Total 190 purchasing engineer job vacancies in F&B / Tourism / Hospitality category in islandwide

Responsibilities:

1. Work effectively with Operations and Maintenance staff from the Lines as well as other engineering departments to investigate defects. To develop methods, propose modifications and improve maintenance strategies to rectify them.

2. Analyze and trend condition monitoring and defect data to identify reliability concerns. To develop methods, propose modifications and improve maintenance strategies to overcome them.

3. Draft technical work instructions for preventive and corrective maintenance activities.

4. Identify and implement cost effective technologies to enhance the RTS Signaling, Communication & Control System performance.

5. Support LTA and RTSO projects in reviewing project design specifications and ensure their adequacy for the safety, reliability, maintainability and operability. To provide other engineering support to the projects, as required.

6. Work in STRC Tuas, Singapore

Qualifications & Work Experience:

1. Degree in Electrical & Electronics Engineering or equivalent from recognized institution

2. Previous Railway System experience would be advantageous

More Jobs at: www.blueboxjobs.com

• Provides Electrical/Instrument/Mechanical/Utilities engineering and troubleshooting support with the goal to increase operational efficiencies and minimize maintenance expenses
• Supervises maintenance technicians to support unit operations and/or run the utilities plant
• Standby for any emergency repair after office hours I weekends and public holidays
• Leads during the calibration of instruments, selection and installation of utilities automation systems
• Tracks and completes all compliance related requirements
• Oversees installation, modification, fabrication, testing, servicing and repairs of equipment adhere to site change control procedures
• Performs testing, commissioning, qualification (IQ, OQ) activities accordingly
• Manages maintenance related project schedule, costs and quality utilizing proper controls.
• Ensures that maintenance projects deliverables are met and all associated documentation is established
• Identifies, executes and makes improvement on routine work activities
• Participates in the improvement studies to enhance equipment or system efficiency, reduce energy cost/usage and other cost saving/avoidance projects
• Performs job assignments by Supervisor pertaining to equipment or system or documentation or housekeeping
• Establishes SHE objectives for projects and leads the implementation of systems.
• Support in utilities automation systems evaluations & implementation
• Participate in SHE, Business Compliance, cGMP and all other compliance-related matters, where applicable
• Any other tasks as and when assigned by Supervisors
• Ensures operational knowledge and technical skills are maintained and compliant with individual training and job requirements
  

Requirements
Bachelor’s degree in Engineering, Mechanical Engineering, Chemical Engineering or its equivalent
3-5 years of relevant technical experience in the pharmaceutical or manufacturing industry
Boiler Certificate preferred

Your Role

• Coordinate design drawings with consultants to comply with requirements of the authorities
• Review and provide solutions to technical problems as well as plan, monitor and report shop drawing production progress
• Prepare technical submissions for materials, construction methods and C&S shop drawings
• Resolve construction issues on drawings and liaise closely with Architectural and M&E teams as well as the authorities
• Supervise a team of BIM Modelers for the production of coordinated shop drawings and Concrete Body Plans

The Requirements

• Possess a Degree in Civil/ Structural Engineering with relevant design working experience with contractors
• Preferably a Professional Engineer registered with the Professional Engineers Board, Singapore
• At least 3 year(s) of working experience in the related field is required for this position.
• Be conversant in British & Singapore Design Standards
• Be independent, analytical, highly motivated with excellent team spirit and interpersonal skills

• Site coordination, project schedule planning, coordinate site works with subcontractor.
• Design and deploy HVAC controlling and building automation system.
• Project Management and attend project meeting.
• Provide training to customers.
• Provide testing and commissioning services.
• Prepare and submit operations and maintenance manuals.
• Projects management and implementation and troubleshooting.

Qualifications:

• Bachelor’s degree in electrical engineering or Instrumentation Engineering.
• Job Experience : At least 8 years of work experience in Electrical and Instrumentation system.
• Strong knowledge of field instrumentation, electrical systems, control systems, and industry standards.
• Excellent analytical and troubleshooting abilities with a methodical approach to problem resolution.
• Proven ability to work effectively in a team environment, fostering collaboration and teamwork.
• Strong communication and interpersonal skills, with the ability to present technical information clearly to various stakeholders.
• Demonstrated ability to stay current with new technologies and apply innovative solutions to optimize plant operations.
• Effective leadership and mentoring skills with a commitment to developing team members.
• Flexible and resourceful, with a positive attitude and willingness to learn from experienced colleagues.

Inspection of Electrical Equipment function test and Illumination level testing of lighting system.

Responsible for all field quality verification and inspection activities according to method of statement, inspection and test plans such as cable pulling and termination of Instrument cables, installation of cable tray, installation of field mounted Instrument, witness calibration check of Instrument to higher accuracy
To ensure all work, tests and inspections undertaken is in accordance with the Specifications/Contract Requirements and signs the relevant Test Certificates.
Review of all instrument accepted documents such as Instrument data sheet, vendor drawings, Instrument and Piping diagram with latest revisions, quality control inspection report documents signed by QC inspector and Owner representatives. Inspection of E&I installation cabinet Monitoring control cabinet wiring, Termination, cable routing and cable tray installation. Inspection of Switch Gear Panel installation, Cable Termination

Requirements

Must possess bachelor degree

Must possess COMPEX/ATEX

Must have marine shipyard experience

Responsibilites

• Design, implement, and configure OpenShift clusters and containerized applications
• Develop and maintain technical documentation related to design, configuration, usage, troubleshooting, backup, recovery, etc., for all OCP environments
• Provide Technical assessment and advisory in relation to design, installation, configuration, including system upgrade and migration of OCP environment, including the operators for OCP
• Collaborate with development teams to onboard and optimize applications on the OpenShift platform
• Implement best practices for containerization, orchestration, and automation using OpenShift
• Troubleshoot Red Hat OCP configuration and services and container issues, working in collaboration with other relevant IT areas and vendor support towards a quick and effective resolution
• Work on container security solutions and ensure compliance with security policies
• Manage OpenShift clusters for performance, availability, and capacity planning
• Perform assessments and health checks of existing solutions and provide best practice recommendation and guidance to Support team
• Automate deployment process

Requirements

• Minimum 10 years of practical experience in the implementation of OpenShift/Kubernetes environments
• Expertise with the RedHat OpenShift Container Platform/Kubernetes.
• Experience in dealing with container configuration management, especially Helm and app-of-apps concepts.
• Experience working with infrastructure as code technologies such as Ansible, Terraform.
• Knowledge of application development, ideally Java Spring Boot.
• Experience in CI/CD Pipeline.

Technical Skills

• Containerization, Linux administration, Virtualization, Networking, and Security
• Providing first class level 3 support
• Java Spring Boot, Helm, OpenShift, Kubernetes

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to A-IT Software Services Pte Ltd’s PDPA and e2i PDPA.

Responsibilities:

• Perform electrical and Instrumentation troubleshooting.
• Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety.
• Responding to breakdowns, diagnosing faults, record and report.
• Implement reliability programs and develop maintenance procedures for instrumentation & electrical equipment to facilitate consistent execution of maintenance tasks.
• Investigate instrument & electrical equipment failures or malfunctions in order to identify root causes of problems as well as recommend and implement solutions.
• Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain.
• Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose.
• Update and control of Electrical specification, procedure and drawings.

Requirements:

• Degree in Electrical Engineering or Instrumentation / Maintenance Engineering.
• Min 3 years of working experience in electrical engineering in pharmaceutical industry.
• Candidates from E&I project engineer (with brown field experience) or E&I technician (operating plant) experience will be an added advantage.

Duration : 12 months. Option to extend/convert subject to performance review.

The incumbent will be responsible for developing advanced laser systems with a focus on optimizing performance and reliability. This includes leveraging expertise in circuit design power systems, and embedded controls.

• To design and optimize electrical and electronic systems for advanced laser products
• To develop, analyze, and test circuits for laser systems, including power supplies, control units and signal processing components, re-engineer existing designs, and
• Collaborate with manufacturing team to improve DFM process.

Requirements:

• Bachelor's degree in electrical & electronics or its equivalent
• Relevant work experience in electrical circuit and layout design
• Strong experience in designing electronics schematics and PCB layouts using Altium Designer, Cadence or similar tools

Interested candidates, please forward your most recent resume to [email protected]

Responsibilities:

- To review the tender specification requirement & suppliers quotation compliance.

- To work with Project Manager to confirm system design & procurement

- To ensure equipment installation & alignment as per project requirements

- To organize daily works, ensuring work performed on site comply with safety standards and with local authority requirements

- Monitor project progress & conduct site inspection

- To attend to technical meetings to ensure all aspects & requirements were taken care of

- To liaise with relevant parties to ensure efficient & timely delivery of assignment

- To prepare & submit site progress report & all other necessary project documentation

- Attend meetings and conduct site inspection with relevant parties to resolve technical/site issues

- Ensure timely handover of project

- Other project-related tasks as deemed necessary

Requirements:

- Diploma/Degree in relevant industry. Safety certifications an added advantage

- Min. 1-5 years working experience in Fire Protection/Sprinkler system in a construction firm

- Good knowledge of project management principles

- Proficient in communication skills at an operational level

- Able to work independently with minimal supervision

- Able to converse in both English & preferably Mandarin as required to liaise with Mandarin speaking site workers, subcons/vendors

- Singaporean or Singapore PR preferred

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Building & Facility Executive | Maintenance Engineer | Up to $5k | Tuas

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3000 - $5000

Requirements:

• Diploma/Degree holder in Facilities Management, Building Services or related field
• Minimum 3 years of working experience in building & facilities management and is 'hands on' to ensure planning to execution success in building & facility initiatives undertaken including for clientele base

Job duties & responsibilities:

• Plan, organize, coordinate, and oversee operational processes of all Company facility areas assigned, including maintenance, safety and cleanliness
• Work within budgetary and compliance parameters to ensure upkeep of building facilities
• Ensure legal compliance where needed
• Work closely and liaise with vendors, contractors, and suppliers to implement cost-effective, simpler, and faster ways of carrying out facility upkeep, development and maintenance
• Manage and attend to all feedback and service requests in a timely manner
• Lead the technicians and manage vendor services to achieve the required professional standards in day-to-day operation
• Raise PO and certify job completion/delivery undertaken by contractors/vendors
• Manage and update online systems
• Initiate B&F activities for workers’ dormitories to ensure compliance with regulations and Company facilities' policies
• Initiate value added services to clients in renting of facilities/storage spaces etc and generate some income for the department
• Assume any other facilities-related duties assigned by the management

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769
Senior Recruitment Consultant

Senior Rotating & Package Engineer

[Oil & Gas | EPC Industry]

• Basic: $5,500 - $6,900 (Depends on EXP)
• Working Hours: 5 Days
• Location: South (Near MRT)

Interested applicants can sent your CV to email [email protected]

About Our Client:
Our client is a distinguished leader in the Oil & Gas and Petrochemical sectors, renowned for its engineering prowess and dedication to delivering landmark projects. As a reputable EPC contractor, they push the boundaries of what’s possible in infrastructure solutions, emphasizing innovation, safety, and sustainability to bring complex visions to life. This organization is at the forefront of engineering excellence, setting industry benchmarks throughout the region.

Why Join This Team?
Joining our client means becoming part of an inspiring and forward-thinking team that values your expertise and fosters your growth. This role offers you the opportunity to shape major engineering projects, making impactful contributions that resonate across industries. With an environment built around cutting-edge technology, collaborative problem-solving, and continuous professional development, you’ll thrive in a workplace that rewards ambition, innovation, and dedication.

Role Overview:
We are looking for a Senior Rotating / Package Engineer to oversee and manage all aspects of mechanical engineering design and package equipment for major projects. This role involves leading multidisciplinary teams, ensuring technical excellence, and providing support through all project phases.

Job Scope:

Mechanical Systems Design and Oversight:

• Take ownership of mechanical engineering assignments, specializing in pumps, compressors, turbines, blowers, and package equipment.
• Act as a quality reviewer, ensuring accuracy and compliance in all mechanical deliverables.

Documentation and Specifications:

• Develop and review specifications, datasheets, and inquiry documents.
• Conduct technical evaluations and provide recommendations during the bidding process.

Coordination and Layout Planning:

• Collaborate with various disciplines to optimize layout designs.
• Manage vendor documentation and ensure effective vendor communication and compliance.

Site and Workshop Engagements:

• Participate in site surveys, HAZOPs, FATs, and shop inspections.
• Provide technical support during construction, pre-commissioning, and commissioning stages.

Interface Management:

• Address interface issues, ensuring smooth coordination among internal and external stakeholders.
• Deliver timely technical resolutions to maintain project timelines.

Additional Responsibilities:

• Conduct mechanical handling and movement studies.
• Be prepared for field assignments, including construction site duties and overseas deployments as required.
• Support departmental initiatives and fulfil tasks assigned by the Department Manager or Supervisor.

Skills and Competencies:

• Expertise in mechanical systems, including pumps, compressors, turbines, blowers, and packaged equipment.
• Strong analytical skills to interpret client requirements, identify deviations, and propose resolutions.
• Proven ability to lead and manage multidisciplinary teams across various locations.
• Excellent communication skills and proficiency in English and MS Office applications.
• Strong planning and coordination abilities to ensure seamless project execution.

Requirements:

• Bachelor's Degree in Mechanical Engineering
• 12–15 years of industry experience.
• Hands-on field experience in engineering, commissioning, and troubleshooting.
• Familiarity with industry standards such as Shell DEPs, Exxon GPs, and Chevron CES is highly advantageous.

Interested applicants, please click "APPLY NOW" or send your resume to [email protected]

We regret to inform you that only shortlisted candidates will be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Kho Tong Hai | EA Reg No: R24122411

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Building & Facility Executive | Maintenance Engineer | Up to $5k | Tuas

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3000 - $5000

Requirements:

• Diploma/Degree holder in Facilities Management, Building Services or related field
• Minimum 3 years of working experience in building & facilities management and is 'hands on' to ensure planning to execution success in building & facility initiatives undertaken including for clientele base

Job duties & responsibilities:

• Plan, organize, coordinate, and oversee operational processes of all Company facility areas assigned, including maintenance, safety and cleanliness
• Work within budgetary and compliance parameters to ensure upkeep of building facilities
• Ensure legal compliance where needed
• Work closely and liaise with vendors, contractors, and suppliers to implement cost-effective, simpler, and faster ways of carrying out facility upkeep, development and maintenance
• Manage and attend to all feedback and service requests in a timely manner
• Lead the technicians and manage vendor services to achieve the required professional standards in day-to-day operation
• Raise PO and certify job completion/delivery undertaken by contractors/vendors
• Manage and update online systems
• Initiate B&F activities for workers’ dormitories to ensure compliance with regulations and Company facilities' policies
• Initiate value added services to clients in renting of facilities/storage spaces etc and generate some income for the department
• Assume any other facilities-related duties assigned by the management

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769
Senior Recruitment Consultant

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quotation & Tendering Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• Draft and compile technical documentation, such as datasheets, proposal designs, clarification notes, and responses to tender specifications.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience.
• Proficient in Microsoft Office and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Electrical & Instrumentation Engineer

Summary:

Oversee design, installation, commissioning, and qualification of electrical and instrumentation systems for process and utility projects. Ensure compliance with budget, timeline, cGMP, safety, and environmental standards. Transition systems into operational phases with a focus on seamless integration and calibration accuracy.

Responsibilities:

Design Phase:

• Develop electrical and instrumentation specifications.
• Conduct feasibility studies, risk assessments, and instrument criticality analysis.
• Maintain engineering documents (specifications, P&IDs, datasheets, layouts).
• Evaluate and specify instruments/equipment for process and utility systems.
• Collaborate with engineering teams, review designs, and support procurement.

Installation/Qualification Phase:

• Supervise installation, commissioning, and qualification activities.
• Ensure compliance with design standards during installation.
• Manage calibration activities and oversee functional testing.
• Develop and execute commissioning plans and qualification protocols.
• Troubleshoot issues and ensure proper system handover to operations.

Operational Transition:

• Set up calibration workshops and maintain calibration equipment.
• Develop calibration schedules and procedures.
• Monitor system performance, implement improvements, and provide training.
• Maintain records in CMMS (e.g., Maximo) and ensure compliance with standards.

Requirements:

• Bachelor’s degree in Engineering, Mechatronics, or related field.
• 8+ years of industry experience in electrical/instrumentation projects.
• Strong design, project management, and budgeting skills.
• Experience with instrumentation in biotech/pharmaceutical environments.
• Proficiency in CMMS (e.g., Maximo), AutoCAD, and office software.
• Knowledge of regulatory standards and codes.
• Ability to manage audits and CAPA processes.
• Willingness to travel and undergo training abroad.
• GMP Manufacturing experience is a must

Preferred:

• Instrumentation expertise with secondary automation skills.
• Proficiency in Chinese/English for stakeholder communication.

Please apply for the role via LinkedIn. Looking forward to connecting with you.

Registration No: R22106084

EA Licence No: 22S131

Exciting opportunity for a hands-on electrical engineering professional to develop advanced laser systems with a focus on optimizing performance and reliability. This includes leveraging expertise in circuit design, power systems, and embedded controls. The role will include re-engineering existing systems to reduce costs, enhancing the product portfolio, and providing seamless support for sustaining production with the aim to directly contribute to improving operational efficiency and driving profitability.

Role

· Design and optimize electrical and electronic systems for advanced laser products, ensuring high performance and reliability.

· Develop, analyze, and test circuits for laser systems, including power supplies, control units, and signal processing components.

· Embedded control systems will be implemented and troubleshooted to enhance laser functionality and automation.

· Re-engineer existing designs to reduce costs while maintaining quality and performance standards.

· Collaborate with manufacturing teams to improve design-for-manufacture (DFM) processes, ensuring efficient and scalable production.

· Provide technical support to sustain smooth manufacturing operations and consistent product quality will be a key responsibility.

· Drive continuous improvement initiatives to enhance efficiency, reliability, and profitability in laser system designs and production processes.

Requirements

· Bachelor in electrical & Electronics (BEng) or equivalent with at least 3 to 5 years of relevant work experience in electrical circuit and layout design.

· Proficient in using standard measurement equipment like oscilloscopes, function generators, laboratory power supplies, and multimeters.

· Strong experience in designing electronics schematics and PCB layouts using Altium Designer, Cadence or similar tools.

· Familiar with IPC standards and their application in PCB design and manufacturing.

· Basic firmware programming skills and the ability to troubleshoot embedded systems.

· Analytical problem-solving skills with a focus on innovation and reliability.

· Strong communication and teamwork abilities.

Interested applicants, please submit your profile to [email protected]for review. We will be in touch for initial discussion upon being shortlisted

EA Licence: 17S8795 | EAP: R1108333

Job Highlights

• Over $200 million large-scale EPC projects island wide Singapore
• A Public Listed M&E Engineering Company with decades of establishment.
• 5 days ‘work week only. Career advancement with great exposure.
• Company transport provided two-ways

Job Responsibilities

• Design, develop and maintain plant automation control system/program and components.
• To perform routine inspection and troubleshooting of plant automation control system/program and components
• To perform system test and fault diagnostic to improve and upgrade the line control system/program.
• To review and evaluate breakdowns and carry out corrective & preventive measures.
• To supervise site installation work (electrical/control system installation)
• To execute on-site commissioning work
• To maintain proper documentation, including updating all drawings, calibration procedures, operating manuals, and diagnostic files.

Job Requirements

• Bachelor’s degree in electrical engineering
• Comprehensive knowledge of designing, developing, and maintaining plant automation control system/program and components
• Strong analytical and trouble shooting skills
• Well verse in interpretation of P&ID drawings and engineering documents associated with electrical/instrumental
• Good knowledge of PLC Logic and programming

If you are shortlisted for the first round of screening, our Recruiter will contact you directly.

EA License No: 24C2521 | EA Reg No:21103634 (Johnny Wu)

As a Senior/Engineer, Equipment in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time.

Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Key Responsibilities :

• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements :

• Bachelor's degree in Electrical & Electronics, Chemical, Mechanical, Materials Engineering or equivalent.
• Minimum 2 to 3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Self-motivated and adaptable to a fast paced environment, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent communication and interpersonal skills to collaborate with various stakeholders both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

Construction Engineer (1 year Renewable Contract)

[Oil & Gas | EPC Industry]

• Basic: $4,000 - $4,700 (Depends on EXP)
• Working Days: 5 Days
• Working Hours: 8am-5pm
• Location: South (Near MRT)

Interested applicants can sent your CV to email [email protected] or via whatsapp to +65 8064 9869 (TongHai)

https://wa.me/6580649869

About Our Client:
Our client is a distinguished leader in the Oil & Gas and Petrochemical sectors, renowned for its engineering prowess and dedication to delivering landmark projects. As a reputable EPC contractor, they push the boundaries of what’s possible in infrastructure solutions, emphasizing innovation, safety, and sustainability to bring complex visions to life. This organization is at the forefront of engineering excellence, setting industry benchmarks throughout the region.

Why Join This Team?
Joining our client means becoming part of an inspiring and forward-thinking team that values your expertise and fosters your growth. This role offers you the opportunity to shape major engineering projects, making impactful contributions that resonate across industries. With an environment built around cutting-edge technology, collaborative problem-solving, and continuous professional development, you’ll thrive in a workplace that rewards ambition, innovation, and dedication.

Job Summary
As a Construction Engineer, is responsible for developing detailed construction plans under the guidance of the Site In-charge/Project Manager and ensuring seamless coordination of all site construction activities. The role involves working closely with multidisciplinary teams, subcontractors, and vendors to achieve project milestones efficiently and on schedule.

Job Scope

Key responsibilities include:

• Establishing execution frameworks and defining work sequences.
• Developing plans for temporary facilities, manpower mobilization, and construction equipment.
• Preparing schedules in collaboration with the project scheduler, including progress monitoring.
• Conducting constructability studies and scaffolding plans.
• Preparing critical documents such as specifications, procedures, and manuals.
• Planning and executing heavy equipment erection and haulage.
• Overseeing HSSE compliance in collaboration with the HSSE team.
• Coordinating vendor specialist support when required

Duties & Responsibilities

• Source and evaluate subcontractors, clarify scopes, and manage cost negotiations and PO issuance.
• Verify bills of quantities (BQ), estimate construction costs, and clarify project execution plans.
• Conduct kick-off meetings with subcontractors to align execution plans, work scopes, and technical requirements.
• Perform constructability studies and create execution strategies in collaboration with engineering disciplines.
• Ensure the latest field drawings are applied and coordinate the preparation of Method Statements and Risk Assessments (MSRA).
• Plan and schedule critical work paths with team members, subcontractors, and clients to avoid project delays.
• Supervise and monitor daily site activities, ensuring progress, quality control, and adherence to HSSE standards.
• Resolve technical issues, liaise with project stakeholders, and provide regular progress updates.
• Manage construction costs, monitor subcontractor billings, and evaluate variation orders.
• Submit weekly and monthly construction progress reports to management

Requirements

• Degree in Mechanical Engineering or equivalent.
• Mnimum of 5 years of experience in construction management, preferably in oil, gas, or chemical projects.
• Strong knowledge of construction planning, management tools and subcontracting practices.
• Proficiency in MS Office and schedule reporting tools.
• Clear understanding of construction practices and methods of execution.
• Excellent coordination, communication, and problem-solving skills

Interested applicants, please click "APPLY NOW" or send your resume to [email protected]

We regret to inform you that only shortlisted candidates will be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Kho Tong Hai | EA Reg No: R24122411

We are currently looking for an Electrical & Instrumentation Engineer to support multiple projects in Singapore.

Your day to day role would involve the following activities:

• Experience across a broad range of site electrical and instrumentation engineering projects; experience in industrial buildings (Pharmaceutical, Food or Mission Critical projects) would be an advantage
• Progress reporting and manhour control for the electrical and instrumentation scope.
• Participate in troubleshooting and root cause investigation
• Work closely with calibration vendor and site team

We would like to hear from candidates who have:

• Min Degree in Electrical Engineering or its equivalent
• Min 8 years of relevant working experience in loop check, read drawings in building construction industry.
• Good knowledge of electrical and instrumentation specifications & requirements
• Be able to work independently with minimum guidance and under pressure to meet tight deadlines
• A strong ethical approach to safety, quality, environmental protection and business
• A proven track record working closely in partnership with clients and contractors

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description & Requirements

• Ensuring the optimal performance and longevity of these critical equipment
• Involves a combination of technical expertise, customer service, and problem-solving skills.
• Installing and configuring medical devices at customer sites, ensuring proper integration with existing systems.
• Performing routine inspections, calibrations, and maintenance on medical equipment to prevent breakdowns and optimize performance.
• Diagnosing equipment malfunctions, identifying faulty components, and performing repairs or replacements.

Requirements:

• Min Diploma in Mechanical / Electrical Engineering or its equivalent
• At least 1 year related working experience in Medical / Healthcare/Laboratory product is a plus
• Able to commit standby and travel if required.

Interested candidates who wish to apply for the advertised position, please click on

the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we

may collect, use or disclose your personal information for purpose in connection with the services

provided by us.

Storage and Backup Engineer – In this new role, you will be responsible for monitoring, configuring and maintaining storage and backup infrastructures, and performing regularly scheduled and emergency maintenance.

Job Responsibilities

Configuring and administering Redundant Array of Independent Disks (RAID) storage and associated components, Storage Area Network (SAN) including fibre channel switch administration, data restore and disaster recovery and data backup for clients and servers.

Maintaining storage aspects of new server integrations, storage allocations and change management.

Performing setup procedures to consolidate storage of data from different platforms (i.e. Windows, UNIX and LINUX).

Troubleshooting and fixing storage issues and also performing routine equipment check and preventative maintenance.

Performing storage analysis, capacity planning and performance planning of storage components.

Documenting the policies and procedures to support the operational storage environment and participating in the design and ongoing refinement of procedures and policies.

Preparing reports on storage administration best practices, new technologies, etc. and recommending enhancements and configuration changes to improve and optimize storage.

Requirements

Technical Requirements

Min. 5+ years’ experience and good knowledge in Avamar Backup Solution, EMC VNX series

Relevant certification in Storage administration is an added advantage

A leading provider of engineering solutions specializing in electrical systems, construction, and project management services.

Responsibilities:

• Work with the Construction Team and Clients to plan and schedule Testing & Commissioning (T&C) activities.
• Collaborate with the Construction Team, Sub-Contractors, and Clients on all T&C tasks.
• Identify and resolve issues during T&C activities to reduce downtime and meet project deadlines.
• Attend meetings with the Construction Team, Sub-Contractors, and Clients.
• Ensure compliance with safety protocols and regulations.
• Perform other tasks as needed.

Requirements:

• Minimum Nitec in Electrical Engineering.
• At least 3 years of experience in Testing & Commissioning.
• Proficient in reading technical drawings and specifications.
• Experience with LV Electrical Systems.

For consideration, kindly submit your CV by clicking “APPLY NOW”

*Only shortlisted candidates would be notified*

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24122934 | Corinne Chew