Responsibilities
Mechanical
- Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
- Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
- Monitors and ensure all mechanical works are carried out according to the latest revision mechanical drawing and complies with contract specification, class requirements and quality management system.
- Arranges coordinate and carry out all the inspection inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
- Performs material equipment incoming are as per Vendor document;
- Verifies tools and equipment used are as per procedures;
- Familiarizes with mechanical inspection process;
- Verifies NDT are done as per approved NDT plan & procedures.
- Verifies preservation are being performed as per preservation plan & procedures.
- Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
- Prepares review and document inspection records, certificates and NDT reports for the submission to relevant party.
- Checks and endorse inspection record prior to issue to customers.
- Ensures subordinates comply with company’s procedure and work instructions.
- Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
- Ensures response timing for NC/CAR are within acceptance period;
- Ensures close-out response for NC/CAR is of sound reasoning and evidence.
- Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
- Implements and compile the monthly key performance indicators (KPI) related to mechanical.
- Verifies mechanical MDR is as per construction prior to release the product back to Singapore.
- Conducts and participate in audit.
Dimension Controller
- Implements dimensional control methods and procedures throughout the fabrication and integration process of the modules to meet the requirements of project specifications and codes.
- Conducts dimensional checking using latest electronic total stations before and after welding of the main deck frame and main column of the modules to ensure that the dimensions are within specifications.
- Reviews design drawings, do necessary best fit calculations, prepare professional dimensional control reports using AutoCAD and get approval by the clients and/or certifying authority.
- Maintains dimensional survey equipment and keep proper documentation of dimensional control reports to meet project requirements and QA/QC audit standards.
- Gives guidance and advice to sub-contractors on how they can increase their productivity.
- Liaises with key stakeholders including Client on the dimensional control methods, acceptance criteria in accordance to project requirements.
- Prepares and compile final dimensional control survey reports as part of the final documentation report.
Electrical
- Takes charge of projects, coordinate and carry out all E& I QA/QC activities for the projects including hazardous zone equipment’s inspection (ATEX/CompEx/IECEx Certified).
- Review and evaluate the drawings as per Classification Societies and Client’s requirement.
- Prepares the QA procedures and get it approved with Classification Societies and Client.
- Witness the testing of HV/LV circuit breaker/starter, neutral earthing resister/fuses and cable megger-ing.
- Coordinates all termination inspection of electrical installation of equipment.
- Preparations of electrical or mechanical completion for equipment.
- Carries out the inspection and testing with Class Surveyors and Class Representatives.
- Ensures all quality control documents are compiled and information’s are handed over for as-build.
- Coordinates daily job activities and provide clear job instructions before delegating the jobs to subordinates.
- Monitors and ensure all work is carried out according to the latest revision electrical drawing and complies with contract specifications, Class requirements and Quality Management System procedures.
- Checks and endorse inspection record prior to issue to Client.
- Ensures subordinates comply with Company’s procedure and work instruction
- Reports any non-conformance (NC) and issue Corrective Action Request (CAR), where necessary.
- Ensures response timing for NC/CAR are within acceptance period;
- Ensures close-out response for NC/CAR is of sound reasoning and evidence.
- Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
- Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
- Implements and compile the monthly Key Performance Indicators (KPI) related to electrical and instrumentation.
- Verifies electrical and instrumentation MDR is as per construction prior to release the product back to Singapore.
- Conducts and participate in audit.
- Performs others duties as signed by the superior(s) from time-to-time.
Coating
- Goods knowledge of all international surface preparation standards, painting/coating application standards, inspection standards, contract, specifications, material technical data sheet, material safety data sheet, documentation etc.
- Witness prequalification of painting system, painter, blaster and adhesion testing subjected for project approval before commencement of painting activities.
- Coordinates in-coming coating materials (e.g. paints, thinners, abrasives etc) conditions, data sheet and batch certificates in accordance with project.
- Inspects correct type of blasting equipment and tools to be used to meet the paint quality according to the paint specification.
