• Design and develop ATE (Automated Test Equipment) programs for new products, covering both production and characterization testing.
• Engage in hands-on testing debugging, conduct RMA analysis, and enhance testing solutions for both hardware and software.
• Develop a test plan for the product, including scheduling, resource needs, and overseeing project tracking and execution.

Requirements:

• Degree in Electrical/Electronics Engineering
• At least 3 years of leadership experience in ATE test program development.
• Proficient in C++/ VB, ATE testers and Chroma.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Design and develop ATE (Automated Test Equipment) programs for new products, covering both production and characterization testing.
• Engage in hands-on testing debugging, conduct RMA analysis, and enhance testing solutions for both hardware and software.
• Develop a test plan for the product, including scheduling, resource needs, and overseeing project tracking and execution.

Requirements:

• Degree in Electrical/Electronics Engineering
• At least 3 years of leadership experience in ATE test program development.
• Proficient in C++/ VB, ATE testers and Chroma.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Design and develop ATE (Automated Test Equipment) programs for new products, covering both production and characterization testing.
• Engage in hands-on testing debugging, conduct RMA analysis, and enhance testing solutions for both hardware and software.
• Develop a test plan for the product, including scheduling, resource needs, and overseeing project tracking and execution.

Requirements:

• Degree in Electrical/Electronics Engineering
• At least 3 years of leadership experience in ATE test program development.
• Proficient in C++/ VB, ATE testers and Chroma.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client, one of Asia-Pacific’s leading organizations is looking for:

Test Analyst

Responsibilities:

• Test schedule planning, test scenario creation, test environment preparation, data preparation, etc.
• UAT issue management (managing tickets) and tracking till solving them
• UAT progress monitoring and reviewing the results
• Regular reporting to Program Manager and Area PM

Requirements:

• Experience in planning UAT such as creating UAT plans, developing UAT schedule, bridging communication among multiple stakeholders, etc.
• Experience in executing UAT such as monitoring progress, UAT issue solving, test result validation, etc.
• Experience in core banking system projects including accounting system from user side

-----------------------------------------------------------------------------------------------------

Interested applicants can also email CV at [email protected] (for faster processing, please state the exact job/position title applied “Test Analyst”)

Only shortlisted candidates will be notified.

-----------------------------------------------------------------------------------------------------

EA License Number: 10C3636
EA Personnel Name: Vimmi Baunthiyal
EA Personnel Registration Number: R1543982

Responsibilities

· Assist Test Engineers in leading and supporting Test Technicians for all test-related activities for Server & Rack products in production.

· Support PXE Server configuration and basic troubleshooting for test processes.

· Perform and maintain the server run-in, burn-in, and power test processes under the guidance of Test Engineers.

· Test, analyze, and perform preliminary troubleshooting of production failures; escalate unresolved issues to Test Engineers.

· Liaise with Test Engineers to implement and maintain test programs and configurations.

· Participate in Kaizen and continuous improvement activities to enhance processes and efficiency.

· Update and maintain test records and documentation, including Working Instructions and master lists.

· Provide basic training and mentoring to Test Technicians on test procedures and troubleshooting techniques.

· Support New Product Introduction (NPI) processes and assist in production ramp-up.

· Participate in ISO-related activities (implementation and maintenance).

Requirements

· Diploma in Engineering / Nitec with 2–4 years of relevant experience in testing and debugging in a manufacturing environment.

· Good understanding of test methods, processes, and concepts.

· Basic knowledge of programming and debugging skills.

· Ability to collaborate effectively with peers, engineers, and supervisors.

· Strong organizational skills and the ability to multitask under pressure.

· Willingness to perform shift work as required.

· Proactive mindset and willingness to learn and support continuous improvements.

Compliance with RBA standards

• Design and develop ATE (Automated Test Equipment) programs for new products, covering both production and characterization testing.
• Engage in hands-on testing debugging, conduct RMA analysis, and enhance testing solutions for both hardware and software.
• Develop a test plan for the product, including scheduling, resource needs, and overseeing project tracking and execution.

Requirements:

• Degree in Electrical/Electronics Engineering
• At least 3 years of leadership experience in ATE test program development.
• Proficient in C++/ VB, ATE testers and Chroma.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities:

Understand and analyze testing requirements to prepare test plan and test scripts.

pdate and produce automation test script according to the business requirements.

Perform test execution, capturing and analyzing test results and work with respective teams to resolve the open defect etc.

Prepare the document and produce daily activities report.

Provides guidance and be hands-on to testing activities.

Coordinate and liaise with relevant parties for project related items.

Maintain appropriate security controls for documents.

Requirements:

Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Master's Degree, Computer Science/Information Technology or equivalent.

At least 1 year of experience in Software Automation Testing.

Required skills: Selenium, TOSCA or any other Automation Testing Tools with relevant scripting language.

Proficient in MS Excel, Word and PowerPoint.

Proficient in Java and JavaScript.

Fresh Graduates are welcomed to apply.

By submitting your curriculum vitae or personal data to us in connection with your job application, you are deemed to have given your consent to GienTech Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data in accordance with the Personal Data Protection Act (“PDPA”). If you wish to withdraw your consent, please drop us an email to let us know.

• Design and develop ATE (Automated Test Equipment) programs for new products, covering both production and characterization testing.
• Engage in hands-on testing debugging, conduct RMA analysis, and enhance testing solutions for both hardware and software.
• Develop a test plan for the product, including scheduling, resource needs, and overseeing project tracking and execution.

Requirements:

• Degree in Electrical/Electronics Engineering
• At least 3 years of leadership experience in ATE test program development.
• Proficient in C++/ VB, ATE testers and Chroma.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

As an Automation Engineer, you will be enabling factory automation solutions to aid backend manufacturing goals on cycle time, inventory, quality and productivity. You are expected to assimilate core expertise on mechanical or electrical design, sub-components, industry best practices, safety requirements. You must collaborate with network teams - site automation, central/ site PEE, procurement, safety EHS - for surfacing opportunities, selecting solution providers, standardizing design, reviewing safety standards. You will build strategic partnership with automation vendors and drive their roadmap to align to Micron needs.

Responsibilities and Tasks
Establish standards to enable automation solutions
• Standardize mechanical and electrical design, sub-assemblies, process control & vision solutions
• Ensure supplier compliance to safety & ergonomic standards, both SEMI and country specific codes
• Standardize design for WIP carriers - FOUPS, Cassette, Magazine, JEDEC tray, PCB Racks etc
• Develop and review process tool automation requirements (TAR) catered to AMHS & Stocker interfaces
• Augment factory tool layout standards catered to AMHS, stockers and ASRS requirements
• Publish Design for Automation guidelines on new products

Review opportunities and build roadmap on global factory automation
• Approve design review on automation solutions
• Ensure standardization on designs across the network based on BKMs or prototyping experience
• Review technical procurement specification (Doc2/TAR) provided to vendors
• Establish & review ROI analysis methodology

Strategic partnership with automation solution provider
• Performs research and survey on industrial best practices and automation direction
• Leverage supplier technology roadmap to align with Micron automation needs
• Develop and drive innovation that reaps significant bottom-line benefits
• Provide models for cost and lead-time to drive effective negotiation with suppliers

Establish performance KPIs for automation solution at manufacturing network
• Ensure solutions meet the requirements on payback analysis published
• Create & publish metrics related to AMHS and Stocker performance
Review and drive system performance improvement through CIP program

Requirements

• Bachelor's Degree in Engineering or Science in fields such as mechanical, electrical, industrial, computer or automation.
• Minimum 3 years working experience in engineering or automation field
• Strong verbal and communication skills, team player
• Experience in managing automation project from beginning to end is advantageous

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

The Opportunity

• Adecco is partnering with a multinational corporation Semiconductor company to search for an SSD Test Engineer
• Focus: Troubleshooting, Testing and Analyze SSD/HDD Product Issues
• Office location: Singapore
• Working hours: 5 days’ work (Monday-Friday) Office hours
• This role is starting off as contract position

The Talent

• Bachelor’s degree in computer/electrical/electronic engineering would be an advantage
• Experience with OS installation, assembly and debug of laptop/desktop systems would be an advantage
• Experience with using Oscilloscope and Bus Analyzer will be beneficial
• Basic working knowledge with Windows and/or Linux OS
• Comfortable working in an ESD-protected lab environment, server room, loud noise environment
• Analytical skills and diagnose to find the root cause and apply corrective actions
• Knowledge of system storage and relationship to platform peripherals would be added advantage
• Knowledge on SSD will be beneficial

MAIN FUNCTIONS

Provide support in validating the new SSD under developmPerform functional testing on SSD through execution of tests (both automated and manual)

• Perform initial failure analysis and work with Validation engineers to resolve test failures
• Modification of functional test scripts to achieve targeted test coverage
• Perform debug and evaluation towards resolution of issues with Firmware engineers.
• Participate in setting up of test environment and servers in preparation for validation.
• Tabulate test results and generate report for continuous firmware health monitoring.

