Work Hours:

• Monday - Friday, Shifts

Responsibilities

• Assist engineer to carry out all the Test related activities
• Support & implement different product configuration setup
• To test, analyze and perform troubleshooting on product failures
• Working closely with process and test engineers on yield improvement
• Participate in the Kaizen activities
• To update test tracking records
• Prepare and update Working Instruction
• To support the NPI Process and production runs
• Participate in ISO activities (implementation & maintain)

Requirements

• Nitec & above qualification in engineering with at least 1-3 years of working experience in testing and debug environment
• Good team player
• Ability to work with Peers, engineers, and superiors
• Able to multi-task & work under pressure
• Good understanding of test methods and concepts
• Knowledge of programming and debugging skills

RBA Compliance.

• Design and develop ATE (Automated Test Equipment) programs for new products, covering both production and characterization testing.
• Engage in hands-on testing debugging, conduct RMA analysis, and enhance testing solutions for both hardware and software.
• Develop a test plan for the product, including scheduling, resource needs, and overseeing project tracking and execution.

Requirements:

• Degree in Electrical/Electronics Engineering
• At least 3 years of leadership experience in ATE test program development.
• Proficient in C++/ VB, ATE testers and Chroma.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

The Opportunity

• Our client, a Global MNC in the Semiconductor industry
• Seeking for Manufacturing Technicians x 10
• 5 days work shift, 8.5 hours
• Nearest MRT: Upper Changi
• Company Transport provided

The Talent

• NITEC or Higher NITEC or Diploma in Electrical, Electronics, Mechanical, Mechatronic, Microelectronics or any Engineering related studies
• Experience in Assembly, Build, Test, Preventive Maintenance
• Candidates with or without experience are welcome to apply!

The Job

• Working in the Production Centre and Cleanroom environment
• Responsible for maintenance and troubleshooting of the Tools and Equipment
• Handling testing and assembled equipment
• In-charge of the set-up and calibration of the equipment/machine/tool
• Understanding electrical/mechanical diagrams and drawings
• Perform QA/QC checks duties

Next Step:

• Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package.
• Simply click on 'Apply here' to drop your resume or email to [email protected]
• All shortlisted candidates will be contacted.

Edmond Lee
Direct Line: 8206 8857
EA License No: 91C2918
Personnel Registration Number: R23114813

The Opportunity

• Our client, a Global MNC in the Semiconductor industry
• Seeking for Manufacturing Technicians x 10
• 5 days work shift, 8.5 hours
• Nearest MRT: Upper Changi
• Company Transport provided

The Talent

• NITEC or Higher NITEC or Diploma in Electrical, Electronics, Mechanical, Mechatronic, Microelectronics or any Engineering related studies
• Experience in Assembly, Build, Test, Preventive Maintenance
• Candidates with or without experience are welcome to apply!

The Job

• Working in the Production Centre and Cleanroom environment
• Responsible for maintenance and troubleshooting of the Tools and Equipment
• Handling testing and assembled equipment
• In-charge of the set-up and calibration of the equipment/machine/tool
• Understanding electrical/mechanical diagrams and drawings
• Perform QA/QC checks duties

Next Step:

• Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package.
• Simply click on 'Apply here' to drop your resume or email to [email protected]
• All shortlisted candidates will be contacted.

Edmond Lee
Direct Line: 8206 8857
EA License No: 91C2918
Personnel Registration Number: R23114813

Responsibilities:

• Develop and execute API/UI/Functional tests with CI/CD.
• Design, develop and maintain automated test framework, tools and test cases
• Work in a scrum team of software developers and domain experts. Accountable for quality of the software product under development.
• Perform manual testing when necessary.
• Software release following SGLC guidelines. Collaborate with peers to identify opportunities for process improvement.
• Participate in design and code reviews
• Learn, grow and have fun with highly capable engineers and scientists from various disciplines in a global R&D team

All listed tasks and responsibilities are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities.

Who we are looking for:

• Strong understanding in automated testing using at least one programming language, such as Python, Java, C#, TypeScript or JavaScript
• Strong understanding in Linux Shell scripting or equivalent command line tools
• Knowledgeable with software test methodologies such as API, Web, GUI, performance testing, with hands-on experience in frameworks and tools such as Karate, Cucumber, Gherkin and Playwright
• Strong analytical capabilities and able to troubleshoot complex issues
• Good knowledge with CI/CD tools such as Jenkins, TeamCity, GitHub Actions
• Strong understanding in databases such as MySQL or PostgreSQL, cloud computing such as Amazon Web Services and Docker/Kubernetes is a plus
• Solid understanding of SDLC processes
• Be curious, detail oriented, and analytical, with a proven ability to learn quickly
• Proactive and team-oriented with strong collaboration skills; comfortable working across functions and time zones

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities.

Preferred Experience/Education:

• Typically requires a minimum of 0 - 2 years of related experience with a Bachelor’s degree
• Experience in biotech and bioinformatics is a plus

Test Technician x 7

Responsibilities:

• Assist engineers with test-related activities.
• Implement product configuration setups.
• Test, analyze, and troubleshoot product failures.
• Collaborate with engineers on yield improvement.
• Participate in Kaizen and ISO activities.
• Maintain test tracking records and documentation.

Requirements:

• Nitec & above qualification in engineering with at least 1 to 3 years of working experience in testing and debug environment
• Ability to work with Peers, engineers, and superiors
• Perform shift work

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Roles & Responsibilities:

• Manage Channels, Client Lifecycle & Compliance testing across the platform.
• Work with IT Project Manager, System Analyst, Business Analyst, and testing vendor to define and agree on testing strategy, scope and coverage.
• On board new test resources and ensure appropriate planning is done.
• Manage testing vendor team and handle statement of work.
• Support testing team throughout test cases design and execution of test cases.
• Review test scenario and test cases created.
• Co-ordinating with various teams to ensure testing schedule and deadlines are met.
• Reviewing deliverables such as Test cases, Test plans, Requirement Traceability Matrix, Closure reports, daily and weekly status reports.
• Track and manage defects throughout the test period until closure and sign off for the SIT, UAT, Regression and performance testing.
• Monitor progress of test execution to ensure meeting testing timeline.
• Ensure all of testing deliverables are met and the OCBC procedures and processes are adhered too.
• Conduct Defect management meeting with development vendors/internal teams and UAT users.
• Solution upcoming projects to provide the testing cost for those initiatives.
• Planning, monitoring, and control of all testing activities and tasks.

Qualifications

• Proven working experience in test delivery with 10+ year of relevant experience in banking and Finance, with 5+ years of Test Management experience.
• Strong testing domain in Client onboarding for Wealth Management and MSCRM experience is a MUST and the candidate needs to have the skillset listed in table below:

Skillset

Domain and Product Knowledge

• Extensive working Knowledge on Client lifecycle (Client Onboarding, Client Maintenance, Account Mandates, Client Periodic Reviews, Account Closure) is required.
• Comprehensive knowledge on Compliance requirements for Private Banking customers (Name screening, Risk scoring, Client Suitability Reviews, Source of Wealth validation, AML, Suspicious Transaction reporting) is required.
• Comprehensive knowledge on interfaces involved in supporting the Private Banking customers and accounts services.
• Comprehensive knowledge on MSCRM. Is required
• Extensive knowledge on Digital Channel implementation (Web, and Mobile) for Front Office users, IAM users and Clients.
• Comprehensive knowledge on Client Reporting and Regulatory Reporting.
• Good knowledge of SDLC processes, testing methodology and different types of testing.
• Strong domain knowledge in Client Lifecycle Management Digital Channels is a MUST
• Familiarity of testing tools such as JIRA, Confluence etc.
• Experience in a wide variety of testing efforts, techniques, and tools.
• Good vendor management skills and proven experience in stakeholder management.
• Experience in resource management and leading the team.
• Excellent communication (spoken and written) skills, able to work independently and as a team player.
• Bachelor’s degree in computer science, Information Technology, or a related field. Master’s degree is a plus.
• Relevant certifications (e.g. ISTQB Certified Test Manager) are highly desirable.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As an Engineer under Engineering- Manufacturing System and Automation, you will be tasked to provide operational technical support to drive productivity and product quality with GxP compliance and regulatory requirements. You will also assist to drive/ execute control and automation projects and provide maintenance, backup and restore for IPC and PLCs. You will also carry out / support investigation for non-conformances.

In this role, a typical day will include:

· 1st level engineering support for major equipment downtime [24x7 supports]

· Focus on solving recurring/ long-term equipment issues through detailed understanding of the design or engineering concepts.

· Maintain and perform routine check and backup/restore for Industrial PCs/ PLCs.

· Lead and support automation/control related projects. Develop/review project documentations and related SOPs. Perform equipment/software validation.

· Prepare training materials on respective process/ system/ equipment in term of operation, maintenance or troubleshooting.

· Innovate, provide and implement ideas for process or equipment improvement.

· Ensure the system/equipment are comply with HSE, and Alcon quality requirement

WHAT YOU’LL BRING TO ALCON:

· Minimum 0-3 years of intensive hands on experiences in technical (Electrical/ Mechatronic /Electronic/Physics/ Automation) troubleshooting and experience on Siemens S7/TIA Portal, Beckhoff TwinCAT and/or Allen Bradley PLC.

· Experience on factory automation system installation/validation and understanding of GMP/GDP requirement.

HOW YOU CAN THRIVE AT ALCON:

· Good team player

· Enjoy working with various cross functional team across manufacturing site

Alcon Careers

See your impact at alcon.com/careers

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

· Site project management.

· Overall project planning, scheduling, monitoring and updating to meet project completion targets.

· Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

· Work closely with sub-contractors on project progress and ensure timely work arrangements

· Liaise with consultant and carry out site inspection.

· Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

· Preparation of structural analysis, loading calculation and drawings.

· Establish good relationship with all relevant parties.

· Ensure site safety & compliance to authorities’ requirements.

Requirement

- Degree in Civil or relevant Engineering

- 3-5 years’ minimum experience in Infra-structure project more than 200million.

· Site project management.

· Overall project planning, scheduling, monitoring and updating to meet project completion targets.

· Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

· Work closely with sub-contractors on project progress and ensure timely work arrangements

· Liaise with consultant and carry out site inspection.

· Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

· Preparation of structural analysis, loading calculation and drawings.

· Establish good relationship with all relevant parties.

· Ensure site safety & compliance to authorities’ requirements.

Requirement

- Degree in Civil or relevant Engineering

- 3-5 years’ minimum experience in Infra-structure project more than 200million.

Job Description :

• Project management and daily operations including inspections, handover, site measurements, project management.
• Prepare submission of shop drawing, method statement, progress claims and project management reports.
• Supervise and monitor projects are carried out in accordance to company's operating procedures, quality standards and contractual specifications.
• Ensure environmental, safety and health practices are carried out at all times.

Requirements :

• Candidate must possess at least a Diploma / Bachelor's Degree in Civil Engineering or its equivalent.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Min. 5 years of working experience in Construction Industry are preferred.
• Strong analytical and communication skills.

· Site project management.

· Overall project planning, scheduling, monitoring and updating to meet project completion targets.

· Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

· Work closely with sub-contractors on project progress and ensure timely work arrangements

· Liaise with consultant and carry out site inspection.

· Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

· Preparation of structural analysis, loading calculation and drawings.

· Establish good relationship with all relevant parties.

· Ensure site safety & compliance to authorities’ requirements.

Requirement

- Degree in Civil or relevant Engineering

- 3-5 years’ minimum experience in Infra-structure project more than 200million.

Able to design the electrical system in the construction projects.

Must ensure compliance in the electrical systems.

Able to do coordinate installation.

Able to do maintenance and test activities.

Able to solve the issues in the electrical projects in the construction projects.

Able to lead the team of workers and site supervisors.

• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and coworkers about analysis results

Responsibilities:

• Analyse project/business needs and necessary technical requirements, activities and employees, monitor planning continuously and take corrective measures if necessary.
• Coordinate the different technical activities (conceptual design, built, mobilisation, commission, maintenance and repair) in own focus area.
• Prepare and request budget for technical activities (based on detailed specifications), manage actuals and present views.
• Ensure conceptual, basic and detailed design is executed according to needs defined and in accordance with compliance regulations.
• Write technical specifications to workshops/shipyards, suppliers and service providers for technical asset production, repair and/or maintenance, evaluate proposals and decide on parties, in accordance with Technical Specifications and in agreement with Technical Manager, draft contract/PO and ensure execution/delivery according to these agreements.
• Have relevant expertise in the technical field, keep up with relevant developments in the own area and related areas of expertise and contribute to the (technical) field by developing new, state of the art knowledge and exchanging knowledge with colleagues.

Requirements:

• Relevant tertiary qualifications/Degree/Diploma/Master in Science or Engineering (or equivalent knowledge and experience)
• With minimum 7 years of relevant work experience
• Meticulous, organised and attentive to details in the midst of a fast-paced environment
• Analytical and problem-solving skills
• Excellent verbal and written communication skills in English
• Proficiency in MS Excel and IT skills

Our Company
Powerzone H2 Technologies is a provider focusing on the design, manufacture, and distribution of PEM fuel cells.
We aspire to be the leader in Hydrogen fuel cell system integrator and solution provider in the APAC region.
We are hiring a talented engineering professional to join our team.
If you're excited to be part of a winning team, Powerzone H2 Technologies is a great place to grow your career.

Job Scope

· Work with the research center for scale-up production/ manufacturing· Troubleshoot and advise on electrical and mechanical Fuel cell systems together with superior. Do fuel cell product testing

· Monitoring stock level and dealing with suppliers for the production process

· Answer all technical enquires and maintenance requirements from customers as assigned by the Manager

· Complete projects on time and within budget. Carry out any other work directly by your immediate superior or Director

· Cooperate with the team to solve problems

Requirement

· Bachelor's Degree or equivalent in Engineering or Other Advanced Diploma / Post-Diploma qualifications in Electronic Certificate equivalent

· With at least 2 years of working experience in a relevant field ( Fresh graduates are welcome to apply)

· Good computer skills i.e MS Office Suite and MS Project, Autocad, Photoshop

· Fast learner

· Good problem-solving, organizational, analytical, and critical thinking skills

· Ability to manage your project effectively

· Must be able to work in a team environment, including the ability to manage vendors and project stakeholders

· Demonstrate proactiveness in handling tasks at hand.

· Previous experience working with lab/industrial equipment required (if applicable)

Responsibilities :

• Perform electrical and electronic conceptual details design work.
• Responsible for the analysis, definition, design, construction, testing, installation, modification, and maintenance of automated machines, containing software as the major component.
• Writes new machine program, makes modification to existing machine software, or integrates software application.
• Creates and executes until testing and integration testing ensuring machine software meets requirements.
• Identify, define and implement the technical architecture for use of auto visual inspection in our product within budget and schedule.
• Review electrical and electronic documents/drawings.
• Creates, reviews, and maintains all required technical documentation/manual related to assigned software to ensure supportability and reuse.
• Participate in project planning sessions with team members to analyze development requirements.
• Reviews project work with the team, included the machine design engineers and engineering engineers.
• Provide timely status updates for areas of individual responsibilities within projects to superior.
• Provides technical support to operations or other development teams.
• Overall responsibility for technical issues and coordinate with other disciplines.
• To participate in the continuous improvement programs to explore ways and means to improve production efficiency and reliability.

Requirements :

• Bachelor's Degree in Electrical, Electronics Engineering with min one (1) years of relevant experience.
• Experience working with vision system database.
• Knowledge of camera, light, and lens selection for applications ranging from defect detection to part location.
• Programming background with high-level languages such as Visual C# WPF, C++ and Python.
• Experience in developing vision system with Halcon and Opteon camera.
• Good knowledge in Machine Vision programming and experiences.
• Good experience on automation controls, motors & sensors like PLC, CTC, Beckoff PC and controllers, Servo & Stepper motors.
• Familiarity with wiring/cabling size/terminations and load/temperature requirements.
• Familiarity with industrial machinery design.
• Skilled in the utilization of statistical analysis.
• Required to travel regionally (average 20% of the time).
• 5 days work week.
• Transport pick-up at Bedok MRT station.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Key Responsibilities:

• Responsible for MEP Design, taking off BOQ, sourcing the quotation and prepare quotation.
• Lead the development and submission of high-quality M&E tenders, ensuring compliance with all client requirements and deadlines.
• Attend site visit for tender briefing.
• Interpretation of tender specifications, client requirement, drawings and any other relevant documents; not limited to Project Presentation, Schedule of Rates, Technical Data, Risk Assessment, Bill of Quantity and documents needed for Tender Submissions.
• Understand how to do MEP design to comply with Singapore Standard
• Liaise with suppliers and contractors to get proposals/quotations and carry out evaluation
• Able to assist client for Value Engineering
• Conversant with Singapore building codes and regulations
• Demonstrate effective communication and consultative skills
• Strong in communication skills and a team player
• Provide guidance and support to project teams in the implementation of successful M&E practices.
• Ensure adherence to company policies and procedures throughout the tender process.

Job Requirements:

• Preferably hold a Diploma or Degree in Electrical Engineering
• At least 2 years of relevant working experience in Interior Fitting Out M&E Works
• Preferably have knowledge on how to prepare M&E technical design, technical write-up, prepare tender specifications and presentation slide for tender interviews
• MUST understand the process of tender preparation and submission
• MUST have experience in project costing and estimating
• MUST know BCA Green Mark Requirement
• Strong in Tender Presentation Skill
• Highly self-motivated, good working attitude with high level of professionalism & integrity
• Well-versed in MS offices tools i.e. Words, Excel and PowerPoint
• Strong understanding of M&E methodologies and best practices.
• Excellent written and verbal communication skills.
• Requires travelling to various worksites in Singapore
• Requires to perform night work/weekends when need arises
• Candidates with more experience may be considered for a senior role.
• This position is only open to Singapore citizens and Permanent Residents.

About the Role:

As a CBRE Contract Support Associate, you will provide exceptional customer service and administrative support to a large Business Unit, Facility, or Account. This job is part of the Contract Quality Management job function. They are responsible for managing the delivery of contractual services to ensure requirements are fulfilled.

What You’ll Do:

• Respond to client inquiries and concerns and ensure timely and quality service delivery and follow-up to ensure satisfaction.
  Understand the scope of the contract and make sure that all work is carried out accordingly.
  Be a financial and operational systems champion.
• Suggest efforts to put in place cost-saving opportunities to maximize customer and financial savings targets.
  Coordinate and onboard vendors for reactive and planned works and manage sub-contractor paperwork.
  Review processed invoices and ensure accurate cost center coding. Coordinate the billing application, calculating margins, raising invoices, and submitting to clients.
• Work closely with site teams and head office, ensuring accurate processing of quotations and purchase orders.
• Review and approve maintenance billing invoices and projects as per contracted agreements. Ensure consistent delivery of core operational and financial outputs on the account.
• Respond to inquiries on financial reports for Accounts Receivable, Payable, and open POs.
• Deliver monthly reporting support on Contract and Business Unit Reviews.
• Assist in ensuring compliance with Health & Safety requirements, including HSE reporting and promoting a safe work environment.
• Maintain QHSE documentation and ensure it is available using company systems.
• Gather and analyze data to identify and solve complex problems that arise with little or no precedent. May recommend new techniques.
• Impact own team and other teams whose work activities are closely related.
• Suggest improvements to existing processes and solutions to improve the efficiency of the team.
  
  What You’ll Need:
• High School Diploma or GED with 3-4 years of job-related experience.
• A comprehensive understanding of a range of processes, procedures, systems, and concepts within own job function is required.
• Ability to evaluate and communicate unusual and/or complex content in a concise and logical way.
• In-depth knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.
• Organizational skills with an advanced inquisitive mindset.
• Advanced math skills. Ability to calculate advanced figures such as percentages, discounts, and markups.

Job Description:

• Conduct preventive, corrective maintenance & installation on monitoring systems, minimizing downtime and ensuring optimal system functionality.
• Proficiently interprete engineers' 2D drawings provided by Design engineer, ensuring accurate assembly procedures.
• Execute hands-on machine assembly setups, demonstrate precision and attention to details throughout the process.
• Conduct panel wiring for product testing, ensuring functionality and adherence to specifications.
• Possess extensive knowledge in wiring AC/DC, relay systems and PLC, contributing to efficient and reliable system operations.
• Apply expertise in panel and PLC wiring setups at production lines, ensuring seamless integration and functionality.
• Employ observational analysis to identify root causes of operational issues in devices, contribute to efficient problem-solving strategies.