Total 1,622 structural engineer job vacancies in Art / Design / Entertainment category in Singapore

Job Description:

• Design of subsystem electronics according to top-level requirements, analogue, digital and mixed signal circuit design, simulation, schematics capture and PCB layout
• Hands-on prototyping of PCBA, circuit debugging/troubleshooting
• Design verification and planning of test criteria, test protocols and documentation of design specifications
• Anticipate the design risk and implement design risk control measures
• Assist in development and testing of firmware drivers for various subsystem modules and such as sensors and actuators (e.g. I2C temperature sensor, accelerometer, vacuum pump, solenoid valve, etc.)
• Work in conjunction with firmware development team for firmware optimization and firmware/hardware bug resolution
• Manage verification and validation activities of electronics hardware including the performance, reliability and regulatory compliance such as EMC and product safety. Implement design changes to resolve failures in a timely manner
• Actively collaborate with cross functional team members throughout the product lifecycle
• Collaborate/liaise with 3rd party contract manufacturers to oversee the PCBA production, ICT/FCT testing and validation

Qualifications/Experience:

• Bachelors/Master’s degree in Electrical/Electronic Engineering
• 3 years of work experience in product development industry. Fresh graduates with good grades can be considered for junior level position.
• Strong theoretical and practical knowledge of analogue and digital circuits, operational amplifiers, MOSFET transistors and precision circuit design. Familiarity with designs involving optoelectronics such as laser diodes, photodiodes is a plus.
• Experience in schematics capture, multilayer PCB layout design using ECAD tools. Altium Designer experience is strongly preferred
• Familiarity with C/C++ programming language is a huge advantage
• Familiar with standard digital communication interfaces such as SPI/I2C/RS232/RS422/USB etc.
• Exposure to medical device development & ISO 13485 quality management system is a plus
• Full exposure to product development life cycle from proof of concept to DFM with proper documentation is a plus
• Excellent communication skills
• Able to work independently with minimum supervision and a strong team player

RESPONSIBILITIES:

Netlist to GDSII at block level, Subsystem Level and at Full chip.

• Worked on multiple tapeouts on Netlist to GDSII

• Hierarchical partitioning and budgeting of block-level subsystems.

• Implementation of high performance (HP) cores, low power designs

• Node experience upto 7nm, 10nm, 14nm, 28nm.

• Timing Signoff in loop through STA and ECO cycle at block and at interface.

• Block level floor planning, power planning and IR drop analysis.

• Scan chain reordering / Scan Chain repartitioning

• CTS expertise and clock tree constraints creation for meeting specifications

• MMMC optimization at Block and Sub-System Level

• Timing closure with Crosstalk and AOCV / POCV

• TCL scripting to fundamentally understand tool usage.

MANDATORY EDA SKILLS

• PnR tools such as Synopsys ICC/ICC2 and/or Cadence Innovus

Job Description:

We are seeking a highly skilled and experienced Design Engineer to join our Design team. The successful candidate will be responsible for designing and developing custom mechanical systems and components for Asphalt and Concrete plants, as well as overseeing their fabrication and testing.

Responsibilities:

• Design and develop custom mechanical systems and components using CAD software (e.g. SolidWorks, Inventor, Creo)
• Collaborate with cross-functional teams including Electrical and Software Engineers, Project managers, and Fabrication Technicians to ensure successful project outcomes.
• Oversee the fabrication and testing of mechanical systems and components
• Develop and maintain project timelines and budgets.
• Perform research and analysis on materials, components, and systems to ensure optimal performance and cost-effectiveness.
• Participate in project meetings and provide technical expertise and guidance as needed.
• Ensure compliance with all relevant safety regulations and standards.

Requirements:

• Bachelor’s degree in Mechanical Engineering or a related field
• Minimum of 5 years' experience in mechanical design and fabrication
• Proficiency in CAD software (SolidWorks preferred)
• Strong knowledge of mechanical design principles and practices
• Experience with the design and fabrication of complex mechanical systems and components
• Strong problem-solving and analytical skills
• Excellent communication and interpersonal skills, ability to converse and write in English.
• Ability to work independently as well as part of a team.

Job Responsibilities

• Design and development of photoelectric sensors

• Using optical design software to design optical systems that include lens, aperture, filters with defined light source meeting sensor specification considering the mechanical and electrical tolerance

• Create detail optical test plan and perform verification and implement countermeasures

• Collaborate with Electronic Engineer to define the light source and Mechanical Engineer on the mechanical parts design

• Collaborate with cross functional teams on new and custom products development, and sustain product lifecycle including customer complaints, components obsolescence, failure analysis, etc.

• Liaising with Headquarter for technical support and technology transfer

Job Requirements

· Master/Degree in Electronic/Optoelectronic Engineering or equivalent

· Minimum 3 years of relevant experience in optical design and development

· Experience on optical system design in optical design software; i.e. ZEMAX / Optical studio

· Good knowledge in photonic design for optical sensor is an advantage

· Strong interpersonal and analytical skills

· Ability to work both independently and in a team environment

· Creative, self-driven and willing to acquire new skills and grow in the position

ALTEN Group is a world leader in Engineering and Technology consulting services providing outsourced Engineering, R&D, and IT Services for different industries such as Transportation, Defence, Energy and Security with 55,000 engineers in nearly 35 countries. ANOTECH is the subsidiary of the Group delivering ALTEN's Engineering Services in Singapore.

As a Design Engineer, you will provide engineering expertise in the area of design, analysis, and testing of DC-DC power converters.

Responsibilities:

· Responsible for engineering, design activities for electrification projects i.e. design deliverable completion, clarification meetings with client, follow up with external consultants on submissions, vendors.

· Package lead with overall responsibility for the design and execution of electrical packages for traction power systems e.g. MV Switchgear, DC Switchgear, DC Trackside equipment, Power Converters, Power Transformers, Auxiliary systems.

· Support Design team in preparation of Cable List, Cable Termination List, Station FO network Diagram.

· Develop conceptual engineering, propose and implement Value addition engineering for the projects.

· System Engineering support for the tender / bids.

· Work closely with Siemens other design teams and engineering on the customer requirement, coordinate design verification and submission to customer.

· Work closely with Project teams, Interfacing, T&C teams including coordinate with various interface partner.

· Preparation of O&M and Training Manual in consultation with Design Manager.

· Preparation of Signal list for Remote Control & Monitoring requirements in consultation with other Design Engineers.

Requirements:

· Degree in Electrical Engineering.

· Has acquired strong foundation as an Electrical Engineer in traction power systems with local project experience.

· Minimum 5 years’ experience in the electrification projects for MRT projects.

· Good experience in AC and DC Electrification systems including Control and Protections.

· Added advantage for experience on Metro Projects using 750V DC System.

· Added advantage for simulation studies for DC traction power systems.

· Good experience in handling medium to high complexity of solution projects.

· Well verse of Local transportation operators and legal requirement.

· Adaptable to different working environments and customer working terms and conditions.

· Strong and effective communicator at all levels within the Business Unit and other Business units.

· Having Good Knowledge on Power RTU, PLC system.

Job Responsibilities:

• Use computer-aided design (CAD) software to create plastic molds for manufacturing processes such as injection molding.
• Designing mold based on customer specification and requirements.
• Participate in the mold trials to ensure the parts and products are produced as designed.
• Analyse and interpret data and create new product designs.
• Prepare mold specification and checklist.

Job Requirements:

• Experience in using engineering/design software including Auto CAD, Unigraphics, SolidWorks
• Good problem solving skill
• Able to multitask and work with minimal supervision
• Excellent mold setting and tooling design

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

A well-established marine company located in Tuas is seeking Structural Design Engineer on permanent position.

Benefits

• S$ 4500 – 5500 per month
• Insurance covered for: Group H&S, Group Term Life, Group PA and Workmen Compensation Insurance
• Other leaves as per MOM regulations
• 8 am to 5 pm Mon to Fri, 8 am to 12 noon Sat
• Shuttle Bus at designated MRT stations

Responsibilities

• Design engineering structure according to technical requirements as defined by contract, class rules and specific standard within quality, time and cost given.
• Prepare and provide design calculation / BOM/ general arrangement / sectional drawings.
• Produce accurate assembly / detail drawings within an agreed time scale.
• Ensure drawing list are updated.
• Ensure production drawings and documents are completed and issued on time.
• Update and understand know-how on rules, class, authorities and etc.
• Prepare 3rd party approval submission documents.
• Investigate scope of re-work / modification brought forward by the Production.
• Able to use STAADPro is a must to perform design calculation.
• Perform engineering coordination /drafting (drawings) / checking as and when required.

Requirements

• Degree / Diploma in Engineering or equivalent.
• Software knowledge in STAADPro is a must.
• Organized, meticulous, team player with sense of responsibility.

More openings available at www.gasoil.com.sg

THE ROLE:

We are looking for highly qualified and driven individuals to join the FPGA Product Development (FPD) Silicon Integration team. You will work on full-chip and chiplet RTL development and integration for next generation FPGA and programmable SoC products. You will also work with team members across globally diverse regions. The role is based in Sinagpore.

THE PERSON:

You have a passion for modern, complex processor architecture, digital design, and verification in general. You are a team player who has excellent communication skills and enjoy collaborating with other like-minded engineers located at different sites. You have strong analytical and problem-solving skills and are willing to learn and ready to take on challenging problems.

KEY RESPONSIBILITIES:

• Integrate RTL and IP components from different design teams
• Build full-chip RTL connectivity models
• Verify full-chip RTL and models match architectural intent
• Develop custom tools and methodologies to improve development efficiency and quality

PREFERRED EXPERIENCE:

• New college graduate or 1-3 years industry experience and background in RTL (SystemVerilog) digital design
• Understanding of complex FPGA and SoC architectures
• Familiarity with digital design ASIC design flow
• Experience with RTL coding in Verilog/SystemVerilog HDL
• Experience with CAD tools such as VCS, Verdi, Design Compiler, SpyGlass, Lint, LEC, Conformal, CDC/RDC, etc. a plus
• Experience in timing constraints for synthesis and STA at SoC level with Primetime or equivalent tool a plus
• Familiarity with working in Unix/Linux environment and Version Control Software such as Subversion or Perforce
• Proficient in scripting languages such as Perl or Python a plus

ACADEMIC CREDENTIALS:

• Bachelors or Masters degree in Computer Engineering, Electrical Engineering, or equivalent

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Drilling Design Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Responsible for the creation of innovative product designs and improvement/development to existing product designs.
• Regularly engages with third parties (e.g. customers, suppliers, vendors, etc), contributing to the technical specifications development.
• Responsible for various aspects of projects and collaborates with support teams to develop operational procedures.
• Management of engineering design modifications, involving the review as well as approval of engineering’s drawings.
• Proficient in appointed meetings to ensure the compatibility, interfaces, and functionality of relevant components within associated systems.
• Attends project meetings, where technical details are presented.
• All other ad-hoc duties as assigned.

Requirements:

• Minimum Degree in Engineering or equivalent
• Minimum 6 years’ relevant working experience
• Understanding of various industry standards and offshore operations

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Job Description

Report to and is accountable to an Engineering Manager, Engineering Section Leader, or a higher titled engineer (as defined by the manager) and is responsible for performing engineering activities as defined in procedures and work instructions.

Job Duties

· Shall include performing hand or computer assisted calculations, creation of DVR packages for safety critical equipment, review and approval of engineering drawings, processing engineering design changes, interfacing with other Dril-Quip departments, participating in Engineering Design Reviews and dispositioning NCR’s.

· Additionally, this position is responsible for creating new product designs and/or improving existing product designs.

· Interacts with customers/suppliers/vendors and assists with development of technical specifications.

· Attends project meetings and presents specific aspects of engineering assignments.

· Has fundamental understanding of various industry standards (both regional and global) in addition to recommended practices.

· Can direct and mentor younger, less experienced engineering personnel.

Minimum Requirements

· Bachelor of Science degree in an engineering discipline from an accredited college or university

· Typically, a minimum of three (3) years’ experience in the design and application of engineered offshore drilling and production equipment, preferably in an oilfield equipment manufacturing environment.

Preferred Requirements

· Knowledge of connectors, diverters and mudlines will be of added advantage.

Our client is in construction industry (Grade A1 Contractor/ Class 1 General Builder) and they provide full suite of integrated construction services and solutions in both the public and private sectors.

JOB DIMENSION (SCOPE)

• Coordinate design drawings with consultants to comply with requirements of the authorities.
• Review and provide solutions to technical problems as well as plan, monitor and report shop drawing production progress.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve construction issues on drawings and liaise closely with Architectural and M&E teams as well as the authorities.
• Supervise a team of BIM Modelers to produce coordinated shop drawings and Concrete Body Plans

REQUIREMENT

• Possess a Degree in Civil/ Structural Engineering with relevant design working experience with contractors.
• Preferably a Professional Engineer registered with the Professional Engineers Board, Singapore
• At least 5 year(s) of working experience in the related field is required for this position.
• Be conversant in British & Singapore Design Standards
• Be independent, analytical, highly motivated with excellent team spirit and interpersonal skills.
• Possess prior experience working in consultancy firms (added advantage)

Job Responsibilities:

- Prepare material requisition lists for job requirements.

- Plan and design electrical switchboards, consoles and control panels according to customer's requirements and company standards.

- Prepare approval drawings, shop drawings, final drawings / documents, short circuit calculations, instruction manuals as required for submission to clients and shop floor production.

- Co-ordinate with clients and consultants on the technical requirements. Attend technical discussions with clients and consultants when required.

- Feed back to Sales & Marketing Department on the changes of technical requirements by clients for claims of additional costs and time.

- Check and follow-up on design and shop drawings with production departments.

- Develop and improve on design of electrical switchboards, consoles and control panels. While taking note of quality, standard, cost effective designs are to be considered.

- Assist and advise Sales & Marketing Department on technical matters, provide technical backup for securing of contracts.

- Carry out other responsibilities as and when assigned by the superiors.

- Follow the procedures of design control, documentation and data control, and quality system of the total Quality Management System

Job Requirements:

- Diploma in Electrical . Marina or equivalent

- 1 – 2 years of relevant experience

- Relevant experience with Switchboard Design

- Able to start work immediate

• Well Established Company
• Basic $3000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Various Location
• Working days: Monday to Friday
• Working hours: Normal Working Hours

Job Responsibilities:

• Design electrical switchboards & control panels for vessel use
• Prepare drawings, short circuit calculations, instruction manual for submission to client & shop floor production
• Co-ordinate with clients & consultants on the technical requirements; attend technical discussions
• Develop & improve on design of electrical switchboard & control panels
• Assist & advise sales dept on technical matters, provide technical backup for securing of contract
• Provide technical engineering assistance to Production with respect to manufacturing process and Bill of Materials, including the completion of assembly drawings, detail drawings, instruction sheets, testing & product terminal labelling
• Ensure all new & existing classification bodies’ rules are updated accordingly
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma in Electrical Engineering or Marine Engineering with minimum 2 years related working experience in switchboard design

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $4000 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Northeast
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• To develop, document and support the build of high precision plastic injection tooling and molded parts manufacturing
• Support Program team during upfront new project quotation stage by providing accurate upfront tooling/product DFM that matches the right quality requirements
• To meet customer for DFM and mold concept review to ensure customer’s technical requirements and concerns are translated and addressed
• Support Tooling Department by conducting internal tooling design and DFM reviews before tool launch
• Support Production in areas like molding process optimization, implement manufacturing fixtures and automation for reliability and efficiency improvements
• Support Quality Team in the design and fabrication of test/measurement fixtures
• To coordinate mold trials, tooling and molded part troubleshooting and carry out necessary engineering changes to ensure parts can be produced smoothly with the required quality
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Nitec / Diploma level or relevant qualification
• With past working experience or knowledge of Precision Tooling Design/Fabrication, Micro Plastic Injection Molding Process or Manufacturing Process Engineering related field preferred
• Required 3D CAD software skill for Siemens UG NX or PTC Creo 4.0 and above

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Up to basic $9,000 + Bonus!
• Permanent position/ 5 workdays
• Participating in the latest Railway projects in the central area
• Having experience in Railway/ LTA projects is mandatory
• Junior Site Engineer may apply for other junior Site Engineer openings.

Our client is a reputable MNC and leading A1 main contractor diverse in civil, and infrastructure projects.

Job Responsibilities:

• Reporting to the PM
• Overseeing the construction activities, planning, implementation, and monitoring work schedules in accordance with the master and detailed work program.
• Liaise with consultants for technical issues and coordinate with subcontractors on the site activities.
• Managing interfaces with other contractors working on the project.
• Prepare project progressive report to the Project Manager/Project Director.
• Prepare report and method statement.
• Monitor ongoing construction activities.

Job Requirements:

• Degree in Civil Engineering or its equivalent [Recognized by PEB, Singapore]

Other Information:

To apply please click on APPLY NOW to submit your resume with the following details :

• Reason for leaving each past & current employment
• Salary drawn for each past & current employment
• Expected Salary
• Earliest availability date

We regret only shortlisted candidates will be notified.

Lionel Cheow

EA License | 14C7092

EA Registration Number | R1105005

• Up to $3,800 Basic + AWS + Variable Bonus

• Working location: Central

• Office Building

• Over 30 years reputable company

Responsibilities

• Executing maintenance plan
• Manage & update maintenance PTW (Permit to Work)
• Coordination with Vendors on maintenance & repair
• Escalating to Engineering team for equipment failure
• Premises inspection
• Basic rectification and troubleshooting of system failures
• Assisting In Mechanical or Electrical parts sourcing

Requirement

• At least 1 years of relevant experience.

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to

[email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02c4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Job ID: Y6V4Y5V

Tel: 6950 9757

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Drilling Design Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Responsible for the creation of innovative product designs and improvement/development to existing product designs.
• Regularly engages with third parties (e.g. customers, suppliers, vendors, etc), contributing to the technical specifications development.
• Responsible for various aspects of projects and collaborates with support teams to develop operational procedures.
• Management of engineering design modifications, involving the review as well as approval of engineering’s drawings.
• Proficient in appointed meetings to ensure the compatibility, interfaces, and functionality of relevant components within associated systems.
• Attends project meetings, where technical details are presented.
• All other ad-hoc duties as assigned.

Requirements:

• Minimum Degree in Engineering or equivalent
• Minimum 6 years’ relevant working experience
• Understanding of various industry standards and offshore operations

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

Responsibilities:

• Utilize AutoCAD software and Revit to create drawing & designs for pipe network systems, mechanical layouts, and installation details.
  Review and understand the design of Mechanical, Structural, Electrical, and Architectural components.
• Participate in meetings with the consultants and primary contractors.
• Provide support for the installation of designed systems and layouts.
• Prepare bill of quantities, tender drawings, and other necessary documents for project tenders.
• Ensure all designs adhere to relevant codes and guidelines set by authorities.
  Generate drawings and other necessary for submissions.

Requirements:

• Min Degree in any related Engineering field.
• At least 1-2 years’ relevant working experience.
• Good knowledge and experience with AutoCAD software and Revit.
• Able to work independently.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Design Engineer / Drafter

Working Days: 5 days’ work week

Working Hours: 8:15 am–6 pm (Mon-Fri)

Office Location: Joo Koon

Salary Range: $2500 - $3500

Responsibilities:

• Assist project engineer design drawing & technical documentation.
• Responsible for Engineering Design & Drafting.
• Prepare & develop system P&ID and conceptual general arrangement drawings.
• Performance hydraulic calculation.

Requirements:

• Candidate must possess at least ITE/Diploma in Engineering (Mechanical/Electrical/Marine)
• Familiar with Autocad skill

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Job Responsibilities:

· Design and implementation of mixed signal CMOS IP. Development cycle including circuit design, simulation, modeling, verification and bench characterization.

· Management products utilizing leading edge sub-micron CMOS technologies, e.g., 5/6nm

· Developing state of the art high speed mixed signal IP products that include op amps, comparators, bandgap, low-drop linear regulator, ADCs, DC-DC converters, and high bit-rate (Gbps) Serdes TX/RX.

Requirements:

· Bachelor or above degree in Microelectronic or Electronic and Information Engineering

· 5 years or above experience in the area of analog design

· Good knowledge in analog IC design in high speed Serdes, e.g., PLL, CDR, CTLE/DFE, TX driver etc.

• Solid understanding and experience in key analog layout considerations such as device matching, parasitic, noise coupling, floor planning, sensitive signal routing, current density and reliability considerations
• Familiar with SPICE simulation tool (e.g., Cadence spectre, Synopsys Custom Compiler, Calibre)

· Strong Communication skills, high level of independence, self-motivation and good team player

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.

Responsibilities:

• Prepare, check and approve electrical drawings and documents
• Manage and lead a small team of engineers and drafters to fulfil project schedule and address technical issues raised by clients and other stakeholders
• Review vendor drawings and documents
• Evaluate technical proposals from vendors and suppliers to ensure technical compliance
• Provide engineering support throughout the project to multidisciplinary sections, procurement, project team, site production team, commissioning activities etc.
• Perform engineering design work including electrical calculations for cable sizing, equipment sizing, voltage drop calculations, etc.
• Participate and witness FATs, inspections, tests, sea trials, etc.
• Organize and chair meetings with clients and stakeholders to address technical queries and discussion in order to meet project contractual specifications and class requirements
• Assist in the administration, coordination, liaison between all stakeholders

Requirements:

• Min Diploma/Degree in Electrical/Power Engineering
• Experience in Electrical Design and or switchboard design is an advantage
• Electrical Marine experience is also advantage

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities

• Coordinate with internal team in Singapore liaise with customers / consultants on day to day basis
• Preparation of project documents including BQ
• Handling Design & Build projects
• Prepare optimised design solutions for projects
• Prepare Design drawings (Single Line Drawings & layout)
• Prepare design calculations incl voltage drop, short circuit current etc.
• Support multiple M&E projects concurrently
• Lead project meetings and work with team members to achieve the deliverables on-time
• Ensure drawings & documents are well maintained & stored in a timely manner
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Electrical Engineering
• Minimum 3 yrs of relevant hands-on M&E experience in construction industry, LTA projects, mixed development etc
• Need to be familiar with Singapore codes such as SS638 (CP5), SS650, SS555 etc
• Hands-on experience in AutoCAD drawings is preferred
• Familiarity in BIM (Revit / Navisworks) is advantageous
• Having consultancy experience is preferred
• Possess effective organizational and follow-up skills, meticulous
• Good communication skills
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner