Total 3,528 Engineering job vacancies in Pasir Ris, North East

Job Description

· Perform site survey with customer and contractor for in-building sites

· Designing network distribution (using IBWave preferred), compile site survey report for submission

· Supporting radio network planning & optimization projects for in-building and outdoor scenarios

· Performing drive/walk test including post processing and analysis (using NEMO, TEMS, etc)

· Performing RF optimization for 4G/5G sites and performance monitoring.

· Solving RF related problems, troubleshooting and identifying root cause for performance issues

· Being the technical point of contact with project stakeholders, vendors and customer

Requirements

· Tertiary education qualification majoring in Telecommunications, Electronics or related field

· Minimum 2 years of RF planning & optimization experience in LTE mobile network deployment.

· Excellent in the fundamentals of radio access technologies and antenna systems.

· Experience in multi-vendor wireless equipment operation and network optimization.

· Dedicated team player with good communication and interpersonal skills.

· Able to work well with cross cultural teams.

Job title: Electrical /Electronic engineer for IoT instrumentation and system integration

Job Description:

• Design electrical control panel and remote terminal unit (RTU)
• Prepare and review electrical designs for approval and bill of material for procurement
• Prepare detail operation & maintenance instructions and manual
• Coordinate fabrication, inspection, installation, testing and commissioning of equipments.
• Responsible for the control & software structure, microcontroller/PLC programming, testing, commissioning and customer support
• Interface with measurement instruments and sensors
• Integration of RTU to back end IT platform

Requirement:

• At least 3 year of relevant experiences in related industries
• Experience in microcontroller/PLC programming
• Graduate from Polytechnics/University or equivalent
• Good hands on and trouble shooting skills.
• Ability to support overseas projects on short notice.
• Provide field support on regular basis

Responsibilities :

The candidate will be involved in project activities such as evaluating and recommending suitable technology and solutions, conducting Proofs-of-Concept (POCs), and coordinating projects from ideation through to completion. In addition, the candidate is to provide end users IT service and support within A*STAR EUC environment. This includes installing, diagnosing, repairing, maintaining, and upgrading all IT hardware/software and equipment (including but not limited to PC, IP Phones, and Printers).

Requirements :

• Diploma in Computer Engineering, IT or equivalent certifications
• Min 2 years of IT work experience with demonstrated problem solving and customer service skills
• At least 3 years of experience in desktop computing, End User support, server administration and IT security.
• Competent in Windows OS, Apple MacOS, iOS devices and Linux Endpoints.
• Experience in Server Environment and AD Administration and tools including WSUS, Tanium, MS Intune.
• Understanding of IP Phone, LAN, Wifi, WAN, Firewalls, VPN technologies

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

COMPANY DESCRIPTION

1-Net manages carrier-neutral Internet Data Centers, along with providing a comprehensive range of integrated services including network connectivity, managed services, work area recovery suite, cloud and media delivery services. 1-Net's Data Center Corridor initiative currently interconnects key data centers in Singapore to facilities quick deployment and providing a diverse connectivity options for enterprises and service providers.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

1-Net is fast transforming itself into Asia's Data Centre of Choice. As one of the pioneers in broadband development in Singapore, 1-Net currently manages telco-class carrier-neutral Internet Data Centres, along with providing domestic and international connectivity, managed services and media delivery services. 1-Net offers superior stability, secure delivery and service experience through its services. It's uniquely positioned in Southeast Asia, with a comprehensive range of integrated services and a media-centric approach to bring cutting edge solutions to its customers.

This role is required to managed and support 1-Net's IT Services business, including Cloud Services, Managed Services, DC services, and Business Continuity Management Services.

