Total 2,032 process development engineer job vacancies in Manufacturing / Production category in Singapore

• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Handle the Precast Concrete Production in the factory.
• Understand the design drawings and production drawings and conduct quality check.
• Liaise with all the relevant parties for production and inspection of the factory.
• Manage the Suppliers and Contractors to rectify if there are any defects prior to delivery to site.

Requirements:

• Diploma in Civil Engineering or equivalent
• At least 4 years of PPVC and/or PBU Production control experience.
• Proficient with ICTs, Digital Progress control/monitor.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

The Job:

• Develop manufacturing process by studying the product requirement, Design, modifying and testing manufacturing method
• Improving manufacturing efficiency by analysing the planning and process flow, space requirement and equipment such as implementing the new tooling technology and designing the jig and fixture
• Creating the new part master and master routing process
• Maintaining and controlling the Part Master data record.
• Working with other engineers such as Design Engineer, Product Engineer, and Fabrication Engineers to ensure all product and system requirements are taken into account from the initial product conception to the finished result

The Requirements:

• Min Degree with min 5-8 years of relevant working experience from Manufacturing or Oil and Gas Company
• Proficient in MS Office
• Good communication and interpersonal skills

Interested applicants can send their detailed resumes to [email protected] or call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg. No. 199601303W || EA Licence No. 99C4599

JOB RESPONSBILITIES:

• Provide technical support for manufacturing operations
• Conduct process validation
• Perform maintenance, troubleshooting and calibration on Machines / Equipment
• Liaise with supplier on all technical purchases
• Co-ordinate with supervisor / leader on production schedule / audit / stock take etc.
• Any other tasks assigned by superior by time to time.

JOB REQUIREMENTS:

• Diploma in Electrical / Mechanical Engineering or related discipline (Must if they do not have relevant work experience)
• Rotating Shiftwork (Day & Night) - Monthly Rotation
• Work in cleanroom environment - Required to wear cleanroom uniform

All qualified applicants, please click “ APPLY NOW”

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

JOB RESPONSBILITIES:

• Provide technical support for manufacturing operations
• Conduct process validation
• Perform maintenance, troubleshooting and calibration on Machines / Equipment
• Liaise with supplier on all technical purchases
• Co-ordinate with supervisor / leader on production schedule / audit / stock take etc.
• Any other tasks assigned by superior by time to time.

JOB REQUIREMENTS:

• Diploma in Electrical / Mechanical Engineering or related discipline (Must if they do not have relevant work experience)
• Rotating Shiftwork (Day & Night) - Monthly Rotation
• Work in cleanroom environment - Required to wear cleanroom uniform

All qualified applicants, please click “ APPLY NOW”

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Manufacturing Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Mon – Fri, 8.00 am – 6.00 pm)
• Salary Package: Basic salary up to $4,300 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Help with New Production Introduction tasks: develop manufacturing processes, design tools, create schedules, control costs, support sourcing, qualify quality, support tests, reduce product costs, and introduce products into the supply chain.
• Lead technical aspects of manufacturing processes for cables, harnesses, mechanical assemblies, inspections, and testing, including designing tools and fixtures.
• Utilise knowledge of electrical/electronic equipment production and testing methods.
• Manage multiple priorities under tight deadlines to successfully complete and make projects profitable.
• Collect data and create manufacturing solutions and documents to support OMS, SOE, MI, drawings, and specifications.
• Perform assembly tasks and guide technicians/operators as needed.

APPLY NOW!!!

• Diploma or Degree in Electrical / Mechanical Engineering or a related professional certification.
• Proficient in Microsoft Excel to compare and study Bill of Materials (BOM).
• 2-5 years of relevant experience in related industry

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67156 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer
• Working Location: Kallang
• Working Hours: Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + VB
• Duration: Permanent

Key Responsibilities

• Set up and troubleshoot semiconductor equipment.
• Document engineering enhancements for continuous improvement and future reference.
• Develop procedures for the assembly, inspection, and testing of equipment.
• Collaborate with the engineering and software teams to enhance system designs.
• Work alongside cross-functional engineering teams to troubleshoot and resolve system issues.

APPLY NOW!!!

• Minimum Diploma in Mechanical or Mechatronics Engineering.
• At least 3 years of experience in setting up and managing automation equipment.
• Possesses a thorough understanding of electromechanical systems.
• Willingness to travel internationally for field support as needed.
• Availability to work overtime when required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67592 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Associate Manufacturing Engineer
• Working Location: Kallang
• Working Hours: Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $3,500 + VB
• Duration: Permanent

Key Responsibilities

• Prepare, set up, and qualify machines for operation and ensure their readiness before packaging and shipment to customers.
• Provide on-site service support occasionally, both locally and internationally.

APPLY NOW!!!

• Minimum NITEC in Mechatronics.
• At least 2 years of relevant working experience.
• Proficient in mechanical and electrical control systems.
• Strong understanding of machinery automation including electrical components, servos, sensors, and pneumatic systems.
• Skilled in reading mechanical drawings, using measurement tools, performing I/O checks, and troubleshooting.
• Knowledge of mechanical alignment, motor tuning, and vision systems is a plus.
• Basic knowledge of PC systems, setup, and application programming.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67593 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Title

IT Production Support Engineer

About Bank

The Bank Department provides software and system development, information technology support services and banking operations.

We have centralized and standardized the technology components into Singapore, creating a global footprint which can be utilized for supporting our regional subsidiaries and the branches around the world. We operate and support 19 countries with this architecture to provide a secure and flexible banking infrastructure.

Our Operations divisions provide transactional customer services for our businesses while also focusing on cost efficiency through process improvements, automation and straight through processing.

Job Objectives

The specialized First Recovery Support IT Production Support Engineer is responsible to support application wellness in production systems, Managing monitoring of system exception emails, help desk incident assignments and distribution within teams.

Closely follow-up and monitor issue from investigation, pass relevant details to L2/L3 team.

Make sure system availability as per SLA across countries for multiple applications / interfaces. Perform scheduled health check tasks across applications and raise alerts in case required.

Able to work in shift-based environment, support implementations during bank’s green zone

Core Key Responsibilities

• Handle incidents and service requests raised via helpdesk and call center.
• Receive and prioritize emails based on urgency; reallocate within support teams and help in recovery actions to meet the TRO.
• Monitor the incoming demand through ISM tool and ensure right assignments on time.
• Perform scheduled tasks within Service Level Agreements (SLA) referring to standard operating procedures (SOPs).
• Manage service requests recording for monthly management reporting.
• Follow SOP to identify potential issues and escalate to the shift lead for critical incidents or eMails.
• Ensure application incident & task documentation is properly updated for each production release.
• Enthusiastic, hardworking, pro-active, and goal-oriented, with excellent communication and presentation skills, demonstrated professionalism and attention to detail.

Key Requirements

• Strong written, oral communication skills and able to manage user
• Organized and resourceful.
• Adept at prioritizing, scheduling, and multitasking.
• Fast and eager learner.
• Experience with Microsoft tools.
• Ready to work in a shift environment

1. Develop manufacturing process by studying the product requirement, Design, modifying and testing manufacturing method
2. Improving manufacturing efficiency by analysing the planning and process flow, space requirement and equipment such as implementing the new tooling technology and designing the jig and fixture
3. Creating the new part master and master routing process. (UOM, Product Code, Costing method)
4. Maintaining and controlling the Part Master data record. Responsibilities may include: maintaining records of Manufacture and purchasing part
5. Working with other engineers such as Design Engineer, Product Engineer, and Fabrication Engineers to ensure all product and system requirements are taken into account from the initial product conception to the finished result
6. Working with other professionals, such as Accountants to manage standard costing and other cost issue
7. Supervising manufacturing process flow and sub-contractors process requirement to ensure effective communication in order to have the better control process flow.

Interested applicants may email resume to [email protected]

Cheryl Lee Shi Le (CEI Registration No: R1434624)

Recruit Express Pte Ltd (EA: 99C4599)

We are seeking a talented and motivated Product Design Engineer to join our dynamic team. As a key member of our product development group, you will play a crucial role in designing innovative products from concept to production. You will collaborate closely with cross-functional teams to ensure that our products meet high standards of quality, functionality, and manufacturability.

Responsibilities:

• Lead the design and development of new products, from initial concept through to production release.
• Create detailed 3D models, drawings, and specifications using CAD software (e.g., SolidWorks, AutoCAD).
• Conduct feasibility studies and analysis to evaluate product designs for performance, safety, and manufacturability.
• Collaborate with manufacturing and quality assurance teams to address design-related issues and optimize production processes
• Research and draft blueprints, engineering plans, and graphics.
• Develop test prototypes.
• Identify solutions to improve production efficiency.
• Use design software to develop models and drawings of new products.
• Maintain existing engineering records and designs.
• Assess all engineering prototypes to determine issues or risks.
• Estimate cost limits and budgets for new designs.
• Supervise the manufacturing process of all designs.
• Coordinate with other engineers, management, and the creative department.
• Obtain Ingress Protection certification

Requirements:

• Bachelor’s degree in Mechanical Engineering, Product Design, or related field.
• Proven experience in product design and development, preferably in Dones technology
• Proficiency in CAD software (SolidWorks preferred) and other relevant engineering tools.
• Strong understanding of manufacturing processes and materials.
• Excellent problem-solving skills and attention to detail.
• Ability to work effectively both independently and as part of a team.
• Strong communication skills to effectively collaborate with internal teams and external partners
• Knowledge and experience in designing, fabricating and sending the products for IP rating certification.

Product Sales Engineer

Location: Bukit Batok

Working Days: 5 Days

Working hours : 9am - 6pm

Salary : S$2,200-3,500 (not inclusive of transport allowance, bonus/commission)

Job Responsibilities:

• Develop a thorough understanding of our complete range of product
• Responsible for preparing quotations, proposal according to customers' requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analyzing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products.
• Industry: Electrical & Electronics

Requirement:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic
• Passion for automation, with creative and adaptive approaches

Skills

• PLC programmable logic controller programming, touch panel, Control And Automation

Interested Personal kindly contact WhatsApp :+65 8833 7969(Lydia)

OR

Email to : [email protected]

Lydia Chieng Zhi Yee Reg No: R1988890

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Summary

Identify, develop and drive strategic engineering initiatives particularly in relation to Quality, Cost, Productivity improvement. Lead NPI and Product Transfer Projects to successful completion.

Key acountabilities

• Responsible for site Engineering activities, identify and propose opportunities including Out/In-sourcing ideas, EOL management, alternate sourcing and others
• Lead NPI and Product Transfer projects to successful completion
• Initiate value engineering projects to enhance operational capabilities to meet new business needs and raise operational efficiency
• Lead material localization projects for improvements in product cost, quality and operational excellence
• Work closely with cross functional teams to understand engineering related issues in order to provide effective solutions
• Drive yield improvement, reduce COPQ and drive shopfloor productivity through automation and process enhancement
• Improve site Safety through hazard identification and prevention

Requirements

• Bachelor’s Degree in Engineering / Science disciplines
• At least 8 - 10 years of relevant experience in manufacturing engineering in Analytical instruments industry
• Experience in NPI and product transfers is preferred
• Knowledge in manufacturing process of analytical instruments such as Inductively Coupled Plasma- Optical Emission Spectroscopy (ICP-OES), Inductively Coupled Plasma- Mass Spectrometry (ICP-MS), Gas Chromatography (GC), Atomic Absorption Spectroscopy (AAS)
• Good oral and written communications
• Strong analytical and interpersonal skills
• Project Management experience and leadership skills
• Strong drive for results, balanced with effective decision making and problem-solving skills
• Lean manufacturing and Six Sigma Methodology
• Knowledge in ISO 9001, ISO14001 and ISO45001

About Our Client

• Manufacturing @ Jurong West
• Normal Working Hours
• Basic + VB

Job Description

• Process Optimization and Improvement - Analyze and optimize manufacturing processes to enhance efficiency, reduce costs, and improve product quality. Implement best practices and continuous improvement initiatives in steel drum production. Develop and refine process parameters to achieve consistent product specifications and high-quality output.
• Production Planning and Execution - Assist in planning and scheduling production activities to meet customer demand and delivery timelines. Monitor production performance, identify bottlenecks, and implement corrective actions. Collaborate with production teams to ensure smooth and efficient operations.
• Equipment and Technology Management - Oversee the maintenance, calibration, and operation of production equipment and machinery. Recommend and implement technological upgrades to enhance production efficiency and quality. Troubleshoot equipment issues and coordinate with maintenance teams for timely repairs and upkeep.
• Quality Assurance and Compliance - Ensure that all manufacturing processes comply with industry standards, regulatory requirements, and company quality policies. Conduct regular inspections and quality checks on raw materials, in-process products, and finished goods. Collaborate with quality control teams to address non-conformances and implement corrective actions.
• Safety and Environmental Management - Promote and enforce workplace safety standards to prevent accidents and injuries. Conduct safety audits, identify hazards, and implement corrective actions to mitigate risks. Ensure compliance with environmental regulations and promote sustainable manufacturing practices.
• Cost Control and Efficiency - Identify opportunities to reduce production costs without compromising quality. Implement lean manufacturing principles and waste reduction strategies. Track and report on cost-saving initiatives and their impact on overall production costs.
• Project Management - Lead or support projects related to process improvement, capacity expansion, and new product introduction. Coordinate with cross-functional teams to ensure project timelines, budgets, and objectives are met. Prepare project documentation, including timelines, budgets, and progress reports.

The Successful Applicant

• Minimum 4 years working experience in manufacturing environment
• With leadership experience and able to supervise and lead the subordinates
• Willing to work after working hour or during non-working days
• Knowledge in ISO is an advantage.

Reach out

Please submit your updated resume by using the APPLY NOW button

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to Kanry Search Singapore Pte Ltd’s PDPA and e2i’s PDPA.”

Kanry Search Singapore|24C2261

Sarah Lau|R22110930

• Closely collaborate with Project Manager and Engineers to support the fulfillment of contract obligations within timeline, cost and scope
• Manage and oversee project documentations and subcontractor matters.
• Perform system setup, testing of equipment, resolve technical issues. Would be good to have basic understanding in physical security system.
• Basic setup of network switches and able to perform network check.
• Testing of products in indoor/ outdoor environment

Requirements

• Diploma in Mechatronics / Electrical / Electronics / Computer Science / Computer Engineering in Information Technology, Information Systems, IT Security or Equivalent
• Strong organizational, good interpersonal, coordination and communication skillsGood technical, analytical and report writing skills.
• Knowledge in any of the following will be a strong plus:
  - Setup Operating System, Network System, Wireless System
  - Setup Security System e.g. Intrusion Detection System, CCTV System, Access Control System.
• Able to perform work independently and a team player.
• Able to work in remote open field under hot environment.
• Able to work till late night during night testing.

• Handle the Precast Concrete Production in the factory.
• Understand the design drawings and production drawings and conduct quality check.
• Liaise with all the relevant parties for production and inspection of the factory.
• Manage the Suppliers and Contractors to rectify if there are any defects prior to delivery to site.

Requirements:

• Diploma in Civil Engineering or equivalent
• At least 4 years of PPVC and/or PBU Production control experience.
• Proficient with ICTs, Digital Progress control/monitor.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Position : Production Engineer – Up to $4,500 – Seletar
• Location : Seletar
• Working hours : 5 Days Work Week – Monday to Friday: 8.30AM to 6.00PM
• Salary (commensurate with experience) : Up to $4,500 + Performance Bonus + 14 Days Annual Leave
• Duration : Permanent
• Industry : Aerospace

Responsibilities:

• Plan equipment, material, and manpower requirements to execute job orders
• Monitor the execution of production plan and resolve any potential issues in a timely fashion
• Monitor production progress and ensure that final product meets quality standards and customer specifications
• Escalate complex issues to Manager for resolution
• Analyse back orders, current orders, and upcoming orders to prioritize, plan, and schedule the production operations
• Work with Estimation, Purchasing and Production teams in coordinating and planning production activities to improve runtime
• Adhere to company standards and production policies to meet company objectives

Requirements:

• Minimum Diploma in Mechanical Engineering or equivalent
• Minimum 3 years experience in similar role
• Well verse in both manual and CNC machining
• Excellent knowledge in fabrication, aircraft jigs & fixtures, mechanical assembly, and aircraft maintenance tooling
• Able to read and understand technical drawings
• Proficient in MRP systems
• Bilingual in English & Mandarin to liaise with Chinese associates who can only speak mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Continuously monitor the operation of boilers, steam systems, and related equipment to ensure they are operating efficiently and safely.
• Diagnose and resolve mechanical, electrical, or operational issues with the boiler or steam system.
• Implement process improvements to enhance performance and reduce operational costs.

Requirements:

• Nitec and above
• At least 1 year of experience in operating DCS (Distributed Control System).
• Knowledge of boiler systems, steam generation, and associated mechanical and electrical systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Responsibilities

· Successful completion of delegated work packages or products in line.

