Job Responsibilities:

• Manage M&E work with specialist sub-contractor and M&E coordinators
• Monitor the progress of work
• Supervise / preparation of shop drawings, as-built M&E drawings and O&M manual
• Manage and supervise in the administration / inspection of M&E work, handover of M&E services
• Ensure compliance with requirements of various authorities and specifications
• Coordinate technical issues with M&E consultants
• Coordinate all site matters with structural and architectural trades

Job Requirements:

• Relevant Degree recognized by PEB/BCA
• Diploma holders with extensive experience in construction projects can also be considered.
• Minimum 5 years of relevant experience
• Analytical, organized and possess strong planning skills
• Excellent project and time management abilities
• An effective communicator and has strong interpersonal skills
• Highly driven and able to work under minimum supervision

We are excited to announce an additional headcount as our company is expanding. We are looking for a candidate who meets the requirements below. If you think you are the “ONE,” we would love to have you join our team.

What You Will Do:

- Perform installation, setup, commissioning, routine maintenance, and troubleshooting of scientific equipment at customer sites.

- Prepare service test reports, mapping reports, and IQ/OQ documents for customers.

- Provide excellent customer service through product knowledge, handling customer feedback, prompt responses, and collaborating closely with the team.

- Take ownership of all assigned projects and assist with other tasks as required and assigned by the Superior.

What We Look For:

- Higher Nitec/Diploma in Engineering field

- Candidates without experience will be considered but must have a willingness to learn.

- Ability to work overtime when necessary.

- Willingness to grow together with the company.

What We Offer:

- Competitive salary

- Comprehensive benefits package

- On-the-job/cross-training opportunities

- Encouraging and collaborative team environment

If you are ready to take on this exciting opportunity to grow with the team in a dynamic, start-up environment, wait no further and share your profile with us to discuss more.

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

Primary Function / Primary Goals / Objectives:

• Lead site wide implementation of Food Safety initiatives. Consulting with Division Food Safety SME where necessary.
• Drive and implement continuous improvements to enhance quality and food safety in our products in a cost effective manner.
• Develop training materials and conduct training as part of roll out of Food Safety initiatives.
• Monitor and report project milestones. Ensures timely and successful execution of changes.
• Improve Food Safety culture and raise awareness of Food Safety through various initiatives.
• Improve site Hazard Analysis Critical Control Point (HACCP) system.

Major Responsibilities:

• Establish project milestones and ensures tracking for timely completion.
• Training of cross functional team on the new Food Safety initiatives.
• Implement Change Management Tools (example, CLRS) to ensure successful roll out of Food Safety initiatives.
• Drive continuous improvement projects to drive efficiency and cost for the plant.
• Establish Standard Operating Procedures for new Food Safety initiatives.
• Implement improvements to site HACCP and risk assessment.
• Any other duties as assigned by Supervisor.

Requirements:

• Bachelors’ Degree in engineering (chemical / biomedical), manufacturing, industrial management, or a related field.
• Min 3 years of experience in quality project management, preferably in food/pharmaceutical manufacturing industry.
• Good practical knowledge of GMP in food / pharmaceutical manufacturing.
• Good leadership and problem-solving skill.
• Good communication and report writing skill.
• Good project management skill.
• Team player with initiative, drive, good communication skills and a strong command of written English.
• Knowledge in HACCP and risk assessment.
• Knowledge in food engineering and experience in a dairy / nutritional industry would be advantageous.
• Knowledge and experience in driving cultural changes in organization is preferred.

*Kindly note this position is based in Tuas and it is a 12-month contract opportunity.

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Data Quality Engineer/Analyst

Internal Code: A24122

This is a healthcare application:

• Mobile application (iOS and Android)
• Dashboard (React)

What will you do?

Support the development and business teams in unit testing and archiving data, engineered features, and algorithmic inputs/outputs throughout the data pipeline and to support analytics.

Proven experience as a data engineer/ data analyst in mobile app development projects and administrative dashboards.

1. Create unit tests throughout the data and algorithms domain:

• Work with engineering and business teams to implement wide-coverage unit tests of data and engineered features at different stages throughout the data collection and processing pipeline
• Create unit tests of inputs to and outputs from the algorithms that drive the clinical service
• The unit tests include validation of the inputs and outputs of black-box machine learning algorithms
• Establish a regular process to execute the tests and document their outcomes as a part of our product development and release lifecycle

2. Implement and refine mechanisms to continuously archive the state of algorithmic inputs and outputs:

• Implement a process of taking snapshots of data/features input into algorithms necessary to recreate their outputs/predictions at any point in the past during the service
• Communicate requirements to the software development team

3. Assist in the successful delivery of regular service analytics and reports:

• Support the business and analytics teams in their daily and weekly delivery of reports on data completion, user engagement, and algorithm actions by addressing any data quality and validation requirements.

What are we looking for?

• Bachelor's Degree in computer science, engineering, business analytics, technology, or a related field.
• Minimum of 2 years of experience in data engineering, data analytics, or data product management roles within the tech industry. Experience in healthcare is a plus.
• Ability to implement tests in Python.
• Experience in machine learning algorithms
• Good understanding of the validation requirements of an algorithmic product. Knowledge of healthcare regulation and auditing requirements is a plus.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Description & Requirements

• Minimum Degree in Mechatronics/Computer Science or Equivalent.
• 5 years’ of experience in programming on Windows
• Proficiency with C++, VC++, MFC, SQL and OOP.
• Must have experience in Semi Equipment SECS/GEM Protocol
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.

Key Responsibilities:

• Design and develop machine control software for automated semiconductor equipment.
• Integrate Software or OEM Equipment
• Conduct Analysis, recommend changes to improve equipment performance
• Develop Control Software
• Provide Support for on-site installation

Responsibilities

• Design and implement electrical systems for construction projects.
• Prepare detailed project plans and specifications.
• Conduct site inspections to ensure compliance with electrical codes and standards.
• Troubleshoot and resolve electrical issues on-site.
• Coordinate with project managers, contractors, and other engineers.
• Ensure all electrical work is completed on time and within budget.
• Maintain accurate records of all electrical work performed.
• Provide technical support and guidance to other team members.
• Review and approve electrical designs and plans.
• Ensure all electrical systems are safe and operational.
• Conduct risk assessments and implement safety measures.
• Stay up-to-date with the latest electrical engineering technologies and practices.
• Prepare and present reports on project progress and electrical issues.
• Manage and supervise electrical contractors and subcontractors.
• Ensure compliance with all relevant regulations and standards.
• Participate in project meetings and provide input on electrical matters.
• Develop and implement maintenance schedules for electrical systems.
• Assist in the procurement of electrical materials and equipment.
• Provide raining and support to junior engineers and technicians.

Requirements

• Bachelor's degree or Diploma in Electrical Engineering or a related field.
• Minimum of 3 years of experience in electrical engineering

Responsibilities

• Responsible for the design and delivery of DeltaV application system on site.
• Participate in the development and implementation of Automation solutions in line with S88 standards for the plant.
• Creates and maintains applications according to technical design and requirements.
• Develop and/or review System Development Life Cycle (SDLC) deliverables, compliant with the site’s standards. Determine the processes and data flow that supports the needs of the project.
• Design & Develop plan for modifications to be made to the system through working with team in development of systems architecture, specifications, controls strategies, sequence of operations through all stages.

Requirements

• Experience in a similar role, ideally in the Pharmaceutical and/or Biotechnology industry.
• Emerson DeltaV DCS system experience and DeltaV Batch experience required
• Experience in the Designing and commissioning of DeltaV DCS project for GMP manufacturing site.
• Technical proficiency on controls systems including familiarity with control panels, networking, panel/field wiring and PLC control systems.
• Through understanding of Batch s88 standards (CM, EM, Phases, Recipes, Units etc)
• Familiarity with GAMP lifecycle and quality management processes employed in the pharmaceutical sector
• Ability to work well in a team environment
• Supervise and conduct system testing Factory Acceptance Test (FAT)
• Excellent computer skills, proficient in the use of the following Microsoft tools: Excel, SharePoint, Word and PowerPoint.
• Excellent communication and customer orientation skills
• Good analytical & problem-solving skills
• Ensure project Automation Strategy is followed.

Mon to Fri - 8am to 5.30pm

Responsibilities:

- Responsible for daily basis service work and handling new installation projects and testing commissions for air-cooled and water-cooled chiller.

