Responsibilities:

· Design and coordinate assigned Civil and Structural projects

· Perform structural analysis and design in building or on any structures as required by the project

· Liaise with clients & consultants to meet C&S requirements.

· Coordinate to ensure civil and structural requirements meet project tender, submission and construction schedule

Requirements:

· Good degree in Civil and Structural Engineering from a recognized University

· Minimum 1-2 year working experience in Civil & Structural consultancy firm

· Conversant with structural programs such as STAAD, TEKLA, ETABS, RAPT would be advantages

· Ability to work independently

· Candidate without the relevant working experience but with good academic results may be considered

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain — and we’re looking for talented people who want to help.

You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion.

We are seeking an Electrical Engineer to become part of a world class engineering team to lead the Electrical design of our Data Centers across our rapidly expanding Asia Pacific (APAC) portfolio.

We're looking for candidates that share our customer obsession by providing innovative solutions to enhance our market leading reliability. Technical leaders that can explain complex systems in clear and concise language. We contribute to our global body of knowledge and drive a cycle of continuous improvement at a global scale. We are looking for engineers with hands on electrical design experience across the project lifecycle from concept design through construction, to commissioning and handover. You will be relied on as a subject matter expert in the electrical engineering field. At Amazon we highly support continued learning opportunities and focus on continued employee development.

You must be able to work within a team and depend on others to accomplish the required work. As an electrical engineer at Amazon you will be working with other internal groups as well as external groups including utilities, manufacturers, vendors, consultants and contractors.

Amazon has a global presence and a 25% travel will be expected as part of this role. Projects will be throughout the region and a degree of international travel and support will be necessary.

We are the leaders in our industry. We always strive to improve in every aspect of our business. Continuous improvement through Lean Engineering practices is fundamental to our business. As an engineer within our team you will spend a regular part of your time analyzing and improving every aspect of our value stream.

Key job responsibilities
The Electrical Engineer will be responsible for the following:
• Lead Data center electrical designs in collaboration with other disciplines to create a coordinated construction document set
• Participate in site selection reviews and work with local utilities to understand and define site utility requirements
• Critical Data Center equipment design including site-wide MV infrastructure, Generators, Uninterruptible Power Supplies, Switchgear, Transformers and Earthing
• Creation of designs which meet or exceed our quality requirements and fall within our budgetary requirements
• Work with regional vendors and manufacturers to specify the appropriate electrical equipment
• Work with local agencies having jurisdiction to ensure compliance with IEC requirements, the various APAC wide design codes and other jurisdictional requirements
• Review and approval of equipment submittals and ability to work on concurrent projects in multiple geographical regions
• Define project scope and provide technical support for information requests prior to, and during construction phases
• Work with commissioning teams to properly test and validate installation, operation, and performance of electrical systems
• Travel to sites for site review and work with onsite field engineers, as well as provide engineering evaluations, electrical systems audits, and startup as needed

About the team
Diverse Experiences
AWS values diverse experiences. Even if you do not meet all of the qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.

Why AWS?
Amazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.

Inclusive Team Culture
Here at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.

Mentorship & Career Growth
We’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.

Work/Life Balance
We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why flexible work hours and arrangements are part of our culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.

Basic qualifications

• Degree in an Electrical Engineering field and 3+ years of experience directly related to data center or mission critical facility design

• Comprehensive understanding of the various code requirements across the APAC region

• Fundamental understanding of critical MV and LV electrical equipment • Detailed understanding of MV system modelling, relays, protections schemes, circuit breakers, power and distribution transformers electrical switchgear, grounding and earthing

Preferred qualifications

• Previous consultant negotiation and management skills associated with design, construction and project execution

• Experience with fast track design/build projects and or multiple significant upgrade projects

• Experience with large scale technical operations or large-scale compute farms and knowledge of building codes and regulations

• Ability to research new designs, technologies, and construction methods of data center equipment and facilities and to carry new design concepts through exploration, development, and into deployment/construction

• The ability to perform complex business case analysis to justify technical decisions and present the justification to management in a high level review

Job Description :

• Responsible for the execution of civil and structural design involving the preparation of calculations and review of structural design drawings in accordance to customers' specifications, applicable codes, standards and other generally accepted practices.
• Assist in producing tender specifications and design requirements for calling of tender contracts.
• Undertake detailed design of buildings and civil infrastructures.
• Work with Qualified Person (QP) to develop design scheme for civil and structural works.
• Involve in project planning, implementation and close monitoring of projects.
• Project coordination including submission to local authorities and liaison during the construction stage.
• Liaise with clients, consultants and authorities on technical matters.

Requirements :

• Candidates must possess at least degree in Civil Engineering (preferably recognised by PE Board).
• Engineers with minimum 1 years' experience in relevant engineering design work. Conversant with latest design codes and authority requirements (Codes of practice, directives, etc.).
• With good attitude towards work and timeline.

A & One Precision Engineering was founded in 1992 and established itself as one of the leaders in the global precision engineering industry. A & One has leading technological capabilities in advanced manufacturing and currently serves customers in the Semiconductor, Aerospace, Medical Technology, Energy, Consumer Electronics and Telecommunications Industries.
As a Design Engineer, your responsibilities are:

• Support NPI (New Product Introduction) on product design and development.
• Oversee the design and documentation of components made from precision machined parts and sheet metal.
• Employ Design for Six Sigma (DFSS) tools to enhance design manufacturability.
• Conduct impact analysis to refine designs, ensuring they meet specifications, project timelines, and cost objectives.
• Participate in technical discussions and present design solutions to clients.
• Coordinate the fabrication, assembly, and validation of prototypes to ensure they meet specifications.
• Prepare drawing proposal and tooling design.
• Conduct tooling buy-o7 and hands-on tooling setup.
• Initiate and conduct the improvement project evaluation.
• Liaise with customer on design requirement and alignment.
• Liaise with factory on capability compliance.
• Responsible on tooling expenses and cost control.

Requirements:

• Min. Diploma in Mechanical Engineering/ Mechatronics Engineering/ Precision Engineering.
• Proficient in using Solidworks and/or other 3D modelling software
• Proficient in using CAD/CAM Programming
• Preferably with working knowledge and experience in tool & die, jig & fixtures design.
• Familiarity with Geometric Dimensioning and Tolerancing (GD&T) and Tolerance Stack-up Analysis.

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

Ethos Search Associates Pte. Ltd.

EA Licence No: 13C6655

EA Reg No: R1109557 Rose

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

Senior Electrical Design and Commissioning Engineer

(Marine Vessel Solution)

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday - Friday: 8.30am to 6.00pm
• S$ 4,000 - 6,000

Key Responsibilities

• Electrical Design: Collaborate on system requirements, develop schematics, select components, and design control logic for marine vessel propulsion/control systems.
• Commissioning and Integration: Oversee installation, testing, and validation of electrical systems.
• System Optimization: Analyze performance, identify optimization opportunities, and implement innovative solutions.
• Documentation and Reporting: Create technical documentation and commissioning reports.
• Regulatory Compliance and Safety: Ensure compliance with maritime regulations, industry standards, and safety guidelines.

Requirements

• Diploma/Bachelor's in Electrical Engineering or related field
• Relevant experience in electrical design/commissioning (marine propulsion/control systems preferred)
• Proficiency in electrical design software (AutoCAD Electrical, EPLAN) and simulation tools
• Knowledge of marine electrical systems, industry standards (ABS, DNV, IMO), and regulations
• Requires to travel overseas for commissioning activities (shipyards/vessels)

WhatsApp or Email your Resumé now for Interview Arrangements !

Whatsapp: +65 80231200

✉ [email protected]

Daniel Wong Reg No: R2095781

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Descriptions

• Develop and Review Test Plan based on IC design specification
• Develop constrained-Random verification environment for complex DUT
• Develop/Modify Testbenches using UVM/SystemVerilog for Pre-Silion IP or SOCs
• Implement coverage matrix using cover point and assertion
• Create and debug tests for DUT
• Resolve bugs with remote designers

Requirements

• Bachelor/Masters Degree in Electrical/Electronics/Computer Engineering with min 1 year of experience
• Hands-on experience in Silicon/ IP verification using SystemVerilog/ UVM
• Strong understanding of verification process from test plan to coverage completion
• Strong communication and Analytical skills
• Understanding of HDL (Verilog, VHDL)
• Experience with designing with FPGA using Vivado is a plus

Job Descriptions

• Develop and Review Test Plan based on IC design specification
• Develop constrained-Random verification environment for complex DUT
• Develop/Modify Testbenches using UVM/SystemVerilog for Pre-Silion IP or SOCs
• Implement coverage matrix using cover point and assertion
• Create and debug tests for DUT
• Resolve bugs with remote designers

Requirements

• Bachelor/Masters Degree in Electrical/Electronics/Computer Engineering with min 1 year of experience
• Hands-on experience in Silicon/ IP verification using SystemVerilog/ UVM
• Strong understanding of verification process from test plan to coverage completion
• Strong communication and Analytical skills
• Understanding of HDL (Verilog, VHDL)
• Experience with designing with FPGA using Vivado is a plus

Ethos Search Associates Pte. Ltd.

EA Licence No: 13C6655
EA Reg No: R1109557 Rose

- Responsible of designing the Electrical system required to operate facility projects.

- Ensure smooth and proper execution of projects/contracts

- Supervision of construction works and co-ordinate with client’s representation, consultants and sub-contractors on technical issues

- Ensure quality of work is achieved and compliance of safety regulations

- Report schedule to Project Manager

- Attend site meeting with contractor on co-ordination and resolution of site problems.

- Must have good knowledge of generator electrical installation

Job Description

Reporting to the Project Manager/Engineering Manager, successful applicants will be involved in Power supply system and switching mode power supply development activities such as electrical circuit design, magnetic design, prototyping, evaluation and assisting manufacturing in BETA run of the new product.

Key Skills & Responsibilities

• Understand customer requirement to design or modify XP product to provide Added Value (AV) Solution based on XP design criteria and procedure
• Maintain an in-depth knowledge of all XP products to identify and select the most suitable product for Engineering Solution design.
• Design new products in timely manner to meet the product spec, modify existing designs, improve existing products for better performance and /or cost
• Proposed AV or modified solution based on sales/customer requirements.
• Perform product verification & validation test such as electrical performance, thermal, EMC and DVT to ensure product meet specification before delivered to customer.
• Electrical circuit and schematic design
• Embedded systems design both in hardware
• Firmware design knowledge will be an added advantage.
• Bill of materials (BOM) creation and documentation.
• Breadboard and prototype samples making and debugging
• Design new solution/product within XP standard design practice, safety guidelines, agreed timescales and costs.
• Performed product (AV and modified model) verification and validation, such as electrical performance, thermal, EMC and DVT evaluations,
• There will be some travelling required in conjunction with customer and manufacturing support as well as outside training

Qualifications

Knowledge/Qualifications/Attributes

• Minimum bachelor’s degree in electrical/electronic or higher degree in a related engineering field.
• More than 3 years electrical design experience of power supply/power system; those with more than 5 years’ experience will be considered for senior position.
• For Senior position, Identifies, and review projects main task, schedules, and technical challenges on project delivery timely is required.
• Good project management skill and capable of leading long-term structured problem-solving projects for senior position.
• Familiarity with PCB design using Altium/PADS will be an added advantage.
• Requires good communication, reasoning, problem solving and analytical skills.
• Hardworking, dynamic, strong responsibility and a good team play

Job Responsibilities:-

• Utilize in-depth knowledge of Foundation IP to evaluate and qualify IP’s. Able to benchmark and optimize Std cells/IO’s/memory for optimum performance, area or power needs of a project
• Conduct Spice simulations to verify the performance and reliability of designs on RC extracted netlists
• Perform library characterization to ensure accurate timing, power, and area models. Stay up-to-date with industry trends and emerging technologies in library characterization and PPA analysis
• Help to develop and maintain EDA automation scripts to streamline CAD flow and design processes
• Modify and optimize IPQA scripts to improve efficiency and performance
• Analyze and understand both hard and soft IPs within SOC designs. Work with IP vendors to deliver custom specs needed for MXL project needs
• Review silicon reports and provide detailed analysis to identify and resolve issues
• Work closely with vendors and cross-functional teams to ensure successful project outcomes. Collaborate with design teams to ensure seamless integration of libraries and IP blocks
• Maintain comprehensive documentation of IP Vendor engagement. Troubleshoot and resolve issues related to IP, EDA tools and automation flows

Job Requirements:-

• Bachelor’s or Master’s Degree in Electrical Engineering, Computer Engineering, or a related field
• Minimum 10 years of experience in design engineering or a related field. Good understanding of the IC design flow, including front-end and back-end processes
• Proficiency in Foundation IP, Spice Simulation, Library Characterization, EDA automation scripts, and IP script modifications. Familiarity with library characterization tools such as Liberate, Cadence Genus, or Synopsys Library Compiler
• Strong ability to review and analyze silicon reports and provide detailed insights. Excellent analytical and problem-solving skills
• Excellent interpersonal and communication skills for effective collaboration with vendors and team members
• Experience with advanced node technologies (e.g., 8nm, 4nm, and below)
• Experience with SOC IP design and verification
• Knowledge of emerging technologies such as FinFET, FD-SOI, or III-V semiconductors
• Familiarity with industry-standard EDA tools and methodologies
• Experience with tools such as Synopsys PrimeTime, Cadence Genus, or Mentor Graphics Questa

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

Built on decades of expertise and execution, Marvell’s custom Processor/ASIC solution offers a differentiated approach with a best-in-class portfolio of data infrastructure intellectual property (IP) and a wide array of flexible business models. In this unique role, you’ll have the opportunity to work on both the physical design and methodology for future designs of our next-generation, high-performance processor chips in a leading-edge CMOS process technology, targeted at server, 5G/6G, automotive, and networking applications.

What You Can Expect

• You will work with a global team on both the physical design of complex chips as well as the methodology to enable an efficient and robust design process.
• You’ll be working hands-on to triage workflows, whether you’re running RTL code through synthesis and place and route (PnR) tools to create the physical view of the chip, analyzing performance by running timing analysis, verifying a robust power grid by performing EMIR analysis, etc.
• Verify sign-off checks for database to be ready to move on to the next level
• Review completed runs for errors or create optimizations from successful runs.

What We're Looking For

• Have completed a Bachelor’s Degree in Electrical/Computer Engineering, Computer Science, or related fields and have 1-3 years of related professional experience OR a Master’s degree and/or PhD in Electrical/Computer Engineering, Computer Science, or related fields. In your coursework, you must have completed a digital logic course and projects that involved circuit design, testing, and timing analysis.
• Have work or course experience where you created and tested a logic block, then were able to look at the quality of results to ID improvements.
• Know formulas for timing analysis and concepts for synthesis and place and route.
• Enjoy learning by doing the work and having access to guides and a mentor.
• Be willing to raise your hand and volunteer for learning opportunities you may not have experienced before.

Job Summary:

We are seeking an experienced Design Quality Engineer to lead quality initiatives for our thermal cooling solutions in the electronics and computing sectors. The ideal candidate will focus on ensuring design and process quality, driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and cross-functional collaboration, we encourage you to apply.

Key Responsibilities:

• Quality Monitoring & Yield Optimization: Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production.
• Abnormal Quality Management: Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement solutions and preventive actions.
• Process & Quality Control Enhancement: Strengthen internal quality control systems and enhance process capabilities. Lead initiatives aimed at maximizing operational efficiency.
• Customer Quality Assurance: Lead corrective actions for customer-reported quality issues and communicate preventive solutions to stakeholders.
• Inspection Process Optimization: Optimize the quality inspection process by integrating automation and cutting-edge technologies where applicable.
• Cross-Department Collaboration: Promote communication and collaboration between design, production, and other teams to ensure consistent adherence to quality standards.
• Team Leadership: Oversee the quality team’s task assignments, performance, and development, ensuring timely delivery of objectives.

Requirements:

• Bachelor's degree in the related field
• Proven experience in quality engineering, with a focus on manufacturing and design quality.
• Prefer candidates with experience in mental stamping, forging, brazing, die casting, CNC machining, milling, and other metalworking techniques.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and industry standards.
• Six Sigma certification or similar is an advantage.
• Able to communicate with Chinese clients
• Willingness to travel and work abroad in China or Vietnam for at least 10 months annually.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Please state your availability, current & expected salaries for processing purpose.

All applications will be treated in the strictest confidence.

We regret that only shortlisted candidates will be notified.

Tay Bi Hui Avery

Reg no: R23112677

EPS Consultants

95C5630

Structural Design Engineer (Iconic building projects, A1 main con)

Our client is a leading A1 main contractor with a notable record of mixed development, residential and commercial projects. They’re now looking for Senior/Structural Design Engineers/Technical Engineers/C&S Engineers for their building projects during an exciting time in their development.

Job Responsibilities

• Provide technical expertise in the design and coordination of the structural aspects of our construction projects.
• Work closely with project teams to ensure that all structural elements are designed to meet project specifications, regulations, and quality standards.
• Coordinate and liaise with relevant stakeholders to ensure the design complies with all requirement
• Prepare and present technical engineering reports, calculations, drawings, and specifications for project designs.
• Participate in the value engineering process to ensure cost-effective and efficient design solutions.

Requirements

• Degree/diploma in Civil/Structural Engineering, Construction Management, or related field
• Minimum 2 years of relevant experience, preferably with a main contractor
• Candidates with more experience can be considered for the senior position

Location: Central

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Responsibilities:

• The Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification.
• It is also expected that you will conduct periodic design reviews, including with application engineers.
• It is also expected that you will support test development and product development teams in bringing projects to production.

Requirements:

• PhD/Master’s Degree in Electronics/Electrical Engineering.
• Minimum 6 years’ experience in Analog or Mixed-signal IC design.
• Very good knowledge of CMOS processes.
• Highly proficient in analog and mixed-signal IC design EDA tools.
• Experienced in analog and mixed-signal circuit designs, such as regulators, DC-DC converters, low-power, low-noise biasing circuits and amplifiers, sigma-delta modulation and ADCs, etc
• Experience in design of high resolution, low power sigma-delta modulation preferred.
• Experience in design of ultra low power ADC preferred.
• Skilled in laboratory testing of IC prototypes.
• Knowledge of Linux operating system required.
• Experience in MEMS interface ASIC design advantageous.

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

Built on decades of expertise and execution, Marvell’s custom Processor/ASIC solution offers a differentiated approach with a best-in-class portfolio of data infrastructure intellectual property (IP) and a wide array of flexible business models. In this unique role, you’ll have the opportunity to work on both the physical design and methodology for future designs of our next-generation, high-performance processor chips in a leading-edge CMOS process technology, targeted at server, 5G/6G, automotive, and networking applications.

What You Can Expect

• You will work with a global team on both the physical design of complex chips as well as the methodology to enable an efficient and robust design process.
• You will be responsible for maintaining, enhancing, and supporting Marvell's Place and Route Flow, leveraging industry-standard EDA tools.
• Your tasks will include performing synthesis, place and route, as well as timing analysis and closure on multiple intermediate and complex logic blocks.
• You will play a crucial role in developing and implementing timing and logic ECOs, collaborating closely with the RTL design team to drive modifications that address congestion and timing issues.
• Additionally, your involvement with the global timing team will include debugging and resolving any block-level timing issues encountered at the partition level.
• This position provides an exciting platform to engage with diverse engineering challenges within a collaborative and innovative environment at Marvell.

What We're Looking For

• Bachelor’s Degree in Electrical/Computer Engineering, Computer Science, or related fields and min 10 years of related professional experience OR a Master’s degree and/or PhD in Electrical/Computer Engineering, Computer Science, or related fields with min 5 years of related experience. In your coursework, you must have completed a digital logic course and projects that involved circuit design, testing, and timing analysis.
• Good understanding of standard RTL to GDS flows and methodology
• Good scripting skills in languages such as Perl, tcl, and Python
• Good object-oriented programming skills
• Good understanding of digital logic and computer architecture
• Knowledge of Verilog/VHDL
• Good communication skills and self-discipline contributing in a team environment

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Engineer, Design in Singapore. The position will be based in our Univac Site in Woodlands.

As an Engineer, Design, you will:

Responsible for product analyzing, design for manufacturing (DFM), tool design 3D and 2D drafting, tool review and debugging.

The key responsibilities are as below:

• Construct mold design layout and conduct mold design review meeting.
• Design precision plastic injection molds in accordance with the requirements.
• Mold management and liaise closely with internal and external customers on matters relating to mold design.
• Preparation of detail bill of material and maintain thorough documentation of hardcopy and softcopy.
• Participate in the First-Off Tool review and assess the suitability of the tool for production.
• Performs other duties as assigned.

What skills and experiences are we looking for?

• Possesses at least a Diploma in Mechanical, Manufacturing, Precision Engineering, and/or any equivalent engineering discipline.
• 2 years of working experience in tool design, and/or any relevant experience.
• Experience in making LSR mold design, as well as packaging mold design is an advantage.
• Proficient in AutoCAD, Unigraphics and Microsoft Office Applications.
• Familiar with engineering drawings and GD&T.
• Ability to develop complex designs to the point of manufacture and release to production.
• Knowledge of plastics & elastomers.
• Team player with a good verbal and written skills.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: [email protected]

For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.

As a Package Design Engineer within the Package Development and Engineering (PDE) organization in Micron Technology, you will provide package definition and designs for advanced semiconductor devices. You will be working with a multi-functional team across several geographies to create package design databases such as package stack-up, simulation, route-study, substrate/lead frame layout, wire bond diagrams, and other design documentation. You will be ensure the completion of design activities within the project schedule and ensure that design outputs are within Assembly and vendor capability.

Responsibilities will include, but are not limited to:

• Conduct feasibility studies for various package options and assess designs for manufacturability and reliability.
• Work closely with multi-functional team to address packaging design challenge in the area of layout, electrical, thermal, mechanical, assembly and reliability.
• Interact with PDE assembly team and external assembly subcontractor partners to recommend package solutions to meet customer and/or market requirements
• Generate and update assembly documents in database. Provide drafting and drawing support for package drawings, interposer drawings, and manufacturing drawings.
• Support package and DFMEA reviews with assembly engineering and subcon teams.
• Support package technology development, including material selection, process development, DOEs, and related activities
• Support package technology development, including material selection, process development, DOEs (Design of Experiments), and related activities.
• Track and drive program milestones to ensure timely development execution.
• Provide design support for thermal/mechanical/electrical simulation analysis.
• Support and contribute to the Global Design, Simulation and Substrate (GDSS) team on continuous improvement efforts such as:Global design alignment activities
  Continuous improvement efforts
  Package design rules
  Package roadmaps
  Competitive Analysis review

Requirements:

• Master (preferred) or Bachelor of Science degree in Electrical Engineering or Mechanical Engineering with a minimum of 5 years of experience in semiconductor packaging industry OR PhD graduates in Electrical Engineering
• Candidates must possess a strong design knowledge of high-density (Wirebond + Flip-Chip) packaging architectures, die stack-up, packaging layout optimization.
• Excellent communication skills, both oral and written in English.
• Excellent problem solving and analytic skills.
• Experience with Cadence SIP, APD and AutoCAD software tools is preferred.
• Good understanding of Silicon IP, floorplan and Signal/Power Integrity is a plus.
• Ability to work independently, prioritize and manage numerous projects with minimum supervision.
• A global perspective and the ability to work in a multicultural environment.

Performs semiconductor design engineering assignments including engineering and designing packaging stack-up, layout checking, documenting specifications, modifying and evaluating packaging risk in the areas of electrical, thermal, mechanical and reliability. Reviews package design requirements, define the package stack-up and conduct final design review. Typically responsible for projects, or portions of projects, to design, fabricate, modify, and evaluate semiconductor Packaging.

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628