Total 11,216 Engineering job vacancies in 3 CHANGI BUSINESS PARK CRESCENT CHANGI BUSINESS PARK SINGAPORE

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Identify and resolve problems with marine motors, auxiliary engines, steering systems, and other related components.
• Repair inboard and outboard engines, focusing on fuel, cooling, and exhaust systems.
• Perform regular maintenance to ensure the proper functioning of all shipboard systems.

Requirements:

• Diploma in Marine Engineering or equivalent.
• At least 2 years of nautical maintenance and repair experience.
• Skilled in using diagnostic tools and marine service equipment.
• Good understanding of marine engines, auxiliary engines, and cargo pumps.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Provide presales support by solving technical business solutions for the client.
• Responsible for product demonstration, proposal writing, creating compliance table, training and product enablement.
• Develop working proficiency and obtain certifications on assigned products and technologies.
• Conduct hands-on POC independently and present vendor’s solution to partners and end-users.

Requirements:

• Diploma in Computer Studies or equivalent
• At least 2 years of presales experience in IT network and Cybersecurity domain.
• Good knowledge of security and networking infrastructure environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Setup and troubleshooting of semiconductor equipment and record engineering improvements for future reference
• Build procedures for assembly, inspection and testing of equipment

Requirements:

• Diploma in Mechanical/Mechatronics Engineering
• At least 2 years of experience in setting up automation equipment
• Knowledge of Electro Mechatronic System

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Handle the design team to achieve targets for the Civil engineering, Geotechnical engineering, Infrastructural design works.
• Lead consultant and review their design to ensure to meet the relevant requirements and the project’s preference.
• Discuss the design results to the client and other stakeholders and obtain their agreement.
• Enhance the design to reduce cost and construction schedule effectively.
• Finish all design works including necessary approvals without adversary affecting the tender/construction schedule.

Requirements:

• Degree in Civil Engineering recognized by the PE Board
• At least 7 years of marine civil design experience in a large-scale project.
• Good knowledge in international and domestic standards for design work.
• Experience in marine structure D&B plant project and overseas ODA project is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

• Handle the Precast Concrete Production in the factory.
• Understand the design drawings and production drawings and conduct quality check.
• Liaise with all the relevant parties for production and inspection of the factory.
• Manage the Suppliers and Contractors to rectify if there are any defects prior to delivery to site.

Requirements:

• Diploma in Civil Engineering or equivalent
• At least 4 years of PPVC and/or PBU Production control experience.
• Proficient with ICTs, Digital Progress control/monitor.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Responsible for the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tape out.
• Liaise with the front-end design team to complete the chip floorplan, clock architecture, and power plan.
• Study the physical design methodology of advanced process nodes and builds an automatic physical design platform.

Requirements:

• Degree or above in Electronic Engineering or equivalent.
• At least 5 years of hands-on project in digital backend design experience.
• Familiar with TCL, Perl, or Python script development with EDA tool design.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements.

Requirements:

• Degree in Civil Engineering
• At least 5 years of relevant working experience

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Role:

Production Engineer (Mechanical / Manufacturing)

• Singapore Based (Senoko, Sembawang area, company transport provided)
• 5 Days work per week (8am to 5.30pm)
• Salary: $3,500 - $4,500 + Allowance + AWS + VB
• Degree in Mechanical/Manufacturing Engineering or equivalent + 2 years with relevant experience is an added advantage.
• Knowledge on TS/IATF 16949, OHSAS18001, ISO14001, SPC, FMEA and TPM will be added advantage.
• Require putting on jumpsuit and protective mask as Personal Protective Equipment whenever it is necessary. + Willing to work overtime when needed
• Career Progression Opportunities

Responsibilities

• Responsible for production operation activities to ensure smooth and efficient manufacturing process.
• Liaise with cross functional department on effective corrective/preventive actions, including carry out improvement activities such as process optimization, benchmarking, etc through various statistical tools and software.
• Handle audit in accordance with TS/IATF & ISO and OHSAS requirements

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

Our client provides products and solutions to hospitals in Singapore.

• Develop and execute validation protocols for washers and sterilizers used in hospital settings.
• Support regulatory submissions and inspections, providing necessary documentation and evidence of compliance.
• Ensure documentation is complete, accurate, and audit-ready.

Requirements:

• Degree in Biomedical Engineering
• At least 2 years experience testing Central Sterile Supply Departments and/or water treatment systems.
• Excellent analytical, problem-solving, and communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Position Title: Sales Engineer (Data center)

Working Location: Boon Lay

Working Days: Monday - Friday

Working Hours: 8:30am - 5:15pm

Salary range: SGD 4,500 to SGD 6,500 monthly, 13th month, SGD 250 transport allowance

SPECIFIC RESPONSIBILITIES

• Generate new business opportunities and proposes potential business deals by contacting potential customers, decision makers and target accounts. Screens potential business deals by analyzing market strategies, deal requirements and evaluate options.
• Works closely with local, regional, and global teams to close new business deals with persuasive approaches and pitches that will convince potential key accounts/customers to do business with PS. Collaborates to establish long term working relationships with key stakeholders and decision makers at different management levels across key accounts’ organizations.
• Establish, cultivate, and maintain key relationships with end customers, influencers, and contractors. This can be done in conjunction with distribution partners and direct engagement.
• Uncover and build opportunity pipelines with Sales, end customers and advance through the sales stages progressively till deal closure. Ensures that data is accurately entered and managed within PS’s CRM and sales/project management system.
• Establish budgetary forecasts and sales volume targets for the SEA DC market.
• Collaborate with Sales to assess level of involvement required from distribution to ensure success of closing business and project opportunities. Provides project guidance for price and quotation strategy to distribution network.
• Identifies and support in qualification of strategic alliances to expand PS solution, products, and services; and business networking to leverage into additional markets.
• Provide front line Data Center related marketing and technical support to distribution partners and dealers, as necessary.
• Analyze sales and market data to provide relevant information to senior management for decision making.
• Promote PS in trade events and associations. Works with Marketing and Engineering to create, prepare and present technical papers and other application specific white papers for marketing collateral, trade journals and conferences.

TRAVEL

• This position requires travel up to 50%.

QUALIFICATIONS / REQUIREMENTS

• Degree in Electrical or Mechanical Engineering with at least 8 years of relevant sales experience in the power generation business.

☘The Supreme HR Advisory Pte Ltd EA No: 14c7279

☘LIM JUN SHENG Reg No: R22104301

Field Service Engineer (Laser machine & Semiconductor Equipment)

• Office: Bendemeer, most of the time at customers site (island-wide)
• 5 days Mon-Fri 830am-530pm,1 hour break
• S$3,500 - 4,000

Job scopes and requirements:

• Install, troubleshoot, repair & service of laser machine.
• Carry out regular maintenance, repairing of equipment/machines and follow up on work orders, onsite-support equipment/machines installation
• Diploma in Electrical /Electronic or Engineering.
• 1-2 years working experience in Laser Application Equipment and Semiconductor Industrial, knowledge of electrical & mechatronics.
• Willing to travel island-wide

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

About Us

Since pioneering Asia Pacific’s first international-class serviced residence with the opening of The Ascott

Singapore in 1984, Ascott has grown to be a trusted hospitality company with over 950 properties globally.

Headquartered in Singapore, Ascott’s presence extends across more than 230 cities in over 40 countries in Asia Pacific, Central Asia, Europe, the Middle East, Africa, and the USA.

Its diversified accommodation offerings span serviced residences, coliving properties, hotels and independent senior living apartments. Ascott's award-winning hospitality brands include Ascott, Citadines, lyf, Oakwood, Somerset, The Crest Collection, The Unlimited Collection, Fox, Harris, POP!, Preference, Quest, Vertu and Yello. Through Ascott Star Rewards (ASR), Ascott’s loyalty programme, members enjoy exclusive privileges and offers at participating properties.

A wholly owned business unit of CapitaLand Investment Limited, Ascott is a leading vertically-integrated

lodging operator. Harnessing its extensive network of third-party owners and in-market expertise, Ascott

grows fee-related earnings through its hospitality management and investment management capabilities.

The Opportunity

This headcount will play the part of a Data Engineer to build and design our Enterprise Data Platform for optimal data retrieval to facilitate the development of dashboards and other visualizations for our Senior Management and business stakeholders.

Responsibilities:

• To design, build and test deployment & operation phases of Lodging’s Enterprise Data Platform for current and future projects.
• Review, construct or re-structure, test and maintain data architecture
• Review and establish best practices for data management, reporting and security
• Improve data foundational procedures, guidelines and standards
• Evaluate datasets and identify ways to improve data reliability, efficiency and quality
• Comprehend, design, acquire and manage organizational datasets that support analytics to achieve business goals
• Optimize data retrieval to facilitate development of dashboards and other visualizations for stakeholders
• Coordinate with internal infrastructure teams to complete planned tasks and problem-solving where necessary
• Support data management projects when needed and perform additional data related tasks

Requirements:

• Degree in Computer Engineering or other relevant technical disciplines
• At least 3 years of data engineering or data application software engineering experience
• Experience in object-oriented design, coding and test patterns as well as experience in engineering software platforms and large-scale data infrastructure
• Hands-on working experience with big data systems (Hadoop, HDFS, Hive, Spark)
• Extensive knowledge in SQL, Scala and Python programming languages
• Experienced in Microsoft stack of analytics products (SQL Server, Azure Data Factory, Azure Databricks, Azure Data Warehouse, Integration Services, Data Quality, Master Data Services, Power BI, Fabric)

Product quality review associated with the manufacturing process. Impacts quality of own work and the work of others on the team. Executes standard operational/technical tasks typically subject to instructions and work routines. There is latitude to rearrange the sequence to complete task/duties based on changing work situations.

Essential Responsibilities:

• Partner and engage with Operations and Engineering teams to facilitate and drive robust RCCA in order to reduce Customer Disruptions and improve customer satisfaction.
• Partner and engage with Operations and Engineering teams to facilitate and drive robust RCCA in order to reduce Workmanship/ WIP Losses, Rework and Turnbacks, and improve FTY, delivery performance, and COQ.
• Partner and engage with Operations/Engineering teams to facilitate and drive avoidance of repair-induced Departures.
• Track and monitor quality metrics (Yield, Losses, Escapes), and perform trend analysis to identify systemic improvement opportunities.
• Drive engagement & training of inspectors and certifying staff to ensure disposition & inspection
• Drive engagement and participation in Lean and quality improvement across the site.
• Drive and promote Quality culture and participate in EHS and other shop initiatives as necessary.
• Act as focal point for all quality matters and clarifications for the business unit.
• Support internal audits and perform CAR verifications.
• Support, review and approval of New Product Introduction (NPI) and Process Change Notice (PCN) initiatives.

Qualifications / Requirements:

• Bachelor’s degree in Mechanical/Aerospace/Material Engineering from an accredited university or college (or equivalent)
• Candidate with relevant aerospace experience in repair/manufacturing processes or quality assurance role has added advantage.
• Fresh graduates are welcome to apply as well
• Good command of written and spoken English
• Basic proficiency with of PC tools and software (e.g. Microsoft Office)

Desired Characteristics:

• Knowledge of general aviation legislation and quality systems (AS9100)
• Knowledge of manufacturing processes (heat treat, welding, shot peening, coating, chemical processes, non-conventional machining)
• Demonstrated work experience in reading and interpreting blueprints or engineering specifications;
• Knowledge of repair/manufacturing fundamentals
• Knowledge of Lean and Six Sigma quality concepts and tools.
• Knowledge of RCCA/HF techniques
• Knowledge of Lean concepts and tools.
• Strong attention to detail and accuracy
• Humble: respectful, receptive, agile, eager to learn​
• Transparent: shares critical information, speaks with candor, contributes constructively​
• Focused: quick learner, strategically prioritizes work, committed ​
• Leadership ability: strong communicator, decision-maker, collaborative​
• Problem solver: analytical-minded, challenges existing processes, critical thinker

The Manufacturing Engineer – NPI is responsible for the timely development and industrialization of Component Repair New Product Introduction (NPI) projects, working with relevant functional teams, and ensuring safety, quality, delivery and cost objectives are met.

Roles and Responsibilities

• Lead and develop repair processes for Component Repair New Product Introduction (NPI)
• Generate manufacturing routers and instructions, Repair Source Substantiation packages, and other documentation required for industrialization and approval.
• Lead resolution of technical and operational challenges or concerns raised, and ensure follow through till approval is obtained and repair is handed over to shop operations.
• Work closely with the Repair Development and Delivery team in Singapore, USA & other global sites, during the NPI repair development phase & industrialization.
• Manage multiple NPI projects by providing scheduling, resource management, budget control and EHS compliance.
• Lead and effectively interface with Operations, Quality, Engineering, and other support teams during NPI repair industrialization in the Shop, and ensure that it meets Safety, Quality, Delivery, and Productivity objectives, within schedule and budget.
• Interface with vendors and internal functions in an effective manner to ensure that the action items to be carried out for the NPI are executed on time and on budget.
• Assure that all engineering designs and technical data are completed and accurately documented to provide an accurate technical/historical base for future reference and to meet customer / end user requirements.
• Participate in Lean initiatives, including continuous improvement of processes, and utilize Six Sigma tools for NPI process improvements.
• Implement new technology and/or process improvements to increase productivity of new repair processes.

Required Qualifications

• Bachelor’s degree from an accredited university in Mechanical / Aeronautical / Material or other relevant Engineering discipline with 4 years of relevant experience.

Desired Characteristics

• Good understanding of manufacturing and inspection tools and processes used in the repair industry – heat treat, thermal spray, peening, welding, machining, etc.
• Working knowledge of blueprints, application of engine manuals and technical substantiation process will be an advantage.
• Good time management and strong organizational skills, with ability to multi-task to meet deadlines and customer needs.
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker.

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Our client is a global leader in semiconductor inspection solutions.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Prepare documentations and coordination with government sectors.

Requirements:

• Degree in Civil Engineering
• At least 5 years of experience in LTA project

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

The Manufacturing Engineer is responsible for product, process and equipment development and ensuring that existing processes and equipment meet quality requirements and operational objectives at GE Aviation, Engine Services - Singapore. This role requires deep level of relevant experience and expertise within the same manufacturing/production field

Essential Responsibilities:

• Own all technical issues relating to the product/process, eg. product and process yield rates, etc.
• Perform process trials, analyse data and produce write-ups on the trials.
• Prepare technical specifications for the purchase and upgrading of relevant equipment.
• Implement New Product Introduction (NPI)s, new coating and welding processes into production.
• Generate Work Instructions and Operating Procedures.
• Ensure that all relevant processes comply with quality requirements, conduct investigations and implement corrective actions as required.
• Collaborate with relevant stakeholders to improve equipment utilization and labour efficiency and reduce operating costs through Lean initiatives.
• Conduct Risk Assessments and ensure that relevant processes are operated in compliance with Environmental, Health and Safety Regulations and Policies.
• Conduct training and certification for relevant technicians.
• Familiar with using lean concept to drive continuous improvement and productivity in the processes.
• Familiar with Lean concepts

Qualifications/Requirements:

• Degree in either Mechanical or Aerospace Engineering from a local or internationally recognised university.
• At least 5 years experience in a Manufacturing Environment is preferred.
• Candidate with previous experience within Aerospace industry is preferred.
• Candidate with a background in manufacturing or production would be considered.

Desired Characteristics:

• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker

• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Develop test programs for Digital, PMIC, RF & Mixed Signal products on automated test equipment.
• Liaise closely with the design engineers on the first silicon debug, device characterization, test program bring up and production release activities.
• Troubleshoot digital vectors (JTAG/SCAN/ATPG / Functional / Mbist) and Device characterization across PVT (Process, Voltage and Temperature).

Requirements:

• Diploma in Electronics/Electrical/Communication Engineering or equivalent.
• At least 3 years of developing SOC programs from NPI to volume ramp stage experience with Advantest V93k or Teradyne Uflex/Iflex.
• Proficient in Java, C/C++, Visual Basic, Perl, Python

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Our client is a global leader in semiconductor inspection solutions.

• Implement software development/support for automated computer vision equipment.
• Participate in Software Development Life Cycle.

Requirements:

• Diploma in Engineering
• At least 2 years of working experience in Visual Studio Development Environment.
• Good understanding of automated Computer Vision equipment, image procession automatic

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is a global leader in semiconductor inspection solutions.

• Support component selection, engineering evaluation, and testing of parts and sub-modules for vision inspection equipment.
• Develop electrical parts and sub-modules for vision inspection equipment.
• Update product design documents, drawings, and BOM (Bill of Materials).

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent.
• At least 2 years of relevant working experience
• Proficient in CAD software for electrical and schematic design, as well as PC hardware, Windows OS, and software.
• Knowledge in PCB/PCBA design, fabrication, and testing processes is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is Germany-based company specializes in medical and laboratory technology, supplying hospitals and healthcare providers.

• Collaborate with development and product teams to understand requirements and functional specifications for effective test coverage.
• Analyze requirements and specifications to identify testing needs.
• Develop comprehensive test plans and create both manual and automated test cases.

Requirements:

• Degree in Computer Science/Software Engineering or equivalent.
• At least 2 years of Software Quality Assurance (QA) experience in test automation tools (such as Katalon, Cucumber, Selenium) and continuous integration/continuous deployment (CI/CD) pipelines (e.g., Jenkins).
• Proficient in database management and executing queries with MSSQL, along with experience in version control using GitHub.
• Knowledge in Agile/Scrum practices and capable of excelling in a collaborative, fast-paced work environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Handle schedule work in accordance with the master and detailed work program.
• Manage technical and engineering problems.
• Liaise with consultants for technical issues and organise site activities with subcontractors.
• Maintain quality standards and perform site inspections and resolve technical issues on time.

Requirements:

• Degreein Civil Engineering recognised by Singapore PE Board.
• Registered Resident Engineer with IES/BCA.
• At least 3 years of relevant working experience preferably in handling LTA projects.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740