Total 1,744 systems engineer job vacancies in Manufacturing / Production category in Singapore

Our client is from Manufacturing industry. They are looking for a Engineer, Product Costing to assist their team for the next phase of their business. They are located in North.

Duties:

• Lead cost-saving initiatives through Value Analysis Value Engineering (VAVE) or Design to Cost (DTC).
• Ensure timely and well-tracked cost reductions.
• Oversee the product lifecycle from entry to end-of-life.
• Represent the organization in cost-related initiatives.
• Compile and provide necessary reporting.

Requirements:

• Minimum Bachelors Diploma/ Degree in Mechanical or Electrical Engineering
• Minimum 3 years of experience in commodity / project management with supply chain and engineering
• Experience in VAVE is required.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

• Handle assigned Product from design to end of life and prepare the NPI schedules and ensure to meet the timeline.
• Monitor the progress of the product start from design to New Product Introduction (NPI) and site transfer until production ramp up.
• Liaise with respective functional department and teams to clear the roadblocks of any issue related to assign products.
• Develop continuous product improvement costing, process etc.

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent
• At least 3 years of product transfer experience in Electronics industry.
• Able to multitask and good computer knowledge.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Location: Woodlands

Mon to Fri 8.30am to 5.30pm

Salary: $2800-$3800

US MNC-Have AWS & Good Bonus

Industry: Clean room manufacturing

Job Description

• Work closely with Process/Manufacturing Engineer to monitor and improve the process capability.
• Ensure the scrap, production yield and cycle time reduction targets are met.
• Review process issues, NCR and conduct failure analysis.
• Updating of Manufacturing work instructions/routers.
• Participate in cross-functional teams on various improvement projects.
• Conduct Evaluations/Special Build Request.
• Support QA for failure analysis and identification of corrective action for customer returns and internal CAR’s.

Requirements

• Nitec in engineering & above
• Minimum of 2 years experience in process environment

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Handle assigned Product from design to end of life and prepare the NPI schedules and ensure to meet the timeline.
• Monitor the progress of the product start from design to New Product Introduction (NPI) and site transfer until production ramp up.
• Liaise with respective functional department and teams to clear the roadblocks of any issue related to assign products.
• Develop continuous product improvement costing, process etc.

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent
• At least 3 years of product transfer experience in Electronics industry.
• Able to multitask and good computer knowledge.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• To provide industrial engineering support to shop production, internal & external customers in manufacturing process development, tools & fixture design and implementation, machines programming, procedure development as per engineering BOM requirement and business need
• Create manufacturing process (routing) and procedure (work instruction) per engineering BOM, quality plan and manufacturing process requirement.
• To provide the CAM software application support to CNC programming, including CAM software postprocessor improvement and creating new
• Design tooling and fixture as manufacturing process and operations’ needs.
• Design CNC machines programming and PLC recipe as process requirement and productions schedule.
• Analyze and continuously improve manufacturing process to achieve best production safety, quality, and cost performance.
• Evaluate and implement new manufacturing technology for shop operations objectives, manufacturing capability and capacity improvement.
• Develop and provide training for shop technicians for new products, process, tooling and others’ needs.
• Perform other technical support or projects as required
• Diploma / Degree in Mechanical / Manufacturing Engineering.
• Familiar with CAD / CAM 2D drawing and 3D modelling.
• Familiar with MS software

Veronica Neo Shen Hwa - [email protected]

Personnel Reg No: R1110855

Manpower Staffing Services (S) Pte Ltd

EA Licence No: 02C3423

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Our client is from Manufacturing industry. They are looking for a Engineer, Product Costing to assist their team for the next phase of their business. They are located in North.

Duties:

• Lead cost-saving initiatives through Value Analysis Value Engineering (VAVE) or Design to Cost (DTC).
• Ensure timely and well-tracked cost reductions.
• Oversee the product lifecycle from entry to end-of-life.
• Represent the organization in cost-related initiatives.
• Compile and provide necessary reporting.

Requirements:

• Minimum Bachelors Diploma/ Degree in Mechanical or Electrical Engineering
• Minimum 3 years of experience in commodity / project management with supply chain and engineering
• Experience in VAVE is required.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for reading, interpreting and drawing up technical drawing specifications
• Responsible in developing, coordinating, monitoring all aspects of the operational set up for projects assigned
• Responsible for working cross-functionally with different teams and organizations
• Responsible for applying Six Sigma/Lean Manufacturing methodologies for continuous process improvements and to improve operational efficiency

Requirements

• Min Nitec in Mechanical Engineering or relevant discipline
• Min 1 years of working experience in manufacturing industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

✅ATE Test Program Design and Development for new products (Production and Characterization Test)

✅Design/Develop Final Test Loadboard and Wafersort Probecard

✅Perform Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc

✅Solid digital and mixed-signal programming experience on ATE using C++/VB language, and scripting

✅Monitor and manage production test yields, maverick lots, engineering lots

✅Hands-on test debugging, RMA analysis, and improving test solutions (HW and SW)

✅Establish cost-effective production test solutions

✅Develop team technical competency.

✅Build product test plan, schedule, resources requirement and project tracking and execution.

✅Conduct product test and releases review, approve the test program releases.

✅Maintain and improve the product test process.

Requirements:

• Bachelor's Degree in Electrical/Mechantronic/Electronics
• 5-yrs ATE Test Program Development (C++ and/or VB)
• Experience in Test HW Development (Loadboard and Probecard)
• Knowledge on manufacturing process (fab, packaging, test)
• Hands-on development experience is must (Teradyne J750, Uflex ATE testers, IG-XL test)
• Development experience in Chroma and other main stream testers is advantageous
• Development experience with Teradyne ATE testers, Chroma and other main stream testers.

Interested applicants, please send in your updated resume by clicking “Apply Now”

Lin Weikang

Registration Number: R21102570

Workstone Pte Ltd

EA License Number: 19C9998

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Participate in new product development project from concept to launch
• Support and improve existing product lines
• Support activities to reduce production cost, lead-time and improve product reliability and quality
• Collaborate with external partners in joint product development projects
• Manage project scope, timelines, budgets, product specifications, production schedules, and any other deliverables
• Establish engineering specifications and production processes to meet technical, functional and quality requirements
• Coordinate and support manufacturing of prototypes and products to ensure reliability and quality of product
• Develop and perform assembly and test procedures for product according to specifications
• Identify and resolve all issues effectively to achieve all objectives
• Ensure proper documentation (including manuals) of all required information for product/projects
• Support product installations and any necessary diagnoses, troubleshooting, service, and repair
• Provide product training and support internally and distributors

Requirements

• Bachelor’s degree in Electronics, Electrical or System related Engineering
• 3-5 years relevant experience in product development
• A good team player with strong interpersonal communication skill
• Self-motivated and able to take ownership of appointed task to follow through to completion with little supervision
• Familiar with programming languages C and C++
• Knowledge on Windows OS
• Basic understanding on schematic and Gerber
• Working location is in Jurong East
• Singaporeans Only

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Industry: Marine

Permanent role

Location: West

Responsibilities:

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Clash checking in AVEVA
• Review and comment on various engineering documents
• Design & incorporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement form AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Etraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

Requirements:

• Min Diploma in Engineering
• Min 2 year of experience in relevant roles
• Strong communication skills to effectively coordinate with clients.
• Leadership abilities to supervise and coordinate with a team.
• Proficiency in producing accurate design / drawings.
• Proficient in 3D modelling process using AVEVA software.
• Competency in performing clash checking using AVEVA software.
• Ability to thoroughly review and provide constructive comments on various engineering documents.

Job ID: QX76VX7Y

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

+65 6950 9747

EA Licence Number: 02C4944

Registration Number: R1100011

EA Personnel: Carlo Antonio Dela Cruz

• Handle assigned Product from design to end of life and prepare the NPI schedules and ensure to meet the timeline.
• Monitor the progress of the product start from design to New Product Introduction (NPI) and site transfer until production ramp up.
• Liaise with respective functional department and teams to clear the roadblocks of any issue related to assign products.
• Develop continuous product improvement costing, process etc.

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent
• At least 3 years of product transfer experience in Electronics industry.
• Able to multitask and good computer knowledge.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Prepare, setup and qualify machines before shipping out from factory to customer.
• Support site service as to when required.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Carry out product engineering duties for integrated circuit (IC) products throughout all stages of product development and manufacturing.
• Collaborate with production test engineers and/or relevant stakeholders to maintain and enhance the program and hardware of existing products.

Requirements:

• Degree in Electronics Engineering or equivalent.
• At least 5 years of experience in Product Engineering.
• Proficient in Tape-out procedure, CMOS device, and IC process.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

• Perform ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design and create Final Test Loadboard and Wafersort Probecard
• Manage Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Responsible for test debugging, RMA analysis, and improving test solutions (HW and SW)

Requirements:

• Degree in Electrical/Electronic Engineering
• At least 3 years of ATE Test Program Development (C++/VB) experience with J750, UltraFlex, Advantest 93K, Advantest T2K test programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Job Description

• Industry/ Organization Type: Manufacturing/Aerospace Engineering
• Position Title: Manufacturing Engineer
• Working Location: Seletar Aerospace Park
• Working Hours: Monday – Friday, 8 am – 5.30 pm
• Salary Package: Up to $4000 + AWS + VB
• Duration: Permanent

Key Responsibilities

• Prepare production drawings by 2D drafting or 3D modelling using CAD software for design and build-to-print jobs.
• Carry out manufacturing process planning using ERP.
• Prepare Bills of Material from customer drawings or in-house designs.
• Provide technical support during fabrication phase in areas of machining, welding, and assembly.
• Provide technical support for outsourced parts fabrication.
• Collaborate with cross functions to ensure on-time delivery, quality and cost goals are met.
• Participate in continuous improvement projects as part of the lean manufacturing transformation.
• To use engineering tools to test and implement efficiencies in quality, manufacturing, assembly, and testing.
• To provide customer support/liaise/coordinate/follow-up with external customers on assigned projects.
• To monitor project deliverables.
• To facilitate collection of customer requirements during RFQ stage for design projects.
• Any other duties as and when assigned by the Management.

APPLY NOW!!!

• Minimum Diploma in Mechanical Engineering or other related discipline with at least 3 years of relevant experience.
• Ability to interpret engineering drawings and carry out drafting or 3D modelling work.
• Possesses good knowledge of machining processes and technologies.
• Possesses good project management and coordination skills.
• Proficient in MS Office applications, Adobe Acrobat, AutoCAD, NX and GD&T.
• Experience with CNC machining and machine measurement will be advantageous.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65848 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Facilitate machine preparation, setup, and qualification for shipment
• Occasionally support on-site services within and outside Singapore

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026