Total 1,757 maintenance engineer service job vacancies in Manufacturing / Production category in Singapore

• MNC Company
• Basic $4500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Company located at Tuas

• Monday – Friday: 8am – 5pm

• Well Established Manufacturing Company

• Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Assist the Production Manager and Machining Shop Manager in taking charge of all jobs whenever necessary and ensure delegation and coordination on the necessary works.
• Ensure that all budgets and plans are met.
• Assist the Production Manager and Machining Shop Manager to monitor and manage loadings, direct labour hours, overtime, rework, scrap, on time deliveries, downtime, work efficiencies and ensure all measurements are within plans whenever necessary.
• Organize weekly production meeting to provide status update to all relevant departments and iron out related production issues.
• Assist the Production Manager and Machining Shop Manager to formulate shop floor production plans and optimize production hours and weekly planned hours ensuring on time delivery.
• Assist the Production Manager and Machining Shop Manager to identify the skill level of production employees and distribute suitable work tasks to achieve higher throughput whenever necessary.
• Assist the Production Manager and Machining Shop Manager to conduct annual performance appraisal for all reporting employees whenever necessary.
• Assist the Production Manager and Machining Shop Manager in resolving bottleneck situations and determining root cause, corrections and corrective actions for internal rejection and scrap.
• Assist the Production Manager and Machining Shop Manager in initiating purchase requisition for any requirements and preparing monthly reports whenever necessary.

Requirement

• Diploma / Degree in Mechanical / Manufacturing Engineering or equivalent
• 1 - 3 years of relevant experience in metal machining or oil & gas industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Key Responsibilities:

• Process Optimization: Improve manufacturing processes to minimize costs and maximize efficiency.
• Process Improvement Programs: Implement productivity and quality-focused programs.
• Compliance: Ensure adherence to regulatory and statutory requirements.
• Employee Relations: Collaborate with HR to address employee grievances.
• Performance Reviews: Conduct evaluations for maintenance technicians and engineering staff.
• Workplace Safety: Uphold and enhance safety and housekeeping standards.
• Staff Training: Facilitate staff training to maintain up-to-date engineering practices.
• Data Analysis: Analyze data for operational improvement recommendations.
• Communication & Coordination: Regular communication with production and maintenance teams.
• Recruitment Support: Assist in recruiting production personnel.
• Documentation: Maintain operating manuals, quality plans, and training materials.
• Ad-hoc Projects: Handle various projects as assigned.

Skills and Experience:

• Experience: Minimum 5 years in manufacturing, with leadership and supervisory skills.
• Skills: Ability to work under pressure, proficiency in computer applications, knowledge of ISO standards (advantageous).
• Education: Diploma or Degree in Manufacturing, Electrical, Mechanical, or related Engineering field.
• Additional Requirements: Willing to work after hours or on non-working days as needed.

Approval Limits:

• Approvals: Manufacturing instructions, purchase requisitions, overtime/leave applications, recruitment for supervisory roles, performance appraisals.

EA License No: 23C1703

EA Personnel No: R1762582

EA Personnel Name: Wong Choo Sian

Job Description:

We are looking for a skilled Product Design Engineer with a specialization in high-speed connectors to join our team. This role involves supporting the development and manufacturing of innovative products, focusing on high-speed datacom connectors. You will work closely with manufacturing teams to assess the feasibility and production capabilities of new concepts, ensuring product quality and reliability.

Key Responsibilities:

• Product Development Support:
  • Collaborate with manufacturing teams to review new product concepts, assess feasibility, and provide feedback on plant capability.
• Technical Analysis:
  • Perform Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to validate product performance and structural integrity.

