• Instrumentation of measurement and detection equipment for military and homeland security.
• Oversee post-sales delivery of equipment, conduct scheduled maintenance, and conduct diagnostic analyses for troubleshooting and repair tasks.

Requirements:

• Higher Nitec in Electrical & Electronics Engineering or equivalent.
• At least 2 years of working experience

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

To ensure work is construct in accordance with contract and drawings.

Planning of Architectural Works and micro scheduling with other disciplines.

Liaise with main-contractors, suppliers, etc. Procurement and Monitoring of Architectural related materials.

*Coordinate, review and verify drawings including owner & maincontractor’s drawings to ensure compliance with design specifications and guidelines.

*Able to work in a fast-paced environment and both independently and in a team.

Requirements

*Experienced in AutoCAD 3D, and able to understand architectural or structural drawings

Responsibilities:

- Systems design and selection of equipment instrumentation and controls.

- Reviewing of customers’ specifications requirement and drawings.

- Define specifications and scope of work to contractors.

- Startup, testing, commissioning and troubleshooting of plants.

- Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control. - Responsible for Single Line Drawing, Control Schematic drawings. - Develop engineering capabilities and work with sales team on project proposal and bidding.

- Reviewing of customers' specifications and drawings.

- Execution of projects.

- Preparation of tender activities.

Requirements:

- Recognised degree by PE Board in Electrical / Instrumentation Engineering.

- Minimum 3 years relevant working experience, preferably with experiences in FEED of LV/MV switchboards, MCC, MCB, Control Panels etc and in Water & Waste Water industries.

- Knowledge in Instrumentation and Control.

- Able to read & understand single line diagram and generate Bill of Materials from single line diagram.

- Knowledge on control, schematics, motor controls and materials take-off.

- Proficient in AutoCAD, Microsoft Office.

- Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage.

- Those with relevant project management, process design, and service & maintenance experience will be an added advantage.

*** Please apply with detail resume, stating present and expected salary, date of availability and/or notice period required.

The Automation Team Engineer plays a crucial role in automating and orchestrating security processes to enhance the efficiency and effectiveness of our Security Operations Center (SOC) in a multi-client Managed Security Services Provider (MSSP) environment.

This role involves managing and optimizing SOAR and ticketing platforms, integrating diverse tools and technologies across on-premises and cloud environments, and ensuring seamless functionality of automated workflows.

As the Subject Matter Expert (SME) in automation, you will lead the design, development, and refinement of playbooks, align automation solutions with customer-specific requirements, and support SOC operations by identifying and implementing process improvements.
The position also requires advanced scripting capabilities and the ability to troubleshoot and resolve automation-related issues proactively.

This role demands a collaborative mindset, strong problem-solving skills, and a passion for continuous improvement in a fast-paced and dynamic environment. The ideal candidate thrives on reducing manual tasks through automation and is committed to delivering high-quality security services.

Key Responsibilities

Automation and Orchestration:

• Proactively design and implement automated workflows using SOAR and Ticketing platform to optimize security operations and reduce manual processes.
• Integrate various security tools and systems (e.g., SIEM, EDR, firewalls) into the SOAR platform to enable seamless interoperability.
• Act as the SME for automation-related issues, troubleshooting and resolving escalated problems promptly.

Playbook Development and Maintenance:

• Develop, update, and refine playbooks to meet client-specific requirements and operational goals.
• Ensure all playbook creations, updates, and changes are meticulously documented.
• Collaborate closely with the operations team, customer success managers, and threat detection teams to align input and output with requirements.

Scripting and Customization:

• Develop custom scripts, primarily in Python, to create unique integrations or enhance existing workflows.
• Identify and execute opportunities for automation across SOC processes, leveraging creative and innovative solutions.

Collaboration and Knowledge Sharing:

• Work closely with internal and customer teams to understand operational challenges and provide effective automation solutions.
• Deliver mentoring and training sessions to enhance team capabilities in leveraging automation tools.

Process Improvement:

• Continuously evaluate SOC workflows to identify areas for improvement and automation opportunities.
• Contribute to the standardization of processes to ensure the highest level of quality and efficiency.

Ad-Hoc and After-Hours Support:

• Provide support after office hours for critical SOAR-related issues and activations.
• Assist in any ad-hoc tasks as necessary to ensure smooth SOC operations.

Key Requirements

Technical Expertise:

• Hands-on experience with SOAR platforms, preferably Palo Alto XSOAR, Servicenow, and SIEM tools like QRadar, Splunk, or Azure Sentinel.
• Strong knowledge of scripting languages, particularly Python, with 2-5 years of practical experience.
• Familiarity with ITSM platforms like ServiceNow, including the SecOps module, is an advantage.

Cybersecurity Knowledge:

• Solid understanding of cyber-attack vectors, security threats, and mitigation techniques.
• Experience in SOC environments (1-3 years preferred) with exposure to incident response processes and tools.
• Knowledge of reverse engineering of software is a plus.

Problem-Solving and Analytical Skills:

• Proven ability to analyze issues, identify root causes, and implement effective solutions.
• A mindset geared toward continuous improvement and process automation.

Soft Skills:

• Excellent communication and collaboration skills, with the ability to work effectively in diverse, fast-moving environments.
• Strong attention to detail and a proactive approach to problem-solving.
• A team player with a preference for automated workflows over manual processes.

Certifications (Preferred):

• Palo Alto Cortex XSOAR certification.
• Industry certifications such as CISSP, CEH, or GCIH.

Work Environment:

• Willingness to work in a fast-paced environment with short turnaround times.
• Availability for after-hours support when needed to resolve SOAR-related issues.

Work location: Ang Mo Kio

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Production Test Manager | 5 Days | Hands-On Development Exp in J570 / Teradyne Tester

Working Location:Tai Seng
Working Days:5days (office hours)
Salary Range:$10,000 – $12,000

Job Requirement:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Job Requirement:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

• Working Location: Tai Seng
• Working Days: 5 days (office hours)
• Salary Range: $10,000 – $12,000

Requirement:

• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Requirements:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

• Working Location:Tai Seng
• Working Days:5days (office hours)
• Salary Range:$10,000 – $12,000
  
  Job Requirement:
• ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design/Develop Final Test Loadboard and Wafersort Probecard
• Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting
• Monitor and manage production test yields, maverick lots, engineering lots, product test log maintenance, product data statistical process, characterization data process.
• Hands-on test debugging, RMA analysis, and improving test solutions (Hardware and Software)
• Establish cost-effective production test solutions
• Develop team technical competency.
• Build product test plan, schedule, resources requirement and project tracking and execution.
• Conduct product test and releases review, approve the test program releases.
• Maintain and improve the product test process.

Job Requirement:

• Minimum Bachelor's Degree in Engineering (Electrical/Electronics)
• Minimum 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Good knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is a must with Teradyne J750 ATE testers, IG-XL test programming
• Hands-on development experience with Chroma and other main stream testers.
• Project management skills and experience in people management.
• Preferred: Knowledge in AEC Q100 automotive qualification guidelines, experience in the automotive test flow, AEC Q100 data analysis, wafer and FT lot process.

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

The Job:

• Perform manual testing for user acceptance testing for various systems
• Perform end to end User Acceptance Testing (UAT) with full understanding of the Business Requirements and Functional Specs.
• Track and monitor testing progress and defect resolutions.

The Requirements:

• Min GCE A level
• Proficient in MS Office

Interested applicants can send their detailed resumes to [email protected] or call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg. No. 199601303W || EA Licence No. 99C4599

Our esteemed client, an established MNC, is searching for a QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: 5-day work week
• Working Hours: 8:15 am to 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, Etabs, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

Responsibilities:

• Assist Project Manager in daily site operation.

• Prepare Daily Report and submission.

• Prepare work Inspection Checklist and submission.

• Prepare materials request and arrange for delivery.

• Prepare request for fabrication.

• Receive and verify materials delivered and record GDN and DO.

• Update drawings and drawing register, receipt and issue of drawings.

• Ensure all documented records are properly filed.

• Organize the project site and other places of work so that all operations are carried out to the required standards with the minimum of risk to men, equipment and materials.

• Plan and maintain a tidy construction site.

• Arrange the delivery and stacking of material in such a manner as to avoid increasing the risks involved by double handling.

• Implement arrangements with sub-contractors and other contractors on the project site to avoid any confusion about areas of responsibility.

• Ensure that periodic tests, inspections and maintenance work are being carried out.

• Ensure that all repair and maintenance work carried out on the project site is done in a proper manner.

• Ensure that correct procedures and system of work are being developed and maintained.

• Attend promptly to all notified plant defects or bring to the attention of the relevant Foreman the need for Dangerous plant to be put out of service.

• Manage & Comply with Workplace Safety & Health for project execution.

Requirements:

• Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent

• Minimum 4 years of site experience in construction field is preferred.

• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner.

• Dedicated, committed, a good team player
• Possesses excellent planning, analytical and organization skills
• Assist in engineering design and calculation
• Clarify and resolve technical issues with customer / contractor
• Structural drawing, calculation and analysis of the tower crane
• Other ad-hoc duties as and when assigned
• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• At least 1 Year(s) of working experience in the related field is required for this position.
• Fresh graduate are welcome
• Able to work at high element environment
• Willingness to travel in a short notice
• Required Skill(s): Solidworks, Steel Structural Design and Calculation, Mechanical Design, Mechanic of material, Microsoft office

Test Engineer

Our reputable client is looking for a System Test Engineer Lead (Selenium) to handle test plan, design, planning and setting up Test Lab. The incumbent is required to lead Installation, checkout, integration and testing (ICIT) at customer’s sites.

Responsibilities:

• Involved in System Test Plan and System Engineering Design.
• Responsible for Planning and Setting up Test Lab and conduct Factory Acceptance Test.
• The ability to perform Troubleshooting and Resolving System Faults and Perform On-Site Acceptance Test.
• Involved in lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

• Strong in performing System Test and Design.
• Strong knowledge in handling Infocomm Technology, RedHat Linux, Virtual Environment, Network Security.
• Experience in handling System Test Plalnning and Troubleshooting.
• Minimum 5 years of System Test experience using Selenium.
• Experience in leading a Team of Engineers.
• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Singaporeans Only.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Responsibilities

1. Work with business development, Engineering, system test and external customers to gather information and develop RF Test plans, specifications for product under test.
2. Perform RF testing using test equipment such as spectrum analyzer, noise figure meter, power meter, network analyzers, and signal generators.
3. Assembling/debugging the RF test system and device under test.
4. Hands on troubleshooting and repair of RF product till component level using RF and digital measurement tools & equipment.
5. Analyze test data and provide reports on yield.
6. Document test procedures, results, and any issues encountered during testing and debugging.
7. Assist in the development of new RF testing methodologies and best practices.
8. Do simple antenna parametric radiation measurement

Requirements

· Diploma /Bachelor in Electronics or Communication Engineering, or equivalence

· Preferably with at least 2 years of working experience in a product-based electronics manufacturing environment / product development.

Skills, Experiences & Knowledge

· Experience in automating test and measurements using bench test equipment.

· Knowledge of programming software in C, C#, Python or LabView.

· Experience with PCB design software

· Experience in antenna parameter measurement

· Preferably with soldering experience

· Excellent communication and documentation skills.

Kindly forward your resume in Word format to apply(at)tekvillage.com

EA Licence No: 18C9120

EA Personnel: R1764354

Note: Only shortlisted candidates will be notified.

• Well Established Company
• Basic $3800 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)
EA Recruitment Pte Ltd
EA License No: 21C0492

• Well Established Company
• Basic $4000 - $4800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Responsible for quality issues arising from production and customer feedback, and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements
• Perform any other duties, as assigned

Job Requirements:

• Minimum Diploma or Degree in Precision Engineering, Quality Management or Mechanical Engineering with 2 years of working experience in quality engineering or manufacturing

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Basic Salary: $6,000 to $8,000 Basic + $1,000 Transport allowance + Mobile + Sales Commission

• Possess sales experience in SEMICONDUCTOR FRONT END PROCESS

Our client is a Europe MNC & a global leader of instrumentation equipment in the semiconductor & pharmaceutical industry.

Responsibilities:

• Manage & grow client base from MNC to SME
• Achieving or exceed sales & revenue targets
• Support, perform & coordinate instrument demo to clients
• Manage complex sales with ability to sell across different levels within accounts

Requirement:

• Diploma or Degree
• Possess Sales experience in Semiconductor Front End process
• Proficient in Chinese to coordinator with Chinese speaking clients

Kindly email your resume in a detailed Word format to

[email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Tel: 6950 9757

• Well Established Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Central
• Working days: Monday to Friday
• Working hours: 8.30am – 5.30pm

Job Responsibilities:

• Manage and work with project team to assigned project(s)
• Perform engineering duties such as engineering calculations, planning, tender, estimates, costing, taking off measurement
• Liaison with clients, project managers, consultants, contractors, and other stakeholders who handling the project matters
• Preparation / Evaluations as part of the engineering project team
• Update projects monthly report and assist on progress claims, progress payments and finalization of accounts
• QA/QC documentation review of engineering deliverables
• Any other required duties as required by the Project Team
• Suggests ways to increase revenues and efficiency
• Interpretation of specifications, terms and conditions, drawings and any other relevant documents
• Carry out testing and commissioning of M&E installations
• Assist the site team on obtaining Variation Orders (VOs), Value Engineering, Recruitment
• Other scope of work assigns by the Senior Project Manager / Project Director
• Any other ad-hoc duties as assigned

Job Requirements:

• Possess at least Diploma / Advanced / Higher / Graduate Diploma in Mechanical Engineering or equivalent with minimum 3 years relevant work experience in relevant field

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Salary $2800 - $3200 + Incentives + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• 12 Hours Shift

Job Responsibilities:

• Responding to intrusion alarm system activation
• Performing maintenance service, commissioning of alarm systems
• Attending to customer request on alarm and card access systems
• Conducting patrols at night
• Any others ad hoc duties as assigned

Job Requirements:

• Possess minimum Higher Nitec and/or Diploma in Electrical Engineering, Electronic & Computer Engineering, Mechanical Engineering, and other related fields
• Possess at least 1- 2 years of relevant experience
• Possess Class 3 Driving License will be an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities

• Responsible for leading and managing the full life cycle R&D projects and product delivry by planning, organizing, executing and evaluating from conception to completion.
• Ensure successful delivery of project scope and targets while managing project risk, quality, delivery, scope, schedule, and budget.
• Partners with internal and external stakeholders to establish communication plans, build project schedules and establish clear project deliverables and milestones.
• Drive leadership by motivating project team members in the design, development, and delivery of R&D solutions to customers.
• Ability to demonstrate a good level of understanding of technical/engineering processes in order to work with teams throughout the project development cycle
• Track, monitor and report the progress of the project to all stakeholders
• -mplement and manage project changes and interventions to achieve project deliverables and mitigate risk
• Overall project evaluation and assessment of results.
• Establish project lifecycle management procedures and best practices to ensure project teams maintain discipline needed to successfully complete their projects.

Job Requirements

• Bachelor or Masters in any engineering related discipline
• PMP certifications or equivalent is advantageous
• Proven track record of executing multiple successful projects
• At least 3 year(s) of working experience in project management experience in related field (R&D, engineering)
• Strong business acumen, driven to deliver customer requirements and project deadlines
• Outstanding project management capabilities; i.e. planning, risk management, status reporting, budget tracking, stakeholder management, resource management
• Knowledge and understanding of re-manufacturing techniques and limitations
• A team player and technically motivated to solve problems, innovate and deliver to internal and external customers
• Strong communicator with excellent interpersonal skills

No experience/Diploma in precision/mechanical/mechatronic/electrical/electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2600-$2800+OT+allowances>$3K

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

• MNC Company
• Salary $3500 - $4500 + Allowances + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working days: Monday to Friday
• Working hours: 8.30am – 5.30pm

Job Responsibilities:

• To supervise, execute and coordinate project activities together with a group of Engineers and Technicians leading to successful project completion
• Monitor and control project on schedule, within budgeted cost and quality standards
• Work closely with consultant/owner to ensure project is delivered according to requirements
• To perform system programming and troubleshooting during project implementation
• Any other tasks assigned by superior

Job Requirements:

• Possess minimum Higher Nitec and/or Diploma in Electronics and/or Electrical Engineering or relevant field with 1-2 years of relevant experience
• Possess Class 3 Driving License will be an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Industry: Manufacturing

Located at Ubi

Japanese MNC

Have AWS + Bonus + Yearly increment

Mon to Fri 8.30am to 5pm

Basic $2400-$2800+fix allowances $500 or $1200 (own car)

Training provided

Job Description

• To support, troubleshoot and maintain automation machine in Field / Site.
• To setup and debug automation machine in factory.
• To support commissioning and decommissioning on automation machine.
• To provide training to customer for automation machine at site.
• To assemble Mechanical modules, reference from CAD model.
• To troubleshoot errors in design on First Article machine.

Requirements

• Diploma in any Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

• Well Established Company
• Basic $3500 - $4000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.15am to 5.15pm

Job Responsibilities:

• Responsible for outdoor and indoor repair work of all cleaning products
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Any ad hoc duties as assigned

Job Requirements:

• Possess at least a Professional Certificate/ Nitec in any Electrical & Electronic or Mechatronics Engineering or relevant qualification
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492