- Routine servicing of Commercial Chillers (Air-cooled & Water-cooled chillers) onsite.

- Routine duties includes maintenance, troubleshooting and repair to commercial chillers, AHU, FCU, VRV CRAC, VRV Systems, including tear down and rebuild (overhauling).

- Able to read specifications and drawings by contractors.

- Inspecting and testing systems to verify system compliance with plans and specifications and to detect/locate malfunctions.

- Organise and keep up with records and report all faults, deficiencies and other unusual occurrences, as well as the time and materials expended on work orders.

- Responsible for adjusting system controls to settings recommended by manufacturer to balance systems handling for all types of refrigerant.

Requirements:

- Diploma/Degree in Mechanical Engineering

- Minimum 2 years of technical experience with knowledge in air-conditioning, Chiller, ACMV or HVAC systems

- Resourceful with good analytical and interpersonal skills

- Strong communication skills

- Good team player with ability to lead and multi-task

- Possess Class 3 driving license will be an added advantage

Job summary:
Experience in marine and oll & gas sector.
Responsible for the assigned customer account, to ensure all product quality, process quality andsystem quality to conform with customers' specifications and internal quality system reauirements

Roles & Responsibilities:
1.To liaise with Customer Quality representatives on all Quality matters.
2.Lead the investigation on all Customer Quality Feedback, Complaints and CAR with internal cross.functional team for comprehensive root cause failure analysis and ensure closure with effectiveimplementation of corrective actions and preventive actions.
3. Monitor product quality performance and generate quality reports; chair monthly product qualityimprovement meetings to reduce the customer reject and field return rate for continual improvement!Identify Quality lmprovement projects and initiatives to drive Customer Satisfaction with Quality.
4.Establish with customer representative and internal team on New Product Quality plans, procedureswork instruction for overall auality control and coordinate implementatilon and maintenance of suchplans, procedures or instructions; conduct quality training/ cross training for QA inspectors.
5.Audit customer fabrication line for compliance to applicable standards and procedures in QMs andEMS

58 RECRUITMENT PTE. LTD. 19C9772 67026282

Responsibilities

• Troubleshoot and provide solutions for MES & ERP problems in recipe execution and recipe authoring.
• Liaise with QA to provide approved change control documentation for all MES system changes.
• Design, create, write and execute to a high-quality standard, test and validation protocols, risk assessments, and system documentation.
• Design, create, write and/or make all required changes to MES & ERP Recipes, worksheets, equipment and material spec's including phase transition logic to a high-quality standard.
• Design, create, write and/or make all required changes to ensure cleaning, equipment and product procedures are aligned to MES processes and vice versa.
• Design, create, write and provide training for all other site personnel on their related MES roles and arrange system access.
• Participate in MES knowledge exchanges, MES Governance meetings and manage issues, work-around and fixes identified.
• Work closely with IT regarding upgrades, patching, hardware support, security and system access and provide technical expertise in implementing upgrades and patching.
• Liaise with Global MES on required system improvements.
• Provide support to other MES system users as required to ensure business continuity.
• Participate in MES projects from initiation to ensure MES system or hardware requirements are taken into consideration.
• Ensure maintenance/replacement of MES hardware, printers, scales, scanners and bar-code labelers. Review for upgrades periodically.
• Keep other MES Team Members up to date on MES changes Documentation of all activities in line with cGMP requirements.
• Cross training within the team and training of new team members.
• Participation in continuous improvement programs to implement improvements in the quality, safety, environmental and production systems.
• Adheres to and supports all health and safety standards, procedures and policies.

Requirements

• Werum PAS-X/Aspen/Syncade, Siemens MES (Camstar / Opcenter / Simatic IT) product hands-on experience for full application configurations including interface with SAP and automation systems
• In-depth of knowledge of Pharmaceutical business process (Chemicals (W&D, Solid bulk Mfg., packaging and other unit operations), Bio Pharma processes)
• Creation of business process flow diagram
• Master Batch Record creation in Werum PAS-X
• Knowledge on Industry Standards S88 and ISA S95
• Experience working on projects in the pharmaceutical and/or biotechnology industries knowledge of GAMP lifecycle and quality management processes employed in the pharmaceutical sector Excellent communication skills and collaborative with team members and external groups

Responsibilities

• Troubleshoot and provide solutions for MES & ERP problems in recipe execution and recipe authoring.
• Liaise with QA to provide approved change control documentation for all MES system changes.
• Design, create, write and execute to a high-quality standard, test and validation protocols, risk assessments, and system documentation.
• Design, create, write and/or make all required changes to MES & ERP Recipes, worksheets, equipment and material spec's including phase transition logic to a high-quality standard.
• Design, create, write and/or make all required changes to ensure cleaning, equipment and product procedures are aligned to MES processes and vice versa.
• Design, create, write and provide training for all other site personnel on their related MES roles and arrange system access.
• Participate in MES knowledge exchanges, MES Governance meetings and manage issues, work-around and fixes identified.
• Work closely with IT regarding upgrades, patching, hardware support, security and system access and provide technical expertise in implementing upgrades and patching.
• Liaise with Global MES on required system improvements.
• Provide support to other MES system users as required to ensure business continuity.
• Participate in MES projects from initiation to ensure MES system or hardware requirements are taken into consideration.
• Ensure maintenance/replacement of MES hardware, printers, scales, scanners and bar-code labelers. Review for upgrades periodically.
• Keep other MES Team Members up to date on MES changes Documentation of all activities in line with cGMP requirements.
• Cross training within the team and training of new team members.
• Participation in continuous improvement programs to implement improvements in the quality, safety, environmental and production systems.
• Adheres to and supports all health and safety standards, procedures and policies.

Requirements

• Werum PAS-X/Aspen/Syncade, Siemens MES (Camstar / Opcenter / Simatic IT) product hands-on experience for full application configurations including interface with SAP and automation systems
• In-depth of knowledge of Pharmaceutical business process (Chemicals (W&D, Solid bulk Mfg., packaging and other unit operations), Bio Pharma processes)
• Creation of business process flow diagram
• Master Batch Record creation in Werum PAS-X
• Knowledge on Industry Standards S88 and ISA S95
• Experience working on projects in the pharmaceutical and/or biotechnology industries knowledge of GAMP lifecycle and quality management processes employed in the pharmaceutical sector Excellent communication skills and collaborative with team members and external groups

Mon to Fri: 9am to 5:30pm

Objective:

We are looking for a Field Application Engineer to drive new projects and business pipelines for FY24 growth.

Responsibilities:

• Responsible for pre & post sales requirements of Company’s Power Quality products (preparing technical documents & commercial proposals)

• Provides technical support to distributors and key account customer for troubleshooting, on-site testing and commissioning

• Provides trainings to distributors and customers to enhance their capabilities

• Responsible for design-in (spec-in) of company’s products with the distributor in the appointed territory and market segments, achieve yearly design-in targets

• Lookout for opportunities to cross out competitor part

• Coordinate PQ Application and On-site Measurement Services in line with the company strategy

• Maintains good relationship with both end-users, local distributors, external test laboratories and build customer loyalty through field visits

• Maintenance of existing customers base and achieve development of new potential customers.

• Effective use of CRM/CAS system to record key activities, including customer visit/call reports and opportunities

• Able to communicate and work well with internal departments.

• Any other responsibilities as assigned by the Strategic Account Manager or/and Sales Manager

Job Requirements:

• Possess fundamental PQ Harmonic knowledge and application.

• Basic knowledge of EMC / EMI compliance is a plus

• Bachelor’s degree or equivalent in Electrical/Electronics/Mechatronics Engineering or other relevant majors

• Prefer minimum 3 years technical experience in the field of industrial products

• Able to operate common test equipment like voltage meter, clamp meter, oscilloscope, analyzer, etc.

• Good interpersonal and communication skills

• Well-versed in basic MS Office tools (eg. Word, Excel) and SAP (preferred)

• Interpersonal savvy

• Good follow up and consultative approach attitude

• Able to work independently and resourceful

What we offer:

• Attractive remuneration and incentive package

• Annual leave, medical welfare and insurance

• Provide opportunities for career advancement within the company

C2D Solutions Pte Ltd is Hiring!!!

Only Singaporean and SPR need to apply!

Web: www.c2d.com.sg

Tel: +65 6392 2949

Job Description: Mechanical & Electrical Engineer

Company Overview

• C2D Solutions is a premium holistic solutions provider with strong knowledge and experience in vast fields of engineering. As a trusted consultant, we aim to provide invaluable integrated solutions during design and optimisation.
• We were established in 2012 and operates as a licensed corporation under the Professional Engineers Act. We provide holistic solutions in the field of Fire Safety Engineering, M&E Consultancy, Computational Engineering Solutions.
• We have a team of dedicated Professional Engineers, Fire Safety Engineers and supporting Engineers to ensure first-rate engineering solutions for our clients.
• We have grown over the years and are continuously increasing our market presence and are seeking like-minded individuals to join our team as a Mechanical & Electrical Engineer.

Job Responsibilities:

• Design and commissioning of building mechanical & electrical systems including, fire protection, air-conditioning & mechanical ventilation, smoke control systems, power distribution systems, lighting systems, etc.
• Perform Computational Fluid Dynamics simulations to design & optimize ventilation, pollution control and fire & smoke control systems.
• Understand and familiarize with Singapore authority requirements and adherence to Singapore building code of practices.
• Involve with project site meetings to understand client requirements.
• Participate in Testing & Commissioning phase of completed mechanical & electrical installations.
• Appointed engineers will be attached to Senior Engineers who will provide Internal Training and Supervision.

Why you should apply:

1. We are a progressive company that place equal emphasis on personal and professional growth.
2. Appointed engineers with interest and potential will beoffered sponsorship to continue professional upgrading tofurther their engineering career development.
3. Career development includes the opportunity to register as aProfessional Engineer (PE) and/or Fire Safety Engineer (FSE).
4. Opportunities to work on dynamic and impactful buildingprojects
5. Our projects’ portfolio includes pharmaceutical & semi-conductor manufacturing facilities, air & land infra-structurefacilities, hospitality & conventions facilities, etc.

C2D Solutions is a premium holistic solutions provider with strong knowledge and experience in vast fields of engineering. As a trusted consultant, we aim to provide invaluable integrated solutions during design and optimization. We were establishedin 2012 and operate as a licensed corporation under the Professional Engineers Act. We provide holistic solutions in the field of Fire Safety Engineering, M&E Consultancy, Computational Engineering Solutions. Our team of dedicated Professional Engineers, Fire Safety Engineers and supporting Engineers ensure first-rate engineering solutions for our clients. Since 2012 we have grown exponentially and are continuously increasing our market presence and are seeking like-minded individuals with mechanical engineering or building services degrees to join our team as a Mechanical & Electrical Engineer.

Qualifications:

- 3-5 years working experience in C&S Engineering Consultancy Firm.

- Degree is recognized by Professional Engineers Board (PEB), Singapore.

- Preferably, has passed FEE, examination prescribed by PEB.

- Conversant with latest design codes and authority requirements.

- Competency in design software such as ETABS, SAFE, SAP2000, GSA, IDEA StatiCa, Tekla etc.

- Able to work independently to support the QP and directors.

- A team player and to carry out tasks/duties in a positive and dignified manner

Responsibilities:

- Responsible for the execution of civil and structural design involving the preparation of calculations, drawings and detailing.

- Assist in producing tender specifications and design requirements for calling of tender contracts.

- Attend project/technical meetings with authorities, developers and contractors.

- Involve in project planning, implementation and close monitoring of projects.

- Project coordination including submission to local authorities and liaison during the construction stage.

- Liaise with clients, consultants and authorities on technical matters.

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

We are a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing if navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

THE ROLE:

To validate and characterize the most cut edge SerDes design including PAM4 224G transceiver on the most advance technology node. Using the latest measuring equipment the semiconductor industry has to offer to benchmark AMD’s SerDes against the challenging industry standard.

THE PERSON:

We are looking for a meticulous and motivated engineer to join the validation teams.

KEY RESPONSIBILITIES:

• Post Silicon Validation of high speed SerDes
• Understand the industry requirements and specification for high speed IO
• Develop validation methodology to validate new industry standard and requirements.
• Characterize the latest SerDes design
• SerDes debug with designers on Silicon
• Tuned the latest design to performance at the most optimum setting
• Generate specification base on measured results
• Work with remote teams to co-ordinate distributed task.
• Support FAE on customer’s issues relating to high Speed Ios

PREFERRED EXPERIENCE:

• Experience in high speed IO SerDes post-silicon validation.
• In-depth knowledge of the latest industry standards such as PCIe, Display Port, JESD, SDI, OIF-CEI-11G/25G/56G/112G-VSR/SR/MR/LR, IEEE 802.3 KR/CR/CAUI/GAUI etc.
• Strong programming/scripting skills coding languages such as Python, C/C++, TCL for firmware development, test methodology development and test automation
• Extensive experience with common lab equipment, including BERT, analyzers, oscilloscopes, PNA/VNA etc
• Knowledge of SerDes general architectures and link level system analysis
• Good understanding in transmission line theory and electromagnetic theory
• Experience in system level serial link analysis and simulation, system performance optimization and standard/architecture level study using tools such as Matlab, ADS etc.

ACADEMIC CREDENTIALS:

• Bachelors/Masters degree in Electrical/Electronics Engineering

LOCATION:

Singapore

On your day to day:

• Handle multiple projects and provide network design and deployment support from project initiation to closure.
• Follow Citi network standards and configuration templates to prepare Network Design Documents (NDD) and submit for review and approval. Create Build Packages that includes implementation plans, test plans and network changes.
• Oversee the deployment of Build Packages on the corporate data network. Implement network changes during the allowed weekend green zone window.
• For some large/complex projects, you will be required to represent network domain in a virtual team and effectively communicate and liaise with business/technical stream owners.
• Assist with knowledge transfer of new products to internal teams.
• Assist in the development of & implementation of processes to allow repeatable designs with the view of provisioning automation and efficiencies.
• Prepare and submit all required project documentations for audit purpose & project closure

Qualifications:

• Proven experience (5+ years) working with Cisco and Arista network devices (routers and switches).
• Minimum of at least CCNP or equivalent.
• Strong working knowledge of following routing protocols: BGP, OSPF.
• Experience on WAN technology, e.g. Metro Ethernet, MPLS. VPLS, IPLC etc.
• Preferable with working experience on using Multicast in a Cisco/Arista environment.
• Preferable with working experience in large financial or banking network operation/implementation team.
• Ability to effectively communicate to internal clients through all available mediums (verbal, listening, writing, presenting).
• Willing to work during weekends for implementation of network changes.
• Willing to work for extended working hours when needed.
• PC Literate (Word, Excel, PowerPoint)

• Develop test programs for Digital, PMIC, RF & Mixed Signal products on automated test equipment.
• Liaise closely with the design engineers on the first silicon debug, device characterization, test program bring up and production release activities.
• Troubleshoot digital vectors (JTAG/SCAN/ATPG / Functional / Mbist) and Device characterization across PVT (Process, Voltage and Temperature).

Requirements:

• Diploma in Electronics/Electrical/Communication Engineering or equivalent.
• At least 3 years of developing SOC programs from NPI to volume ramp stage experience with Advantest V93k or Teradyne Uflex/Iflex.
• Proficient in Java, C/C++, Visual Basic, Perl, Python

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Role:APPLICATION SECURITY ENGINEER

JD:

RESPONSIBILITY

• Conduct white box and black box security scan, harden systems and application platform

• Develop scripts to automate systems hardening and security vulnerability assessment

• Maintain security test suite in QA build

• Optimize system performance and reliability to enhance user experience.

• Conduct code reviews to ensure code quality and securityWork with Software Quality Engineer on system integration testing

• Work with Software Quality Engineer to manage defect life cycle

• Work with Software Quality Engineer to improve testing processes and tools

• Take on secondary role as an Application Performance Engineer or Software Quality Engineer

• Collaborate with cross-functional teams to enhance security in the development pipeline

EXPERIENCE AND SKILLS NEEDED

• Min 2 years of experience in application security vulnerability assessment, analysis and remediation

• Experience in agile development environment will be an added advantage

• Experience with continuous integration and continuous delivery, using Gitlab or other similar tools will be an added advantage

• Experience in public cloud providers such as GPC, GCC (i.e. AWS, Azure,Google Cloud) will be an added advantage

• Experience with OWASP ZAP, Burp Suite, SQL Map, Nessus, Nmap, Fortify WebInspect or equivalence will be an added advantage.

• Experience with Checkmarx or equivalence will be an added advantage

• Certified Secure Software Lifecycle Professional (CSSLP), Certified Ethical Hacker (CEH), Certified Information Systems Security Professional (CISSP) or equivalence will be an added advantage

• Experience using Dynamic Application Security Testing (DAST) Tools such as ZAP, Burp Suite, Micro focus WebInspect or equivalence will be an added advantage.

• Experience using Static Application Security Testing (SAST) Tools such as Micro focus Fortify, Checkmarx or equivalence will be an added advantage.

• Security testing-specific certifications such as Offensive Security Certified Professional (OSCP), GIAC Certified Penetration Tester (GPEN), GIAC Web Application Penetration Tester (GWAPT), CREST Registered Penetration Tester (CRT) or equivalence will be an added advantage.

• Risk management-specific certifications such as Certified Secure Software Lifecycle Professional (CSSLP), Certified Information Systems Security Professional (CISSP) or equivalence will be an added advantage

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.

IT INFRASTRUCTURE ENGINEER RESPONSIBILITY:

The IT Infrastructure Engineer is responsible for the implementation, operation and maintenance of application infrastructure services that meet application requirements and business needs, and is aligned to Government’s policies, standards and procedures. The IT Infrastructure Engineer will get to:

• Engage stakeholders to translate business requirement into application infrastructure design and services to meet the intended availability, capacity, resiliency, security and continuity requirements;

• Forecast budget needed to support the project initiatives and maintenance contracts;

• Work with service providers to design, develop, deploy and configure IT application infrastructure projects to meet confidentiality, availability and data integrity needs;

• Ensure Agency’s Technical Architecture and application infrastructure are in compliance with IM8 and Agency’s IT Policies and Standards;

• Manage day-to-day delivery and support of application infrastructure services; and

• Collaborate with other government agencies and central services teams to facilitate and deliver government-wide application services.

EXPERIENCE AND SKILLS NEEDED

• Degree or Diploma in IT, computer or related disciplines

• Minimum 3 years of working experience for Engineer and 5 years of working experience for Senior Engineer • Hands-on experience in at least 1 full project development life cycles for Engineer and 3 full project development life cycles for Senior Engineer

• Ability to take a broad, strategic perspective as well as drill down to understand business needs and challenges

• Results and customer oriented mind-set

• Team player with strong organization and people handling skills

• Excellent communication skills, both oral and written, with the ability to pitch ideas and influence stakeholders

• ITIL v3 Foundation certification preferred

Role: IT INFRASTRUCTURE ENGINEER

RESPONSIBILITY

The IT Infrastructure Engineer is responsible for the implementation, operation and maintenance of application infrastructure services that meet application requirements and business needs, and is aligned to Government’s policies, standards and procedures.

The IT Infrastructure Engineer will get to:

• Engage stakeholders to translate business requirement into application infrastructure design and services to meet the intended availability, capacity, resiliency, security and continuity requirements;

• Forecast budget needed to support the project initiatives and maintenance contracts;

• Work with service providers to design, develop, deploy and configure IT application infrastructure projects to meet confidentiality, availability and data integrity needs;

• Ensure Agency’s Technical Architecture and application infrastructure are in compliance with IM8 and Agency’s IT Policies and Standards; • Manage day-to-day delivery and support of application infrastructure services; and

• Collaborate with other government agencies and central services teams to facilitate and deliver government-wide application services.

EXPERIENCE AND SKILLS NEEDED

• Degree or Diploma in IT, computer or related disciplines

• Minimum 3 years of working experience for Engineer

• Hands-on experience in at least 1 full project development life cycles for Engineer and 3 full project development life cycles for Senior Engineer

• Ability to take a broad, strategic perspective as well as drill down to understand business needs and challenges

• Results and customer oriented mind-set

• Team player with strong organization and people handling skills

• Excellent communication skills, both oral and written, with the ability to pitch ideas and influence stakeholders

• ITIL v3 Foundation certification preferred

Requirements

As a Data Science Engineer at Micron, you will employ techniques and theories drawn from areas of mathematics, statistics, semiconductor physics, materials science, and information technology to uncover patterns in data from which predictive models, actionable insights, and solutions can be developed.

You will interact with experienced Data Scientists, Data Engineers, Business Areas Engineers, and UX teams to identify questions and issues for data analysis projects and improvement of existing tools. In this position, you will help develop software programs, algorithms and/or automated processes to cleanse, integrate, and evaluate large datasets from multiple disparate sources. There will be significant opportunities to perform exploratory and new solution development activities.

Responsibilities include, but not limited to:

• Strong desire to grow a career as a Data Scientist in highly automated industrial manufacturing doing analysis and machine learning on terabytes and petabytes of diverse datasets.
• Experience in the areas: statistical modeling, feature extraction and analysis, supervised/unsupervised/semi-supervised learning. Exposure to the semiconductor industry is a plus but not a requirement.
• Ability to extract data from different databases via SQL and other query languages and applying data cleansing, outlier identification, and missing data techniques.
• Strong software development skills.
• Strong verbal and written communication skills.
• Experience with or desire to learn:
• Machine learning and other advanced analytical methods
• Fluency in Python and/or R
• pySpark and/or SparkR and/or SparklyR
• Hadoop (Hive, Spark, HBase)
• Teradata and/or another SQL databases
• Tensorflow, and/or other statistical software including scripting capability for automating analyses
• SSIS, ETL
• Javascript, AngularJS 2.0, Tableau
• Experience working with time-series data, images, semi-supervised learning, and data with frequently changing distributions is a plus
• Experience working with Manufacturing Execution Systems (MES) is a plus
• Existing papers from CVPR, NIPS, ICML, KDD, and other key conferences are plus, but this is not a research position

Designs, develops and programs methods, processes, and systems to consolidate and analyze unstructured, diverse “big data” sources to generate actionable insights and solutions for client services and product enhancement. Interacts with product and service teams to identify questions and issues for data analysis and experiments. Develops and codes software programs, algorithms and automated processes to cleanse, integrate and evaluate large datasets from multiple disparate sources. Identifies meaningful insights from large data and metadata sources; interprets and communicates insights and findings from analysis and experiments to product, service, and business managers.

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

Summary:

The successful candidate will play a critical role in supporting the platform layer that centralizes and abstracts infrastructure challenges away from application teams. The role focuses on providing powerful and safe tools to develop and deploy Generative AI (GenAI) use cases in a secure and consistent manner.

Key Responsibilities:

· Collaborate with developers and business users to ensure the platform delivers a good Developer Experience (DX) while meeting the AI needs of the users.

· Build and enhance platform capabilities to support scalable, reliable, and high-performance applications.

· Contribute to frontend and backend development with a focus on quality and maintainability.

· Design and develop SDKs and tools to simplify platform integration.

· Develop and maintain CI/CD pipelines to ensure automated testing and efficient delivery.

· Work on infrastructure provisioning and management using tools like Terraform, Kubernetes, and AWS.

· Collaborate closely with cross-functional teams to improve platform capabilities and resolve technical challenges.

· Demonstrate a passion for innovation and continually explore new technologies to improve the platform ecosystem.

Mandatory Skills:

· Possess a degree in a Science, Technology, Engineering, or Mathematics (STEM) related discipline.

· Minimum 3 years of relevant experience in software development.

· Hands-on technical skills with strong competencies in 2 or more of the following areas:

· Frontend: ReactJS (preferred) or equivalent frameworks.

· Backend: Python (FastAPI - preferred) and/or NodeJS (NextJS - good to have).

· SDK Development: Python (Poetry).

· Infrastructure/Platform: Terraform, AWS Cloud, Kubernetes (K8s) or equivalent container technologies.

· Hands-on experience in system/software design and automated software testing, particularly with tools like GitHub Actions or equivalent CI/CD technologies.

Skillsets (Good to Have):

· Experience in AI/ML platform engineering will be an added advantage.

· Hands-on experience with Agile software development methodologies and practices such as:

· Test-Driven Development (TDD)

· Continuous Integration/Continuous Delivery (CI/CD)

· Scrum and Kanban methodologies

· Demonstrates strong teamwork capabilities, independence, and a willingness to learn.

· Strong analytical, problem-solving, communication, and interpersonal skills.

· Passionate about understanding business requirements and leveraging technology to transform or improve current processes.

· Familiar with and eager to learn about current and emerging technology landscapes.