Total 3,783 Junior Executive level Engineering job vacancies

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Thoroughly observe SPC parameters and control charts.
• Implement measures to enhance tool capability performance.
• Investigate quality issues and conduct initial troubleshooting.
• Escalate unresolved problems to the Supervisor and Technology Engineers.
• Manage the dispatch of products to the tool.

Requirements:

• Diploma in engineering or equivalent.
• 2 years of working experience in the related field.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Responsibilities:

• Work as part of a maintenance team ensuring fleet availability for client
• Manage planned maintenance activities
• Conduct troubleshooting of systems onboard vessels
• Supervise and guide workers in mainenance tasks
• Coordinate with suppliers , contractors when required
• Coordinate with Owner Rep on issues pertaining to maintenance task
• Any tasks as directed by Site Manager

Requirements:

• Diploma or NTC in Mechanical or Marine Engineering or related
• Possess knowledge in Mechanical, Engines and Electrical principles
• Able to communicate effectively with internal and external stakeholders
• Able to work during weekends and public holidays and on odd-hours
• Willing to work in Brani area, with company transport provided

Other Information:

• Official Work Hours: 7am - 5pm
• 5 Days Week
• Company Transport provided to Gul

Nanyang Technological University (NTU) is an internationally renowned tertiary education institution. It boasts a strong engineering college and is ranked among the best globally. Committed to our mission of educating leaders and advancing knowledge for Singapore and beyond, we have built global programs and established strong links with leading institutions around the world.

The School of Civil and Environmental Engineering (CEE), which is under the College of Engineering, aspires to be a leading school for Sustainable Urban Systems. Currently, it has over 50 faculty members and more than 1,500 students, and is rapidly expanding its range of educational and research activities. Its faculty has led major university-wide strategic research thrusts in space creation, water research and sustainable built environment. Moving forward, CEE is addressing critical problems in urban systems such as building structures and energy systems, sustainability of urban cities, and resiliency to natural and unnatural risks.

To fuel further development, we invite applications for an Assistant Professor (Tenure-Track) position in Structural Engineering.

Applicants must have a PhD degree in Civil Engineering or Structural Engineering. Specifically, the applicant must be able to teach mechanics of materials, determinate and indeterminate structural analysis, structural design in either reinforced and precast concrete, and/or steel and composite structures, and tall building structures at both the undergraduate and graduate levels and is expected to enhance the school’s exiting curriculum.

Application Procedures

Applicants are invited to submit their applications (cover letter, detailed CV including publication list, research and teaching statements, citation report, and/or any other documents that demonstrate your qualifications and credentials) through the NTU Workday career portal.

Application remains open until the position is filled. Only short-listed candidates will be notified.

The Singapore University of Technology and Design (SUTD) has topped the list of emerging engineering schools (MIT report, 2018) and possesses a unique structure and mission within the vibrant nation of Singapore. SUTD features the integration of design with engineering, an intimate student to faculty ratio, an innovative active learning pedagogy, an interdisciplinary pillar organization, a stellar faculty, and a beautiful new campus. The Engineering Systems and Design (ESD) pillar within SUTD offers exceptional undergraduate and doctoral degrees with focus on Business Analytics and Operations Research, Financial Services, Supply Chain and Logistics, and Aviation Systems. ESD undergraduates are prepared for a wide range of engineering and management careers in private and public sectors, including healthcare, banking, manufacturing, supply-chain, energy, transportation, and entertainment and hospitality. They are equally adept at entrepreneurship and boldly initiating start-up ventures.

Job Requirements for Tenure-track/ Tenured Faculty

We seek to fill positions in several areas including but not restricted to statistical and machine learning (ML), artificial intelligence (AI), operations research, data science, and industrial and systems engineering, with applications to healthcare, sustainability, supply chains and logistics, urban mobility, and quantitative finance.

The successful candidates will have earned or be nearing completion of a doctorate in an engineering systems-related field and have solid grounding in one or more systems methodologies including, but not limited to, AI/ML, optimization, stochastic modelling, statistics, game theory, financial engineering, and simulation. Empirical, experimental, computational, and analytical research approaches are all welcome. Candidates must be committed to excellence in teaching at the undergraduate and graduate levels and to developing and maintaining an active research program.

Successful candidates can look forward to competitive remuneration, assistance for relocation to Singapore, and attractive research start-up packages through SUTD Kickstarter Initiative (SKI) and grant opportunities.

A candidate’s full application package should include:

1. A cover letter

2. Curriculum Vitae (CV), including publications

3. Research statement / plans

4. Teaching statement / plans

5. 3 representative research papers

6. Contact information of 3 referees

Interested and qualified candidates should apply online via https://careers.sutd.edu.sg/job/Singapore-Faculty-Position-Tenure-TrackTenured-%28Engineering-Systems-and-Design%29-138682/13958844/

Responsibilities

• Daily routine testing of parameters for wastewater treatment plant (WWTP), which includes testing
• for PH, Chemical Oxygen Demand (COD) cell test, Conductivity, VOC & H2S, Fluoride, Chloride,
• Phosphate & Sulphate content using an Inductively coupled plasma mass spectrometry (ICP-MS),
• Cyanide, Phenol and Total Dissolved solids (TDS) from the various tanks in the plant.
• Presented and implemented a new Third-party water test standard form for lab technicians to use,
• that significantly reduced the amount of errors and risks of missing out a critical test when reporting
• to the National Environmental Agency (NEA).
• Conducted Daily maintenance and calibration for instruments and equipment throughout the lab.

Requirements

• Min Nitec in Mechanical/Chemical/Chemistry Engineering
• Min 2 years experience in Manufacturing/Semicon Company
• Strong experience in Waste Water/ Ultra Pure Water Systems

Interested candidates who wish to apply for the advertised position, please APPLY with an updated

copy of your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we

may collect, use or disclose your personal information for purpose in connection with the services

provided by us.

Responsibilities

• Responsible for providing support on maintenance project.
• Responsible for handling system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.

Requirements

• Min Diploma in Electrical/Electronic Engineering, Computer Science/ Information Technology or equivalent.
• Min 2 years of working experience in managing LAN / WAN / Routers / Switches / DNS / Firewall and Milestone System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

JOB DESCRIPTION

• Responsible for plan, schedule and execute all system backend (Hardware & Software) and ensuring successful and timely completion of the projects
• Maintenance activities
• Troubleshoot and fix adhoc system & network faults
• Conduct regular maintenance activities such a system inspection/monitoring, system backup, disk space monitoring and housekeeping, patching and upgrading of various software and Operating systems.
• Handle related software projects and processes.
• Analyze customer function, hardware design or system design requirements and create or update software requirement specification accordingly
• Liaise with various sub-vendors in the delivery and work to be carried out to ensure that all are in accordance with the agreed schedule
• Knowledge of setting up a service monitoring system is preferred.
• Prepare maintenance related documents such as maintenance reports, incident reports , etc.

REQUIREMENTS

• Degree in Computer Engineering, Mechanical & Electrical Engineering, Civil Engineering, Information Systems or equivalent
• Minimum 3 years of relevant experience
• Knowledge in networking technologies and ability to configure/maintain network equipment
• Experienced in Windows system administration
• Good communication skills both verbal and written for English
• Team player and willing to learn
• Able to work independently
• Ability to multi-task and good time management skills
• MS SQL database experience
• Provide good rapport and support to customers
• Assist to prepare documents on delivery of goods etc.

Assistant Engineer Responsibilities:

• Collaborating with other engineers and workers to design, install, testing and commissioning electrical busduct systems.
• Performing regular inspections of electrical equipment and scheduling maintenance or repairs.
• Performing simple on-site troubleshooting
• Implement work plan, risk assessment and safe work place procedures.
• Inspecting inventory and reporting inconsistencies as well as ordering more materials.
• Participating in various learning experiences, which may include attending workshops and training sessions.

Assistant Engineer Requirements:

• A diploma/degree in the relevant engineering discipline.
• CAD skill preferred but not a must.
• Ability to follow instructions and to collaborate with others.

Job Scope:

• Customer support for Domestic as well as regional
• To arrange service visiting, install, repair, troubleshooting, and re-location on site
• To set up and dismantle equipment for demonstrations
• To conduct equipment familiarization training for users
• To answer service enquiries
• To attend user’s meetings
• To install and commission new equipment at customer’s sites
• To practice and enlightenment for Customers satisfaction in service team
• To prepare service quotations, contracts, report, and invoice
• To arrange spare parts from suppliers and send repair items and spare parts

Job Requirement:

• Min. NITEC/ Diploma in engineering/ any relevant field
• Min. 1 yr relevant experience in service engineer preferably with medical device

For interested applicants, please send your updated resume to: [email protected]

All candidates’ information will be treated with the strictest confidence

Melissa Zhang Zhiqi (Mezzo)

R2197564

Recruit Express Pte Ltd

99C4599

Job Responsibilities:

· Handle full sets of Accounts, and prepare relevant schedule and reports to be ready for Audit.

· Timely data entry to the accounting system and preparation of reports

· Reconcile accounting records and bank records

· Prepare Invoices and debt collection

· Check and follow up with payment matters

· Liaison with Clients and suppliers and vendors, external Auditors and Tax Agents

· Prepare and file GST returns

· Submit survey reports required by government

· Provide other supporting functions to the Finance Division and Company

· Prepare fortnightly payroll from collection of data to arranging payment to staff.

· Assist on budget and forecasting exercises

· Handles staff attendance, leave updating

· Knowledge of Employment Act

· Any other ad hoc assignments

Requirements:

· Minimum Diploma in Accountancy or Accounting related qualifications

· Min. 1 year relevant working experience in Accounting is preferred

· Proactive, committed and able to work in fast paced, high volume processing working environments

· Positive attitude, hardworking, possess initiative & ability to work independently

· Computer literacy in Microsoft Excel & Microsoft Words.

· Ability to organize and manage multiple priorities and able to meet deadlines

· Meticulous and detailed oriented, good filing system

· Possess and inquisitive and analytical mind and proactive in problem finding and resourceful in problem solving

· Excellent inter-personal skills, problem solving skills and a team player

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]

Job Purpose

To carry out/ perform Electrical, Mechanical and Fire (EMF) line maintenance activities, investigate incident/ accidents, carry out checks to ensure safety aspects are met and guarantee quality assurance for overall achievement of maintenance requirements in compliance to SMRT Quality objective as stated in the Quality Procedures (QP)/ Work Instructions (WI)/ Tasklists.

Responsibilities

• To lead and manage a team of Technical Officers (TO) to carry out preventive maintenance (PM) and corrective maintenance (CM) works on EMF equipment and system in compliance with SMRT Quality and Safety procedures and requirement.
• To plan team maintenance work schedule and execute the scheduled PM/ CM works according to team manpower in most effective and efficient manner.
• To supervise all repairs and upgrading works carried out by minor work term contractor.
• To attend faults as reported by Operations Command Centre (OCC) for EMF equipment.
• To manage and ensure that the EMF system are properly maintained and keep it in state of good and operational condition.
• To conduct briefing and tool box meeting before team members start their shift work.
• To supervise and ensure that the team TOs carry out their duties and responsibilities safely and efficiently.
• To provide technical advice, information and instructions to team TOs and other staffs, and ensure all drawings, diagrams, manuals, PM and CM records are kept current and updated.
• To assist Engineering Maintenance Manager (EMM) in conducting engineering and safety analysis, investigations, and testing.
• Carry out and/ or assist EMM in supervision of corrective maintenance, upgrading, modification work and major repair work carryout by upgrading contractors/ Land Transport Authority (LTA)/ Developer interface works as assigned by EMM. Prepare and submit reports on completion of work.
• To comply and exercise safety at all times in accordance to Safety Procedures and conduct monthly team safety talk to team staffs.
• To perform rotating shift duties.
• To perform driving duty.
• To ensure compliance with our Quality objective as stated in our QP/ WIs/ Tasklists in daily activities.
• To undertake any other tasks or functions that are incidental or ancillary to the performance of assigned work.
• To be responsible for the review and update of Task lists to ensure that all requirements for the work are met.
• To carry out investigation, report accident/incident and submit the report together with a proposed preventive action to avoid future recurrence.
• To comply with the Financial Procedures for Purchase Requisitions and Work Services, replacement and condemnation of fixed assets.
• To coordinate with LTA on the maintenance aspects for EMF equipment and review/comment the equipment, design, drawings and manuals submission for ongoing Thomson East Coast Line Project.
• To conduct site interactive audit session with new staff on safe isolation procedures and operation of EMF equipment.

Job Description:

• Provide technical support for manufacturing operations
• Conduct process validation
• Perform maintenance, troubleshooting and calibration on Machines / Equipment
• Co-ordinate with supervisor / leader on production schedule / audit / stock take etc.
• Any other tasks assigned by superior by time to time.

Job Requirement:

• Have to be comfortable to work in clean room
• Fresh diploma Electrical / Mechanical Engineering

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Job Purpose

The Assistant Engineer’s job scope shall include leading a team of Technical Officer(s) to perform Preventive Maintenance (PM), Corrective Maintenance (CM), Overhaul (OH) and Engineering Support (ES) on all SMRT Thomson-East Coast Line (STEL) Trains, Depot and Workshop equipment so as to provide a safe, reliable and comfortable journey for our commuters.

Responsibilities

• Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.
• Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.
• Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.
• Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.
• Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.
• Ensure spares, tools and equipment used are in good condition and calibrated if necessary.
• Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.
• Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System
• Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.
• Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.
• Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.
• To support the group during incidents, accidents and emergencies.
• Ensure excellent housekeeping are maintained within all work areas.
• Maintain a high level of work discipline and standards.
• Perform any other task as assigned.

Qualifications & Work Experience

• Diploma in Electrical, Mechanical or Mechatronics Technology/ Engineering from a recognized institution.
• Preferably 5 year’s relevant experience in the railway environment.

Job Purpose

1. Overall in charge for all Planned Preventive Maintenance as well as Corrective

Maintenance works related to Track, Track Foundation, Trackbed and 3rd Rail System in

SMRT

2. Ensure all Line Maintenance works (PM & CM) are complied with approved quality

procedure, work instruction ( ISO 9002 Standard)

3. To achieve and maintain Key Performance Indicator set by Permanent Way Management.

Responsibilities

1. Responsible for all staff’s welfare, attendance, disciplinary matters, safety and maintenance

work matters.

2. To submit weekly maintenance programme to LM.

3. To prepare monthly report on team man-hours

4. To upkeep and maintain the office.

5. To coordinate with Chief Controller on all fault reports and arrange for proper deployment

to execute the work.

6. To plan out all Correction & Preventive Maintenance works and ensure it is carried out

promptly and comply to approved quality procedure and WIs.

7. To check, compile Daily Work Record submit by staff.

8. To conduct and brief staff on Toolbox briefing

9. To carry out project implementation as and when assigned by supervisor.

10. To perform PIC & PM roles.

11. To attend to Emergency work when call by Supervisor.

12. To assist LM on Track Quality report by :

- Reviewing and verify patrol reports.

- Assist with fault card

- Monitor and priorities assessment of track defect and quality.

- Input work request into Pway CM list.

- Monitor & coordinate work done in Pway CM list.

Job Requirements

1. Higher NITEC / NITEC / NTC preferably in Mechanical Engineering.

2. Preferably 3 years relevant working experience in technical work. Fresh graduates are welcome to apply.

Skills

1. Ability to work under pressure.

2. Self-motivated, resourceful and organized.

3. Able to work independently.

4. Possess strong interpersonal & communication skills.

5. Ability to communicate effectively in English, and work safely in a team with reference to the respective

6. Risk Assessments.

7. Experienced and confident in managing contractors.

Duties and Responsibilities

1. Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.

2. Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.

3. Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

4. Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

5. Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

6. Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

7. Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

8. Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System

9. Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

10. Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

11. Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

12. To support the group during incidents, accidents and emergencies.

13. Ensure excellent housekeeping are maintained within all work areas.

14. Maintain a high level of work discipline and standards.

15. Perform any other task as assigned.

The duties of the Assistant Engineer include completing all tasks assigned by management, safely operating equipment, and working alongside other engineers in the planning, design, development, and evaluation stages of projects. You should be able to diagnose problems and follow instructions in fast-paced environments.

To be successful as an assistant engineer, you should be passionate about your engineering discipline and demonstrate strong logical and critical thinking skills. Outstanding candidates are able to keep track of project expenses, write detailed reports, and ensure consistent quality assurance standards.

Key Responsibilities

1. Understanding and carrying out all tasks given by the management。

2. Collaborating with other engineers and workers to design, develop, test, and improve products and engineering processes.

3. Ensuring all expenses stay within the allocated budget.

4. Performing regular inspections of equipment and scheduling maintenance or repairs.

5. Providing assistance to different staff or engineering teams.

6. Inspecting inventory and reporting inconsistencies as well as ordering more materials.

7. Producing CAD drawings according to specifications.

8. Evaluating all products and processes and ensuring standardization of quality assurance measures.

9. Calibrating and troubleshooting equipment as required.

Requirements

1. Diploma, equivalent or higher in Mechanical or Chemical Engineering

2. With relevant past work experience in engineering design environment and with manufacturing processes such as machining, welding, assembly and testing is an advantage, fresh graduated also welcome

3. Proven experience using CAD software; knowledge of SolidWorks is a plus

4. Proficient in MS office applications (excel, word, powerpoint)

5. Organization skills and detail-oriented personality

6. Willingness to learn and good team player

7. Excellent in English verbal and written communication skills

8. Proactive, meticulous, and high energy, with good time management

Salary (commensurate with experience): S$2600 – S$ 3600

Interested applicants, kindly forward your detailed resume indicating

· earliest availability

· notice period required

· current & expected salary and email to: [email protected]

We regret that only shortlisted candidates will be notified.

Permanent. Yio chu kang . 5days with standy by ( Rotating schedule)

Our client:

A profitable company specialised in clicnical communication solution

Product

Nurse call system, Enterprise Reporting, Analytic tools, In house n 3rd party software applications.

Years in Business

30 years

Area of business

Global

Job scope

· Project management and site visit.

· Work with sub-contractors, engineers in order to fulfil clients’ technical requirement

· To provide onsite support for testing and commissioning

· To be in charge of preventive and corrective maintenance in accordance with co SOP

· Ad hoc emergency support after normal hour with overtime rate of 1.5

· 24/7 stand by on rotational schedule

Requirement

· Min ITE diploma in electrical/electronic / IT Engineering

· Proficient in AutoCAD and tender drawing

· Able to work in bilingual work environment

Added advantage:

• Experience in site work bn able to project manage.
• Familiar with Installation and commissioning of devices for Electronic Low Voltage (ELV) systems (examples: CCTV, Alarm System Intercom, Real time location (RTL) system.)

Whats on offer

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment

Please submit resumes to michelle@recruitmentalliance.sg with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Michelle Goh

EA License No : 22C1142

We regret that only shortlisted candidates will be notified.

Responsibilities & Duties

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issue.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

5days, permanent, Yio Chu Kang

Our client:

Original equipment manufacturer (OEM) and of automated testing equipment (ATE) and system integrator of industrial automation solution.

Job description:

· To conceptualise and design for standard and customized automation equipment such as material handling, process automation, fixturing, and tooling.

· To generate detailed CAD design and drawing using Autodesk Inventor or equivalent and release of the design documentation

· To perform tolerance, stack up analyses on critical design parameters on the quality of the development project.

· Project manage and cross department collaboration for DFM and DFA

· Hands on in prototype assembly, testing, and qualification inclusive of troubleshooting.

Requirement:

· Diploma up in Mechanical/Mechatronics Engineering.

.2 years experience in mechanical design automated machine

· Familiar with components sizing of pneumatics and motion components such as servo motors and mechanical drive components.

· Experience in Design for Manufacturing (DFM) and Design for Assembly (DFA) n project management.

· Proficient in tolerance stack up in GD&T

· proficient in the following are added advantage: motion systems, Opto-mechanical systems, thermal and vibration control, design of laser structures.

Whats on offer:

(1) Good benefit

(2) Stable Management

(3) Dynamic work environment

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Michelle Goh

EA License No: 22C1142

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Prepare contracts & project administration
• Taking-off quantities for tendering and ongoing project
• Responsible for claims, variation orders, payment, budget & cost control and settlement of final account
• Liaise with sub-contractors and suppliers for quotation and procurement
• Budget preparation and cost presentation to management
• Manage material orders, order documentation and project account

Requirements:

• Degree in Building/Quantity Surveying/Civil Engineering from a recognized University, or Diploma in Building or Quantity Surveying from a recognized Polytechnic
• Preferably have local construction experiences
• Computer literacy in MS office especially Excel
• With Autocad and drafting experience will be an advantage
• New graduates may apply

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Review and study the contract drawing for construction before construct.
• Check and ensure all the construction drawing and materials to meet the required standard.
• Assist Project Manager on all site work, supervision works, schedule and planning for project progress.
• Manage daily work on site, including supervising and monitoring the site labour force.
• Discuss with Head of Department for site problems and technical difficulties and resolve on site and coordinate with M&E team for site progress.
• Attend consultant meeting and highlight the discrepancies to ensure all works are carried out in accordance with the drawings, specifications and construction procedures and BCA requirements.
• Liaise and conduct sub-cons meeting for daily work.
• Prepare and submit drawings and documents according to the project requirements.
• Inspect all Structural and Architectural work with RE/RTO and kept record the entire document properly.
• Prepare paperwork for ISO and GGBS documentation for BCA audit.
• Filing the document of project paper works and As-built drawings up to date.
• Ensuring compliance to Workplace Safety and Health Acts
• Attend WSH meeting, daily toolbox meeting and Site WSH inspection.

Requirements:

• Diploma in C&S Engineering / Architecture or equivalent
• Preferably with working experience in foundation works
• Proficient in Microsoft Office and knowledge of AUTOCAD
• Independent, diligent and highly motivated with excellent team spirit
• Willing to work overtime including weekends and public holidays when necessary

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]