· Responsible in preparation of product documentation (User manual, Datasheets, Procedures etc)

· Take decisions on Technical matters

· To mentor and advise field engineers on technical matters

· Collaborate with technical team, and work with vendors.

· Setup and perform Product Validation Test to qualify products developed.

· Ensures proper record keeping of all test data and test report

· Ensures that products meet compliance regulations.

· Support project engineer for new project testing

· Support field installation work (if required)

Qualifications / Requirements

· Degree in Electrical and Electronics Engineering Engineering or relevant

· Fresh Graduates are welcome

· Basic understanding of engineering principles

· Good communication skills

· Positive attitude

· Good team player with the ability to work with people from different level

· Knowledge on software programming languages such as C/C++/Python/Java will be an advantage

· Training will be provided

Position: Production Engineer

Monday – Friday (8.30am – 5.30pm)

Location: Pioneer

Salary: $3,300 to $4,500

Requirement:

• At least 2 years relevant experience in plant operation or manufacturing
• Process Degree in Mechanical / Electrical / Process Engineering or equivalent

Responsibilities:

Plant Operations

• Identify root cause and troubleshoot production and equipment issues, implementing corrective actions and process improvements.
• Provide technical support to ensure production line efficiency and reliability.
• Track and analyse machine and process parameters to provide feedback for problem resolution and to improve efficiency.
• Conduct feasibility studies, equipment criticality and risk assessments for production equipment and systems.

Plant Maintenance

• Maintain various technical documents/drawings such as equipment specifications, machine records, vendors list, spare parts list etc
• Interface with equipment vendors to understand maintenance requirements, spare parts availability and service contracts if any.
• Coordinate maintenance activities between different teams.
• Manage and upkeep plant critical spares

People

• Collaborate with production and tooling team to achieve targets, product quality, operational and productivity improvements.
• Ensure the use of safe work practices and behaviors.
• Encourage a culture of continuous improvement.
• Provide guidance and training to production team.

Other responsibilities

• Ensure compliance to QEHS requirements.
• Perform other duties as assigned by supervisor.

Low Yu Xuan Reg No: R24123804

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Job Description – Product Configuration & Obsolescence Engineer

• Responsible for configuration management and release management

• Responsible for obsolescence management

• Maintain product configuration status for hardware and software version control

• Execute product identification process and ensure part numbering and serial numbering are maintained

• Ensure compliance to ECO process for hardware, software and mechanical design changes

• Ensure implementation of approved ECO to production

• Manage electronic component obsolescence notification from service partner

Requirements

• Degree in Electronics or Mechanical Engineering with at least 2 years relevant experience

• Good working knowledge of configuration management, release management, ECO management and obsolescence management

• Working knowledge of PLM and PDM tools

• Ability to read schematic, PCB layout and mechanical drawings, is an added advantage

• Strong organisational skills and attention to detail

• Strong written and verbal communication skills

• Strong personal work ethics

• Able to work well independently and with cross functional teams

• Able to monitor and drive issues to closure in timely manner

• Able to work in deadline-oriented environment

• Willing to take up extra responsibilities

• Handle the Precast Concrete Production in the factory.
• Understand the design drawings and production drawings and conduct quality check.
• Liaise with all the relevant parties for production and inspection of the factory.
• Manage the Suppliers and Contractors to rectify if there are any defects prior to delivery to site.

Requirements:

• Diploma in Civil Engineering or equivalent
• At least 4 years of PPVC and/or PBU Production control experience.
• Proficient with ICTs, Digital Progress control/monitor.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Ensure machines are prepared, set up, and qualified before crating for shipment from the factory to customers.
• Provide occasional on-site service within Singapore and internationally as needed.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Benefits:

• Basic up $4500 + AWS + Bonus
• West
• 5days office hour

Job Scope:

• Identify and troubleshoot of production issue
• Provide technical support to the operation
• Ensure production line efficiency
• Track and analyse machine and process condition
• Ensure machine spare parts in sufficient level
• Ensure safety of the operation and perform safe work practise
• Documentation work

Job Requirements:

• Diploma/Degree in Electrical/Electronic Engineering or its equivalent is advantage
• Min 2 years relevant working experience

Please submit your updated resume in MS word format by using the APPLY NOW BUTTON.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Wei Yang (R21102313)