Total 1,908 construction engineer job vacancies in Art / Design / Entertainment category in Singapore

Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples, mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 6 years of local working experience OR
• Diploma in Architecture with minimum 8 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

Job scope:

-Propose ideas on interior designs and space planning

-Produce interior design drawings, 3D drawings & quotations

-Work closely with client, contractors & suppliers to ensure quality project completion & timeline set are met

-Involve in site measurement, layout plan & selection of materials

-Other tasks as assigned by company's director

Requirements:

-Specialised in interior design or equivalent

-Able to communicate & write in both English & Mandarin in order to communicate with our mandarin speaking subcontractors & customers

-Knowledge in Autocad, sketchup, 3D max, Vray, photoshop, excel

-Responsible, committed and have a good working attitude

-Able to work independently and be a team player at the same time

-Able to start work at short notice

-Individuals with or without experience are welcome to apply, training will be provided

Job Requirements

• Leading a Team of Tankage Design Engineers to execute the Tankage Design Engineering of the Project which includes design of Fixed Roof Tank / Floating Roof Tank as per API 650, Low Pressure Tank as per API 620, Spherical Tank and Bullets as per ASME Section VIII & Cryogenic Double Wall Tanks as per API 620 & API 625.
• Review & Checking of Tankage Design Documents such as Design Calculation for Tank, Finite Element Analysis, Tank Data Sheets, Tankage Material specification, Tankage Fabrication Drawings & ensure Compliance to API 650, API 620, API 625, ASME Sec VIII, AP 2000 and all Applicable Codes & Standards.
• Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies.
• Preparation, Monitoring and Control Engineering Document Control List and expedite for delay / approvals / resolution of open issues.
• Review and ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team
• Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.
• Coordination with PMC and Construction Coordination.
• Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works.
• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.
• Preparation of Technical Specification for Works and Technical Bid Evaluation
• Preparation and Compliance for Engineering Audit Requirements.
• Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.
• Technical assistance to construction activities and attending to Site Queries.
• Preparation of Foundation Loading Data.
• Generate 2D construction drawings and data sheet.
• Preparation of purchase requisition for tank accessories such as roof seal, roof drain system, aluminium dome roof & etc. Preparing technical bid evaluation for item purchased. Checking vendor’s calculation & construction drawings.
• Checking of construction drawings. Preparation of bill of material for purchasing.
• Preparation of technical queries to client base on design deviation.
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelor of Engineering (Mechanical)

Experience

Preferably Minimum 15 years of experience

Software Requirements

1) Autocad

2) Good proficiency in MS Excel, MS word

Code Knowledge

1) API 650/ API 620

2) ASME Section VIII D1 & D2

3) ASME Section II Part A & D

4) ASTM

5) NFPA

What you will do:
As Digital Solution Engineer/ Architect, you will be taking lead on application of digital software to our customer requirements and supporting digital sales specialists to sell the deals with include:

Client Engagement:

• Engage with prospective and existing clients to understand their business objectives, challenges, and technical requirements.
• Conduct discovery sessions to gather detailed information on customer needs, pain points, and success criteria.
• Develop and manage customer technical relationships, identify and expand digital opportunities.

Solution Design & Architecture:

• Develop customized digital solutions that align with client requirements, leveraging Johnson Controls’ digital OpenBlue portfolio, including IoT, AI, and data analytics platforms.
• Create and present high-level architectural solutions that address client needs, ensuring scalability, flexibility, and efficiency.

Technical Support to Sales:

o Qualify opportunities in terms of customer technical requirements and contribute to the Go/No-Go recommendations.

• Collaborate closely with the sales team to provide technical expertise throughout the sales cycle.
• Assist in the preparation of proposals, RFP responses, and presentations, ensuring they are technically accurate and compelling.
• Act as a technical advisor and thought leader to clients during meetings, workshops, and demonstrations.

Internal & External Digital Advocate:

o Enable the branch eco-system on technical aspect of the OpenBlue Solutions.

o Identify & train external partners to expand JCI digital solution business market reach

Product Demonstrations

• Deliver compelling product demonstrations that highlight the value and capabilities of Johnson Controls’ digital solutions.
• Tailor demonstrations to specific client needs, showcasing how our solutions can address their unique challenges

Solution Validation & Product Roadmap:

• Work with internal product teams to validate and optimize solutions for client-specific implementations.
• Provide feedback to product development teams on client requirements and market trends to inform future product enhancements.

Post Sales Activities:

• Support delivery readiness and gathering required documents including Scoping documents, IT approval, technical support during implementation
• Support Customer Kick-off meetings.

Documentation & Training:

• Develop and maintain technical documentation, including solution architectures, integration plans, and client-specific configurations.
• Provide training to sales teams and partners on new digital solutions and architectural best practices.

Industry Knowledge & Trends:

• Stay informed about the latest trends in digital solutions, smart building technologies, and industry-specific regulations.
• Share insights and best practices with clients and internal teams to drive innovation and competitive advantage.

How you will do it:

Technical Skills:

• Strong understanding of digital solutions, including IoT platforms, AI, data analytics, cloud computing, OT Cyber security and smart building technologies.
• Good understanding of building protocols like BACnet, Modbus, OPC, MQTT and other BAS protocols
• Proficiency in architectural frameworks, integration methodologies, and solution design best practices.
• Experience with relevant software and SaaS application in built or industrial environment.

Soft Skills:

• Commercial acumen
• Excellent communication and presentation skills, with the ability to convey complex technical concepts to non-technical audiences.
• Strong problem-solving abilities and a customer-centric mindset.
• Ability to work collaboratively in a cross-functional team environment

What we look for:

• Bachelor’s degree in computer science, Engineering, Information Technology, electronics, instrumentation, communication or a related field. A master’s degree is a plus
• Relevant certifications in cloud architecture, IoT, networking, cyber security or other digital technologies are a plus
• At least 6-7 years of experience in built or industrial environment.
• Minimum of 5 years of experience in a solution architect or presales role, preferably within the digital solutions, IoT, or smart building technology sectors.
• Minimum 3 years of experience in designing or delivering energy efficiency, workplace optimization, Asset Management, Facility management, HVAC optimization or digitization SaaS application in built or industrial environment.
• Proven track record of successfully designing and presenting technical solutions that meet client needs and drive business outcomes.
• Proficiency in APAC local language, Chinese is a plus as this position will require to liase with Chinese speaking customers.

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Job Description:

• Plan and control the delivery of project design to ensure the achievement of quality, completion and project objectives.
• Select and engage, then monitor the performance of external design partners within the discipline including their deliverables, cost and timeframes.
• Manage the design approval process in accordance with project requirements and program
• Prepare budgets and schedules of design delivery for management approval then manage and report the cost of design delivery in the project life cycle.
• Manage design to ensure the cost of the works meets project requirements.
• Manage client and stakeholder expectations and communicate effectively with the project team.
• Select and develop design management staff within the project by providing leadership and mentoring to ensure their design management competencies.
• Understand design compliance and reporting procedures and processes and leadership in the communication of requirements.
• Foster the interaction between design and construction teams to maximise innovation and project success.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Good interpersonal, communication, and organisational skills
• Able to work well independently and as a team

Job Description:

• Plan and control the delivery of project design to ensure the achievement of quality, completion and project objectives.
• Select and engage, then monitor the performance of external design partners within the discipline including their deliverables, cost and timeframes.
• Manage the design approval process in accordance with project requirements and program
• Prepare budgets and schedules of design delivery for management approval then manage and report the cost of design delivery in the project life cycle.
• Manage design to ensure the cost of the works meets project requirements.
• Manage client and stakeholder expectations and communicate effectively with the project team.
• Select and develop design management staff within the project by providing leadership and mentoring to ensure their design management competencies.
• Understand design compliance and reporting procedures and processes and leadership in the communication of requirements.
• Foster the interaction between design and construction teams to maximise innovation and project success.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Good interpersonal, communication, and organisational skills
• Able to work well independently and as a team

Job Description:

