• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

As an Manufacturing Central Team Assembly and Test Automation Project Engineer Automation Project Engineer, you are member of the Global Operations Team responsible for the worldwide portfolio of Automation projects aligned to Assembly and Test Operations objectives and corporate strategies and initiatives. You will develop, facilitate, and/or lead data-driven program management capabilities during Initiation, planning, and execution phases. You will identify risks early, manage issues, and drive initiatives to closure.

Job Responsibilities

• Collaborate with network teams - site automation, central/ site Process and Equipment Engineering, procurement, safety EHS in managing the automation projects
• Identify Project partners and manage expectations
• Identify and manage program projects dependencies
• Collect and document partner requirements
• Identify and resolve issues and conflicts
• Control project scope
• Communicate project expectations to team members and partners
• Coach, mentor, motivate, supervise, and provide recognition for projects
• Maintain project support through interaction with senior leaders
• Promote Program Management value and business practices to the organization
• Develop and deliver progress reports, proposals, requirements documentation, and presentations
• Identify potential crises, and develop and implement resolution plans
• Facilitate transition of system and business processes from project closure to long term sustainment
• Follows Company/Department Policies and Group expectations.
• Maintains a clean and safe working environment by proactively assessing the work (and surrounding) area and submitting work orders as needed.
• Recognizes and reacts to safety alarms (EES, fire alarm, MDA, etc.)
  Remains within Micron’s attendance policy.
• Displays a positive attitude toward Micron and its policies
  Holds self and other team members accountable for adherence to all company-wide safety procedures (PPE, EIPS).
• Observe all established EHS policies, requirements, and procedures.
• Understand and follow EHS guidelines included in work instructions.

Requirements:

- Bachelor's in Engineering or Science in fields such as mechanical, electrical, industrial, computer or automation.

- Minimum 3 years working experience in engineering semiconductor project management field

- Strong verbal and written communication skills

- Capability to lead teams and manage project team members

- Project Management Certifications are preferred

- Knowledge in automation, semiconductor process and systems are beneficial

- Experiences in supporting and leading global teams/projects

Under administrative supervision of the Technology, this position is responsible for the deployment and maintenance of a cloud-based applications infrastructure.

Responsible for deploying, automating, maintaining, troubleshooting and improving the systems that keep the backend infrastructure running smoothly. The role requires you to have hands-on technical experience and a can-do approach towards environment automation / management and continuous improvement.

Job Duties:

• Deploying, automating, maintaining, and managing AWS cloud-based production system, to ensure the availability, performance, scalability and security of productions systems.
• Build, release, and configuration management of production systems.
• Pre-production Acceptance Testing to help assure the quality of our products / services.
• System troubleshooting and problem solving across platform and application domains.
• Suggesting architecture improvements, recommending process improvements.
• Ensuring critical system security using best in class cloud security solutions.
• Evaluate new technology options and vendor products.

Skills and Requirements:

• Bachelor’s degree in computer science or other equivalent technical discipline.
• 1+ years’ experience with using a broad range of AWS technologies (e.g., EC2, RDS, ELB, EBD, S3, VPC, Glacier, IAM, CloudWatch, KMS) to develop and maintain an Amazon AWS based cloud solution, with an emphasis on best practice cloud security
• AWS Certified Solution Architect (Associate) is preferred.
• Conversant with infrastructure definition tools such as Cloud Formation and Terraform
• Experience as a DevOps Engineer in a 24x7 uptime Amazon AWS environment, including automation experience with configuration management tools.
• Scripting Skills: Strong scripting and automation skills.
• Operating Systems: Windows and Linux system administration.
• Monitoring Tools: Experience with system monitoring tools.
• Problem Solving: Ability to analyze and resolve complex infrastructure resource and application deployment issues.
• Experience with other Clouds such as Azure or GCP can be considered.

Note: Proceeding to apply on this job post means you have read, understand and agreed to WPH DATA PROTECTION NOTICE FOR JOB APPLICANTS in the link below.

https://www.wphdigital.com/notices

Our esteemed client, an established MNC, is searching for a QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: 5-day work week
• Working Hours: 8:15 am to 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

Do you want to work for a leading marine contractor in technically challenging offshore projects from our Singapore Office?

At Heerema Marine Contractors, we do something new every day. We operate the world’s largest crane vessels and with them we transport, install and remove structures for the offshore energy markets. Our projects range from installing wind turbines, removing retired offshore oil and gas platforms to installing platforms amongst the largest in the world. You can find our headquarters in Leiden (the Netherlands), and there are offices in Houston, London, and Singapore while our vessels work globally. By joining us, you will play an important part in our unique maritime adventure.

As a (Jr.) Structural Engineer you provide designs and analysis for product development, study, tender and commercial T&I projects.

You will have the opportunity to go offshore on our vessels and see your designs and work in action, supporting our fleet with anything that requires a bright technical mind and pro-active attitude.

Daily activities

Your tasks and responsibilities include the following:

• Perform concept and detailed design of offshore lifting arrangements and steel structures, such as lifting appliances, lift points, lift arrangements and grillage and seafastening.
• Perform structural calculations and prepare technical design reports.
• Review structural deliverables (construction reports and drawings).
• Perform quality control on deliverables prepared by colleagues.
• Contribute to a continuously improving and learning organization by i.e. actively sharing knowledge and experience and identifying and providing follow up subjects for improvement.

Who will you work with?

The (Jr.) Structural Engineer is member of the Technology Department. You will work in a team with other engineers in various disciplines and actively liaise with colleagues in other departments and offices, like procurement, fabrication, and operations.

Is this the job for you?

You are a team player who organizes and plans the work and the involvement of others effectively and efficiently. You are quality and result oriented and have the ability to adapt easily when needed. Next to this you take the different interests of different divisions of the organization and mutual relations into account. You recognize the effects and results of your own decisions or activities on other parts of the organization.

Furthermore, you have:

• A Bachelor or Masters degree in Offshore Engineering, Civil Engineering, Mechanical Engineeringor Similar.
• Fluent in English (spoken and written)
• Affinity with structural engineering, project preparation and execution of offshore projects.
• Excellent analytical, practical and pragmatic skills.
• The ambition to work (temporarily) offshore on our vessels, overseas or in our other offices.

Working at Heerema Marine Contractors

Making the impossible possible offshore, this is what drives us at Heerema! To execute our offshore projects we must innovate, engineer and develop to find solutions for our clients’ challenges. Working with Heerema means working in an international, informal, and friendly environment where you will meet likeminded and passionate colleagues.

What we offer

• Excellent secondary labor conditions, such as health insurance, a bonus payment, overtime payment, business trip-, yard-, and offshore allowances.
• Starting at 18 working days and increasing to 25 days of annual leave.
• Ample opportunities for personal and professional development.
• Opportunities to develop your initiatives within a team.
• An informal working environment with international colleagues.
• A centrally located office with a good accessibility and parking.

· 5 days’ work week

· Central area near MRT

· Reputable and stable organization

Job Responsibilities:

· Provide pre-sales and post-sales technical support to customers and internal sales team, handling customer NDA and sample request

· Collect customers’ feedback and provide recommendation to customer for design requirements, product enhancements and capture new product opportunities

· Responsible for identifying and clarifying any technical issues related to new or existing products, and clearly communicate findings to the respective business unit

· Hands-on technical support to customers, documenting problems, and suggesting solutions

· Report design, reliability and functional problems to the appropriate groups within company & associate groups and work to solve problems

Requirements:

· Degree in Engineering (Electronics) or equivalent

· 5 years of technical customer support experience in semiconductor industry

· Field experience or hands-on practice or knowledge of multi-disciplinary system design and development

· Knowledge of Smart Card, RFID and microcontroller products; knowledge of physical access control and the security industry is desirable

· Experience with or knowledge of one or more of: CCD, CMOS image sensors, image capture, video standards, image processing

We would like to invite interested applicants to apply.

Thomas Tan

Registration No: 12C6253

License No: R2094900

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

Responsibilities

• To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples
• To liaise and work with relevant authorities, sub-contractors or clients on shop drawings, materials and samples
• Review and align electrical design drawings to ensure compliance with design specifications and guidelines
• Knowledge in M&E and able to identify discrepancies between M&E, structural, ID, architectural and client provisions
• Manage and execute project as per the deadline
• Attend meeting with contractors to address issues and update progress
• Study and review drawings, specifications for compliance
• Allocate work and ensure jobs are correctly and properly achieved within standards and SOP
• Submit Variation Works costing, taking BQ and understand contract specifications

Requirements:

• Bachelor’s degree or Diploma in Electrical Engineering or related disciplines
• At least 5 to 8 years of relevant experience as QS
• Good knowledge of M&E specifications & requirements
• Able to take BQ, submit Variation Works, understand contract requirements
• Candidate with more than 8 years of relevant experience will be considered for Senior position

• Managing the day-to-day planning and engineering initiatives for the project
• Responsible for project functions; e.g. Site Management, Project Control Management, Engineering Management, Procurement, Construction Management, etc.
• Supervise and prepare methods for the project and any installation procedures, task plans and guidance
• Monitor site progress against budget and forecast schedule
• Ensure EHS and QA/QC standards of works by trade cons are met
• Ensure accurate and timely reporting of works progress to Senior Manager
• Identify and notify Senior Manager and Executive Manager (PMO) of any additional works or changes that constitute a variation
• Always ensure coordination and communication with all trade cons
• Prepare meeting minutes for project meeting
• Manage project closeout and obtain all warranties for final acceptance
• Support tender processes

Job Description & Requirements

Roles & Responsibilities

Responsibilities:

• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programme.
• Liaise with Professional Engineer on the Temporary works.
• Liaise with consultants for technical issues and coordinate the site activities with subcontractors.
• Handing of technical and engineering problems.
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time.
• Prepare report and method statement whenever necessary.
• Manage and control workers and monitor their work closely to keep site safer and neat.
• Supervise ongoing site activities closely.
• Other ad-hoc assigned by the Company.
• Good attitude and relevant working experience.

Requirements:

• Recognised Certificate in the relevant field subject.
• Min. 3yrs experience in the construction site.
• Independent with good communication skill.
• Good organizational and planning skills.
• Effective communication and coordination skills and team work.
• Able to work independently and in a team.
• Bilingual in English & Mandarin in order to communicate with Chinese speaking counterparts.

Job Description and Qualifications for a Engineer in the Petrochemical Industry

A Engineer in the petrochemical industry at Jurong Island plays a crucial role in overseeing engineering activities at the site. Here is a job description and qualifications typically required for this role:

Job Description:

1. Technical Oversight: Provide technical expertise and support, resolve drawing discrepancies & technical difficulties with technical team and ensure preparation of detailed method statements and work instructions for scheduled job are done. Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.

2. Project Management: Manage engineering projects, including planning, scheduling, and budgeting to ensure projects are completed on time and within budget.

3. Safety Compliance: Ensure strict adherence to safety regulations and protocols of the job site to maintain a safe working environment.

4. Quality Control: Oversee quality control procedures to maintain high standards of construction and operation.

5. Team Collaboration: Work closely with multidisciplinary teams, including chemical engineers, mechanical engineers, and technicians. Coordinates between sub-contractors/vendors/stakeholders and monitor site manpower / material / equipment demands to meet schedules. Liaise with the owners and consultants on the submission related to structural works, project, maintenance works, electrical works and Technical Department.

6. Problem Solving: Identify and troubleshoot engineering issues, offering effective solutions.

7. Documentation: Prepare technical reports, documentation, and progress reports.

8. Supervision: Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.

• Full time supervision at site
• Able to communicate and team work
• Other Ad-Hoc related duties assigned by the company

Qualifications:

1. Education: A Bachelor's Degree in Engineering or a related field is typically required

2. Experience: 10 years of experience as a Engineer or similar job role in the electrical Engineering industry or Mechanical cum steel structural work and maintenace works.

3. Technical Skills: Technical expertise and knowledge in mechanical cum steel structural works , electrical , maintenance works , M& E engineering. Proficient in Microsoft Project and Good knowledge on method statements, Autocads drawing –piping isometric and etc

4. Communication Skills: Effective communication and teamwork are crucial for collaborating with various teams and stakeholders.

5. Project Management: Project management skills are valuable for overseeing engineering projects effectively.

6. Safety Awareness: A strong commitment to safety and the ability to ensure compliance with safety standards is essential.

• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team / department.
• Ensuring that the site works are completed with high quality standards and adhering to safety requirements throughout the project or maintenance works.

Work Location: Tampines

Work Hours: Monday to Friday (7am to 3pm/ 3pm to 11pm)

Responsibilities

· Assist engineer to carry out all the Test related activities

· To support & implement different product configuration setup

· To test, analyze and perform troubleshooting on product failures and work closely with process and test engineers on yield improvement

· Participate in the Kaizen activities

· To update test tracking records

· To prepare and update Working Instruction

· To provide training over W/I to New Hiring

· To support the NPI Process and production runs

· Participate in ISO activities (implementation & maintain)

Requirements

· Nitec & above qualification in engineering with at least 1-3 years of working experience in testing and debug environment

· Good team player

· Ability to work with Peers, engineers, and superiors

· Able to multi-task & work under pressure

· Perform shift work

· Good understanding of test methods and concepts

· Knowledge of programming and debugging skills

For quick reply, please contact me at +65 85878287

Registration Number: R21100938 (Tan Jie Bei)

EA Licence No: 22C1301 (Unisearch Services Pte Ltd)

Job Overview

Candidate will be responsible for improving yield and device performance of automotive chips during production ramp, and high-volume manufacturing.

• Analyze yield, process, diagnostic, and semiconductor test data to ramp production volume, support lot disposition, drive baseline yield improvement, and isolate root causes of yield loss and product performance degradation.
• Support foundry / assembly house on process qualification, test house management, test probe card, load board and tester validation on performance over process and operating condition, debug and release test program into mass production.
• Collaborate with wafer foundries, assembly and test houses and Qualcomm PTE (product and test engineering) team to isolate root causes of yield loss and drive improvements.
• Interface with management and business teams to provide yield outlook for product planning and cost analysis.
• Lead teams and task forces to address and drive resolution of yield excursions.

Minimum Qualifications

- 3+ years experience with ATE test platforms, especial familiarity with Advantest 93K.
- Good understanding of VLSI test techniques.
- Basic understanding of digital/analog functional block and electronic circuits.
- Basic data analysis skills.
- Fluent in English, both spoken and written.
- Proactive working attitude.
- Capable to handle new challenge.

Preferred Qualifications

- Basic knowledge of design for test, design for manufacturing, design for experiment.
- Basic knowledge of reliability test, and quality concept.
- Basic knowledge of foundry process, assembly process, and failure analysis.
- Good experience with yield management software (O+ or exensio)
- Understand yield management, continuous improvement and cost reduction in a high volume fabless semiconductor environment
- Understand test house working model, supply chain and KPI.

- automotive related experience is preferred

Work Location: 6 Tampines Industrial Avenue 5 Singapore 528760
Work Day : Monday - Friday, 8.30am - 5.30pm

Responsibilities:

• To lead a team of Engineers to carry out all the Test related activities for Server & Rack products for the production
• To support & implement PXE Server configuration for the products
• Perform & maintain the Server & Rack run-in test process
• Perform & maintain the burn-in & power test process
• To liaise with customer & HQ / factory on the test program implementation and maintenance
• To test and analyze all failures in the production products and work back with customer & HQ / factory for improvement
• Participate in the Kaizen activities
• To update the test program master list & tracking
• To prepare and update Working Instruction
• To provide training over W/I to production
• To support the NPI Process
• To support production on the mass run
• Participate in ISO activities (implementation & maintenance)

Requirements:-

• Min. Diploma in Engineering discipline with min 3 years relevant experience in Server / Rack/ Manufacturing environment
• Ability to work with the customer, HQ / factory, Peers / Subordinate and Superiors
• SAP & Linux knowledge
• Able to multi-task & work under pressure
• Good understanding of test methods and concepts
• Knowledge of programming and debugging skills

Compliance with RBA standards

About the Role:

We are seeking a motivated and detail-oriented Junior Test Engineer to join our team. In this role, you will be responsible for ensuring the quality and reliability of our operations system through testing and continuous improvement. If you are passionate about quality assurance, have an eye for detail, and are eager to grow in the field of software testing, we would love to hear from you!

Objectives of this Role:

1. Ensure the highest quality of our operations system by developing and executing tests to detect and report any errors in the product.

2. Develop suitable testing plans and frameworks that align with our customers' needs.

3. Coordinate with various functions and teams to incorporate necessary product changes.

Responsibilities:

1. The role involves writing test cases, preparing and creating test data, executing and retesting test cases.

2. Able to leveraging on inhouse GenAI for test case creation and enrichment

3. Ensure test runs and results are completed within the given time frame.

4. Develop and execute test plans to validate software functionality against requirements and specifications.

5. Identify, report, and track software defects and issues.

6. Perform functional, performance, security, and regression testing of software products.

7. Report test results and defects to the development team and other stakeholders, and work on their resolution.

8. Provide suggestions and feedback to improve the quality of the software development process across teams.

9. Stay updated with the latest testing tools, techniques, and methodologies.

10. You will work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations

Required Skills and Qualifications:

1. Degree or diploma in computer science, engineering, or similar technical certifications.

2. At least 1-3 years of experience in testing, quality assurance, or similar roles in the banking industry is non nego

3. Excellent problem-solving skills, an analytical mindset, and strong communication skills.

Preferred Skills and Qualifications:

1. Proficiency in testing tools such as JIRA, Selenium, Appium, and other testing frameworks.

2. Certifications such as ISTQB (International Software Testing Qualifications Board) and CSTE (Certified Software Tester).

Internal ref: 9278

Regards,

Lini

Recruitment Consultant

R22108463

Responsibilities:
1. The role involves writing test cases, preparing and creating test data, executing and retesting test cases.
2. Able to leveraging on inhouse GenAI for test case creation and enrichment
3. Ensure test runs and results are completed within the given time frame.
4. Develop and execute test plans to validate software functionality against requirements and specifications.
5. Identify, report, and track software defects and issues.
6. Perform functional, performance, security, and regression testing of software products.
7. Report test results and defects to the development team and other stakeholders, and work on their resolution.
8. Provide suggestions and feedback to improve the quality of the software development process across teams.
9. Stay updated with the latest testing tools, techniques, and methodologies.
10. You will work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

• Apply assembly of mechanical machines.
• Carry out advanced spreadsheet functions.
• Carry out engineering simulation to verify design.
• Carry out inspection of protective coating.
• Carry out the process of mixing materials.
• Decide heat transfer loads for processing equipment.
• Define the measurements of the design and its allowance.
• Oversee manufacturing work for Workplace Safety and Health (WSH).
• Plan and build the industrial machine electrical system.
• Plan mechanism unit of machine.
• Use automation control for machines.
• Use laser machine technology.
• Use materials characterisation.
• Use measurement metrology in quality assurance.
• Use mechanical fixtures design.
• Use polymer materials technology.
• Use precision machining.
• Use root cause analysis.
• Use sensors and actuators in automation.
• Use vibration design and control for precision engineering.

Responsibilities: -

• Create and execute test plan among several systems.
• Stakeholder management during creation and executive of test plan
• Prepare and present regular project reports and documentations.
• Ensure project status and progress are communicated to stakeholders and IT teams in a timely and concise manner.
• Assume agreed projects that may be assigned from time to time in tandem with business priorities/requirements.

Requirements:

• Bachelor’s degree in information technology, Computer Science or equivalent
• Min. 5 years’ experience in supporting IT Project test phase in the banking sector.
• Experience in leading creation for test plan and test definition for Bank IT system.
• Coordination with other system personnel.
• Provide timely escalation and resolution of significant issues to Management.
• Act as test manager and understand business requirements for Core Banking System and Fund Transfer for transaction of Bank systems, other related bank systems
• Knowledge in software test methodology, to creation test plan, lead test document creation, lead test execution,
• create test result analysis, software quality management.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY Singapore PTE LTD)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

The Opportunity

• Adecco is partnering with a leading bank to look for a Test Analysts
• Focus: Responsible for end to end execution of the overall test strategy developed collectively with the product owner from user story acceptance criteria, JBehave writing, execution of testing and defects management to live verification support.
• Starts off as a 6 months contract
• Location: East

The Talent

• Minimum 1 years’ experience in web and mobile application testing in the banking industry isrequired
• Strong analytic skills to process complex requirement to come up with end to end scenarios and test cases
• Familiar with Agile and waterfall methodology, and understand the life cycle of testing in both automated and manual testing
• Have experience in running or being part of an agile project team in banking industry and have had hands on experience on JBehave
• Understanding Java and VB Scripting will be an advantage, for automation QA role hands on usual of selenium or Appium is a must for consideration
• Experience with Quality assurance processes and JIRA is a must
• Good stakeholder engagement skills with strong verbal and written communication is required as will need to collaborate closely across multiple teams during project execution
• Good team player with strong organizational skills and can work independently with minimum guidance

The Job

• Design, develop, execute, and maintain test scenarios and detailed end to end test cases for the assigned projects relating to the digital platform’s user acceptance testing.
• Able to write test cases in JBehave for agile projects.
• Expert in using testing tools such as JIRA, Confluence etc to execute and maintain project status.
• Knowledge of web and mobile application testing in banking domain, with good time management and keen eye for details to ensure quality and timely output
• Detect, report and track defects in the application tools and with various stakeholders to ensure proper closure of issues.
• Collaborate with all stakeholders proactive to complete job assigned from clarification to issue closure.
• Good with documentation as constant update to project changes will need to be updated timely

Next Step

• Kindly send your resume to [email protected] with the header 'Apply Test Analyst'

BIOTRONIK is a leading Medical Device company dedicated to revolutionizing patient care through innovative medical device software solutions. With a commitment to cutting-edge technology and a passion for improving healthcare outcomes, we are at the forefront of transforming the industry.

We are seeking a skilled and motivated Cloud Test Engineer to join our team. In this role, you will play a crucial part in ensuring the quality and reliability of our cloud-based software solutions for medical devices product.

If you are passionate about leveraging cloud technology to make a positive impact on medical device product, we want to hear from you.

Your Responsibilities

• Develop and execute test plans, test cases, and test scripts for Cloud-based software solutions, ensuring thorough testing coverage.
• Collaborate with cross-functional teams, including software developers, product managers, and quality assurance professionals, to identify and address software defects.
• Design, implement, and maintain automated testing frameworks for cloud-based applications to enhance testing efficiency and scalability.
• Conduct performance testing, load testing, and stress testing of Cloud-based software systems to ensure optimal performance under various conditions.
• Work closely with regulatory affairs and compliance teams to ensure testing proceccess align with industry standards and regulations.

Your Profile

• Bachelor’s Degree in Computer Science, Software Engineering, or a related field; advanced degree preferred.
• Proven experience as a Test Engineer is preferable.
• Experience with automated testing frameworks such as Selenium, Junit and Gherkin.
• Familiarity with cloud platforms such as AWS, Azure, or Google Cloud Platform.
• Strong analytical skills and attention to detail.
• Excellent communication skills and the ability to collaborate effectively in a team environment.
• Prior experience from the healthcare or medical device industry would be an added advantage.

What we offer

• being encouraged to think and act entrepreneurially
• working in global teams and projects
• developing yourself professionally

Job Responsibilities:

Test Planning and Strategy

• Lead the development of comprehensive test strategies and plans in collaboration with stakeholders.
• Define test objectives, criteria, and priorities based on software requirements and business goals.
• Ensure alignment of testing efforts with project timelines.

Test Execution

• Execute hands-on testing, including manual and automated testing, to verify software functionality, performance, and security.
• Conduct rigorous regression testing, exploratory testing, and user acceptance testing (UAT).
• Review and approve test cases and test scripts for accuracy and coverage.

Test Automation

• Develop and maintain automated test scripts using industry-standard tools and frameworks.
• Champion test automation best practices and contribute to the growth of automation coverage.
• Continuously improve the test automation infrastructure for efficiency and scalability.

Defect Management

• Establish and maintain a defect-tracking system.
• Ensure defects are documented, prioritized, and resolved in a timely manner.
• Communicate defects and testing progress to stakeholders.

Collaboration and Communication

• Collaborate closely with software developers, product managers, and other stakeholders to resolve issues and improve product quality.
• Communicate testing status, results, and recommendations to senior management.

Test Documentation

• Create and maintain test documentation, including test plans, test cases, and test reports.
• Ensure that testing documentation is up-to-date and accessible to the team.

Job Requirements:

• Proven experience as a Software Test Engineer, with a focus on automation and leadership.
• Strong knowledge of software testing methodologies, tools, and best practices.
• Proficiency in programming/scripting languages (e.g., Typescript, Svelte, Golang).
• Extensive experience with test automation tools and frameworks (e.g., Playwright, Testify, Selenium).
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills.
• ISTQB or similar certification is a plus.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Responsibilities:

• Preparing the test environment, designing, and developing the test cases.
• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.
• Develop design documents and user manuals which would effectively describe and provide clear instructions on the test automation solution to the end users who include testers and stakeholders.
• Conducting test reviews with internal and external stakeholders and Perform root cause analysis for production and user acceptance defects, address test gaps to ensure test efficiency.

Requirements:

• Degree or equivalent qualification in Information Technology or Engineering
• 3+ years’ experience in Test Automation for devices (UI/embedded) or back-office systems, covering the full system development lifecycle.
• Experience with Micro-payments/Automatic Fare Collection systems (Smart Cards) and various test phases (System Integration, User Acceptance, Performance Testing) is a plus.
• Software testing certification preferred.

Apply, please kindly email your updated resume to [email protected].

Only shortlisted applicants will be notified.
APBA TG Human Resource Pte Ltd (14C7275) || Akshya R (R24122440)

Job Description

Perform mechnical & piping design review, technical agreement review and other engineering related matters for new building and conversion projects

Job Requirements or Responsibilities

• To support project in addresings engineering issues involving designers and classifications.
• To perform TA review in accordance with the contractual requirement and review schedule.
• To conduct an integration meeting involving pertinent parties for the purpose of design integration.
• To scrutinize all drawings received from supplier and designers, and provide comment as per contractual requirements, rules & regulations and operational practice

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

- Excellent written and oral communication skills in both English and Mandarin.

We regret that only the shortlisted candidates will be notified

Job Responsibilities :

- To develop and maintain business strategies by achieving sales target and increased market shares.

- Visits customer to drive sales pitch and product presentations

- Responsible for achieving sales revenue and profit target

- Align and link business strategies set by company

- Build strong relationship with existing and new customers

- Provide sales and after-sales support, in coordination with our internal departments and customers

- Prepare sales quotations for customer.

- Follow up with after sales issues.

- Market studies and feedback to sales manager

- Monitors sales quotation status and forecast.

- Performs order screening and preparation for clean order processing

- Ensures proper documentation of all sales quotations in line with the ISO standards and processes.

- Participate in any ad-hoc projects as assigned by management and or sales manager from time to time

Job Requirements :

- Diploma / Degree in Engineering

- 3 years of relevant experience

- Experience in Process Instrumentation / Automation Industry

- Experience with MRO Sales an added advantage

- Independent and Team player

- Excellent communication and interpersonal skills

Familiar with CRM and ERPLN

Key Responsibilities

• Lead AM materials development, manage projects involving multiple stakeholders. Use materials-process-performance research methods to investigate, solve, and deliver project objectives.
• Lead metal AM application and parts development projects including parts selection, design, prototyping and manufacturing
• Operation of metal AM machines and auxiliary equipment, including maintenance troubleshooting, and risk assessment
• Execute customer projects using AM materials and applications knowledge, to meet project deliverables and deadlines. Support in FEM simulation for DfAM.
• Provide technical support for addressing technical inquiries related to the development process, quality assurance, and analytical problems.
• Produce technical reports and presentations for AM project development

Job Requirements

• Masters/PhD in Engineering, Mechanical/Materials or equivalent
• 5-7 years of working experience with AM materials-process-performance characterization and analytical tools.
• Experience in LMD and/or L-PBF machine operations
• Proficient in 3D modelling and 2D drawing using Solidworks
• Experience in CAM and Siemens NX
• Experience in FEA/FEM
• Strong understanding of LMD process and materials, key process variables.
• Experience with parameters development, material characterization methods
• Experience with LMD machine operation
• Proficient in statistical tools like DOE
• Familiar with metal AM process chain
• Able to work independently and self-motivated