Requirements:

• Proven design experience with high-speed connectors.
• Experience in designing connectors for the high-speed datacom segment.
• Strong analytical skills with expertise in FEA and tolerance analysis tools.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Description

• Develop and deploy cost modeling tool on chemicals manufacturing (solvents, basic & specialty chemicals, lab/pharma-grade).
• Simulate should-cost of chemicals manufacturing to support cost savings initiatives and sourcing strategies.
• Build-up regional cost database on chemicals & cost drivers. Track and analyze trend movement & price impact.
• Apply cost analysis to identify gaps/opportunities and propose solutions to support cost reduction/optimization.
• Conduct supply-market data research and provide market intelligence/insights to support Procurement strategies & competitive advantage.
• Collaborate with suppliers & internal manufacturing in cost model development, process efficiency improvement and alternative sourcing.
• Future scope to expand cost modelling coverage beyond chemicals category.

Qualifications

• Bachelors’ Degree or above in Engineering/Science or equivalent.
• Relevant experience in one or more of the following roles in Chemical field - Manufacturing/Process engineer, Costing/Sourcing engineer, Supply-market intelligence analyst, or related function/role.
• Technical background/expertise in manufacturing operations & requirements for chemicals (solvents, basic & specialty chemicals, lab/pharma-grade)
• Good understanding on the cost profile/structure in chemicals manufacturing (raw material, process, overhead, regulation).
• Effective MS Office skills (Excel, PowerPoint, Word).
• Data analytics, digitalization & AI skills are a plus.
• Ability to independently manage and execute multiple projects in parallel, and drive resolutions of complex problems.
• Effective communication & collaboration with internal and external stakeholders, globally.

Job :

Handle daily production escalation. Provide strong technical support to production team .

Ability to read technical drawings, understand BOMs, and use a variety of precision testing and measuring Instruments

Provide solution to CSE (customer support engineer) when there is field escalation.

Dispose non-conformance products and work closely with supplier on the quality and process continuous improvement.

Response to failure analysis and provide comprehensive analysis report to field support team or customers.

Work with material team on the product cost reduction, EOL component replacement, relocation of manufacturing site, and any engineering support needed from them.

Understand Manufacturing process and propose improve quality and cycle time

Creating ECO (Engineering Change Orders), Structuring BOMs and creating test and assembly documentation .

Involve in product development and evaluate the design for manufacturability and reliability.

Provide feedback on design changes .

Work with suppliers to resolve component/yield/part problems in a timely manner .

Perform First Article qualifications for parts and EOL components.

Requirements

Master’s degree/Bachelor’s Degree in Electrical/Electronics Engineering with 2 or more years of experience in Semicon Equipment manufacturing.

Degree in Electrical Engineering without prior working experience are welcome

Hands-on experience in assembly, alignment, calibration, sub-system integration, and testing of wafer inspection system.

Strong troubleshooting and analytical skills to support technical issues, set-up experiments, and perform data analysis.

Good understanding of optical, mechanical, electrical, and software components involved in the design and development of motion system, semiconductor inspection equipment or equivalent is a plus

Able to travel up to 20% of the time

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Please email your resume in a detailed MS Word format to [email protected] stating

1) Current Drawn

2) Expecting Salary

3) Date Available

4) Reason to Leave each job:

We regret that only shortlisted candidates will be notified

Joyce Koh Ai Leng

People Profilers Pte Ltd

20 Cecil St, #08-09, PLUS Building, Singapore 049705

Tel: 6950 9737

www.peopleprofilers.com

EA License Number: 02C4944

EA Personnel Reg nos R1110618

Job Id: L4W7Y767

• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

We are seeking a Manufacturing Engineer to join our team at a leading US multinational in the semiconductor and electronics industry. The role involves managing production processes, ensuring efficiency, and solving technical issues in a fast-paced manufacturing environment.

Key Responsibilities:

• Oversee production operations to optimize processes and ensure quality standards.
• Implement continuous improvement initiatives to enhance production efficiency.
• Troubleshoot and resolve technical issues on the production floor.
• Collaborate with cross-functional teams to meet production goals.
• Maintain equipment performance and support preventive maintenance.