• Plan and control the delivery of project design to ensure the achievement of quality, completion and project objectives.
• Select and engage, then monitor the performance of external design partners within the discipline including their deliverables, cost and timeframes.
• Manage the design approval process in accordance with project requirements and program
• Prepare budgets and schedules of design delivery for management approval then manage and report the cost of design delivery in the project life cycle.
• Manage design to ensure the cost of the works meets project requirements.
• Manage client and stakeholder expectations and communicate effectively with the project team.
• Select and develop design management staff within the project by providing leadership and mentoring to ensure their design management competencies.
• Understand design compliance and reporting procedures and processes and leadership in the communication of requirements.
• Foster the interaction between design and construction teams to maximise innovation and project success.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Good interpersonal, communication, and organisational skills
• Able to work well independently and as a team

Job Descriptions

• Execute design activities with customer design proposals, specifications, manuals, and other data.
• Evaluate the feasibility, cost, and maintenance requirements of designs or applications.
• Prepare and update 3D drawing and control in every issuance of drawings, in accordance with the detailing procedures and standards using AutoCAD application/ BIM Softwares.
• Study drawings and other pertinent papers for preparation for fabrication and erection drawings.
• Checking of elevation, dimension, and reinforcement of all structures as indicated in plans.
• Prepares final as-built drawings as per requirement of the client.
• Liaise with Client, Client's Consultants, Contractor, and the Design Checker to obtain approval of design and drawings.

Job Requirements

• Degree in Mechanical Engineering
• Min 5 yrs experience in Mechanical Design
• BIM,AutoCAD/Inventor/Solidwork experience, preferably in designing wiches & lifting equipment
• Good communication skill, salf motivated, and positive attitude.
• Independent and hardworking.

Task Management:

• Preliminary vessel concept work for tendering
• Prepare 2D & 3D drawings/models for construction
• Engineering system calculations to various classification society rules
• Preparation & review of production drawings for construction
• Follow approved company processes as defined in the Strategic Marine Business Management System
• Assist in the development of design office standards / procedures
• Able to take on project management tasks
• Ensure OHSE policies & guidelines are carried out

People Management:

• Provide technical and professional support to junior staff

Interpersonal Management:

• Liaise with Project Managers and Designers
• Liaise with class and flag societies
• Liaise with customers to meet contracted requirements
• Liaise with external design organisations
• Liaise with production departments to provide technical support

Information Management: (Will this person be handling paperwork e.g. reports, forms, invoices, drawings, documentation, etc? What will this involve?)

• Provide regular communications to the Design Manager
• Attend Design & Project meetings and conference calls
• Provide info on work accomplished for B.O.D. reports on monthly basis to the Design Manager
• Ensure proper filing and documentation of drawings, calculations & other project documents in the design server
• Maintain an accurate project design register
• Provide weekly timesheets to Accounts and Design Manager

Personal Management: (How will this person have to behave to be successful in this job e.g. Honest, Reliable Punctual?)

• Open, respectful & approachable
• Act with integrity and honesty
• Continue to develop skills and industry knowledge through a variety of means
• Ability to work unsupervised to meet deadlines
• Flexibility and ability to multi-task
• Ability to mentor and develop junior staff
• Passionate about boats and a desire to work on a range of vessel types

• Review and approve shop drawings for RC and temporary works (e.g., struts, walers), and collaborate with consultants, the construction team, and authorities.
• In charge of structural design of temporary works, including scaffolding, falsework, and formwork.
• Take the lead or assist the project department in addressing design-related issues, while managing and resolving production, quality, design, engineering, and scheduling challenges.

Requirements:

• Degree in Civil Engineering or equivalent.
• At least 7 years of infrastructure project experience in structural design.
• Proficient in STADD, AutoCAD, and Microstation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Create comprehensive electrical circuit diagrams for automation and equipment systems.
• Assess, integrate, and validate hardware to ensure compliance with technical specifications.
• Produce CAD drawings depicting electrical circuits.
• Assist in diagnosing and resolving issues with system assembly, operation, and testing.
• Aid in equipment setup, problem-solving, and occasional installation.
• Provide assistance in testing new hardware and applications in-house.

Requirements

• Experience in automation machine design, proficiency in Electrical Design Software, electrical/electronic circuits and test instrumentation

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860

Only Shortlisted candidates will be notified

Quek Jian Wei

Reg No. R22110928

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.
  

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Perform design for manufacturability in all new projects.
• Provide PCB manufacturing technical advice to customers on their new projects.
• Perform feasibility studies and reviews for all new data received from customers.
• Adhoc duties as assigned.

Requirements:

• Degree/Diploma in Electrical & Electronics Engineering in Printed Wiring Board manufacturing environment
• Good communication, report writing and presentation skills
• Good analytical skill with ability to work independently
• Ability to communicate with all levels of staffs
• Entry level are welcome to apply as training will be provided.

Electronics MFG Industry

Loyang Area (Tpt pick up at designated area)

Interested applicants, please forward a detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Maintaining and administration of high availability of Cisco network and Windows servers in the organisation. 2. Ensure network and server systems availability and performances comply with Service Level Agreement. 3. Perform Linux, WINTEL and VMware system administration such as system upgrade, health-check, security patch, troubleshooting, capacity planning, backup & restoration and system performance monitoring. 4. Administer and maintain routers, switches, firewalls, SAN, IDS/IPS, VPN and address security issues. 5. Provide 2nd and 3rd level support for helpdesk support. 6. Responsible for asset and license management. 7. Work closely with the application team to provide infrastructure support. 8. Review\Create effective policies\procedures to support data centre operations. 9. Assume role of Security Administration with accordance to the Network Security governance. 10. Support internal and external auditors to ensure compliance to audit frameworks, guidelines and SLA. 11. Involve in Disaster recovery (DR) exercise and follow up with DR procedure updates. 12. Undertake infrastructure projects assigned as required by the business.

Strong hands-on experience with Cisco routing and switching, Linux, SAN storage, Firewall and VPN. 3. Experience with Windows Active Directory, VMware ESX / vSphere / vCentre, internet proxies, Anti-virus and security principles. 4. Practical knowledge in network\server systems troubleshooting and Incident reporting. 5. Knowledge of applicable IT security, confidentiality and data privacy practices. 6. Experience in setting policies, procedures, network software and hardware standards and documentation standards. 7. CCNA\CCNP\MCSE or equivalent certification will be advantageous. 8. Demonstrate good interpersonal skills and able to communicate effectively with all levels of people. 9. Possess good project management qualities and able to work under pressure and tight deadlines 10. Strong analytical logic and problem troubleshooting skills with great initiatives and self-motivation. 11. Good command of written and oral English.

As a Piping Design Engineer, you will serve as the company’s prime interface with customer, authority, sub-contractors and site personnel, on all process and piping matters. You will provide support through phases of the integration projects, ensuring high-quality outcomes and compliance with industry standards.

Job Responsibilites:

- Carry out design and engineering for onshore and offshore E-house integration projects in accordance with project specification and international standards.

- Good understanding of piping material specification and design requirement.

- Able to carry out and interpret piping and support stress analysis.

- Works independently to perform the assigned task and develops solutions to technical/engineering and related problems by analyzing the issue or data, interpreting the analysis, and evaluating various options/measures using experience, precedents, and professional references with minimal or no supervision or guidance.

- Responsible for the delivery of piping process system on project schedule with customer satisfactory.

- Involves in Commercial and Technical evaluation for bid and Vendor procurement.

- Technical review / schedule follow up during detailed engineering, procurement and assembly of sub-vendor equipment.

- Coordinate with the project team members from other business lines (project management, finance, scheduling, documentation, construction, installation and commissioning, etc.).

- Responsible for leading Factory acceptance test with client and subcontractor.

- Support site commissioning activities to ensure the complete project delivery.

- Coordination to close out all punch list generated during FAT, MC ITR and SAT.

- Issue follow-up and closing up of deviation reports.

- Ensure safety in design through the entire phase of works and accurate red line markup transfer to As Built documentation.

- Responsible for timely submission of documentation and As Built documentation to support milestone invoice.
- Provide support in piping testing and commissioning

Desired Characteristics:

- Background in Mechanical engineering with minimum 5 years’ experience for piping in Marine & Offshore/ Plants Projects.

- Familiar with ASME, API, AISI, ASTM standards NFPA, SOLAS, MODU, API RP 505, IEC 60079 Standards, and DNV/ ABS/ etc class requirement.

Contract Details:

- Duration: 1 year from start date

- Working hours: 10 hours / day, 5 days / week

- Location: Singapore

If you are interested to apply for this position, please submit your CV and contact details using the link provided.
Please note only shortlisted candidates will be responded to.

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Responsibilities:

Design mould, tooling and test socket solutions based on customer specifications, semiconductor packages, and testing requirements.

Utilize CAD tools (such as CREO, AutoCAD, SolidWorks, or similar) to create detailed 3D models and technical drawings.

Ensure designs meet mechanical, thermal, and electrical performance requirements for high-precision semiconductor testing.

Select appropriate materials, tolerances, and manufacturing methods to ensure product durability, precision, and cost-effectiveness.

Able to carry out the R&D of new test socket whenever the market trend is needed.

Work closely with cross-functional teams, including Sales, Product Development, Process Engineering, and Manufacturing, to refine designs and ensure compatibility with testing equipment and processes.

Provide technical support to manufacturing teams during prototyping, production, and assembly to resolve any design-related issues.

Engage with customers and vendors to ensure all moulds, tooling and test socket solutions meet functional requirements and industry standards.

Oversee the prototyping phase, ensuring that initial designs are built and tested effectively.

Lead or participate in validation and testing efforts to ensure the tooling and test sockets perform under specified conditions (e.g., temperature, mechanical stress, electrical signals, thermodynamics).

Analyse test data and provide feedback for continuous improvement in design and materials.

Continuously seek to improve design efficiency and product performance, optimizing socket contact interfaces, reducing testing time, and improving signal integrity.

Innovate by introducing new design techniques, materials, or technologies that improve the quality, reliability, and cost of the test sockets and tooling solutions.

Stay up-to-date with the latest semiconductor technologies and testing methodologies to ensure cutting-edge designs.

Develop and maintain comprehensive documentation for all designs, including detailed engineering drawings, materials specifications, and manufacturing processes.

Create user manuals and technical documentation to guide customers and internal teams on the proper usage of tooling and test sockets.

Qualifications:

At least Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related field.

Proficiency in & Hands-on experience with CAD software for mechanical design and simulation (e.g., CREO, SolidWorks, or AutoCAD).

Knowledge of materials science, particularly in relation to thermal management, wear resistance, and conductivity

Excellent problem-solving skills, with the ability to identify and address complex technical challenges.

Strong attention to detail and precision in design and documentation.

Ability to work independently and as part of a cross-functional team.

Effective communication skills for both internal team coordination and customer interactions.

Willingness to travel occasionally for customer visits, manufacturing site inspections, or vendor meetings.

• We are a chip design service company invested by an international consortium and founded by a senior chip design technical team.
• The company is headquartered in Singapore and will take root in Singapore for long-term development.
• The company has strong R&D capabilities and its core technical team members all have more than 10 years of experience in chip design.
• We have rich industry experience and deep practical accumulation in ASIC design and business management.

Our office is located in one North and walking distance from MRT.

We Provide competitive salary and compensation package for the right candidate. We are work-life balance and friendly to employees with various benefit.

Job Description：

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 5 years of work experience in the digital backend design field. Hands-on project experience is required. Tapeout experience at advanced technology is prefered. ( for excellect junior candidates with 3+ years experience will be considerated )

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.

4. Strong communication ability, good confidence and self-movitation.

5. Bilingual and with good teamwork spirit.

6. Salary is negotiable for excellent candidates.

Job Description

• Develop control solution related to Semiconductor equipment.
• Design electrical system includes interlock, power distribution, digital/analog signal, I/O, etc
• Manage external vendors or contractors to deliver sub-systems that meet design specification and reliability
• Responsible for equipment safety, manage equipment compliance and certification on standards such as SEMI, CE, etc
• Integrate and test subsystems

Requirement

• Bachelor’s Degree in Electrical Engineering or equivalent
• At least 5 years working experience in capital / semicon equipment electrical system design
• Familiar with AC & DC application, motors, sensors, etc
• Experience in semiconductor equipment industry or high precision automation equipment industry
• Familiar with communication protocol, such as Ethernet, RS232, etc
• Working knowledge of electrical systems including motion, temperature measurement, PID loops, and safety interlock circuits.
• Strong diagnostic skills and capable of resolving electrical noise, grounding, and signal integrity issues
• Experience in Electrical CAD tools
• Experience in PCB design is an advantage

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg
Please include your availability, expected salary and reason for leaving current job
We regret that only shortlisted candidates will be contacted
EA: 94C3609 / Reg: R1325913

Provide 1 st and 2nd level support  Technical assistance and support for incoming IT Helpdesk and End User desktop queries and problems.  Laptop/desktop/peripherals hardware and software technical support.  Windows 7/10, Windows server, file/print/scan services, Outlook/Office 2016, Office365 suite, 2FA, LAN\WAN/Wireless network connectivity, VPN, mobile devices, meeting room audio/video conferencing systems, PABX and basic application troubleshooting.  Perform PC/Laptop Refresh, Onboarding and off boarding of users and ensure asset inventory tracking is updated.  Escalate issues to OEM/vendors and follow-up until the resolution of the problem.  Out-Of-Office-Hours On-Call support. 2. Systems administration and maintenance  Provide Wintel server, Active Directory, GPO, WSUS, Software deployment and system administration.  Liaise with external vendors for any related hardware/software maintenance and services.  Perform Installation/Configuration/Monitoring/Patching/Upgrades of desktops, servers, operating systems, antivirus, databases and other system related software.  Participate in disaster recovery testing. 3. IT governance & documentation  Involve in regular review and update of infrastructure policies, procedures and system documentation to ensure compliance.  Plan and conduct end-users training as needed.  Conduct quarterly IT asset counts.

At least 2 years of working experience in IT helpdesk providing 1st level and 2nd level end user desktop support. 2. Strong experience in End user hardware and software technical support, Windows 7/10, Office 365 administration and Active Directory. 3. Good to have networking, storage and some database administration experience. 4. Able to work on a rotating 2nd level Out-Of-Office-Hours support On-Call basis. 5. Knowledge of ITIL operation. 6. Strong analytical skills, ability to work independently and in a team environment. 7. Possesses good attitude, good interpersonal and communication skills. EDUCATION 1. Degree/Diploma in Electronic/Computer Engineering or Computer Studies or equivalent. 2. Good to have ITIL foundation certification. 3. Good to have Microsoft 365 or MCSA certification

Job Scope :

- Assume responsibility for technical assignments involving basic or applied research or the design and development of Electrical hardware products. Includes design, fabrication, modification and evaluation of electromechanical devices, components or systems.

- Devise initial concept of assigned device, component or system and participate in the overall detailed Electrical perspective of product design.

- Creates original hardware, circuits, components, software, processes, and models to prove the feasibility of the design approach being investigated. Inclusive of Electronics and PCBA

- Participate in design review by providing inputs relating to DFM and DFA, etc.

- Prepare and release Engineering drawings/schematics while communicating to local vendors to expedite delivery of design parts and assemblies.

- ECO release of engineering documentation.

- Design of AC/DC power distribution systems including selection of circuit breakers, power supplies, contactors and cabling harnesses. Knowledge of PCBA Design, component selection and trouble shooting.

- Develop, test and document designs

- Develops estimates for products and projects. Power consumption, weight, size and schedule.

- Coordinates with manufacturing during pilot run and first production runs to ensure efficient transition from engineering into production.

- Interface effectively with customer to understand technical requirements and propose quality solutions.

- Possesses good electrical troubleshooting skills, and is able to troubleshoot at customer sites.

- Interfaces effectively with other organization such as Purchasing, Marketing, Service, and Quality Assurance as needed to carry out responsibilities

- Assists engineering management in developing schedules and specifications for new and legacy products.

- Maintains a high level of technical competence and state-of-the-art awareness.

- Directs engineering and technical support personnel as required.

- Maintains a high level of technical competence and state-of-the-art awareness.

- Performs other related duties as assigned.

Requirements:

- Degree / Masters in Engineering or requivalent

- 3 – 5 years of relevant experience

- Must possess relevant experience in Semicon Equipment Build

- Good working knowledge of electrical systems including motion, temperature measurement, PID loops, and safety interlock circuits.

- Experience working on dynamic electromechanical system design

- Proficient user of orcad, autocad, pcad, Solidworks or similar 3D CAD Software

- Design knowledge on NFPA, Semi Safety Requirements, and Machine safety.

- Good communication and interpersonal skills.

- Good command of written and verbal English

Job Scope :

- 2D drafting and other documentation.

- Assists Senior Engineer on the following :

• Technical assignments involving basic or applied research or the design and development of hardware products that includes CIP, upgrades, End Of Life (EOL).
• Includes design and evaluation of mechanical and/or electromechanical devices, components or systems.
• Develop, test and document designs for the transport mechanisms, vacuum systems and various process stations, including deposition chambers, substrate heating, cooling, cleaning, etc.

- Participate in the overall detailed product design.

- Participate in design review by providing mechanical design inputs relating to DFM and DFA, etc.

- Prepare and release 3D Solid Models and Engineering drawing while communicating to local vendors to expedite delivery of design parts and assemblies.

- Performs other related duties as assigned..

Requirements:

- Nitec / Diploma in Engineering or equivalent

- 2 – 3 years of relevant experience

- Proficient user of Solidworks

- Knowledge of Orcad

- Experience in Machine Design and familiarity in Design Processes

- Knowledge of ECO release of Engineering quality documentation

- Experience in dynamic electro-mechanical system design and high vacuum design will be an advantage

Physical Design Engineer

Experience : 5+ Years

Salary Range :SGD 7000-10000

Skills & Technical Expertise Required:

Netlist to GDSII at block level, Subsystem Level and at Full chip.

Worked on multiple tapeouts on Netlist to GDSII

Hierarchical partitioning and budgeting of block-level subsystems.

Implementation of high performance (HP) cores, low power designs

Node experience upto 3nm,7nm, 10nm, 14nm, 28nm.

Timing Signoff in loop through STA and ECO cycle at block and at interface.

Block level floor planning, power planning and IR drop analysis.

Scan chain reordering / Scan Chain repartitioning

CTS expertise and clock tree constraints creation for meeting specifications

MMMC optimization at Block and Sub-System Level

Timing closure with Crosstalk and AOCV / POCV

TCL scripting to fundamentally understand tool usage.

Mandatory EDA Skills

PnR tools such as Synopsys ICC/ICC2 and/or Cadence Innovus

THE ROLE:

As a member of the SoC Physical Integration team, you'll interface with various engineering groups, including architecture, design, CAD, software, and product engineering, across various geographies to work towards the physical/electrical verification and tape out of AMD SoC FPGA/ACAP devices. Common essential duties and responsibilities include, but are not limited to:

• Defining and developing flows and methodologies for chip level integration
• Developing tools for design verification or efficiency
• Designing (RTL and custom), verifying, and integrating FPGA/ACAP sub-blocks
• Coordinating activities between different design groups to ensure smooth integration
• Executing chip level physical verification
• Executing chip level electrical verification

PREFERRED EXPERIENCE:

• Basic understanding of FPGA architecture
• Knowledge of and/or experience with design and verification tools such as Virtuoso and Calibre
• Knowledge of and/or experience with P&R tools
• Fundamental circuit design knowledge including simulation experience with Spice and Verilog
• Strong debug skills
• Scripting experience using Perl, Python, TCL, C-shell, Make and/or other scripting languages
• Knowledge and experience with basic Unix data management and job control
• Excellent written and oral communication skills

ACADEMIC CREDENTIALS:

• BS with 2+ years of exp or MS in Electrical Engineering, Computer Engineering or related equivalent

LOCATION:
Singapore