Total 9,424 firmware engineer job vacancies in Engineering category in Singapore

Company Overview

The team has more than 15 years of experience developing 1G/2.5G/5GBase-T Ethernet physical layer PHY and switch chips for data centers, enterprise networks, and gateways and has successfully developed multiple generations of the most competitive products.

The company is headquarted in Kunshan, and the R&D team is located in Kunshan, Suzhou, Shanghai, and Singapore and plans to setup an R&D center in Silicon Valley.

The company is currently developing Ethernet PHY, gateway, and TSN switching chips. The target market is automotive & unpiloted driving, China's intelligent manufacturing, rail transit, and intelligent grid building industry provide domestic chips with "Independent intellectual property rights, independent and controllable.

We offer attractive salary commensurate with work experience + AWS + Bonus + Stock options

Job Responsibilities:

1. Help define analog system design specifications and architectures.
2. Lead analog designs during product development.
3. Participate in the design and realization of high-speed low-power small-area network chips.
4. Responsible for the design and verification of analog and mixed-signal circuits, particularly the CMOS signal processing circuits with profession in one of these areas, RX(e.g., AFE, ADC), TX(Serializer, DAC), PLL, LDO, ESD/EMC suppression etc.
5. Support high-level functional development and verification of analog and mix-circuit circuitry.
6. Cooperate with product definition, layout implementation, lab test and verifications.

Job Requirements:

1. Master with > 7 years' experience or PhD with > 4 years' experience in high-performance analog/mixed-signal ICs.
2. Proven experience in IC design including chip tape-out and lab evaluation of design.
3. Solid experience in using EDA CAD tools and performing Analog Custom Layout.
4. Experience in measuring IC performance and debug of design to correlate simulations to measurements.
5. Deep understanding of fundamental, including: detailed transistor level design, device physics, control/feedback loop stability analysis.
6. Direct project experience in at least one of the following areas a plus: ADC-DAC design PLL or clock/freq generation design.
7. Knowledge & experience in Verilog coding a plus.
8. Strong communication skills and good team player.

• Report to Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Carry-out regular inspections and regular checks of concerned construction activities
• Resolve technical and engineering issue
• Ensure proper documentation (including Risk assessment/Method statement) and record-keeping of construction activities
• Ensure the activities comply with the local Authorities’ quality, environment, health & safety requirements and Clients’ General Specification
• Ensuring Permit to Work (PTW) is verified and valid for assigned duties.

Job Requirements:

• Degree in Civil Engineering from a recognized university, accredited by the Singapore PE Board
• Registered Resident Engineer with IES and valid certification in Singapore (Mandatory)
• Minimum of 1 year of Engineering experience
• 2 years of experience in the supervision of construction projects preferred
• Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially piling/RC works
• Proficient in Microsoft Offic and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height
• Good interpersonal skills and hardworking
• Location : Woodlands
• Project : Viaducts

The role is responsible for Equipment Package Ownership (full lifecycle – Engineering Design, Build, Testing (FAT), Installation and Commissioning), including experience in commissioning and qualification of process equipment.

Responsibilities:

● Experience in upstream / downstream / Central services process operation, (experience in equipment design for process equipment will be an advantage).

● Project scheduling and able to come up solutions to keep the schedule on track when there are hiccups.

● Responsible for basic and detailed design, commissioning and qualification activities, including URS development, FAT, SAT, DQ, IQ, OQ and PQ.

● Review industry practices for best-in-class approach.

● Ensure that the appropriate Quality standards are applied consistent with best practice and internal Quality Standards and expectations.

● Deliver the project from conceptual through implementation phase, encompassing support for a wide range of engineering and construction requirements.

● Coordinates with different functions like manufacturing, safety, MSAT, validation and quality for implementation of changes associated with the project.

● Work independently and/or with the project manager to complete the engineering projects within schedule, budget and quality constraints.

● Agile response to equipment issue, troubleshoot and come up with solutions swiftly.

● Any other task as assigned by Supervisor/Manager.

About You:

● Diploma/Degree in Chemical Engineering, Chemistry or equivalent with at least 5 yearss experience in a process engineering role or similar role with a biologics manufacturing plan.

● At least 5 years of relevant working experience in the Pharmaceutical / Biologics manufacturing industry with experience in Process Engineer.

● In Biologics industry with understanding of cGMP requirement.

● Should have Design experience at various stages of project (Base, Detailed design).

