Total 2,738 design editor job vacancies in Art / Design / Entertainment category in Singapore

The Senior Design Engineer is responsible for structural analysis and design compliance are met for the project. This role will be supporting a Data Centre project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the work place.

Value Add of Position

• Design and calculation report for reinforced concrete, steel and geotechnical works using British Standards and Eurocode.

Technical Competencies

• Technical expertise and knowledge in Foundation, Structural and Civil works.

Qualifications and Education Requirements

• Minimum Degree in Civil Engineering from accredited Universities
• Prior 6 years of experience in design and construction (structural)
• Have completed a data center project or Past experience in Data Centre project will be highly preferred
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred

The Senior Design Engineer is responsible for structural analysis and design compliance are met for the project. This role will be supporting precast projects.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the work place.

Value Add of Position

• Design and calculation report for reinforced concrete, steel and geotechnical works using British Standards and Eurocode.

Technical Competencies

• Technical expertise and knowledge in Foundation, Structural and Civil works.

Qualifications and Education Requirements

• Minimum Degree in Civil Engineering from accredited Universities
• Prior 6 years of experience in design and construction (structural)
• Have completed a precast project or Past experience in precast projects will be highly preferred
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred

You will participate in the specification, design and design maintenance of high-tech mechatronic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad.

Requirements:

• Bachelor’s or Master’s Degree in Mechanical, Electrical or Mechatronic engineering, preferably with a focus on motion systems and with experience in high-tech equipment
• Basic knowledge in the (motion) control competence:

1. Frequency domain
2. Controller design
3. Measurement systems
4. Actuator systems
5. Understanding of different drivers + motors

• Knowledge in PLC programming, preferably TwinCAT
• Knowledge in data postprocessing, preferably Python/Matlab
• Basic knowledge in general software design for motion control systems
• Basic knowledge of electric design principles of cabling, connectors, safety systems, electronic racks, PCB design
• Basic knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Additional requirements for Sr. Mechatronic Engineer:

• At least 5 years of relevant working experience (semicon, precision mechanics, or similar)
• At least 3 years experience in PLC programming and data postprocessing
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing interdependency between electrical, electromechanical and mechanical (sub)systems

The Team

Our Building Services teams at Cundall have a mission: they want to play a key role in making buildings more energy efficient, cost effective to run and, ultimately, more sustainable. To do this, we’re looking for graduates who have a desire and enthusiasm to make a difference: in our homes, our offices, our projects, our industry and our community.

Working across a variety of industry sectors, our Building Services engineers are a source of world leading expertise; producing innovative and award-winning sustainable engineering solutions throughout the lifecycle of any building project.

With 26 offices globally, we offer a pro-active and collaborative approach to skill development, professional excellence and knowledge sharing.

Our Building Services teams have accomplished amazing projects like an innovative office for Google, the largest arts centre in Scotland, and an energy efficient data centre for Facebook. As a graduate in the team, you could play a key part in our next big project.

The Role

In this Graduate Engineer role based in our Singapore office, you’ll join a team who specialise in the design of some of the most exciting construction projects in Asia and worldwide.

Working closely with colleagues across our multi-disciplinary practice, you’ll provide specialist consultancy input on projects across a wide range of sectors including education, healthcare, workplace, retail and critical systems (data centres).

Under the guidance of our team of experienced engineers, we’ll equip you to undertake detailed building services engineering design and analysis, defining and translating clients’ needs into designs for buildings, facilities and services - all with sustainability at the forefront of the design.

You’ll have the opportunity over time to assume greater levels of responsibility and autonomy as your professional skills develop and with accredited professional development programmes from CIBSE and IET, you’ll be fully supported towards achieving chartership.

The Skills

Accredited with, or on course to achieve an MEng degree level (or equivalent) in either Electrical, Mechanical or Building Services Engineering, you’re passionate about innovative and sustainable Electrical/Mechanical design engineering for the built environment. Ideally, you’ll have furthered this interest by undertaking some form of relevant work experience or placement/internship.

You have an appreciation for the core elements of building services engineering and crucially, have a love for creative and intuitive design. Digital engineering is a big focus at Cundall, so ideally, you’ll have an understanding of Parametric Modelling Techniques (Grasshopper or Dynamo), or at least one modern programming language (e.g. Python, C#, VB). An understanding of Engineering Optimisation Techniques, the principles of structured programming and basic knowledge in the application of Machine Learning would also be desirable.

You are organised and methodical in your approach to managing your tasks and priorities, you strive to meet deadlines and have a close appreciation of the commercial factors which affect design solutions.

Collaborative in nature, you’ll be able to empathise with your clients’ needs and utilise excellent communication skills, both in writing and verbally, with internal and external stakeholders. You’re used to using your initiative to overcome challenges and have a positive, can-do attitude.

What’s in it for you

We offer a competitive starting salary which grows as you develop, as well as many training and development opportunities to make sure you keep progressing. Aside from this, those who successfully join our graduate scheme also enjoy:

• Professional career development and mentoring
• Sponsorship for professional membership
• Exposure to international opportunities

Cundall values equality and diversity, and welcomes applications from candidates regardless of sex, race, disability, age, sexual orientation, gender reassignment, religion or belief, marital status, or pregnancy and maternity.

Job purpose

To manage Project Planning, Organization and Management of the assigned design team to meet the project expectation. To perform and manage the complete design process from feasibility study and report, building code and standard compliances, concept design, design development, technical design, tender documents and procedure, construction documentation and design management during construction.

Duties and responsibilities

· Perform concept design studies, sketch plans, and criteria/facilities programs for projects as required.

· Perform technical review of drawings and required design submission on assigned projects, and to ensure conformance with company design standards.

· Innovative and cost effective design to meet company design standard.

· Represents the department to face the clients and builds positive and mutually beneficial relationships.

· Lead on communication and coordination with internal and external disciplines to ensure the complete design integration of projects.

· Track and maintain project milestones, schedule and budget.

· Conduct and participate inter-department coordination on all project related issues.

· Conduct review/approval (with participation from internal and external disciplines) of variances from company standards requested by clients on specific project requirements.

· Provide design guidance to client and their consultants, as well as internal design and construction staff to adapt company design standards.

· Conduct site visits and prepares Property Improvement Plans (PIPs).

· Maintain and update project review templates and quality control checklists.

· Provide recommendation for design changes to address customer satisfaction, operational concerns, company standard, and development strategies.

· Supervise, motivate, and trains assigned team members and external consultants where necessary.

· Assist Head of Department to maintain and develop company standard documents and work flow.

· Assist Head of Department on policy, methods, and systems support matters.

· Other duties assigned by HOD.

Qualifications

· Bachelors or Master’s Degree in Architecture.

· A minimum of 6-8 years of progressive experience in architectural design at a design firm for large commercial, and/or, residential, office building, assembly facility projects.

· A minimum of 6 years of experience in the preparation and coordination of architectural construction documents and coordination of consultants.

· Good architectural design skills, technical and project management skills.

· Good business judgment and creative problem solving attributes.

· Strong conceptual design/freehand sketching and/or digital presentation abilities.

· good analytical and problem-solving skills

· Be confident, assertive and independent.

· Possesses intermediate knowledge of applicable codes, and implications on design.

· Demonstrated success in taking projects through design review process.

· Ability to discuss and debate philosophical design issues and solve complex project issues.

· Advanced design, visual and graphic presentation skills required.

· Advanced ability to work in team environment and supervise others.

· Ability to plan and manage design team efforts to effectively meet deadlines.

· Good interpersonal skill and attention to detail.

· Excellent oral and written communication skills in English and interpersonal skills.

· Ability to work well in high volume, fast-paced environment as a member of a collaborative team

· Computer skills: electronic mark-up software, MS Office, MS Project, Sketchup, AutoCAD and other relevant 3d softwares.

• 5.5 days (alternate Saturday)
• Ubi Area
• Team bonding

Job Description:

• Support and coordinate drawing/ technical issues with projects
• Create and prepare related drawings, proposals and technical submissions as per schedule in good quality
• Responsible for maintaining design and technical specifications of equipment and materials
• Coordinate with Professional Engineers for design calculations and endorsements
• Prepares and updates Revit Model
• Prepare 2D and 3D drawings as required by the project
• Update drawing registry
• Provide technical support for tender
• Performs other duties as assigned

Requirement:

• Minimum 1 year of experience in M&E industry
• Good experience in related BIM with strong technical knowledge and modelling skills
• Able to effectively communicate with individuals at all levels.
• Proficiency in Microsoft Office, AutoCAD and Revit
• Motivated, responsible with positive attitude

Job Description & Requirements:

Are you a motivated and creative individual seeking a dynamic career that challenges your creativity? Join our interior design firm as a Sales Interior Designer, where you'll experience satisfaction and fulfillment with every project acquired. This is not your typical 8-5 deskbound job, as it offers flexible work hours and high remuneration.

Responsibilities:

1. Manage clients/leads provided by the company, eliminating the need for cold calling.
2. Understand clients' needs and design requirements, ensuring a comprehensive understanding of their vision.
3. Conceptualize design proposals together with the Design team. Creating proposal that are both aesthetically pleasing and functional, and pitch them to potential clients.
4. Plan and execute projects with the Project Management team, ensuring client satisfaction and project success.

Who We're Looking For:

1. Driven and motivated individuals who thrive in a dynamic sales career that keeps them constantly on the move.
2. At least 1 year of experience in interior design or renovation is a must.

Join our team and embark on a rewarding career where your creativity and sales acumen will flourish. We offer a supportive work environment, training opportunities, and competitive remuneration (70% commission scheme)

Want to create out-of-this-world visuals?

We’ve got an opening.

Sqkii is known for our flagship #HuntTheMouse campaign that gives away cold, hard cash to players who find hidden coins. If you’ve seen Singaporeans squatting in random spots, walking around with metal detectors, or sticking their heads under tables… you’ve probably seen one of our games in action. Besides our hunts, we also create custom games that bring players on other real life adventures and virtual journeys through their mobile screens — they’re also super cool, just ask the mouse.

Right now, we’re bringing #HuntTheMouse beyond the shores of Singapore to other cities across Asia-Pacific. We visited 5 cities in just Q2 2023 alone, and oh boy do we have big plans ahead. Big plans = bigger team, so we’re on the hunt (ha) for someone who wants to hop onto this thrilling ride.

As our Digital Designer Intern, you'll wield the mystical paintbrush of pixie dust and rainbows to bring ideas to life on our different channels. Throw us any ideas you have and make us believe in them; we're open to trying out literally anything under the sun. Though fair warning — you can expect some pretty wild thoughts coming back at you. If you've got an eye for brilliant looks and can't wait to see your creations reaching millions of humans, we're on the edges of our seats just waiting to meet you. Come on in and dazzle us.

P.S. After you’ve applied, we’ll send over some secret tasks for you to try your hand at before we arrange for a virtual chat!

What you’ll be doing:

• Working with our Digital Designer in bringing marketing campaigns to life across all of Sqkii's channels, including brainstorming, conceptualising, sketching, and executing creative assets while ensuring quality and consistency with the brand and project mood-boards
• Developing effective visuals to attract a hyper casual audience, by applying consumer psychology and using design principles and visual trends
• Assisting the UI team to build visually appealing user interface for games and websites
• Assisting the operations team with other ad-hoc duties as necessary

What you’ll need:

• To be a current student at local public polytechnics or universities
• An excellent eye for visuals and details
• Advanced proficiency in visual design software, such as Figma, Photoshop, After Effects, Premiere Pro, and Illustrator
• Knowledge of simple video editing is a plus
• Strong communication skills
• A creative, positive, and flexible attitude
• Commitment for at least three months, though the internship period is flexible

Responsibilities:

• Prepare, check and approve electrical drawings and documents
• Manage and lead a small team of engineers and drafters to fulfil project schedule and address technical issues raised by clients and other stakeholders
• Review vendor drawings and documents
• Evaluate technical proposals from vendors and suppliers to ensure technical compliance
• Provide engineering support throughout the project to multidisciplinary sections, procurement, project team, site production team, commissioning activities etc.
• Perform engineering design work including electrical calculations for cable sizing, equipment sizing, voltage drop calculations, etc.
• Participate and witness FATs, inspections, tests, sea trials, etc.
• Organize and chair meetings with clients and stakeholders to address technical queries and discussion in order to meet project contractual specifications and class requirements
• Assist in the administration, coordination, liaison between all stakeholders

Requirements:

• Min Diploma/Degree in Electrical/Power Engineering
• Experience in Electrical Design and or switchboard design is an advantage
• Electrical Marine experience is also advantage

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Head - Design is responsible for the success of our projects. You will be responsible for the creative vision, quality and performance of our interior design services, driving the combination of design and product strategy that leads to unique value propositions and significant market impact. Working closely with our Co-CEO’s and creative leadership team, you will develop and implement client development strategies.

This role requires significant travel, fifty percent or more, a professional presentation style, articulative, creativity, good judgment, client and operator management and strong business acumen.

In Brief:

● Collaborate and work closely with our Co-CEOs and creative leadership team to develop and implement client development strategies to reinforce our position as the preeminent luxury hospitality design firm globally.

● Lead and work on multiple hospitality design projects.

● Oversee project deliverables and resolving escalations by collaborating with client and other stakeholders.

● Be the key point of contract for projects and clients, and responsible for overall quality and performance of the project teams that you are leading.

● Have an active involvement in client engagement and business development activities.

● Develop new approaches to design process and strategy, to foster a culture of design within the practice.

● Develop next generation design talent, coach and support their professional development.

● Work closely with project leaders, design leaders and project teams across our studios.

● Overall responsibility to the project’s leadership.

What we Expect

● You are an Interior Design professional with leadership experience of managing a team or studio.

● You have been in a client facing role and have experience of managing clients & handling pitches and design presentations.

● You have excellent design management and presentation skills with relevant experience of working on Hospitality design projects.

● You have a strong design sensibility and the technical ability to develop a project from concept to execution.

● You are a team player with a positive attitude to go the extra mile

Summary of role: You will be involved in the designing of electrical system that meets the project requirements, safety, and functionality.

Responsibilities:

· Design and draft of Electrical Single Line / Panel Diagram according to customer technical specification;

· Maintain, update and correct drawings as needed, and ensure its accuracy and completeness;

· Collaborate with project teams to facilitate drawing preparation;

· Respond promptly to inquiries and request relating to the drawings.

Requirements:

· Diploma/Degree in Electrical/Electronic Engineering from a recognised Polytechnic/University;

· Knowledge in Autocad and Eplan is an advantaged;

· Possession of team spirit, good communication and organising skills;

· A good team player with strong collaboration and stakeholders’ management skills;

· Excellent organizing skills, spoken and written communication skills.

Job Responsibilities.

• Electrical design for Industrial Automation Systems
• Discuss project specification with sale department, internal design team and customer.
• Ensures project specification is sufficient for electrical design work.
• Ensure the drawing, software and manual are done and issue to the customer
• Support sales department in design concept and costing for new enquiries

Job Requirements

• Diploma/Degree in Electrical & Electronics Engineering or equivalent
• Design experience in similar capacity, preferably in Industrial Automation Systems and Robotic Systems added advantage
• Candidates without relevant experience will be considered for junior engineer role
• Occasional travel maybe required
• Able to work under tight schedule and minimal supervision
• CAD knowledge such as solid edge, Auto CAD, Inventor

We regret that only shortlisted candidates will be notified.

Job Requirements

1) To work as supporting Process Design Engineer to Project Lead Process Design Engineer

2) To co-ordinate with Process Designer to Prepare PFD & P&IDs

3) Perform Hydraulic calculations, surge analysis, Wastewater calculation, Firefighting calculation

4) Perform Tank Venting Calculation as per API 2000

5) Perform TRV and PSV Sizing Calculation as per API 520 & API 521

6) Prepare Tank Operating Level Calculation

7) Prepare Heat & Material Balance

8) Perform Heat Transfer Calculations

9) Prepare Material Selection Diagram

10) Prepare Process Line List, Product Data sheet

11) Participate in HAZOP / SIL Study and close out HAZOP / SIL Action sheets

12) Prepare Design Basis & System Description

13) Prepare Pollution control report and Fire safety report

14) Perform Tank emission calculation

15) Prepare Process data sheets for Equipments like pumps, Heat Exchangers, Refrigeration unit, Flare, Boilers, Oil Water Separators, Vessels

16) Prepare Process data sheets for Instruments like control valves, MOVs, Pneumatic actuators, Level Transmitters, Pressure Transmitters, Temperature Transmitters, Flow meters etc.

17) Prepare Process Control Philosophy & ESD Philosophy

18) Prepare Cause & Effect Diagram

19) Prepare Commissioning Procedure & Operation Manual

20) Review Vendor Documents for Process related information

21) Review Plot Plan, Piping Layout, Instrument Data Sheet, Equipment Data Sheets for Process related information as Inter Discipline Check

22) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

23) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Software Requirements

1) Pipe Net

2) Good proficiency in MS Excel, MS word, MS Power Point

3) Smart Plant P&ID

4) Autocad

Code Knowledge

1) API 2000, API 520, API 521, API 2350

2) SS 532

3) NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Qualification

Bachelor of Engineering (Chemical)

Experience

4 years to 7 years

* Only Shortlisted Candidates Would Be Notified.

• Prepare construction drawings including shop drawings submissions and approvals.
• Manage work progress on site, and work closely with consultants, sub-contractors and operation teams.
• Liaise with a team of BIM Modellers in the design and coordination works.

Requirements:

• Degree in Architecture
• At least 3 years of experience in Main Contractor.
• Competent to read and understand construction drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Title: Design Engineer (ID5042)
Location: Tuas
Working Hours: Mon to Fri, 8.30am to 6pm
Salary: $4000 to $6300


Job Description:
• Design component and assembly with CAD software. Prepare engineering drawings and engineering bill of material
• Analyse, design, develop, maintain products and assist in their commercialization
• Review technical documentation including engineering specifications, drawings, calculation packs, bill of materials, guidelines and repair procedures
• Checking and approving drawings, information and documentation which meets engineering standard to enable the manufacturing group and other departments to produce and market product
• Attend and initiate Design and Development Planning and Review session to meet customer's and industry's need

Requirement:
• Have a Bachelor's Degree in Mechanical Engineering
• Have experience (5years) in mechanical engineering in Welding / Oil & Gas engineering or other related fields. At least 3 years of product design experience in Oil & Gas Industry
• Have knowledge in API Standards and Monogram
• AutoCAD and #D design are the basic knowledge. Most preferably already familiar with ProE/Creo, SolidWorks, CATIA. NX or similar CAD and FEA/CFD program
• Display good oral and written communication and presentation skills in English

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 3 to 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job Requirements

1) To work as supporting Process Design Engineer to Project Lead Process Design Engineer

2) To co-ordinate with Process Designer to Prepare PFD & P&IDs

3) Perform Hydraulic calculations, surge analysis, Wastewater calculation, Firefighting calculation

4) Perform Tank Venting Calculation as per API 2000

5) Perform TRV and PSV Sizing Calculation as per API 520 & API 521

6) Prepare Tank Operating Level Calculation

7) Prepare Heat & Material Balance

8) Perform Heat Transfer Calculations

9) Prepare Material Selection Diagram

10) Prepare Process Line List, Product Data sheet

11) Participate in HAZOP / SIL Study and close out HAZOP / SIL Action sheets

12) Prepare Design Basis & System Description

13) Prepare Pollution control report and Fire safety report

14) Perform Tank emission calculation

15) Prepare Process data sheets for Equipments like pumps, Heat Exchangers, Refrigeration unit, Flare, Boilers, Oil Water Separators, Vessels

16) Prepare Process data sheets for Instruments like control valves, MOVs, Pneumatic actuators, Level Transmitters, Pressure Transmitters, Temperature Transmitters, Flow meters etc.

17) Prepare Process Control Philosophy & ESD Philosophy

18) Prepare Cause & Effect Diagram

19) Prepare Commissioning Procedure & Operation Manual

20) Review Vendor Documents for Process related information

21) Review Plot Plan, Piping Layout, Instrument Data Sheet, Equipment Data Sheets for Process related information as Inter Discipline Check

22) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

23) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Software Requirements

1) Pipe Net

2) Good proficiency in MS Excel, MS word, MS Power Point

3) Smart Plant P&ID

4) Autocad

Code Knowledge

1) API 2000, API 520, API 521, API 2350

2) SS 532

3) NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Qualification

Bachelor of Engineering (Chemical)

Experience

4 years to 7 years

* Only Shortlisted Candidates Would Be Notified.

about the company

Our client is a leading global leader of semiconductor solutions. They have operations globally across Taiwan, Europe, China, Korea etc. and they’re now on a look out for a Senior/Design Engineer to join their dynamic team during an exciting time in their development.

What you will be here for

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves
• Produce detailed engineering drawings
• Perform design verification and validation testing
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc

What you will need

• Degree in Mechanical or Mechatronics Engineering
• Min 5 years of experience in automation / high precision machine / semiconductor equipment / High Speed Pick and Place design
• Must process knowledge and experience in the design of automation or semiconductor equipment
• Must process good knowledge for 3D CAD software
• Equipment troubleshooting experience will be a plus
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing

If you are interested in the position , kindly send your CVs to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

WHY join us?

LifeUp is a One-Stop Marketing Solution for Realtors - 360 Virtual Tours, Videography, Photography, Social Media, Advertising. Our clients includes many of top division directors in the real estate space.

RESPONSIBILITIES

• The video content editor is responsible for video editing, creating video contents with raw materials and footage according to requirements
• Both offline and online post process of edited footage, final check of the video formats back-up to ensure
• Ability to think visually, conceptualise stories, and edit video packages independently

PRE-REQUISITES

• Proficiency in video/photo editing tools like Premiere Pro, Lightroom & Photoshop
• Problem solver, creative and independent
• Available for a minimum of 3 months

What’s in it for you

• Gain first hand industry experience in content creation for professional real estate & commercial industries
• Chance to learn how to navigate the VR space through relevant softwares

Want to design fun games that give out free money?

We’ve got an opening.

Sqkii is known for our flagship #HuntTheMouse campaign that gives away cold, hard cash to players who find hidden coins. If you’ve seen Singaporeans squatting in random spots, walking around with metal detectors, or sticking their heads under tables… you’ve probably seen one of our games in action. Besides our hunts, we also create custom games that bring players on other real life adventures and virtual journeys through their mobile screens — they’re also super cool, just ask the mouse.

Right now, we’re bringing #HuntTheMouse beyond the shores of Singapore to other cities across Asia-Pacific. We visited 5 cities in just Q2 2023 alone, and oh boy do we have big plans ahead. Big plans = bigger team, so we’re on the hunt (ha) for someone who wants to hop onto this thrilling ride.

As our UI/UX Design Intern, you’ll work your magic behind-the-scenes to bring our current and future games to wild new heights. Fair warning — we’re open to ideas from literally anyone in the team, so you can expect some pretty absurd plans amidst legit game thingamajigs. If you love games, understand games, and can’t wait to create some of the most exciting ones to date, we (and our Game Operations team) are 200% ready to meet you.

See below for more details and hit us up for a chat anytime.

P.S. After you’ve applied, we’ll send over some secret tasks for you to try your hand at before we arrange for a virtual chat!

What you’ll be doing:

• Performing in-depth research in order to create effective user personas, information architecture and user journeys
• Tackling clients’ product requirements with comprehensive UX design strategies, by applying gamer psychology and human-centred design principles
• Producing high quality UX design work, including, user flow diagrams, site maps, wireframes and prototypes (both in paper & digital formats)
• Conveying your vision for the final digital product through sketches, storyboards and mood boards
• Working closely with game designers, developers, copywriters, UI designers and other stakeholders to produce high-quality games
• (Bonus) Conducting tests for digital products at all stages of planning in order to analyse and predict user behaviour

What you’ll need:

• To be a current student at local Singapore public polytechnics or universities
• Knowledge of UX processes and usability design principles
• Strong understanding of hierarchy and layout design principles
• Understanding of game navigation and common UI patterns
• The ability to synthesise user research into UX design insights
• Good written and verbal communication skills
• Excellent time management and organisation abilities
• A high degree of self-motivation
• High attention to details
• Confidence, resilience, persistence
• Experience in game design would be a plus
• Commitment for at least three months, though the internship period is flexible

Job Summary

Our client is looking for a leader to drive and implement all aspects of the design process, from conception to launch.

Mandatory Skill-set

• Degree in Design, Arts, Computer Science or related field;
• Minimum 8 years' experience in as an UX/UI Designer in a software/tech business;
• Good experience with product management;
• Possess knowledge on UX/UI and able to design and create simple UI drafts;
• Proficient with Interaction Design, Visual Design, User Research, Front End Development, Product Design Strategy;
• Good hands on experience with Figma, Zeplin, Adobe CS (AI, PS, PR);
• Excellent experience of customer experience and engagement in digital businesses;
• Entrepreneurial attitude and passion for innovative solutions and brand experiences that enable progress for our customers;
• Experience of software engineering practices and tools in Agile & Scrum;
• Ability to work with and manage stakeholder at all levels;
• Excellent communication and leadership skills;
• Able to work in fast and challenging environment.

Desired Skill-set

• Agile / Scrum Certifications;
• Banking or Insurance experience.

Responsibilities

• Lead/Architect/Deliver customer centricity through business strategy, customer experience management/innovation, research and insight, iterative design/rapid prototyping and forward-looking strategies;
• Understand and design the customer insights into user journeys, storyboards, wireframes and prototypes;
• Planning of product roadmap aligning to company’s business strategy and design guidelines;
• Work alongside the production team to define user stories and translate into detailed requirements and tasks;
• Prioritize the various features and tasks for the production team;
• Spearhead activities in UI design, produce design concepts and detailed design using visual design drafting tools for both internal and external applications;
• Managing the product backlog;
• Perform market research on user needs and usability studies based on usage data, before incorporating these results into overall product design;
• Collaborate with other technology partners to define the roles and requirements of various sub-systems involved;
• Drive activities to research on advance technologies that could be incorporated to enhance user’s experience with the product;
• Planning of new product features and enhancements to continuously improve user’s experience and hence business success;
• Communicate product's vision and articulate design vision to various stakeholders.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

about company

I am currently working with a general insurance provider.

2-3 rounds of interview to offer stage. Flexible hybrid working arrangement. Majority of the stakeholders are based overseas.

about job

• Discover and translate customer insights into concepts, personas, user journeys, storyboards, system maps, wireframes and prototypes

• Set clear design guidelines, create and maintain a design system for coherent design and faster product development in an agile environment

• Execute UI design for external- and internal-facing applications (web / app)

• Work closely with Product Managers to ensure design meets business goals and end-user’s needs; excel in understanding complex product requirements and translate it into user-centric design solutions

• Communicate the product’s vision and articulate design decisions and trade-offs both verbally and visually to internal and external stakeholders

• Manage 2 product designers based in Indonesia

skills and requirements

• Min 5 years of professional experience as an UX/UI Designer in a software/tech business.

• Proven experience working in projects from the stage of ideation all the way to the delivery of development-ready assets

• Has experience managing/mentoring a small team of designers

• Great knowledge and hands-on experience with Figma, Zeplin, Adobe CS (AI, PS)

• Understanding of Front End development and experience working in agile/scrum methodologies

• Positive attitude and strong leadership qualities that inspire team members to deliver the highest quality

• Prefer someone from B2B background, Fintech/Insurance/Direct consumers domain

To apply online please use the 'apply' function, alternatively you may contact Stella at 96554170 (EA: 94C3609 /R1875382)

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Design Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Responsible for the creation of innovative product designs and improvement/development to existing product designs.
• Regularly engages with third parties (e.g. customers, suppliers, vendors, etc), contributing to the technical specifications development.
• Responsible for various aspects of projects and collaborates with support teams to develop operational procedures.
• Management of engineering design modifications, involving the review as well as approval of engineering’s drawings.
• Proficient in appointed meetings to ensure the compatibility, interfaces, and functionality of relevant components within associated systems.
• Attends project meetings, where technical details are presented.
• All other ad-hoc duties as assigned.

Requirements:

• Minimum Degree in Engineering or equivalent
• Minimum 6 years’ relevant working experience
• Understanding of various industry standards and offshore operations

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

We are seeking a creative and dedicated interior designer to join our team. The ideal candidate will have a keen eye for design and aesthetics, a passion for transforming spaces, and the ability to work collaboratively with clients and team members to bring visions to Life. This role involves working on a variety of projects, from residential to commercial spaces, ensuring each meets our high standards of quality and innovation.

Responsibilities:

• Collaborate with Clients to understand their design preferences, requirements, and budget constraints.
• Handles Sales Inquiries
• Quality leads will be provided.
• Cost proposals to clients.
• Develop and present design concepts, including space planning, color schemes, and furnishing (Layout, mood board, material board)
• Create detailed drawings / 3D perspective drawings using design software.
• Supervise the implementation of design projects, ensuring adherence to timelines and quality standards.
• Plan project schedule efficiently to meet client’s Deadlines.
• Ensure design proposal and timeline are achieved.
• Regular Site visit supervision.
• Ad Hoc duty.
• Able to prioritize work and multi-tasking.

Requirements:

• Self-motivated and willing to learn.
• Passionate in interior design
• Good oral and interpersonal skill
• Team player
• Preferably at least 1 year in interior design or equivalent
• Entry-level candidates are welcome to apply.

Benefit:

• Commission base and basic scheme are available.
• An annual incentive for sales target achievers.
• Annual leaves
• Medical benefit
• Career Advancement
• Mentorship will be provided.

Responsibilities

• Interacting with clients across the Design & Build journey;
• Working closely with Principal Architect and other stakeholders (QS, Project Manager, Site Manager) throughout the design development and implementation stages
• Developing project briefs and working on them in parallel with the build process. Candidate must be comfortable working closely with clients to finalize design details;
• Preparing design proposals using AutoCAD and traditional drawing methods;
• Contributing to planning applications and other regulatory application procedures;
• Collaborating with our in-house construction and QS teams to evaluate design aspects of a construction project for cost and functional considerations;
• Preparing and producing construction documents and specifications, including quality control of work produced by more junior staff/direct reports;
• Making site visits to check on progress and ensuring that the project is on time;
• Solving problems that might occur during building/construction stage;
• Carrying out defect inspections;
• Developing and collating design standards and SOPs with other Senior Architects

Requirements Include

• Master or Bachelor of Architecture equivalent (Recognised by BOA)
• Registration with BOA an advantage
• At least 5 years of relevant experience. Preferred experience in design or project management of landed residential projects (New Erections)
• Direct design development towards architectural intent
• Proficient in AutoCAD, Sketch up, Revit and/or Lumion
• Comprehensive knowledge of construction details and materials
• Capacity to work in a challenging and fast paced environment
• Team player, with the willingness to collaborate with QS and Construction Management colleagues in a respectful and equal grounds environment