Responsibilities

• Providing 2nd/3rd level support to Network Services
• Problem resolution in customer network issues
• Plan, implement, review and project manage network infrastructure projects and operations
• Test, evaluate and recommend new networking products for customers
• Review and continuously enhance existing network services
• Improve network performance; optimize network usage and bandwidth usage and secure the core network
• Optimize routing policies and capacity management to ensure minimal network latencies and outages
• Secure network with relevant security policies
• Responsive to solve network issues, on standby 24x7
• Assist L1/L2 Engineers to handle customers' issues directly
• Recommend suitable and relevant solutions to solve customers' issues
• Provide maintenance support for all network infrastructure
• Provide monthly network infrastructure performance review report and capacity planning recommendations
• Ensure efficiency and effectiveness of the implemented solutions in meeting user's requirements and work processes and procedures.
• Ensure timeliness & quality of project delivery.
• Structured cabling system implementation and cross connect provisioning.

• Minimum Diploma or equivalent qualification.
• In depth practical experience in LAN/WAN implementation which include router & switches setup and configuration.
• Knowledge and experience with networking protocols, including BGP, VXLAN EVPN, OSPF, IOX-XR, NX-OS
• Structured Network Infrastructure for Layer 2 & 3 support.
• Certification in CCNA, CCNP is highly preferred
• Shift work required

Job Description

• Well knowledge in the design of the Aluminium Formwork and System Formwork for columns, walls, beams, slabs and staircases.
• Produce drawings using CAD software.
• Assist Project Engineers with drafting RFIs when required.
• Creating accurate project specifications for structural elements with temporary propping and formwork.
• Generate technical reports upon requested.
• Examine and advise on improving formwork’s structural integrity and strengthening the formwork system.
• Communicate effectively with Project Managers through email and verbal interactions.
• Maintain records for storage material and coordinate with the fabrication team.
• Report to the HOD.

Job Requirement

• Candidate must possess at least a Diploma/Advanced/Higher/Graduate Diploma in Engineering (Civil) or equivalent.
• At least 4 Years of working experience in the related field.
• Required Skill(s): AutoCAD.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Description

• Well knowledge in the design of the Aluminium Formwork and System Formwork for columns, walls, beams, slabs and staircases.
• Produce drawings using CAD software.
• Assist Project Engineers with drafting RFIs when required.
• Creating accurate project specifications for structural elements with temporary propping and formwork.
• Generate technical reports upon requested.
• Examine and advise on improving formwork’s structural integrity and strengthening the formwork system.
• Communicate effectively with Project Managers through email and verbal interactions.
• Maintain records for storage material and coordinate with the fabrication team.
• Report to the HOD.

Job Requirement

• Candidate must possess at least a Diploma/Advanced/Higher/Graduate Diploma in Engineering (Civil) or equivalent.
• At least 4 Years of working experience in the related field.
• Required Skill(s): AutoCAD.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Description

• Well knowledge in the design of the Aluminium Formwork and System Formwork for columns, walls, beams, slabs and staircases.
• Produce drawings using CAD software.
• Assist Project Engineers with drafting RFIs when required.
• Creating accurate project specifications for structural elements with temporary propping and formwork.
• Generate technical reports upon requested.
• Examine and advise on improving formwork’s structural integrity and strengthening the formwork system.
• Communicate effectively with Project Managers through email and verbal interactions.
• Maintain records for storage material and coordinate with the fabrication team.
• Report to the HOD.

Job Requirement

• Candidate must possess at least a Diploma/Advanced/Higher/Graduate Diploma in Engineering (Civil) or equivalent.
• At least 4 Years of working experience in the related field.
• Required Skill(s): AutoCAD.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME's advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME's heterogeneous integration platform.

Job Description:

Digital IC Design and system-level exploration:

• Contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.
• Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.
• Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.
• RTL implementation for custom circuit design using Verilog/SystemVerilog
• Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architectures.

Simulation, Verification, and Implementation:

• Conduct thorough simulation and verification of digital designs to validate functionality and performance.
• Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration
• Perform timing analysis and collaborate with the team to optimize designs for timing closure.
• Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

Prepare detailed design documentation, including specifications, test plans, and reports.

Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements:

• Master's, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

Job Description

The successful candidate will join the Information Technology Division, System Technology department and will be responsible for managing Content Delivery Network (CDN) which includes Cyber Security, as well as administering Monitoring and Log Management Tools.

Key Responsibilities include:

• Work closely with CDN providers and application teams to ensure internet websites/mobile apps are healthy in terms of availability, response time and security posture.

• Conduct regular security reviews and finetune WAF and BOT rules to mitigate any cyber threats.

• Administer various monitoring and logging tools, which includes application onboarding and advanced configuration.

• Perform system administration activities such as troubleshooting, root cause analysis and implement corrective/preventive actions during and after an incident.

• Support audit and infrastructure/network security scans, disaster recovery and security related drills and operate within assigned fiscal budget.

• Build automation wherever possible to improve development team’s agility and reduce human errors.

• Explore, learn and deploy new technologies and provide training to the IT community within the company.

• This position requires periodic system administration outside normal business hours.

Requirements:

• Possess a degree in Information Technology or related fields.

• Minimum of 3 years of IT Infrastructure experience with at least 1 year of hands-on experience in managing the infrastructure of an eCommerce website.

• Experience with Akamai or equivalent CDN providers preferred.

• Demonstrate strong knowledge in infrastructure areas such as Content Delivery Network (CDN), Cyber Security (WAF and Bot Mitigation), internet protocols, DNS, virtual server technologies, networking (LAN, WAN, SDN), Integration and Messaging Platform, scripting and monitoring tools.

• Administrator experience with Application Performance Monitoring (APM) tools such as Dynatrace and Log Management System (LMS) such as Splunk.

• Conversant with infrastructure definition tools such as Cloud Formation and Terraform, and with YAML/JSON deployment templates.

• Strong analytical, project management, communications and interpersonal skills.

We thank all candidates for your interest in Singapore Airlines, and regret that only shortlisted candidates will be notified.

• Position: Junior Sales Executive/Engineer (FULL TRAINING PROVIDED/NO EXPERIENCE WELCOME)
• Location: Toh Guan
• Working Hours: Monday to Friday (7am - 4pm), Alternate Saturday (7am - 12.30pm)
• Salary (commensurate with experience): Up to $3,500 + Performance Bonus
• Duration: Permanent
• Industry: Fire protection system supplier

Main Responsibilities:

• Source for new clients
• Promote the company’s products/services addressing
• Following up on leads to make advisor/client appointments
• Build long-term relationships with new and existing customers
• Any other ad-hoc duties assigned

Requirements:

• Minimum 'N' Level
• Full training is provided for inexperienced candidates

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Lab Officer/ Research Engineer

Job Description:

Be part of an exciting FAB Operations Team working on cutting-edge advanced packaging process technologies.
This position is based in Singapore.

Responsibilities:

• Operate multiple type of semiconductor equipment in cleanroom environment.
• Ability to use computer-based programs and applications to perform daily work/duties.
• Operate equipment based on the required process specifications (e.g. procedures, change notifications, etc.).
• Participate actively and be responsible in assigned on-the-job assignments and other required trainings when requested.
• Provide machine operations coverage and backup supports when necessary.
• Adequate understanding of the Equipment in-charge, monitor performance, timely communication with Engineers-in-charge to perform equipment errors recovery promptly when necessary.
• Demonstrate excellent teamwork to promptly execute process sequences and data collections if required.
• Always follow safety protocols & rules in the Clean Room.
• Ensure 6S in the work environment and promptly report hazards/ suspicious/ abnormal activities or personnel if any identified.
• Address potential areas for improvements such as wafers processing cycle time, Equipment utilization, Safety/ Compliances, and cost savings.

Experience:

• Diploma in MicroElectronics/Electrical/Mechanical/Chemical Engineering.
• Basic understanding on semiconductor process is preferred.
• 1-3 years of experience in semiconductor processes (Diffusion, Wet Clean, CMP, ECP, Litho, Etch, CVD, PVD, etc.) will be added advantages.
• Must be a self-starter, dependable and highly motivated

• Position: HSE Officer/Engineer/Lead
• Location: Gul Road (company transport provided)
• Working hours: 5.5 days work week
• Salary (commensurate with experience): Up to $6,000 + Performance Bonus (Up to 6 months) + Flexi Benefits + OT pay (if required)
• Duration: Permanent
• Industry: Marine & Construction Engineering (Listed & MNC Company)

Main Responsibilities:

• Ensure provision of the Act and Regulations are complied with
• Promote safe conduct of work in the yard
• Liaise with WSHO or Safety Coordinator on the matter with regards to safety, health and welfare of people working in the yard
• Conduct Safety Induction Programme
• Ensure that appropriate personal protective equipment is used by the employees, contractors' workers and visitors
• Conduct inspection tours at worksite
• Report any unsafe conditions, equipment and housekeeping
• Apply permit to work system as required by the procedures and regulations
• Liaise with subcontractors’ safety supervisors with respect to safety of work undertaken by subcontractors
• Ensure that all records of safety equipment are in order and properly maintained
• Assist WSHO in the event of any incidents
• Any other ad-hoc duties assigned

Requirements:

• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only
• Minimum Diploma in Workplace Safety & Health/Engineering or related discipline
• Minimum 3-5 years of experience in marine shipyard operations
• Ensure compliance with all legal and regulatory requirements

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Description:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• Become the technical Expert for the respective machine specialization.
• Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Se expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Bachelor Degree in Electrical / Electronics / Chemical / Mechanical /Microelctronics Engineering
• Min 3 years of relevant work experience in Photo Equipment in semiconductor industry
• Excellent communication, interpersonal and leadership skills
• Strong analytical skill and able to work under pressure in fast pace environment
• Proficient with MS Power Point, Excel, Excel VBA, Power BI

Job Description:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Mfg can have more flexibility.
• Perform process matching between equipments to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Mfg Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide feedback/ training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics
• Fresh Degree Graduate with Engineering specilization in the above or 2-3 years of relevant work experience
• Strong interest in semiconductor process
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Roles & responsibilities

1. Coordination with Construction team/ Design Consultant/PE/construction subcontractor, etc. for Detail Design Development.

2. Carry out detailed analysis and design of civil, structural, and geotechnical works.

3. Prepare design calculation reports and structural drawings for authorities' submissions.

4. Planning relevant temporary civil structure, plan & section required for the Traffic diversion, such as Drain diversion, Retaining wall, shop drawing development.

5. Review and planning for ERSS system for Underground structure using Diaphragm wall such as KP, Decking, Strutting, decking, etc.

6. Check/Rectification of all the structural drawing/ shop drawing if required.

Requirements and relevant experience are as below;

1. Bachelor’s / Master’s Degree of Civil Engineering or close discipline from a recognized Institution.

2. Strong engineering fundamental and analytical skills in geotechnical and structural analysis and design works is an advantage.

3. Good knowledge of the application of design and drafting software.

4. Minimum 5 years of experience in Civil and Structural Engineering especially for LTA Project.

5. Be well-aware of Traffic Diversion, Temp. Drain Diversion, and authority approval procedure.

6. Be well-aware of Underground Structure/Construction Sequences and related civil design works.

7. Be well-aware of Eurocode, LTA CDC, and relevant design specification/standards.

* Candidates who has experience as CS engineer (Design) in D&B contractor side would be an advantage.

* Interested applicants are required to submit their detailed CV and state their current and expected salary.

Responsibilities:

Design & Details of Civil Structural Engineering Works

So-Ordination with clients' Representatives, Project Managers, Consultant Team and architech from inception to completion of projects.

Attend meetings during course of construction of projects

Responsible for timely submission of reports and completion of projects for tender/submission with target dates.

Responsible for on-site technical/engineering /administrative matters.

To provide all relevant endorsements required by the relevant authorities.

Supervise all civil, structural and geotechnical building works both permanent and temporary.

To ensure that contractor had obtained all necessary permits and clearance to work.

To conduct site inspection and ensure that contractor(s) implejment corrective actions and timely preventive/mitigation measures to protect surrounding structures.

