Total 20,281 technical support engineer job vacancies in Engineering category in Singapore

Essential Duties & Responsibilities:

 Working with all electrical design, preparation for water treatment system and associated

system interface with skid, pump, control panel, instruments, etc.,

 Provide Design support for Various Electrical Services (HT/LT/ICA etc.) including design

data sheet and conceptual design drawings.

 Coordinates with the Engineering/project/process team and other disciplines as well.

 Assist and support team for the design, implementation.

 Responsible for design of electrical systems and/or communications systems; ensuring

that these systems meet applicable standards & codes.

 Knowledge of power distribution systems, circuit, and load protection systems

 Oversee the project’s conception, design and specifications and manage scheduling,

estimating, and securing materials.

 Expertise in using AutoCAD software for developing and update all drawing.

 Experience in drafting electrical drawing such as wiring and single line diagram, cable

routing.

 Preparing technical documents such IO list, PLC programming, datasheet, and

specification.

 Perform monitoring on platform, functional checks, setting, testing, failure analysis.

 Assists in preparation of electrical engineering calculations in support of electrical system

designs including, electrical equipment sizing, feeder sizing and equipment selection.

 Guide designers to prepare drawings.

 Coordinate requirements with other disciplines.

 Work with Project Managers and other team members.

Skills & Experiences required:

 Bachelor’s degree in engineering with 10years’ experience in water and wastewater treatment.

 Skill in AutoCAD - Proficiency in MS Office, Adobe Acrobat

 Effective communication skills, both verbal and written

 Ability to work independently with mínimal supervision.

 Accurate and attentive to detail

 Ability to assist and work well with others.

 Fluent in English speaking and writing

Responsibilities:

• Maintain internal system platform and client devices, and proactively plan for improvement of quality, effectiveness and efficiency.
• Demonstrate good knowledge and technical proficiency in server platform such as Windows Server, Linux and VMware.
• Effectively administrate Windows Active Directory, Symantec Endpoint Protection, Veeam Backup, Cisco L2 Switches and Palo Alto Firewall.
• Provision Windows 10 desktop and Microsoft Intune managed laptop.
• Risk & Control
• Provide timely escalation and resolution of major issues to Management and Head Office teams.
• Client & Stakeholder Engagement
• Flexibly correspond to the operation and collaborate with staffs within organization and from Head Office.
• Work as a technical specialist with the responsibility to plan and deliver technical deliverables and coordinate with internal teams, partners/vendors and key stakeholders.
• Projects & other responsibilities
• Prepare and present regular reports and documentations.
• Ensure that the task status and progress are communicated across to stakeholders in a meaningful manner.
• Clear understanding of ITIL Change, Problem and Incident management frameworks.
• Other ad hoc duties as assigned by the company

Responsibilities :

Possess fundamental knowledge of security and vulnerability-based approach to security hardening.

• Hands-on experience in VMware, Windows Server and standard platform maintenance products such as anti-malware, server backup and log audit software.
• Fundamental knowledge of Cisco LAN and Firewall administration.
• Experienced supporting IT infrastructure in a middle size organization (approx. 200 staffs) with at least 3 years of technical delivery experience.
• Experience in physical server, virtual server, network and storage systems.
• ITIL v3 Foundations Certification is an advantage.
• Possess good and assertive verbal, written communication skills and presentation skills.
• Ability to work in a fast-paced environment with constantly changing priorities.
• Good bi-directional and collaborative attitude in order to work as a professional in a team
• Establish and maintain a good relationship with stakeholders based on trained interpersonal skills.
• Strong analytical and problem-solving skill.
• Able to work independently and as part of a team.

Kindly send resume to [email protected]

• Calibration of pressure, temperature, pH and instruments in laboratory and customer sites.
• Familiar with CMC table and able to calculate CMC and uncertainties for pressure and temperature.
• Lab/ onsite ISO-17025 calibration jobs.
• Familiar with ISO/IEC 17025: 2017 & ISO 9001: 2015 requirements.
• Assist in lab audits
• Ad hoc duties

Requirements:

• Min Diploma/Degree in Engineering
• Min 2-3 years of laboratory experience in pressure, temperature and PH testing methods
• Familiarity with a quality system such as ISO 17025 or ISO 9001.

Interested & qualified applicants, please forward your latest CV in MS word format to [email protected]

Work Your Magic with us!

Ready to explore, break barriers, and discover more? We know you’ve got big plans – so do we! Our colleagues across the globe love innovating with science and technology to enrich people’s lives with our solutions in Healthcare, Life Science, and Electronics. Together, we dream big and are passionate about caring for our rich mix of people, customers, patients, and planet. That's why we are always looking for curious minds that see themselves imagining the unimaginable with us.

Your Role:
The individual performs a variety of tasks within the Transformation Office and Quality department that are associated with maintaining regulatory compliance of GxP computer systems (and other business managed applications) throughout their lifecycle. Will participate in and/or lead project teams across global operational departments to implement business-managed applications.

What You Do

• Perform administration tasks for a variety of GxP systems and associated software in a regulated (GxP) environment following defined procedures. Defining, assigning, documenting and managing user access across CTS.
• Develop and implement processes to ensure Data Integrity assurance: focusing on accuracy, reliability, and security across organizational systems.
• Lead Software/System Development Lifecycle (SDLC) activities and manage Operational Technology (OT) deliverables (including but not limited to System Inventory management, Risk Assessment, Infrastructure Management, Data Classification and Protection, Data Privacy assessments and Service Level Agreements).
• Own, manage and maintain GxP system lifecycle activities (including but not limited to Change management, SOP management, Events/CAPAs, Disaster Recovery and Business Continuity processes, Data Integrity assessments and implementing Data Integrity controls).
• Act as liaison with wider business and collaborate between CTS departments on all SDLC activities (including but not limited to Validation, Change Management, Periodic Review, Decommissioning) for GxP computerized systems. Ensures transition of OT Systems from project to operations.
• Responsible for troubleshooting, incident management, servicing, maintenance, or other support functions for software or firmware associated with laboratory systems including OS upgrades, patch management, Infrastructure management and system security.
• Acts as liaison and interface between laboratory users, IT, OT, Engineering, Validation and external vendors in selection, implementation and lifecycle management of laboratory systems. Responsible for maintenance plan and contracts with vendors
• Responsible for timely communication of status of user requests and/or system outage reporting (e.g., helpdesk tickets).

Who You Are:

• Degree in Science or Technical area.
• 2 years’ in a technical role supporting regulated software applications or laboratory systems
• Minimum of 3 years’ experience in regulated (GxP) environment
• Understanding of GxP regulations and guidelines including but not limited to GAMP 5, US Code of Federal Regs. 21 CFR Part 11 and Part 211, Eudralex Volume 4, Annex 11 & Annex 15, ICH Q7, Q8, Q9 & Q10.
• Acts ethically and ensures quality of own work and that of others.
• Works with agility and willing to embrace and implement change on a global scale.
• Applies technology to drive digitalization, improve quality and increase customer value.
• Excellent communication and facilitation skills (ability to lead cross-functional meetings, demonstrated ability to bring consensus among diverse cross-functional teams).
• Proficient knowledge and application of FDA and EU regulations (cGMP, GLP)
• Advanced knowledge and application of data integrity regulatory guidance (e.g., FDA, MHRA, WHO)

What we offer: We are curious minds that come from a broad range of backgrounds, perspectives, and life experiences. We celebrate all dimensions of diversity and believe that it drives excellence and innovation, strengthening our ability to lead in science and technology. We are committed to creating access and opportunities for all to develop and grow at your own pace. Join us in building a culture of inclusion and belonging that impacts millions and empowers everyone to work their magic and champion human progress!

Apply now and become a part of our diverse team!

• Up to $5,000
• Changi Airport Project

Responsibilities:

• Knowledge of ACMV/HVAC air-conditioning.
• To ensure the maintenance programs and rectification jobs are manage by a team of technical officers and technicians efficiently.
• Responsible for the daily AC thermal comfort are within acceptable limit.
• Ensure adherence to quality standards and health and safety regulations.
• Provides project status of assigned task list items to Facilities supervisors, managers, technicians, and other internal department personnel, as necessary.
• Works as a collaborator and with a wide variety of other professionals to find unique solutions to challenging problems.
• Implement efficiency improvement on the operational process, innovating and implementing systems improvement on energy conservation.
• Preparing reports and documentation.
• Creating maintenance plans and schedules.
• Coordinating contractors for installation and maintenance projects.
• Checking work completed by contractors for compliance and safety.
• Plan, schedule and supervise Preventive and Corrective Maintenance work activities, priorities and reallocate resource when required, on ACMV equipment system under the responsibilities of Facilities organization.
• Conducting research on systems and equipment and presenting this information to key stakeholders and decision-makers.
• Evaluating the efficiency of systems and equipment within a facility.
• Lead and participate in equipment and system abnormalities root cause analysis, attend review meeting, and provide update, then execute corrective and preventive action for continual improvement, this includes installation and modification work on existing or new mechanical equipment and system.

Requirements:

• A Bachelor’s degree in Engineering (mechanical, electrical, or industrial).
• At least 3 years of hands-on experience in ACMV works or a related field.
• Proficient knowledge of construction principles and building processes.
• Thorough understanding of building regulations and health and safety protocols.
• Exceptional communication skills, with the ability to collaborate effectively with non-engineering team members.
• Strong problem-solving abilities and the capability to troubleshoot issues on-site.
• Experience with project management principles.

OTHER INFORMATION:

• Salary: From $4,000-$5,000 / Negotiable (Salary will commensurate according to experience & qualifications).

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Primary Purpose:

Functions as a senior technical specialist or in a lead role in mechanical design. Works independently and applies advanced engineering techniques and analyses for problems and methods.

Responsibilities:

• Concept, Functional, Preliminary and detailed design of mechanical process systems for water and wastewater treatment plants, including screening equipment, physical-chemical treatment plants, biological treatment plants, blower equipment, odour control plants, disinfection plants and sludge treatment plants
• Concept, Functional, Preliminary and detailed design of various pumping systems for water, wastewater and sludge treatment plants
• Concept, Functional, Preliminary and detailed design of ancillary systems including chemical feed systems, mechanical ventilation systems, and drainage systems
• Preparation of General Arrangement and equipment layout drawings
• Preparation of mechanical process equipment and pump specifications
• Mechanical equipment and pipe sizing and calculations
• Review and evaluation of vendor submissions
• Coordination with other disciplines e.g. civil, structural, electrical, building services, and instrumentation & control designers
• Lead meetings, discussions with clients, contractors and vendors
• Provide engineering support for bids & proposals
• Provide engineering support during construction
• Provide engineering support during testing and commissioning
• Provides project cost estimates to client
• Design management and project management of proposals and projects where the scope is primarily mechanical / process

Preferred Qualifications

• A Professional Engineer (PE) registered with Professional Engineers Board Singapore or Chartered Engineer
• Possess a university engineering degree (mechanical)
• Candidate shall have minimum of 10-15 years’ experience in the mechanical design of wastewater treatment (municipal and industrial)
• Able to work independently in producing the project deliverables to meet project timeline
• Leads and guide a team of engineers and carries out QA/QC work on their designs
• Proficient in written and oral communication with good interpersonal skills

Job Responsibilities:

• Design and develop modules for high-speed Flip Chip Bonder.
• To be able to design and develop Bond heads and/or Wafer Modules with high-speed ejection system and/or High-Speed Pick and Place modules.
• Responsible for 3D & 2D drawings, tolerance analysis, BOM preparation.
• Planning, Scheduling and Costing of Machines and Mechanical Modules
• Working closely with Electrical, Vision and Software Engineers.
• Work extended hours in critical phases of project execution.
• Travel for Machine Installations and Buy Off

Job Requirements:

• Diploma or Degree in Mechanical Engineering or related technical disciplines.
• Minimum 3 years of design experiences in semiconductor machines. Especially Flip Chip or Die Attach. Experience on SMT machines is a plus.
• Experience with Design and Development of High-Speed Pick and Place Systems, Flip Chip Bonders, Die Attach Machines is a must.
• Strong fundamentals in mechanical concepts and problem-solving skills, including knowledge in stack tolerance.
• Knowledge of high-speed Valves and High-Speed Electronics is a definite plus
• Proficiency with Creo is a definite advantage.
• Experience with vision application, thermal modelling, calculation and measurement techniques would be an advantage.
• Self-motivated individual who is action/results oriented, independent, and flexible, with a passion for developing technical excellence products.
• Willingness to get hands-on during development cycle.
• Excellent communication skills, with cross-cultural awareness and understanding.
• Able to work under tight schedules.

Roles & Responsibilities

· Responsible for electrical and instrument preliminary and detailed design, costing, procurement and execution for company's proposals and projects

· Front end engineering design and detailed engineering design work of electrical (load calculation, SLD design, cable scheduling, cable routing, instrument hookup), drawings and relevant documents for submission

· Work out the BOM, Schedule and follow up with Procurement for timely delivery

· Work with inter departments, customers, and vendors to deliver the best technical solution for the electrical works

· Support project implementation by attending site on a daily or regular basis to facilitate the flow of and resolution of field issues

· To lead testing and commissioning of electrical systems

· To monitor and update project schedule

· To manage and supervise the clearance of punch list to ensure timely project completion

· To prepare document for submission and handover to clients

· Other ad-hoc duties as and when assigned.

Requirement

· Bachelor's Degree in Electrical / Electronic Engineering

· Preferably Proficent with AutoCad Plant 3D

· Min 3 years of working experience in related field

· Able to work independently and a team player

· Honest, responsible, and organized

Responsibilities:

• Assist Project Manager in monitoring and managing the day-to-day operations of project.
• Liaise with consultants and/or sub-contractors on the project matters.
• Attend regular meetings with owner/client/contractors/sub-cons on the project related matters.
• Check drawings and raise technical queries to resolve the discrepancies in between drawings and as well as those arisen during the project execution.

Requirements:

• Candidate must possess at least Bachelor's Degree in Engineering - Civil/Construction/Structural or equivalent.
• At least 1 to 2 Year(s) of working experience in the building construction is required for this position.
• Preferably with main-con experience on residential projects.
• Preferably can communicate in both Chinese and English.

Job Description

• Preparation & Review of Load lists, Single Line diagram of PCC, MCC, DB's, Equipment Sizing Calculation, Electrical room layouts, Cable and Power Layout, Substation Equipment layout, Earthing & Lightning protection Layout.
• Design and develop cable raceway design.
• Design and develop busduct. Busbar routing drawings
• To coordinate and liaise with sub-contractor on project related matters to ensure to smooth execution of site work.
• Able to resolve technical issues related to installation, commissioning and testing
• Ensure the installation works are done according to the approved shop drawing, method statement, project specifications and relevant standards.
• Attend regular site meetings with Clients/Sub-contractors to discuss and resolve the site matters.
• To assist Project/Site/Construction Manager on handling and monitoring the project progress.
• Review project specifications, technical proposal/design documentations from the electrical subcontractor/supplier and liaise with project consultant / client for the approval of technical documentations/drawings
• Preparation of Material Requisition, Specifications, Technical Bid Evaluation for Electrical works
• Reviewing Vendor Drawings for Transformers, Switchgears, Cables, Distribution Boards, Junction Box, LCS, Motors etc.
• Knowledge of AC/DC Power Distribution Systems including selection of circuit breakers, power supplies, contractors, cable sizing, etc.
• Able to check electrical design code of practice IEC, IEEE, Singapore Standards.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Willing to take on responsibility and make effort to meet project deadlines.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines

Requirements

• Preferably Bachelors’ Degree in Electrical Engineering
• Preferably Minimum 5 years of experience
• Exeperience with AutoCAD, REVIT, ETAP is preferred
• Familiar with Microsoft Office software and PDF editing related software
• Able to work 5.5 days per week and full time at Tuas Site (Two-way company transport provided from Jookoon)

EUC Engineer L2

Brief Description:

End-User Support, strong in supporting all Windows, iOS, and macOS systems, applications, and networking related.

Responsibilities

• Basic help desk resolution and service desk delivery.
• Routine System administrative activities
• Resolve incidents escalated by L1/Helpdesk as per the agreed SLAs and timelines. They usually have a Run-Book/KB which they can refer to for immediate resolutions. They are also supposed to coordinate with any other support or dependency groups in case the incident has any linkage.
• Troubleshooting for Alert logs files, transaction logs and backup logs.
• Troubleshoot End to End User Devices
• Run the backups, recovery errors, respond to the request regarding the restoration of the DB
• Responsible on making backup tapes schedule and changes.
• Monitor the metric alerts, performance-related issues like high CPU utilization, Application performance, high Memory utilization, Application tuning and Query.
• tuning
• Acknowledge the request for DB stop/start, user creation and grant specific data access to user.
• System upgrades/migrations
• Making sure Inventory is updated.
• Escalates the problem to next level/Vendor.
• Good working experience in iOS devices ( iPad, MacBook, & iMac )

Requirements

• Higher Nitec and above in Information Technology or related field
• Provide IT technical service desk and onsite support for end-user services
• Support desktops, notebooks, printers and other hardware components.
• Minimum 3 years of IT (EUC) relevant experience in Apple products, applications and networks.

Contract Type: 12 Months (Renewal)
Salary: SGD2,800 to SGD3,500
Location: East Coast, Punggol
Working Hours:
i. Mon – Fri 8:30 am to 4:30 pm (onsite), Sat 9:00 am to 1:00 pm. (onsite)
ii. Mon – Fri 10:00 am to 7:00 pm (onsite)
Commencement: Immediate

Job Types: Full-time, Contract

Contract length: 12 months

Salary: $2,800.00 - $3,500.00 per month

Schedule:

• Monday to Friday

Work Location: In person

Responsibilities:

• Perform troubleshooting, assist in investigation and resolving production issues
• Identify and implement continuous process improvement and cost control initiatives
• Trending for process parameters
• Manage capability setup for new equipment and processes
• Carry out tolling review and control and submission of capability declaration
• Handle proper documentation for publication review, worksheet amendments and in-house specifications amendments
• Provide technical support to Operations, ensuring productivity efficiency
• Review, investigate and provide solutions to issues raised by Operation
• Carry out training on repair processes and any other related practices

Requirements:

• Degree or equivalent, preferably with experiences in propulsion engines and components MRO facility
• Ability to interpret engineering drawings
• Prior experience in repair processes will be an added advantage
• Familiar with NDT requirements and FAA 45 /EASA 145 regulations

Position title : Manager

Location: East

Salary : $6,000-$7,000

Interested applicants can also send your resume to

WA:+65 8151 4682 (Ms Angel) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Responsibilities:

• To oversee and review company's operational activities and identify process improvements via process development and automation

• To develop and lead a robust and effective Engineering team that offers full technical support to the operation while adhering to fulfill production demand and regulation compliance

• To develop and lead Engineering teams to achieve Technical, Equipment Engineering, Process and Engineering Design, Research and Development and Facilities and Safety excellence

• To ensure process control is established and to manage capital and project status in order to establish an efficient process performance and maximize returns on capital equipment

• To ensure technical team execute improvement plan and deliver saving or output in order to meet the project timeline and commitment

• To establish a technical and equipment engineering support team in order to provide world class solutions to customers

• To review operational activities and identify process improvements in order to deliver significant productivity and quality improvements

• To provide leadership to Technical, Equipment, Process Engineers, Work Safety in order to provide process development and world class technical support to operations

• To be responsible for Work Safety and Health for all production process and equipments and to ensure that all process and equipments are operated with safety protection in order to eliminate all hazardous elements that pose a threat to the safety of the production operators and engineers

• To develop a strategy for creating a robust and effective Technical services in order to have an effective and world class preventive maintenance plan

• To create teamwork environment in order to have a great team member with high technical skill across the department

• To lead and be responsible in-house machines/automation machines and software development including concept, design and budgeting, testing and running and upgrading in order to meet production requirement and development

Requirements:

• Minimum Bachelor Degree or Advanced Diploma in an Engineering Discipline

• Experience in automation machine design, PLC programming, hands-on experience in machining including CNC, conventional milling, lathe and grinding machine

• Knowledge of chemical controlled processes, risk hazard studies for chemical/medical device manufacturing company

• Knowledge of legal safety regulations for installation of heavy capital equipments and activity permits for medical device manufacturing company

• Knowledge in design, basic and detailed engineering and project management

• Proficient in Solidwork design

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

Site Engineer

Work Location: Changi Naval Base

Working days: 6 days 8am to 5pm

Salary: $3000 and above (depends on experience)

(26 months project contract)

Requirements

• Degree in Civil & Engineering or equivalent, recognized universities under the BCA.
• Experience in a marine construction company is favourable, however, entry level may apply.
• Proficient in Microsoft Office, MS Project, and AutoCAD

Job scope

• Carry out project planning, Scheduling, cost control, good documentation system and project management
• Control and Monitor Work progress and Ensure Work Quality
• Ensure Timely & Smooth Progress of Works
• To solve technical problems pertaining to field works
• Liaise with government/Statutory Authorities, consultants, clients, suppliers
• Generate reports for superiors
• Attending site meetings, inspections and Housekeeping of sites
• Ensure traceability to material, processes and equipment
• Detect Project problems and ensure effective corrective measures are executed
• Other Ad-hoc Duties required to carry out

Lim Jun Yao

Reg No: R1989028

The Supreme HR Advisory Pte Ltd

EA No: 14C7279

QAQC Engineer

Work Location: Changi Naval Base

Working days: 6 days 8am to 5pm

Salary: Above $3000 (depends on experience)

(26 Months Project Contract)

Requirements

• Min. Degree in Civil and/or Construction Engineering
• Able to read basic structural drawings.
• Preferably 2 year(s) of working experience
• Experience in PPVC & PBU projects are added advantage.

Job scope

• To coordinate and execute all QC procedures, documentations, and records.
• Checking that the assembly or production line comply to standards and procedures.
• To perform daily post-pour and pre-delivery inspections before delivery of components.
• Report non-conformance to Manager for immediate action.
• Collaborate with planner to develop daily, weekly and monthly delivery plans.
• Monitor subcontractors to ensure delivery is carried out as per scheduled.
• To arrange storage of product.
• Carry out monthly stock take as when required.
• Keep records of inspection and before/after repair of defect products.
• Arrange for testing of raw materials such as rebar, aggregate, cement and precision tools.
• To lead internal and external QA audits (ISO9001)
• Well versed in HDB, BCA, SCI requirements.
• To work with design team on technical issues and subcontractor on quality issues
• Take initiative to resolve quality issues of delivered product as highlighted by clients.
• Coordinate closely with client representative such as RE, ARE and RTO.
• Engage with production team to deliver high quality works.
• Prepare a monthly analysis and report to management with recommendations for improvement and preventive measures.
• Other ad-hoc duties as assigned by superior.

Lim Jun Yao

Reg No: R1989028

The Supreme HR Advisory Pte Ltd

EA No: 14C7279

Our client is a Global MNC, one of the leading players in the Manufacturing sector. Due to business needs, they are now recruiting a Mechanical Engineer to be part of their team for ongoing transformation projects. They are located in the West – easily accessible.

