Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.

Joining Arup

Arup’s purpose, shared values and collaborative approach has set us apart for over 75 years, guiding how we shape a better world.

The Fire Engineer will be working in a specialist team of experienced engineers covering a broad range of skills relating to the fire industry. This role should have completed fire engineering OR related tertiary studies or a professional with a skill that complements fire engineering that are able to bring knowledge of your discipline and the team.

The Opportunity

• Involve in all types of fire engineering design projects, providing detailed technical input across abroad range of projects within the fire engineering business and related areas.
• Undertake the design, engineering, and documentation, provide specialist input, resolve technical problems, and ensure quality of products and services on projects.
• Ensure own work quality is maintained at the expected technical standard, according to Arup’s Quality Management Systems.
• Communicate effectively with external stakeholders and effectively manage the time, quality and performance of small projects with minimal supervision
• Meeting deadlines, monitoring budgets and controlling expenditure to meet financial targets in your own area as well as prepare project reports for clients to summarize the key issues and strategically advising on the best outcome.

At Arup, you belong to an extraordinary collective – in which we encourage individuality to thrive. Our strength comes from how we respect, share and connect our diverse experiences, perspectives and ideas.

You will have the opportunity do socially useful work that has meaning – to Arup, to your career, to our members and to the clients and communities we serve.

Is this role right for you?

• Recognized relevant tertiary qualifications in Engineering, specializing in Fire Engineering or relevant area with minimum 3 years of experience.
• Recognized qualification for application of FSE registration is an advantage.
• Hands on experience in fire engineering in Singapore; working knowledge of computational fluid dynamics (CFD) smoke modelling and evacuation modelling.
• Be fully aware of all legislative requirements and other regulations governing Occupational Health and Safety.
• Attention to detail with problem-solving and analytical skills with the ability to stay informed about changing fire safety codes, standards and regulations.

What We Offer You

At Arup, we care about each member’s success, so we can grow together.

Guided by our values, we provide an attractive total reward package that recognises the contribution of each of our members to our shared success. As well as competitive, fair, and equitable pay, we offer a career in which all of our members can belong, grow and thrive – through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do.

We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup’s legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling eligible members to share in the results of our collective efforts.

Please see a list of Arup’s Singapore benefits below:

• Hybrid working policy & flexible working hours
• 13th month bonus
• Birthday leave
• Purchase Additional leave of up to 20 days (permanent employees)
• Paid parental leave for birth mothers 16 weeks & new parents (excluding birth mothers) 4 weeks
• Marriage leave (3 days)
• Examination leave (2 days)
• Family care leave
• Paid Annual subscription to relevant Professional association
• Reimbursement of Professional Engineers application and examination Fees
• International mobility opportunities
• QP allowance
• Site Allowance
• Work related travel insurance
• Dental expense cover
• Bike Loans of up to SGD2000

Different people, shared values

Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We are an open environment that embraces diverse experiences, perspectives, and ideas – this drives our excellence.

Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Arup provide an environment where you will make a positive difference. Discover more about life at Arup at www.arup.com/careers/your-life-at-arup.

We are committed to making our recruitment process and workplaces accessible to all candidates. Please let us know if you need any assistance or reasonable adjustments throughout your application or interview process, and/or to perform the essential functions of the role. We will do everything we can to support you.

Our Application Process

Please apply directly through our applicant tracking system. Shortlisted candidates will be contacted by Talent Acquisition to discuss next steps. Stay safe online – Arup will never ask for your bank details as part of our recruitment process.

Arup does not accept unsolicited resumes from recruiters or employment agencies.

Geotechnical Engineer

Visit www.ourengineers.com

Undertake detailed design in Geotechnical field for different nature of projects
Develop design concepts and construction methodologies and provide leadership in sectional project execution
To liaise with Client, Client’s Consultants, Contractor, and Local Authorities to obtain design approval

Description:
Degree recognised by PE Board (Singapore).
3-5 years relevant experience in consulting firms (those above 5 years experience will be considered for Senior Engineer post)
Familiar with geotechnical design software such as Plaxis, RocScience, etc
Experience in design of deep excavations, foundations, ERSS, tunnelling, pipejacking, slope stabilisation, soil improvement, etc
Experience in civil, infrastructure, utilities, coastal and marine works

• L2 Systems Administration
• Microsoft 365 cloud technologies
• Azure cloud technologies

Job Scope:

• Perform L2 Systems Administration in system monitoring, management, disaster recovery and capacity planning
• Perform on-prem and cloud system management in Microsoft, AIX, Virtual (VMWare or Hyper-V), Azure and Microsoft 365 cloud infrastructure such as Entra ID, Exchange Online, SharePoint, Teams, etc
• Participate in design, system set-up and configuration, implementation and deployment of new servers and Azure Cloud Technologies
• Plan and manage IT resource for tasks / projects including budgeting and capacity planning
• Update technical documentation pertaining to systems administration for on-premise system, Azure and Microsoft 365 cloud infrastructure
• Perform system maintenance, upgrade, patches and incident resolution outside of working hours when required
• Any related ad-hoc duties as assigned

Requirements:

• Possess Certifications in Azure / Microsoft 365 technologies is advantageous
• Possess experience in system support and server administration including implementing and managing cloud infrastructure with strong understanding of cloud technologies
• Hands-on experience on administrating on premise’s Windows Server, VMWare vSphere and Hyper-V
• Hands-on experience on administrating Microsoft 365 cloud technologies such as Exchange Online, Entra ID, SharePoint Online, Microsoft Defender and Microsoft Intune
• Hand-on experience with implementing and configuring Azure & Amazon Web Services cloud technologies such as virtual machines, application services, load balancer, SQL Managed Instance, site to site VPN, storage solutions, network, security, logging and monitoring
• Knowledge on AIX/ Unix and other IBM products. (IBM WebSphere MQ, WebSphere, Tivoli Storage Manager Backup) will be an advantage
• Possess good communication, problem-solving skill and analytical skills
• Project management experience

To apply please click on the APPLY NOW button or email your resume with the following details inside your resume for faster processing:

• Reason for leaving each past & current employment

• Salary drawn for each past & current employment

• Expected Salary

• Earliest availability date

We regret only shortlisted candidates will be notified. By submitting any application or résumé to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Yoong Poh Feng

EA License | 14C7092

EA Registration Number | R1105076

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Responsibility :

• Perform all roles and responsibilities required of site supervisors under the Building Control Act, regardless whether their names are stated in the form BEV_B1;
• Ensure that all the civil & structural and M&E works are constructed in accordance with drawings and specifications and the Building Control Act and Regulations;
• Lead the RTOs to monitor, supervise and inspect works as directed by CAG, the project consultants, QPs and/or SRE;
• Check and assess temporary works and ERSS by the contractors to ensure that the C&S, M&E and building works are safe and in compliance with all relevant regulations;

Qualification:

• Minimum six (6) years of relevant experience as a mechanical and electrical engineer, of which at least 3 years shall be in supervision of works similar in nature to the Works, i.e. in particular major construction works in buildings, services laying and testing and commissioning;
• Possess a Mechanical and/or Electrical engineering degree recognized by the Professional Engineers Board of Singapore;
• Lead M&E site staff to monitor, supervise and inspect works as directed by CAG, QP(S), QP(Geo), SRE and/or, the project consultants and FUI owners. He must possess good leadership qualities, organisational and inter-personal skills;
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report;
• Possess strong supervision and leadership skills.

Duties & Responsibilities

• Prepare, interpret and evaluate stress/vibration result.
• Review piping layout and piping information.
• Review piping engineering progress against approved schedule.
• Evaluating changes and taking corrective action when required.
• Provide technical guidance, executing and coordinating the above responsibilities to ensure timely completion and meets project schedule and budget.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements

• Bachelor’s degree in Mechanical Engineering.
• Minimum 10 years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support.
• Good knowledge of Caesar II.
• Interpretation of stress/ vibration analysis report.
• Basic knowledge of AutoCAD.
• Basic knowledge of 3D model review through Naviswork or SPR.
• Strong analytical and reasoning abilities.
• Good interpersonal and communication skills.

• Singapore Based (Bukit Merah)
• 5 Days 8.30am to 6pm
• Salary - $2000 to $3000 + OT
• ITE or Diploma in Electrical / Electronics; 1 year working experience in installation in the field of People Counting System, CCTV, Electronic Article Surveillance (EAS), Alarm System, Trouble Shooting, PC literate.
• Career Progression Opportunities

Requirements

• At least ITE or Diploma in Electrical / Electronics
• 1 year working experience in installation in the field of People Counting System, CCTV, Electronic Article Surveillance (EAS), Alarm System, Trouble Shooting, PC literate
• Must have Class 3 license
• Knowledge of electrical & electronics

Job scope

• Report to the Asst. Service Manager
• Responsible for project, implementation, installation, testing & commissioning of the system
• To carry out the maintenance works and services according to the maintenance contract.
• To manage and supervise the work progress of each project site by attending regular site meetings, coordinating with appointed sub-contractors of various services to see to ensure that projects are completed on schedule.
• To ensure proper and accurate records and documentations for the repair & servicing
• To standby and attend service calls

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description:

• Oversee the implementation of new process and procedure.
• Evaluate and review current process performance to optimize productivity and workflow.
• Preparing reports and analyzing costs and feasibilities to ensure the budget constraint.
• Perform risk assessments of the equipment and processes being used as well as hazard identification.
• Assist process technicians in troubleshooting and investigating if any problems that arise with processes, procedures, and operations.
• Audit current plant process safety related issue for improvement.

Job Requirement:

• Good interpersonal and communication skill
• Preferable with process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Strong problem solving and analytical skill

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Responsibility :

• Perform all roles and responsibilities required of site supervisors under the Building Control Act, regardless whether their names are stated in the form BEV_B1;
• Ensure that all the civil & structural and M&E works are constructed in accordance with drawings and specifications and the Building Control Act and Regulations;
• Lead the RTOs to monitor, supervise and inspect works as directed by CAG, the project consultants, QPs and/or SRE;
• Supervise concreting, pavement, drainage construction works (applicable for C&S);
• Carry out checks on compaction and curing of concrete (applicable for C&S);
• Carry out checks on striking of formwork, re-props and removal of props (applicable for C&S);
• Carry out checks on quality & erection of precast components (applicable for C&S);

Qualification:

• Minimum four (4) years of relevant experience as a civil & structural engineer, of which at least 3 years shall be in supervision of works in projects similar in size and complexity; in particular deep excavation and foundation, cut and cover tunnel works and building works;
• Possess a civil and structural engineering degree recognised by the Professional Engineers Board of Singapore;
• Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore;

• Mentorship, guidance, and training will 100% be provided
• Great for fresh grads who want to start out in the engineering field

• Responsibilities:
• Design, prepare shop drawing, methods statements, quality installation, inspection, testing and commissioning, documentation works for BMS system.
• Site coordination, project schedule planning, coordinate site works
• Design and deploy BMS controlling and building automation system.
• Project Management and attend project meeting.
• Provide training to customers.
• Provide testing and commissioning services

Requirements:

• Min Diploma / Degree in Engineering (Mechanical / Electrical Engineering / Construction / Building related)
• Able to define BMS project work scope, requirements and specifications, and identify, allocate resources for executing the project from start to completion.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

We are looking for a Staff Analog Layout Engineer to contribute to the development of High-Speed Connectivity, Broadband Analog and Computing/Storage-Memory Data-Transport products (including functional blocks such as high-speed digital, multi-GHz ADC/DAC, PLL/DLL serial and parallel I/O, and clock generation/distribution for custom ICs). The candidate must have a proven record of laying out high-performance analog circuits in state-of-the-art CMOS process technologies, successfully performed top-level integrations, and placed products into volume production multiple times.

Requirements

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and at least 5+ years of related professional experience.
• Master’s degree in Computer Science, Electrical Engineering or related fields with 3+ professional experience.
• Deep understanding of layout methodology from initial chip planning to tape-out.
• Deep understanding parasitic optimizing in layout
• Experiences in advanced process technology and Fin-FET is preferable.
• Have a high level of proficiency in interpretation of CALIBRE DRC, ERC, LVS, etc. reports.
• Have a high-level proficiency/knowledge of Synopsys or CADENCE layout entry tools.
• Programming skills in any of the following are a plus: Skill or Ample or Perl, etc.
• Strong technical and analytical background, problem solving skills, etc.
• Fluent in English

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

Roles and Responsibility:

• Preparation of Piping Material Specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To calculate/validate pipe wall thickness, branch reinforcement etc.
• To prepare line index, Material summary (BM/BQ).
• To carry out engineering support work during the construction phase of the project.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Minimum of Ten (10) years in the field of piping engineering involving material, design, production work, 3D model review, stress and construction engineering support.
• Bachelor’s Degree in Mechanical Engineering or equivalent combination of education and experience.
• Good knowledge and experience of ASME, ASTM, BS and other relevant standards.
• Basic knowledge of AutoCAD/AP3D/S3D.
• Basic knowledge of 3D Model review through Navisworks or SPR.
• Strong analytical and reasoning abilities.
• Good leadership skills.
• Good interpersonal and communication skill.

• Report to Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Carry-out regular inspections and regular checks of concerned construction activities
• Resolve technical and engineering issue
• Ensure proper documentation (including Risk assessment/Method statement) and record-keeping of construction activities
• Ensure the activities comply with the local Authorities’ quality, environment, health & safety requirements and Clients’ General Specification
• Ensuring Permit to Work (PTW) is verified and valid for assigned duties.

Job Requirements:

• Degree in Civil Engineering from a recognized university, accredited by the Singapore PE Board
• Registered Resident Engineer with IES and valid certification in Singapore (Mandatory)
• Minimum of 1 year of Engineering experience
• 2 years of experience in the supervision of construction projects preferred
• Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially piling/RC works
• Proficient in Microsoft Offic and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height
• Good interpersonal skills and hardworking
• Location : Woodlands
• Project : Viaducts

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Ship electrical system design
• Electrical Load Schedule
• Electrical Single Line diagrams
• Short Circuit calculation
• Circuit breaker calculation
• Electrical equipment selection
• Electrical cable schedule, Cable tray layout, MCT design, cable route preparation, termination diagram
• Preparation of electrical material take off
• Possess good knowledge in automation integrations such as vessel ISCS, VRCS, AMS, etc.
• Prepare design drawings and documentation
• Project management, Project scheduling, client interaction, site visit (client office, ship, etc)

REQUIRED QUALIFICATIONS AND SKILLS

• Bachelor Degree in Electrical Engineering
• At least 3 years of working experience in the marine sector

Join us as we pursue our exciting new vision to make machine data accessible, usable and valuable to everyone. We are a company filled with people who are passionate about our product and seek to deliver the best experience for our customers. At Splunk, we’re committed to our work, customers, having fun and most importantly to each other’s success. Learn more about Splunk careers and how you can become a part of our journey!

As a Splunk Solutions Engineer (SE), you’ll be the primary technical resource for the assigned Enterprise accounts specifically covering the regional assigned market Indonesia. Our clients and partners span all business sectors and sizes.

This is an opportunity to work at a company that is changing the way information supports business decisions. You will be responsible for actively driving and running the technology evaluation stage of the sales process, working in conjunction with the sales team as the key technical advisor and advocate for our products and services.

Splunk Sales Engineer will answer technical inquiries from customers regarding Splunk technology, features, solutions, applications as well as eloquent Splunk technology and product positioning to both business and technical users. You will identify all technical issues of your assigned accounts to assure complete customer happiness through all stages of the technical sales cycle, and you should also establish and maintain positive relationships with our customer's technical staff. You will work closely together with the Partners, responsible for the opportunity if required.

Responsibilities: I want to and can do that!

• Demonstrate Splunk products and services to customers on site, remotely via webinar sessions, and at field events such as conferences and trade shows
• Willing to travel to visit partners, prospects and customers, and to engage in onsite customer and partner work when required
• Experience responding to functional and technical elements of RFIs/RFPs is also relevant.
• High-reaching with a proven record in technical software/hardware sales and knowledge of technology
• Strong presentation skills and able to communicate clearly and expertly
• Ability to be organized and analytical, and eliminate sales obstacles using creative and adaptive approaches
• You should be comfortable working for a multifaceted technical organization with a fast-growing partner and customer base

Requirements: I’ve already done that or have that!

• At least 5 years of proven experience in selling and supporting software products to IT organizations
• Experience in delivering sales and technical enablement workshop or webinar to customers
• Proficient in either IT Security or DevOps solutions.
• Experience and familiarity with IT management products and services.
• Experience with networking, server, application and development technologies
• Domain expertise with IT Operations, Application Management and/or security/compliance is desirable.
• Indonesia Bahasa speaker

Job Description:

• Involvement in Production testing scope.

• Operates and maintains simple test equipment appropriately to measure and perform RF PCBA & module tuning and testing

• Perform duties with minimal supervision

• Integrates continuous improvement concepts and techniques into work

• Performs other duties as assigned

• Set up and run HASS to qualify the modules under testing conditions.

• Conduct a Functional Acceptance Test to complete the module test process.

• Maintaining the operations of the ATE stations

• To generate test reports

• Integrates continuous improvement concepts and techniques into work

• Performs other duties as assigned

Job Requirement:

• Education background : ITE or Diploma in Electronics / Communication Engineering or related studies

• On the job training will be provided.

• Prior experience working in electronics (modules) production / manufacturing environment

• Competent handling of miniature with tweezers

• Ability to handle and solder components using a microscope

• Ability to produce consistent quality workmanship on repetitive manual processes

• Work Location: Ang Mo Kio

Knowledge, Skills, Competencies

• Able to understand mechanical and electrical wiring diagram with some basic understanding of cable termination.

• Experience with network design and networking exposure will be added advantage

• Good knowledge with Operating platform such as Microsoft Windows and Linux

• Proficiency in operating measuring equipment or software such as network analyser, serial protocol analyser and oscilloscope

Element has an opportunity for an Engineer to join our rapidly expanding team in Singapore

In this role , you will perform variety of routine and non-routine testing assignments within civil testing operations and esure timely and accurate test results under minimal direct supervision

This role is based in Sungei Kadut Loop , Singapore.

Job Duties:

• Be accountable for accurate and timely release of testing data to customers and oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide input and support on business development opportunities with new or existing customers
• Provide formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assist in the professional development of novice technicians and engineers within the local laboratory and utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelors of Science degree in a science or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

• Assist, manage and review Project Management Plan to monitor all aspects of project including progress, cost management (i.e. Claims & VO verification and procurement negotiation), quality, safety, human resource, environmental and etc.
• Assist Project Director and Project Manager in conceptualizing and executing project schedule, cost, procurement and quality management of project.
• Assist, manage and review project management tool and produce reports to monitor progress of project and identify project critical path.
• Assist in tracking of Architectural Instructions issued and counter propose if necessary.
• Tracks, Interpret and Solve any Drawings discrepancies (RFI) between all Trades.
• Management of project staffs and assists them in fulfilling their potential and beyond.
• Monitoring and ensuring sub-contractors of different trades are able to proceed with their works on site.
• Checking and monitoring wastage of materials on site to ensure no unnecessary wastage of materials.
• Assist PM to chair various committee meetings such as weekly sub-contractors’ coordination meeting, safety committee meeting and etc.
• Leads Weekly Technical Meetings with consultants and client representatives to resolve issues between Architectural, Structural and M&E trades
• Together with PM prepares and presents Biweekly Project Schedule Meeting to Client representatives, consultants and Client QS
• Independently ownership, coordinate & monitor of all ERSS works and relating submissions and requirements between designer and on-site implementation up to dismantling.
• To liaise and coordinate with professional designer for all temporary shoring works and permanent structure works.
• Liaise with clients, consultants, government authorities and sub-contractors to ensure work progression is on schedule and project milestones / deliverables completed according to shareholders’ expectation.
• Hands-on site day-to-day coordination on architectural, structural, M&E, interior design and fit out works, inclusive resolving all RFI
• Acts as liaison between surrounding neighbourhoods (all nearby properties / owners)
• Preparation of official letters to sub-contractors, consultants and client.
• Carry-out structural inspection with RTO/RE
• Other ad-hoc activities as when required by the company.

Responsible for maintenance/trouble shooting of plant equipment (mechanical and electrical systems) at water treatment and waste water treatent plants.

Prepare technical reports and submission to the clients.

Purchasing of materials as required.

Good technical knowledge and codes of safe work practice.

Maintain good housekeeping.

Minimum Diploma qualification.

Must possess WSQ certificates (BCSS, Confned Space Supervisor/Assessor, WAH)

Driving Licence Class 3 preferred.

5 years relevant working experience at Public Utilities Board (PUB) waterworks and water reclamation plants.

• Responsible for all major mechanical and electrical and instrumentation equipment
• Lead a team of technical executives/technicians for troubleshooting works
• Manage the purchase of major supply and repair items alongside with supervision and execution of preventive and condition monitoring of major electrical equipment
• Handle hands-on preventive maintenance and breakdown maintenance work
• Coordination with clients and subcontractors to meet the site/project requirements
• Carry out rectification of faults within a specified time
• In-charge of troubleshooting of M&E system
• Responsible for planning, execution and supervision of all facilities management and operational activities
• Responsible for project cost control and service standards
• Any other ad hoc duties assigned

Job Requirements

• Degree or Diploma in Engineering.
• 3-5 years of relevant working experience
• Technical knowledge of M&E systems(including, but not limited to, fire protection systems, AV systems and ACMV systems) is an added advantage
• Able to perform shift work if required
• Preventive Maintenance Troubleshooting

Project Engineer

Working Days: 5.5days

Working Timing: Mon to Fri 8:30am to 5:30pm & Sat 8:30sm to 12:30pm

Working Location: Woodlands / Site Office

Salary: $3,000 to $6,000 depending on experience

Requirements

Candidate must possess at least a Diploma, Advanced/ Higher/ Graduate Diploma or Degree in Mechanical, Electrical Engineering

Experience in chiller system

Responsibilities & Duties

Knowledge of M&E project requirements and contract requirements

Able to manage projects/ claims/ sub-contracts

To able to work odd hours (if necessary)

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Company’s Profile

Our Client company is a prominent engineering company based in Singapore, specializing in HVAC (heating, ventilation, and air conditioning) systems, as well as other building services. The company is known for its commitment to sustainability and energy efficiency, providing innovative solutions for both commercial and residential projects.

Salary Package:
Basic Salary: $4200 - $5000

Working Location: Ang Mo Kio / Yio Chu Kang / Central

Working Hours: Mon - Fri 8.30am - 5:30pm

Key Responsibilities:

· Assist in managing the electrical team.

· Perform design, calculations, planning, and tender preparation.

· Support team development and review QA/QC documentation.

· Collaborate with clients, project managers, architects, and contractors.

· Troubleshoot technical issues during design and construction.

· Contribute ideas for improving efficiency and revenue.

· Assist with testing and commissioning of ACMV electrical systems.

· Ensure compliance with electrical codes and standards.

Requirements:

· Any qualification in a relevant engineering field with minimum 1 year of related working experience in the Construction Electrical Field associated with ACMV / Electrical.

· Engineering design of commercial buildings, major infrastructure transportation projects and mixed-use developments

· Possess design experience and good understanding of ACMV / Electrical technical systems and procedures:

· Possess knowledge on all cabling, loading and sizing calculations and equipment selections such as cable, generators, panels, etc.

· Develop, design through establishing, design briefs, design reports, calculations, schematics, schedules, specifications, concept, Preliminary, Detailed and Construction Engineering Designs

· Productions of drawings and developing models

· Site Experience, Testing & Commissioning Experience

· Having experience working with Infrastructure Projects would be an added advantage.

Candidates without experience are welcomed to apply! On job training will be provided!

*Able to start work within short notice will be highly advantageous.*
**Please be notified that only shortlisted candidates will be notified**

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: TOH SHIQI

EA Personnel No: R23119083

EA License No: 21C0845

about the company

Our client is a leading global leader of semiconductor solutions. They have operations globally across Taiwan, Europe, China, Korea etc. and they’re now on a look out for a Senior/Design Engineer to join their dynamic team during an exciting time in their development.

What you will be here for

• Design and develop semiconductor equipment
• Participate in design review by providing mechanical design inputs relating to DFM and DFA
• Develop, test and document designs for transport mechanisms, vacuum systems, and various process stations
• Prepare and release 3D solid Models and Engineering drawing
• Devise the initial concept of the assigned device, component or system and participate in the overall detailed product design

What you will need

• Degree in Mechanical or Mechatronics Engineering
• Min 6 years of experience in machine / semiconductor equipment design
• Must process knowledge and experience in the design of automation or semiconductor equipment
• Must process good knowledge for 3D CAD software
• Knowledge of ECO release of Manufacturing quality documentation
• Experience in dynamic electromechanical system design
• Equipment troubleshooting experience will be a plus

If you are interested in the position , kindly send your CVs to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913