Qualifications:

• Degree in Engineering (Electrical, Mechanical, or related field).
• 2+ years of experience in manufacturing, preferably in the semiconductor or electronics industry.
• Willingness to work 12-hour shifts (day/night)

For interested applicant, kindly send your resume in Word/PDF format to include the following in your resume:

1. Current Salary
2. Expected Salary
3. Availability
4. Reason for leaving

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

License No: 23S1595

Registration No: R23116355

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Manufacturing Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Mon – Fri, 8.00 am – 6.00 pm)
• Salary Package: Basic salary up to $4,300 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Help with New Production Introduction tasks: develop manufacturing processes, design tools, create schedules, control costs, support sourcing, qualify quality, support tests, reduce product costs, and introduce products into the supply chain.
• Lead technical aspects of manufacturing processes for cables, harnesses, mechanical assemblies, inspections, and testing, including designing tools and fixtures.
• Utilise knowledge of electrical/electronic equipment production and testing methods.
• Manage multiple priorities under tight deadlines to successfully complete and make projects profitable.
• Collect data and create manufacturing solutions and documents to support OMS, SOE, MI, drawings, and specifications.
• Perform assembly tasks and guide technicians/operators as needed.

APPLY NOW!!!

• Diploma or Degree in Electrical / Mechanical Engineering or a related professional certification.
• Proficient in Microsoft Excel to compare and study Bill of Materials (BOM).
• 2-5 years of relevant experience in related industry.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67156 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Regional role to drive enhancement of factory in APAC and designated area as requested by head office (MID, Japan) As a team member of Manufacturing Innovation Centre, to analyze factory's operation and find gaps in their processes.

Key duties include: -

1. Enhancement of production operation (Industrial engineering, site survey, factory diagnosis & implement activities including digitalization of factory/processes).
2. Drive digital transformation roadmap with digitalization use cases, IT Infrastructure, Data connectivity, leveraging technologies like smart / flexible automation, paperless manufacturing, BI tools, AR / VR, Big data analytics.
3. Support product cost working group, assure parts quality, thru’ enhancement of production cost structure, product planning & development process. (Cost ITAKONA WG collaboration)
4. Organize & conduct training/seminar as part of our team effort towards digital transformation and enhancement of factory activity.
5. Some level of administrative work required as part of MIC operation.

Qualifications:

• Bachelor’s degree in Engineering or a related field will be appropriate. Diploma with extensive experience may be considered.
• 3-5 years’ experience in factory enhancement activities and digital transformation.
• Able to understand product development process, manufacturing process, digital transformation (including understanding of Big Data Analytics, AI etc.)
• Good IT knowledge and experience in OT environment (manufacturing).
• Individuals with experience of programming languages like Python, Java, C++, or SQL will be an added advantage.
• A team player, self-motivated, innovative & agile. Possesses critical thinking abilities in order to improve application performance and resolve technical issues.
• An individual, with honest work ethics and excellent communication skills to provide a superior users engagement.
• Able to travel overseas frequently within APAC and occasionally outside APAC; e.g. India, China, Europe, etc.
  
  

Responsibilities:

• Drive optimization of plant capacity, equipment uptime and yield by safe, disciplined & cost-effective operations.
• Provide facilitative leadership and technical expertise in the daily operations of the unit to assist operators in resolving performance gaps vs. production plan.
• Optimize equipment maintenance and/or plant turnaround based on business requirements and/or production schedule.
• Review and reduce energy consumption through implementation of programs, initiatives and projects in the process and utility areas.
• Drive the development and enhancement of the skills of shift team technicians.
• Promote quality culture and drive work discipline in day and shift team operations.
• Participate in review of process and operations (through process safety management) to enhance process safety.
• Develop and lead data-driven productivity initiatives.
• Work with Reliability Engineers in identification of root cause for equipment failure and development of long-term resolutions.

