Total 117 quality assurance engineer job vacancies in Art / Design / Entertainment category in d19 serangoon garden hougang sengkang punggol

Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

Job Description:

We are looking for an Analog Chip Design Engineer to lead the development of digital standard cell libraries and design advanced analog circuits. You will optimize circuit designs, innovate new digital standard cells, and collaborate with cross-functional teams to meet performance, power, and area requirements.

Key Responsibilities:

• Circuit Design & Optimization: Lead analog circuit design, optimize for speed, power, and reliability using Cadence Virtuoso, Spectre, and HSPICE.
• Digital Standard Cell Libraries: Develop high-performance, low-power digital standard cells.
• Innovative Architecture Development: Research and design innovative digital standard cell architectures and explore new logic families and power-saving techniques.
• Collaboration: Work with layout designers to ensure manufacturability, performance, and adherence to DFM/DFT standards.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. is a plus.
• Experience: 5+ years in high-performance analog design with expertise in deep sub-micron process technologies (12nm and below).
• Skills:
  • Analog Design Expertise: Proficient in transistor-level design, noise analysis, and power optimization.
  • Tool Proficiency: Experience with Cadence Virtuoso, Spectre, and HSPICE.
  • Digital Standard Cell Design: Experience designing digital cells balancing performance, power, and area.
• Communication: Strong collaboration skills and ability to work in cross-functional teams.

Job role:

1. Works with the front-end design team to complete the chip floorplan , clock

architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an

automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 3 years of work experience in the digital backend design field.

3. Hands-on project experience is required.

4. Tapeout experience at advanced technology is prefered.

5. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

Please apply here: https://talent.sage.hr/jobs/12fc69c2-7012-4edc-b214-bb9c2ded1da2

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for IC Design Research Engineers with the following backgrounds:

- Digital IC Design

- Analog IC Design

As an IC Design Research Engineer, you will design and innovate secure circuits and systems for next-generation low-power IoMT devices and sensors, focusing on hardware security, and smart computing and connectivity platforms.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

Position Overview:

We are seeking a skilled Physical Design Engineer to join our team. As a Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Assist in the physical design process, overseeing RTL to GDS implementation for semiconductor chips.
• Achieve block-level timing closure by optimizing design constraints, performing timing analysis, and applying optimization techniques.
• Conduct formal checks to ensure designs meet functional and timing requirements.
• Perform low-power checks and analyze power consumption to optimize power efficiency.
• Collaborate with the design team to develop and implement UPF (Unified Power Format) for power management and control.
• Execute block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff processes.
• Utilize Synopsys and Cadence APR (Automated Routing and Place) tools for high-quality physical design.
• Develop and employ scripts in Tcl, Perl, or Python to automate design tasks and improve the design flow.

Qualification/ Requirements:

• Bachelor's/master’s degree in electrical engineering, Computer Engineering, or a related field.
• 2-4 years of experience in physical design for semiconductor chips.
• Proficiency in RTL-to-GDS flow, timing closure, low-power design, and power analysis.
• Strong understanding of UPF for power management and control.
• Experience with block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff.
• Familiarity with Synopsys and Cadence APR/Sign-off tools.
• Proficiency in scripting languages such as Tcl, Perl, or Python for automation.
• Excellent problem-solving skills and ability to work effectively in a team environment.

Responsibilities:

• Implement simulation models of AI SoC or subsystem designs

• Perform computer architecture performance simulation

• Analyse experimental data and perform architecture explorations

• Identify bottlenecks in design and provide feedback on micro-architecture

• Propose chip architecture optimizations for chip performance, power, and area improvement

• Cross-team collaborations to deliver high quality chip products

• Validate the correctness of the AI chip designs

• Write patents

Qualification:

• Bachelor degree and above in Electrical & Electronic Engineering, Computer Science or equivalent

• Familiar with computer architecture, such as AI accelerator, CPU, network-on-chip, memory hierarchy

• Familiar with C/C++ language

• Familiar with computer architecture simulation is preferred

• Strong learning capability, good communication and collaboration skills

• Fresh graduates are also encouraged to apply

Responsibilities:

• Implement simulation models of AI SoC or subsystem designs

• Perform computer architecture performance simulation

• Analyse experimental data and perform architecture explorations

• Identify bottlenecks in design and provide feedback on micro-architecture

• Propose chip architecture optimizations for chip performance, power, and area improvement

• Cross-team collaborations to deliver high quality chip products

• Validate the correctness of the AI chip designs

• Write patents

Qualification:

• Bachelor degree and above in Electrical & Electronic Engineering, Computer Science or equivalent

• Familiar with computer architecture, such as AI accelerator, CPU, network-on-chip, memory hierarchy

• Familiar with C/C++ language

• Familiar with computer architecture simulation is preferred

• Strong learning capability, good communication and collaboration skills

• Fresh graduates are also encouraged to apply

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Responsibilities:

· Participate in feature definitions of the leading-edge AI chips

· Lead and participate the microarchitecture design of AI chip SoC and the subsystems

· Lead and participate in the front-end design and the implementation using HDLs

· Perform critical analysis and propose novel chip architectures for performance, power, and area improvement

· Cross-team collaboration with Software, DV, and Physical Design to meet performance, power, and area goals

· Write patents

Qualification:

· Bachelor degree and above in Electrical & Electronic Engineering, Computer Science or equivalent

· Experience in computer architecture, such as AI Accelerator, CPU, network-on-chip, memory hierarchy

· Experience in hardware module development using HDLs

· Experience with Logic Synthesis, Linting, CDC and DFT tools is preferred

· Good understanding of RTL verification flow and environments (e.g., UVM, VIP) is preferred

· Strong learning capability, good communication and collaboration skills

· Mid-senior to senior level positions are available

Responsibilities:

• Carry out structural design and analysis to meet project requirement.
• Prepare design calculations & shop drawings for submission.
• Provide general technical support to the in-house operations team.
• Technical marketing of structural strengthening products.
• Attend meetings with clients for pre and post contract to meet project requirement.
• Accountable for effective co-ordination of projects as assigned.
• Ensure all safety and quality assurance procedures and standards are followed.

Requirements:

• Must possess at least a good Degree in Engineering (Civil) recognised by the Ministry of Manpower, Singapore and is familiar with the British American Design Standards, and Eurocodes.
• Able to perform structural analysis using design software such as STAADPro ETABS, Prokon etc.
• Familiar with AutoCAD application.
• Good command of spoken and written English.
• Possess initiative, analytical thinking abilities and able to work both independently and as a team.
• Possess positive attitude and interpersonal relationship skills.
• Foreigners: Minimum of two years' experience in local consultancy firms will be an advantage.

What you will be working on:

● Innovate and Build: Design and develop new, cutting-edge features for WebOrion®,

enhancing its ability to safeguard against web and API vulnerabilities.

● Pioneer AI Security: Research and create advanced modules for our next-gen AI firewall

that defends against AI-driven cyber threats.

● Full-Stack Impact: Manage and maintain databases, APIs, software, servers, and cloud

infrastructure.

● Agile Development: Contribute to an agile lifecycle—coding, debugging, testing, deploying,

and improving software releases.

● Customer-Centric Support: Provide top-notch technical support for our global enterprise

customers.

What we are looking for:

● Bachelor’s or Master’s Degree in Computer Science/ Engineering, Information Technology or

equivalent

● Hands on experience with Docker and programming languages such as Golang or Python.

● Interest in Security for AI. Defending against the next wave of AI attacks.

● Have a good understanding of RESTful APIs, databases, messaging queues, CI/CD tools

and software testing. Experience with Linux command-line and Git

● Able to write and document technical concepts

● Teamwork skills with a problem-solving attitude

● Preferably 1–2 years of relevant experience, though exceptional fresh graduates with

solid internship experience are welcome.

● Must be based in Singapore.

Why Join Us:

• Innovate for Impact: Be part of the team that's building a revolutionary AI firewall to
• defend against AI-driven threats, redefining the cybersecurity landscape.
• Global Exposure: Work with enterprise customers across ASEAN, Europe, and the
• US, gaining valuable international experience.
• Cutting-Edge Projects: Build cool cybersecurity products while working at the nexus of
• web, cloud, and AI security.
• Career Growth: Join a fast-growing company where your contributions make a real
• difference.

Interested applicants, please drop us a note at [email protected] with your CV and cover letter.

Meet the Team

The IoT Digital team is a state-of-art IC design team focused on producing world-class Wireless MCU SoCs. The architecture specification, design, verification, and implementation of the Wireless MCU SoCs is the responsibility of the IoT Digital team. These SoCs include an embedded CPU system with analog and digital peripherals, advanced security, state-of-the-art power management, and best-in-class radios to support a wide range of wireless IoT applications and standards.

As Verification Engineer, you will be working closely with the IC Design, System, and Architecture teams to develop and execute the verification plan for the next generation of IoT chips.

Responsibilities

• Block and IP Verification
• Block-level verification to validate block performance and adherence to requirements
• Generate and execute verification plan based on specifications
• Architect and implement test benches using UVM-based constrained-random and formal methods
• Coverage definition, implementation, and analysis
• Formal Verification of mixed-signal IP integration, including real-number modeling
• SoC Integration and Verification
• Define, test and debug use cases for the SoC
• Verify and debug low-power design
• Flows and Methodology
• Improve flows and methodologies to streamline IP development and integration.

Skills You Will Need

Minimum Qualifications:

• Min. 5 years of IC design experience for senior positions. Open to junior candidates with strong foundation.
• Industry experience developing test benches and verification components with SystemVerilog and UVM is required
• Knowledge of scripting/language (Python, PERL, shell, TCL)
• Design/Verification skills such as Software/Firmware coding (C), SystemVerilog Assertion and coverage analysis, Low-power implementation (UPF), Mixed Signal Real Number Modeling (RNM, Spice)

Benefits & Perks:

You can look forward to the following benefits:

• Employee Stock Purchase Plan (ESPP)
• Insurance plans with Outpatient cover
• Flexible work policy

Position Overview:

We are seeking a skilled Senior Physical Design Engineer to join our team. As a Senior Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Lead the physical design process, overseeing RTL to GDS implementation for semiconductor chips.
• Achieve block-level timing closure by optimizing design constraints, performing timing analysis, and applying optimization techniques.
• Conduct formal checks to ensure designs meet functional and timing requirements.
• Perform low-power checks and analyze power consumption to optimize power efficiency.
• Collaborate with the design team to develop and implement UPF (Unified Power Format) for power management and control.
• Execute block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff processes.
• Utilize Synopsys and Cadence APR (Automated Routing and Place) tools for high-quality physical design.
• Develop and employ scripts in Tcl, Perl, or Python to automate design tasks and improve the design flow.
• Mentor junior engineers and provide technical guidance and support as needed.

Qualification/ Requirements:

• Bachelor's/master’s degree in electrical engineering, Computer Engineering, or a related field.
• 3-5 years of experience in physical design for semiconductor chips.
• Proficiency in RTL-to-GDS flow, timing closure, low-power design, and power analysis.
• Strong understanding of UPF for power management and control.
• Experience with block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff.
• Familiarity with Synopsys and Cadence APR/Sign-off tools.
• Proficiency in scripting languages such as Tcl, Perl, or Python for automation.
• Able to guide junior colleague when needed.
• Excellent problem-solving skills and ability to work effectively in a team environment.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design.
• Min. 5 years of experience in CMOS Analog IC design and simulation.
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent).
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job description:

As a member of the filter design team, the successful candidate will play a key design role as a product owner of resonator/filter in development and commercialization of acoustic filters with both BAW and SAW technologies from beginning, concept meeting to end, mass production including characterization.

Experience with either SAW or BAW filter design -layout, simulation, fabrication, and characterization- is required for senior position and principal position is available for candidates with proven track record in ramping up commercialization of acoustics filters in mass production environment.

Responsibilities:

- Co-work with international team across China and Singapore on a cross-disciplinary team basis

- Use commercial circuit analysis and physical modelling tools as well as custom software packages to design and analyse acoustic filters

- Assist RF measurement analysis by generating test plans and analysing results

- Produce RF engineering reports to support team members

- Communicate with R&D team for co-design and device improvement

Qualifications/Desired skills:

- Track record in design and mass-production of SAW/BAW filters for mobile applications is highly desirable

- Strong skills and working knowledge of design simulation tools, e.g. ADS, AWR, HFSS, COMSOL, etc

- Understanding of RF test parameters and test equipment

- Understanding of filter application and mobile communication system and architecture

- Experience with drawing programs, schematic capture and PCB layout tools

- Experience in RFIC design, RF module and front-end system design is preferred

- Knowledge of MEMS fabrication

- Strong written and verbal English skills to support complex analysis

- Organized team player and a good learner who is open to discussions

What you will do:
As Digital Solution Engineer/ Architect, you will be taking lead on application of digital software to our customer requirements and supporting digital sales specialists to sell the deals with include:

Client Engagement:

• Engage with prospective and existing clients to understand their business objectives, challenges, and technical requirements.
• Conduct discovery sessions to gather detailed information on customer needs, pain points, and success criteria.
• Develop and manage customer technical relationships, identify and expand digital opportunities.

Solution Design & Architecture:

• Develop customized digital solutions that align with client requirements, leveraging Johnson Controls’ digital OpenBlue portfolio, including IoT, AI, and data analytics platforms.
• Create and present high-level architectural solutions that address client needs, ensuring scalability, flexibility, and efficiency.

Technical Support to Sales:

o Qualify opportunities in terms of customer technical requirements and contribute to the Go/No-Go recommendations.

• Collaborate closely with the sales team to provide technical expertise throughout the sales cycle.
• Assist in the preparation of proposals, RFP responses, and presentations, ensuring they are technically accurate and compelling.
• Act as a technical advisor and thought leader to clients during meetings, workshops, and demonstrations.

Internal & External Digital Advocate:

o Enable the branch eco-system on technical aspect of the OpenBlue Solutions.

o Identify & train external partners to expand JCI digital solution business market reach

Product Demonstrations

• Deliver compelling product demonstrations that highlight the value and capabilities of Johnson Controls’ digital solutions.
• Tailor demonstrations to specific client needs, showcasing how our solutions can address their unique challenges

Solution Validation & Product Roadmap:

• Work with internal product teams to validate and optimize solutions for client-specific implementations.
• Provide feedback to product development teams on client requirements and market trends to inform future product enhancements.

Post Sales Activities:

• Support delivery readiness and gathering required documents including Scoping documents, IT approval, technical support during implementation
• Support Customer Kick-off meetings.

Documentation & Training:

• Develop and maintain technical documentation, including solution architectures, integration plans, and client-specific configurations.
• Provide training to sales teams and partners on new digital solutions and architectural best practices.

Industry Knowledge & Trends:

• Stay informed about the latest trends in digital solutions, smart building technologies, and industry-specific regulations.
• Share insights and best practices with clients and internal teams to drive innovation and competitive advantage.

How you will do it:

Technical Skills:

• Strong understanding of digital solutions, including IoT platforms, AI, data analytics, cloud computing, OT Cyber security and smart building technologies.
• Good understanding of building protocols like BACnet, Modbus, OPC, MQTT and other BAS protocols
• Proficiency in architectural frameworks, integration methodologies, and solution design best practices.
• Experience with relevant software and SaaS application in built or industrial environment.

Soft Skills:

• Commercial acumen
• Excellent communication and presentation skills, with the ability to convey complex technical concepts to non-technical audiences.
• Strong problem-solving abilities and a customer-centric mindset.
• Ability to work collaboratively in a cross-functional team environment

What we look for:

• Bachelor’s degree in computer science, Engineering, Information Technology, electronics, instrumentation, communication or a related field. A master’s degree is a plus
• Relevant certifications in cloud architecture, IoT, networking, cyber security or other digital technologies are a plus
• At least 6-7 years of experience in built or industrial environment.
• Minimum of 5 years of experience in a solution architect or presales role, preferably within the digital solutions, IoT, or smart building technology sectors.
• Minimum 3 years of experience in designing or delivering energy efficiency, workplace optimization, Asset Management, Facility management, HVAC optimization or digitization SaaS application in built or industrial environment.
• Proven track record of successfully designing and presenting technical solutions that meet client needs and drive business outcomes.
• Proficiency in APAC local language, Chinese is a plus as this position will require to liase with Chinese speaking customers.

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Degree or diploma in Civil Engineering or project management.

Please email your CV to: [email protected]

Our business:

Professional Engineer (PE Civil)

1. PE endorsement for any temp works

2. PE endorsement for wall hacking, submission to HDB/MCST;

3. Building structure crack/safety assessment

4. Scaffolding/shoring/formwork design

5. ECM design and submission to PUB / QECP inspection to site

6. A&A work design and submission to URA/BCA/HDB/LTA/JTC

7. SCDF submission for shop / factory partition works

8. LTA prompt submission for road opening;

9. PUB POWS submission

10. PUB Form B1 endorsement for sewer connection

11. SCDF FSC02 form endorsement.

12. HDB SED 054M form endorsement.

13. Project management

14. Design for Safety (DfSP) Services

15. Building structural inspection (PSI) to BCA requirements

16. Façade inspection to BCA requirements

17. Earth returning structure design and submission (ERSS)

M & E Work (PE Mechanical)

18. Design and PE endorsement to piping / ducting support

19. Design and PE endorsement to piping trenching excavation work

20. Endorsement to FSC02 form

21. Mechanical PE work

Geotechnical Consultancy

22. Deep Excavation

23. Slope Protection

24. Soil Improvement

25. Foundation Design

26. Soil Interpretation Report

Others

27. Land Survey

28. Pre-con survey

29. Technical clearance to Npark, PUB, LTA, JTC etc.

30. Traffic diversion design, LTA prompt submission

31. Design for Safety Professional (DfSP)

Job Description

Reporting to the Project Manager/Engineering Manager, successful applicants will be involved in Power supply system and switching mode power supply development activities such as electrical circuit design, magnetic design, prototyping, evaluation and assisting manufacturing in BETA run of the new product.

Key Skills & Responsibilities

• Understand customer requirement to design or modify XP product to provide Added Value (AV) Solution based on XP design criteria and procedure
• Maintain an in-depth knowledge of all XP products to identify and select the most suitable product for Engineering Solution design.
• Design new products in timely manner to meet the product spec, modify existing designs, improve existing products for better performance and /or cost
• Proposed AV or modified solution based on sales/customer requirements.
• Perform product verification & validation test such as electrical performance, thermal, EMC and DVT to ensure product meet specification before delivered to customer.
• Electrical circuit and schematic design
• Embedded systems design both in hardware
• Firmware design knowledge will be an added advantage.
• Bill of materials (BOM) creation and documentation.
• Breadboard and prototype samples making and debugging
• Design new solution/product within XP standard design practice, safety guidelines, agreed timescales and costs.
• Performed product (AV and modified model) verification and validation, such as electrical performance, thermal, EMC and DVT evaluations,
• There will be some travelling required in conjunction with customer and manufacturing support as well as outside training

Qualifications

Knowledge/Qualifications/Attributes

• Minimum bachelor’s degree in electrical/electronic or higher degree in a related engineering field.
• More than 3 years electrical design experience of power supply/power system; those with more than 5 years’ experience will be considered for senior position.
• For Senior position, Identifies, and review projects main task, schedules, and technical challenges on project delivery timely is required.
• Good project management skill and capable of leading long-term structured problem-solving projects for senior position.
• Familiarity with PCB design using Altium/PADS will be an added advantage.
• Requires good communication, reasoning, problem solving and analytical skills.
• Hardworking, dynamic, strong responsibility and a good team play

Job Responsibilities:-

• Utilize in-depth knowledge of Foundation IP to evaluate and qualify IP’s. Able to benchmark and optimize Std cells/IO’s/memory for optimum performance, area or power needs of a project
• Conduct Spice simulations to verify the performance and reliability of designs on RC extracted netlists
• Perform library characterization to ensure accurate timing, power, and area models. Stay up-to-date with industry trends and emerging technologies in library characterization and PPA analysis
• Help to develop and maintain EDA automation scripts to streamline CAD flow and design processes
• Modify and optimize IPQA scripts to improve efficiency and performance
• Analyze and understand both hard and soft IPs within SOC designs. Work with IP vendors to deliver custom specs needed for MXL project needs
• Review silicon reports and provide detailed analysis to identify and resolve issues
• Work closely with vendors and cross-functional teams to ensure successful project outcomes. Collaborate with design teams to ensure seamless integration of libraries and IP blocks
• Maintain comprehensive documentation of IP Vendor engagement. Troubleshoot and resolve issues related to IP, EDA tools and automation flows

Job Requirements:-

• Bachelor’s or Master’s Degree in Electrical Engineering, Computer Engineering, or a related field
• Minimum 10 years of experience in design engineering or a related field. Good understanding of the IC design flow, including front-end and back-end processes
• Proficiency in Foundation IP, Spice Simulation, Library Characterization, EDA automation scripts, and IP script modifications. Familiarity with library characterization tools such as Liberate, Cadence Genus, or Synopsys Library Compiler
• Strong ability to review and analyze silicon reports and provide detailed insights. Excellent analytical and problem-solving skills
• Excellent interpersonal and communication skills for effective collaboration with vendors and team members
• Experience with advanced node technologies (e.g., 8nm, 4nm, and below)
• Experience with SOC IP design and verification
• Knowledge of emerging technologies such as FinFET, FD-SOI, or III-V semiconductors
• Familiarity with industry-standard EDA tools and methodologies
• Experience with tools such as Synopsys PrimeTime, Cadence Genus, or Mentor Graphics Questa

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

As a Package Design Engineer within the Package Development and Engineering (PDE) organization in Micron Technology, you will provide package definition and designs for advanced semiconductor devices. You will be working with a multi-functional team across several geographies to create package design databases such as package stack-up, simulation, route-study, substrate/lead frame layout, wire bond diagrams, and other design documentation. You will be ensure the completion of design activities within the project schedule and ensure that design outputs are within Assembly and vendor capability.

Responsibilities will include, but are not limited to:

• Conduct feasibility studies for various package options and assess designs for manufacturability and reliability.
• Work closely with multi-functional team to address packaging design challenge in the area of layout, electrical, thermal, mechanical, assembly and reliability.
• Interact with PDE assembly team and external assembly subcontractor partners to recommend package solutions to meet customer and/or market requirements
• Generate and update assembly documents in database. Provide drafting and drawing support for package drawings, interposer drawings, and manufacturing drawings.
• Support package and DFMEA reviews with assembly engineering and subcon teams.
• Support package technology development, including material selection, process development, DOEs, and related activities
• Support package technology development, including material selection, process development, DOEs (Design of Experiments), and related activities.
• Track and drive program milestones to ensure timely development execution.
• Provide design support for thermal/mechanical/electrical simulation analysis.
• Support and contribute to the Global Design, Simulation and Substrate (GDSS) team on continuous improvement efforts such as:Global design alignment activities
  Continuous improvement efforts
  Package design rules
  Package roadmaps
  Competitive Analysis review

Requirements:

• Master (preferred) or Bachelor of Science degree in Electrical Engineering or Mechanical Engineering with a minimum of 5 years of experience in semiconductor packaging industry OR PhD graduates in Electrical Engineering
• Candidates must possess a strong design knowledge of high-density (Wirebond + Flip-Chip) packaging architectures, die stack-up, packaging layout optimization.
• Excellent communication skills, both oral and written in English.
• Excellent problem solving and analytic skills.
• Experience with Cadence SIP, APD and AutoCAD software tools is preferred.
• Good understanding of Silicon IP, floorplan and Signal/Power Integrity is a plus.
• Ability to work independently, prioritize and manage numerous projects with minimum supervision.
• A global perspective and the ability to work in a multicultural environment.

Performs semiconductor design engineering assignments including engineering and designing packaging stack-up, layout checking, documenting specifications, modifying and evaluating packaging risk in the areas of electrical, thermal, mechanical and reliability. Reviews package design requirements, define the package stack-up and conduct final design review. Typically responsible for projects, or portions of projects, to design, fabricate, modify, and evaluate semiconductor Packaging.

What you will do:
As Digital Solution Engineer/ Architect, you will be taking lead on application of digital software to our customer requirements and supporting digital sales specialists to sell the deals with include:

Client Engagement:

• Engage with prospective and existing clients to understand their business objectives, challenges, and technical requirements.
• Conduct discovery sessions to gather detailed information on customer needs, pain points, and success criteria.
• Develop and manage customer technical relationships, identify and expand digital opportunities.

Solution Design & Architecture:

• Develop customized digital solutions that align with client requirements, leveraging Johnson Controls’ digital OpenBlue portfolio, including IoT, AI, and data analytics platforms.
• Create and present high-level architectural solutions that address client needs, ensuring scalability, flexibility, and efficiency.

Technical Support to Sales:

o Qualify opportunities in terms of customer technical requirements and contribute to the Go/No-Go recommendations.

• Collaborate closely with the sales team to provide technical expertise throughout the sales cycle.
• Assist in the preparation of proposals, RFP responses, and presentations, ensuring they are technically accurate and compelling.
• Act as a technical advisor and thought leader to clients during meetings, workshops, and demonstrations.

Internal & External Digital Advocate:

o Enable the branch eco-system on technical aspect of the OpenBlue Solutions.

o Identify & train external partners to expand JCI digital solution business market reach

Product Demonstrations

• Deliver compelling product demonstrations that highlight the value and capabilities of Johnson Controls’ digital solutions.
• Tailor demonstrations to specific client needs, showcasing how our solutions can address their unique challenges

Solution Validation & Product Roadmap:

• Work with internal product teams to validate and optimize solutions for client-specific implementations.
• Provide feedback to product development teams on client requirements and market trends to inform future product enhancements.

Post Sales Activities:

• Support delivery readiness and gathering required documents including Scoping documents, IT approval, technical support during implementation
• Support Customer Kick-off meetings.

Documentation & Training:

• Develop and maintain technical documentation, including solution architectures, integration plans, and client-specific configurations.
• Provide training to sales teams and partners on new digital solutions and architectural best practices.

Industry Knowledge & Trends:

• Stay informed about the latest trends in digital solutions, smart building technologies, and industry-specific regulations.
• Share insights and best practices with clients and internal teams to drive innovation and competitive advantage.

How you will do it:

Technical Skills:

• Strong understanding of digital solutions, including IoT platforms, AI, data analytics, cloud computing, OT Cyber security and smart building technologies.
• Good understanding of building protocols like BACnet, Modbus, OPC, MQTT and other BAS protocols
• Proficiency in architectural frameworks, integration methodologies, and solution design best practices.
• Experience with relevant software and SaaS application in built or industrial environment.

Soft Skills:

• Commercial acumen
• Excellent communication and presentation skills, with the ability to convey complex technical concepts to non-technical audiences.
• Strong problem-solving abilities and a customer-centric mindset.
• Ability to work collaboratively in a cross-functional team environment

What we look for:

• Bachelor’s degree in computer science, Engineering, Information Technology, electronics, instrumentation, communication or a related field. A master’s degree is a plus
• Relevant certifications in cloud architecture, IoT, networking, cyber security or other digital technologies are a plus
• At least 6-7 years of experience in built or industrial environment.
• Minimum of 5 years of experience in a solution architect or presales role, preferably within the digital solutions, IoT, or smart building technology sectors.
• Minimum 3 years of experience in designing or delivering energy efficiency, workplace optimization, Asset Management, Facility management, HVAC optimization or digitization SaaS application in built or industrial environment.
• Proven track record of successfully designing and presenting technical solutions that meet client needs and drive business outcomes.
• Proficiency in APAC local language, Chinese is a plus as this position will require to liase with Chinese speaking customers.

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy