Total 1,552 research assistant job vacancies in Engineering category in Singapore

Assistant M & E Engineer | Interior Design Out Fit | ACMV | Electrical | Fire Protection System | Plumbing | Aljunied

Salary: $3,000 - $3,800 (Salary can be adjusted for more experience)
Working Timing: Monday to Friday – 9 am to 6 pm
Working Location: Near Aljunied / MacPherson / Paya Lebar MRT

Responsibilities:

• Maintains project team accomplishments by communicating essential information; coordinating actions; obtaining expert input; reviewing open issues and action items; contributing information to team meetings and reports; escalating project completion impediments.
• Day-to-day management on site, including supervising and monitoring the site and co-ordinate sub-contract works.
• Liaise with clients and consultants on project.
• Produce proper reports and documentation before and after project completion.
• Complies with codes and regulations by complying with requirements; preparing permit applications, plans, and compliance reports.
• Assist to update of As-Built drawing on site.
• And all other General Administration works as instructed.

Requirements:

• Minimum Diploma or equivalent.
• Min 2 years relevant experience
• Experience in project management (Able to handle Projects ), A&A works, M&E services, As-Built drawing, site supervision and coordination, compliances, and regulations.
• Knowledge/Related Experience in ACMV, Electrical, Fire Protection System, Plumbing and Sanitary Services, and installation of M&E Services on site

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

General Purpose/Scope ( Full training provided)
Support in process improvements, customer returns, cycle time reduction and scrap
reduction initiatives.

Essential Job Duties
§ Work closely with Process/Manufacturing Engineer to monitor and improve the
process capability.
§ Ensure the scrap, production yield and cycle time reduction targets are met.
§ Review process issues, NCR and conduct failure analysis.
§ Updating of Manufacturing work instructions/routers.
§ Participate in cross-functional teams on various improvement projects.
§ Conduct Evaluations/Special Build Request.
§ Support QA for failure analysis and identification of corrective action for customer
returns and internal CAR’s.
§ Preparation of the failure analysis report on customer return parts.

Education & Training
o Nitec / Diploma in Mechanical/Mechatronics Engineering

( Full training provided)

(Junior/Entry Level ) Manufacturing Engineering welcome

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

The project aims at designing and developing cybersecurity solutions for wide range of cyber physical systems / modernized critical infrastructure (e.g., smart home, smart building, smart grid, etc.). The expected outcome is product-ready technologies that can be translated into real-world use.

The successful candidate will be tasked with implementing a number of subroutines, integral to our overall development and/or simulation efforts.

Below are some of the expected tasks.

· Conduct research and development in threat modelling, vulnerability assessment, security integration and testing of cyber-physical systems.

· Develop tools and algorithms that aid in the analysis of system vulnerabilities, cyberattacks, network traffic, and threat hunting.

· Penetration testing, threat hunting, and vulnerability assessment of cyber-physical systems and critical infrastructure

· Implement machine learning based techniques for inferring system invariants from network traffic

· Developing digital twin of smart nation systems for cybersecurity evaluation and planning.

This position requires:

· Bachelor’s or Master’s degree in Computer Science/Engineering or related fields.

· Demonstrated experience in one or more general-purpose programming languages. Strong proficiency or keen interest in C/C++/Python highly preferred.

Besides, depending on tasks, one or multiple of the following skills and experience are preferred.

· Knowledge of and experience with penetrating testing methodology for cyber-physical systems using programming languages such as Python, Ruby, BASH scripting, and Lua.

· Proficiency in web application development prototyping, system integration, and security testing.

· A background or substantial interest in data structures, algorithms, computer networks, and security will be advantageous.

· A strong desire to learn about cybersecurity is essential.

· Experience in network simulator and/or model-based simulators like Matlab Simulink.

· Experience in network and system virtualization technologies is a plus.

· Strong math background.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Electrical Engineer
• Working Location: Tuas
• Working Hours: 5.5 days (Monday to Friday 8 AM – 5 PM, Saturday 8 AM – 12 PM)
• Salary Package: Basic Salary up to $3,500 + AWS + Bonus + OT
• Duration: Permanent

Key Responsibilities

• Provide technical support for troubleshooting, testing, commissioning, maintenance, repair and services operation such as genset synchronizing control system, close transition system, ATS system and genset baseload operation
• Preparation of shop drawings, workings drawings, & as-built drawings
• Attend site meetings with main contractor, consultant and client when required
• Assist the Project Manager in handling and monitoring progress of projects
• Liaise with vendors and subcontractors to ensure timely delivery of goods
• Ad-hoc duties assigned by the Management from time to time

APPLY NOW!!!

• Minimum NITEC in Electrical Technology (Power & Control) or equivalent
• Previous working experience in Electrical Engineering is an added advantage
• Proficient in MS Office
• Good communication and written abilities
• Possess initiative and able to work independently with minimal supervision

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65670 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Assistant M & E Engineer [ Interior Design Out Fit / ACMV / Electrical / Fire Protection System / Plumbing ]

Salary: $3,000 - $3,800 (Salary can be adjusted for more experience)
Working Timing: Monday to Friday – 9 am to 6 pm
Working Location: Near Aljunied / MacPherson / Paya Lebar MRT

Responsibilities:

• Maintains project team accomplishments by communicating essential information; coordinating actions; obtaining expert input; reviewing open issues and action items; contributing information to team meetings and reports; escalating project completion impediments.
• Day-to-day management on site, including supervising and monitoring the site and co-ordinate sub-contract works.
• Liaise with clients and consultants on project.
• Produce proper reports and documentation before and after project completion.
• Complies with codes and regulations by complying with requirements; preparing permit applications, plans, and compliance reports.
• Assist to update of As-Built drawing on site.
• And all other General Administration works as instructed.

Requirements:

• Minimum Diploma or equivalent.
• Min 2 years relevant experience
• Experience in project management (Able to handle Projects ), A&A works, M&E services, As-Built drawing, site supervision and coordination, compliances, and regulations.
• Knowledge/Related Experience in ACMV, Electrical, Fire Protection System, Plumbing and Sanitary Services, and installation of M&E Services on site

Aliena is a leading Singapore-based space-tech company, aiming at providing high-resolution data to terrestrial businesses by enabling a fleet of imaging satellites to fly closer to the Earth using our proprietary electric propulsion engines. In January 2022 Aliena broke the record for the smallest satellite ever to launch with a Hall plasma thruster on board.

We impact lives on Earth by bringing space closer to home. We develop low power engines that enable satellites to fly closer to Earth and provide impactful high quality data to various market segments such as banking & finance, maritime, aviation, agriculture, energy, security, and defence at an affordable rate.

Our engines are mission agnostic, and while our vision is centred around the very low earth orbit, all types of missions are welcome, in any branch of pace exploration or space economy.

By joining our dynamic and visionary team, you will take part in defining the future of Earth observation and state-of-the-art low power plasma propulsion systems.

Your responsibilities

• Perform the electrical design, simulation and analysis of power electronics circuits and systems to meet technical product requirements. The main focus will be on DC-DC power converters.
• Conduct the electrical debug, test, characterization, and validation of power electronics designs.
• Optimise the Power Processing Unit design for coupling with Aliena’s family of Hall effect thrusters. Understand the interactions between power electronics and plasma devices (internal training provided).
• Cooperate with embedded system engineers to improve the Electronic Control Unit and explore the possibility of an integrated ECU-PPU.
• Support the design of laboratory experiments to test the PPU performance coupled with different Thruster Units and power rails.
• Assist in the environmental testing of PPUs and other Aliena systems (might involve travelling abroad).
• Partner with the operations team in planning for the scale production stage of the propulsion system.
• Document and share best-practices.

Qualifications

• Degree in Electrical Engineering or related technical discipline.
• Experience in PCB design and assembly including knowledge of eCAD.

Useful experiences

· Experience in modelling, simulating, and testing of power electronics through tools like PSIM, MATLAB, ORCAD/PSPICE, LTspice, etc..

· Experience in designing and solving technical problems in the area of power and analog circuit design.

If you are not ticking all of the abovementioned qualifications, don’t you worry! We are looking forward to helping you accomplish them together with us!

Ideal profile

• Motivated self sufficient individual, aiming to improve itself as well as the company
• Hands-on approach
• Out-of-the-box problem solver
• Team player

What we offer

• Market competitive compensation
• Personal office computer
• Dynamic and inclusive work environment
• Comprehensive health coverage
• Options under the Employee Stock Option Plan

***Admin note***

Only shortlisted candidates would be contacted directly by Aliena's HR for interviews and further assessment

Responsibilities:

• First level support for IT related issues in the production floor
• Participate in software development and system testing.
• Maintenance support of production software applications
• Ensure that proper documentation of software applications are done
• Ensure compliance to ISO standard operating procedures

Requirements:

• Diploma in Computer Technology or equivalent
• Experience in software application development, providing Factory Software Development and support role
• Visual Basic programming in Oracle databases preferred
• Good analytical and troubleshooting skills
• Candidate (s) with no experiences but possessing relevant academic exposure in software application development and troubleshooting can be considered

To apply, please visit www.gmprecruit.com and search for Job Reference: 23937

To learn more about this opportunity, please contact Yingying at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lai Yingying | Registration No: R1110239

- Setup, operate and maintain all measuring equipment, gauges, and fixtures.

- Proficiency in understanding technical Drawing.

- Perform troubleshooting and repair of equipment.

- Measuring and verified the products to meet customer specification.

- Programming of CNC lathe machine.

- Operate turn mill machines with automatic bar feeder for production.

- Monitor production progress and fine tuning the machine to optimize production of components

- Reduce scrap and meet productivity targets.

- Perform environment clean practices.

- Perform workplace safety and health (WSH) policy.

职位描述：

-设置、操作和维护所有测量设备、仪表和夹具。

-熟练理解技术图纸。

-执行设备的故障排除和维修。

-测量和验证产品以满足客户规格。

-数控车床编程。

-使用自动棒料送料机操作车铣床进行生产。

-监控生产进度并微调机器以优化组件的生产

-减少废品并实现生产率目标。

-执行环境清理实践。

-执行工作场所安全与健康 （WSH） 政策

Entry level Nitec / Diploma in Engineering X 5 Opening

Junior/Senior / No experience / Entry level welcome apply ( X5 Permanent Role Opening ) URGENT !!!

Good Pay + Good allowance + Good Bonus

Full training provided for Entry Level

The Job

• Assist Supervisor in day-to-day operation lines. Planning & Co-coordinating the workflow on production lines to achieve production targets. Trouble shooting production problems and assist in planning new project work.

Requirement

• Diploma / PSB Diploma / Higher Nitec / Nitec in Mechanical / Mechatronics Engineering or others Engineering related

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Duties and Responsibilities

1. Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.

2. Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.

3. Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

4. Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

5. Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

6. Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

7. Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

8. Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System

9. Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

10. Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

11. Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

12. To support the group during incidents, accidents and emergencies.

13. Ensure excellent housekeeping are maintained within all work areas.

14. Maintain a high level of work discipline and standards.

15. Perform any other task as assigned.

Duties and Responsibilities

1. Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.

2. Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.

3. Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

4. Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

5. Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

6. Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

7. Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

8. Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System

9. Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

10. Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

11. Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

12. To support the group during incidents, accidents and emergencies.

13. Ensure excellent housekeeping are maintained within all work areas.

14. Maintain a high level of work discipline and standards.

15. Perform any other task as assigned.

· Perform maintenance tasks onboard vessels (mainly in harbour)

· Perform maintenance works onboard vessels in shipyard occasionally

· Perform maintenance works on shore-based systems

· Perform defect troubleshoot till module/card level onboard vessels or shore-based systems

· Perform repairs to modules and PCBA in workshop

· Perform installation/removal work for equipment/systems

· Perform refurbishment of electronics unit/assemblies

· Perform technical admin work including quotations, closing jobs, service reports, etc.

Requirements

Academic Qualification:

· Diploma/Degree on Electronics Engineering/Telecommunication Engineering/ Digital and Network Engineering/ Mechatronics Engineering/IT/Software

· Aerospace Engineering certifications with Electronics Engineering modules may also apply

· RSN maintenance training certifications would be considered

Experience: (would be advantageous)

· Working knowledge and experience working in on-board commercial and military vessels on Communications and Electronics systems

· Window or Linux OS administration (installation and troubleshooting) experience

· Working knowledge and experience on computer systems

· Understanding maintenance regime and basic experience in troubleshooting system till card level.

· Training would be provided if necessary.