Requirements:

• Bachelor’s degree in chemical, Mechanical or Electrical Engineering
• At least 2 years’ relevant experience in technical/operations function in petrochemical/chemical manufacturing.
• Those without experience but are interested in Chemical Engineering are encouraged to apply.
• Demonstrated ability to understand and apply technical knowledge in chemical process.
• Resourceful and possess excellent analytical & interpersonal skills.
• Willing to work in 12-hour rotating shift environment.

ASM is a leading global supplier of products, services, and materials for semiconductor processing. For more than half a century, innovation has been at the core of everything we do. Our smart, ambitious people are dedicated to creating cutting-edge solutions for the world’s leading semiconductor providers. Every day we push the development of next-generation computer-chip technology, always staying a few steps ahead of what’s next.

The talented, enthusiastic people at ASM are just like you: dedicated to improving people’s lives and unlocking new potential. With our collaborative approach to R&D, we advance key semiconductor technologies and platforms like ALD, epitaxy, PEALD, PECVD, and vertical furnaces. And we have recently entered the promising high-growth market: silicon carbide epitaxy. Year after year, our innovations help to make chips smaller, faster, and more powerful. In fact, you will find our technology in every aspect of modern life: in AI, medical equipment, 5G, smartphones, autonomous driving, and more.

Job Description

• Partner with the Global Operations (GOPS) team (Manufacturing, Production Planning, Procurement, and Quality Engineering) with emphasis on manufacturing processes, cycle time, assembly sequence, and quality.
• Provide first line engineering support in resolving daily operation issues in semiconductor equipment manufacturing, through collaboration with a team of multidisciplined manufacturing engineers, manufacturing supervisors and technicians.
• Achieve daily targets on product delivery to global customers in alignment with manufacturing engineering strategies, production schedules, quality and safety standards.
• Perform systematic troubleshooting and root cause analysis of manufacturing issues and deviations, provide immediate containment actions, and pursue long term corrective solutions.
• Define and create manufacturing procedures, build sequence, methods, and quality documentation (i.e. work instructions, test procedures, inspection checklists, etc.) according to material and assembly specifications.
• Drive timely solutions for the suppliers, contract manufacturing, and internal manufacturing by liaising with cross functional teams in GOPS and Business Units (BU).
• Lead the execution of continuous improvement projects on quality, cost, capacity, and efficiency enhancement with cross functional teams in GOPS and BU.
• Deliver tooling and test equipment according to product requirements, with innovations in meeting manufacturing efficiency and customer quality.

Prerequisities

• Minimum 5 years of experience working in a manufacturing or engineering environment with hands-on engagement on manufacturing and productivity activities.
• Minimum Bachelor’s Degree in Mechanical/Electrical/Electronic/Materials/Manufacturing Engineering.
• Experience within the Semiconductor/Capital Equipment industry in Manufacturing, Quality and/or engineering roles in equipment assembly and test
• Knowledge on material fabrication processes, component installation, sub-assembly and final assembly integration, preferably for CVD/ALD/Epitaxy equipment
• Understanding on Bill of Material structure (Product structure, Generic vs. Customization, Options and Kits) and revision changes
• Experience in working and interfacing with cross functional teams. Demonstrated ability to influence cross functional organization and drive changes.
• Familiar with the following operational excellence tools but not limited to: Lean Manufacturing, FMEA, 8D, PDCA, DMAIC, 6-sigma, Cpk, GR&R and SPC.
• Experience in New Product Introduction or technology transfer
• Experience with SAP ERP systems and processes at user level

At ASM we are committed to supporting our people, enabling them to develop their talents and perform at their best. We actively promote an inclusive and diverse culture that fosters trust and transparency. Our people are our power, and we value the differences between everyone because it is what make us better as a team. By embracing a wide range of perspectives, we enable a culture of continuous exploration and adoption of new ideas. At every step, we know that it is our valued people who enable us to deliver excellent products and service to our clients – and to make a meaningful difference in society.

