• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and coworkers about analysis results
• Ability to supervise technicians
• Focus and concentration to understand complex electrical systems
• Using industry-specific tools to analyze and test electronics
• Time-management skills for meeting deadlines
• To Project Management Coordinate with main-con &consultant for drawing submission, meeting with main-con and consultant
• Focus and concentration to understand complex electrical systems
• Self-motivation to keep up with current electrical advances using new technologies
• Ability to supervise technicians
• Prepare Electrical shop & As-buits SLD RCP drawing
• LV &HV CABLE SIZING CALCULATION &PREPARE BILL OF MATERIAL
• select appropriate electrical materials to complete designs such as MSB, DISTRIBUTION LIGHTING FIXTURES, CABLE TRAY LAYOUT,LIGHTING &RECEPTABLE LAY OUT, SINGLE LINE DIAGRAM,ELV system

Primary Roles & Responsibilities

•  The patching cabling between network equipment and client’s network
•  The installation of power cables from equipment to power supply in rack/cabinet/closet
•  The installation, troubleshooting and de-installing IT equipment (Servers / Network / Storage / etc) Install/swap out devices (e.g., phone, computers, cables, boards, edge routers, switches and etc.)
•  Complete all hard and complex Move, Add Change (MAC) requests within the defined service levels
•  Act as interface between client’s associates and management
•  Provide hardware break-fix services for network infrastructure
•  Perform onsite call-through, data, voice, website and security testing
•  Perform back-up testing to ensure all systems are connected to the client’s network as directed
•  Support carrier testing of circuits
•  Assist with facilities efforts such as vendor co-ordination and vendor supervision - Power and uninterruptable
• power supply (UPS) restoral - Water problems, - Emergency cooling restoration, - Fire suppression exercises,
• restoration, and post fire events
•  Support inventory management activities - Receiving inventory, - Tagging of assets, - Tracking spares (crash
• kits), - Ordering inventory, - Updating inventory records, - Prepare and return damaged equipment
•  Act as an interface, as needed, between associates at the applicable location and centralized project / operations / MAC management

Requirements:

•  Must be proficient in utilizing technical tools such as BERT testers, cable testers, and fiber testers.
•  Requires experience in working in communications closets
•  Must be able to perform rack and stack activities
•  Must be able to safely lift heavy objects
•  Must understand cable patching processes and procedures in copper and fiber
•  Experience in either or both CommScope and Corning structured cables (copper and fiber)
•  Must have a basic knowledge of data communications networking.
•  Must be able to assist in troubleshooting issues
•  Must understand network terminology
•  Requires good interpersonal communications skills
•  Must be able to explain technical issues in a way the client will understand an issue
•  Must be able to interpret a client’s issue in a way that will allow technician to facilitate a resolution

Education/Experience Requirements :

•  5+ years of experience in Data Centre operations and environment
•  Must have a basic knowledge of local and wide area networking.
•  High school Diploma or equivalent required

EA License no: 96C4864

Reg No: R23115903

A construction engineer is a civil engineer who oversees the design and construction of large building projects and works closely with architects and structural engineers to interpret building design plans and ensure that the project meets certain safety requirements.

A construction engineer is a civil engineer who oversees the design and construction of large building projects and works closely with architects and structural engineers to interpret building design plans and ensure that the project meets certain safety requirements. While they don't have direct involvement in the construction process, they're still responsible for ensuring that the process adheres to the proper construction standards and specifications. They manage multiple aspects of a construction project, including its budget and risk management processes. The infrastructure projects construction engineers assist with might include commercial or residential properties, roads, dams, bridges and airport runways.Related: What Is Construction Engineering?

What does a construction engineer do?

A construction engineer assists with construction projects to ensure that teams build in accordance with the proper plans and specifications. They also help maintain and repair infrastructure systems, such as roads, dams, water supply systems and buildings. They work with engineers and construction crews to organize and complete projects. Some of their additional responsibilities might include:

• Developing construction project budgets, ordering materials and collecting and organizing resources and personnel, including structural engineering employees, tools, machines and physical materials
• Operating machinery and using tools to design complex structures like hydraulic systems and using computer software to plan and design projects and conduct risk analyses
• Overseeing building progress and enforcing safety regulations at construction sites and submitting building permits to the proper authorities
• Assessing the viability and potential risks associated with a construction project

About the Role:

We are seeking a highly skilled and experienced Instrumentation and Control Systems Engineer to join our team. This is a full-time position based at our customer's site, requiring a strong understanding of control systems and proven troubleshooting abilities.

Responsibilities:

• Handle and maintain control-related systems, including PLC instrumentation, LSS, FAS, and SCADA LoT.
• Perform effective troubleshooting of control system issues.
• Contribute to system improvements and optimization.

Qualifications:

• Minimum 3 years of experience in instrumentation and control systems.
• Diploma or Bachelor's degree in Electrical/Electronics Control Engineering or a related field.
• Proficiency in handling PLC instrumentation, LSS, FAS, and SCADA LoT.
• Proven troubleshooting skills within control systems.
• Experience with programming languages such as Tableau, Visual Studio, Python, and SQL is highly desirable.

We are looking for candidates who have experience in the ACMV systems and has experience working in Design and Build, property or construction companies or engineering companies.

The candidate will be required to:

• Conduct site survey
• Prepare shop drawings using AutoCAD and actively follow up on subsequent comments and changes
• Preparation of design report, calculation and cost estimation
• Attend project safety meeting and site co-ordination meeting
• Follow up and reporting on the project progress
• Able to carry out testing & commissioning and basic trouble shooting of the system
• Preparation of OMM Manual, as-built drawings, training and DLP Program

We need the candidate to have:

• Diploma or Degree in Mechanical (Air-Conditioning and Mechanical Ventiliation) Engineering
• At least 2 years of local work experience in designing ACMV / piping and piping structural support / ducting
• Proficient in Autocad software
• Ability to work independently and target oriented in a fast-paced environment

Job Description & Requirements

Job Responsiblities:

• Collect daily job notifications from the Board’s officers at the start of each work day.
• Carry out site survey at customer’s premises in advance of actual meter fixing/removal/replacement works to assess site conditions (for example, no obstruction to meters, valves on water mains are as per plans).
• Site survey before meter fixing/removal/replacement job, supervision of contractor’s work
• Check and record initial readings on new meters and final readings on old meters, including photographic records
• Service Includes taking records of works in progress/completed, ensuring work procedures and safety measures are carried out as specified, reporting any incident promptly, maintaining close contact with PUB officers, managing and tracking the movement of meters including related fittings, supervision of metering works as directed and in accordance with daily check sheets.
• Carrying out site visit to check on the meter condition, interviewing customers to establish the facts, taking additional meter readings on site for analysis.

Job Requirements:

• Diploma in any engineering field.
• Must have own transportation

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

• Opportunity to work in an Asian MNC with a presence in Singapore, Malaysia and Vietnam
• Concrete and technology innovation is the core of what we do
• Passionate, energetic and innovative work culture

Responsibilities:

• Work at the heart of our Ready-Mixed Concrete operations: In our world-class Innovation Centre, Command Centre and/ or island-wide batching plants
• Conduct regular in-house testing to monitor concrete raw materials and product performance, in accordance with international test standards and specifications
• Assist in all measures related to product quality control
• Liaise with customers to ensure deliveries are arranged accurately and production targets are meet
• Perform quality control works at both batching plants and on site
• Educate staff and drivers on the importance of good quality control for concrete
• Other ad hoc assignments as assigned

Requirements:

• Diploma / Bachelor’s Degree in Engineering (Civil) or equivalent
• Entry Level candidates are welcome to apply
• Familiar with the fundamentals of concrete properties, admixture technologies and applications
• Familiar with SSEN, ACI, ASTM, and BS/ EN standards or specifications for Civil
• Engineering and concrete
• Proficient in written and spoken English
• Able to work independently with a positive attitude to deliver within tight deadlines
• Strong interpersonal and customer relationship skills

Interested applicants are invited to sent in full resume, stating current & expected remuneration via "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

Job Scope :-

• Track, Monitor, Control & Update Work Progress on Site
• Plan & Schedule for Site Inspections according to Work Progress Status
• Coordinate and Schedule draw 3D Drawings & Sample Submission for Approval to client
• Conduct Regular Internal Review meetings with Trade Contractors for Site Arrangement, Work Progress, & Technical Resolutions
• Perform Authorities submission including MOM, LTA, NEC, SCA, and any others deemed necessary for the site nature
• Support current direct sales activities
• Creation for new customer
• Support distributor’s sales activities
• Creation, maintenance and management of Social Networking Services content in each country
• Sales Tool Preparation (Clinical Data)
• Business planning
• Contract & negotiation with new Distributor
• Network building with the same industry
• Cultivate new customers
• Other ad-höc duties assigned

Job Requirements :

• Engineering or above on Electrical or Mechcaniacl flied or related discipline any bachelor degree
• At least 3-4 years of experience in A&A work and technical coodinator to lead the bussiness
• Strong leadership to monitor workers for the works executed
• Demonstrate ability to handle Work independently and efficiently
• Good interpersonal skills and be able to interface with all levels, internally and externally, in a responsive manner.

Job Description

• To assist in contract administration which include cash flow/ budgetary forecasts, cost estimates, cost data analysis, tender evaluation, processing of payments, claims, variation orders and preparation of reports and approval papers
• To ensure that contracts are administered in accordance with executed contract documents

Responsibilities:

• Coordinate with internal operation, M&E and Design team for interfacing works affecting architectural items
• Attending meeting with client, consultants or sub-con to discuss all architectural related issues.

Requirements:

1. Degree in engineering specialization in electrical and electronics engineering.

· Have experience in engineering life cycle of Power Projects and have gone through all phases of project starting from FEED stage to conceptual and basic design to detailed engineering, procurement, tendering, construction to commissioning.

· Programing skills PLC, SCADA, AUTO CAD

· At least 3 years’ experience in local project

Job Description & Requirements

Job Responsiblities:

• Collect daily job notifications from the Board’s officers at the start of each work day.
• Carry out site survey at customer’s premises in advance of actual meter fixing/removal/replacement works to assess site conditions (for example, no obstruction to meters, valves on water mains are as per plans).
• Site survey before meter fixing/removal/replacement job, supervision of contractor’s work
• Check and record initial readings on new meters and final readings on old meters, including photographic records
• Service Includes taking records of works in progress/completed, ensuring work procedures and safety measures are carried out as specified, reporting any incident promptly, maintaining close contact with PUB officers, managing and tracking the movement of meters including related fittings, supervision of metering works as directed and in accordance with daily check sheets.
• Carrying out site visit to check on the meter condition, interviewing customers to establish the facts, taking additional meter readings on site for analysis.

Job Requirements:

• Diploma in any engineering field.
• Must have own transportation

Job Description & Requirements

Job Responsiblities:

• Collect daily job notifications from the Board’s officers at the start of each work day.
• Carry out site survey at customer’s premises in advance of actual meter fixing/removal/replacement works to assess site conditions (for example, no obstruction to meters, valves on water mains are as per plans).
• Site survey before meter fixing/removal/replacement job, supervision of contractor’s work
• Check and record initial readings on new meters and final readings on old meters, including photographic records
• Service Includes taking records of works in progress/completed, ensuring work procedures and safety measures are carried out as specified, reporting any incident promptly, maintaining close contact with PUB officers, managing and tracking the movement of meters including related fittings, supervision of metering works as directed and in accordance with daily check sheets.
• Carrying out site visit to check on the meter condition, interviewing customers to establish the facts, taking additional meter readings on site for analysis.

Job Requirements:

• Diploma in any engineering field.
• Must have own transportation

• Supervise work done on Site
• Taken instructions on behalf of the Contractor from the Employer
• Determite completion of wokes at the Site
• Attend immediately to any malfunction or breakdoen of any installation
• Once fault been resolved and the works have been completed submit to the Employer a status
• update by the next working day following the date of resolution of the fault

Requirement

• Holding Minimum of diploma in Mechanical, Electrical , Construction Managment , Building Managment , from Polytechinic or education institute recongnized by the Professional Engineers Board, SISV or others body which may be recognized by the employer
• Minimum of three(3) years of relevant working experience , or Tier 3 Accreditation of Society of project manager (SPM) Or Accreditation Construction Professional C by Singapore Contractors Association Ltd(SCAL)

Job Types: Full-time, Permanent

You will work in a Project team and your responsibilites and task will include:

• Front end engineering design
• Develop detailed system design: including integration of systems
• Calclulation $ Studies (RF, Network PAGA, CCTV, etc)
• Provide accurate and detailed project documents and drawings
• Interface with sub vendors to ensure they meet the project requirements.
• Configuration and testing
• Support to the service tean
• Support to the tender and sales team

EA License No: 96C4864

Reg.No : R24122513 (NICOLE CHIN JIA EN)

Job Description & Requirements

Job Responsiblities:

• Collect daily job notifications from the Board’s officers at the start of each work day.
• Carry out site survey at customer’s premises in advance of actual meter fixing/removal/replacement works to assess site conditions (for example, no obstruction to meters, valves on water mains are as per plans).
• Site survey before meter fixing/removal/replacement job, supervision of contractor’s work
• Check and record initial readings on new meters and final readings on old meters, including photographic records
• Service Includes taking records of works in progress/completed, ensuring work procedures and safety measures are carried out as specified, reporting any incident promptly, maintaining close contact with PUB officers, managing and tracking the movement of meters including related fittings, supervision of metering works as directed and in accordance with daily check sheets.
• Carrying out site visit to check on the meter condition, interviewing customers to establish the facts, taking additional meter readings on site for analysis.

Job Requirements:

• Diploma in any engineering field.
• Must have own transportation

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

OUR ROLE

As an engineer accountable for the introduction of new product within the Power Transistor sub-Group, you will be mainly responsible for the characterization and qualification of Silicon Carbide Technology based Power MOSFETs along with other technologies in our portfolio like Silicon MOSFETs , IGBTs, GaN HEMT and Power Modules.

The job holder will be involved in characterization laboratory activities such as:

• Testing program development, debug and deployment.
• Product characterization either at wafer and package level.
• Data analysis and reporting.

YOUR SKILLS & EXPERIENCES

• Bachelor/Master’s degree in electrical engineering or close related field.
• 3 to 5 years of direct work experience in a semiconductor environment, preferably as a Test Development Engineer and/or Product Engineer.
• Experience/Knowledge in new product characterization and qualification.
• Understanding of semiconductor physics and power transistors functioning is a must have.
• Knowledge of Wide Band Gap technologies/products such as Silicon Carbide and Gallium Nitride is considered a plus.
• Experience with some industry Automated Test Equipment such as Teradyne (ETS88TH), SPEA (DOT800), ACCOTEST (STS 8200), TESEC (431TT), B1505a.
• Test Software development experience & skills, including knowledge of C/C++ .
• Excellent communication skills, detail-oriented work ethic, ability to work independently with minimum supervision.

• Serve as the Test Manager, comprehensively understanding business requirements for the Core Banking System, Fund Transfer, and other related banking systems, ensuring all testing in alignment with the requirements
• Responsible for conducting IT software testing
• Collaborate closely with various stakeholders to ensure effective and efficient teamwork throughout the testing process.
• Key stakeholders include: End users, system development teams, and back-office departments from the head office Test support teams from other IT vendors and Offshore vendors

Qualifications:

• Bachelor’s degree in Information Technology, Computer Science, or a related field with a minimum of 5 years of experience supporting IT project test phases within the banking sector.
• Experience in IT software testing, with prior experience as an IT professional in a banking or financial institution will be advantageous.
• Lead the creation of test plans and test definitions for banking IT systems, demonstrating knowledge in software quality management including software testing methodologies, including the creation of test plans, test documentation, execution of test cases, and analysis of test results.
• Experience in managing risk and control processes, including timely escalation and resolution of significant issues to management.
• Proven experience in collaboration, teamwork, and strong leadership in managing stakeholder relationships.
• Demonstrated project engagement skills, including the preparation and presentation of regular reports and documentation, effective communication of project status and progress to stakeholders and IT teams, and alignment with business priorities.

Work location: Changi Business Park (One@ Changi City)

To apply, please visit www.gmprecruit.com and search for Job Reference: 24771

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Provide advice and resolve creatively any emerging problems/deficiencies
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Comply with guidelines and regulations including permits, safety etc and deliver technical files other technical documentation as required
• Other ad-hoc duties assigned

• Design and develop ATE (Automated Test Equipment) programs for new products, covering both production and characterization testing.
• Engage in hands-on testing debugging, conduct RMA analysis, and enhance testing solutions for both hardware and software.
• Develop a test plan for the product, including scheduling, resource needs, and overseeing project tracking and execution.

Requirements:

• Degree in Electrical/Electronics Engineering
• At least 3 years of leadership experience in ATE test program development.
• Proficient in C++/ VB, ATE testers and Chroma.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Roles & Responsibilities

Plan, lead and supervise upgrading works, addition and alteration works

Lead a team of supervisors and workers and oversight of manpower for project execution

Ensure designs / drawings meet relevant code and compliance requirements, and good engineering practices

To attend site matters / discussions to resolve technical / site issues and progress matters

Continuing to improve all installation works schedule and quality of work through proper planning of work method, materials procurement and selection, and efficient site management

Monitor and control project schedule, materials delivery and budget etc

Liaise coordinate with clients, consultant, project supervisors and sub-contractors on project related issues and to ensure project objectives are met

To supervise and ensure works are in accordance to the contract drawings and specifications

Establish and maintain a detailed tracking and filing system of all documents

To prepare, submit Variation Claims with instruction documents & part-plan from client

Maintain all filing systematically & uploading of softcopies in the system

To place materials order to Purchaser in advance as per Order list as per site requirement

Responsible for ensuring implementing safety measures

Only qualified candidates will be notified for interviews.

Job Description & Requirements

Job Description

• To assist in contract administration which include cash flow/ budgetary forecasts, cost estimates, cost data analysis, tender evaluation, processing of payments, claims, variation orders and preparation of reports and approval papers
• To ensure that contracts are administered in accordance with executed contract documents

Responsibilities:

• Coordinate with internal operation, M&E and Design team for interfacing works affecting architectural items
• Attending meeting with client, consultants or sub-con to discuss all architectural related issues.

Requirements:

1. Degree in engineering specialization in electrical and electronics engineering.

· Have experience in engineering life cycle of Power Projects and have gone through all phases of project starting from FEED stage to conceptual and basic design to detailed engineering, procurement, tendering, construction to commissioning.

· Programing skills PLC, SCADA, AUTO CAD

· At least 6 years’ experience in local project

Overall Job Summary

The incumbent is responsible to provide support in the day-to-day overall HR and office administration functions, including handling of administering pay and employee benefits, recruitment and selection, training and development, updating of HR policies and procedures, employee relations and administrative matters.

Responsibilities and Duties

• Advertise, search and schedule candidates for interview
• Process clients’ monthly payroll and CPF
• Manage end-to-end process of on boarding and off boarding of employees
• Handle EP, work pass application, renewal, and cancellation
• Support daily administration/operations matters
• Other admin duties assigned by the Manager

Job Requirements

• Minimum 2 years of relevant HR experience with a diploma / degree in Human Resources Management or equivalent.
• Possess effective verbal and written communication skills.
• Resourceful, initiative, self-motivated, diplomatic and people-oriented.
• Good team player and yet able to work independently with minimal supervision.
• Ability to multi-task with good time management skills.
• Proficient in Microsoft Word, Excel, Power-point and IT savvy.
• Experience with Opensoft and Success Factors HRIS software will be an added advantage.
• Able to commence employment within short notice.

Responsibilities

• To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples
• To liaise and work with relevant authorities, sub-contractors, main contractor or clients on shop drawings, materials and samples
• Review and align ACMV design drawings to ensure compliance with design specifications and guidelines
• Knowledge in M&E and able to identify discrepancies between M&E, structural, ID, architectural and client provisions
• Manage and execute project as per the deadline
• Attend meeting with subcontractors / contractors / clients to address issues and update progress
• Study and review drawings, specifications for compliance
• Allocate work and ensure jobs are correctly and properly achieved within standards and SOP.

Requirements:

• Diploma / Degree in Mechanical Engineering
• Candidate with more than 10 years of relevant experience will be considered for Senior position
• Preferably candidate with relevant working experience in the Construction Industry especially in ACMV system installation
• Sound knowledge in ACMV System, Local / International Code of Practice / Standard, Green Mark Requirement, Hydronic / Static Calculation, BIM, Revit, Autocad would be an advantage
• Good working attitude and a team player
• Proficient in Microsoft Office