Personality:

· Good interpersonal skill

· Good teamwork and discipline

Responsibilities

• Support in process improvements, customer returns, cycle time reduction and scrap reduction initiatives.
• Work closely with Process/Manufacturing Engineer to monitor and improve the process capability.
• Ensure the scrap, production yield and cycle time reduction targets are met.
• Review process issues, NCR and conduct failure analysis.
• Updating of Manufacturing work instructions/routers.
• Participate in cross-functional teams on various improvement projects.
• Conduct Evaluations/Special Build Request.
• Support QA for failure analysis and identification of corrective action for customer returns and internal CAR’s.
• Preparation of the failure analysis report on customer return parts.
• Co-ordinate and expedite First article build with Production.
• Participate as a team player in maintaining a conducive, healthy & safe work environment.
• Maintains good housekeeping, safety and discipline in work area.
• Hands-on experience in assembly of prototype module.
• Perform other duties as requested by management.

Requirements

• Diploma in Mechanical/Mechatronics Engineering is preferred.
• Min 2 years working experience in manufacturing environment.
• Good knowledge and skill in Solidworks is an added advantage.

Interested applicants, please click "Apply Now" or forward a detailed resume as MS Word format / PDF and email to [email protected]

Tempserv Pte Ltd

EA License No: 06C3745

Daniel Lee / EA Registration No: R1989151

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

$2500 – $2800

5-day work week. Mondays to Fridays: 8:30am to 6pm

Office: Pandan Road Singapore

Transport: We have company bus departing near Clementi MRT station at 8.10am to bring staff to our office and a return company bus trip back to Clementi in the evening.

Job scope:

• Produce 2D engineering drawings using AutoCAD for fabrication and submission to client
• Produce 3D drawings for presentations
• Purchasing of materials
• Coordinate, schedule and supervise work assignments together with workshop supervisor
• Answer queries from salesperson and to provide quotations
• Supervise and conduct load test for the assigned equipment
• Prepare cost estimation
• Liaising with sub-contractors and suppliers and inter-department personnel
• Submission of final costing to Finance Department
• Control & record assets movement
• Update asset master list
• Dispose / transfer of asset
• Prepare & maintain documentation
• Assist in audit

Requirements:

• Diploma in Engineering or equivalent
• Working knowledge of 2D AutoCAD or 3D solidworks is an added advantage
• Proficient in MS Office

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Job summary

• Acquire proficiency in packing finished goods from mobile vessels into drums of various sizes.
• Develop competency in packing finished goods from fixed tanks into drums using mechanical pumps, including performing tank cleaning through the automated Cleaning-in-place (CIP) process after packing.
• Attain proficiency in packing finished goods from fixed tanks into drums using diaphragm pumps, including conducting tank cleaning through the automated CIP process.
• Throughout the training period and after acquiring the necessary skill sets, the contract technician may undergo rotation among Fragrance, Cosmetic Ingredient, and Oral Care plants for additional training.
• Gain expertise in compounding at Fragrance, Oral Care, and Cosmetic Ingredient plants.

Requirements

• Min A Level/ NITEC/ Diploma in any related course of studies
• Keen to explore the engineering field
• No experience required as training will be provided
• Require to carry out hands on duties like carrying heavy equipment parts / raw materials (~25kg)
• Able to commit at least 6 months.

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Entry level Nitec / Diploma in Engineering X 5 Opening

Junior/Senior / No experience / Entry level welcome apply ( X5 Permanent Role Opening ) URGENT !!!

Good Pay + Good allowance + Good Bonus

Full training provided for Entry Level

The Job

• Assist Supervisor in day-to-day operation lines. Planning & Co-coordinating the workflow on production lines to achieve production targets. Trouble shooting production problems and assist in planning new project work.

Requirement

• Diploma / PSB Diploma / Higher Nitec / Nitec in Mechanical / Mechatronics Engineering or others Engineering related

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

General Purpose/Scope ( Full training provided)
Support in process improvements, customer returns, cycle time reduction and scrap
reduction initiatives.

Essential Job Duties
§ Work closely with Process/Manufacturing Engineer to monitor and improve the
process capability.
§ Ensure the scrap, production yield and cycle time reduction targets are met.
§ Review process issues, NCR and conduct failure analysis.
§ Updating of Manufacturing work instructions/routers.
§ Participate in cross-functional teams on various improvement projects.
§ Conduct Evaluations/Special Build Request.
§ Support QA for failure analysis and identification of corrective action for customer
returns and internal CAR’s.
§ Preparation of the failure analysis report on customer return parts.

Education & Training
o Nitec / Diploma in Mechanical/Mechatronics Engineering

( Full training provided)

(Junior/Entry Level ) Manufacturing Engineering welcome

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Electrical Engineer
• Working Location: Tuas
• Working Hours: 5.5 days (Monday to Friday 8 AM – 5 PM, Saturday 8 AM – 12 PM)
• Salary Package: Basic Salary up to $3,500 + AWS + Bonus + OT
• Duration: Permanent

Key Responsibilities

• Provide technical support for troubleshooting, testing, commissioning, maintenance, repair and services operation such as genset synchronizing control system, close transition system, ATS system and genset baseload operation
• Preparation of shop drawings, workings drawings, & as-built drawings
• Attend site meetings with main contractor, consultant and client when required
• Assist the Project Manager in handling and monitoring progress of projects
• Liaise with vendors and subcontractors to ensure timely delivery of goods
• Ad-hoc duties assigned by the Management from time to time

APPLY NOW!!!

• Minimum NITEC in Electrical Technology (Power & Control) or equivalent
• Previous working experience in Electrical Engineering is an added advantage
• Proficient in MS Office
• Good communication and written abilities
• Possess initiative and able to work independently with minimal supervision

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65670 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Consulting Firm (Construction)
• Position Title: Assistant Engineer (Civil/Construction)
• Working Location: West (Nearest MRT: Jurong East)
• Working Hours: 5 days (Monday - Friday 8:30 AM - 6:30 PM)
• Salary: Up to SGD 2800 + Bonus
• Duration: Permanent Role

Key Responsibilities

• Work independently and complete work assignments within set deadlines
• Apply an inquisitive and resourceful approach to problem-solving
• Manage and oversee civil and structural engineering projects
• Demonstrate proficiency in BIM and CAD software such as AutoCAD, Revit, etc
• Be willing to learn and explore new skills as assigned by the company

APPLY NOW!!!

• Diploma in Civil & Structural Engineering, Built Environment, or relevant qualification.
• Candidates without experience are welcome to apply. Training will be provided.
• Accreditation with Singapore IES-ACES Joint Accreditation Committee (JAC) is preferred.
• Experience in restoration, civil & structural engineering, or project management is advantageous.
• Skills in Microsoft Office suite and CAD software (BIM and point cloud processing capability preferred).
• Flexibility to rotate between the office and on-site work; willingness to travel and work overseas if there is a business need.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65099 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• 6 days work week
• Basic $2.8k - $3.5k
• Industry: Piling & Foundation Speliacist Contractor
• Location: Project Basis - Across Singapore

Job Scope:

• Ensure smooth site operations through proper planning of manpower & resources for daily activities.
• Coordination with site staff and contractors on site work arrangement.
• Arrange and join inspection with inspector & contractor to ensure compliance as requirement from BCA & specification of engineering design based on the project.
• Study drawing in detail to foresee and pre-plan on solution that might needed for certain difficulties of the activities that will be carried out.
• Oversee the workplace safety & ensure it is complied to safe work procedure & regulation.
• Study and prepare safety document to identify the hazards of activities & prepare safe work procedure to be granted for approval.
• Routinely update work status to superior & QS department for tracking & claim purposes.

Job Requirement:

• Diploma/Degree in Civil Engineering or Equivalent Studies
• Entry level is welcome to apply as training will be given
• Candidate with construction experience in piling & foundation work would be an advantage

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

• Keen to learn & develop into a Professional Pet Groomer but do not possess any relevant experience yet
• Must be an effective team-player with good communication and interpersonal skills
• Able to handle dogs (small & large), cats and rabbits with different temperaments
• Able to work on weekends and public holidays
• Must have perseverance, love, patience and passion while working with pets
• Willing to accept teaching from the mentors and work assigned from time to time
• Maintain Cleanliness

Singaporean, PR, or Work Permit are welcome to apply.

Job Description

• Position: Assistant Facility Engineer
• Well Established Japanese Manufacturing MNC
• Working Location: Pioneer
• Island Wide Company Transport Provided
• Working hours: Monday – Friday (8:00am – 5:00pm)
• Salary (commensurate with experience): Up to $4,000 + AWS + Performance Bonus
• Medical and Dental Insurance Provided
• Duration: Permanent
• Industry: Manufacturing

Main Responsibilities:

• Ensuring that machinery, systems, infrastructure, and equipment run optimally with minimal downtime.
• Follow the ISO 45001 management system of Occupational Health and Safety.
• Upkeep the ISO 9001 and 14001 management system documentation.
• Coordinate and perform routine, preventive maintenance activities on existing system / equipment and respond to any faults.
• Coordinate with vendors and consultants as necessary to solve equipment problems.
• Schedule all repairs on equipment ensuring proper testing, calibration, preventive maintenance is performed while ensuring quality standards are met.
• Performs other related duties as assigned.

Requirements:

• Minimum Diploma in Mechanical, Electronic or Electrical Engineering.
• At least 1 year of relevant experience.
• Experience in the manufacturing industry is an added advantage.
• Proficient with MS Office application.
• Proactive, independent, resourceful & positive working attitude.
• Team-working skills to liaise and work cooperatively with individuals at all levels.
• Excellent diagnostic and problem-solving skills.
• Able to work under pressure.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Henry Heng

Consulting Manager

Reg no.: R1982999

EA No: 20C0257

Job Title: Assistant Engineer - Testing and Commissioning of Communication Systems

We are currently seeking a highly motivated and skilled individual to join our team as an Assistant Engineer in the field of Testing and Commissioning of Communication Systems. This is an excellent opportunity for individuals looking to grow their career in a dynamic and fast-paced environment.

Responsibilities:

• Assist in the testing and commissioning of communication systems, including but not limited to telecommunication networks, radio systems, and data transmission equipment.
• Collaborate with the engineering team to perform quality checks, troubleshoot issues, and ensure proper functionality of communication systems.
• Conduct tests, inspections, and evaluations of communication equipment and systems to verify compliance with specifications and industry standards.
• Document test results, generate reports, and maintain accurate records of all testing and commissioning activities.
• Assist in the installation, configuration, and maintenance of communication systems as required.

Requirements:

• Educational qualification in Electrical Engineering, Telecommunications Engineering, or a related field.
• Prior experience or knowledge in testing and commissioning of communication systems is preferred.
• Strong analytical and problem-solving skills with attention to detail.
• Excellent communication and interpersonal skills to collaborate effectively within a team environment.
• Ability to work independently, prioritize tasks, and meet deadlines.
• Proficiency in relevant software tools and testing equipment.

We offer competitive compensation and benefits packages, along with opportunities for professional growth and development. Join our team and be part of a company at the forefront of communication system advancements.

To apply, please submit your resume, cover letter, and any relevant certifications to [[email protected]]. Kindly include "Assistant Engineer" in the subject line.

We appreciate all applications, but only shortlisted candidates will be contacted for further consideration. Thank you for your interest in joining our team.

The successful candidate will join the finance department in Engineering division in SIA.

Key Responsibilities

• Timely payment of Engineering Division account payables, receivables, fixed costs forecasting, budgeting & control
• Passenger and Freighter Aircraft Variable Costs Forecasting and Budgeting, and Capital Expenditure Forecasting, Budgeting & Control
• Asset Accounting (Spares, Capitalised Maintenance costs)
• Perform month end closing, prepare monthly schedules, timely and accurate accrual of expenses for the purpose of monthly reporting.
• Freight Invoice Verification and monitoring and clearance of suspense accounts
• Withholding Tax Reporting and Interested Party Transaction (IPT) Coordinator
• Scribe of Finance Meetings
• System enhancement/ implementation

Requirements

• Degree in Accounting or Commerce or Business Administration.
• Meticulous.
• Good interpersonal skills.
• Good analytical skills.
• Effective communications and problem solving skills.
• Project management skills.
• Must be a team player.

Job Description

• Position: Assistant Process Engineer
• Well Established Japanese Manufacturing MNC
• Working hours: Monday – Friday (8:00am – 5:00pm)
• Salary (commensurate with experience): Up to $3,500 + AWS + Performance Bonus
• Outpatient and Dental Insurance Provided
• Working Location: Jurong West
• Island Wide Company Transport Provided
• Duration: Permanent
• Industry: Manufacturing

Responsibilities:

• Responsible to maintain day-to-day operation of assigned processes in the Dept.
• Responsible for quality and process issues troubleshooting.
• Responsible for process improvement and cost saving activities
• Provide up-to-date process status and liaise with Production to ensure smooth production operation.
• Provide training and certification to Operators on process operation
• Support ad-hoc engineering tasks assigned.

Requirements:

• Possess Degree in Engineering in any discipline.
• Minimum 1 years of experience in a manufacturing environment.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Henry Heng

Consulting Manager

Reg no.: R1982999

EA No: 20C0257