Total 292 manufacturing engineer job vacancies in Engineering category in d26 upper thomson springleaf

Work Schedule: Mon - Fri, 9am - 6pm

Location: Woodlands & Tampines

Duration: Tentatively 1 year & Renewable

Salary Structure: Basic + AWS

Responsibilities:

HSE Policy Development and Implementation

• Develop, implement, and maintain Health, Safety, and Environmental (HSE) policies and procedures in compliance with local regulations and industry standards.
• Ensure alignment with company policies and international best practices, specifically for the electronic gases industry.

Risk Assessment and Hazard Control

• Conduct comprehensive risk assessments to identify potential hazards and develop strategies for mitigation.
• Oversee the safe handling, storage, and transportation of hazardous substances in line with industry regulations.
• Perform regular site inspections and audits to ensure adherence to safety protocols and address non-compliance issues promptly.

Regulatory Compliance

• Ensure compliance with local government standards and requirements for hazardous substances and safety practices.
• Prepare and maintain documentation for regulatory reporting and ensure the workforce is aligned with legal requirements.

Incident Management

• Investigate workplace incidents, near-misses, and accidents, focusing on root cause analysis.
• Provide detailed reports and recommendations to prevent recurrence and improve workplace safety.

Training and Certification

• Conduct HSE training sessions for employees, contractors, and vendors with a focus on hazardous substances and emergency response.
• Ensure the workforce meets the safety competency levels required for working in the electronic gases industry.

Emergency Preparedness and Response

• Develop and implement emergency response plans, particularly for handling hazardous substances and chemical incidents.
• Organize regular drills to test readiness and update protocols based on feedback and evaluations.

Performance Monitoring and Continuous Improvement

• Monitor HSE performance metrics, such as compliance rates and incident statistics, to identify areas of improvement.
• Collaborate with project managers to implement proactive safety measures and foster a culture of safety excellence.

Qualifications and Skills:

• Mandatory Certification: Certificate in Safety, Health, and Environmental (SHE).
• Preferred Certification: Certificate in Manage Hazardous Substances or other relevant safety certifications.
• Over 8 years of experience in safety management, preferably in the electronic gases, Chemical or related industries.
• Strong understanding of HSE management systems and local government standards, with specific expertise in managing hazardous substances.
• Diploma or higher education in a relevant field, with proficiency in written and spoken English.
• Skilled in Office software (Word, Excel, and PowerPoint).
• Clear thinking, excellent communication skills, and strong organizational abilities.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to [email protected] or please click on “Apply Now” and provide the below details in your resume.

1. Reasons for leaving ALL your employment
2. Current and/or last drawn monthly salary (please provide breakdown)
3. Expected monthly salary
4. Availability

We regret only shortlisted candidates will be notified.

Important Note: Career International - FOS Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA). Please read our privacy statement on our corporate website https://en.careerintlinc.com/

Career International - FOS Pte Ltd

EA License No: 14C6926

EA Personnel: Foong Mei Qi

EA Personnel Reg No: R22106936

Job Description:

• Report to the Senior Project Manager/Project Director
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation, and execution of works on-site
• Coordination, supervision & monitoring of the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor and suppliers on all project implementation issues and attend site meetings when required
• Coordinate all submissions
• Produce weekly site progress reports and necessary submissions
• Attend meetings, and conduct site inspections on work progress to ensure quality control by authority requirements.

Job Requirement：

• Degree in Engineering or equivalent
• At least 3 Years of working experience in the related field is required for this position
• Experience in reinforced concrete building and architectural design is an advantage
• Able to work well under pressure
• Independent with good communication skills
• Good organizational and planning skills
• Effective communication, coordination skills, and teamwork
• Able to work 6 working days
• Able to work overtime/shift rotation

Job Description:

• Corporate with the constrcution manager to connect with various government acceptance departments.
• Corporate with the constrcution manager to supervise and manage the site to meet the various goals of the project.
• Corporate closely with subcontractors to monitor the progress of small towns and coordinate the work resources required by subcontractors to meet project requirements.
• Corporate with goverment personnel to conduct on-site inspections.
• Participate in weekly or monthly meetings with subcontractors to discuss work progress and corperate in preparing monthly meeting progress reports.
• Establish good relationships with all relevant parties.
• Corporate to ensure site safety and comply with the requirements of the authorities.
• Corporate to organize relevant physical and electronic documents on site engineer, etc.
• Other tasks assigned by the manager.

Requirements & Qualifications:

• Diploma / Degree or above preferably from a recognized University accredited with PEB, Singapore
• Experience with public residential projects would be advantages
• Proficient in Microsoft Office / Projects, AutoCAD
• Ability to keep a positive attitube in a fast-paced environment
• Good team player

Mission:

As part of our continued growth, we are recruiting candidates for the role of Implementation Engineer to strengthen our team and contribute to international projects. The Implementation Engineer will play a key role in configuring PowerCARD application and developing customized solution for our clients. The primary responsibilities will include:

Key Responsibilities:

• Participate in studies, gap analysis, and technical design to identify specific configuration and development needs.
• Present standard interfaces and prepare technical specifications for interfaces and mapping.
• Work with the client to ensure their specifications are met and develop custom software as required.
• Prepare Technical Specification Forms (TSFs) based on Business Solution Descriptions (BSD) for specific functionalities.
• Develop customer-specific solutions based on TSFs and conduct unit testing.
• Correct bugs reported by the test team.
• Assist in configuring and integrating various modules of the solution to meet the customer’s needs.
• Participate in the installation of project deliverables at the client’s site.
• Assist the client with integration and acceptance testing, ensuring smooth implementation.
• Diagnose and resolve bugs reported by customers to ensure the expected functionality.

Certification, Acceptance, and Go-live Phases:

• Guarantee certifications with international networks (Visa, Mastercard) to approve and certify the solution and interfaces.
• Assist the client during the acceptance testing phase and implement pilot programs to test the production environment.
• Prepare and deliver patches and ensure the smooth transition of the project to the production phase, including handing over to the HPS support team.

Reporting and Performance Tracking:

• Report incidents and anomalies to impacted teams.
• Maintain daily activity reports on HPS tools to contribute to performance monitoring and optimization.

Qualifications:

• Bachelor’s degree in Computer Sciencec, Engineering, or a related field.
• At least 3 years of professional experience in a similar role.

Must-Have Skills:

• JAVA 17
• Angular
• Spring Boot
• Kubernetes
• Knowledge of DevOps tools such as JIRA, Bitbucket, and Jenkins

Nice-to-Have Skills:

• C
• Gradle
• Liquibase
• gRPC & Protobuf
• Spock
• Helm
• Terraform
• Kafka
• Elasticsearch
• AWS

Additional Skills & Knowledge:

• Strong knowledge of testing techniques
• Proficiency with Oracle databases
• Familiarity with HP-UX, LINUX, Unix AIX, and Solaris
• Knowledge of PL/SQL, C, Pro*C, JavaScript, and Shell scripting

This is an exciting opportunity to be part of a dynamic team working on cutting-edge technology and international projects. If you meet the required qualifications and are passionate about implementing innovative solutions, we encourage you to apply

Lasertec Corporation provides various inspection and measurement solutions based on its expertise in applied optical technologies. Guided by the corporate philosophy of “Inventing for your success, inventing for the future”, our specialisation is in semiconductor-related inspection systems, and we strive to achieve further growth in the semiconductor industry where innovations keep driving market growth, by developing perfectly fit products to meet customer needs ahead of others.

As a subsidiary, Lasertec Singapore supports our customers’ needs with maintenance service for the mask inspection machines.

We are currently seeking an Asst. Engineer to join our team.

In this role, your responsibilities are to:

• Provide technical support to customers either on-site or remotely.
• Troubleshoot and repair machines at customer site.
• Install new test machines and software upgrades.
• Work on projects such as creating manuals/SOPs etc.

This role requires you to have:

• A Diploma/Degree in Electronics or Mechatronics or related qualifications.
• Intermediate proficiency in Microsoft Office Excel, Words.
• Work experience in a customer support environment.
• Work experience in a semiconductor industry for more than 1 year.
• Knowledge in laser, oscilloscope, spectrum analyzer, other instruments.
• Proficiency in Japanese, both written and spoken, to communicate effectively with counterparts in Japan during weekly meetings, training sessions or troubleshooting instances.

We are looking for someone who is

• A team player.
• Has strong interpersonal skills with good oral and written communication skills.
• Able to travel overseas frequently and on short notice.
• Flexible to work overtime or on selected weekends and public holidays, if required.
• Self-driven in pursuing technical knowledge needed for the job.

We look forward to receiving your application.

For more information about Lasertec Group, please visit https://www.lasertec.co.jp/en/.

Job Responsibilities :

• Liaise with client and develop design concepts and basis of design to set direction of design.
• Check engineering deliverables and assure technical integrity of design.
• Ensure all engineering works comply with all relevant Statutory standards, Regulations and Codes of Practices.
• Carry out various types of geotechnical design and analysis – deep excavations, shafts, tunnels, slopes, foundations, etc.
• Carry out appropriate design of structural nature where required.
• Highlight technical issues and update Construction Department on changes and distribute to vendors, engineers and supervisors.
• Plan and execute geotechnical and instrumentation installation and monitoring works.
• Site evalution of soil, rock, fault distribution and geological studies on site to determine their engineering properties.
• Performs other duties or projects as assigned.

Job Requirements:

• Minimum a Diploma, Degree in Civil Engineering, Geology or its equivalent.
• Preferably with a minimum of 2 years of relevant working experiences in construction industry.
• Proficient in Microsoft Office, AutoCAD and Geotechnical analysis software.
• Able to communicate effectively with Client, Consultants, Management and Subcontractors.
• Location: East

• Experienced in the design of water treatment plants (desalination, potable water, recycle water), wastewater treatment plants (municipal and industrial) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S, Piping & Systems/Skids Engineering and Drafting) on development of engineering deliverable on a timely basis.

• Reviewing and providing input to project schedule and ensure all planned dates and progress are realistic. Provide updates on engineering deliverables per schedules and implement catch-up actions where applicable.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

• Assist the Engineering Manager on the development of FAT, SAT, Pre-Commissioning, Start-up, Commissioning protocol and support the implementation.

• Development of Operational & Maintenance Manual.

• Assist the Engineering Manager to support project management team in project implementation related engineering, troubleshooting and maintenance requirement.

We are looking for a candidate passionate about reducing carbon emissions in the built environment through intelligent energy management. We do this via the ENX™ Sustainability AI for the built environment, enabling the integration of IoT sensors and intelligent controls in order to:

• Perform Energy Monitoring
• Optimise ACMV, Lighting and Plug Loads
• Manage Air Quality, Occupancy, Water Quality
• Monitor Data Centre Infrastructure
• Report Sustainability KPIs in real-time

Featuring a modular system architecture, the ENX™ Sustainability AI can be deployed as a cloud-based Building Management System (BMS) for new build projects, or as an Energy Management System (EMS) for offices and warehouses that can integrate seamlessly with existing BMS infrastructure. Our customers have reduced energy consumption by up to 40%.

Responsibilities

• Field Deployment: Interpret detailed drawings, Bill of Materials (BOM) and Scope of Works (SOW) issued by Design Engineering team. Plan, coordinate and implement projects at client jobsites, including site assessments, subcontractor management, as well as configuration and installation of our devices and sensors. Document project progress, findings and recommendations for continuous improvement. Provide technical training to clients and end-users on the operation and maintenance of our systems.
• Data Analysis & Field Technical Support: Analyse and interpret data collected from various equipment, devices and sensors, including Building Management Systems, electrical meters, BTU meters, IAQ Sensors and various PLCs. Provide technical support and maintenance services for projects at client premises. Coordinate with Helpdesk to troubleshoot and resolve site issues.

Job Requirements

• Degree or higher in Building, Civil/Mechanical/Electrical/Computer Engineering, Computer Science, Electronics or equivalent.
• At least 5 years of Engineering/IT experience, preferably in Building Services or Industrial Automation with good knowledge of automation, PLCs, SCADA, Building Management Systems, M&E systems, RTU devices and networking equipment.
• Good interpersonal and communication skills, passionate about technology, capable of working independently, and highly organized with strong attention to detail.
• Willing to travel to client jobsites within Singapore and Johor Malaysia.

Design & Drafting: Assist in creating and refining electrical drawings, ensuring they align with project specifications and industry standards.

Calculations: Perform basic load calculations and other engineering analyses required for project development.

Material Management: Generate material take-offs to aid in accurate project planning and cost management.

Project Execution: Support the timely execution of deliverables by coordinating project schedules, resources, and deliverables.

Coordination & Support: Assist in the arrangement of equipment installation, testing, and commissioning activities, ensuring smooth project completion.

Problem-Solving: Collaborate with the manager to address client inquiries and provide effective solutions for electrical issues.

Stakeholder Communication: Maintain consistent communication with clients, vendors, contractors, and sub-contractors to ensure project alignment and success.

Client Relations: Build and nurture strong relationships with customers and clients to foster trust and satisfaction.

Personal Attributes:

• Detail-oriented with a proactive problem-solving attitude.
• Excellent team player with the ability to work independently when required.

Training & Development:

• Specialized training in PLC programming to enhance your skills and career trajectory.
• Opportunities for professional development and certifications.

Additional Perks: Comprehensive support for career growth within a supportive team environment

Job Description:

• Responsible for on-site technical and engineering matters.
• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Site inspection & upkeep site record.
• Liaise with consultants, client etc.
• Other duties assigned by Site Manager / PM.

Requirements & Qualifications:

• Graduate Bachelor in Engineering (Civil) or equivalent.
• 3-5 years work experience in Building Construction.
• Able to work independently.
• Autodesk Revit MEP experience will be an advantage

Roles & Responsibilities

The Site Engineer (Building) is responsible for assisting on the progress of site works and manpower related aspects of the project.

The responsibilities of this position are, and not limited to, as follows:

• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Coordinate between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Qualifications and Education Requirements

• Education: Degree in Civil Engineering or equivalent
• Experience: Prior 3 years experience in building projects

Responsibilities:
* Design, implement, and maintain robust CI/CD pipelines for efficient software delivery.
* Collaborate with development, testing, and operations teams to automate build, deployment, and testing processes.
* Configure and integrate various tools and technologies to support automation and streamline the CI/CD pipeline.
* Develop automated test scripts and frameworks for functional, regression, and performance testing.
* Execute automated tests and analyze results to identify defects and areas for improvement.
* Monitor CI/CD pipeline performance and reliability, troubleshooting issues as needed.
* Continuously optimize and enhance the CI/CD pipeline for improved efficiency, scalability, and reliability.
* Work closely with cross-functional teams to ensure alignment with project requirements and timelines.
* Provide technical guidance and support to team members on automation testing and CI/CD best practices.
* Stay updated on emerging technologies, tools, and trends in automation testing and CI/CD DevOps practices.

Requirements:
* Bachelor’s degree in computer science, Engineering, or related field.
* Proven experience (Minimum 3 years) in building and maintaining CI/CD pipelines.
* Strong proficiency in CI/CD tools such as Jenkins, GitLab CI.
* Proficiency in scripting languages such as Python, Shell, or Groovy for automation tasks.
* Experience with containerization technologies like Docker and orchestration tools like Kubernetes.
* Hands-on experience with configuration management tools such as Ansible, Puppet, or Chef.
* Solid understanding of software testing concepts and methodologies.
* Experience in developing and executing automated test scripts using tools like Selenium, or JMeter.
* Familiarity with version control systems (e.g., Git) and code branching strategies.
* Strong problem-solving skills and attention to detail.
* Excellent communication and collaboration abilities.
* Proven ability to work effectively in a fast-paced, dynamic environment.
Preferred Qualifications:
* Certification in DevOps or Automation Testing.
* Experience with cloud platforms like AWS, Azure, or Google Cloud Platform.
* Knowledge of infrastructure as code (IaC) principles and tools such as Terraform or CloudFormation.
* Familiarity with Agile/Scrum methodologies.

Working with high and low voltage equipment; and managing power generation, transmission and distribution

Developing electrical equipment and power distribution equipment specifications, as well as preparing electrical load calculations for single and three phase loads

Utilizing experience with power system analysis tool to prepare electrical single line drawings, schematics and detail drawings as required

Managing and maintaining building services, such as lighting, heating, ventilation and lift systems; and working with renewal energy sources

Overseeing maintenance, testing and repair of company-owned electrical equipment; and reporting issues on time to the managing authorities

Drawing up project plans, making models, prototypes and circuit diagrams for high and low voltage electrical equipment; and carrying out feasibility studies for new technical developments.

Good MS Word and Excel proficiency, as well as good verbal and written communication skills

Interpersonal and leadership skills; and ability to work well alone and in a team.

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Roles & Responsibilities

Job Description:

• Handle project planning, scheduling, monitoring and updating to meet project completion targets
• Perform site planning, coordination and inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met
• Liaise with the BIM team to update the drawings or BIM Model with the latest information available timely
• Prepare as-built drawings or BIM Model and compile O&M Manual for submission
• To assist in project coordination and oversee of all Civil and Structural works on site and ensure all related activities are carried out as per drawings
• Review architectural & structural submission documents & submission drawings prior relevant authorities' submission
• Assist the Project team in site walk-down survey with other discipline engineers and Client representatives as required, in resolving technical issues until construction completion
• Liaise with internal and external parties for project management
• Any ad-hoc duties as assigned

Job Requirements:

• Minimum of 2 years’ experience
• Recognized Degree in Civil Engineering, Project Management, Structural Engineering or equivalent approved by PEB, BOA or SISV
• Good knowledge of technical design and engineering, construction methodology and construction planning
• Good oral, written and inter-personal communications skills in dealing with individuals and groups at all levels
• Proficient in Microsoft Office, AutoCAD and knowledge of BIM
• Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment
• Obtain CONQUAS supervisor certificate will be added advantage

Join the Team at McConnell Dowell Are you passionate about engineering and civil infrastructure? At McConnell Dowell, we deliver landmark projects that shape communities and drive progress.

We're seeking Project Engineers and Site Engineers to join our team in Singapore and contribute to our civil infrastructure works projects.

About the Role

As a Project Engineer or Site Engineer, you'll play a pivotal role in ensuring the successful execution of our projects. Your responsibilities will include:

• Overseeing engineering, planning, quality, cost control, and scheduling functions.
• Adhering to the McConnell Dowell Project Execution Plan and safety/environmental responsibilities.
• Assisting senior engineers and the construction manager in daily site activities.
• Monitoring and reporting on site progress, including direct employee and subcontractor works.
• Developing procedures for construction activities and ensuring compliance with relevant legislation.
• Representing McConnell Dowell professionally in interactions with clients and stakeholders.
• Promoting McConnell Dowell’s core values and fostering a strong safety culture.

What We’re Looking For

To excel in this role, you should have:

• A degree in Civil or Structural Engineering. 3 to 5 years of relevant on-site civil construction experience.
• Preferably, local experience and knowledge of civil infrastructure projects in Singapore.
• Strong interpersonal and communication skills.
• The ability to work on an alternate 6-day workweek schedule.

Why Join McConnell Dowell? Be part of a dynamic team working on major civil infrastructure projects. Gain valuable experience with a globally recognized infrastructure company. Contribute to innovative and impactful engineering solutions.

How to Apply If you're ready to take your engineering career to the next level, we want to hear from you! Submit your application today and join McConnell Dowell in building a better future.

We require an experienced Engineer for our ACMV division.

Job Scope

1)Project Planning and Project execution including documentation and budgeting for Service,Repair and Installation Costing

2) Installation/ Service and Repair on the following brand and systems

1. GUNTNER
2. SABROE
3. MUNTERS
4. EVAPCO

3) Material procurement for project

4) Liaise with clients on projects

5) Complete vendor evaluation

6) Supervise at site for installation and safety compliance

6) Testing and commission for ACMV systems

Job Requirements

1) Degree in Engineering or Equivalent

2) At least 8 years of work experience in projects wit focus on ACMV

3) Speaks English well to communicate to clients

4) Proficient in Microsoft Word, Excel

5) Experience in Projects for ACMV

Section A: Objectives/Purpose of the Job

The successful candidate will support the execution of planned changes at our Singapore sites, focusing on hardware replacements, troubleshooting, and installations. This role is vital for ensuring smooth operations and minimizing downtime during change implementations.

Section B: Key Responsibilities & Key Result Areas

• Network Equipment Familiarity: Understand and work with network devices and their components, including fibre and copper cables.
• Support Planned Activities: Participate in early morning green zone activities (between 11pm and 6am) two to three times weekly within Singapore, as required.
• On-site Hardware Support: Execute hardware changes, including the physical replacement and installation of network devices, plugin of USB media, organize the fibre/copper cables in preparation for planned activities and other equipment as per change requests.
• Troubleshooting: Diagnose and resolve issues encountered during change implementation with existing hardware and consoles, ensuring minimal disruption to operations.
• Console Setup: Provide console connection as needed during planned activities.
• Communications: Liaise and coordinate with implementation engineers, internal stake holders , providers and partners to ensure swift and efficient resolution of faults
• Continuous Improvement: Identify areas of improvements to reduce Infrastructure faults and improve monitoring capability.

Working Hours:

• Regular Hours: 8:30am-6pm SGT in Singapore Office, if no on-site activity
• Early morning green zone activities: twice or thrice weekly, between 11pm to 6am

Additional Information:

• Travel: travel within Singapore required
• Physical Demands: Ability to lift and move equipment as necessary, and perform tasks in various physical environments.

Section C: Qualifications & Experience

Must have

Good to have

Qualifications

A good Diploma in Electrical / Electronic / Computer Engineering / Computer Science / Information Systems from a recognized institution

Candidates with 2 years of relevant experience and knowledge in network devices and transport can be considered if there is no diploma.

Experience

1 – 2 years of hands-on experience on network devices

Technical / Professional Skills

• Knowledge of routers/switches architecture and analytical trouble-shooting skills in the area of technical fault isolation and rectification.
• Working experience and strong understanding of Juniper devices and its parts will be an added advantage

Non-Technical / Soft Skills

• Possess good interpersonal and communication skills.
• Possess basic knowledge of office applications skills e.g. Excel, Visio, Word.
• Self-starter and highly driven with the ability to work independently, as well as in a team.

BlueSG is the first and only point to point car sharing service in Singapore, offering a convenient, flexible and affordable mobility option to all, complementing public transport while reducing the need for car ownership. With a 100% electric fleet, BlueSG provides a sustainable transportation solution, eliminating direct carbon dioxide emissions as compared to traditional vehicles.

Join us if you’re passionate about our business, ready to contribute, and resonate with our core values – Collaboration, Curiosity, Customer-Centricity, Empowerment and Respect!

About the Role

As a Fullstack Engineer, you will develop, maintain, and support a complex modern web application (Angular/React/Nest.JS). You will gain experience in the latest concepts, technologies, and modern frameworks such as Typescript, Docker, AWS.

· Work on multiple software engineering projects, both frontend and backend.

· Provide guidance and technical expertise for architecture, and technical decisions on building web applications.

· Raise and document non-functional requirements.

· Unblock the team when complex technical issues arise, using pair programming, conducting RCAs, and getting deep into the codebase.

· Review design, code and write tests to ensure high quality.

· Coach and mentor individuals to grow within the company and improve in both productivity and quality.

· Collaborate within the Engineering team to align technical solutions.

· Collaborate with the Product team to execute the roadmap and ensure a great user experience.

· Identify and escalate potential risks to stakeholders while proposing solutions to address them.

· Perform hands-on coding.

What We’re Looking For

· Bachelor’s degree in Computer Science or the equivalent.

· 4+ years of experience in fullstack engineering.

· 2+ years of hands-on coding experience using Typescript.

· 2+ years working on modern frontend stack (e.g. React, Angular, View).

· Proven expertise in building APIs (e.g. Rest, GraphQL) and complex UI/UX with real-time data and complex state management.

· Proven expertise with Git, Unit Tests and Integration tests.

· Experience with SQL and DB schema.

· Experience with CI/CD pipeline (setup / configuration), Docker and AWS (ECS, SQS, RDS).

· Experience in designing architecture for web application.

· Hands-on experience with agile methodologies (such as SCRUM, TDD, BDD).

· Good knowledge of best practices, software engineering patterns and how to apply them.

Responsibilities:

1. Assist mechanical and electrical engineers for system assembly, installation, commissioning, and troubleshooting.

2. Carry work assembly and installation according to design requirements, schematics, drawings or working instructions.

3. Undertake ad-hoc responsibilities assigned.

Knowledge, skills and experience:

1. NITEC/Diploma in Mechatronics/Mechanical/Electrical/Electronic engineering.

2. Knowledge on mechanical and electrical principles.

3. Able to comprehend electrical and electronic schematics and mechanical drawings.

4. Hands-on experience is a must, e.g. soldering, wiring, M&E assemblies, panel wiring, grinding, drilling.

5. Able to work with minimal supervision.

Expectations:

1. Team player

2. Attention to details

3. Strong in analytical thinking and problem-solving skills

4. Be responsible and self-disciplined

5. Assure quality and accuracy of work

6. Maintain tidiness, cleanliness and safety of co-working workspaces

Job Description

• 5 years relevant working experience in Water Treatment industries is preferable.

• Experienced in the design of water treatment plants (desalination, potable water, demineralization) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.), experience in Demineralization System will be added advantage.

• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/EDI), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager & Lead Engineer, Process on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S and Drafting) on development of engineering deliverable on a timely basis.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

Requirement:

• Degree in Chemical Engineering or Environmental.

• Prior experience of at least 5 years in process design. Experience in UltraPure Water (UPW) will be added advantage.

• Ability to establish and maintain appropriate relationships with team members.

• Able to work independently with minimal supervision

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 8 years of civil engineering experience
• 3 years of experience in Major Construction work and shall possess supervision experience in large span project (e.g auditorium or roof structures with span more than 40m span)
• Degree in Civil Engineering recognized by PEB
• Accredited as a RE with IES
• Able to perform shift work.

Work Schedule: Mon - Fri, 9am - 6pm

Location: Woodlands & Tampines

Duration: Tentatively 1 year & Renewable

Salary Structure: Basic + AWS

Project: Air Filtration

Responsibilities:

Electrical Design and Review

• Interpret and analyze Chinese and English electrical drawings for project execution. Ensure electrical designs comply with project specifications, industry standards, and local regulations.
• Coordinate with design teams to provide input on electrical systems and address discrepancies.

Construction Management

• Oversee electrical installation and ensure adherence to project schedules, quality standards, and safety protocols.
• Conduct on-site supervision of electrical construction, including cable routing, equipment installation, and system commissioning.
• Monitor contractors and vendors to ensure proper execution of electrical work.

Testing and Commissioning

• Lead the testing and commissioning of electrical systems for the air filtration project.
• Verify system performance and functionality, troubleshooting issues as needed.
• Prepare detailed reports on testing results and recommend corrective actions.

Compliance and Standards

• Ensure all electrical work complies with Singapore’s regulations and standards, including workplace safety requirements.
• Conduct regular inspections and audits to ensure compliance and identify areas for improvement.

Coordination and Communication

• Collaborate with cross-functional teams, including mechanical engineers, project managers, and external contractors, to ensure seamless project execution.
• Act as a liaison between the project team and clients to address electrical-related concerns.
• Participate in regular project meetings and provide updates on electrical work progress.

Documentation and Reporting

• Prepare and maintain detailed documentation, including progress reports, commissioning records, and compliance checklists.
• Generate project status reports and submit them to senior management and clients.

Resource Management

• Coordinate material procurement and inventory management for electrical components.
• Ensure optimal utilization of resources to meet project timelines and budgets.

Qualifications and Skills:

• Over 8 years of experience in electrical construction management, installation, and commissioning.
• Prior experience in air separation or chemical industries (experience with electronic gases preferred).
• Proficiency in reading and understanding Chinese and English electrical drawings to liasion with Colleagues and Clients.
• Diploma or higher education in a relevant field (electrical engineering or related disciplines).
• Skilled in Office software (Word, Excel, PowerPoint, etc.).
• Strong communication and coordination skills, with the ability to work effectively in a multidisciplinary team.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to [email protected] or please click on “Apply Now” and provide the below details in your resume.

1. Reasons for leaving ALL your employment
2. Current and/or last drawn monthly salary (please provide breakdown)
3. Expected monthly salary
4. Availability

We regret only shortlisted candidates will be notified.

Important Note: Career International - FOS Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA). Please read our privacy statement on our corporate website https://en.careerintlinc.com/

Career International - FOS Pte Ltd

EA License No: 14C6926

EA Personnel: Foong Mei Qi

EA Personnel Reg No: R22106936

Job Summary:

We are looking for an experienced Infrastructure Engineer. This role requires the candidate to architect and build AWS solutions to achieve business outcomes, while also developing dashboards for cost optimization and compliance to enhance the public cloud experience.

Mandatory Skill Set:

• Degree in Computer science or a related field;
• Minimum 5 to 7 years of IT Infrastructure work experience;
• Minimum 5 years of experience with CloudFormation, specializing in both application deployment and architecture management;
• Strong skills in Python or Java for developing custom automation tools, dashboards, and cloud API integrations;
• Extensive hands-on experience with AWS, deploying and managing infrastructure and services;
• Knowledgeable in containers, Kubernetes, and serverless architectures. Skilled in infrastructure monitoring, log analysis, and incident response automation;
• Must have good communication and writing skills;
• Strong analytical, problem-solving skills.

Desired Skill Set:

• Proficient in using Terraform, and Ansible for infrastructure automation and orchestration.

Responsibilities:

• Design and build automated systems to streamline deployment, monitoring, and operations using infrastructure-as-code and configuration management tools;
• Develop and implement robust CI/CD pipelines in collaboration with development teams to drive automation in testing and releases;
• Responsible for utilizing public cloud APIs and services to create scalable, fault-tolerant automation solutions;
• Research and assess new tools for automating security, infrastructure, and operations;
• Implement automated security monitoring, alerting, and remediation to proactively resolve issues and create proofs of concept and prototypes to showcase automation solution value;
• Collaborate with stakeholders and development teams to design automated solutions that meet complex business requirements and build dashboards displaying key metrics, such as cost optimization and compliance;
• Responsible to stay current on automation trends and best practices to bring innovative solutions to the organization.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.