Next Step

• We could contact you in the soonest time if you directly send your resume to: [email protected]
• Email Topic: Apply: SSD Test Engineer
• We regret to inform that only shortlisted candidates will be contacted

Ling Kai Hoe

EA Licence Number: 91C2918

Personnel Registration Number: R22106166

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Senior Systems Test Engineer, R&D is responsible for designing, building, and testing complex or large-scale, systems, ensuring that the components of the system are integrated and function. The incumbent determines the overall structure of the system, organizes the interaction between components, and evaluates the influence of the environment.

This position is part of the SCIEX Research and Development organization and will be located in Singapore. We empower our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support.

In this role, you will have the opportunity to:

• Perform, lead/or participate in feasibility study, technical design reviews and FMEA in projects where necessary and ensure the mitigations are in place for potential risks. Identify gaps in design proposals, technical capabilities / techniques, and supports the development of strategies to overcome them through DFM & DFS practices.
• Work with research scientists and system engineers to create / execute test plan for breadboard / prototype. Thereafter create and executing specific product verification procedures that would show the suitability and demonstrate quality of the hardware and system elements that are an integral part of a given product.
• Work with research scientists, service engineers, application specialists, external vendors and managers to characterize and troubleshoot product issues. Suggest and verify fixes and corrective and preventive actions. Report verification progress, issues, risks, and requirements compliance status in a timely manner.
• Ensure that SCIEX Systems Engineering Processes are adhered to as per internal documents.
• Provide technical support and investigation to field escalation and drive design improvements.

The essential requirements of the job include:

• M.Sc. / Bachelor's degree in Electrical/Electronic/Mechanical or Systems Engineering.
• Minimum 5 years’ experience in New Product Development environment working with complex integrated systems
• Good knowledge with precision injection and fluidic control, Injections Electrokinetic and / or Electrospray ionization will be an advantage.
• DFSS knowledge and experience is preferred.
• Experience with Mass Spec, HPLC, capillary electrophoresis systems and / or EchoMS. is preferred.

Travel, Motor Vehicle Record & Physical/Environment Requirements:

• The position requires traveling to company locations and customer sites at US, Canada, Europe, Japan, and China. The successful candidate should be prepared to travel up to 20% of the time.

It would be a plus if you also possess previous experience in:

• Technologies such as electrophoresis sodium dodecyl sulfate (CE-SDS), ribonucleic acid (RNA) analysis and / or glycan characterization analysis.
• Capillary isoelectric focusing (cIEF) and imaged capillary isoelectric focusing (icIEF).

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at Danaher Benefits Info.

• Design and develop ATE (Automated Test Equipment) programs for new products, covering both production and characterization testing.
• Engage in hands-on testing debugging, conduct RMA analysis, and enhance testing solutions for both hardware and software.
• Develop a test plan for the product, including scheduling, resource needs, and overseeing project tracking and execution.

Requirements:

• Degree in Electrical/Electronics Engineering
• At least 3 years of leadership experience in ATE test program development.
• Proficient in C++/ VB, ATE testers and Chroma.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

OUR ROLE

As an engineer accountable for the introduction of new product within the Power Transistor sub-Group, you will be mainly responsible for the characterization and qualification of Silicon Carbide Technology based Power MOSFETs along with other technologies in our portfolio like Silicon MOSFETs , IGBTs, GaN HEMT and Power Modules.

The job holder will be involved in characterization laboratory activities such as:

• Testing program development, debug and deployment.
• Product characterization either at wafer and package level.
• Data analysis and reporting.

YOUR SKILLS & EXPERIENCES

• Bachelor/Master’s degree in electrical engineering or close related field.
• 3 to 5 years of direct work experience in a semiconductor environment, preferably as a Test Development Engineer and/or Product Engineer.
• Experience/Knowledge in new product characterization and qualification.
• Understanding of semiconductor physics and power transistors functioning is a must have.
• Knowledge of Wide Band Gap technologies/products such as Silicon Carbide and Gallium Nitride is considered a plus.
• Experience with some industry Automated Test Equipment such as Teradyne (ETS88TH), SPEA (DOT800), ACCOTEST (STS 8200), TESEC (431TT), B1505a.
• Test Software development experience & skills, including knowledge of C/C++ .
• Excellent communication skills, detail-oriented work ethic, ability to work independently with minimum supervision.

• Create ATE (Advantest SmarTest PS1600 & EXA Scale) test program and integrate various test functions in test flow to support First Silicon bring up for wafer and package in NPI phase.
• Perform design validation/characterization/experiment on ATE across process, voltage, frequency and temperature. Evaluate test and product margins, debug and communicate result/yield/analysis to various teams.
• Utilize ATE test tools and other test instrument to debug and analyze the test, design and product issue.
• Support ATE test hardware design (Including build instruction, SI/PI...etc.) and debug.
• Support test time reduction.
• Support proto demands/qualification for IP owner and customer requests.
• Complete test development, test program transfer and product release at respective milestones.
• Initiate, plan and execute multiple projects to achieve target.
• Good knowledge of product engineering, failure analysis and manufacturing test process.
• Interest in learning, researching, sharing and implementing new technology and test methodology.
• Good written/Oral communication skills.
• Result orientated and team work.

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Must have experience in test management activities

Have experience in Banking in Core Banking, Cards, Payments, and overall Digital Banking area Have experience in Company Applications like BWC, RBK, PIB, TMRW, SPL, VSM, REM, ATM, EFT, EAI, WAM, CEP, ALT, EST, SMS – GW, ICH, VSA, GLN, R2W, PIB, IVR, TMRW, IBR, HBK, CRM, BWC, LCG, LGG.

Job Description

• Industry/ Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Assemble & Test Trainee/Assembly & Test Technician
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $2,300 + OT + AWS + VB
• Duration: Permanent

Key Responsibilities

• Acquire skills in assembling, disassembling, testing, and installing products safely and efficiently in the field.
• Ensure proper maintenance and storage of tools and inventories.
• Adhere to established procedures and quality standards in all tasks.
• Maintain accurate records, notably tracking serial numbers for each part and fixture.
• Comply with all safety protocols to maintain a secure working environment.
• Keep the workshop clean and organized.
• Handle additional tasks as assigned.

APPLY NOW!!!

• Minimum 'N' Levels or a National Trade Certificate or equivalent.
• Comfortable working in a warm or factory environment.
• Comfortable with hands-on work and capable of handling physical demanding tasks.
• Inexperienced candidates are welcome to apply as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70176 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Job Description

• Collaborate with project engineer and quality team to design, develop, implement and deploy test processes for new projects.
• Complete test programs for production and manage test programs and control:

- Continuity Test

- 4-Wire Continuity Test

- Functional/Final Test

• Support instrumentation needs including:

- Work with engineers and technicians in development of headers

- Testing jigs

• Develop Acceptance Test Plan per product requirements.
• Develop and document testing procedures per product requirements.
• Engage in both sustaining and NPI support activities
• Identify necessary enhancements to diagnostics deployed in manufacturing and works with quality teams to drive corrective action.
• Ensure headers have sufficient quantity to support the production needs.
• Engage in both sustaining and NPI support activities.
• Perform root cause analysis for any testing related failures.
• Perform other duties/projects as required or assigned from time to time.

Requirements

• Degree in electrical or mechatronics engineering
• Minimum of 2 years experience in Electrical testing, Manufacturing, or similar roles.
• Strong background in testing principles, header & test jig development and processes.
• Design best-in-class performance testing approaches and plans for new projects per customer requirements.
• Must be well versed in electrical know how.
• Able to work well with inter-teams.
• Well versed in CIRIS tester will be an added advantage.

• Develop test programs for Digital, PMIC, RF & Mixed Signal products on automated test equipment.
• Liaise closely with the design engineers on the first silicon debug, device characterization, test program bring up and production release activities.
• Troubleshoot digital vectors (JTAG/SCAN/ATPG / Functional / Mbist) and Device characterization across PVT (Process, Voltage and Temperature).

Requirements:

• Diploma in Electronics/Electrical/Communication Engineering or equivalent.
• At least 3 years of developing SOC programs from NPI to volume ramp stage experience with Advantest V93k or Teradyne Uflex/Iflex.
• Proficient in Java, C/C++, Visual Basic, Perl, Python

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Job Description

Role: Senior ETL Test Lead

Must Have:

• At least 10+ yrs. quality assurance with exposure/experience in Agile Development environments for DWH/ETL Projects.

• Experience with Query Surge automated testing tools or equivalent automation skills.

• Can write ETL Testing scripts (using SQL/Python)

• Have deep knowledge of Data Warehousing concepts, ETL Process and cloud systems.

• Has strong testing experience with snowflake and on prem Hadoop and Teradata

• Hands on experience of different DBs like, MS SQL Server, Oracle, DB2 etc.

• 2-3 yrs. Of Domain Knowledge for Banking Projects.

• Identifies, communicates, and escalates issues as required

• A team player and self-starter who will work side by side with the development team

• Ability to multi-task, prioritize tasks and quickly adjust in a rapidly changing environment

• Excellent verbal and written communication skills

• Thorough working knowledge of software testing methodologies and the testing life cycle

Good to have:

• Data Migration testing projects for Cloud or on- premise databases.

• Ability to work independently with clients, proactive, and self-managed

• Solicitation and elicitation of client needs and requirements

• Project Management and Software Development Methodologies

• Industry experience in Banking domain is beneficial

• Familiarity/exposure to programming languages and SQL to allow for defect triaging and automation

• Familiarity/exposure to scripting languages used in test automation

EA Number: 11C4879

Responsibilities

· Understand and assess the entire testing life cycle for Product implementation and the core life operating system including end-to-end quality checks.

· To perform user acceptance testing for product launches and product enhancements in accordance to business and operational requirements.

· To ensure proper closure of the entire testing process within the stipulated timeline and to report to the Supervisor of any issues

· To properly document and file testing artefacts and documents into retrievable repositories.

· To prepare test data, monitor testing progress and to log defects.

· Ensure proper closure of the entire testing process within stipulated timelines.

· Escalate gaps and defects or issues discovered during the course of executing the various test scenarios to the Supervisor and/or the Project’s UAT Test Managers and ensure correct reporting, analysis and resolution is obtained from IT.

· Work with Supervisor and/or the Project’s UAT Test Managers and IT in coordinating the execution of the agreed test conditions within the overall planned timeline.

Skills/Requirement

· Polytechnic diploma / University Degree.

· 1 year of working experience with BFSI domain will be an advantage.

· Preference for IT or Business related educational background.

· Strong problem solving and good analytical skills.

· Strong attention to details.

· Good time management and the ability to work to tight time schedules.

· High level of integrity, takes accountability of work and good attitude over teamwork.

· Takes initiative to improve current state of things and adaptable to embrace new changes.

Responsibilities

• Ability to build an automated test solution from scratch using Cypress, Cucumber, and Selenium

• Coordinate with application support (BA and developers) and other tester colleagues on creating the automation test suite

• Prepare good documentation of each automated test process

• Understand the build and deployment process of the project

• Monitor the daily build, test, and deployment pipelines in GitLab

• Handle and build KPI’s for all the jobs

• Build automated test solution for APIs using NUnit

• Propose strategy and solution for data testing

• Prepare tooling and script for automating data regression testing

• Perform and follow-up data regression testing phase as a fully integrated part of the project

• Under the supervision of team head, handle the different integration test phases (planning, test functional coverage and adequacy with functional content) and to manage regression test, integration test on functional test campaign

• Maintain up to date test libraries (test cases)

• Prepare regular reports on test results

Skills/Requirement

• Strong knowledge of JavaScript / TypeScript-based frameworks (such as Angular)

• Strong understanding of OOP concepts

• Should have experience in creating automation framework from scratch using Cypress, Selenium

• Should have experience in the development, enhancement, and maintenance of test automation framework with Cypress, Selenium

• Should have experience in writing test cases using Cucumber

• Good experience in API testing using NUnit

• Must have hands on experience on version control tools like Git

• Must have hands on experience integrating the testing framework in a CI/CD pipeline

• Experience in end-to-end testing process

• Good command of SQL