Responsibilities:

• Develop strategies on preventive maintenance procedures for the upkeep of company’s plant equipment
• Assist in scheduling the necessary maintenance for company’s production equipment
• Analyze equipment breakdowns, troubleshoot issues, and coordinate any urgent repairs required
• Collaborate with the company’s various engineers to optimize equipment performance and prolong its lifespan
• Monitor and manage maintenance expenditures, overseeing budgets for the company’s equipment enhancements/replacements
• Provide guidance/training to junior staff on equipment and maintenance operations
• Contribute to project planning/execution for equipment installations or upgrades, coordinating the necessary resources and materials
• Assist in the necessary equipment qualification/validation processes for company’s new projects, including walkdowns, commissioning, and qualification activities
• Draft job aids, standard operating procedures (SOPs), and conduct root cause analysis and equipment reliability investigations when required
• Supervise and liaise with various external stakeholders for the company’s projects
• All other adhoc duties as assigned

Requirements:

• Minimum Diploma in Mechanical Engineering or other relevant field of studies
• Minimum 5 years of relevant working experience in a plant environment

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Job Duties:

• Deploy and configure solutions in the cloud.

• Automate cloud operations, develop infrastructure automation scripts and participates in the continuous improvement of cloud solutions.

• Participate in the specification, setup and run Proof of Concepts and demonstrations of cloud solutions.

• Administer and maintain servers across virtual platforms.

Job Requirements:

• Bachelor’s degree in computer science, Information Technology, or a related field.

• Must have experience in cloud operations, SRE, or a related role.

• Proficiency in cloud platforms such as AWS, Azure.

• Certification in cloud platforms (e.g. AWS Certified DevOps Engineer, Azure DevOps Engineer Expert).

• Experience with containerization and orchestration tools (e.g. Docker, Kubernetes).

• Knowledge of infrastructure monitoring and logging tools (e.g. Prometheus, Grafana. ELK stack).

• Strong scripting and programming skills (e.g. Python, Bash, Go).

• Familiarity with CI/CD pipelines and automation tools (e.g. Jenkins, GitLab CI/CD).

• Experience with GCC (Govt on Commercial Cloud).

• Excellent problem-solving and communication skills.

• Ability to work collaboratively in a cross-functional and fast-paced environment.

Our client, one of Singapore's leading smart warehousing which involves intelligent warehouse automation solutions that leverage autonomous technology, is looking out for talents for the position of Field Engineer.

Job Responsibilities

• Commissioning of AGV at customer sites which includes on-site user acceptance tests
• Ensure the performance and reliability AGVs, network and customer site infrastructure.
• Provide high level troubleshooting to resolve issues that are beyond the capabilities of our first level support services from field technicians.
• Monitor the health and operations of AGVs and proactively engage to resolve faults.
• Respond and provide technical guidance to customers regarding operational issues, software updates and general maintenance.
• Maintain up-to-date records of AGV and site configurations (software and hardware configurations).
• Communicate and collaborate with our global engineering teams, contributing to the development of instrumentation and automation for monitoring, detection, and self-healing of failures.
• Contribute to the creation of user manuals, customer guides, FAQs, application notes and best practices.
• Contribute to the design and creation of AGV missions using proprietary mission description language.
• Provide on pre-sales technical assessments.
• Infrastructure includes reflective markers and networking equipment.
• Participate in Proof of Concept (demonstrations) with demo AGVs.
• Ensure strong relationships with all customer representatives.

Job Requirements

• At least a Diploma with experience in a technical field (including EE, ME, CS, Robotics)
• Preferably possess 3 years of relevant working experience
• Ability to focus and drive issues to closure in a fast-paced, agile environment.
• Possess strong communication and people skills, and with customer-centric mindset.
• Experience with Linux (ideally Ubuntu) administration, tools and Bash/ Python scripting.
• Ability to troubleshoot and resolve device and system-level problems in Linux.
• Experience with firewalls, VPN and network security technologies will be an added advantage
• Working knowledge of SSH, DNS and other network protocols will be highly preferred
• Strong team player
• Experience with ROS command line and graphical tools will be advantageous

Your recruiter for this job: WhatsApp Ian @ 8512 3517 for a quicker response.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Our Client is one of the Top 10 Fortune 500 MNC in the Oil and Gas industry.

Scope of Work

· The Mechanical Static Engineer is a part of the MMI (Mechanical, Material and Integrity) team in the Engineering division of the Manufacturing Site

· Provide day-to-day specialist mechanical engineering support, e.g., piping standards, Storage Facilities, Fired Equipment and Pressure vessel issues, for the Production Unit to deliver the Refinery Business Objectives.

· Develop, Lead Implementation and Maintains the Client’s Engineering Practices on Static Equipment and ensures full compliance of mechanical engineering practices with statutory obligations, Engineering Codes of Practices and DEP standards.

· Focal point for developing / updating mechanical engineering policies and guidelines. Develop and Maintain Static Equipment Maintenance procedures. Assume Leader role in implementation of new procedure.

· Provide mechanical engineering inputs for new Capital/Revamp Projects during the Pre-FEED phase of project (i.e. Select phase) or act as Champion to develop the scope of new Capital/Revamp Projects..

· Provide asset owner PUDT with mechanical engineering support to deliver the Refinery Business Objectives.

· Lead and facilitate in Causal Learning Investigation/Root Cause Analysis of major/complex equipment/system problems and provide recommendations to ensure the reliability of these equipment.

· Develop and lead implementation of Asset Master Plan for the Refinery including ECC and utilities units.

· Make proactive contributions for improvement of the maintenance or plant reliability to Production Unit Managers in ensuring technical integrity of the assets, lead and championing reliability improvement programs in the refinery.

· Drive sustainable development and reliable execution of Bukom Total Flange Assurance program. SME for the site TFA process and procedure.

· Develops comprehensive discipline scope for TA and SD scheduled for assigned unit. Provides mechanical support during TA and conduct technical post-mortem reviews of TA execution.

· Lead search and implementation of new technologies, methods and tools to assure safe and productive execution of maintenance tasks.

· Perform Engineering Design verification for existing equipment such as vessels, columns, tanks and heat exchanges using PV Elite, Code Calc, Tank and Disasu software.

· Provide FFS assessment services for static equipment or piping as per API 579 where required. Provide FFS training to young Mechanical Engineers within the team.

· Review and approve the mechanical design of Engineered Clamps for temporary repairs.

· To identify the bad actors and potential threats in static equipment and piping across the site with the support of Operations / Maintenance / Technology teams to arrive with mitigations plan.

· Evaluate technical acceptance of deviation/derogation of mechanical items before it is passed to higher Technical Authority for approval.

Requirements

At least 5 years of professional experience delivering or supporting asset integrity work in assets including but not limited to:

• Field Engineering / Construction- / Asset- Support

• Equipment Integrity & Fitness for Service

• Investigation of Equipment / Piping Failure

• Static Equipment Engineering Standards and Best Practices

• Develop, design, specify and evaluate pressure vessels, heat exchangers and other process equipment

• Degradation and Corrosion Control System Design and Management

• Asset Integrity Management and Repair Assessments

• Non-Destructive Testing (NDT)

• Field Inspection

• Investigation of Equipment Failure

If you are keen to know more about this role, please email Mary at [email protected] and send your resume in MS Word format. Note that only shortlisted candidates will be contacted.

By sending us your personal data, you are deemed to consent to RMA Consultants Pte Ltd and its affiliates collecting, using and disclosing your personal data for the purposes set out in our Data Protection Policy at http://bit.ly/3GHgskn and Privacy Policy at http://bit.ly/3W63rp7

Mary Marquez (EA Regn No: R1326974)

RMA Consultants Pte Ltd (EA Licence No: 93C4403)

Essential Duties & Responsibilities: 

Mechanical Design and System Integration: Lead the mechanical design of UPW and

wastewater treatment systems, including the selection and sizing of equipment such as

process vessels, pumps, compressors, heat exchangers, dewatering devices, and other

mechanical components. Ensure seamless integration of these components into the overall

treatment system.

 Equipment Specification and Procurement: Prepare technical specifications for mechanical

equipment and work with vendors to procure the required components. Evaluate equipment

proposals and make recommendations based on technical and budgetary considerations.

 Project Planning and Execution: Collaborate with project managers and other engineering

disciplines to plan and execute UPW and wastewater treatment projects. Participate in project

meetings, design reviews, and progress assessments to ensure project objectives are met.

 Mechanical Engineering Analysis: Perform engineering calculations, simulations, and

modeling to assess the performance and reliability of mechanical systems. Address technical

challenges and propose solutions to optimize system performance.

 Quality Control and Compliance: Ensure that all mechanical designs and installations comply

with applicable codes, standards, and industry best practices. Conduct quality control reviews

to verify design integrity and safety.

 Cost Estimation and Budget Management: Collaborate with the project team to prepare cost

estimates for mechanical components and equipment. Identify cost-saving opportunities

where applicable.

Skills & Experiences required:

 Bachelor’s degree in mechanical engineering or a related field.

 Significant experience (typically 10+ years) in mechanical engineering with expertise in water

and/or wastewater treatment systems.

 Proficiency in mechanical design software and engineering analysis tools.

 Strong understanding of various mechanical components and equipment used in water and/or

wastewater treatment systems.

 The ability to handle multiple tasks and priorities.

 Excellent communication and collaboration skills to work effectively within cross-functional

teams.

Responsibilities:

• Attending site meetings with consultants;
• Study of Construction drawings details and coordinate with the consultants and sub-contractors to resolve any technical / site issues;
• Ensuring that works on site are carried out according to specifications / drawings;
• Inform Project Director or Project Manager on any technical / site problems arising;
• Supervising the progress of work on site;
• Reporting work progress to the necessary party;
• Coordination of sub-contractor’s work and ensuring that the work on site is on schedule.

Benefits:

• Performance bonus
• Company incentive trip
• Annual salary review

Requirements:

• At least a Bachelor's Degree in Civil Engineering or equivalent. A degree recognised by PE Board is an advantage;
• At least 3 years of relevant working experience;
• Working experience for A&A works will be an advantage;
• Project site is located at AMK;
• Offer subject to experience and qualification.

Overview: -

• Jurong Island -Transport Provided: Jurong East/Lakeside MRT
• Basic Salary: $3000 to $5000 + AWS
• 5 Working days - 8.00am to 4:45pm
• ジュロン島 - 交通手段提供：ジュロン
• イースト/レイクサイドMRT 基本給与：$3000 〜 $5000 + AWS
• 週5日勤務 - 午前8時から午後4時45分

Your Responsibilities: -

• Improve communication with Japanese vendors for design reviews, project management, vendor oversight, engineering standards, and support for spare parts and maintenance.
• Facilitate communication between the client and vendors, coordinating equipment meetings, preparing materials, and negotiating new equipment/parts purchases from Japanese vendors.
• Audit Japanese vendors, arrange schedules, and facilitate information exchange between vendors and the client.
• Schedule and lead design review meetings, prepare materials, and create documents for approval.
• Communicate with vendors, control project budgets, ensure quality, safety, and schedule adherence. Collaborate for equipment handover checklists.
• Qualify new vendors, conduct audits for existing ones, and compare for quality and cost control.
• Translate UMTES into English, create USPES based on requirements, and share with relevant sections. Provide training.
• Propose equipment and process modifications for improvement. Coordinate with vendors and assess modification results.
• Support spare parts management and maintenance by coordinating purchases, helping resolve equipment problems, and providing training for troubleshooting.

• 日本のベンダーとのコミュニケーションを向上させ、デザインレビュー、プロジェクト管理、ベンダーの監視、エンジニアリングスタンダード、および予備部品とメンテナンスのサポートに対応します。
• 顧客とベンダー間のコミュニケーションを促進し、機器会議の調整、資料の準備、および日本のベンダーからの新しい機器/部品の購入交渉をします。
• 日本のベンダーを対象に監査を実施し、スケジュールの調整、ベンダーとクライアント間の情報交換をサポートします。
• デザインレビュー会議のスケジュール調整、資料の準備、および承認のための文書の作成を担当します。
• ベンダーとのコミュニケーションを行い、プロジェクト予算の管理、品質、安全性、スケジュールの順守を確認します。
• 機器引き渡しのチェックリストの作成に協力します。
• 新しいベンダーを認定し、既存のベンダーに対する監査を実施し、品質とコストの管理を比較します。
• UMTESを英語に翻訳し、要件に基づいてUSPESを作成し、関連セクションと共有します。トレーニングを提供します。改善のための機器およびプロセスの修正を提案し、ベンダーと調整し、修正結果を評価します。
• 予備部品の管理とメンテナンスをサポートし、購入の調整、機器の問題の解決、トラブルシューティングのトレーニングを提供します。

You will need: -

• Experience studying or working in Japan, demonstrating a solid understanding of Japanese working culture.
• Fluency in Japanese is necessary for communicating with our vendors in Japan.
• Diploma/Degree in Automation, Electrical Engineering, Mechanical Engineering, Chemical Engineering or equivalent
• 2-5 years of relevant working experience

• 日本での学習または仕事の経験があり、日本の労働文化に理解があることを示します。
• 日本のベンダーとのコミュニケーションには、日本語の流暢さが必要です。
• 自動化、電気工学、機械工学、化学工学または同等の分野でのディプロマ/学位を有しています。
• 関連する実務経験が2〜5年あります。

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Responsibilities:

• Applying Building Regulations to architectural design;
• Coordinating, organising and preparing construction and architectural documents and drawings;
• Submit & update status of drawings and materials as well as supervise work progress;
• Supervise architectural works, and coordinate with the sub-contractors and clients on matters of building construction and to ensure the architectural workmanship standards;
• Liaise closely with consultants and sub-contractors.

Benefits:

• Performance bonus
• Company incentive trip
• Annual salary review

Requirements:

• Possess Bachelor’s Degree in Electrical Engineering. A degree recognised by PE Board will be an advantage;
• At least 3 years of relevant working experience;
• Working experience for A&A works will be an advantage;
• Project site is located at AMK;
• Offer subject to experience and qualification.

The Job
To support QC operations. Responsible for ensuring a product or service meets the established standards of quality.
Any other ad-hoc duties assigned.

Requirement

Diploma in Mechanical Engineering / Mechatronics Engineering

Full Training Provided

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )