Total 1,699 environmental engineer job vacancies in Manufacturing / Production category in Singapore

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Electronics Engineer

Working hours: 5 Days， 8.30am to 6pm

Salary: Basic $3200 - $4500

Address: Serangoon North Ave

Responsibilities:
• Facilitate technical transfer of products/projects in assembly and testing, both internally and from customers
• Offer technical support in manufacturing and testing during product assembly
• Provide technical assistance to QC in handling RMA issues
• Support QA in Compliance, Regulatory, Customer & Audit matters with technical expertise

Requirements:
• Possess a minimum Diploma in Electronics Engineering
• Have at least 2 years of relevant experience in the Electronics Manufacturing industry
• Demonstrated technical proficiency in managing product/project manufacturing, transfers, and troubleshooting
• Experience in product/project, PCBA manufacturing, and testing
• Capable of effectively communicating with customers on technical matters
• Experience in a manufacturing environment with ISO13485 & FDA is preferred
• Strong communication and problem-solving skills

Our client is from Manufacturing industry. They are looking for a Engineer, Product Costing to assist their team for the next phase of their business. They are located in North.

Duties:

• Lead cost-saving initiatives through Value Analysis Value Engineering (VAVE) or Design to Cost (DTC).
• Ensure timely and well-tracked cost reductions.
• Oversee the product lifecycle from entry to end-of-life.
• Represent the organization in cost-related initiatives.
• Compile and provide necessary reporting.

Requirements:

• Minimum Bachelors Diploma/ Degree in Mechanical or Electrical Engineering
• Minimum 3 years of experience in commodity / project management with supply chain and engineering
• Experience in VAVE is required.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

A leader in the market for public housing glazing works, we are looking for a self-driven individual who enjoys hands-on with machinery and has strong analytical skills to join our team.

JOB DESCRIPTION

In this role, you will need to

1. Plan, create, release and follow up on production orders

2. Carry out preventive maintenance of machines and perform quality control inspection

3. Liaise with machine manufacturers to perform troubleshooting of production equipment as and when needed

4. Review and recommend disposition of rejected in-coming raw material, work-in-process and finished goods

5. Investigate quality escapes and recommend preventive measures

6. Collect and analyse production data to improve production efficiency and processes

7. Perform any adhoc duties as assigned by superior

JOB REQUIREMENTS

To qualify for this role, you will need to have

1. At least a minimum NITEC in Mechatronics Engineering or Mechanical Engineering certificate.

2. 1 to 2 years of working experience preferred

3. Ability to understand mechanical and electrical drawings

4. Good command of written and spoken English needed for communications with overseas vendors

5. Competency in the use of Microsoft Office such as Outlook, Excel, Word & PowerPoint

6. A team player who is self motivated and demonstrates initiative

7. A highly analytical and meticulous problem solver

8. A hands-on learner and loves working with machinery

9. Comfortable with working with a diverse group of people

Others :

• 5 day work week
• Career advancement opportunities
• Within walking distance to Gul Circle MRT
• Located next to bus stop
• Free parking

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Product engineering for VCSEL products
• Maintaining and improving VCSEL performance, yield, and reliability with extensive data analysis
• Ph.D. in physics, electrical engineering, material science or equivalent
• Experience in crystal defect study of semiconductor material with TEM a plus
• Successful candidate must be willing to work in Depot Road

• Handle assigned Product from design to end of life and prepare the NPI schedules and ensure to meet the timeline.
• Monitor the progress of the product start from design to New Product Introduction (NPI) and site transfer until production ramp up.
• Liaise with respective functional department and teams to clear the roadblocks of any issue related to assign products.
• Develop continuous product improvement costing, process etc.

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent
• At least 3 years of product transfer experience in Electronics industry.
• Able to multitask and good computer knowledge.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Position: Production Support (IHS Markit EDM solutions, Tectia scripting, Control-M)
Employment Type: 1-year Agency Contract (Highly Renewable)
Location: Alexandra

Key Skills:
- IHS Markit EDM solutions
- MS SQL Database knowledge
- Windows NT batch, Tectia SFTP scripts skills
- Asset Management Business functional knowledge

Job Objectives

• To provide proactive, timely, effective and efficient support to the business users
• To perform production support activities which involve assignment of issues and issue analysis and resolution within the specified SLAs
• To own issues and projects, and work with the various teams to develop solutions for the users
• To collaborate with business partners, third party vendors, and technology teams to facilitate the support process and work toward timely and effective issue resolution

Responsibilities:

• The Production Support person is responsible for managing the Enterprise Data Management application including web GUI, SQL database and Tectia SFTP batch scripts.
• Work in the Production support team; Provide front-line support for incoming issues to ensure timely and effective resolution of user issues, queries and projects
• Adopt standard Incident and Problem Management workflow and processes, i.e. timely ticket, defect and incident loggings, proper change management process, and quality issue/impact emails
• Actively manage all incidents and issues to proper closure – escalate issues as appropriate to necessary teams and management
• Analyse, document and track all actions taken throughout the lifecycle of the issue including decisions made, successful and unsuccessful actions taken, and final steps executed for resolution. Evaluate documented resolutions, analyse trends, and make recommendations to prevent future occurrences of similar issues
• Participate and collaborate with the development team in requirements gathering, clarification, and analyse impacts on issue or users requirements
• Assist the application development team as needed by validating fixes or enhancement to ensure problems have been adequately resolved
• Embrace standard Change Control Management practices, procedures and guidelines for application releases
• Engage vendor to provide solutions for the stability and sustainability of the production environment.
• Participate in annual DR/BCM activities or infrastructure related upgrade
• Utilize software updates, drivers, knowledge bases, and FAQ resources on the Internet/Intranet to aid in problem resolution

Job Requirements:

• Knowledge in HIS Markit EDM solution, MS SQL database, Windows/Tectia scripts, control-m job scheduling
• Min. Diploma in Computer Science / Engineering or related disciplines
• Min. 2 years of hands-on application management experience, preferably in the Asset Management business
• Strong skills in Windows batch, Tectia scripting, MS SQL Database, BMC Control-M Scheduler
• Good team player, Independent, proactive and self-starter with excellent interpersonal and communication skills

If keen, kindly forward your CV to [email protected]

Tangspac Consulting Pte Ltd
#03-02 The Octagon, 105 Cecil Street, Singapore 069534
EA Personnel Name: Olsem Stefanus Emmanuel
EA License: 07C3635 | EA Registration: R2094432

• Handle a team of line leaders and operators to meet daily production output, quality, productivity, and yield.
• Responsible for manpower, overtime and consumables planning and perform daily pass-down meetings and escalate line issues.
• Ensure manufacturing and safety procedures are observe at all times.

Requirements:

• Diploma in Engineering or equivalent
• At least 2 years of experience in High-Tech, High-Vol Manufacturing industry.
• Able to work 12-hour shifts (day or night)

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Job Description

• Industry/ Organization Type: Manufacturing/Aerospace Engineering
• Position Title: Manufacturing Engineer
• Working Location: Seletar Aerospace Park
• Working Hours: Monday – Friday, 8 am – 5.30 pm
• Salary Package: Up to $4000 + AWS + VB
• Duration: Permanent

Key Responsibilities

• Prepare production drawings by 2D drafting or 3D modelling using CAD software for design and build-to-print jobs.
• Carry out manufacturing process planning using ERP.
• Prepare Bills of Material from customer drawings or in-house designs.
• Provide technical support during fabrication phase in areas of machining, welding, and assembly.
• Provide technical support for outsourced parts fabrication.
• Collaborate with cross functions to ensure on-time delivery, quality and cost goals are met.
• Participate in continuous improvement projects as part of the lean manufacturing transformation.
• To use engineering tools to test and implement efficiencies in quality, manufacturing, assembly, and testing.
• To provide customer support/liaise/coordinate/follow-up with external customers on assigned projects.
• To monitor project deliverables.
• To facilitate collection of customer requirements during RFQ stage for design projects.
• Any other duties as and when assigned by the Management.

APPLY NOW!!!

• Minimum Diploma in Mechanical Engineering or other related discipline with at least 3 years of relevant experience.
• Ability to interpret engineering drawings and carry out drafting or 3D modelling work.
• Possesses good knowledge of machining processes and technologies.
• Possesses good project management and coordination skills.
• Proficient in MS Office applications, Adobe Acrobat, AutoCAD, NX and GD&T.
• Experience with CNC machining and machine measurement will be advantageous.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65848 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Location: Woodlands

Mon to Fri 8.30am to 5.30pm

Salary: $2800-$3800

US MNC-Have AWS & Good Bonus

Industry: Clean room manufacturing

Job Description

• Work closely with Process/Manufacturing Engineer to monitor and improve the process capability.
• Ensure the scrap, production yield and cycle time reduction targets are met.
• Review process issues, NCR and conduct failure analysis.
• Updating of Manufacturing work instructions/routers.
• Participate in cross-functional teams on various improvement projects.
• Conduct Evaluations/Special Build Request.
• Support QA for failure analysis and identification of corrective action for customer returns and internal CAR’s.

Requirements

• Nitec in engineering & above
• Minimum of 2 years experience in process environment

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Responsibilities

Assist Senior Production Engineers in managing a production team that includes:

• Resources are used efficiently.
• Co-ordinating between other teams like Planning, Quality Control and other departments
• Ensure all the works to be carried out in a safe manner with proper methods, tools etc.
• Ensure production and safety SOP are being followed correctly.
• Meet customer’s requirements that include:
• Delivery Schedules
• Documentation
• Quality
• Safety

Requirements

1. Bachelor degree/Post Graduate Diploma in Civil & Structural Engineering from recognised University.

2. Ability to work independently.

3. Ability to adhere to schedule and keep proper records.

4. Strong teamwork spirit, proactive & good communication skills.

Our client is from Manufacturing industry. They are looking for a Engineer, Product Costing to assist their team for the next phase of their business. They are located in North.

Duties:

• Lead cost-saving initiatives through Value Analysis Value Engineering (VAVE) or Design to Cost (DTC).
• Ensure timely and well-tracked cost reductions.
• Oversee the product lifecycle from entry to end-of-life.
• Represent the organization in cost-related initiatives.
• Compile and provide necessary reporting.

Requirements:

• Minimum Bachelors Diploma/ Degree in Mechanical or Electrical Engineering
• Minimum 3 years of experience in commodity / project management with supply chain and engineering
• Experience in VAVE is required.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

• Handle assigned Product from design to end of life and prepare the NPI schedules and ensure to meet the timeline.
• Monitor the progress of the product start from design to New Product Introduction (NPI) and site transfer until production ramp up.
• Liaise with respective functional department and teams to clear the roadblocks of any issue related to assign products.
• Develop continuous product improvement costing, process etc.

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent
• At least 3 years of product transfer experience in Electronics industry.
• Able to multitask and good computer knowledge.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Location: Woodlands

Mon to Fri 8.30am to 5.30pm

Salary: $2800-$3800

US MNC-Have AWS & Good Bonus

Industry: Clean room manufacturing

Job Description

• Work closely with Process/Manufacturing Engineer to monitor and improve the process capability.
• Ensure the scrap, production yield and cycle time reduction targets are met.
• Review process issues, NCR and conduct failure analysis.
• Updating of Manufacturing work instructions/routers.
• Participate in cross-functional teams on various improvement projects.
• Conduct Evaluations/Special Build Request.
• Support QA for failure analysis and identification of corrective action for customer returns and internal CAR’s.

Requirements

• Nitec in engineering & above
• Minimum of 2 years experience in process environment

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Handle assigned Product from design to end of life and prepare the NPI schedules and ensure to meet the timeline.
• Monitor the progress of the product start from design to New Product Introduction (NPI) and site transfer until production ramp up.
• Liaise with respective functional department and teams to clear the roadblocks of any issue related to assign products.
• Develop continuous product improvement costing, process etc.

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent
• At least 3 years of product transfer experience in Electronics industry.
• Able to multitask and good computer knowledge.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• To provide industrial engineering support to shop production, internal & external customers in manufacturing process development, tools & fixture design and implementation, machines programming, procedure development as per engineering BOM requirement and business need
• Create manufacturing process (routing) and procedure (work instruction) per engineering BOM, quality plan and manufacturing process requirement.
• To provide the CAM software application support to CNC programming, including CAM software postprocessor improvement and creating new
• Design tooling and fixture as manufacturing process and operations’ needs.
• Design CNC machines programming and PLC recipe as process requirement and productions schedule.
• Analyze and continuously improve manufacturing process to achieve best production safety, quality, and cost performance.
• Evaluate and implement new manufacturing technology for shop operations objectives, manufacturing capability and capacity improvement.
• Develop and provide training for shop technicians for new products, process, tooling and others’ needs.
• Perform other technical support or projects as required
• Diploma / Degree in Mechanical / Manufacturing Engineering.
• Familiar with CAD / CAM 2D drawing and 3D modelling.
• Familiar with MS software

Veronica Neo Shen Hwa - [email protected]

Personnel Reg No: R1110855

Manpower Staffing Services (S) Pte Ltd

EA Licence No: 02C3423

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Our client is from Manufacturing industry. They are looking for a Engineer, Product Costing to assist their team for the next phase of their business. They are located in North.

Duties:

• Lead cost-saving initiatives through Value Analysis Value Engineering (VAVE) or Design to Cost (DTC).
• Ensure timely and well-tracked cost reductions.
• Oversee the product lifecycle from entry to end-of-life.
• Represent the organization in cost-related initiatives.
• Compile and provide necessary reporting.

Requirements:

• Minimum Bachelors Diploma/ Degree in Mechanical or Electrical Engineering
• Minimum 3 years of experience in commodity / project management with supply chain and engineering
• Experience in VAVE is required.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for reading, interpreting and drawing up technical drawing specifications
• Responsible in developing, coordinating, monitoring all aspects of the operational set up for projects assigned
• Responsible for working cross-functionally with different teams and organizations
• Responsible for applying Six Sigma/Lean Manufacturing methodologies for continuous process improvements and to improve operational efficiency

Requirements

• Min Nitec in Mechanical Engineering or relevant discipline
• Min 1 years of working experience in manufacturing industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026