Total 7,122 Engineering job vacancies in d04 harbourfronttelok blangah sentosa island

Maintenance Engineer (WDA) - 2 Years Contract

• Based in Singapore, the regional hub for Asia Pacific (AP) and top-ranked biopharmaceutical company on the Straits Times and Statista’s list of Best Employers in Singapore for two consecutive years (2020, 2021).
• Join the premier biopharmaceutical company that has been in Singapore for more than 25 years and in AP for over 60 years.

Reporting to the Engineering Manager, the Engineer will be joining a two-year WDA training program. The WDA program aims to support those who is willing to take up traineeship opportunities in biopharmaceutical sector. These traineeships will help candidates develop their skills professionally, equip them with valuable industry experience and allow them to gain a firmer foothold in the job market across various sectors.

WHAT YOU WILL DO

Responsibilities include, but are not limited to:

• Provides support to maintenance manager and maintenance technician to complete planned work activities timely, efficiently and satisfactorily.
• Participate and lead in Quality/Safety related investigation. Ensure the deviations are fully investigated with any actions effectively implemented within agreed time frame.
• Develops standard operating procedures (SOP's), Job aids and preventative maintenance (PM's) plans. Ensure the developed instructions are compliance with regulatory requirements and company guidelines and standards.
• Provides technical oversight and support maintenance technicians with troubleshooting and diagnostic of equipment failure and determining the root cause and perform immediate corrective actions.
• Coordinates and support equipment shutdown, startup, swing over, and equipment servicing and inspection with stakeholders. Support installation, modification, testing, servicing, commissioning, qualification activities (IQ, OQ), as well as site change control procedures or minor projects.
• Supervise and oversee third party contractors, vendors and service providers.
• Participates in the improvement initiatives to enhance equipment or system efficiency, reduce energy usage and other cost saving/avoidance projects.
• Participate in SHE, Business Compliance, cGMP and all other compliance-related matters, where applicable

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Bachelor or Master’s degree or its equivalent can be considered if the candidate demonstrates strong willing to work and learn in engineering and project management.
• Minimum 1 years of relevant working experience
• Experience in project management, maintenance and/or engineering in manufacturing, oil & gas or semi-con industry will be an advantage.
• Ability to work independently.
• Good interpersonal and communication skills

We are proud to be a company that embraces the value of bringing diverse, talented, and committed people together. The fastest way to breakthrough innovation is when diverse ideas come together in an inclusive environment. We encourage our colleagues to respectfully challenge one another’s thinking and approach problems collectively. We are an equal opportunity employer, committed to fostering an inclusive and diverse workplace.

• Effective leadership of all operational staff in Singapore including efficient manpower planning, ensuring technical competence of staff and monitoring of technical performance.
• Leading change and development within the SD function to meet future business demands to improve Lloyd's Register's competitive position.
• Ensuring that structures, processes, and procedures are coordinated and effective in meeting the business/commercial requirements for both internal and external clients.
• Liaising with SD counterparts to ensure consistency in development and delivery of services and application of best practices.
• Ensuring external and internal client expectations are understood and that the services offered meet these expectations and remain in accordance with technical, regulatory requirements and processes.
• Ensuring excellent service to internal and external customers in accordance with established quality standards and in compliance with the requirements of the Group Management System.
• Dealing with business queries and build relationships with internal and external clients, as appropriate, to resolve service problems and build the business.
• Mentoring and coaching team members, as appropriate, to achieve effective knowledge transfer and application.
• Delivery of operational financial performance against agreed targets.
• Delivery of non-financial performance against established metrics and targets.

Roles & Responsibilities

· To perform field support activities both in Company premises as well as on site, I.e. to perform engineering work such as dismantling, maintenance, repair, overhaul & installation works.

· In the course of work, he must ensure his work adheres to the required security, safety & quality standards in the company. He needs to co-ordinate job activities to consistently meet timeline, customer job requirements and statutory regulations. And, to prepare service reports upon completion of jobs.

· Secondary appointment is to perform collection and delivery of goods from and to the Customers’ locations, physical check of collected and delivered platforms, liaising with customers and other tasks as and when required by his Supervisor.

• Others ad-hoc duties as assigned

Requirements:

· Able to read and understand English

· Able to use basic hand tools, power tools, production equipment related to assembly trade such as torque wrench & lifting equipment

· Able to operate basic workshop equipment like drilling, welding, grinding

· Must be open to commit for OT

· Class 3 Driver’s License is an advantage

The School of Mechanical and Aerospace Engineering (MAE) at NTU Singapore is a top 11 Mechanical and Aerospace Engineering School in the world. With well-established industry partnerships, MAE provides an active and vibrant research environment with excellent R&D infrastructure and numerous opportunities for research funding. The school has an enrolment of over 2500 undergraduate students with over 90 faculty members and 140 full-time research staff working in well-equipped state-of-the-art laboratories. A growing research student population of over 400 is also actively engaged in strategic research and development work.

We invite highly qualified candidates in the relevant expertise areas to join our dynamic team of faculty.

Surface Engineering, Metrology, Precision Engineering

Candidate Profile:

• Possess relevant Bachelor and PhD degrees from reputable universities.
• A good research track record, and postdoctoral experience would be advantageous.
• Teaching experience at either undergraduate or graduate levels will be an advantage.
• Research intersects the multidisciplinary field of Surface Engineering, Metrology, and Precision Engineering.
• Expertise in Advanced Surface Engineering, Surface Metrology, Surface Science and Characterization
• And/or Expertise in Advanced Engineering Metrology, Mechanical Metrology, Dynamic Metrology.
• And/or Expertise in Advanced Precision Engineering, Precision Metrology, Precision Optical Systems.
• And/or Expertise in Translational research work with Industry on AI/ML applications.
• Successful candidates are expected to teach at both undergraduate and graduate levels, supervise graduate students and undergraduate projects. Candidates on tenure-track are expected to conduct high impact research and acquire competitive research grant and funding to sustain an active research portfolio.

We Provide:

• An active and vibrant research environment
• Excellent R&D infrastructure and opportunities for research funding
• Well-equipped state-of-the-art laboratories
• Attractive research start-up grants and PhD student scholarships
• A competitive remuneration package and attractive benefits

Job Responsbilities

• Prepare of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Perform technical proposal c/w PFD, P &ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design &calculation and sequence of operation)
• Assist to source new product technical evaluation

Job Qualifications

• Degree in Chemical/ Mechanical/ Electrical Engineering
• Strong technical knowledge (i.e. Process Design and calculation) in membrane (MF/UF/RO/MBR), Ion Exchange (2B3T, MB, CPU, EDI) and pretreatment processes (coagulation/ flocculation, sedimentation, clarification, filtration)
• Relevant project management / plant testing & comissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details

Roles & Responsibilities

PG Engineering Pte Ltd is looking for a competent Project Engineer for process and construction & industrial projects in island wide. The project engineer is responsible for and required to be the core interface with the Team in support of our Client, and to ensure the highest level of service to our Client. The project engineer will oversee, monitor and coordinate the project to ensure it is completed on or before time, to budget and to the specified quality standards and coordinate with project managers.

From our Singapore office we currently provide a range of project management services to International Corporations and Government entities including the following:

• Strategic Project Definition and Advisory Services;

• Client Representative Services;

• Due Diligence studies;

• Cost and Budget;

• Planning and Programme Management;

• Project Management;

• Design Management;

• Procurement Management;

• Construction Management;

* Management handling with upgrade;

* Management control c/w procurement and overall projects team;

Job Responsibilities:

The role involves the execution of duties to the highest possible standards. Your primary responsibility will be to lead and perform all of the activities necessary to plan, procure, manage and administer all issues related to power & construction and industrial site work.

Your duties will involve working closely with project staff and contractors across multiple technical disciplines requiring the supervision of numerous simultaneous tasks to meet very specific and immovable milestones. You will be privy to confidential information by necessity.

You will treat all such information with the highest levels of confidentiality and will perform your role with integrity and honour at all times.

It is expected that the Project engineer role will require, but not be limited to the following key functions:

• Planning/Scheduling

• Implement a high-level effective project management framework and method statement, incorporating necessary review processes as required

• Review the master programme and other reports to ensure timeline is met

• Secure resources, suppliers, product for the Client as required

• Monitor the design, construction, and dismantling programme and identify opportunities for improved delivery

• Risk Management

• Proactively identify potential problems, conflicts, design and delivery issues using risk management tools and skills to mitigate impact on the project

• Identify Health and Safety issues and to report as per procedure

• Site, Oversee the effective operation of the activities related to the P&C Contracts through conducting regular site visits and quality checks

• People, Manage and direct the P&C team to provide overall superintendence and ensure that the project team staff, contractors, etc., work well and provide a supportive environment for the achievement of the project

• Holding weekly staff meeting with P&C team, monitoring and reviewing staff working hours and writing performance reviews for P&C staff

• Contract Management • Negotiate and convert contracts as required by the project

• Oversee the award of contracts and ensure the client is adequately protected

• Scheduling, minuting and issuing various project meetings and ensure minutes are actioned in a timely manner

• Provide regular and accurate reporting on the project progress, costs and quality

• Review and oversee the management of all P&C contracts and ensure that there are no major gaps or issues in providing the required P&C deliverables

• Monitoring and reviewing all P&C work instructions and variations ensuring that all information is accurate, recorded and follows the designated project approval process

• Manage and document changes/variations following approval by Client • Ensure contractors and consultants are paid in accordance with contract schedules

• Review any procurement requirements and provide all necessary P&C technical support to the procurement process • Client Management

• Take the leading role in interfacing with the Client and contractors on all P&C matters at all project stages

• Actively seek and implement strategies to improve the client’s position in regard to return and value

• Identity and resolve disputes quickly and reasonably

• Develop and maintain excellent relationships with Client, authorities, consultants, contractors and adjoining property owners/stakeholders

• Reporting

• Monitoring, reviewing and implementing appropriate document control processes in line with quality control procedures

• Preparing monthly status report input on all P&C activities and including a detailed analysis of power consumption and utilization

And any other work-related tasks or duties deemed required and assigned by the line manager.

Job Requirements:

• Electrical & Mechanical Engineering qualification with minimum 6 -10 years relevant experience

• Master Degree in Electrical / Mechanical systems in the relevant field in the process & construction industry

• Contract administration experience

• Excellent overall knowledge of most P&C systems, Knowledge in innovative components introduce and handling.

• Knowledge in electrical power distribution, Smart DB’s, PLC / SCADA programming

• Experience working in construction & industrial design firms

• Manage and coordinate the inputs of project stakeholders to ensure the successful delivery of the project

• Assess and resolve site planning and coordination issues

• Apply quality management principles and processes

• Possess a keen eye on detail to deliver the highest quality of standard

• Apply risk assessment and management principles and processes

• A capacity to communicate professionally and confidently with a diverse range of people at all levels

• Strong written communication skills, with a demonstrated ability to draft reports, minutes, correspondence, procedures, processes and forms

• Sound literacy in computer software, including the Microsoft Office range. Excellent knowledge of Word and Excel • Ability to read technical drawings

• Ability to work with limited supervision

• Flexibility and ability to work with different areas of the business Punctuality with attendance and with delivering tasks on time.

Project Manager (Maintenance & Consturction)

Occupation Manager, Project (process & Construction)

Job Description & Requirements

PG Engineering Pte Ltd is looking for a competent Project Manager cum Manager (P&C Manager) for Process & Construction and industrial projects in island wide. The project manager is responsible for and required to be the core interface with the Team in support of our Client, and to ensure the highest level of service to our Client. The project manager will oversee, monitor and coordinate the project to ensure it is completed on or before time, to budget and to the specified quality standards.

From our Singapore office we currently provide a range of project management services to International Corporations and Government entities including the following:

• Strategic Project Definition and Advisory Services to maintenance & projects

• Client Representative Services;

• Due Diligence studies;

• Cost and Budget;

• Planning and Programme Management;

• Project Management;

• Design Management;

• Procurement Management;

• Construction Management;

* Management handling with upgrade;

* Management control c/w procurement and overall projects team;

Job Responsibilities:

The role involves the execution of duties to the highest possible standards. Your primary responsibility will be to lead and perform all of the activities necessary to plan, procure, manage and administer all issues related to power & construction and industrial site work.

Your duties will involve working closely with project staff and contractors across multiple technical disciplines requiring the supervision of numerous simultaneous tasks to meet very specific and immovable milestones. You will be privy to confidential information by necessity.

You will treat all such information with the highest levels of confidentiality and will perform your role with integrity and honour at all times.

It is expected that the P&C Manager’s role will require, but not be limited to the following key functions:

• Planning/Scheduling

• Implement a high-level effective project management framework and method statement, incorporating necessary review processes as required

• Review the master programme and other reports to ensure timeline is met

• Secure resources, suppliers, product for the Client as required

• Monitor the design, construction, and dismantling programme and identify opportunities for improved delivery

• Risk Management

• Proactively identify potential problems, conflicts, design and delivery issues using risk management tools and skills to mitigate impact on the project

• Identify Health and Safety issues and to report as per procedure

• Site, Oversee the effective operation of the activities related to the P&C Contracts through conducting regular site visits and quality checks

• People, Manage and direct the P&C team to provide overall superintendence and ensure that the project team staff, contractors, etc., work well and provide a supportive environment for the achievement of the project

• Holding weekly staff meeting with P&C team, monitoring and reviewing staff working hours and writing performance reviews for P&C staff

• Contract Management • Negotiate and convert contracts as required by the project

• Oversee the award of contracts and ensure the client is adequately protected

• Scheduling, minuting and issuing various project meetings and ensure minutes are actioned in a timely manner

• Provide regular and accurate reporting on the project progress, costs and quality

• Review and oversee the management of all P&C contracts and ensure that there are no major gaps or issues in providing the required P&C deliverables

• Monitoring and reviewing all P&C work instructions and variations ensuring that all information is accurate, recorded and follows the designated project approval process

• Manage and document changes/variations following approval by Client • Ensure contractors and consultants are paid in accordance with contract schedules

• Review any procurement requirements and provide all necessary P&C technical support to the procurement process • Client Management

• Take the leading role in interfacing with the Client and contractors on all P&C matters at all project stages

• Actively seek and implement strategies to improve the client’s position in regard to return and value

• Identity and resolve disputes quickly and reasonably

• Develop and maintain excellent relationships with Client, authorities, consultants, contractors and adjoining property owners/stakeholders

• Reporting

• Monitoring, reviewing and implementing appropriate document control processes in line with quality control procedures

• Preparing monthly status report input on all P&C activities and including a detailed analysis of power consumption and utilization

And any other work-related tasks or duties deemed required and assigned by the line manager.

Job Requirements:

• Electrical / Mechanical Engineering qualification with minimum 10 -15 years relevant experience

• Master Degree in Electrical / Mechanical systems in the relevant field in the power & construction industry

• Minimum 10 years’ project management experience, including minimum of 5 years’ experience in Singapore.

• Contract administration experience

• Excellent overall knowledge of most P&C systems, Knowledge in innovative components introduce and handling.

• Knowledge in electrical power distribution, Smart DB’s, PLC / SCADA programming

• Experience working in construction & industrial design firms

• Manage and coordinate the inputs of project stakeholders to ensure the successful delivery of the project

• Assess and resolve site planning and coordination issues

• Apply quality management principles and processes

• Possess a keen eye on detail to deliver the highest quality of standard

• Apply risk assessment and management principles and processes

• A capacity to communicate professionally and confidently with a diverse range of people at all levels

• Strong written communication skills, with a demonstrated ability to draft reports, minutes, correspondence, procedures, processes and forms

• Sound literacy in computer software, including the Microsoft Office range. Excellent knowledge of Word and Excel • Ability to read technical drawings

• Ability to work with limited supervision

• Flexibility and ability to work with different areas of the business Punctuality with attendance and with delivering tasks on time.

Job Description / Responsibilities:

• Ensure compliance to statutory and corporate requirements related to safety and HSE issues.
• Assist the Manager to coordinate with all Departments on technical matters.
• Prepare data and report on new technology or equipment for plant upgrading and process improvement.
• Analyze process data to determine variations in production conditions, and carry out test runs for plant optimization.
• Advise Production on technical matters and assist in troubleshooting of plant problems.
• Initiate and implement approved Job Orders to enhance process safety, optimize production cost, and improve production quantity and quality.
• Develop and co-ordinates plant modifications and expansion projects, and assist in installation and commissioning of new facilities.
• Conduct periodic mandatory HAZOP study and follow up on any other technical matters in the plant.

Qualification:

• Degree in Chemical related fields.
• Fresh Degree holders are welcome to apply.

Job Requirements

1) To work as supporting Process Design Engineer to Project Lead Process Design Engineer

2) To co-ordinate with Process Designer to Prepare PFD & P&IDs

3) Perform Hydraulic calculations, surge analysis, Wastewater calculation, Firefighting calculation

4) Perform Tank Venting Calculation as per API 2000

5) Perform TRV and PSV Sizing Calculation as per API 520 & API 521

6) Prepare Tank Operating Level Calculation

7) Prepare Heat & Material Balance

8) Perform Heat Transfer Calculations

9) Prepare Material Selection Diagram

10) Prepare Process Line List, Product Data sheet

11) Participate in HAZOP / SIL Study and close out HAZOP / SIL Action sheets

12) Prepare Design Basis & System Description

13) Prepare Pollution control report and Fire safety report

14) Perform Tank emission calculation

15) Prepare Process data sheets for Equipments like pumps, Heat Exchangers, Refrigeration unit, Flare, Boilers, Oil Water Separators, Vessels

16) Prepare Process data sheets for Instruments like control valves, MOVs, Pneumatic actuators, Level Transmitters, Pressure Transmitters, Temperature Transmitters, Flow meters etc.

17) Prepare Process Control Philosophy & ESD Philosophy

18) Prepare Cause & Effect Diagram

19) Prepare Commissioning Procedure & Operation Manual

20) Review Vendor Documents for Process related information

21) Review Plot Plan, Piping Layout, Instrument Data Sheet, Equipment Data Sheets for Process related information as Inter Discipline Check

22) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

23) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Software Requirements

1) Pipe Net

2) Good proficiency in MS Excel, MS word, MS Power Point

3) Smart Plant P&ID

4) Autocad

Code Knowledge

1) API 2000, API 520, API 521, API 2350

2) SS 532

3) NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Qualification

Bachelor of Engineering (Chemical)

Experience

4 years to 7 years

* Only Shortlisted Candidates Would Be Notified.

• Design : Develop mechnical design and simulations for new projects and exisitng projects, Developing concepts for new machines and Robot cell for automation Projects.
• Robot Programming: Robot teaching traning will be provided, Engineer need to handle Robot programming if required.
• Documentation: Maintain Project records and reports to track results, and observations.
• Collaboration: Work closely with global cross-functional teams,engineers, and technicians, to achieve project goals and objectives.
• Presentation: Prepare and deliver presentations on your findings and progress to the team

Job Responsibilities:

• Knowledge in understanding the Schematic Diagram.
• Report to the production manager regarding of the progression.
• Performing the electrical wiring, termination, installation as per drawing for control panel, instruments and machine.
• Troubleshooting, testing and commissioning (electrical part).
• 1 - 3 years of relevant working experience in handling the forklift.
• Preferably to have experience in electrical , shipyard, oil and gas and petrochemical
• Able to work independently and proactively and work under fast pace environment.

You will be partnered with clients in conducting factory inspections to ensure the quality of their products and processes. The work involves inspecting manufacturing processes on clients’ premises and providing sound recommendations on compliance to standards. The position liaises extensively with internal colleagues from the certification and testing department in delivering one-stop international compliance management service.

Key Responsibilities:

• Conduct factory / project site inspection and perform regular product sampling according to certification requirements
• Review manufacturers' quality management system in accordance with national / international standards
• Generating and issuing audits reports
• Conduct evaluation of inspection and test reports
• Process applications for the certification of fire protection products and materials
• Other duties as assigned by the Supervisor

Key Requirements:

• Degree or Diploma in Building and Estate Management or Mechanical Engineering with at least 3 years of relevant working experience, preferably in quality assurance
• Entry level applicants are welcomed to apply
• Knowledge of ISO 9001, internal auditing, national / international product standards and work experience in building industry will be an added advantage
• Able to multi-task independently and thrive in a fast-paced environment
• Meticulous with ability to handle highly confidential issues as well as communicate effectively with all levels
• Willing to travel overseas for work assignments

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives. Our dedication to excellence and our strong track record have earned us a distinctive reputation for quality and trust as an integrated engineering group, spanning across the aerospace, smart city, defence and public security segments.

Collaboration is key to our success. We prioritize open communication, constructive feedback, and a willingness to help others. We are committed to creating a supportive work environment that encourages excellence, innovation, and continuous improvement. We're looking for individuals who share our values and are excited to join us on our cyber mission.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

Job Description:

• Responsible for the creation, organization, execution, completion, and maintenance of projects
• Manage scope and quality in alignment with stakeholders and manage risks and issues along the entire lifecycle and help the team remove blockers and solve problems
• Effectively communicate and manage stakeholder expectations and provide status information regularly
• Drive detailed technical discussions and manage the team to deliver a successful implementation
• Provide effective leadership to the team in solving problems, cultivate team cohesiveness & teamwork
• Manage projects that will involve development (hardware, firmware, software) and production
• Overseeing the entire project so that all required documentation is complete

Job Requirements:

• 3+ years of project management experience
• Experience in product development and/or software development
• Familiar with network infrastructure
• Strong management skills, including coaching, team-building, and conflict resolution
• Excellent interpersonal and communication skills
• Results-oriented mindset to achieve and exceed project goals.
• Project management certification like PMP or equivalent
• ITIL and CISSP is an added advantage
• Passion to learn and able to follow processes
• Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Basic Qualifications:

• Bachelors/Degree in Computer Science or other technology field.
• Must have at least 3 years of professional production support experience in HA environment.
• Must be familiar with agile and DevSecOps principles and practices.
• Scripting experience with Windows PowerShell and Unix scripting.

Preferred Qualifications:

• 3+ years of experience with Java applications, SQL/NoSQL, Handling Production operations.
• Experience working with any log analysis tools and observability applications like Grafana, Tableau, Splunk.
• Experience with Linux and Windows administration, networking, security, and troubleshooting.
• Excellent communication, collaboration, and problem-solving skills
• Knowledge on Docker/Kubernetes, NginX, CDN, Caching
• Installing and Uninstalling various Windows and Unix/Linux applications and software experience

Basic Qualifications:

• Bachelors/Degree in Computer Science or other technology field.
• Must have at least 3 years of professional production support experience in HA environment.
• Must be familiar with agile and DevSecOps principles and practices.
• Scripting experience with Windows PowerShell and Unix scripting.

·

Preferred Qualifications:

• 3+ years of experience with Java applications, SQL/NoSQL, Handling Production operations.
• Experience working with any log analysis tools and observability applications like Grafana, Tableau, Splunk.
• Experience with Linux and Windows administration, networking, security, and troubleshooting.
• Excellent communication, collaboration, and problem-solving skills
• Knowledge on Docker/Kubernetes, NginX, CDN, Caching
• Installing and Uninstalling various Windows and Unix/Linux applications and software experience

Basic Qualifications:

• Bachelors/Degree in Computer Science or other technology field.
• Must have at least 3 years of professional production support experience in HA environment.
• Must be familiar with agile and DevSecOps principles and practices.
• Scripting experience with Windows PowerShell and Unix scripting.

Preferred Qualifications:

• 3+ years of experience with Java applications, SQL/NoSQL, Handling Production operations.
• Experience working with any log analysis tools and observability applications like Grafana, Tableau, Splunk.
• Experience with Linux and Windows administration, networking, security, and troubleshooting.
• Excellent communication, collaboration, and problem-solving skills
• Knowledge on Docker/Kubernetes, NginX, CDN, Caching
• Installing and Uninstalling various Windows and Unix/Linux applications and software experience

Job Highlights:

Location: 45 Gul Road (Daily Company Transport pickup nearby MRT: Bukit Batok/Jurong East/Boon Lay/Choa Chu Kang/Woodlands)

Working Hours: 5 days work week; Monday to Friday: 8am to 5.30pm

Duration: Permanent

Benefits: OT pay entitlement / Medical Benefits such as Outpatient,Dental,Healthscreening etc / Variable Bonuses / Company Insurances such as Personal Accident, Life Term, Surgical, Hospitalizations, Work Injury / Annual Leave / Birthday Leave / NTUC Membership

Industry: Dyna Mac is a Public Listed company in Oil&Gas, Marine Offshore Engineering.

**Good Stable Career Advancement Opportunities**

**Listed Company with Good Benefits**

**Company Transport Available**

Job Description:

• Process invoices received from suppliers and process payments
• Update invoice listing and prepare accrual listing
• Perform monthly supplier’s reconciliation
• Perform bank reconciliation
• Prepare invoice to client
• Prepare backcharge invoice subcontractors and update COR register
• Other ad-hoc duties as assigned

Job Requirement:

• Degree / Diploma in Accounting or A levels with working experience.
• At least 3 to 5 years of accounting experience.
• Meticulous, positive mindset and possess "Can-do" attitude.
• Hardworking, meticulous and able to take on ad-hoc tasks from time to time.
• Experience in Marine/Shipyard or Construction industry is advantageous (but NOT a must).

• Green Marine Solution
• Basic $3000 - $4500
• 5 days (Office Hours)
• Located at Penjuru Lane
• 2 ways transport from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Develop green marine solutions that reduces marine carbon footprint, in line with company business objectives.
• Hands on in setting up of test lab to enable development and testing.
• Perform PLC software and algorithm development for electrical propulsion solutions.
• Generate documentation of software architecture and logic flow, test procedures, quality control and any other necessary supporting documents.
• Participate and support commissioning of vessels with similar configurations.
• Troubleshoot and resolve any issues related to our delivered solutions that may arise during the vessel commissioning.

Requirements

• Min Engineering Degree in relevant discipline.
• Strong software development skills particularly in equipment controls.
• Strong analytical and troubleshooting skills.

**Only shortlisted candidate would be notified**

EA Reg. No: R32116143

• Provide driving service in/out of workshop
• To shift vehicles in and out of workshop for repair and services after registration at counter
• To send vehicle to LTA inspection
• To arrange and park vehicle properly and orderly in docking area
• To conduct road test for vehicle as required
• To assist in handling/taking over of courtesy vehicle
• To assist in checking courtesy vehicle status
• To assist in collection and sending vehicles outside workshop
• To ensure docking area tidiness and cleanliness
• To assist Service Department with adhoc trips such as collection of payment/spares
• To assist in washing/cleaning of Service Department courtest vehicle

Requirements

• Class 3 & 4 Driving License

Job Description

• Manage Day to day operations
• Monitor system performance, troubleshoot issues, and implement necessary fixes or enhancements.
• Conduct regular system health checks and capacity planning to anticipate and address potential bottlenecks.
• Implement security best practices and ensure compliance with industry standards.
• Collaborate with vendors and technical support teams to resolve complex technical issues.
• Document system configurations, processes, and procedures for knowledge sharing and future reference.
• Improves operations by conducting systems analysis and recommending changes in policies and procedures.
• Protects operations by keeping information confidential and secure.
• Provides information by collecting, analyzing, and summarizing development and service issues.
• Accomplishes engineering and organization mission by completing related resultsas needed
• Perform scheduled maintenance and prepare maintenance documentation including preventive maintenance checklists, work instructions and reports
• Weekly 3 days Site Visit
• Supervise Site activites
• Experienced in civil works

Responsibilities

• Desktop support
• Provide basic support and troubleshooting to our staffs, such as password resets, printer configurations, break/fix instructions, support routing and escalation to L2 support.
• Taking ownership of staffs issues reported and tracking them through resolution
• Responding in a timely manner to service issues and requests
• Liaise with third party vendors to coordinate issues on specific services.
• Liaise with product manufacturers for problem escalation and resolutionYou will be responsible for the end-user’s hard and software related issues as well as our corporate information systems.

Requirements

• Higher Nitec or Diploma in Computer Science/Information Technology.
• Good knowledge on computer networks.
• Strong analytical and problem-solving skills.
• Good understanding and possess troubleshooting know-how on IT infrastructure and software.
• Able to handle sensitive information in confidential manner.
• At least 2 years of IT related working experience.

Job Highlights

• Permanent Position
• Competitive salary and benefits package
• Opportunity to work on exciting and challenging projects
• Great opportunities for learning & career advancement
• Transport provided at Tuas Crescent MRT

Responsibilities:

• To perform engineer’s role on method statement, implement cost & time efficiency on operation and supervise site works compliances and inspection requirement
• Carry out daily site supervision, coordination, and quality assurance of all trade’s implementation on site
• Work closely with sub-contractors on project progress and ensure timely work arrangements
• Keep track on variation and claims of contract and cost impact and feedback information to Senior Engineer/ Project Manager
• Checking plans, drawings, and quantities for accuracy of calculations
• Scheduling materials and equipment purchases and deliveries
• Liaise with consultant and carry out site inspection
• Attend weekly or monthly meetings with sub-contractors on work progression and prepare monthly meeting progression report
• Providing technical advice and solving problems on-site
• Arrange site inspections and regular site meetings
• To meet with customers on any technical clarifications or system presentation
• Other ad hoc duties as assigned

Qualifications and Education Requirements

• At least 3 -5 Years of working experience in the water and wastewater field (with Design and Proposal role)
• Candidate must possess at least Bachelor’s Degree/ Post Graduate Diploma/ Professional Degree in Chemical Engineering/ Environmental Engineering
• Proficient in AutoCAD and Microsoft Office software
• Fast learner and able to cope in a fast paced environment

About our Company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Supervise construction works, maintain quality control and ensure that the works are carried out in accordance with the project specifications, design intent, approved drawings and site instructions by the supervising qualified persons
• Ensure that site personnel carry out their work in compliance with the prevailing regulations set up by the building authorities and government agencies of Singapore
• Perform tests to check the quality of materials
• Review project drawings and specifications, and raise any discrepancies and/or potential problems to the appointed Qualified Person and relevant stakeholders
• Attend meeting with qualified persons and relevant stakeholders
• Prepare progress reports
• Work under the control and direction of the appointed Qualified Person(s) when carried out his/her duties for the assigned project
• Any other duties as assigned from time to time

Prerequisites

• Diploma/Degree in Civil & Structural Engineering
• Accredited as a C&S Resident Technical Officer (RTO) by Institution of Engineering Singapore (IES) or Association of Consulting Engineers Singapore (ACES)
• Certificate in BCSS (Building Construction Safety Supervision) or other similar construction-safety certification
• Minimum 2 years of experience as a Resident Technical Officer (RTO)
• Able to read and interpret architectural drawings and details of construction projects
• Project Location: Jurong Island (Transport will be provided at designated pick-up points)

Responsibilities

• Plan, supervise and execute projects and tasks based on the objective set by Management.
• Solve and prevent problem occurrence and to increase customer satisfaction on Product Quality.
• Perform quality, env. and water efficiency system maintenance in the company.
• Support in maintaining & upkeep ISO 9001, ISO 14001, IATF1694, ISO 17025 and ISO 13485 and ISO 46001 in the company.
• Understand company’s Quality, Env., Water Efficiency and OH&S Policy and Objectives, Env. aspects and impacts, Safety news, Safety risk assessment, Information Security risks, etc.
• Perform internal QEMS and WEMS audit and coordination with internal dept for external QEMS and WEMS audit, provide support for customer audit and perform vendor audit.
• Monitoring production dept. quality failure cost.
• Perform calibration & maintenance of x-ray machine, ensure good housekeeping of X-ray equipment’s area and update monthly schedule report of x-ray machine.

Requirements

• Minimum 2 years experiences in engineering or quality assurance field.
• Preferably with experience in supplier management and product qualification.
• Strong understanding of automotive 5 core tools (APQP, PPAP, MSA, FMEA, SPC) and good working knowledge of Minitab or JMP application will be added advantage.
• Good knowledge of 8D problem solving tools (Fishbone diagram, 5-Why, etc.) is preferred.

Shift Type / Work Hours

Normal Shift (5 days work week)

7.50am to 4.55pm

Benefits

1. Company transport provided at designated pick-up points island-wide.
2. Medical insurance and dental coverage.
3. In-house canteen at subsidized prices.

Please visit our corporate website for more information on Seiko Epson Corporation

Responsibilities

· To optimize airside equipment selection in order to minimize the cost and enhance winning probability for project tender

· To respond to customers in timely manner on changes in project tender requirement

· To process PO, SO, MSR, etc. into the system

· To enter order to factory with accuracy

· To ensure delivery schedule meets customer’s requirement to align with the sales forecast

· Any other duties as assigned from time to time

· Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements

· Education levels should be Diploma in Engineering or equivalent

· At least 1-2 years of experience in relevant job scopes

· A team player, able to work in a team closely

· Meticulous and has eyes for details with pleasant characteristics

· Good communication skills