Total 20,216 procurement engineer job vacancies in Engineering category in Singapore

Job Description:

• Provide onsite client support, assisting with troubleshooting and design, configuration and escalated problem management.
• Technical subject matter expert for Cisco ACI network domain, providing technical leadership and mentorship to the team.
• Analysis of client and technical requirements, specifications development, solution design and development, and consult on testing and deployment processes for staging requirement.
• Manage client’s day 2 network operations in the Cisco ACI network landscape and other network technologies as assigned.
• Mandatory requirement: to succeed in this role, you must have experience in Cisco ACI project implementation or configuration.
• Comfortable with occasional support in outdoor environment (due to data centre/ network equipment location).

Key Requirements:

• At least a CCIE or experienced Technical lead/ Subject Matter Expert who is experienced in enterprise routing and switching, data center network and architecture, and network security
• Proficient in troubleshooting Layer 2 and 3 network issues.
• Experience and proven hands-on installation and support in network devices covered in this contract.
• In-depth understanding of network protocols, architectures, and technologies, including TCP/IP, DNS, DHCP, VLANs, and routing protocol such as BGP, OSPF, EIGRP;
• Experience in Data Centre Network (Routing, switching), Cisco Application Centric Infrastructure (ACI)/Software Defined Network (SDN), Cisco ISE Servers.
• Experience in managing, administration, troubleshooting and maintenance of Nexus Switches and Software Defined Network such as Cisco ACI, DNAC and SD-WAN;
• Proficient in managing, administration, troubleshooting and maintenance of Firewall Systems in high availability mode. Firewall administrator certification such as either Palo Alto Networks Certified Network Security Administrator (PCNSA)or Check Point Certified Security Administrator (CCSA) is recommended.
• Experience in troubleshooting 4G and 5G Customer Premise Equipment (CPE) connectivity issue with telco service provider. Proficient in engagement, analyze and feedback on the service report furnished by service provider on their 4G and 5G cellular performance.
• Experience in managing, administration, troubleshooting and maintenance of load balancers.
• Experience in disaster recovery activation and deactivation exercises;
• Proficient in using sniffer tools to capture the network traffic and analyst the packets;
• Proficient in installing, troubleshooting and maintaining network management software.
• Proficient in configuring and managing network monitoring and management platform, e.g., SolarWinds, ServiceNOW, etc.
• Proficient in creating Ansible Playbooks.

Please send your detailed resume in MS Word format to : [email protected]

Stating your notice period / earliest available commencement date, Current & expected salaries.

Applicants with more relevant years of hands on experience will be considered for senior roles.

Job Vacancy: Piped Services BIM Modeller/Drafter cum Engineer

Roles and Responsibilities:

• Drawing Preparation: Create and maintain accurate 3D and 2D drawings for various projects, including Plumbing and Sanitary systems, Irrigation, Rainwater Harvesting, and Fire Protection.
• Collaboration: Work closely with Project Managers and Project Engineers to produce and deliver timely drawings for project submissions.
• Revision Management: Update and revise drawings based on feedback and comments promptly.
• Coordination: Participate in BIM coordination meetings to perform clash detection and resolve conflicts effectively.
• Detailed Drawings: Produce detailed and construction-ready drawings as required.

Pre-Requisites:

• Experience: Proven experience in the construction industry as a BIM Modeller and AutoCAD Drafter.
• Technical Knowledge: Strong understanding of Water Pipe Systems.
• Communication Skills: Excellent verbal and written communication abilities.
• Work Ethic: Ability to work efficiently under pressure and manage multiple projects simultaneously.
• Attention to Detail: High level of accuracy and attention to detail in all tasks.

Benefits:

• Leave Entitlements: MOM-approved annual and medical leave.
• Flexibility: Partial work-from-home option available.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Service/Sales Engineer
• Working Location: Tuas
• Working Hours: 5 days (Mon 8 am – 5 pm, Tue – Fri 8 am – 6 pm)
• Salary Package: Up to $3,600
• Duration: Permanent

Key Responsibilities

• Attend to customer inquiries and requests for spare parts and services.
• Plan and execute sales action plans to engage and follow up with prospects.
• Assist in preparing proposals, tenders, and quotations.
• Build strong customer relationships and identify business opportunities within the industry.

APPLY NOW!!!

• Diploma or Degree (strong relevant experience required if no diploma).
• Good communication and presentation skills.
• Self-motivated to work.
• Possess Class 3 Driving License and own vehicle (preferred). Transport allowance provided if own vehicle is used.
• At least 1 year of sales experience in the Heavy Industry.
• Proficient in MS Office.
• Knowledge of ERP systems is an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68290 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities:

• Responsible & ensure smooth implementation and monitoring of work at the site
• Gather, check site date, recording and monitoring of site work progress/ productivity
• Prepared technical write-up for tender submission including drawings, methodology and program
• Liaise with design consultant to ensure completion of deliverables
• Prepared document for tender submission
• Liaise with design consultant to ensure completion of deliverables
• Procurement and estimating of trackwork materials
• Assisted in preparing presentation slides for internal management review and tender interview with client.

Requirements:

• Min Diploma / Degree in Civil Engineering or its’ equivalent
• Experience in underground civil works (tunnelling) ,Diaphragm Wall, Bore Piling is a plus
• Experience in LTA/MRT Project is an advantage
• Able to lead and work independently

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description:

• Provide supervision services for all Civil & Structural works to ensure that contractors complies with contract/authorities/agencies' requirement
• Submit Quality Assurance and Control plans to OIC
• Review all drawings and specifications, and highlight any discrepancies, non-workable and/or missing details to OIC/QP(D)/QP(S)
• Review and comment on construction method statements, risk assessments for works, work plan, design for safety (DfS) workshop and SOP proposals
• Evaluate technically any claims submitted by main contractor and submit recommendation to the Superintending Officer
• Provide all relevant endorsement required by client, BCA, other statutory authorities/agencies
• Assist QPD for application of TOP and CSC
• Prepare site supervision plan and supervise all works directed by OIC
• Monitor project progress to ensure timely completion and prepare necessary site progress and status report
• Adhere to regulations and requirements of stakeholders
• liaise with stakeholders' supervision team on any supervision works
• Report any accident/incident/near miss on site immediately to OIC and provide all necessary detailed information

Requirement

• Min 10 years with at least 8 years in major construction works in buildings and deep excavation
• Possess a Civil and Structural Engineering Degree recognized by PEB
• Possess a valid RE Certificate
• Familiar with statutory codes and requirements for site supervision, quality control procedures, safety and health, construction administration and submission of progress report

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Email to: [email protected] (126-002-Software Engineer (Devices))

Responsibilities:

• Design, analyse, and develop devices that are key components of an integrated e-payment fare collection system.
• Investigate and implement new methods and technologies to improve the system.
• Address complex issues that development teams may struggle with.
• Engage actively in the software development lifecycle, employing agile and iterative methodologies.

Qualifications & Requirements:

• Bachelor's degree in Electrical and Electronics Engineering, Computer Science, or a related field.
• Minimum of 5 years of experience in C++ application development on Linux.
• At least 3 years of experience with object-oriented software design and UML modelling.
• Proficient in translating requirements into software design using established methodologies.
• Extensive knowledge of multi-threading, socket programming, and inter-process communication.
• Experience with multi-tier system architecture, with cloud computing multi-tier development as a plus.
• Skilled in AWS ECS and Docker containerization, with a solid grasp of DevOps principles and practices.
• Angular development knowledge is a plus.
• Familiar with Agile or Rational Unified Process (RUP) methodologies.
• Strong analytical and problem-solving abilities with clear technical communication skills.
• Excellent written and verbal communication skills.
• Capable of working independently, self-motivated, and a strong team player.

Responsibilities:

• Design, analyse, and develop devices that are key components of an integrated e-payment fare collection system.
• Investigate and implement new methods and technologies to improve the system.
• Address complex issues that development teams may struggle with.
• Engage actively in the software development lifecycle, employing agile and iterative methodologies.

Qualifications & Requirements:

• Bachelor's degree in Electrical and Electronics Engineering, Computer Science, or a related field.
• Minimum of 5 years of experience in C++ application development on Linux.
• At least 3 years of experience with object-oriented software design and UML modelling.
• Proficient in translating requirements into software design using established methodologies.
• Extensive knowledge of multi-threading, socket programming, and inter-process communication.
• Experience with multi-tier system architecture, with cloud computing multi-tier development as a plus.
• Skilled in AWS ECS and Docker containerization, with a solid grasp of DevOps principles and practices.
• Angular development knowledge is a plus.
• Familiar with Agile or Rational Unified Process (RUP) methodologies.
• Strong analytical and problem-solving abilities with clear technical communication skills.
• Excellent written and verbal communication skills.
• Capable of working independently, self-motivated, and a strong team player.

Email to: [email protected] (126-002-Software Engineer (Devices))

Responsibilities:

• Design, analyse, and develop devices that are key components of an integrated e-payment fare collection system.
• Investigate and implement new methods and technologies to improve the system.
• Address complex issues that development teams may struggle with.
• Engage actively in the software development lifecycle, employing agile and iterative methodologies.

Qualifications & Requirements:

• Bachelor's degree in Electrical and Electronics Engineering, Computer Science, or a related field.
• Minimum of 5 years of experience in C++ application development on Linux.
• At least 3 years of experience with object-oriented software design and UML modelling.
• Proficient in translating requirements into software design using established methodologies.
• Extensive knowledge of multi-threading, socket programming, and inter-process communication.
• Experience with multi-tier system architecture, with cloud computing multi-tier development as a plus.
• Skilled in AWS ECS and Docker containerization, with a solid grasp of DevOps principles and practices.
• Angular development knowledge is a plus.
• Familiar with Agile or Rational Unified Process (RUP) methodologies.
• Strong analytical and problem-solving abilities with clear technical communication skills.
• Excellent written and verbal communication skills.
• Capable of working independently, self-motivated, and a strong team player.

Responsibilities:

• Plan and schedule work in accordance to the master and detailed work programme
• Liaise with Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate site activities with subcontractors
• Handle technical and engineering problems
• Provide guidance to supervisors in relation to construction works and ensure work progress according to schedule
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage workers and monitor their work closely to keep site safe and neat
• Supervise ongoing site activities closely

Job Requirements:

• Degree in Civil Engineering recognised by Singapore PE Board
• Registered Resident Engineer with IES/BCA with valid certification in Singapore
• Experience in LTA road projects is preferred
• Experienced as a PE assignee for standing supervision of works
• Ability to communicate well with project principal and subcontractors

Job Overview

Semiconductor devices are the necessity in our modern life. In Aurigin, we are a team of brilliant people designing and manufacturing automated systems in the Semiconductor industry. We are continuing to grow big and fast. We are inviting passionate Hardware (Electrical / Electronics) Engineers to join in this journey with us.

Responsibilities and Duties:

• Design and create system architecture, electrical schematic, wiring diagrams, IO map, PLC code, panel layouts and PCB boards for automation machines
• Create electrical bill of materials (BOM), spare part list, installation instruction manual, maintenance guides
• Perform machine system set up, IO check and trouble-shooting of electrical system
• Perform circuit simulations/analysis, design, development, testing and debugging of circuit board and embedded firmware
• Create PCB board bill of materials (BOM), Gerber file, assembly drawing, schematic drawing, technical design documentation, simulations/analysis report, test report
• PCB prototype board making and debugging
• Manage all electrical material including PCB boards according to machine production assembly schedule
• Perform firmware and PLC code maintenance, bug fixing and enhancement
• Provide technical support, and training on electrical system of automation machine
• Supervise the workmanship of electrical technician and contractors to ensure the build quality of automation machine

Requirements

• Degree in Electrical/Electronic Engineering, Diploma with minimal 2 years experience are welcome
• Good knowledge on electrical Design
• Proficiency in Eplan software
• Able to analyse project requirements, develop electrical schematics, wiring diagrams, and layouts
• Experienced in design to conformity with safety, regulatory standards such as CE, UL, VDE, CSA and SEMI-S2
• Excellent in PCB design with analogue/digital circuit and lighting
• Able to develop circuit board with RS232, RS485, I2C, SPI, USB, Ethernet
• Able to use simulation tools (example: Pspice/ LTspice/ TINA)
• Excellent in Microchip assembly and C/C++ programming languages
• Good programming skill of PLC
• Good soldering skill and electrical wiring harness skills
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Project management skills with the ability to manage priorities, timelines, and resources effectively
• Good in written and spoken English
• Work as a team member in a multi-discipline engineering team

Responsibilities:

• Design, analyse, and develop devices that are key components of an integrated e-payment fare collection system.
• Investigate and implement new methods and technologies to improve the system.
• Address complex issues that development teams may struggle with.
• Engage actively in the software development lifecycle, employing agile and iterative methodologies.

Qualifications & Requirements:

• Bachelor's degree in Electrical and Electronics Engineering, Computer Science, or a related field.
• Minimum of 5 years of experience in C++ application development on Linux.
• At least 3 years of experience with object-oriented software design and UML modelling.
• Proficient in translating requirements into software design using established methodologies.
• Extensive knowledge of multi-threading, socket programming, and inter-process communication.
• Experience with multi-tier system architecture, with cloud computing multi-tier development as a plus.
• Skilled in AWS ECS and Docker containerization, with a solid grasp of DevOps principles and practices.
• Angular development knowledge is a plus.
• Familiar with Agile or Rational Unified Process (RUP) methodologies.
• Strong analytical and problem-solving abilities with clear technical communication skills.
• Excellent written and verbal communication skills.
• Capable of working independently, self-motivated, and a strong team player.

• Basic up to $4000 + AWS
• Working Hours: 5 days
• Company transport provided: Pioneer MRT
• Location: Pioneer

Main Responsibilities:

• Adhere to the project schedule
• Provide technical support to both internal and external customers
• Create and document electrical drawings and circuitry using CREO or SOLIDWORKS
• Compile Bill of Materials and project costs
• Participate in equipment testing and commissioning

Requirements:

• Minimum Diploma in Electrical Engineering or equivalent
• Minimum 2 years of experience in electrical industry
• Knowledge in electrical and electronics system

Interested applicants please send your resume to scott(at)alignrecruitment.com.sg or send to wa.me/6585517998.

Regret to inform that only shortlisted candidates will be contacted by our consultants.
Align Recruitment Pte Ltd (20C0253)
Kiu Kwong Yik (Reg No. R24119753)

E&E Associate Engineer (2 years contract renewable)

• 5 days, 8.30am- 5.50pm, standby duty might be required
• Salary: $2,700- $3,000
• Address: Bedok

Job scope:

• To perform routine preventive work and site corrective maintenance
• Responsible for integration of both hardware & software work as well as implementation
• Carry out proper execution of the integration/engineering/maintenance work and QA Technical checks throughout project execution
• Handle application programme change management, hardware deployment management & documentation
• Meeting with clients, reports and documentation
• Capable of performing troubleshooting independently

Requirements:

• Diploma in Electrical/Electronic or related discipline
• Able to perform standby duties (standby allowance will be provided if on standby duty) – standby only start maybe 6 months later because need training
• Site maintenance and travelling is required
• Class 3 driving license preferred

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our IE&CE Advanced Mechatronics Department diverse team of talent.

What you will be working on:

• Fault identification, repair and refurbish on component of any of the categories: Turbo pump, Cryo pump, LPT, Indexer, Robot, RPS, Valve, Chiller, Heat Exchanger, Smith Loaders, Electronics/PCBs/Controller, RF Gen, RF Match, LPS, Power Supply
• Conduct acceptance tests on repaired part such that its functionality is repeatable and reproducible to ensure good quality
• Ensure proper knowledge transfer is conducted and supervise Industrial Attachment (IA) students
• Provide support to module Equipment Engineers and perform repairs for semiconductor production equipment and parts in cleanroom environment, on ad-hoc basis
• Adhere to SOP when performing repairs to ensure best quality and to strive to achieve 95% repair success rate
• Perform inventory control on consumables and spare parts used in repair workshop
• Source and liaise with vendors for quotations of required parts and follow up on delivery timeline
• Ensure workplace safety is practiced at all times

More about you:

• Diploma / Higher Nitec / Nitec in Engineering (Microelectronics, Mechatronics, Electrical, Mechanical)
• Minimum 3 years of relevant experience in semiconductor field
• Expertise in either soldering, pumps, valves or strong knowledge in Microelectronics
• Able to perform circuit board repair and component level troubleshooting skills
• Resourceful and has initiative
• Working experience in front end semiconductor industry would be advantageous

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• Collaborate with various teams that includes Development/Infra/Products to ensure successful delivery, maintenance planning and correction of build errors.
• Day-to-day monitoring, backup, deployment and maintenance of systems.
• Knowledgeable in industry best practices for security and security incidents monitoring and alert, so as to implement hack proof systems in the cloud.
• Develop/build/maintain continuous integration/deployment (CI/CD) pipelines and automated testing to support high quality software build in a continuous build/deploy environment (Jenkins Pipeline/Library).
• Writing scripts/programs for service monitoring and health check of systems.
• Automate and build up scalable systems/environment using latest technologies (e.g. Kubernetes) with infrastructure-as-code and GitOps strategy.
• Automate security hardening in testing, deployment and production setup based on industrial best practices.
• Provide technical insights for the design and implementation of solutions. Including but not limited to researching dockerization for various frameworks so to achieve load distribution and scaling.
• Optimize and migrate databases to achieve scalability and efficiency.
• Design and deploy cross regional fail safe always online systems using cloud infrastructure.
• Familiar with cloudflare or imperva CDN cloud front, WAF, anti-hacking methodologies.
• Promote a Dev Ops culture through building relationships with Development & Operations and driving enhancements to the end-to-end release process (workstation to production).

Work Requirements:

• Bachelor's degree in Computer Science, Software Engineering, or a related field
• Min 3years experiences in DevOps with exposure in AWS with a focus on cloud-based infrastructure and automation. (e.g. AWS: EC2,RDS, ELB, EFS, ELK, ElasticCache, S3, VPC, Glacier, IAM, CloudWatch, KMS, AMK,EKS )
• Experienced with building and setting up high velocity and reliable CI/CD pipeline using tools/platforms such as Jenkins, Gitlab CI/CD, CircleCI
• Proficiency with containers and cloud orchestration tools such as Docker, Kubernetes
• Proficiency with systems that support Infrastructure-as-Code ideals, such as Ansible AWX/Tower, RunDeck, Chef, Terraform, Puppet, Cloudformation and so on
• Experience with monitoring and alerting tools, such as CloudWatch, ELK, or Prometheus.
• Experience in Java SE, Docker, Kubernetes & AWS.
• Relevant certifications, such as AWS Certified DevOps Engineer - Professional, are a plus.
• Proficient in LINUX operating system, CENTOS and UBUNUTU

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Electrical) for the next phase of their business. They are located in West.

Duties:

• Lead Electrical discipline for CAPEX projects, supervising consultants, contractors, and vendors.
• Develop and issue Electrical design bases, specifications, and scopes of work.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Approve Electrical deliverables and develop necessary project documents.
• Support regulatory approval processes.
• Collaborate with project management and engineering teams.
• Witness factory acceptance tests (FAT).
• Ensure accuracy of engineering databases (e.g., SmartPlant tools).
• Review and document as-built deliverables.
• Follow Quality Management System and QA plans.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 15 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a highly reputed in the banking domain.

Responsibilities:

• Provide administration and operations end to end support to SIEM Security Analytics Platform and other security solutions related infrastructure deployed within the bank.
• Onboarding new log sources, enabling new use cases and supporting all existing use cases.
• Develop and support case management workflow, reports and dashboards.
• Manage and support the log management environment.
• Monitor SIEM internal logs to identify and resolve potential performance issues.
• Drive upgrades and migration to ensure solutions and or related platform are maintained in tip-top working conditions with proper documentation and RCA.
• Test and manage application functionalities, system and infrastructure changes, upgrades, enhancements, patches and troubleshooting.
• Work within established practices and handling guidelines to triage device outages.
• Available to respond to any requests and assist with troubleshooting activities along with proper documentation.
• Ability to understand of data generated by infrastructure and application across bank.
• Integrate data feeds into SIEM Solutions from on premise and cloud deployed devices and applications
• Automation development on existing data feed and contextual data so we get different data from various log feeds to one location.
• Manage and coordinate change & Incident process engagement with regards to current security solutions.
• Communicate effectively with a variety of internal teams and external contacts including technical and executive contacts.

Skills/Requirement

• ITC/Diploma/Degree in engineering/Computer Science / IT/Cyber Security from a recognized education institution
• Certified in leading SIEM administrator would be plus
• Professional security related qualification (e.g. SANS GCIA, GCIH etc.) will be favorable although not mandatory
• Relevant experience in the area for managing SIEM preferably Splunk/ArcSight
• Hands on experience in Advanced SIEM, Security Analytics solution, Linux and database (MySQL, Oracle/SQL)
• Very strong troubleshooting skills.
• Strong in providing operational support to any SIEM and other security platforms
• Strong knowledge in Syslog log management platform
• Experience in understanding end to end data flow
• Strong knowledge in understanding OS, Proxy, Network and other main-stream Infrastructure, Application, Access and Cloud logs.
• Strong Knowledge in developing custom parsers (regex) required for data ingestion for any infrastructure or application-based data feeds.
• Strong knowledge to optimize performance and outages related to SIEM Solutions.
• Experience in normalize and data preparation to clean the data
• Experience in Data/Device Integration and provide the data back to other platform.
• Knowledge with SOAR platform is an added advantage.
• Experience in Automation using any scripting languages like Python and Shell.
• Knowledge and hands-on experience on implementing Use Cases would be add-on.

We regret to inform that only shortlisted candidates will be contacted.

PERSOLKELLY Singapore Pte Ltd • EA License No. 01C4394 • EA Registration No. R1551626 (SUJA THERESA FRANCIS)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

**********************************

Hydraulic Modeler – Water Distribution Networks

The Hydraulic Modeler for Water Distribution Networks is a key element in the Singapore team dedicated to advancing the state of the art of digital twin systems and delivering cutting edge digital transformation to Water Utilities in Asia. Reporting to the Project Manager for a drinking water network digital twin project in Singapore, the Hydraulic Modeler is in charge of the hydraulic models that will be used in real-time in the system. He/She will also be a main point of contact with the system users, supporting them and gathering requirements for improvements. The Hydraulic Modeler is autonomous but will be supported actively by senior modeling experts from Consulting, providing methodological guidance as well as helping in solving particular issues that may arise.

Responsibilities & Duties

• In coordination with the data scientist in the team, prepare and validate all data to be used for model building and calibration (asset information, sensor data…).
• Build and/or update hydraulic models to ensure a good fit with the structure of the network. Calibrate the model to a level meeting the demands of the client.
• Participate in the definition and validation with the client of the model calibration KPIs, and of the automated model health monitoring module part of the digital twin system.
• Write model building and calibration reports, including for periodic recalibration. Produce drawings as needed.
• Be the point of contact with the client on all topics related to the hydraulic model and its updates, establishing professional relationships and ensuring delivery of the results.
• Assist the Project Manager in monitoring progress, evaluation results and identification and resolution of constraints.
• Participate in the production of all deliverables (study intermediate and final reports, progress reports, ensure their submission in due time).
• Provide training sessions to users when necessary.
• Ensure high standards of HSE in the planning and execution of operational tasks.
• The job description is not exhaustive and may assume additional tasks within the competence of the incumbent.

Requirements:

• Bachelor’s degree in Environmental Engineering or a related field
• Ability to manage competing priorities and meet tight deadlines.
• Ability to treat confidential information with appropriate discretion.
• Strong analytical and problem-solving skills with a focus on continuous improvement and innovation.
• Excellent written and verbal communication skills, including ability to interface with clients is critical.

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

• · Basic Up to $4000 (depends on experience)
• · Perm role with 14 days A/L, AWS, Bonus & other benefits
• · Mon – Fri/ 8.30am – 6pm
• · Office: Pioneer (With company transport provided)

Job scopes:

• · Prepare electrical drawing using CREO/ SolidWorks
• · Compile BOM list and project costs
• · Technical support to clients
• · Involve in equipment commissioning & testing

Requirements:

• · Min. Diploma in Electrical Engineering
• · 1-3 years of relevant experience
• · Able to commence work within short notice period is highly preferred

For consideration, kindly submit your CV by clicking “APPLY Now” or email to [email protected]

**Only shortlisted candidate would be notified**

MTC Consulting Pte Ltd (15C7752) | Teo Hui Yee R22105757

Assistant/Maintenance Engineer (Rotating and Static Equipment)

Responsibilities

• Carry out preventive maintenanceworks in accordance to the preventive maintenance program.
• Manage information and data of maintenance and inspection in the inventory and planning system R-MIC.
• Responsible and coordinate with project team and/or contractors in the big construction or modification work as mechanical engineer.
• Responsible and Coordinate with production team and/or contractors in the investigation of cause of equipment breakdown and propose remedial action.
• Carry out piping design work and manage the actual piping work with safety.
• Carry out small civil design work (e.g. Equipment foundation, Shelter, Loading bay, ACMV and etc.) and manage the actual civil work with safety.
• Coordinate with contractors onsite inspections and repair and maintain and jet cleaning.
• Document management (e.g. To make SOP, WI, RA and presentation slide, To manage drawings for construction, replacement and modification).
• Assist in the preparation of Shut down Maintenance (SDM) planning and execution.
• To take quotation and checking of machine parts and construction work.
• Manage spare parts and consumables inventory for replenishment of stocks.

Requirements

• Min Diploma in Mechanical / Mechatronic Engineering or equivalent.
• Mechanical knowledge and experience (Disassembling, assembling and overhaul of plant equipment and machinery (Such as Pumps, Compressor, Blower, Gear box, Agitator, Mechanical seal and Piping)
• Basic mechanical experience (Maintenance, Repair, Overhaul work)
• Prepared to be on standby to respond to plant emergencies after office hours.
• An effective team player with excellent service attitude.
• Possess strong safety awareness.

Interested applicants please submit your resume to [email protected]

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

5 days, 8.30am- 5.50pm, standby duty might be required

Salary: $2700- $3000

Address: Bedok

Job scope:

• To perform routine preventive work and site corrective maintenance
• Responsible for integration of both hardware & software work as well as implementation
• Carry out proper execution of the integration/engineering/maintenance work and QA Technical checks throughout project execution
• Handle application programme change management, hardware deployment management & documentation
• Meeting with clients, reports and documentation
• Capable of performing troubleshooting independently

Requirements:

• Diploma in Electrical/Electronic or related discipline
• Able to perform standby duties (standby allowance will be provided if on standby duty) – standby only start maybe 6 months later because need training
• Site maintenance and travelling is required
• Class 3 driving license preferred

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683