- Inspects pre-cleaning or solvent cleaning of surface, metal surface imperfection/defects, surface profile of blast cleaned surface using right inspection tools.
- Assesses surface cleanliness soluble salt contamination on blast-cleaned surface and related test such as pull-off test & reports.
- Able to handle painting inspections in blasting and painting inspection of tank coatings, ship hull painting, and structural items
- Coordinates Request for inspection (RFI) to third party and client paint inspectors on hold point and witness point as per project inspection test plan (ITP).
- ·Able to send enquiries to Paint manufacturers for Painting Specification in accordance with project Requirements and Secure Quality document for painting; Inspection & Test plan, blasting and coating procedure.
- Ensures calibration certificates of painting instruments are valid & available for reference
- Supervises the workplace and workers safety.
- Ensures coating is practical and in accordance with the specified requirements by preparing or reviewing drawings, specification, job instruction and material selection notes etc.
- Reviews Inspection Test Plan (ITP) as per project specification and procedures
- Coordinates and perform Coating inspection of structural, piping and outfit works etc. of the assigned project as per approved ITP.
- To monitor all painting/coating related works and ensure all final products meet project specification requirement.
- Conducts surveillance inspection of surface preparation, paint mixing, WFT, DFT adhesion and curing of paints.
- Coordinates with yard QA/QC team for all quality documentation submission to SCM with the construction completion.
- Conducts onsite audit as per relevant specification and customer requirement.
Structural
- Takes charge of project and carry out all QA functions for the assigned project.
- Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
- Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
- Monitors and ensure all piping works are carried out according to the latest revision piping drawing and complies with contract specification, class requirements and quality management system.
- Coordinates all the inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
- Materials verification done with the specified mill certificates and codes;
- PMI testing on incoming, welder material;
- Verifies material use on sites are approved project materials;
- Familiarizes with piping inspection process;
- Verifies NDT are done as per approved NDT plan & procedures.
- Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
- Ensures project documents including inspection, traceability records, certificates, radiography films, and NDT reports are submitted to relevant party to signing.
- Checks and endorse inspection record prior to issue to customers.
- Ensures subordinates comply with company’s procedure and work instructions.
- Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
- Ensures response timing for NC/CAR are within acceptance period;
- Ensures close-out response for NC/CAR is of sound reasoning and evidence.
- Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
- Implements and compile the monthly key performance indicators (KPI) related to piping.
- Verifies piping MDR is as per construction prior to release the product back to Singapore.
- Conducts and participate in audit.
- Performs others duties as signed by the superior(s) from time-to-time.
Requirements
- Degree or Diploma in Mechanical Engineering / Marine and Offshore or equivalent.
- Minimum 5 years of relevant work experiences in shipbuilding / oil and gas / offshore projects as QA/QC Structural Inspector.
- Working in FPSO/FSO/FPU Project will be added advantage.
- Shall be familiar with AWS D1.1, API 2X, ASME Section II, and ABS Class rules.
- Certified Welding Inspector (AWS CWI or CSWIP 3.1)
- NDT Level II in RT/UT/MPI/PT
Our Address and Working Hours:
Seatrium Limited
(Admiralty Yard)
60 Admiralty Road West, Singapore 759947
(Transport provided from Sembawang MRT)
Mon - Fri: 8am - 5:30pm
Seatrium Limited
(Tuas Boulevard Yard)
80 Tuas South Boulevard, Singapore 637051
(Islandwide transport provided)
Mon - Thu: 7:30am - 5:15pm
Fri: 7:30am - 4:15pm
Seatrium Limited
(Pioneer Yard)
50 Gul Road, Singapore 629353
(Islandwide transport provided)
Mon - Fri: 7:30am - 5:30pm
Seatrium Limited
(Tuas Yard)
Pioneer Sector 1, Singapore 628437
(Islandwide transport provided)
Mon - Fri: 7:30am - 5:30pm
Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.
We regret that only shortlisted candidates will be notified.
Please note that your personal data disclosed to Seatrium Ltd and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.
