Total 1,695 failure analysis engineer job vacancies in Manufacturing / Production category in Singapore

• Handle assigned Product from design to end of life and prepare the NPI schedules and ensure to meet the timeline.
• Monitor the progress of the product start from design to New Product Introduction (NPI) and site transfer until production ramp up.
• Liaise with respective functional department and teams to clear the roadblocks of any issue related to assign products.
• Develop continuous product improvement costing, process etc.

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent
• At least 3 years of product transfer experience in Electronics industry.
• Able to multitask and good computer knowledge.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description – Product Configuration & Obsolescence Engineer

• Responsible for configuration management and release management

• Responsible for obsolescence management

• Maintain product configuration status for hardware and software version control

• Execute product identification process and ensure part numbering and serial numbering are maintained

• Ensure compliance to ECO process for hardware, software and mechanical design changes

• Ensure implementation of approved ECO to production

• Manage electronic component obsolescence notification from service partner

Requirements

• Degree in Electronics or Mechanical Engineering with at least 2 years relevant experience

• Good working knowledge of configuration management, release management, ECO management and obsolescence management

• Working knowledge of PLM and PDM tools

• Ability to read schematic, PCB layout and mechanical drawings, is an added advantage

• Strong organisational skills and attention to detail

• Strong written and verbal communication skills

• Strong personal work ethics

• Able to work well independently and with cross functional teams

• Able to monitor and drive issues to closure in timely manner

• Able to work in deadline-oriented environment

• Willing to take up extra responsibilities

Assistant Production & Logistics Manager | Chemical Engineer | Jurong Island

Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm

Location: Jurong Island (Company transport provided near Jurong East MRT)

Salary : $5000 -$7000 + $250(Allowance)

The Assistant Production & Logistics Manager assists the Production & Logistic Manager in the management of the Production department and Plant operation.

Responsibilities

• To support Production Manager in leading Production & Logistics department to ensure safe and stable operation in Daily, GCM (grade change maintenance) and SDM (Shut down maintenance) operation and planning.
• To follow up with Technical and Maintenance department on critical mechanical or E&I issues that impact plant safety, quality, and reliability.
• To lead in managing the Local and Global CARs (Corrective Action Request) relating to Safety, Quality, Reliability and Stable operation matters under Production and Logistics department and manage to ensure CARs are well followed.
• To lead and support capex related matters from Production team. Capex matters include planning, proposal, study, Hazop, commissioning and evaluation in each of the Capex planning phases.
• To support and lead in new production grade trial operation with the trial planning, manpower arrangement, coordination with other various department and in house contractors to ensure smooth operation during the trial.
• To assist or lead Global MOC relating to raw material planning, new specification changes, and packaging design changes.
• To participate and support Production & Logistics Manager in providing information and evidence during HSEQ, Stable Operation, LQA, and Budget preparation, including to make investigation summary or report.
• To undertake special assignments or projects as directed by the Production & Logistics Manager.

Requirements:

• Diploma or Degree in Chemical Engineering.
• Minimum 5 years of related working experience in Production, Operations etc. in the Chemical industry.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Info can be shared ATM: -

• Basic UP $3.5K + AWS + VB
• 5 Days (Office Hours)
• Loyang (Pasir Ris)

Your Responsibilities: -

• Ensure production processes according to work instructions
• Perform production support during new tooling and trials
• Provide recommendations, training and diagnose problems
• Maintain production machine and equipment maintenance procedures

You will need: -

• Min. 1 year of working experience in Plastic Injection Molding industry

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Responsibilities

• Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies
• Interfaces with other engineering functions to coordinate the release of product improvements and/or new products
• Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products
• Uses basic engineering and DFx principles to estimate and reduce manufacturing and/or product costs and improve delivered product quality; determines time standards and makes recommendations for tooling and process requirements
• Writes and releases test procedures
• Gathers operational and test data and evaluates results
• Evaluates work methods, procedures and policies
• Assists in determining root cause analysis for issues that arise during assembly and/or test of systems

Requirements

• Bachelor in Engineering
• Demonstrates conceptual knowledge of theories, practices and procedures within a discipline
• Applies general knowledge of business developed through education or experience
• Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments
• Works within standardized procedures and practices to achieve objectives and meet deadlines
• Exchanges straightforward information, asks questions and checks for understanding

* Please apply with detailed CV with current and expected salary, and notice period

* Only shortlisted candidates would be notified

Info can be shared ATM: -

• Basic UP $3.5K + AWS + VB
• 5 Days (Office Hours)
• Loyang (Pasir Ris)

Your Responsibilities: -

• Ensure production processes according to work instructions
• Perform production support during new tooling and trials
• Provide recommendations, training and diagnose problems
• Maintain production machine and equipment maintenance procedures

You will need: -

• Min. 1 year of working experience in Plastic Injection Molding industry

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Responsibilities:

• Understanding customer or market needs to develop new ideas or innovate existing product

• Providing key features and benefits of the new ideas / innovations of existing product

• Create Pre-Analytics report

• Collect Data and analyse report

• Conduct testing for relevant certification and report

• Create or guiding Product Training documents (technical specifications, installation guide and user guide), Marketing material

Additional Information:

• Relevant educational qualifications in Degree in Electrical / Electronic / Mechanical / IT&D field

• Proficient in Windows, Word, Power Point, Photoshop, Excel and Access

• Good communication skill and good written and spoken in English and third language will be at advantage

• This position may need to communicate with China customer

• Willing to learn and explore new technologies

• Able work independently and also with other both indoor and outdoor locations

• Team player with ambition and determination to support company’s goals.

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Fresh can apply as on the job training will be provided

• Good working attitude and self-motivate

Responsibilities:

•  Lead and supervise a team of manufacturing operators to ensure smooth and efficient production operations.
•  Monitor production schedules and targets, and take corrective actions as needed to meet customer requirements.
•  Train new employees on safety procedures, equipment operation, and manufacturing processes.
•  Develop and implement standard operating procedures (SOPs) to ensure consistent quality and productivity.
•  Coordinate with other departments to ensure timely availability of materials and resources for production.
•  Perform regular inspections to ensure adherence to quality standards and identify areas for improvement.
•  Effectively communicate with team members, management, and cross-functional teams to address any issues and drive continuous improvement.
• Ensure compliancecompliance with company policies, safety regulations, and industry standards

Requirements:

•  Diploma or Degree in Engineering or related field.
•  With 2 years of experience in the wafer fab/ semiconductor industry.
•  Prior experience in a leadership or team lead role.
•  Ability to lead and motivate a team in a fast-paced environment.

Interested candidates who wish to apply for the advertised position, please click on

the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we

may collect, use or disclose your personal information for purpose in connection with the services

provided by us.

Key Responsibilities

Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.

Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.

Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.

Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.

Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.

Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.

Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.

Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Info can be shared ATM: -

• Basic UP $3.5K + AWS + VB
• 5 Days (Office Hours)
• Loyang (Pasir Ris)

Your Responsibilities: -

• Ensure production processes according to work instructions
• Perform production support during new tooling and trials
• Provide recommendations, training and diagnose problems
• Maintain production machine and equipment maintenance procedures

You will need: -

• Min. 1 year of working experience in Plastic Injection Molding industry

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Facilitate machine preparation, setup, and qualification for shipment
• Occasionally support on-site services within and outside Singapore

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Responsibilities:

• Assist in the production and assembly of semiconductor devices.
• Perform equipment setup and calibration.
• Monitor and maintain production equipment.
• Conduct quality control inspections and testing.
• Assist in troubleshooting and resolving equipment and process issues.
• Follow standard operating procedures and maintain documentation.
• Ensure compliance with safety and quality regulations.
• Collaborate with cross-functional teams to ensure smooth production processes.

Requirements:

• Min Diploma in Engineering or related field.
• Prior experience in Wafer Fab/ Semiconductor Industry.
• Ability to work well in a team.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Facilitate machine preparation, setup, and qualification for shipment
• Occasionally support on-site services within and outside Singapore

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

about the company

My client is a leading semiconductor equipment manufacturer with an outstanding international reputation in its field and a great emphasis on training & development. With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Performs the set-up, calibration, testing and troubleshooting of equipment
• Responsible for Calibration and Repair of electronic boxes
• Setting up of tape & reel cum inspection machines.
• Prepare, setup and qualify machines
• Machine assembly
• Prepares technical reports summarizing findings and recommending solutions to technical problem
• Machine alignment, teaching and test run

skills & experience required

• Diploma / Higher NITEC in Mechatronics / Electromechanical / Mechanical / Manufacturing / Electrical Engineering
• Relevant internship / working experience in cleanroom / front end equipment manufacturing / semiconductor environment will be a plus
• Able to read basic engineering drawings
• Comfortable to be hands on and also with daily documentation & administrative
• Understand machinery automation with electrical, servo, sensor, pneumatic system
• Able to read mechanical drawings and measurement tools, perform I/O check and trouble shooting
• Training given to candidate with no experience
• Willing to work around Ang Mo Kio / Kallang / Lavender area

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Roles & Responsibilities

• To study Lift and Escalators equipment specifications and prepare layout drawings based on the confirmed product specifications.
• To prepare, modify or assist in the design drawings and resolve design problems.
• To be involve in discussion with Consultant in Structural / Architectural details.

Job Requirement

• Diploma in Electrical Engineering, Electronics Engineering or Mechanical Engineering or related discipline.
• At least 1 year of proven track record using AutoCAD and Building Information Modeling (BIM).
• Proficient in MS Office.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chong Kar Mun

EA Personnel Reg No: R2089894

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Facilitate machine preparation, setup, and qualification for shipment
• Occasionally support on-site services within and outside Singapore

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Info can be shared ATM: -

• Basic UP $3.5K + AWS + VB
• 5 Days (Office Hours)
• Serangoon / Loyang (Pasir Ris)

Your Responsibilities: -

• Ensure production processes according to work instructions
• Perform production support during new tooling and trials
• Provide recommendations, training and diagnose problems
• Maintain production machine and equipment maintenance procedures

You will need: -

• Min. 1 year of working experience in Plastic Injection Molding industry

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Manufacturing diverse team of talent. You will be responsible for supervising and coordinating production activities to meet daily and monthly manufacturing goals.

What you will be working on:

• Supervise and coordinate production activities to meet daily and monthly manufacturing goals through the efficient use of manpower, material, and machine; together with proficient methodologies, in a hazardous-free and healthy working environment.
• Plan, strategize and monitor the movement of WIP for maximum throughput, minimum idle time and maintain line linearity.
• Solicit Engineering support to ensure tight focus on areas and variance requiring immediate attention.
• Resolve and handle line-related issues / preventive maintenance and to understand all equipment capacities / constraints so as to identify, handle and resolve bottleneck situations.
• Mentor and train all Manufacturing Leaders and Assistants to develop skills required for efficient MFG operations.
• Execute improvement programs in manufacturing operations in his/her Section.
• Facilitate and participate in quality, productivity and cost reduction improvement.
• Ensure safety, discipline and housekeeping compliance by all personnel and take actions on violators.
• Ensure proper documentation and data-integrity.
• Perform shift duties to support production, as required by Section Manager.

More About You:

• Degree in Science or Engineering
• Preferably 1-3 years relevant wafer fab manufacturing experience.
• Candidates with no experience will be considered for junior role, training will be provided
• Interest in Wafer Fabrication Manufacturing
• Possess leadership quality
• Good interpersonal skills
• Team player
• Good analytical and planning skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities

• Participate in new product development project from concept to launch
• Support and improve existing product lines
• Support activities to reduce production cost, lead-time and improve product reliability and quality
• Collaborate with external partners in joint product development projects
• Manage project scope, timelines, budgets, product specifications, production schedules, and any other deliverables
• Establish engineering specifications and production processes to meet technical, functional and quality requirements
• Coordinate and support manufacturing of prototypes and products to ensure reliability and quality of product
• Develop and perform assembly and test procedures for product according to specifications
• Identify and resolve all issues effectively to achieve all objectives
• Ensure proper documentation (including manuals) of all required information for product/projects
• Support product installations and any necessary diagnoses, troubleshooting, service, and repair
• Provide product training and support internally and distributors

Requirements

• Bachelor’s degree in Electronics, Electrical or System related Engineering
• 3-5 years relevant experience in product development
• A good team player with strong interpersonal communication skill
• Self-motivated and able to take ownership of appointed task to follow through to completion with little supervision
• Familiar with programming languages C and C++
• Knowledge on Windows OS
• Basic understanding on schematic and Gerber
• Working location is in Jurong East
• Singaporeans Only

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Design new services and enhance existing processes and data flows with suitable modern technologies.
• Work on cutting-edge technology and be part of modern software development practices (e.g. agile and self-sufficient teams, continuous integration and deployment, test automation, cloud-based infrastructure, and tooling).
• Design and implement solutions to handle high levels of traffic, in a rapidly scaling environment.
• Dive deep into technologies that you are not yet familiar with and work out concepts and best practices for our stack.
• Write testable, clean, efficient code that can be confidently released in production.
• Work closely with Product and Business teams to produce high-quality results.
• Understand the importance of scalability, self-healing, performance, profiling, data, and security when developing and maintaining backend services.

Associate Manufacturing Engineer
5 days
9am-6pm
Kallang
$2800-$3500

Responsibilities:

• To prepare, setup and qualify machines prior to machine being crated before shipping out from factory to Customer
• To support site service occasionally, within and out of Singapore

Requirements:

• ITE or Diploma in Mechatronics.
• Min 2-4 years working experience
• Must have aptitude with mechanical and electrical control system.
• Must understand machinery automation with electrical, servo, sensor, pneumatic system
• Able to read mechanical drawings and measurement tools, perform I/O check and troubleshooting.
• Know how in Mechanical alignment, motor tuning and vision system will be advantage.
• Basic PC system, setup and application programing knowledge

Lim Jun Yao

Reg No: R1989028

The Supreme HR Advisory Pte Ltd

EA No: 14C7279

Highlights:

• Fortune 100 MNC
• Permanent job opportunity
• Great remuneration & benefits
• On-job training provided
• Location: India

Responsibilities:

• Devise and execute production processes aimed at maximizing efficiency.
• Address and troubleshoot technical challenges pertaining to manufacturing equipment.
• Foster collaboration with cross-functional teams to maintain smooth production operations.
• Perform routine inspections and maintenance on equipment to prevent disruptions.
• Institute quality control protocols to uphold product specifications.
• Analyze and enhance production workflows to boost productivity.
• Create and maintain technical documentation outlining production processes.
• Uphold compliance with safety regulations and standards within the manufacturing facility.

Requirement:

• min. Diploma in Science Engineering & above.
• Practical experience in production site improvement or management is a bonus.
• Good understanding of manufacturing processes and equipment.
• Proficiency in troubleshooting technical issues on the production floor.
• Knowledge of quality control standards and procedures.
• Effective communication skills for coordinating with production teams.

HOW TO APPLY:

Interested applicants please send your latest resume to [email protected] or click on “Apply Now” and provide the below details in your resume.

• Current salary (breakdown)
• Expected salary
• Notice period
• Reason of leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Dick Sern (Dick Sern)

EA Personnel Reg No: R22106832

• 5 days, East, MNC
• $3500 - $5000, AWS, Variable bonus
• Medical/Dental benefits

Job Responsibilities:-

• Analyze operational solutions for electronic interconnect manufacturing projects such as process and methods analysis, cost containment, capacity enhancement, and shipment optimization.
• Work with Original Equipment Manufacturer (OEM) customers to review customer prints, bill of materials (BOM), contractual commitments and related information to determine logistics and develop logistics metrics and key performance indicators.
• Identify cost-reduction or process-improvement logistic opportunities; develop cost estimates and forecasts
• Monitor projects from product design, materials planning, ramp-up production of wire harness products and ensure meeting with schedules and reaching company’s business objectives.
• Involved in defining work procedures/processes and building up documentation system.

Job Requirements-

• Diploma in Engineering or equivalent and at least 1 year in the manufacturing industry
• Possess with mechanical/electrical/electronics and experience in manufacturing would be an advantage
• With knowledge on production routing and scheduling is preferred
• Possess good leadership and must be a strong team player
• Hands on skill in assembly products is preferred.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186