To cooridnate with contractor,AC,QP(D), relevant agencies, including interfacing contractors and consultants etc. for the works.

To review, evaluate and assess all fromwork structure, formwork support systems of RC structures and submit evaluation report endorsed by a PE.

To review and supervise safety, environmental and health matters.

To supervise the installation of instrumentation.

To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations.

to review Contractor's design and supervise all works associated to underground works below 6m.

Requirements:

Degree in Civil & Structural Engineering

Qualified candidates please submit in your updated resume in MS Word format with your latest RTO cert or RE cert attached.

At least 4 years' of experience, of which 3 years' experience in substructure & superstructure works or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

Possess a valid RTO or RE by JAC of IES/ACES as QSS Singapore.

Possess BCSS and d/or confined space certificate.

Should be willing to work 56hours/weeks

Candidate to be able to work shift workds due to the demands of the project.

Candidate expected to work in a team those who possess team work spirit is welcom to join.

As an Implementation Engineer at Oracle Opower, you will work with a team to implement SaaS-based energy efficiency and customer engagement programs on behalf of our utility partners. You will collaborate with a diverse group, including a Project Manager, a Senior Implementation Engineer, as well as members of the Product Engineering, Product Management, and QA teams. Setting up new programs for our utility clients is the lifeblood of Opower, and we rely on Implementation Engineer's input and expertise for our overall success.

Our Implementation Engineers rely on a diversified technical skill-set, including: data manipulation via complex SQL queries, experience on the Linux command line, shell scripting, and software development using high-level programming languages such as Java or Ruby. We do not expect you to immediately be masters of the full spectrum of technologies used, but through on the job training and coaching, you will gain the necessary skills required to launch energy efficiency programs for new utility clients.

Responsibilities

● Communicate with the IT resources of the utility company client to explain technical requirements including web integration, single sign-on configuration, and transfer of utility data

● Analyze, transform, and load utility data from the utility clients to meet Oracle Opower’s data standards

● Integrate utility data with additional data from various 3rd party sources to generate a holistic customer profile

● Build and maintain a deep understanding of our products with the ability to explain them to others; think about how client customization and delivery can be sped up and improved

● Configure and customize Oracle Opower’s energy efficiency SaaS platform to meet the specific needs of each client

● Build long-term relationships with utility clients by launching programs from pilot phase to through large scale rollouts

● Collaborate with cross functional teams to operationalize new Oracle Opower products and features

About You

● Minimum 7 years of hands-on technical experience

● You enjoy sniffing out complex, technical issues and solving them

● You are able to write SQL for large data sets and have recent experience with relational databases, MySQL preferred

● You have experience in Linux and are not afraid of the command line

● You demonstrate some programming knowledge (most of our code is in Ruby and Java, but Perl, Python, shell scripting have their places too)

● Oracle Opower skillset is mandatory as this is a senior position and you are required to interact with utility industry partners and clients

● You are a smart, talented engineer, looking for an exciting, fast-paced company to expand your toolbox and develop your skills.

Overview:

Join Antina’s dynamic team as a Cybersecurity Project Engineer, where the successfully hired candidate will lead cutting-edge cybersecurity projects and ensure robust security operations. This role offers the perfect blend of technical expertise and project management, providing an exciting opportunity to make a significant impact in the cybersecurity landscape.

The 5G Exploratory Platform (5GEP) will serve as the dedicated testbed for 5G infrastructure. This platform will enable the discovery of vulnerabilities, the testing of network equipment, and to enhance the security and resilience of the 5G ecosystem.

Key Responsibilities:

1. Project Management:

• Lead cybersecurity projects from start to finish, ensuring timely and budget-friendly delivery.
• Develop project plans covering scope, schedule, resources, and risk management.
• Collaborate with vendors and internal teams for seamless project execution.
• Provide regular updates to stakeholders and document all project activities.
• Participate in requirement gathering, testing, training, and implementation phases.
• Meet project SLAs and manage potential risks.

2. Operations:

• Update network configurations, software versions, and procedures.
• Ensure security systems are tested and maintained.
• Assist in obtaining technical support from vendors and track system warranties.
• Implement and manage security measures like firewalls, IAM, SIEM, and SOAR systems.
• Respond to security incidents and provide detailed reports.
• Manage system and user functions, including access rights and maintenance.

Qualifications and Required Skills:

• Bachelor’s degree in Computer Science, IT, Cybersecurity, or related field.
• At least 2 years of project management experience.
• Proven experience in cybersecurity operations and project management.
• Strong knowledge of cybersecurity principles and technologies.
• Proficiency in IT, Networking, VMWare, and security tools.
• Excellent problem-solving and communication skills.
• Relevant certifications (CISSP, CISM, PMP, PCNSA/PCNSE) are a plus.
• Security clearance required.

An ideal candidate would possess the following abilities:

• Project Management: Lead and manage project timelines, coordinate with stakeholders, and implement security solutions.
• Network Infrastructure Management: Understand networking protocols, configure and troubleshoot firewalls, switches, routers, and load balancers.
• System Administration: Manage Windows and Linux operating systems, apply hardening techniques, and respond to breaches.
• SIEM: Customize dashboards, alerts, and reports; tune SIEM rules.
• Firewall Operations: Set up firewall rules and configurations, understand firewall logging and traffic monitoring.
• IAM: Knowledge of IAM principles and tools, implement multifactor authentication and single sign-on.
• Vulnerability Management: Use tools like Nessus or Qualys for vulnerability scanning, understand MITRE ATT&CK framework.

How to apply:

Visit our company website at www.antina.com.sg for more information or send your CV directly to [email protected].

Antina is a company driven by ability, performance, and hard work. We adopt fair employment practices and employment decisions will be based on merit, qualifications and abilities. Antina does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Job Description:

• Corporate with the constrcution manager to connect with various government acceptance departments.
• Corporate with the constrcution manager to supervise and manage the site to meet the various goals of the project.
• Corporate closely with subcontractors to monitor the progress of small towns and coordinate the work resources required by subcontractors to meet project requirements.
• Corporate with goverment personnel to conduct on-site inspections.
• Participate in weekly or monthly meetings with subcontractors to discuss work progress and corperate in preparing monthly meeting progress reports.
• Establish good relationships with all relevant parties.
• Corporate to ensure site safety and comply with the requirements of the authorities.
• Corporate to organize relevant physical and electronic documents on site engineer, etc.
• Other tasks assigned by the manager.

Requirements & Qualifications:

• Diploma / Degree or above preferably from a recognized University accredited with PEB, Singapore
• Experience with public residential projects would be advantages
• Proficient in Microsoft Office / Projects, AutoCAD
• Ability to keep a positive attitube in a fast-paced environment
• Good team player

Job Responsibilities:

1. Conduct product certification inspections and evaluations to ensure compliance with relevant standards and regulations.
2. Participate in technical audits and document reviews during the product certification process.
3. Provide professional advice and suggestions to improve product quality and compliance.
4. Communicate with relevant departments and clients to address technical issues and provide support.
5. Perform inspection and survey activities competently, efficiently and ethically.
6. Ensure that applicable industry regulations, company's quality assurance and Health, Safety and Environment (HSE) requirements are complied at all times.
7. Ensure all work done is in accordance to the Company's Code of Business Conduct & Ethics.
8. Perform other tasks assigned by the superior.

Job Requirements:

1. Candidate must possess at least a Diploma and above with at least 2 years of full-time professional work experience in design/technology/production/testing/inspection/certification/research/management related to product implementation. (Professional work experience and general work experience may occur simultaneously)
2. Proficient in inspection techniques and methodologies, have strong understanding of industry-specific technologies and practices.
3. Possess strong problem-solving skills to identify and address non-compliance issues.
4. Able to communicate clearly and effectively in order to report findings and interact with customers.
5. Have good written communication skills for preparing inspection reports and documentation.
6. Possess strong time management skills to handle multiple inspections and deadlines.
7. Candidates with a valid CCAA Registered Inspector qualification will have an added advantage.
8. Candidate must be willing to travel overseas for job related purposes.

Interested candidates, please submit a detailed resume and expected salary via "Apply Now".

We regret that only shortlisted candidates will be notified.

We do not accept any recruitment agency.

The Mechanical Engineer is responsible for the engineering and delivery of mechanical and structural aspects of construction under direction from the Construction Manager. Their activities will involve coordinating design and construction efforts, resolving on site engineering issues and planning and tracking productivity targets.

Key responsibilities and accountabilities

Technical

• Design, integration & coordination, installation & commissioning of mechanical systems and services required for the project
• Liaise with Construction/Installation Manager to ensure job is on schedule on Site.
• Liaise with Client on all technical aspects of the project.
• Provides engineering advice for the Construction/Installation Team.
• Attends meetings with client on all disciplines of the work (i.e. 1 etc.) as required.
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures.
• Ensures that the quality requirements of the client are adhered to and that company procedures are followed.
• Coordination & integration of the design with other engineering design disciplines & services
• Ensure project timetabling requirements are met
• Development / production of inspection & test and operating & maintenance manual documentation.
• Ensure local regulatory and OHS requirements are maintained
• Ensure that the surveys of installations throughout the project are conducted in a professional manner with all results being reviewed and accepted by UGL. All actions resulting from these surveys are coordinated by the Engineer until completion.
• Provides written reports on engineering activities as required by the Project Manager.
• Mentor Engineering Graduates and Engineering Vacation Students (Engineering Assistant)
• Maintain documentation and registers
• Provide monthly reporting data to the Engineering Manager as required

Safety

• Undertake all responsibilities in a safe manner.
• Ensure a safe working condition is present for all employees, contractors and visitors.
• Participate in daily pre-start meetings.
• Use appropriate personal protective equipment and safety systems such as job safety analysis, pre-work checklists and risk assessments.
• Comply and have input into safe working procedures.
• Report hazards, incidents and accidents within company guidelines.
• Assist with safety sections for reports, tenders and proposals.
• Actively participate in safety training.

Other

• Prepare and implement Workpacks, including ITPs
• Detailed planning and engineering of works
• Procurement of suppliers and subcontractors
• Subcontractor and Supplier Management
• Monitor, control and update program and productivity metrics
• Enthusiastically and co-operatively undertake all site inductions as requested by the client.
• Proactively continuously monitor and evaluation systems and procedures specific to site works to ensure that they are up to date, compliant and up-to-date in line with best practice.
• Actively participate in regular learning and development programs to continually enhance and further develop skills and continuously improve capabilities and performance.
• Portray a professional approach at all times through attitude and appearance.
• Ensure that work space is well managed, tidy, organised and safe.
• Comply with all UGL systems and processes and expected behaviours and standards.

Qualifications and Education Requirements

• Mechanical Engineering Qualification.
• Minimum 5 years’ experience in project related disciplines.
• Significant engineering experience throughout, design, construction and commissioning on Brownfields and Greenfields projects.
• Technical experience includes; rotating equipment, static equipment, GE equipment, materials selection, hydraulic systems, pipelines and piping components
• Strong communication skills (oral & written) including strong negotiation and influencing skills and the ability to establish effective working relationships with a variety of people at different levels both internally and externally.
• Demonstrated ability to work independently to organise and prioritise demands, handle multiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast paced environment with multiple and competing demands
• Proficient skills in computers: MS Word, Excel, Access, Outlook
• Leadership ability

• Position : Sales & Project Engineer (Equipment) – Up to $4,000 Basic – Boon Lay - No Experience Required!
• Location : Boon Lay
• Working hours : 5 Days Work Week – 8.45 AM to 6.15 PM
• Salary (commensurate with experience): Up to $4,500 + Performance Bonus + Medical & Dental + Hospital Insurance + Company Van provided
• Duration : Permanent
• Industry : Supply of Equipment for Key Environmental Protection Projects

Main Responsibilities:

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Execute and follow through the sales plan set by the manager with the aim to expand the company’s customer base and ensure its strong presence in Singapore.
• Work as a team to gather information to submit tender.
• Continuously improve on own’s knowledge on supplier’s products with the aim to introduce technology that add value to the customers.
• Review sales activities with the management on a weekly basis, including the status of prospective customers, plans to meet sales goals and status on deadlines.
• Working with the Sales Manager, produces report regularly to communicate with supplier on sales activities and status of project.
• Any other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Engineering
• Minimum 1 year of related experience or no experience is welcome too!
• Must posses Class 3 Driving License
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Position Summary:

Mainly supporting security aspect like firewall checkpoint, security appliances - configuration, troubleshooting, capacity planning. Supporting current operation and deployment of resiliency project.

Roles and Responsibilities:

• Directly reporting to Security Senior Manager
• Assist Architect team on new infrastructure design, implementation, and management of network solutions that form the core infrastructure, ensuring seamless integration across different platforms. This includes procurement of necessary equipment.
• To provide comprehensive product knowledge on the data technology required to deliver, support the networks infrastructure.
• Collaborate with the team to identify network and system needs, monitor performance metrics, troubleshoot, and resolve network-related issues, and implement improvements.
• Deliver project management for network activities encompassing upgrades, deployments, and migrations. Provide technical guidance and user support as required.
• Develop, maintain, and update documentation covering the network environment and operational procedures.
• Generate reports and detailed documentation outlining findings, implemented solutions, and recommendations for further enhancements.
• Oversee network environment to maximize performance, scalability, and minimize downtime.
• Closely coordinate and conform to Change Management policies, process, and procedures on any network changes.
• To implement approved changes, troubleshoot to identify root causes and implement effective solutions.
• Experience on Automating daily network tasks using scripting.
• Be available to provide on-call support as needed.

Qualification/ Requirements:

• Minimum Bachelor in Computer Engineering or equivalent
• Must equipped with CCNP or CCIE
• Network Infrastructure & Hardware: 5+ years experience managing large enterprise network with a strong focus on F5, Palo Alto, Cisco, and CheckPoint Technology.
• Network Devices: In-depth knowledge and proficiency with switches, firewalls, load balancers, routers, and ISE.
• Network Design & Troubleshooting: Expertise in designing, monitoring, and network & incident management (LAN, WAN, VPN).
• Experience with automation tools: Ansible, Python
• Experience with Deployment and automation, advantage to have experience building data center
• Proven track record of success in a fast-paced IT environment.
• Excellent communication and interpersonal skills, allowing you to effectively collaborate with both technical and non-technical stakeholders.
• Ability to work under pressure and delivery the project on time with minimum supervision.
• Certified and experienced with the mentioned technologies.
• 2 years contract

JOB DESCRIPTION

We are looking for a strong candidate with strong AI background and experiences in audio, speech AI training for industrial projects on audio & speech recognitions.

Key Responsibilities: Work on audio processing, data preparation and multiple model training of multi-language code-switch ASR for projects.

JOB REQUIREMENT

• Has a related B.S degree in Computer Science or Software Engineering.
• Experiences in speech signal processing, speech recognition, in both hybrid models, supervised E2E models, LLMs fine-tuned models and deep learning
• Strong in the following programming languages: Python, Pytorch, C/C++, Linux Bash/Shell
• Knowledge in web-based and app developments for demo systems is advantageous

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Project management and execution with target deliverables and schedule.
• Fabrication of silicon photonics integrated circuits based on silicon photonics platform.
• Independently carry out opto-electronic characterization to verify device / circuit design and performance.
• Design / optimize photonic integrated circuit for various applications.
• Test result documentation and performance analysis.
• Performs other duties as assigned. Duties will vary according to the project progress and/or the specific goals of the company
• Collaborate with project team members to ensure device meets specification and verify device's performance