About the Job:

Job Title: Automation Engineer/Senior Automation Engineer

Location: Singapore, On-Site

Responsibilities:

· Responsible for design, coding and support of DeltaV system on site.

· Partial or full ownership in development and implementation of hardware and software solutions pertaining to industrial standards.

· Design and develop system architecture, functional specifications, control strategies and supporting documents as per industry standards.

· Review the life cycle documents/deliverables for the project.

· Determine the process requirements and translate them to automation design.

Resquirements:

· Bachelor’s degree in Automation, Electrical or Bioengineering,

· Experience in Emerson DeltaV DCS or similar, ideally in Pharma industry.

· Experience in designing and commissioning of DeltaV DCS or similar for pharma industry.

· Technical proficiency in determining hardware and software solutions for control systems.

· Familiarity with networking, field devices, control panel design and PLC control systems.

· Experience with design and configuration of communication protocols and interface between DeltaV DCS and other systems.

· Good understanding of S88 and cGMP standards.

· Highly skilled in design of Physical and Procedural layer in batch design.

· Ability to be a team player at all levels.

· Experience in automation roles for FAT, SAT and site commissioning.

· Knowledge of MES interface will be an advantage.

Interested candidates please reach out to us.

Phone: +65-92414243, Email: [email protected]

Job Overview

Candidate will be responsible for improving yield and device performance of automotive chips during production ramp, and high-volume manufacturing.

• Analyze yield, process, diagnostic, and semiconductor test data to ramp production volume, support lot disposition, drive baseline yield improvement, and isolate root causes of yield loss and product performance degradation.
• Support foundry / assembly house on process qualification, test house management, test probe card, load board and tester validation on performance over process and operating condition, debug and release test program into mass production.
• Collaborate with wafer foundries, assembly and test houses and Qualcomm PTE (product and test engineering) team to isolate root causes of yield loss and drive improvements.
• Interface with management and business teams to provide yield outlook for product planning and cost analysis.
• Lead teams and task forces to address and drive resolution of yield excursions.

Minimum Qualifications

- 3+ years experience with ATE test platforms, especial familiarity with Advantest 93K.
- Good understanding of VLSI test techniques.
- Basic understanding of digital/analog functional block and electronic circuits.
- Basic data analysis skills.
- Fluent in English, both spoken and written.
- Proactive working attitude.
- Capable to handle new challenge.

Preferred Qualifications

- Basic knowledge of design for test, design for manufacturing, design for experiment.
- Basic knowledge of reliability test, and quality concept.
- Basic knowledge of foundry process, assembly process, and failure analysis.
- Good experience with yield management software (O+ or exensio)
- Understand yield management, continuous improvement and cost reduction in a high volume fabless semiconductor environment
- Understand test house working model, supply chain and KPI.

- automotive related experience is preferred

Work Location: 6 Tampines Industrial Avenue 5 Singapore 528760
Work Day : Monday - Friday, 8.30am - 5.30pm

Responsibilities:

• To lead a team of Engineers to carry out all the Test related activities for Server & Rack products for the production
• To support & implement PXE Server configuration for the products
• Perform & maintain the Server & Rack run-in test process
• Perform & maintain the burn-in & power test process
• To liaise with customer & HQ / factory on the test program implementation and maintenance
• To test and analyze all failures in the production products and work back with customer & HQ / factory for improvement
• Participate in the Kaizen activities
• To update the test program master list & tracking
• To prepare and update Working Instruction
• To provide training over W/I to production
• To support the NPI Process
• To support production on the mass run
• Participate in ISO activities (implementation & maintenance)

Requirements:-

• Min. Diploma in Engineering discipline with min 3 years relevant experience in Server / Rack/ Manufacturing environment
• Ability to work with the customer, HQ / factory, Peers / Subordinate and Superiors
• SAP & Linux knowledge
• Able to multi-task & work under pressure
• Good understanding of test methods and concepts
• Knowledge of programming and debugging skills

Compliance with RBA standards

Responsibilities: -

• Create and execute test plan among several systems.
• Stakeholder management during creation and executive of test plan
• Prepare and present regular project reports and documentations.
• Ensure project status and progress are communicated to stakeholders and IT teams in a timely and concise manner.
• Assume agreed projects that may be assigned from time to time in tandem with business priorities/requirements.

Requirements:

• Bachelor’s degree in information technology, Computer Science or equivalent
• Min. 5 years’ experience in supporting IT Project test phase in the banking sector.
• Experience in leading creation for test plan and test definition for Bank IT system.
• Coordination with other system personnel.
• Provide timely escalation and resolution of significant issues to Management.
• Act as test manager and understand business requirements for Core Banking System and Fund Transfer for transaction of Bank systems, other related bank systems
• Knowledge in software test methodology, to creation test plan, lead test document creation, lead test execution,
• create test result analysis, software quality management.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY Singapore PTE LTD)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

About the Role:

We are seeking a motivated and detail-oriented Junior Test Engineer to join our team. In this role, you will be responsible for ensuring the quality and reliability of our operations system through testing and continuous improvement. If you are passionate about quality assurance, have an eye for detail, and are eager to grow in the field of software testing, we would love to hear from you!

Objectives of this Role:

1. Ensure the highest quality of our operations system by developing and executing tests to detect and report any errors in the product.

2. Develop suitable testing plans and frameworks that align with our customers' needs.

3. Coordinate with various functions and teams to incorporate necessary product changes.

Responsibilities:

1. The role involves writing test cases, preparing and creating test data, executing and retesting test cases.

2. Able to leveraging on inhouse GenAI for test case creation and enrichment

3. Ensure test runs and results are completed within the given time frame.

4. Develop and execute test plans to validate software functionality against requirements and specifications.

5. Identify, report, and track software defects and issues.

6. Perform functional, performance, security, and regression testing of software products.

7. Report test results and defects to the development team and other stakeholders, and work on their resolution.

8. Provide suggestions and feedback to improve the quality of the software development process across teams.

9. Stay updated with the latest testing tools, techniques, and methodologies.

10. You will work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations

Required Skills and Qualifications:

1. Degree or diploma in computer science, engineering, or similar technical certifications.

2. At least 1-3 years of experience in testing, quality assurance, or similar roles in the banking industry is non nego

3. Excellent problem-solving skills, an analytical mindset, and strong communication skills.

Preferred Skills and Qualifications:

1. Proficiency in testing tools such as JIRA, Selenium, Appium, and other testing frameworks.

2. Certifications such as ISTQB (International Software Testing Qualifications Board) and CSTE (Certified Software Tester).

Internal ref: 9278

Regards,

Lini

Recruitment Consultant

R22108463

Responsibilities:
1. The role involves writing test cases, preparing and creating test data, executing and retesting test cases.
2. Able to leveraging on inhouse GenAI for test case creation and enrichment
3. Ensure test runs and results are completed within the given time frame.
4. Develop and execute test plans to validate software functionality against requirements and specifications.
5. Identify, report, and track software defects and issues.
6. Perform functional, performance, security, and regression testing of software products.
7. Report test results and defects to the development team and other stakeholders, and work on their resolution.
8. Provide suggestions and feedback to improve the quality of the software development process across teams.
9. Stay updated with the latest testing tools, techniques, and methodologies.
10. You will work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

BIOTRONIK is a leading Medical Device company dedicated to revolutionizing patient care through innovative medical device software solutions. With a commitment to cutting-edge technology and a passion for improving healthcare outcomes, we are at the forefront of transforming the industry.

We are seeking a skilled and motivated Cloud Test Engineer to join our team. In this role, you will play a crucial part in ensuring the quality and reliability of our cloud-based software solutions for medical devices product.

If you are passionate about leveraging cloud technology to make a positive impact on medical device product, we want to hear from you.

Your Responsibilities

• Develop and execute test plans, test cases, and test scripts for Cloud-based software solutions, ensuring thorough testing coverage.
• Collaborate with cross-functional teams, including software developers, product managers, and quality assurance professionals, to identify and address software defects.
• Design, implement, and maintain automated testing frameworks for cloud-based applications to enhance testing efficiency and scalability.
• Conduct performance testing, load testing, and stress testing of Cloud-based software systems to ensure optimal performance under various conditions.
• Work closely with regulatory affairs and compliance teams to ensure testing proceccess align with industry standards and regulations.

Your Profile

• Bachelor’s Degree in Computer Science, Software Engineering, or a related field; advanced degree preferred.
• Proven experience as a Test Engineer is preferable.
• Experience with automated testing frameworks such as Selenium, Junit and Gherkin.
• Familiarity with cloud platforms such as AWS, Azure, or Google Cloud Platform.
• Strong analytical skills and attention to detail.
• Excellent communication skills and the ability to collaborate effectively in a team environment.
• Prior experience from the healthcare or medical device industry would be an added advantage.

What we offer

• being encouraged to think and act entrepreneurially
• working in global teams and projects
• developing yourself professionally

Job Responsibilities:

Test Planning and Strategy

• Lead the development of comprehensive test strategies and plans in collaboration with stakeholders.
• Define test objectives, criteria, and priorities based on software requirements and business goals.
• Ensure alignment of testing efforts with project timelines.

Test Execution

• Execute hands-on testing, including manual and automated testing, to verify software functionality, performance, and security.
• Conduct rigorous regression testing, exploratory testing, and user acceptance testing (UAT).
• Review and approve test cases and test scripts for accuracy and coverage.

Test Automation

• Develop and maintain automated test scripts using industry-standard tools and frameworks.
• Champion test automation best practices and contribute to the growth of automation coverage.
• Continuously improve the test automation infrastructure for efficiency and scalability.

Defect Management

• Establish and maintain a defect-tracking system.
• Ensure defects are documented, prioritized, and resolved in a timely manner.
• Communicate defects and testing progress to stakeholders.

Collaboration and Communication

• Collaborate closely with software developers, product managers, and other stakeholders to resolve issues and improve product quality.
• Communicate testing status, results, and recommendations to senior management.

Test Documentation

• Create and maintain test documentation, including test plans, test cases, and test reports.
• Ensure that testing documentation is up-to-date and accessible to the team.

Job Requirements:

• Proven experience as a Software Test Engineer, with a focus on automation and leadership.
• Strong knowledge of software testing methodologies, tools, and best practices.
• Proficiency in programming/scripting languages (e.g., Typescript, Svelte, Golang).
• Extensive experience with test automation tools and frameworks (e.g., Playwright, Testify, Selenium).
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills.
• ISTQB or similar certification is a plus.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Job Highlights

• Great opportunities for learning & career advancement
• Positive & friendly working environment
• Medical insurances and dental coverage

Job Description

Engineer – Full time permanent

Work location – 37 Kaki Bukit Place S416215

Company background – Wire harnessing & mechanical assembly

Salary - $3,200 ~ $3,600

Benefits – Group Medical/GPA Insurance/AWS/VB/Dental

Working hours – Monday to Friday 8am to 5.30pm

Responsibilities

• NPI activities
• Product costing
• Ensure engineering quality standards are meet accordingly.
• Ensure all drawings are well maintained.
• Confirmation on drawings for new and existing models.
• Generate of Engineering reports/documents.
• Training of QC inspector on inspection procedures.
• Co-ordinate with internal department to carry out project/models.
• Carry out job/backup assigned by Superior.

Requirements

• Diploma in Electrical/Electronics/Mechanical Engineering or related discipline.
• Industrial engineering background
• Team Player / Independent / Initiative.
• Good time management and able to multi-task in fast paced environment.

CD Engineers is a well establish engineering company dedicated to providing practical and cost-effective designs for storage and use of flammable and hazardous material in industrial applications to our client from conceptual to detailed design to authorities permitting and project construction.

To support our growth, we require energetic innovative engineers to assist in:

· Conceptualizes concept and schematic designs.

· Execute feasibility studies and presents design proposals.

· Preparation of tender documentation, schedules and specifications.

· Liaises and coordinates with clients, consultants and contractors.

· Ensure design quality and authority compliance.

· Attend design and project meeting.

· Prepare work schedule and progress report.

Requirements:

· Degree or Master in Sciences or Engineering.

· Fresh Graduate will be considered for entry level.

· Strong in communication skill and proactive in solving issues.

· Ability to work independently and within a team.

· Those with experience in building services industry background are welcome.

· In-house training for specialised skill will be provided.

Job Description

• Manage project cycle to meet the deadline.
• Coordinate with external parties and customers to plan, organize and direct activities concerned with assigned projects.
• Develop project schedules in compliance with customer requirements, deadlines, and/or milestones.
• Develop mechanisms to track schedule progress in the field and update the schedule regularly.
• Responsible for site activities, coordination and supervision works related to engineering and system design.
• Ensure timely completion of all projects particularly the T/C schedules.
• Responsible for project management including attending meetings, coordination, design etc.
• Create AutoCAD Drawings, Submission & Documentation Responsible for completion of project which involves go on site troubleshooting, Testing & Commissioning and meetings.

Requirements

• At least 2 Years of local working experience in the related field is required for this position.
• Ability to work independently and target oriented in a fast-paced environment.
• Able to visit job site.

The Opportunity

• Our client, a Global MNC in the Semiconductor industry
• Seeking for Manufacturing Technicians x 10
• 5 days work shift, 8.5 hours
• Nearest MRT: Upper Changi
• Company Transport provided

The Talent

• NITEC or Higher NITEC or Diploma in Electrical, Electronics, Mechanical, Mechatronic, Microelectronics or any Engineering related studies
• Experience in Assembly, Build, Test, Preventive Maintenance
• Candidates with or without experience are welcome to apply!

The Job

• Working in the Production Centre and Cleanroom environment
• Responsible for maintenance and troubleshooting of the Tools and Equipment
• Handling testing and assembled equipment
• In-charge of the set-up and calibration of the equipment/machine/tool
• Understanding electrical/mechanical diagrams and drawings
• Perform QA/QC checks duties

Next Step:

• Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package.
• Simply click on 'Apply here' to drop your resume or email to [email protected]
• All shortlisted candidates will be contacted.

1. Manage the team of RTOs, supervision of site set up, earth works, drainage works and reinstatement works

2. Report to Qualified Person

3. Prepare weekly reports and monthly reports.

4. Attend the meeting with client and consultants

5. Report any non-compliances to Qualified Person

6. Ensure the site Safety

Job Description

• Plan, propose, coordinate and execute utility diversion related works
• Liaise and coordinate with clients, consultants and sub-contractors on project coordination
• Liaise with utility agencies e.g. SPPG, telco & etc
• Supervising and managing utility site related site construction, installations, testing and commissioning activities
• Prepare documentation (method statements, risk assessments, safe work procedures) for timely submission and review

Requirements

• Equipped with knowledge of NCE application
• Minimum 5 years of engineering experience and 2 years’ relevant experiences utility works
• Candidate with Register Earthwork Supervisor Certificate is preferred

• Perform onsite testing and commissioning of completed AV projects to ensure system functionality
• To be responsible in identifying defective or failed equipment and to resolve issues when arise.
• Responsible for testing of various types of cables/products before, during and after installation and rack assembly and equipment installation.
• Supporting Preventative Maintenance, Setup and Operation of audio and video systems.
• Perform system upgrades, manage issues, troubleshoot incidents, and identify root causes to ensure system reliability.
• Research, design and implement audio processing related modules. diagram for audio, video and control systems. Involved in construction of Engineering Design.
• Ensure timely and accurate completion of all required paperwork and reports.
• Provide regular updates to the Project Lead/Director on project progress and any arising challenges.
• Any other ad-hoc duties if required.
• 
  

Job Requirement:

• Minimum of 1 year of working experience in operating AV systems.
• Familiarity with AV + VC products such as Biamp, Crestron, Extron, BOSE, Barco, Poly, Cisco, Logitech, etc.
• Experience with Crestron, Extron, AMX, Biamp software, and firmware upgrades is an added advantage.
• A team player with the ability to work independently
• Training will be provided to ensure familiarity with systems, processes, and equipment.

As an Civil Engineer at Taihan Cable &Solution Co., Ltd in Singapore Branch, you will participate in the design, development, maintenance, testing, and manufacturing goods support for turnkey project’s progress cycle in Singapore.

QUALIFICATIONS

• Requires a Bachelor’s Degree in Civil Engineering.
• Requires turn-key project and transmission working experience above 3 years with relevant technologies.
• Excellent written and verbal communication skills.
• Ability to translate, statistically analyze data, and effectively report problems through written and/or graphical formats.
• Preferred knowledge of the process of cable works.
• Hands-on hardware design experience with analog and digital design solutions; including design requirements, detailed design & review, component selection & evaluation, procurement, design validation, and release.
• Experience with engineering test equipment.
• Ability to apply knowledge of installation, repair, and reinstatement at the road.
• Ability to write technical and status reports, business correspondence, and procedures.
• Demonstrated high level of accountability, responsibility, and technical competence.
• Must be task focused and have a results oriented attitude and approach to the job responsibilities.
• Demonstrated ability to work in a process driven team environment.
• Ability to use structured problem solving to define problems, collect data, establish facts, and draw valid conclusions.
• Project planning and execution.
• Broadtechnical knowledge of cabling concepts, connectivity concepts, EMC, safety.

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Create and deploy software solutions for high-speed automation systems.
• Architect, program, test, troubleshoot, and verify software applications.
• Assess and define system performance metrics and requirements.
• Software support to field service teams, update and optimize software for equipment.

Requirements

• Expertise in C/C++ programming and multi-threaded Windows development with Visual C++.
• Strong knowledge of electronic components, motion control, and interfacing with inspection systems.
• Proficient in mathematical principles and algorithm development.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Our client, a leading company in Singapore, is expanding. They value self-development, career progress and most importantly a healthy working culture. Join them in this exciting journey as an:

Application Engineer

Job description

· Handling various projects under the Service Division and technical support for projects under maintenance.

· Design Building Management System based on Technical Specifications

· Program equipment (ACMV, Electrical, Plumbing, etc.) under BMS based on the sequence of operation.

· Design and implement the graphical user interface, reports, and dashboards based on project requirements.

· Support Testing and commissioning of BMS projects

· Provide Root cause analysis for system faults/issues.

Key Requirements

• Engineering graduate, with knowledge is MS Office.
• Knowledge in MS SQL, VBA, online collaboration platforms and other programming languages is a plus.

Remuneration:

• $2,500.00 - $4,000.00 per month

Work Arrangements:

• Work Location: In person

Please submit your updated and comprehensive CV to: [email protected] for a P&C discussion. Your CV should be updated and in MS WORD FORMAT ONLY (NOT PDF) with full career details, stating current or last drawn salary with full breakdown such as base, incentives, AWS, etc. and expected salary, contact details, educational qualifications, working experiences, reasons for leaving each past employment(s) and availability date.

For quicker processing, please indicate the position applied for on the subject header. We regret to inform that only shortlisted candidates will be notified. However, if you are not selected, we will explore other positions for you, in the near future. All applications will be treated with the strictest confidence.

What our client offers

Our client offers an attractive remuneration package, a fast-paced and exciting working environment and provides challenging opportunities for career advancement. They care about their employees. They are not just an employer. They are a Team. They do not just offer you a job, they offer you a career. By joining their team, you will find a strong purpose and deep meaning in everything you do. You will have the chance to make a real difference for customers, working alongside a passionate team of like-minded colleagues, while building your knowledge/skills and developing your career in a fun, dynamic and fast-growing organization.

Our client advocates fair employment practices, recruits talents based on merit and fit with their corporate values and complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. They are committed to achieving diversity and creating an inclusive working environment. They welcome all applications irrespective of social and cultural background, race, gender, age, religious belief or nationality.

Personal Data Protection Statement for Job Applicants

Please be informed that the personal data you provided by way of your job application to Grace HR Solutions will be collected, used and disclosed by or on behalf of Grace HR Solutions to determine or investigate your suitability, eligibility or qualifications for employment with Grace HR Solutions and/or its clients and manage your application for employment with Grace HR Solutions and/or its clients including identifying you as potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Thank You!

ANDY LUCAS | CEI No: R24123824 |

Grace HR Solutions | EA Licence No: 22C1305 |

UEN: 53456396A

Company Overview

Grace HR Solutions is a boutique professional recruitment consultancy involved in the recruitment of permanent, contract, and temporary positions. We are fully committed to achieving excellence in every assignment through leveraging our vast candidate pool, industry connections, and strategic insights. As the total recruitment and staffing solutions partner, our goal is to provide our Clients the best staffing solutions through an integrated database network supported by localized content and services. We strive to be efficient and effective in matching the right candidate to the right job. Reach out to us to discover even more about how we can help you with all your staffing needs or your own career

Job Type: Full-time

Pay: $2,500.00 - $4,000.00 per month

Schedule:

• Monday to Friday

Location:

• Singapore (Preferred)

Work Location: In person

Job Description & Requirements

To do hydraulic piping job.

To do hydraulic assembly of equipment.

To do hydraulic testing.

To do hydraulic pressure testing.

To do hydraulic oil flushing.

To do hydraulic troubleshooting on hydraulic system.

To do hydraulic pumps service and repair.

To do hydraulic valves service and repair.

To do pressure and oil flow settings.

2. SKILLS

Troubleshooting

Construction

Hardware

Electrical

Piping

Compliance

Pressure

Assembly

Pumps

Electronics

Job Title: Systems Engineer for Managed IT Account Management Services

Job Responsibilities

• Administer all aspects of account management for applications, including but not limited to:
• Windows Active Directory
• Entra ID/Azure AD
• Clinical System
• Finance ERP System
• Biomedical System
• CRM System
• IRIS System
• Maintain accurate and comprehensive documentation for all access creations, modifications, and deletions.
• Develop and maintain Standard Operating Procedures (SOPs) for account management processes (e.g., onboarding, offboarding).
• Manage the User Access Matrix, ensuring its accuracy and liaising with stakeholders to validate it.
• Conduct regular User Access Matrix reviews with stakeholders.
• Adhere to SOPs for all account management procedures.
• Assist in account and access management audits by providing supporting documentation and audit log tracing.
• Perform bi-annual access reviews for various systems.
• Troubleshoot permission issues for systems and escalate to system owners when necessary.
• Handle other ad-hoc duties and IT administrative tasks as required.

Key Capabilities and Skills Required:

• Basic understanding of Microsoft Active Directory.
• Strong knowledge of user account management.
• Basic skills in troubleshooting permissions.
• Intermediate communication skills, with the ability to effectively liaise with stakeholders.
• Attention to detail and meticulous work habits.
• Availability to perform user access modifications on Sundays for staff transfer cases.

Benefits:

• Working Hours: 8 am-6 pm (6 days)
• 14 days Annual Leave after confirmation
• 14 days Medical Leave (completion of 3 months service)
• $200 medical claim per year
• Performance Bonus (Discretionary)

Job Description:

• Site project management
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operation, site coordination, monitoring and reporting work progress
• Other ad-hoc duties as assigned

Requirements:

• Bachelor’s Degree in Civil Engineering / Geology or relevant vocational certificate
• Able to speak and write in English and Chinese in order to communicate effectively with Chinese-speaking clients and associates.
• Knowledge of geotechnical engineering or soil data interpretation or Singapore Geology
• A good team player, self-driven and willing to take responsibility for assigned tasks as project engineer/manager
• Preferably Engineer specialized in Engineering / Civil / Construction / Structural or equivalent
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Title: Systems Engineer for Managed IT Server Management Services

Job Responsibilities:

• Maintain, monitor, and administer all aspects of NKF Server Infrastructure.
• Act as the point of contact for Level 2 escalation for Server Infrastructure.
• Manage all aspects of Active Directory Domain Services.
• Manage all service requests from internal customers (NKF Application Team, respective stakeholders, etc.).
• Manage all Microsoft 365 Suite applications including but not limited to:
• Microsoft Exchange Online
• Microsoft SharePoint Online
• Entra ID
• Microsoft Teams
• Manage NKF Server Virtualisation Infrastructure:
• Provisioning and decommissioning of virtual machines.
• Fine-tuning and modification of virtual machines.
• Manage DR replication.
• Manage file share services:
• Distributed File System
• Network Attached Storage (NAS)
• SFTP services
• Manage backup services:
• Daily monitoring/tracking of backup job status.
• Update daily checklist and submit for review.
• Troubleshooting of backup job errors and timely follow-up for resolution.
• Backup job configuration and modification according to backup policy.
• Perform routine restoration testing from tape and/or disk.
• Manage restoration test results and prepare Backup Restoration Reports for review.
• Manage tape rotation and weekly dispatch to offsite storage.
• Manage Print services for HQ and offsite offices.
• Manage Privileged Access Management (PAM) solution:
• Maintain overall PAM solution.
• Configure and maintain privileged secrets.
• Ensure compliance (secret rotation, heartbeat, password compliance, etc.).
• Troubleshoot and liaise with vendors as required.
• Patch management for the solution.
• Manage secret access approval workflow in conjunction with ticketing system approval.
• Patch Management for NKF Server Infrastructure:
• Maintain patch schedule and inform respective stakeholders.
• Execute monthly/quarterly patches during non-operation hours.
• Ensure patches are tested in UAT/DEV environments before staging to production.
• Maintain OS security patches, firmware, and third-party software patches.
• Maintain server inventory list and software inventory list.
• Maintain proper documentation of all services related to server infrastructure.
• Manage OS-level firewall/micro-segmentation solutions.
• Manage anti-malware solution for server infrastructure.
• Manage vulnerability mitigations for server infrastructure.
• Assist NKF IT Security team in incident investigations and ensure proper resolution.
• Assist in managing all NKF Cloud Infrastructure.
• Update management monthly report on server infrastructure statistics.
• Provide support for NKF IT Projects.
• Act as a cover for Managed IT Account Management duties.
• Provide remote session support for external vendors where required.
• Manage and execute annual Disaster Recovery exercises.
• Manage Business Continuity Plan components and procedures.
• Assist in all IT audits.
• Conduct yearly/bi-yearly access reviews for all systems.
• Perform other ad-hoc duties and IT administrative tasks.

IT Server Management Team Requirements:

• Intermediate level knowledge in managing Microsoft Active Directory Services.
• Intermediate troubleshooting/root cause analysis skills.
• Intermediate communication skills, willingness to approach respective stakeholders.
• Intermediate knowledge in managing backup solutions.
• Basic knowledge of DR and BCP.
• Must be meticulous in their work.
• Required to provide ad-hoc support after office hours (man-day rate basis).
• Minimum 1 year of experience in managing Microsoft 365 Suite.
• Minimum 1 year of experience in managing server virtualisation solutions.

Statement Of Purpose (Overall Purpose of Job)

In charge of the execution of all Solar Installation works inclusive of planning, scheduling, controlling, coordination and ensure works carried out are in accordance to approved shop drawings / specification and complete within the completion date. In addition, budget control and contract administration.
Major Duties & Responsibilities
(A) Specific :

• Evaluate costing received for electrical works.
• Vet through shop drawings to ensure all are in compliance to technical specifications / authority requirements prior to submission.
• Liaise and have meetings with Clients and Consultants on technical resolution / clarification, inspection and submission.
• To be the lead contact point for all Project issues.
• To attend weekly site meeting.
• To build and maintain strong, long-lasting client relationship and meet Client’s expectations.
• To manage, coordinate, work and oversee all workers, sub-contractors and vendors to ensure proper work execution and good workmanship.
• To plan, implement, track the work progress and submit weekly progress report so as to ensure that the project executed is on time and within budget.
• To monitor project cost including variation works and submission of supporting documents.

(B) General :

• To prepare and submit progress reports.
• To maintain proper documentation for all projects.
• To coordinate and work with other departments.
• To engage, coordinate and oversee all project works to ensure successful completion and handing over to Clients.
• Other duties as assigned.

(C) Safety:

• To follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• Degree or Diploma in Electrical Engineering or Equivalent.

(B) Knowledge & Skills :

• Well-versed with installation of M&E services and builder’s works.
• Experience in Design and Delivery Execution of Solar System Works and Load Sizing Of Solar Systems.
• Good interpersonal skills.
• Independent & Team player.
• Proactive and able to take initiative.
• Good in negotiation.
• Good communication skills (verbal and written).
• PC literate and knowledge in MS Office.

(C) Experience :

• Minimum 3 years of relevant experiences.

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Design and build data pipelines infrastructure to collect, process and store data from various sources.
• Develop data assets platform to provide a centralized repository for managing and accessing data assets.
• Implement automated SQL queries based on user-defined criteria or business requirements.
• Use techniques like query templates, metadata-driven generation, or machine learning algorithms to generate SQL queries.
• Create new IPs in Singapore in area of expertise.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development.

Requirements:

• Degree / Masters / PhD in Computer Science, Data Science, Statistics Applied Sciences or related field.
• Proficiency in Python, SQL, Java or Scala programming languages.
• Understand data warehousing concepts, ETL (Extract, Transform, Load) processes and tools like Informatica, Talend, or Airflow.
• Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra).
• Familiar with Apache Airflow, Kubernetes or Ansible for automating data pipelines and infrastructure.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

• Role and Responsibilities

1. Responsible for all aspects related to Access Control System during project deployment from system designs, installation and commissioning
2. Manage day-to-day operations of the project team, plan and deploy available resources effectively to ensure the projects are running smoothly on time.
3. Monitor site progress and make necessary arrangement.
4. Check and summit updated drawing accordingly.
5. Monitor the operations of project, technically and commercially.
6. Attend meetings and briefings by customer
7. Properly handover to customer completed project
8. Brief internal Service and Maintenance Team upon handover of completed projects
9. Deliver projects according to schedule, client satisfaction and installation standards.
10. Update and Reporting to the Project Manager and responsible for work completed documentation and follow up on quotations.
11. Co-ordinate with customer, contractor, and work closely with internal departments to ensure projects are completed on schedule.
12. Supervise and monitor progress of works on site

• Requirements
   1.Diploma in Professional Certificate/ NiTEC, Diploma, Engineering (Mechanical), Engineering(Others) or equivalent
   2.Good IT background knowledge
   3.Knowledge of AutoCAD drawing for basic setup
   4.Having PA & CCTV knowledge will be an advantage (Security / Communication Field).
   5.Possess good interpersonal skills and ability to handle pressure.
   5.Able to travel overseas whenever required.

Benefits:
 1. BONUS + ALLOWANCES BASED ON PERFORMANCE
 2. Annual Leave
 3. Marriage Leave
 4. Childcare / Parental leave
 5. Medical Claims
 6. Cell phone reimbursement
 7. Employee discount
 8. Travel allowance provided
9. Professional development