Total 7,482 Engineering job vacancies in SIN01 - Singapore- Tuas West Ave (SIN01)

VFlowTech is excited to offer a PhD scholarship under the Industrial Postgraduate Programme, a fully funded initiative by the Singapore Economic Development Board and Enterprise Singapore. This program provides aspiring researchers with the opportunity to address critical challenges in Vanadium Redox Flow Battery technology, focusing on mitigating shunt currents, reducing losses, and enhancing system reliability and efficiency. Candidates will be full-time employees of VFlowTech while pursuing their PhD at Newcastle University (UK).

The research project aims to develop a hybrid energy storage system (HESS) by integrating flow battery and lithium-ion battery technologies into a single microgrid solution. The candidate will contribute to hardware development and advanced control algorithm creation, optimizing performance, efficiency, and reliability. This prestigious program offers a unique opportunity to drive innovation in energy storage systems.

Key Responsibilities:

1) Design and Simulation of Hybrid Energy Storage System (HESS):

• Determine suitable battery chemistries and sizes for the HESS.
  • Conduct simulation tests and analyze initial results to ensure optimal design and functionality.

2) Development and testing of HESS Hardware:

• Implement and integrate the simulated HESS design into the physical hardware.
  • Conduct intensive testing and validation of the HESS prototype to ensure performance standards are met.

3) Development of Energy MAnagement System (EMS) Algorithm:

• Develop a hybrid EMS to control and optimize the use of both battery technologies.
  • Implement smart charge and discharge control logic to enhance system efficiency, reliability, safety, cost-effectiveness, lifespan, and overall power and energy density.
  • Utilize state-of-the-art AI techniques to develop advanced EMS algorithms for efficient energy management.

Qualifications:

- Academic Background:

• An Undergraduate or master’s degree in electrical engineering, Power Electronics, Energy Systems, or closely related field.
  • Strong academic record and research experience in relevant areas.

- Technical Skills:

• Proficiency in power electronics and energy storage system design.
  • Experience with battery management systems (BMS) and energy management systems (EMS).
  • Familiarity with simulation software and tools used in power and energy systems.

- Research and Development:

• Demonstrated experience in designing, simulating, and testing energy storage systems.
• Ability to conduct independent research and develop innovative solutions to complex problems.
  • Strong analytical and problem-solving skills.

- Soft Skills:

• Excellent written and verbal communication skills.
  • Ability to work collaboratively in a multidisciplinary team.
  • Strong organizational and project management skills.

Benefits:

• Opportunity to work on a pioneering project with significant real-world applications.
• Access to state-of-the-art research facilities and resources.
• Collaboration with leading experts in the field of energy storage and power electronics.
• Competitive salary and funding for research-related expenses.
• Work and earn a PhD degree simultaneously with no tuition fee.

Application Process:

Interested candidates should submit the following documents:

• A detailed CV highlighting relevant experience and skills.
• A cover letter explaining your motivation for applying and your research interests.
• Academic transcripts and certificates.
• Contact information for at least two academic or professional references.

Deadline:

Applications will be reviewed on a rolling basis until the position is filled. Early applications are encourage.

Contact:

For further information or to submit your application, please contact: h[email protected] and [email protected]

Join us in advancing the future of energy storage technology and making a significant impact on the efficiency and reliability of micro-grid systems!

Key Responsibilities:

1.Financial Planning & Forecasting:

• Assist in the preparation of the annual budget and quarterly forecasts.
• Develop financial models to project future performance based on various scenarios.
• Monitor and analyze budget variances and provide explanations for discrepancies

2.Data Analysis & Reporting:

• Prepare monthly, quarterly, and annual financial reports for management.
• Analyze financial data to identify trends, risks, and opportunities.
• Create and maintain dashboards and key performance indicators (KPIs) for business units.

3.Business Partnering:

• Collaborate with department heads to understand their financial needs and provide support.
• Participate in strategic planning sessions and provide financial insights to guide decision-making.
• Assist in evaluating new business opportunities, investments, and projects.
• Participate in building specific FP&A business partnering capabilities such as Commercial Finance, Production Costing Finance, R&D Finance etc.

4.Ad Hoc Analysis:

• Conduct ad hoc financial analysis as requested by management.
• Support special projects and initiatives that require financial expertise.

5.Process Improvement:

• Identify opportunities for process improvements in financial reporting and analysis.
• Assist in the implementation of financial systems and tools to enhance efficiency.

Qualifications:

Education:

• Bachelor’s degree in Finance, Accounting, Economics, or a related field. A Master’s degree or professional certification (e.g., CFA, CPA) is a plus.

Experience:

• 3-5 years of experience in financial planning and analysis, corporate finance, or a related field.
• Experience in financial modeling and forecasting.

Skills:

• Strong analytical and problem-solving skills.
• Proficiency in Microsoft Excel and financial modelling software.
• Familiarity with financial reporting tools and ERP systems (e.g. Netsuites, BI).
• Excellent communication and presentation skills.

Personal Attributes:

• Detail-oriented with a strong commitment to accuracy.
• Ability to work independently and as part of a team.
• Strong organizational skills and the ability to manage multiple priorities.

- Prepare and submit technical documents, drawing and procedures to client.

- Involved with site inspection and commissioning at client premises (local or oversea shipyard).

- Manage,plan and monitor project schedule to meet contractual delivery. To ensure high levels of client satisfaction.

- Assist project manager to liaise with client and consultants on projects.

- Plan, coordinate and monitor orders and deliveries.

- Monitor in-house fabrication works to ensure compliance with approved drawing.

- Support sales team to prepare technical proposal.

- Attend technical meeting.

- Adhere to ISO Procedures and standards.

- Fire-fighting system integration experience is a plus.

- Diploma/ Degree in mechanical Engineering

- AutoCAD skills & basic computer skills (Microsoft Office - Word, Power point and Excel).

- Is a good team player and is analytical and a problem solver.

A Project Engineer, or Project Management Engineer, is in charge of planning and coordinating technical engineering initiatives to make sure they can complete a project within their budget and according to a schedule. Their duties include upholding project standards by researching compliance regulations, developing project implementation plans and adjusting specifications for elements of a project.

Project Engineer duties and responsibilities

Project Engineers manage the planning and processes of a project and delegate responsibilities to ensure the project is completed efficiently and successfully. Their day-to-day duties and responsibilities may vary depending on the type of industry, company or project they’re working on, but typically include the following:

• Conduct regular meetings with clients to ensure clarification and meet specific requirements in a timely manner.
• Delegate tasks to team members according to their individual skill sets, experience and abilities to ensure efficient completion of the project.
• Maintain budgets and make adjustments according to needs as they arise.
• Track performance and analyze the completion of key goals.
• Document and report project progress to collaborators and clients.

Key Responsibilities:

• Conduct comprehensive assessments of current production methodologies to identify opportunities for technological advancements that improve efficiency, safety, and product quality.
• Identify, evaluate, and integrate cutting-edge technologies to enhance operational efficiency, reduce waste, and ensure product quality. Present updates and results to stakeholders to showcase innovation progress.
• Plan, execute, and oversee engineering projects focused on innovating production processes through advanced technologies, ensuring timely and budget-conscious implementation.
• Implement rigorous testing protocols and quality control measures that leverage technology to uphold product safety and compliance with industry standards.
• Analyze existing processes to uncover inefficiencies, recommending innovative, cost-effective solutions that maintain quality and safety. Prepare and track budget estimates for technology upgrades and process improvements.
• Maintain detailed project records that capture design specifications, testing results, and performance evaluations, facilitating knowledge transfer and transparency in innovation efforts.
• Provide regular updates to stakeholders, emphasizing technological advancements, challenges, and overall project performance with a focus on innovation outcomes.

Job Requirements:

• Degree in Chemistry, Mechanical Engineering, or equivalent
• Minimum of 2 years in the packaging industry;
• Specialization in product development and process improvement with a strong emphasis on innovative packaging solutions.
• Proficient in Microsoft Office (Excel, Word, PowerPoint).
• Strong communication, problem-solving, analytical, planning, time-management, and multitasking skills.
• Knowledge of Project Management, Solidworks, and SAP would be advantageous.
• Excel in dynamic environments, demonstrating flexibility in response to technological changes and challenges.
• Anticipate and meet the evolving expectations of internal and external customers, striving for service excellence.
• Uphold high ethical standards, maintaining professionalism and reliability
• Collaborate effectively within teams to drive innovation and achieve business objectives.
• Monitor and track progress on innovative initiatives to ensure efficient and effective completion.

ALATAS is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry.

Alatas Crane Services operates out of 14 offices worldwide.

We offer field service repairs, inspections, overload load testing, dry-dock repair supervision, component repairs, spare parts supply, technical support as well as supply of new cranes and upgrades to existing ones.

Our multi-disciplined Service Engineers are professionals in their field and are available attend to and solve crane and deck machinery problems of any kind.

To support our Marine Crane & Deck Machinery Service operations in Singapore, we are employing experienced Senior Service Engineer - Ship Cranes as follows:

JOB DESCRIPTION:

• To carry out field service attendances to troubleshoot & repair Deck Cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

REQUIREMENTS:

The successful candidate will have solid working experience with marine crane and deck machinery makers such as:

• MacGREGOR
• IHI
• MITSUBISHI
• LIEBHERR
• TTS MARINE
• TSUJI
• HATLAPA
• PUSNES, NIPPON PUSNES etc.

THE SUCCESSFUL CANDIDATE WILL HAVE:

• Min 5 years' experience sailing as Electrical Officer on bulkers equipped with deck cranes and has carried out troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems on board,
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage
• Ship Electricians are welcome to apply.

ALATAS is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry.

Alatas Crane Services operates out of 14 offices worldwide. We offer field service repairs, inspections, overload load testing, dry-dock repair supervision, component repairs, spare parts supply, technical support as well as supply of new cranes and upgrades to existing ones.

Our multi-disciplined Service Engineers are professionals in their field and are available attend to and solve crane and deck machinery problems of any kind.

To support our Marine Crane & Deck Machinery Service operations in Singapore, we are employing experienced Senior Service Engineer - Ship Cranes as follows:

JOB DESCRIPTION:

• To carry out field service attendances to troubleshoot & repair Deck Cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

REQUIREMENTS:

The successful candidate will have solid working experience with marine crane and deck machinery makers such as:

• MacGREGOR
• IHI
• MITSUBISHI
• LIEBHERR
• TTS MARINE
• TSUJI
• HATLAPA
• PUSNES, NIPPON PUSNES etc.

THE SUCCESSFUL CANDIDATE WILL HAVE:

• Min 5 years' experience sailing as Electrical Officer on bulkers equipped with deck cranes and has carried out troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems on board,
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage
• Ship Electricians are welcome to apply.

We are seeking an experienced Cloud Penetration Testerto join our team. The successful candidate will have expertise in cloud security, penetration testing, and vulnerability assessment. The role involves identifying and exploiting vulnerabilities in cloud-based systems, applications, and infrastructure to help our organization strengthen its cloud security posture.

Responsibilities:

• Conduct cloud penetration tests and vulnerability assessments to identify security weaknesses
• Design and implement custom exploits to test cloud security controls
• Analyze cloud security configurations and identify misconfigurations
• Develop and maintain cloud security testing tools and scripts
• Collaborate with development teams to implement secure coding practices
• Provide detailed reports and recommendations for remediation
• Stay up-to-date with emerging cloud security threats and technologies

Requirements:

• 3+ years of experience in cloud security, penetration testing, or related field
• Strong understanding of cloud platforms (AWS, Azure, GCP)
• Experience with cloud security tools and technologies (e.g., CloudWatch, CloudTrail, IAM)
• Proficiency in programming languages (e.g., Python, Bash)
• Familiarity with vulnerability scanners and penetration testing frameworks (e.g., Nmap, Nessus, Metasploit)
• Possess one (or more) of the following Security certifications (would be an added advantage):
• Offensive Security Certified Professional (OSCP) certification
• CREST Registered Penetration Tester (CRT)
• GIAC Cloud Penetration Testing (GCPN)
• Candidates with 5 years or more experience will be considered for the Senior Consultant position who is able to lead projects
• Ability to collaborate with team members, executive tasks effectively and independently
• Strong analytical and problem-solving skills
• Possess good communication, interpersonal and reporting skills

Preferably with the following:

• Experience with DevOps and continuous integration/continuous deployment (CI/CD) pipelines
• Knowledge of cloud security compliance frameworks (e.g., PCI-DSS, HIPAA)
• Familiarity with containerization (e.g., Docker) and serverless computing

Work location: Jurong East

To manage and coordinate the production of quality shop drawings and BIM models in all projects assigned with minimal supervision. He/ She must be able to carry out HVAC/piping-related drawings.

• To produce 2D drawings from BIM models with accuracy ensuring drawings produced are according to the Project or the Client’s Drafting Standards and Procedures, and that the drawing submission schedule is achieved.
• Maintain proper records of all issued & received models/drawings, Clash Reports, RFIs, etc.
• BIM Register following the company’s ISO Standards and Procedures and ensuring all the drawings are completed on schedule or promptly.
• Perform regular drawing backups and housekeeping work in the directory
• The secondary role includes developing technical plans, sections, details, and 2D/3D schematic diagrams using AutoCAD and in-house software.
• Accountable for the fluent/organized presentation, content correctness/accuracy of shop drawings production in form, fit, and function through thorough coordinates with other trades and services in 2D/ 3D submission.
• Responsible for ensuring full compliance with the company’s Shop Drawings Standard Operation Procedure, including adherence to design provision/scope of work according to contractual obligations.
• Generate a clash report based on the Matrix provided
• Work under the supervision of the Project Manager and perform the work tasks assigned.

Experience / Skills

• Degree/ Diploma in Mechanical Engineering or other relevant disciplines.
• Preferably with a minimum of 2 years of working experience in space planning, and design coordination, preferably on different scales of projects within engineering design consulting business.
• Having good knowledge of software such as Revit, and AutoCAD.
• Knowledge in Isometric drawings, LOD 350, and Plant 3D will be added advantages
• Good planning skills in managing modeling and drafting work.
• Possess strong initiative, and ability to work independently and within a team environment when required.
• Good interpersonal, written and verbal communication skills.

We regret that only shortlisted candidates will be notified.

The Reliability Engineering Automation team prides itself in keeping Visa systems up and secure, catering to the 24*7 needs of the business. The team uses AI to aggregate observational data (from monitoring systems output, job logs, syslog, etc.) and data from ticketing, incident, and event management system data to produce a virtuous circle of continuous insights yielding continuous improvements and fixes The Staff Software Engineer, a highly motivated senior experienced individual contributor, responsible for innovative planning, designing and developing effective solutions in accordance with industry standards on best web development practices. As part of the team, you will be required to own key modules, perform code and design AI architectural reviews, suggest best practices and implement design and development standards. The role is a senior consultant who has the passion to solve problems, factor old codes, learn and pick up new technologies like generative AI, chatops, LLM, Onprem models. Model QA. The role will also be required to lead implementations on key modules and mentor junior team members,

Responsibilities:

• Have the passion in developing and supporting the growth of the next generation software architectures and inspire innovation within the team
• Develop scalable real-time low-latency Artificial Intelligence processing solutions in an agile delivery method
• Lead and guide the team in AI design, code and implement new algorithms to solve complex problems
• Develop AIOPS solutions using available tools and technologies and assist the global team in problem resolution by hands-on participation.
• Engage technical workshops with cross-vertical Technology partners for cross-vertical integration in software development

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Purpose of the Role

The Engineer, Inspection has a critical role in ensuring that ARLANXEO's plant equipment is maintained to a high level of reliablity via the proper use of Maintainence and Engineering Standards and Codes. Her/his objective will be to ensure compliance with safety standards, local legislation, statutory requirements and regulations as well as Corporate guidelines while performing related duties and all other related works.

Job Description

• Manage and perform all static equipment inspection (pressured equipment, piping, PSV, etc).
• Manage PVMS to MOM CLA extension scheme and Steam/Air equipment RBI.
• Response to plant requirements to mechanical inspection for static and safety devices, Promptly and timely response to requests for assistance to meet execution team expectations
• Provide technical expertise to identify and make recommendation to solve static equipment problems either directly or through accurate identification of a problem and participating with functional engineering team in problem solving.
• Propose improvements of static equipment installation and utilize the LMS management of Change (MOC) process including proper documentation of the change.
• Lead in Static Equipment inspection scoping in major shutdown and turnaround.
• Support unscheduled/emergency or schedule plant shutdown/turnaround as required.
• Support Go-live, deployment and usage of IDMS and Future RBI initiatives.
• Liaise with maintenance planner, engineers and others supervisors to improve PM schedules.
• Supervise the contractor’s work in the facility or shop to guarantee safety and quality and reliability of work.
• Perform Root Cause Analysis of failures and develop counter measures to prevent future failing of Equipment.
• Develop work procedures in the area of responsibility.

Requirements

• Degree in Mechanical Engineering with at least 5 years’ of maintenance experience in Oil & Gas / Petrochemical or Chemicals industry.
• Industrial Certifications: API510, API570, AWS-CWI.
• Skilled in Materials selection, Material Degradation Mechanisms and NDT
• Working knowledge of API/ASNE/ASTM/TEMA.
• Familiar with PI, Microsoft Office, Project, Outlook and SAP systems.
• Self-confident and able to work independently with minimum supervision but also, a good team player.
• Good interpersonal, analytical, troubleshooting and problem solving skills.

Job Description:

• The incumbent shall thrive as part of the performing sales team and will be responsible to attain the set team/individual sales budget, with revenue from product based, leasing and/or solutions-based sales.
• Possess strong sales management skills including but not limited to, tracking and attainment of sales revenue / margin based on forecast, negotiation skills to address all parties’ needs to obtain win-win status, account servicing skills with return customers / account receivable mindset.
• Build and maintain new / existing customers bases through strong market knowledge, strong partnership and engagement.
• Liaise closely with Service Operations teams to ensure reliability, availability and serviceability.
• Maintain team-based spirit with continuous market data and customer information exchange among the team to bring strong value to the Organization and Sales Dept.

Experience, Skill and Competency required:

• 1-3 years of pre-sales, technical sales or sales of construction equipment (such as Forklift, Excavator, Drilling Rig, Crawler Cranes) in construction / engineering industry. Interested applicants who do not possess construction equipment sales background but have ability to demonstrate the competency to be successful on this role, are welcome to apply.
• Candidates with Diploma in Engineering related background will have an advantage.
• Entail strong problem-solving mentality to anticipate customers’ enquiries, help them find solutions and create good value to the business partnership.
• Demonstrate persistency, consistency and adaptability to strive for success.
• Exhibit good negotiation and communication skills to manage all parties’ interests.
• Possess self-motivation and confidence to excel in various business scenarios.
• Possess own car and with valid Singapore Class 3 driving license.

Objectives of this role

• Design visual concepts using appropriate tools, media, and/or technologies
• Incorporate relevant branding, marketing, and communication strategies in designs
• Complete design projects on time and within the designated budget

Responsibilities

• Communicate design concepts and pitches to relevant stakeholders
• Collaborate with creative teams for cohesive deliverables
• Time-manage multiple projects and keep stakeholders updated on progress
• Consistently deliver creative solutions for visually based problems or needs

Required skills and qualifications

• Portfolio of high-quality professional work and project samples (for entry-level role, academic portfolio is acceptable)
• Mastery of foundational design concepts and visual principles
• Proficiency with the techniques, tools, and technologies necessary for outstanding design work
• Ability to think critically, communicate effectively, and produce work within deadlines

Preferred skills and qualifications

• Bachelor’s or associate’s degree in design or art-related field
• Two or more years of experience in a design role
• Certification and/or training in relevant software programs

Job Responsibilites

• Prepare Master Program and update progress monthly.
• Prepare Progress forecast of rolling programs and update of resources.
• Resolve any instrumentation issues & recording.
• Coordinate with services department about diversion work and schedule.
• Ensure overall site progress are updated according to schedule.
• Prepare monthly progress report for client/consultants.
• Assist Project Manager in the preparation and submission of verified work done to Quantity Surveyor.
• Any other adhoc duties as assigned by management.

Job Requirements

• Possess a Degree Civil Engineering and above or equivalent.
• At least 5 years of experience in construction planning and programme coordination for railway projects.
• Computer literate with proficiency in planning software such as Microsoft Project, AutoCAD, P6 Primavera.
• Experience in LTA Projects will be advantage.
• Willing to be based at project site office and work 5.5 days.

Career Highlights:

• Competitive compensation benefits
• Career growth opportunity
• Company’s transport available.

Job Description:

• Quantity measurement of the following trades:

- Structural works.

- Piping works.

- Electrical and instrumentation works.

- Mechanical and equipment works.

- Painting works.

• Reconcile MTO with the client.
• Monitoring changes on-site with production teams. It could be identified in the following:

- Design drawing changes.

- Site instruction from Client.

- Job Confirmation Sheet from client.

- Identification of Changes (IOC) from Production Team.

- Confirmation of Verbal Instruction (COVI) from Production Team.

• Compiling change proposal register.
• Preparation & submission of change proposal to Client for approval.
• Reconcile with Client on the change proposals submitted.
• Project Costs Control:

- Design drawing changes

- Monitoring periodically on the increased or decreased in works scope.

- To handle any Commercial Claims (i.e. Extension of Time, disputed claims, etc)

• Contracts Management:

- To ensure that our works & costs are in-line with the contract.

- Able to identify variance arises in the contract.

- To manage any disputed items.

Job Requirement:

• Degree in Civil Engineering, Quantity Surveying or relevant courses
• Min 3 years of experience in QS
• Able to handle full-scope of QS duties which includes material take-off and variations

Job Description:

- Design, develop, and improve sheet metal products and engineering processes

- Assist to create and review technical drawings, plans, and specifications using computer software

- Perform detailed documentation to track project development and design process

- Develop testing processes, and perform testing and validation of new designs

- Taking part in idea generation and improvement of existing products and machinery.

- Able to work with team members for the overall progress of the project and able to cope with fast paced learning environment - Prepare and perform unit beta testing and data recording

- Ability to be independent, innovative and creative

Skills and Academic Requirement:

- Bachelor's Degree/Diploma in Mechanical Engineering/Computer Engineering or in related field

- Solid Experience with AutoCAD and Solidworks

- Firm grasp of engineering concepts, and keen in designing mechanical systems and products

- Exceptional technical and problem-solving skills and reasoning ability

- Ability to communicate effectively and clearly

- Must be self-motivated and a great team player

We do not require recruitment agencies, please do not contact us. Thank you!

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Primary Purpose:

Functions as a senior technical specialist or in a lead role in mechanical design. Works independently and applies advanced engineering techniques and analyses for problems and methods.

Responsibilities:

• Concept, Functional, Preliminary and detailed design of mechanical process systems for water and wastewater treatment plants, including screening equipment, physical-chemical treatment plants, biological treatment plants, blower equipment, odour control plants, disinfection plants and sludge treatment plants
• Concept, Functional, Preliminary and detailed design of various pumping systems for water, wastewater and sludge treatment plants
• Concept, Functional, Preliminary and detailed design of ancillary systems including chemical feed systems, mechanical ventilation systems, and drainage systems
• Preparation of General Arrangement and equipment layout drawings
• Preparation of mechanical process equipment and pump specifications
• Mechanical equipment and pipe sizing and calculations
• Review and evaluation of vendor submissions
• Coordination with other disciplines e.g. civil, structural, electrical, building services, and instrumentation & control designers
• Lead meetings, discussions with clients, contractors and vendors
• Provide engineering support for bids & proposals
• Provide engineering support during construction
• Provide engineering support during testing and commissioning
• Provides project cost estimates to client
• Design management and project management of proposals and projects where the scope is primarily mechanical / process

Preferred Qualifications

• A Professional Engineer (PE) registered with Professional Engineers Board Singapore or Chartered Engineer
• Possess a university engineering degree (mechanical)
• Candidate shall have minimum of 10-15 years’ experience in the mechanical design of wastewater treatment (municipal and industrial)
• Able to work independently in producing the project deliverables to meet project timeline
• Leads and guide a team of engineers and carries out QA/QC work on their designs
• Proficient in written and oral communication with good interpersonal skills

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Source and identify suppliers for direct/indirect materials/services to expand supplier base and for new project/production needs;
• Obtain quotes from newly source suppliers to provide costing and cost reduction;
• Lead in conducting periodic price negotiation with suppliers to ensure competency in cost for materials/service;
• Develop and negotiate favorably supply agreement with suppliers;
• Work with Engineering/Unit Sales to analysis Sales Contract’s scope of supply and provided Sales Contract BOM Cost to Management;
• Support in providing Project Costing;
• Other ad-hoc duties as assigned.

Requirements:

• Diploma or Degree in Mechanical Engineer/HVAC in or equivalent;
• Proficiency in both written and spoken in English and Mandarin as to liaise with relevant Mandarin speaking counterparts;
• Excellent organization problem solving and negotiation skills.

Job Description:

· Developing and managing operational activities, including the monitoring of Workplace Safety and Health (WSH) strategies, and overseeing manpower, financial and resource plans.

· Day to day repair and maintenance job arrangement and yard operation management.

· Manage cost, quality and schedule, as well as health, safety and environmental activities for the site.

· Maximise productivity within the maintenance environment through sound scheduling and planning.

· Supervision the office team and review the job card and overtime to ensure all jobs are recorded and billed accordingly.

· Review invoices, quotation and efficiency of workers in perform their repair works.

Requirements:

· Minimum 2-3 years experience in heavy machinery industry.

· Technically background of Heavy machineries.

· Strong analytical and problem-solving abilities.

· Excellent communication and interpersonal skills.

Job Description:

1. Provide support to manager on day-to-day work and operations

- Prepare, handle and maintain all sensitive and confidential information including meeting agenda, detailed minutes of meetings, documentation. (for statutory and non-statutory requirements), contracts and reports (financial and non-financial)

- Assist in reviewing and preparation of purchase order, quotations, invoicing and processing of payments weekly.

- Plan, organize, prepare for meetings and discussions – internal and external, online and offline.

- Ensure timely follow up on outstanding matters and with relevant parties for efficiency.

- Be point of contact for internal and external communications, coordination and correspondences with relevant parties.

2. Provide support in business processes

- Coordination, monitoring and communication of ongoing and new projects and tasks with relevant department, or external parties such as customers and suppliers.

- Administrative support on data entry and data-imaging for sorting, filings and/or retrieving of corporate records, business documents and/or reports.

3. Ad-hoc assignments – as and when assigned

Requirements:

1. Able to work independently and self-driven.

2. Professional proficiency level in verbal and written communication skills.

3. Good understanding on Teams / Zooms functions.

4. Good understanding on the entire MS Office.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule