Total 21,891 quality assurance engineer job vacancies in Engineering category in Singapore

• Calculated BOQ and invited subcontractor for cost estimation.
• Sourced Quotations and Specifications from suppliers and contractors.
• Collected BQ and arranged cost comparison.
• Attended internal, external meeting.
• Performed site inspection to ensure that work is carried out based on specification and drawing.
• Prepared report and method statement whenever necessary.
• Supervised daily site installation.
• Day to Day management of the site, including supervised and monitored the site labour force.
• Inspected Handover inspection with consultant engineer and client.
• Follow up with clients and handover the project
• Good knowledge civil, Structure and M&E deoartment

Responsibilities:

• Checked technical specifications, M&E drawings and documents.
• Coordination of drawings with clients, main contractors and updating of drawings base on meetings and discussion.
• Produced M&E Services design drawing including electrical system and ELV system, Fire Protection system, Plumbing and waste, etc.
• Performed draft detailed for M&E shop drawings, as built drawings and standard detail and SLD drawing, Layout, Schematic based on preliminary concepts, sketches, calculation, specification sheets and other data.
• Provided technical support and assistances to project manager and engineers at every project stages.

Responsibilities:

- Assess Die Overkilling In Line and Optimization of criteria

• Define Sampling Criteria for Yield Enhancement (YE) Wafer – Initial is to align with RPM lot
• Define and Create YE In Line DL2 & MRDA Flow: Full scan with tighter criteria (higher magnification) with non-die-kill
• Create Deviation flow to Route to YE Flow
• Define and Create YE Probe Flow: Full data logging and Test-to-end to capture as much data as possible
• Data Analysis:
• Correlation of MRDA (Metro Real-time defect analysis) Defect to Probe to identify in line failure mode causing probe fail and failure analysis

- Manage Risk of deviation

- Provide organizational leadership to build functional strategies & processes, and collaborate with partners to deliver strategic solutions

• Establish organizational roadmaps and strategies. Apply extensive knowledge and tenacity to carry out strategies.
• Collaborate with peers to construct global solutions.
• Ensure conflict resolution and assist with identifying escalation paths.
• Align internal strategies and communicate line of sight to corporate strategic objectives.
• Establish and communicate department capabilities to ensure partner expectations are aligned.
• Manage conflict and build effective relationships with internal and external partners.
• Initiate and sustain effective communication with internal and external partners.
• Provide advice to senior and executive management on strategic decisions
• Establishes and manages budget/finances for the team

- Ensure a Safe, Compliant, and Ethical Work Environment

• Maintain knowledge of and apply company safety, labor, and ethics policies.
• Communicate requirements and expectations to leaders and external partners.
• Ensure execution of mandatory training for organization.
• Identify and resolve and / or report potential safety, security, and labor issues.

Requirements

• Bachelors, Masters or PhD in Electrical Engineering, Materials Science, Chemical Engineering, or related field
• At least 4 years of experience in Semiconductor Manufacturing and on a leadership capacity, with focus on Advance Packaging technologies and High Bandwidth Memory (HBM) integration, in yield enhancement
• Experience in PWF (Post Wafer Fabrication), Backend engineering process, assembly package technology development and technical knowledge with die and wafer level process technology with understanding of Micron’s silicon and how it interacts at a package level through CPI (Chip Package Interaction), in yield enhancement
• Strong leadership and vision and must be able to comfortably work across organizational boundaries and geographies.
• Demonstrated ability to influence executives, senior leaders and partners on strategic decisions across multiple functions and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Ability to be guided by business objectives and determine best methods for delivering results.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Proven facilitation skills including the ability to influence others, build consensus, and resolve conflict.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill

Keen on the role? Apply now!

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.
We are innovative, focused, and rapidly growing. We are continuously looking for team players who will stop at nothing to deliver state-of-the-art solutions as part of Team Rapsodo.
As a Full Stack Developer, you will design, develop, and deploy robust, secure, and user-centric applications while leveraging the power of cloud technologies. You will work across the entire tech stack, ensuring our applications are scalable, efficient, and aligned with business goals.

Location:

Singapore

Key Responsibilities:

• Develop Full-Stack Applications: Design, build, and maintain responsive front-end interfaces and secure, scalable back-end services.
• Cloud Integration: Leverage cloud platforms (AWS, Azure, Google Cloud) to develop and deploy cloud-native solutions, ensuring optimal scalability and performance.
• Collaborate Across Teams: Work closely with product managers, designers, and DevOps engineers to deliver seamless user experiences.
• Optimize Performance: Ensure applications perform reliably under high usage, implementing best practices for scalability and security.
• Innovate: Stay ahead of industry trends and bring new ideas to enhance our offerings.

• 8+ years in full-stack development with expertise in front-end frameworks (React, Angular, or Vue.js) and back-end technologies (Node.js, Python, Go, etc.).
• Hands-on experience with cloud platforms such as AWS, Azure, or Google Cloud.
• Strong understanding of CI/CD pipelines and DevOps tools.
• Proficiency in building RESTful APIs and microservices architecture.
• Familiarity with containerization (Docker, Kubernetes) and serverless computing.
• Experience with both SQL and NoSQL databases.
• Excellent problem-solving and analytical abilities.
• Strong communication skills to work effectively with cross-functional teams.
• Self-motivated, team-oriented, and driven to innovate.
• A natural curiosity for new technologies and trends in cloud computing and software development.

We are a global leader in sports vision technology, powered by a team that believes in failing fast, learning faster, and winning as a team. At Rapsodo, you'll thrive in a culture driven by customer focus, achieving more with less, and redefining what's possible. If you are eager to work independently while contributing to a dynamic, innovative, and passionate team, we encourage you to submit your application.

Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.

Job Scope:

• Provide technical support and troubleshooting for mechanical products
• Assist in product integration and customer site applications
• Collaborate with sales teams to deliver tailored solutionsX`
• Liaise with R&D to provide customer feedback and insights
• Prepare technical documentation and user training materials
• Conduct product demonstrations and training for clients
• Ensure optimal product performance and customer satisfaction
• Participate in product testing and validation
• Stay updated on industry trends and new technologies

Requirements:

• ITE or Diploma in Mechanical Engineering (or equivalent)
• Strong hands-on skills with small mechanical parts
• Familiarity with AutoCAD 2000, R14, and SolidWorks is advantageous

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Objective:

• Work closely with manufacturers, Designer, and Engineers to implement audio visual and video conferencing solutions in accordance to company’s standards and best practices to meet customer’s requirements

Core Responsibilities:

• System configuration, Testing & Commissioning for Pro-Audio solution for large Venue and corporate meeting room that need integration with other Audio Visual and Videoconferencing solution.
• Conduct end user trainings to end users on how to use the Solution(s) implemented.
• Work closely with in house AV Designers and Engineers from different manufactures like Martin Audio, EV, D&B, BOSE, Samsung, Crestron, Extron, Poly, Logitech, etc to implement full integrated solutions for venues like meeting room, lecture room, experience centre, command centre, auditorium, ballroom, etc

Education Qualification:

• ITE/ Diploma in IT/Engineering/Audio Visual

Optional Certification

• Technical audio certification from renowned audio institution or manufacturer
• Dante Level 1 & 2, Cisco CCNT, CCNA
• Crestron CTI-P101, CTI-P201, Extron Control Professional (ECP), Extron Authorized Programmer (EAP)
• Kramer Control System Designer (301), Kramer Control System Programmer (302)

Experience:

Mandate

• Must have minimum 2 years of experience in System configuration, Testing & Commissioning for Pro-Audio solution that includes all of such equipment: Microphone, Mixing console, Digital Sound Processor (DSP), Amplifier, Speaker.
• Must have min 2 years in DSP programming.

Good to have

• Experience in some of the products like Videowall, LED & LCD Display, videoconferencing, Audio Visual Switches.
• Experience in similar renowned AV brands like Martin Audio, EV, D&B, BOSE, JBL, Tannoy, etc
• Experience in Crestron, Extron, AMX, Kramer automation programming will be an added advantage

Opportunity

1. Acquiring wide and in-depth technical knowledge from renowned manufacturer products
2. Engagement with end users and manufacturers to further enhance communication skills
3. Acquiring skills through Training with Seniors and manufacturers
4. Job rotation will be given for excellent performance.

This is a permanent role with an A1 Main contractor. This is for an LTA project and therefore, if you have previous experience on LTA projects, the prior experience will be an added advantage.

• Minimum 7 years in engineering experience in Civil & Structural works
• Experience in infrastructure projects is mandatory (LTA Project is highly preferred)
• Site experience in Underground roadway project; and
• Design management with consultantancy background on structural engineering is recommended
• Proficient knowledge of structural design, analysis software such as STADD and AutoCAD (or Microstation)
• Good knowledge of authorities’ requirement

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

JOB SCOPES & JOB RESPONSIBILITIES

• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance with the master and detailed work programme.
• Liaise with Professional Engineer on civil related works.
• Liaise with consultants for technical issues and coordinate the site activities with subcontractors.
• Handling of technical and engineering problems.
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time.
• Prepare report and method statement whenever necessary.
• Manage and control workers and monitor their work closely to keep site safer and neat.
• Supervise ongoing site activities closely.
• Other ad-hoc assigned by the Company.
• Good attitude and relevant working experience.

JOB REQUIREMENTS

• Recognised Certificate in Civil Engineering.
• Minimum 5 Years experience in the construction site.
• Independent with good communication skills.
• Good organizational and planning skills.
• Effective communication and coordination skills and teamwork.
• Able to work independently and in a team.

Responsibilities:

• Install, configure, troubleshoot and support servers or virtual machines (Hyper-V / VMware) running on Windows Server operating systems.
• Perform system maintenance, upgrade, patches and incident resolution outside of working hours when required.
• Monitoring and implementing backup solutions for critical systems and data regularly.
• Implement and maintain IT security measures and best practices for systems and address security incidents with latest security trends.
• Assist in the planning and implementation of IT projects, ranging from system upgrades to new system deployments.
• Create and update technical documentation pertaining to systems administration for on-premise systems, Azure and Microsoft 365.
• Any related ad-hoc duties as assigned.

Requirement:

• Minimum 3 years of experience as a System Engineer or Server Administrator.
• Experience with Active Directory, Group Policy, Virtualization, Patch Management, Microsoft Entra and Microsoft 365.
• Experience in cloud platforms such as Azure and AWS.
• Possess excellent communication, problem-solving and analytical skills.
• Ability to work independently.

Job Description

• Perform process/ mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, equipment specification/data sheet, etc
• Provide process / mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Perform technical review of equipment/system vendors’ proposal and submission during procurement detailed design and installation stages
• Prepare the process / mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the equipment suppliers / subcontractors to meet the project schedule for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor degree in chemical/Environmental/Mechanical Engineering
• Minimum 4 Years’ experience in process/mechanical design of water/wastewater treatment plant (design experience in the flue gas desulphurization (FGD) wastewater system/plant (or similar system/plant) would be advantageous); For senior position, candidate must have at least 8 years of relevant experience
• Familiar with relevant standard and Singapore code of practice
• Possess strong inter-personal and communication skills
• Must have advanced computer literacy in commonly used software applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

Responsibilities:

• Demonstrate proficient knowledge in cabling installation.
• Independently deploy resources and manage site operations.
• Respond promptly to service calls to resolve faults.
• Ensure timely delivery and completion of service and maintenance tasks.
• Provide basic IT networking assistance and support.

Requirements:

• Possess a valid Class 3 Driving License.
• Hands-on and eager to learn new skills.
• Previous experience in IT networking and cabling installations preferred.

Interested candidates who wish to apply for the advertised position, please click on the apply button

EA License No: 96C4864

Reg. No.: R2094940

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 5 years’ experience or Diploma holders with 8 years’

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 6pm
• TRAINING PROVIDED

Job Responsibilities:

• Planning / Assign sub-contractors and manpower for the maintenance work and from project handover
• Supervising & Managing of Sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, troubleshooting and upgrading / improvement of system to ensure optimal functioning of BMS/DCS/PLC/SCADA System
• Record servicing & maintenance data and generate service report
• Provide Technical / Operational guidance, engineering solution to the Maintenance Site Facility Management
• Others ad hoc duties as assigned

Job Requirements:

• Minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent
• Knowledge on BMS / PLC / HVAC will be a plus point
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Job Objective:

• Work closely with manufacturers and Engineers to implement and service audio visual and video conferencing solutions in accordance to company’s standards and best practices to meet customer’s requirements

Core Responsibilities:

• System configuration, Testing & Commissioning of Integrated Audio Visual and Videoconferencing solution.
• Conduct end user trainings to end users on how to use the Solution(s) implemented.
• Work closely with in house AV Designers and Engineers from different manufactures like Samsung, BOSE, Crestron, Extron, Poly, Logitech, etc to implement full integrated solutions for venues like meeting room, lecture room, experience centre, command centre, auditorium, ballroom, etc
• Study the schematic drawings to understand the technical & functional requirements to implement each solution
• Assist in after sales services

Education Qualification:

• ITE/ Diploma in IT/Engineering/Audio Visual

Optional Certification

• Crestron CTI-P101, CTI-P201, Extron Control Professional (ECP), Extron Authorized Programmer (EAP)
• Kramer Control System Designer (301), Kramer Control System Programmer (302)
• Dante Level 1 & 2, Cisco CCNT, CCNA

Experience:

Mandate

• Must have minimum 2 years of experience in System configuration, Testing & Commissioning for Audio Visual solution.
• Experience in Crestron, Extron, AMX, Kramer automation programming

Good to have

• Experience in DSP programming
• Experience in some of the products like Videowall, LED & LCD Display, Digital Sound Processor (DSP), Amplifier, Speaker, videoconferencing, Audio Visual Switches.
• Experience in similar renowned AV brands like Samsung, Crestron, Extron, BOSE, EV, Poly, Cisco, Logitech, etc

Opportunity

1. Acquiring wide and in-depth technical knowledge from renowned manufacturer products
2. Engagement with end users and manufacturers to further enhance communication skills
3. Acquiring skills through Training with Seniors and manufacturers
4. Job rotation will be given for excellent performance

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

About our client: Our client is a manufacturer of offshore drilling and production equipment that is well-suited for use in deepwater applications.

About the role:

• Technical focal point to support sales admin and proposal team for day to day quotation and tendering activities for the region.
• Ability to read and interpret customer’s tender technical specifications
• Provide costing reference to sales admin/proposal team for cost and delivery estimate.
• Work and furbish all technical related document including (but not limited to) technical clarification, datasheet, proposal drawing and tender technical answer sheet
• Participate in tendering and quotation activities whenever technical support is required; also to support sales and marketing team from technical perspective when needed.
• Collaborate with Sales, Engineering and Procurement teams to gather necessary information for proposal development
• Able to work in fast paced environment and meet tight schedules

About you:

• At least 5 years of experience in oil field wellhead equipment companies (subsea or surface); At least 3 years’ experience in engineering position;
• Bachelor’s Degree in Engineering preferred; Diploma with 10 years of relevant working experience could also be considered.
• Prior experience in tendering and customer interfacing with oil companies (i.e. via meeting, phone call, written form tendering clarification etc.) will be a big plus
• Experience with CAD software such as SolidWorks, AutoCAD
• Good communication and interpersonal skills
• Knowledge of computer and applications such as Microsoft Word, Excel, PowerPoint and SharePoint
• Knowledge and good understanding of API and relevant industry standards is preferred

Other:

• Work location: Tuas (pick-up transport provided)
• Work hours: Monday to Friday (8am to 5.15pm)

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

We are looking for a Senior Officer to join our Cyber Defense Engineering team. This role focuses on supporting and maintaining cybersecurity applications that protect our organization’s infrastructure. The ideal candidate will have a proactive attitude, willingness to learn, and a foundational understanding of cybersecurity basics.
Key Responsibilities:

• Perform daily health checks on cybersecurity applications, including Splunk, FireEye, Syslog-ng, CAS.
• Assist in troubleshooting technical issues to ensure security applications run smoothly.
• Help with resolving audit findings and support audit-related activities as directed.
• Respond to incidents involving cyber defense applications within the expected timeframes.
• Document technical steps, solutions, and process changes for reference.
• Participate in routine patching and updating of cyber defense applications to keep them secure.
• Work with cybersecurity and IT teams to resolve issues affecting security tools.
• Engage in configuration management to optimize application performance.
• Test and validate changes to settings or policies on firewalls, sensors, and defense tools.
• Assist in performing regular backups and data integrity checks for application data.
• Support vulnerability assessments for cyber defense tools and help fix any issues.
• Coordinate with third-party vendors for application support and troubleshooting.
• Help with log aggregation to ensure accurate data flow within cyber defense applications.
• Create basic dashboards, alerts, and reports in Splunk to improve visibility.
• Manage access control for cyber defense applications in line with security policies.
• Perform routine performance tuning to keep cybersecurity tools efficient.
• Assist in maintaining documentation on application configurations and troubleshooting steps.
• Support disaster recovery exercises for cybersecurity tools to ensure continuity.
• Participate in a rotating on-call schedule for after-hours support as needed

Job Requirements

Qualifications and Skills:

• Degree in Business Information Technology or any related degree from recognized academic institutions
• Minimum 1 year of experience in a similiar capacity preferred
• Basic understanding of cybersecurity infrastructure; exposure to tools like Splunk, FireEye, SOAR, or NDR is a plus.
• Problem-Solving Ability and and interest in learning how to troubleshoot and resolve technical issues.
• Good verbal and written communication skills, with the ability to document processes and communicate with team members.

Good to Have Skills:

• Exposure to cybersecurity operations, basic knowledge of infrastructure, and introductory scripting skills (e.g., Python or Shell) are helpful.

Additional Requirements:

• Rotational On-Call Duty: Willingness to participate in an on-call rotation to support incident response and infrastructure availability.

• Evaluate design package and prepare shop drawing of RC structural works and temporary works.
• Liaise structural design works with design-relevant counter parties and construction team.
• Design of temporary works related to structural design.
• Lead the project department in solving design related matters.
• Manage production, quality, design & engineering and schedule issue.

Requirements:

• Degree in Civil Engineering or equivalent
• At least 5 years of civil & structural works experience in Infrastructure/LTA Projects.
• Proficient in STADD, AutoCAD, MicroStation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Process Engineer (Pick and Place) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line in Pick and Place Process.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects.
• Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
  • New material, process & machine development and qualification.
  • Handle and manage customer audits and 8D reports.
  • Provide disposition for engineering and production lots.
  • Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum Degree in Electrical & Electronics, Microelectronics, Mechanical engineering or relevant engineering discipline
• Experience in Semiconductor manufacturing industry & working in cleanroom environment
• Minimum 3 years hands-on process experience in area of in the Wafer-level Fanout packaging production line or LCD/FPD production line in Pick and Place Process.
• Experience in SPC, DOE, FEMA, and 8D reports

• Exposure to latest technologies
• On the job training

About the company
Our Client is an established company within their industry. They have a well-established presence of more than 10 years. With rapid expansion plan, they are now looking for an IT Engineer / IT Specialist (System & Networks) to join their team.

About the job
Reporting to the IT Manager, your role involves:

• Providing technical support (Computer, printer, mobile device and etc) to users
• Handling networks (Routers, switches, VoIP)
• Supporting and maintaining the Windows Servers and Office 365
• Managing Active Directory (Print Servers, Backup and etc)
• Handling disaster recovery planning
• Managing external vendors, ensuring SLA is being adhered to

Skills and experience required
As a successful applicant, you will have at least 2 years of experience in IT Support. Exposure to IT networks or system will be of added advantage.

Candidates with proven track record in Office 365 / O365 will be of added advantage.

Whats on offer
This is an excellent opportunity to join an established end user environment with on the job training

To apply online please use the 'apply' function, alternatively you can reach me at https://www.linkedin.com/in/hoonteck-nologyrecruitment. (EA: 94C3609/ R1219669)

• Design, build, and maintain CI/CD pipelines using various CI/CD platforms to streamline cloud deployments.

• Integrate automation solutions across applications to enhance operational efficiency.

• Ensure best practices and security are prioritized when developing CI/CD pipelines.

• Continuously improve operational workflows through task automation.

• Collaborate with subject matter experts to ensure automation solutions meet business requirements.

• Act as an innovative, hands-on DevOps engineer, focusing on both the technological and strategic aspects of the platform.

• Proven experience with Kubernetes and containerization technologies.

• Strong understanding about DevOps and DevSecOps terminology.

• Proficiency in automation tools such as Jenkins, GitLab Runner, AWS Lambda, AWS CodePipeline, and AWS CodeBuild.

• Hands-on experience with Infrastructure as Code (IaC) tools like Terraform and CloudFormation.

• Management configuration tool like Ansible, Puppet.

• Familiarity with scripting languages such as Python, Bash, and PowerShell.

• Experience working in multi-cloud environments, including AWS, Azure and GCP