● Able to support Installation, Commissioning & Qualification activity at site.

● Must be able to drive project.

● Any other task given related to Process.

Contract length: 12 Months. Option to extend depending on performance and business needs.

Responsibilities:

• Understand and analyse the customer’s needs;
• Find the best solution and lead the architecture definition to meet the customer requirements;
• Interface with the customer, for the technical related aspects of the solution;
• Support the sales and marketing teams by providing internal and external technical pre-sales support for the solutions and services, taking the lead of the architecture aspects in strong cooperation with all the required technical and non-technical skills involved (e.g. hardware, software, security, quality, maintenance);
• Lead the Make/Team/Buy decision process and support the partner & subcontractor choice throughout the capture & delivery activities;
• Be in charge of the executive and technical documentation for tenders and support handover to projects (including but not limited to design documentation);
• Support when needed the teams responsible for the implementation and testing of the solution by providing technical expertise on various aspects of the solution under development, ensuring the design and development goals until the final phases of the bid/project.
• Any other ad hoc duties as assigned by supervisor.

Qualifications:

• Bachelor's degree in Computer Science, Cybersecurity, or a related field.
• Experience with Thales HSM or similar cryptographic solutions.
• Strong understanding of cryptographic algorithms and protocols.
• Familiarity with compliance standards (e.g., PCI-DSS, GDPR).

Interested applicants, please email your resume to Andre Chua Jing Ming

Email: [email protected]

CEI Reg No: R1989053

EA Licence No: 99C4599

Recruit Express Pte Ltd

Job description

1. Responsible for planning the server onto racks, arranging the server mounting

2. Install the operating systems for new mounted servers

3. Responsible for reinstalling the server operation systems, solving the abnormalities.

4. Responsible for the daily server maintenance, troubleshooting, repair and follow-up

break-fix of the server and other hardware

5. Maintain data on internal systems including asset management, ticketing, rack related data

6. Work with remote vendors or other teams to solve hardware batch failures and problems

7. Oncall on duty, responsible for dealing with the problems raised by the business owner

side

8. Collect and check online assets status or issues

9. Erase drives or other configurations for retiring or relocating servers.

10. Retrofit some tools by updating or writing scripts

11. Submit and track the part RMA or media destruction process

12. Server network troubleshooting

13. Server lifecycle management

14. Other server operation related work

Job requirements

1. Bachelor's Degree in Computer science, Electrical engineering or any other relevant fields

2. Strong ability to work under pressure; Strong learning ability, broad technical interest;

Strong sense of responsibility, full of enthusiasm for work

3. Good communication skills in English, Mandarin is preferred, good team work spirit; Ability

to work independently

4. Knowledge of the interdependencies of data center functions and technologies

5. Experience with massive remote OS installation such as PXE boot

6. Can understand and run Shell or Python scripts

7. Familiar with simple automation tools, such as Ansible

8. Familiar with Linux system, able to locate hardware faults; Strong analytical and problem

solving skills

9. Basic TCP/IP knowledge concepts - Subnetting, VLANs, DNS, IPv6; Ability to perform general

troubleshooting

10. Knowledge of out-of-band/lights-out server communication methods, such as IPMI and NCSI

11. Strong documentation skills and habits

• MNC Company
• Basic $5000 - $6000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8.30am to 5.15pm
• Jurong Island. Company Transport provided
• Registered WSH Officer with MOM and Fire Safety Manager (FSM) with SCDF

Job Responsibilities:

• Interpret applicable Legal, Singapore Standards, Code of Practice & other requirements and implement & provide directions for compliance.
• Develop, maintain and periodically test out emergency response, Organize & conduct CERT audit and other emergency response relevant drills.
• Liaise with local authorities for all EHS issues, Licence renewal and represent the RC/SICA and other relevant meetings.
• Manage all EHS incident and non-conformance investigations and track corrective and preventive actions to closure.
• Organize risk assessments, site inspections and industrial hygiene and environmental samplings as well as implement or direct risk reduction and control measures.
• Conduct and organize EHS audits, trainings, meetings and promotional programs to increase employee awareness and knowledge.
• Establishing EHS objectives & Targets and its management Programme for continual improvement.
• Contractor management on In-house & SDM (Shutdown Maintenance) activities.
• Should have strong awareness on Safety Case implementation as well as Mitigative Measures for Safety Critical Events (SCE) in Major Hazard Industries (MHI).
• Establish good communication with all level and function within the organization.
• Assist in the adhoc assignment or project assign by management.
• Spearhead continual improvement projects for HSE.
• Work with HSE department in organizing Annual Safety Campaign.
• Liaise with local authorities for all EHS issues, License renewal and represent the RC/SICA/SORT and other relevant meetings.
• Other ad-hoc duties as assigned.

