Total 32 job vacancies by Applied Materials South East Asia Pte. Ltd.

Job Description

Key Responsibilities

Assists in planning the daily work schedule within assigned territory to ensure completion of Preventive Maintenance and remedial maintenance.

Uses escalation policies as required to keep management informed of down situations.

Verifies and approves the operational quality of system equipment. Performs daily, weekly, monthly, quarterly, biannual, and annual periodic maintenance on systems within established time frames. Also performs wet cleans as required. Instructs customers in the operation and maintenance of systems. Troubleshoots and corrects process variations on systems partially with assistance from senior engineers.

Assumes responsibility for complete customer satisfaction within assigned accounts. Assists in planning, communicating, and co-ordinating support plans with customer management.

Performs start-up, warranty, paid service, and service contract activities. Performs TIER II start-ups within established time frames. Assists on TIER III start-ups. Provides technical assistance to less experienced Applied personnel. Uses training and experience to identify some process related system problems.

Serves as the Company liaison with the customer's front line management on administrative and technical matters for assigned projects. Assists in the preparation of and participates in customer meetings.

Develops and implements plans to increase productivity. Tracks equipment performance and plan uptime improvement. Has a working knowledge of Statistical Process Control. Utilises Quality Improvement Process methods and terminology.

Plans and executes support activities on a wide range of Applied Materials' systems. May need technical assistance in performance of daily responsibilities.

Functional Knowledge

• Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Business Expertise

• Has a good understanding of how the team integrates with others to achieve objectives

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

Key Responsibilities

1. Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
3. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
5. Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components
• Performs electro-mechanical assembly operations, troubleshooting and repair
• Identifies and corrects errors
• Observes all safety standards and maintain a secure, safe, clean and healthy work environment
• Attends required health and safety training and follows safety and security policies, procedures and practices
• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept
• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly
• Actively strives to prevent accidents and injuries
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components
• Enters data on computer terminal, such as progress, work expense and labor details
• May perform computer programming, repair or software
• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities
• Has good understanding of how the team integrates with others
• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods
• Good communication skills to exchange of information

*Please submit with detailed CV stating current, expected salary, and notice period

*Only shortlisted candidates would be notified

Job Description

Key Responsibilities

1. Assists in planning the daily work schedule within assigned territory to ensure completion of Preventive Maintenance and remedial maintenance.
2. Uses escalation policies as required to keep management informed of down situations.
3. Verifies and approves the operational quality of system equipment. Performs daily, weekly, monthly, quarterly, biannual, and annual periodic maintenance on systems within established time frames. Also performs wet cleans as required. Instructs customers in the operation and maintenance of systems. Troubleshoots and corrects process variations on systems partially with assistance from senior engineers.
4. Assumes responsibility for complete customer satisfaction within assigned accounts. Assists in planning, communicating, and co-ordinating support plans with customer management.
5. Performs start-up, warranty, paid service, and service contract activities. Performs TIER II start-ups within established time frames. Assists on TIER III start-ups. Provides technical assistance to less experienced Applied personnel. Uses training and experience to identify some process related system problems.
6. Serves as the Company liaison with the customer's front line management on administrative and technical matters for assigned projects. Assists in the preparation of and participates in customer meetings.
7. Develops and implements plans to increase productivity. Tracks equipment performance and plan uptime improvement. Has a working knowledge of Statistical Process Control. Utilises Quality Improvement Process methods and terminology.
8. Plans and executes support activities on a wide range of Applied Materials' systems. May need technical assistance in performance of daily responsibilities.

Functional Knowledge

• Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Business Expertise

• Has a good understanding of how the team integrates with others to achieve objectives

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

Performs standard Tier I procedures including wafer measurement.

Performs preventative maintenance and wet cleans independently. Assists senior engineers with corrective maintenance as needed.

Disassembles, cleans and rebuilds kits as part of kit management quality.

Learns and applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers.

Able to diagnose and resolve basic technical problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Has the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining a neat and orderly work area. Demonstrates a positive attitude in less than optimal customer situations.

Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

​

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Key Responsibilities

1. Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
3. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software
5. Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

1. Utilizes work orders, schematics, wiring diagrams, engineering specifications, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs a wide variety of electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
3. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software
5. Checks own work for conformance to specifications. Good working knowledge of job assignments. Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform build, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Business Expertise

• Has a good understanding of how the team integrates with others to achieve objectives

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

1. Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
3. Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software
5. Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Responsibilities

• Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components
• Performs electro-mechanical assembly operations, troubleshooting and repair
• Identifies and corrects errors
• Observes all safety standards and maintain a secure, safe, clean and healthy work environment
• Attends required health and safety training and follows safety and security policies, procedures and practices
• Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept
• Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly
• Actively strives to prevent accidents and injuries
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components
• Enters data on computer terminal, such as progress, work expense and labor details
• May perform computer programming, repair or software
• Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects

Requirements

• Able to develop analytical skills and application of scientific methods to perform a variety of activities
• Has good understanding of how the team integrates with others
• Able to recognize and solve typical problems that can occur in own work area without supervisory approval and evaluate and select solutions from established operating procedures and/or scientific methods
• Good communication skills to exchange of information

*Please submit with detailed CV stating current, expected salary, and notice period

*Only shortlisted candidates would be notified

Key Responsibilities

Performs standard Tier I procedures including wafer measurement.

Performs preventative maintenance and wet cleans independently. Assists senior engineers with corrective maintenance as needed.

Disassembles, cleans and rebuilds kits as part of kit management quality.

Learns and applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers.

Able to diagnose and resolve basic technical problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Has the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining a neat and orderly work area. Demonstrates a positive attitude in less than optimal customer situations.

Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

​

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Job Description

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Applies basic analytical skills or scientific methods or operational processes to perform straightforward activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Uses standard operating procedures or scientific methods to guide own work and solve standard problems

Impact

• Impacts own work

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.

Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.

Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.

Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software

Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes.

Other Requirements: This is a physically demanding position that often requires standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, the use of hand and power tools, and driving or operating heavy machinery including forklifts.

Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information