So join us on our journey and unleash the power of an open mind. Discover how you can be part of our exciting future and apply today! To learn more about ASM, find us at asm.com and on LinkedIn, Facebook, Instagram and YouTube.

• Setup and troubleshooting of semiconductor equipment and record engineering improvements for future reference
• Build procedures for assembly, inspection and testing of equipment

Requirements:

• Diploma in Mechanical/Mechatronics Engineering
• At least 2 years of experience in setting up automation equipment
• Knowledge of Electro Mechatronic System

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our Client is a leader in the Manufacturing MNC. Due to their current expansion plan, they are looking for a Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibility:

• Responsible in production planning and control processes
• Handle manpower allocation/planning and participate in HR-related activities.
• Manage order processing and related documentation tasks.
• Work closely with Sales and Quality departments to resolve production issues.
• Track and monitor production schedules to meet delivery timelines.
• Prepare and submit detailed monthly production reports.
• Involve in process improvement initiatives.
• Any other ad-hoc duties as assigned.

Requirement:

• Minimum Diploma in Engineering related studies or equivalent
• Minimum 2 years relevant experience
• Proficient in Microsoft Office application

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Job Summary:
We are looking for a dedicated Production Engineer to oversee and enhance production operations, ensuring an efficient and safe manufacturing process in our chemical products division. This role involves close collaboration with cross-functional teams to address corrective and preventive actions and to drive improvements through process optimization and benchmarking.

Key Responsibilities:

• Oversee daily production operations to ensure efficiency and compliance with safety and quality standards.
• Work with cross-functional departments to implement effective corrective and preventive measures.
• Lead improvement activities, including process optimization and benchmarking, using statistical tools and relevant software.

Qualifications:

• Bachelor’s degree in Chemical Engineering or related field.
• Proven experience in a chemical manufacturing environment.
• Strong analytical skills, with proficiency in process optimization and statistical software.
• Excellent communication and problem-solving abilities.

For interested applicant, kindly send your resume in Word/PDF format to include the following in your resume:

1. Current Salary

2. Expected Salary

3. Availability

4. Reason for leaving

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

License No: 23S1595

Registration No: R23116355

• New Product process design and line setup.
• Understand SAP concept and align process design
• Work closely with local and HQ (Japan) designers on product change requirements, plan with the local group of members.
• Draft the implementation schedule to meet target date, disseminate and finetune the scheduled with production PICs for the implementation to be carried out smoothly.
• Follow up with related members and enforce the usage of systems developed for operation change tracking.
• Understand key functions and product master setting rules of ERP (SAP) system, process-related inline systems, traceability requirements, to align the process design with the systems.

Requirements:

• Diploma/Degree in Engineering Electrical & Electronics.
• Prefer 2 year(s) of working experience in the related field in the PCB manufacturing environment.
• Good statistical and analytical skills.
• Good communication, planning and coordination skills.
• Entry level are welcome as training will be provided.
• Travelling to Batam Factory and staying for project (min. 2weeks to max 2 months stay per visit depending on project requirements.

Electronics Manufacturing Industry

East Area/Bedok Area

5 days work week

Interested candidates, please forward a detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

To be part of the development team, involving in Automated Test Equipment (ATE) development for new product, duplication of existing ATE for BCP, and in-line systems development/ maintenance/ upgrading/ function add-on when required.

Line support is also part of the main scope of work, whereby analysis/trouble shooting job on the system, needs to be carried out when there is breakdown or high failure. The ability to do fast diagnosis and segregation of problems is an essential skillset, due to the need to minimize down-time of production line.

Requirements:

• Brief outline of main duties and reporting structure:
  In-line system link-up/Design
• Understand SAP concept and align process design.
• Work closely with local and HQ (Japan) Designer on new product testing specification.
• Develop Automated Inspection System for Product Testing (VB6, VB.Net. C#, MSSQL)
  Understand key functions and product master setting rules of our ERP (SAP) system, process-related inline systems, traceability requirements, to align the process design with the systems.

Requirements:

• Diploma/Bachelor's degree Electrical/Electronic Engineering with Programming skills
• Minimum 2 years of experience in related field
• Proficient in VB6 and VB.Net Programming, SQL Programming
• Strong background in Electronic circuitry
• Able to travel to Indonesia (Batam) / Japan for work when required Improvement
• Travelling to Batam Factory and staying for project is necessary (Min. 2weeks to max 2months stay per visit depending on project requirement)

Manufacturing Industry

East Area/5 days

Japanese MNC

Interested candidates, please forward a detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

We are seeking an experienced and forward-thinking Investment Project Engineer to join our team and be stationed in Singapore. This pivotal role will focus on supporting and driving investment projects to ensure stable and sustainable investment for future growth.

The ideal candidate will play a crucial role in establishing a consistent organization dedicated to long-term investment stability, collaborating closely with both the Japan Mazak staff and the YMS investment team.

Key Responsibilities:

· Lead and support investment projects, ensuring they align with the company's strategic objectives.

· Collaborate with Japan Mazak and cross-functional teams to support YMS investment initiatives, technical requirement and ensure seamless project execution.

· Establish and maintain a consistent organizational framework to ensure future stable investment.

· Conduct thorough reviews of current manufacturing processes and identify areas for enhancement.

· Develop and manage project budgets, timelines, adherence to design specifications and resource allocations.

· Foster strong relationships with internal and external stakeholders to facilitate successful project outcomes.

· Conduct risk assessments and develop mitigation strategies to ensure project success.

· Serve as a key point of contact and resource for manufacturing investment-related inquiries and initiatives.

· Prepare detailed reports and presentations for senior management, highlighting project progress, challenges, and opportunities.

· Stay abreast of industry trends and technological advancements in machine tool manufacturing that could impact investment strategies.

Job Requirements

Education:

· Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Project Management, or a related field.

Experience:

· A minimum of 5-7 years of experience in managing and supporting large-scale investment projects, with a specific focus on equipment manufacturing.

· Proven track record of successfully leading investment initiatives within the equipment manufacturing industry.

· Extensive experience working within Japanese business culture and practices, ideally in a multinational corporation.

Technical Skills:

· In-depth knowledge of equipment tool manufacturing processes, technologies, and industry standards.

· Proficiency in Microsoft Application and possess strong knowledge and mastery of 2D CAD, SolidWorks software, etc

· Strong financial acumen with experience in budgeting, forecasting, and financial analysis related to investment projects.

· Excellent understanding of risk management principles and the ability to develop and implement effective risk mitigation strategies.

Soft Skills:

· Exceptional leadership and organizational skills with the ability to manage and mentor project teams.

· Strong communication and interpersonal skills, with the ability to effectively collaborate with cross-functional teams, stakeholders, and senior management.

· Bilingual proficiency in Japanese and English, with excellent written and verbal communication skills in both languages.

· Strategic thinking and problem-solving abilities to anticipate challenges and devise effective solutions.

Professional Attributes:

· Demonstrated ability to establish and maintain consistent organizational frameworks to support stable future investments.

· Commitment to continuous improvement and innovation in investment project management practices.

· High level of integrity and professionalism in all aspects of work.

Industry-Specific Experience:

· Extensive knowledge of the equipment manufacturing industry, including current trends, challenges, and opportunities.

· Experience in evaluating and integrating new technologies and processes in the equipment manufacturing sector.

· Familiarity with regulatory requirements and standards specific to equipment manufacturing.

Cultural and Business Acumen:

· Deep understanding of Japanese business etiquette, culture, and communication styles.

· Experience in navigating and bridging cultural differences in a global business environment.

· Ability to build and maintain strong relationships with Japanese and local stakeholders.