Requirements:

• Min Diploma in Chemical Engineering
• At least five years of primary experience handling safety responsibilities within HSE department
• At least 3 years of working experience in the oil or petrochemical industry. Preferably experienced in Jurong Island
• Must be a Registered WSH Officer with MOM and Fire Safety Manager (FSM) with SCDF
• Good command of English (spoken and written)
• Experience with ISO14001/ SS651(ISO45001) management systems

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Employment Type: 1 year contract (renewable subject to work performance)

Salary up to S$5,000

Responsibilities:

• Manage, configure, and troubleshoot hardware and software systems related to security surveillance, including IP CCTV, Perimeter Protection Systems (PPS), Physical Security Information Management Systems (PSIM), Video Management Systems (VMS), and audiovisual systems.
• Analyze, plan, implement, test, and manage integrated perimeter, video surveillance, and video analytics security systems, ensuring smooth operations.
• Collaborate with team members to meet clients' service delivery agreements and ensure seamless system functionality.
• Coordinate with contractors, clients, and partners to diagnose, resolve, and support both preventive and corrective maintenance of systems.
• Interpret and work with technical documentation, installation manuals, system drawings, and construction-related materials like floor plans.
• Assist the maintenance team to ensure system availability and reliability meets customer requirements.
• Identify opportunities to improve processes and implement new technologies for enhanced security and customer satisfaction.
• Conduct on-site electrical power and cabling work, ensuring adherence to construction safety and regulatory standards.
• Provide support during emergency situations, even outside of normal working hours, when required.
• Perform other technical-related duties as assigned.

Requirements:

• Diploma in Information Technology, Electrical/Electronic, Information Systems, or related discipline.
• 1-3 years of experience in security surveillance hardware and software administration, configuration, and troubleshooting.
• Strong understanding of IP CCTV systems, PPS, PSIM, VMS, and audiovisual systems.
• Ability to read and interpret technical documentation, system drawings, and construction plans.
• Hands-on experience in electrical power systems and cabling work, with a solid understanding of on-site operations.
• Familiarity with construction site safety regulations and protocols.
• Proven ability to work independently, manage multiple tasks, and handle pressure effectively.
• Strong problem-solving skills with excellent interpersonal, organizational, and teamwork abilities.
• Willingness to respond to emergency situations and provide support outside regular working hours.

At Coalesce Management Consulting, we are a community of people with a strong passion for excellence. We deliver bespoke project solutions within the Life Science and Technology sectors through our community of high-calibre industry specialists.

Position: Process Engineer

Job Description:

We are currently expanding our team and are looking for a process engineer on site with a client. In summary, you will be supporting the design, recipe design and testing, modification of process equipment, troubleshooting process equipment, and ensuring compliance with change control, deviation, and CAPA processes.

Key Responsibilities:

• Identify, and support implementation of engineering-based improvements or upgrades to the equipment or facility systems. This may include development of business case for improvement and identification of design requirements and then translation of requirements into process equipment/system design, specification and supporting the construction, startup, and validation of equipment.
• Support equipment maintenance programs, ensure the availability of spare parts, and coordinating maintenance execution as necessary to ensure systems are in proper working order.
• Ensure systems are installed and operating safety and in compliance with pertinent environmental health/safety practice, rules and regulations.
• Ensure necessary commissioning and qualification of systems is completed in alignment with GMP requirements and interact with regulatory inspectors as necessary.
• Providing troubleshooting support to reduce production downtime. This will involve leading and/or supporting technical root cause analysis and implementation of corrective/preventive action.
• Support new product/technology introductions by performing engineering assessments, implementing equipment modifications, and supporting engineering runs.
• Communicating proactively with supervisor and support staff, highlighting issues and proposing solutions
• Create, review, revise and approve technical reports and engineering documents such as URS, FS, SDS, P&IDs, etc.
• Serve as a lead in holding meetings for risk assessments and hazards analysis of SMEs s e.g. microbial control risk assessments.
• Support the technology transfer of new products/processes e.g. perform field testing.
• Collaborative Work: Collaborate with multidisciplinary teams to achieve project objectives.

Requirements:

• Bachelor's degree in a relevant life science field (e.g., biology, biotechnology, biochemistry). ·
• Excellent communication skills, both written and verbal, in English.
• Ability to multitask and work in a fast paced environment with competing priorities.
• Great team player. Strong interpersonal and communication skills and ability to develop close working relationships and work collaboratively with internal and external contacts at all levels

What’s In It for You?

• Exposure to the major Pharmaceutical Companies in the industry.
• Annual leave benefits.
• Full Health coverage and benefits.
• Training and Development allowance.

What's Next?

If you are interested in applying for this position, please send an email to [email protected].

Coalesce Management Consulting operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation, or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Job Scope
Perform daily monitoring, maintenance, and troubleshooting of backup jobs on platforms (MS Active Directory, Exchange, Oracle, SQL Server, Windows, VMware, and UNIX servers).
Manage and support Storage systems, including vulnerability remediation, capacity management, configuration management, provisioning and zoning of new servers using SAN switches.
Analyse backup software performance accordingly to meet client needs and monitoring of scheduled backups to ensure success or take remedial action for failures
Provide backup system data statistics to management.
Perform regular DR (Disaster Recovery) test plan of backup data restoration and storage replication availability.
Monitor usage and performance of storage and perform capacity planning for storage growth to management.
Manage storage and backup changes through change request process & provide status reports to the relevant parties.
Respond promptly to incident, investigate & provide temporary &/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.
Monitor the agreed service level, document & maintain the configuration of the systems; provide regular reporting to relevant parties.
Ensure service levels meet requirements. Propose and implement action plan when required.
Expected to work during off-peak hours on system activities (e.g. patching, upgrade)
Identify, research, and resolve technical problems
Be able to effectively operate within set guidelines, policies and procedures, and able to execute instructions with minimal supervision
24x7 Operations Support
​
Who we are looking for
Degree/Diploma in Computer Information system or related field
Preferred knowledge in EMC Networker / EMC Data Domain / VEEAM
Proficient in storage and backup 3 - 5 years relevant working experience (Preferably in Business Continuity Planning / Disaster Recovery)
Working knowledge in Veritas Netbackup / EMC ISILON / EMC VMAX / EMC POWERMAX would be good but not a must.
Understanding of orchestration and automation methodologies pertaining to the specific needs of service provider environments.

Responsibilities:

• Supervise and coordinate subcontractors works to achieve daily work schedules and to ensure compliance with specific requirements
• Assist the Project Manager in planning and monitoring of construction activities and production of shop drawings
• Liaise with relevant consultants and authorities on technical and engineering matters
• Monitor and coordinate the work of Sub-cons and Supervisors
• Coordinate the inspection of Civil and Structural works

Requirements:

• Candidate must possess Bachelor's Degree in Civil Engineering
• Preferably with working experience in foundation works
• Proficient in Microsoft Office and knowledge of AUTOCAD
• Independent, diligent and highly motivated with excellent team spirit
• Willing to work overtime including weekends and public holidays when necessary

Applicants are to email to [email protected]

Responsibilities:

• Supervise and coordinate subcontractors works to achieve daily work schedules and to ensure compliance with specific requirements
• Assist the Project Manager in planning and monitoring of construction activities and production of shop drawings
• Liaise with relevant consultants and authorities on technical and engineering matters
• Monitor and coordinate the work of Sub-cons and Supervisors
• Coordinate the inspection of Civil and Structural works

Requirements:

• Candidate must possess Bachelor's Degree in Civil Engineering
• Preferably with working experience in foundation works
• Proficient in Microsoft Office and knowledge of AUTOCAD
• Independent, diligent and highly motivated with excellent team spirit
• Willing to work overtime including weekends and public holidays when necessary

Applicants are to email to [email protected]

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

• Assist Project Engineers on site
• Monitor site progress and schedule
• Manage to set out, level and survey the site
• Responsible for checking/advise of plans, drawings and qty for accuracy of calculations of area are followed correctly.
• Responsible to ensure all materials used and work performed area are in accordance with the specifications and budget.
• Supervise of project crews and subcontractors
• Coordination work with authorities, clients and QP
• Ensure safety,health & security in charge area

Requirement:-

• Minimum degree holder in Civil Engineering (Recognised by PE Board)
• Minimum 3 years experience in civil engineering
• Able to work under fast environment

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Planning the detail construction methods, sequences, and procedures, and in liaison with the subcontractors under the direction and instruction of the Construction Manager.

· Directing the field construction works with strict control, especially on works activities that been identified to be hazardous and of high risky and ensuring their compliances of safe work practice.

· Ensuring all the works to conform to the Specifications, Works sequence and methods of construction.

· Identifying nonconformities and reporting them to the Construction Manager and Quality Management Representative.

· Supervising the field construction works including safety arrangements.

· Coordinate with Site Engineers of the subcontractors’ works.

· Carrying out or attending inspections and monitoring the progress of the works.

· Handling Engineering matters including work procedures and shop drawings.

· Managing the subcontractors and workers.

· Implementing the Quality System in the field construction works.

· Produce working schedules of short terms and keep records of the works.

· Ensuring that work schedules are followed and achieve milestones dates.

· Reporting to the Construction Manager if any changes and conflicts are ordered or found in the construction.

Qualifications and Education Requirements:-

· Minimum 10 years of relevant experience after obtaining a Degree in Civil Engineering recognised by the PE board, or other qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer or Degree in the relevant field subject to the acceptance by the Engineer and minimum 5 years of experience in the construction supervision of major underground structures of a similar nature.

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quotation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• Draft and compile technical documentation, such as datasheets, proposal designs, clarification notes, and responses to tender specifications.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience.
• Proficient in Microsoft Office and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Job Description & Requirements

Responsiblities :

1. At least 2 years IT Service Desk experience or,

2. At least 1 year in IT Remote Support experience or,

3. At least 1 year IT Onsite/Desktop Support Experience

• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

About TikTok

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

About the Team

The e-commerce industry has seen tremendous growth in recent years and has become a hotly contested space amongst leading Internet companies, and its future growth cannot be underestimated. With millions of loyal users globally, we believe TikTok is an ideal platform to deliver a brand new and better e-commerce experience to our users. Our product engineering team is responsible for building an e-commerce ecosystem that is innovative, secure and intuitive for our users. We are looking for passionate and talented people to join us as we drive the future of e-commerce here at TikTok.

Our software engineers for product infrastructure role combine software and systems engineering disciplines to run high-performance, large-scale distributed infrastructure. This means you will be deeply involved in the developmental lifecycle of critical software services, collaborating closely with product engineers to combine software code and systems knowledge to ensure that TikTok e-commerce's services are reliable, fault-tolerant, efficiently scalable and cost-effective. You will also be leveraging your software engineering expertise to develop software platforms and tools to optimise the operational and engineering efficiencies of complex systems at scale, with particular focus on improving the systems' observability, performance and maintainability.

Responsibilities

- Safeguarding the stability and reliability of TikTok's e-commerce database system.

- Deep understanding of e-commerce business, systematic database optimization and risk governance.

- Perform database fault discovery, localization, and stop-loss capability building to improve database anomaly recovery speed.

- In-depth understanding of database design for e-commerce business, working with R&D on database architecture design and optimization.

- Lead resource management and optimization of TikTok's e-commerce database.

- Research, design, and develop computer and network software or specialised utility programs.

- Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.

- Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.

Qualifications

- Bachelor's or higher degree in Computer Science, Information Technology, Programming & System Analysis, Science (Computer Studies) or related discipline.

- Candidate should have at least 5 years of experience in MySQL, Redis, etc., with experience in large-scale database cluster management.

- Proficient in the architecture of mainstream databases, able to carry out reasonable database selection and design.

- Proficient in database optimization with independent database troubleshooting skills.

- Good communication, collaboration and facilitation skills.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Key Responsibilities:

• PAM Solution Design: Design and implement sustainable Privileged Access Management (PAM) solutions using CyberArk, translating access rights requirements into effective configurations.
• Configuration and Documentation: Configure, test, and document CyberArk solutions in collaboration with the PAM Product Manager, ensuring comprehensive training and knowledge transfer.
• User Collaboration: Engage with product managers, architects, and users to refine role and authorization (R&A) requirements, conducting workshops and user tests to validate PAM designs.
• Product Support: Provide Level 3 support, overseeing user acceptance testing and facilitating training sessions. Support users post-implementation and manage change requests.
• Documentation and Reporting: Maintain up-to-date documentation of the IAM product, including user guides and functional specifications, while proactively identifying improvements for user experience.

