delivery activities;
• Be in charge of the executive and technical documentation for tenders and support handover to projects (including but not limited to design documentation);
• Any other ad hoc duties as assigned by supervisor.

Qualifications

· Bachelor's degree in Computer Science, Cybersecurity, or a related field.

· Experience with Thales HSM or similar cryptographic solutions.

· Strong understanding of cryptographic algorithms and protocols.

· Familiarity with compliance standards (e.g., PCI-DSS, GDPR).

Interested applicants, please email your resume to Andre Chua Jing Ming

Email: [email protected]

CEI Reg No: R1989053

EA Licence No: 99C4599

Recruit Express Pte Ltd

Responsibilities:
· Designing and detailing of Civil & Structural engineering works;
· Co-ordinating with clients’ representatives, Project Managers and Consultants Team from inception to completion of projects;
· Providing periodical site inspection and attending meetings during course of construction of projects; and
· Responsible for timely submission of reports and completion of projects for tender/submission with target dates.

Requirements:
· A recognised Degree in Civil/Structural Engineering by PEB;
· Minimum 1 - 2 years experience in a similar capacity;
· Procient in Civil and Structural Engineering software applications;
· Those with design experience will be an advantage;
· Positive attitude, self motivate and responsible;
. Fresh graduates are encouraged to apply.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628