Manufacturing Engineer (Machining)

This position reports to the Technical Manager and is responsible to provide technical support to the machine shop and subcontract vendors on complex machining methods for both Premier Hytemp Singapore and Malaysia. Technical support may involve design tooling, fixtures, and machining methods for complex features and new product qualifications. The Manufacturing engineer is responsible to lead acquisition and implementation of latest technology (machines) to improve capability and efficiency.

Responsibilities

• Evaluation of complex machine drawings for manufacturing
• Propose and implement tooling & fixtures for machining of complex features
• Support Manufacturing team on new product qualifications and ensure manufacturing is achieving most optimized and competitive hours
• He or she must have strong knowledge on CNC machining process with strong understanding and capability to design fixture or use on best tooling to achieve optimized and competitive machining capability
• Work with Procurement team to develop strategic sub-con machining supplier
• Source and develop new relevant and good machining vendors to company’s approved vendor list
• Provide technical guidance and ensure supplier passes first article approvals
• Involved in daily MRB (Material Review Board) meeting to provide technical input for jobs when non-conformance occurs
• Continuously seek and work on cost savings and new customer development projects
• Initiate and lead continuous improvement projects

Requirements and Qualifications

• Minimum Degree or Diploma in Mechanical Engineering or related field with at least 5+ years of relevant experience
• Candidate should have a strong background in CNC machine shop environment
• Exposure to machining of complex parts for oil & gas equipment is preferred
• Good mechanical / technical skills
• Good understanding of ANSI, ASME Standards and API Products requirements
• Proficient in design and programming software like AutoCAD, Solidworks & MasterCam etc
• Strong communication and analytical skills, team player, energetic and willing to work hard
• The candidate needs to be self motivated with positive attitude and seek career growth
• Ability to prioritize and multi-task in a fast-paced environment

Job Description

• Provide engineering support for wide range of products (RF/Mixed Signal / Digital) through all phases from development to production release
• Work closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement
• Close interaction with Product Test Engineering team and Communicate technical product status to management
• Establish with customers on product testing requirements and production release requirements
• Follow up with Foundries and test subcontractors/SAT houses to resolve all production issues.
• Provide detailed status reports at each phase, test limit (guard band) generation, correlation and yield summary reports
• Support Yield improvement, Test Time Reduction and retest rate improvement for production ramp

Job Requirements

• Degree/Diploma in Electronics / Electrical Engineering
• Minimum one year relevant experience on the Product/Test Engineering with foundry process background preferred.
• Solid understanding of test concepts on digital , Mixed Signal and RF products
• Hands on experience using Advantest 93K ATE is added advantage.
• Good experience with statistics and data mining.
• Strong Data analysis skill & exposure on any Statistical Analysis Software’s JMP, CEDA or Data power and Optimal plus tool knowledge is a plus.
• Knowledge in scripting (perl/java/vba) and automation in reporting is a plus.

A well established company located at the west of Singapore is looking for qualified individual to join them as Production Engineer

Responsibilities

1. Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.

2. Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.

3. Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.

4. Work with HR Department and assure that employee grievances are addressed in a timely fashion.

5. Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.

6. Maintain and improve housekeeping in all areas.

7. Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.

8. Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.

9. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.

10. Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.

11. Maintain and update operating manuals for all the manufacturing equipment and facilities.

12. Maintain and update operating training manuals for all manufacturing processes.

13. Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Job Requirement

1. Minimum 5 years working experience in manufacturing environment.

2. Able to supervise and lead the subordinates.

3. Willing to work after working hour or during non-working days when needed.

4. Able to work under pressure.

5. Computer literate.

6. Knowledge in ISO is an advantage.

7. Diploma or Degree in Manufacturing / Electrical /Mechanical / Engineering discipline.

Salary Package

$3,500 to $4,000

5 Days week

We are seeking a talented and motivated Product Design Engineer to join our dynamic team. As a key member of our product development group, you will play a crucial role in designing innovative products from concept to production. You will collaborate closely with cross-functional teams to ensure that our products meet high standards of quality, functionality, and manufacturability.

Responsibilities:

• Lead the design and development of new products, from initial concept through to production release.
• Create detailed 3D models, drawings, and specifications using CAD software (e.g., SolidWorks, AutoCAD).
• Conduct feasibility studies and analysis to evaluate product designs for performance, safety, and manufacturability.
• Collaborate with manufacturing and quality assurance teams to address design-related issues and optimize production processes
• Research and draft blueprints, engineering plans, and graphics.
• Develop test prototypes.
• Identify solutions to improve production efficiency.
• Use design software to develop models and drawings of new products.
• Maintain existing engineering records and designs.
• Assess all engineering prototypes to determine issues or risks.
• Estimate cost limits and budgets for new designs.
• Supervise the manufacturing process of all designs.
• Coordinate with other engineers, management, and the creative department.
• Obtain Ingress Protection certification

Requirements:

• Bachelor’s degree in Mechanical Engineering, Product Design, or related field.
• Proven experience in product design and development, preferably in Dones technology
• Proficiency in CAD software (SolidWorks preferred) and other relevant engineering tools.
• Strong understanding of manufacturing processes and materials.
• Excellent problem-solving skills and attention to detail.
• Ability to work effectively both independently and as part of a team.
• Strong communication skills to effectively collaborate with internal teams and external partners
• Knowledge and experience in designing, fabricating and sending the products for IP rating certification.

• Handle the Precast Concrete Production in the factory.
• Understand the design drawings and production drawings and conduct quality check.
• Liaise with all the relevant parties for production and inspection of the factory.
• Manage the Suppliers and Contractors to rectify if there are any defects prior to delivery to site.

Requirements:

• Diploma in Civil Engineering or equivalent
• At least 4 years of PPVC and/or PBU Production control experience.
• Proficient with ICTs, Digital Progress control/monitor.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Scope:

• Read and understand the Engineering and Stage drawings
• Understand all GD&T symbols to be able to read apply for CNC programming.
• Create the Offline CNC programs using UG NX 7.5/8.5/10 and above for Aerospace components
• Component prove out on Machining, Turning and Turn mill and 5 Axis centres
• Readout CNC codes including probing cycles for program creation
• Simulation using Vericut software and beginner level knowledge on Machine and Control building in Vericut
• Strong fundamental knowledge in Manufacturing Engineering
• Generate 3D models using NX

Job Requirements:

• Read and understand the Engineering and Stage drawings
• Understand all GD&T symbols to be able to read apply for CNC programming.
• Offline CNC programs using UG NX 8.5/9/10 and above for Aero engine and Structural components is mandatory
• Knowledge of Team centre functions will be
• Should be proficient enough to generate 3D models using NX
• Optimization in Programming and machining techniques
• Awareness of aerospace quality requirements

Job Opportunity: Manufacturing Engineer
Industry: Biologics Pharma
Location: Kranji
Contract Duration: Till end of March 2025
Salary: Up to S$5,500
Working Hours:

• Weekends (WFH): Both Saturday and Sunday, 12-hour shifts (7:30 AM to 7:30 PM)
• Onsite: 2 weekdays, 8 hours each day (flexible start time, likely 8 AM - 4:30 PM)
• Note: Total of 40 hours per week. Availability on weekends is preferred for supporting operations.

Primary Responsibilities:

• Manage and resolve atypical production situations such as outages or critical alarms, taking corrective actions to ensure safe and quality operations.
• Collaborate with production teams for stability and continuous improvement of processes.
• Identify and implement operational optimizations.
• Provide weekend support for urgent manufacturing needs.
• Participate in manual intervention remediation projects, perform testing, and ensure compliance with EHS and company standards.

How to Apply:
Submit your resume to Jocelyn Chan at [email protected] or contact via Telegram @jocelynchan.

Jocelyn Chan | Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience)
Company EA Licence Number: 99C4599
Personnel EA License: R1331820