Key Requirements:

• Bachelor’s degree in Computer Engineering, Business, or Design; CyberArk/PAM certification is mandatory. ITIL certification is a plus.
• Minimum of 5 years experience within international organizations, with strong experience in implementing CyberArk/PAM solutions and conducting rollouts.
• Extensive knowledge of PAM and CyberArk, with a solid understanding of cybersecurity principles. Familiarity with Agile methodologies is a plus.
• Excellent written and verbal communication skills, with the ability to facilitate workshops and provide knowledge transfer.
• Must be able to accommodate European working hours for project collaboration and issue resolution.
• Knowledge of SoD concepts is a bonus.

Responsibility

• Co-ordinate and supervise site works and subcontractors.
• Keep track of the site schedule to ensure works are on time.
• Able to interpret drawings and calculations of site materials
• Liaise with QS to monitor work schedule , claim and Vos.
• Report to Construction Manager / Project Manager on site matters and progress of work.
• Attend to site meetings
• Compliance to safe work procedures and maintain good house-keeping

Requirements:

• At least Bachelor's Degree or equivalent in civil engineering or equivalent.
• At least 5 years experience in civil engineering , relevant experiences in construction of civil infrastructure project , LTA project.
• Practical experience and knowledge of tendering works
• Good command of English
• Able to draw 2D / 3D

Role: Middleware Engineer

JD:

What We’re Looking For:

Redhat Jboss

MQ

Fuse AAP

Design and implement middleware engineer to support application integration.
Troubleshoot and resolve middleware-related issues promptly.
Monitor performance and optimize middleware solutions for efficiency.
Collaborate with development teams to ensure seamless integration of services.
Stay updated on industry trends and best practices related to middleware technologies.
Ensure security measures are implemented within middleware solutions.

Experience in the WOG environment.

• Setup and maintenance of desktops, laptops, phones, printers, peripherals and mobile devices – Windows and Apple Platforms

• Escalate and work with second or third level support/third party vendor on resolution of problem when necessary

• Maintain hardware inventory at assigned locations

• Provision new users with hardware, software and account setup

• Provide with both remote and onsite support for multiple locations, if required

• Troubleshoot and resolve a variety of technical problems

• Assist with network connectivity issues

• Provide great communication and customer service to company employees in person and through phone calls and emails

• Work on assigned tasks and projects including hardware and software rollouts

• Work with hardware / software vendors, whenever required

• Provide training when needed help facilitate users requests and in the implementation of company project

• Provide VPN support including end-user setup and problem

• Work closely with other support teams (client support team, application support team, server support team)

• Develop and document IT operational processes whenever required

• Manage Active Directory - User/ID creation, delete, reset, update, distribution, list/security and accesses

• Assist on AV setup in meeting rooms for conference calls and meetings

• Provide regular checks and maintenance on system health of the meeting rooms

• Provide back-end support for live event broadcast

• Support ad-hoc IT project deployments

• Attend meetings to update current projects

• Attend trainings provided by the company

• Perform procurement/RMA duties as and when required and liaise with vendors, keep track of orders and update users or IT team on delivery status

• IT Asset Management

At Coalesce Management Consulting, we are a community of people with a strong passion for excellence. We deliver bespoke project solutions within the Life Science and Technology sectors through our community of high-calibre industry specialists.

Position: Automation Engineer (PLC / Delta V)

Job Description:

We are currently expanding our team and are looking for an Automation Engineer on site with a client. In summary, you will be supporting the designing, implementing, and maintaining automated systems in the biopharmaceutical manufacturing environment. This role involves ensuring the efficient and compliant operation of automated equipment and systems.

Key Responsibilities:

• Develop and manage change control processes specific to the pharmaceutical industry.
• Manage and execute PLC projects from inception to completion, ensuring they are delivered on time, within budget, and to the required quality standards.
• Design and engineer hardware components for PLC systems, ensuring they are robust, reliable, and meet project requirements.
• Provide on-site support and troubleshooting for PLC systems, addressing any issues that arise during installation, commissioning, and operation.
• Perform Preventive Maintenance of Automation systems as scheduled.
• Identify and address issues at recipe level as well as 3rd party interfaces with Automation systems.
• Provide technical expertise and troubleshooting for DeltaV systems and related equipment.

Requirements:

• Bachelor’s Degree and 4-7 years of experience in Process Automation, preferably in a batch manufacturing environment.
• Strong knowledge in SCL will be advantageous.
• Familiar with documentation in a highly regulated environment
• Ability to work independently and collaboratively
• Good understanding in customer's voice and quality requirements is a must
• Strong team player, able to effectively work within and across teams
• Ability to tactfully negotiate and positively influence peers, knowledge and experience in digitalization are added advantages

What’s In It for You?

• Exposure to the Pharmaceutical MNCs in the industry.
• Annual leave benefits.
• Full Health coverage and benefits.
• Training and Development allowance.

What's Next?

If you are interested in applying for this position, please send an email to [email protected].

Coalesce Management Consulting operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation, or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Responsibilities of Process Engineer

· Process Technology development for Silicon wafer manufacturing

· Manage wafer manufacturing process in achieving quality, yield, quality and production targets.

· Collaborate with Technology counterparts globally on process alignment and qualification of new processes, suppliers and consumables if needed

· Work with cross-functional teams on process capability improvement and yield enhancement projects

· Coordinate troubleshooting of process issues and yield losses

· Drive for continuous process improvement and permanent solutions to resolve chronic process and quality issues.

· Develop best practices, routines and innovative solutions for continuous improvement

· Perform Statistical data analysis for process improvement and interpretation of data

· Apply problem solving methods (8D, Fishbone, DOE etc.) and risk analysis (like FMEA)

Requirements of Process Engineer

· University degree in Engineering or Science

· At least 5 years relevant working experience in semicon/ manufacturing industry

· Knowledge of quality management systems, data analysis, Design of Experiments (DOE) and statistical process control (SPC)

· Proficient in statistical software like JMP, visual basic, database and queries will be an added advantage

· Self-motivated and able to work well in a team

· Good analytical and communication skills

· Willingness and curiosity to learn attitude

The Process Engineer will spearhead the design, implementation, and optimization of wastewater treatment processes within our projects. This role collaborating with various departments, and implementing cutting-edge technologies to advance project goals. This role requires a deep understanding of chemical, physical, and biological treatment methods, strong project management skills, and a commitment to environmental sustainability.

Roles & Responsibilities:

• Develop detailed process designs for complex wastewater treatment projects.
• Lead pilot studies and data collection efforts to validate process concepts.
• Create process flow diagrams (PFDs) and piping and instrumentation diagrams (P&IDs).
• Perform detailed calculations related to plant process design and prepare system operation & control philosophy.
• Work closely with multiple disciplines to ensure quality and competitive proposals are developed and delivered on time.
• Support Business Development on technical presentations and/or meetings with potential or existing clients.
• Participate in preparing the design specification, Bill of Quantity (BQ), and Request for Quotation (RFQ) and assist in selecting equipment and components.
• Assist in project implementation, including process-related document preparation and technical clarification with client.
• Participate in testing and commissioning work.
• Any other works as instructed by the company management.

Objectives of this position:

The objective of the position is to manage the extract/transform/load processes ensuring the data availability.

Responsibilities:

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

•Design, create, modify extract/transform/load (ETL) pipelines in Azure Data Fac-tory ensuring efficient data flow from source to destination.

•Ensure data accuracy and data integrity throughout the ETL processes via data validation, cleansing, deduplication, and error handling to ensure reliable and us-able data being ingested.

•Monitor the ETL processes and optimize ETL pipelines for speed and efficiency, addressing bottlenecks, and ensuring the ETL system can handle the volume, ve-locity, and variety of data.

•Participate in data modeling, designing of the data structures and schema in the data warehouse to optimize query performance and align with business needs.

•Work closely with different departments and IT team to under-stand data requirements and deliver the data infrastructure that supports business goals.

•Provide technical support for ETL systems, troubleshooting issues and ensuring the continuous availability and reliability of data flows.

•Ensure proper documentation of data sources, ETL processes and data architecture.

Requirements:

3 to 5 years of data engineering in Snowflake

3 to 5 years in upstream / downstream Retail industry and/or Supply Chain / Manufacturing domain

Sound Understanding of data quality principles and data governance best practices

Proficiency in data analytics languages like Python, Java, Scala, etc.

Knowledge of big data technologies like Hadoop, Spark and distributed computing frameworks to manage large scale data processing.

Proficient in using version control systems like Git for managing code and configurations.

SnowPro Core Certification and SnowPro Advanced Certification will be advantage