Total 39 lab manager job vacancies in Maintenance / Repair category in d22 jurong jurong island tuas

Responsibilities

• Prepare polymer additives for production usage.
• Carry out lab evaluation of finished products using testing equipment.
• Quality checks on finished products as well as production samples.
• Ensure proper documentations of results, equipment and consumables.
• Ensure proper sample management according to SOPs.
• Prepare test reports/Certificate of Analysis.
• Carry out safety and housekeeping activities in the department.
• Any other duties as and when required to be done by Quality Manager.

Requirements

• Possess at least ITE/Diploma in Chemical Process Technology, Chemistry Chemical Engineering, Science & Technology, Polymer Science or equivalent.
• Fresh graduates are welcomed. Preferably 1 to 2 years of relevant experience in lab testing/chemical/ petrochemical industry.
• On-the-job training will be provided.
• Keen to learn and responsible.
• Good interpersonal and communication skills.
• Team player.
• Meticulous with an eye for accuracy.
• Proficient in MS Office.

The Assistant Chemist/Lab Technician reports to the Lab Manager and is responsible for the below:

Responsibilities

Sample Preparation

• Receive and label all samples brought into the lab for accountability.
• Prepare samples from drying, crushing, splitting and pulverising.
• Mix fluxing reagents and load samples in furnace for the fire assay.
• Mix reagents for acid digestions.
• Perform fire assay techniques such as fluxing, fusing and cupellation of samples in correct numerical order.
• Perform smelting and sample extraction of precious metals as and when required

Recovery of Precious Metals such as Gold and Silver via Fire Assay techniques

• Assist with the recovery of precious metals such as Gold and Silver using Fire Assay techniques.

Measurement & Calibration

• Monitor analytical processes and take remedial action where deviations / discrepancies arise impacting on the quality of analytical results.
• Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab Manager

Perform Laboratory Data Analysis and Reporting

• Testing of precious metals scraps through cupellation method (fire assaying).
• Evaluate, validate, ensure and report technical accuracy of reporting analytical results
• Monitor analytical processes and take remedial actions where deviations / discrepancies arise impacting the quality of analytical results.
• Re-analyse analysis samples when control results are not within the acceptable range.

Quality Control

• Inspect samples, fusions, lead buttons and prills to ensure the assaying method is correct.
• Maintain records and accountability of materials (samples and standards) and equipment used.

Equipment Maintenance and Troubleshooting

• Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab manager.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• Assist in the general / preventive maintenance of equipment and housekeeping of the laboratory.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Laboratory Housekeeping

• Ensure and maintain work areas and equipment are clean, tidy and organised.

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Promote and implement workplace safety initiatives.
• Ensure and maintain proper sample disposal of waste such as cupels and fire assay lead.
• Wastes or water generated as a part of daily work performed in a safe manner and in compliance with the disposal regulations and requirements.
• React appropriately and immediately to emergency situations and assists other employees in maintaining readiness to respond to emergencies within the workplace.

Job Requirement

Educational & Professional Qualifications

• Minimum Diploma qualification in Chemistry or its related field.
• Knowledge in safe handling of industrial chemicals.
• Possess effective verbal and written communication skills.
• Fearless of hot environment.
• Able to lift 10kg bars of precious metals.

Relevant Experience

• Problem solving skills.
• Have experience in selecting and setting up of equipment and processes to recover precious metals including gold, silver, platinum, palladium, rhodium is an advantage.
• Possess experience and the ability to operate ICP / XRF is an advantage.
• Must be willing to work overtime whenever necessary.

Machine Shop Manager

This is a critical role which requires a strong technical background in managing a highly proficient machine shop team including the tool crib operations. This position has the overall responsibility for machine shop output in terms of safety, quality and on time deliveries. This position is also responsible for managing the supervisor and programing teams including design of tooling, fixtures, and machining sequence for complex features. The role also supports the sales teams by providing the estimation of machining hours and best optimized solution.

Primary responsibilities:

• Manpower management to ensure safety and high efficiency in the machine shop.
• Ensure quality, OTD and productivity targets are met.
• Responsible to manage all resources such as manpower, tooling, fixtures, gages, programs etc. for efficient operation of machine shop.
• Evaluation of complex machine drawings for manufacturing.
• Propose and implement tooling & fixtures for machining of complex features. Manage cost savings on toolings and fixtures.
• Support sales team on accurate estimation of machining hours.
• Evaluate the reasons for variances between planned and actual and implement actions to mitigate the variances.
• Lead daily MRB (Material Review Board) meeting to provide technical input for jobs when nonconformance occurs.
• Involve in troubleshooting on quality issues which includes working with subcontractors.
• Manage machinists and programming team from multinational countries.
• Support new product manufacturing method and FA process.
• Initiate and lead continuous improvement projects.

Requirements and Qualifications

• Minimum Degree or Diploma in Mechanical Engineering or related field with at least 5+ years of relevant experience.
• Candidate must have a strong background in managing a CNC machine shop.
• Exposure to machining of complex parts for oil & gas equipment is preferred.
• Good mechanical / technical skills
• Good understanding of ANSI, ASME Standards and API Products requirements.
• Good knowledge of CNC programming software will be helpful.
• Strong communication and analytical skills, team player, energetic and willing to work hard.
• The candidate needs to be self motivated with positive attitude and seek career growth.
• Ability to prioritize and multi-task in a fast-paced environment

Other Duties:

While this job description is intended to be an accurate reflection of the requirements of the position, management reserves the right to add or remove duties when circumstances dictate.

Responsibilities

• Carry out analysis and application studies in the area of polyurethanes using laboratory equipment such as potentiometric titrations, gas chromatography, FTIR, Karl-Fischer, AAS, and universal testing machine.
• Carry out technological evaluation of finished products using technological equipment and able to reproduce the customers' application processes.
• Calibration and maintenance of laboratory instruments.
• Ensure proper documentations of results, equipment and consumables.
• Ensure proper sample management according to SOPs.
• Carry out safety and housekeeping activities in the department.
• Any other duties as and when required to be done by superior.

Requirements

• Possess at least ITE/Diploma in Chemical Process Technology, Chemistry Chemical Engineering, Science & Technology or equivalent.
• Preferably 1 to 2 years of relevant experience in chemical/ petrochemical industry.
• On-the-job training will be provided.
• Good laboratory knowledge and methodologies.
• Good interpersonal and communication skills.
• Team player.
• Meticulous with an eye for accuracy.
• Proficient in MS Office.
• Ability to prioritize tasks based on urgency.
• Able to work under fast-paced environment.
• Candidate must be willing to work in Jurong Island

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development servicesProviding customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and productsThrough intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutionsComprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com

RESPONSIBILITIES

• Run chamber tests, including periodic removal of items for verification and re-entry to the chamber for continued testing.
• Changeover jigs and fixtures to accommodate testing of different assemblies.
• Compile and document test results accurately.
• Oversee maintenance of chambers, jigs, and fixtures.
• Support ad-hoc tests and experiments as needed.
• Assist with overall lab management.

• Diploma in Electrical/Mechanical Engineering or relevant studies.
• Minimum 1 year of working experience in Mechanical or Manufacturing Production related field.
• Troubleshooting skill knowledge will be an advantage.

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development servicesProviding customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and productsThrough intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutionsComprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com

RESPONSIBILITIES

• Run chamber tests, including periodic removal of items for verification and re-entry to the chamber for continued testing.
• Changeover jigs and fixtures to accommodate testing of different assemblies.
• Compile and document test results accurately.
• Oversee maintenance of chambers, jigs, and fixtures.
• Support ad-hoc tests and experiments as needed.
• Assist with overall lab management.

• Diploma in Electrical/Mechanical Engineering or relevant studies.
• Minimum 1 year of working experience in Mechanical or Manufacturing Production related field.
• Troubleshooting skill knowledge will be an advantage.

Your Job

We are seeking for a Reliability Lab Technician to support testing efforts from Molex Singapore and other entities in a laboratory environment.

Our Team

You will be working closely under the supervision of the Specialist, Lab. The team collaborates to ensure high-quality testing support and maintains a safety-conscious work environment.

What You Will Do

• Conduct Reliability tests on the products or evaluation.
• Ensure that all tests are conducted as per test requirements and accurately, include Robustness Tests in all new projects submitted for tests.
• Maintain the standard as well as meeting the requirements of ISO17025.
• Generate test reports and to ensure databases are updated and reports are filed properly.
• Keep all tested samples in good order per sample retention policy.
• Conduct monthly Product Audit tests.
• Ensure that the test fixtures are kept and managed properly.
• To ensure good general housekeeping of the reliability lab.
• Performs other related duties as assigned by management.

Who You Are (Basic Qualifications)

• ITE or equivalent in Electrical or Mechanical field.
• At least 2 years of work experience in a test laboratory environment.
• Safety conscious and attentive to detail.

What Will Put You Ahead

• Experience in QA Lab and Reliability Lab environments.
• Skills in cross-sectioning.
• Ability to operate temperature and humidity chambers.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

• Lifescience industry - FMCG
• 9 months contract - Renewable/Convertible
• Office hour

Location: Jurong East

Job description:

• Handle and Coordinate with external vendors to support various services (verification, calibration, preventive maintenance (PM), qualification, repairs).
• Identify and recommend customers appropriate inventory type and quantity of inventory supply of critical equipment service parts, verification/calibration/PM kits and service tools.
• Ensure accurate documentation creation, management, updates and tracking of services rendered in this program, using in-house Asst Management system.

Job requirement:

• Diploma in Science/Engineering related

Interested candidate may apply via email to spkp(at)scientecpersonnel.com (Indicating Job ID J47039 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidate will be contacted.

Poh Tze Qi (Kayley) | R2197837

ScienTec Consulting Pte Ltd | 11C5781

The Chemist/Lab Technician reports to the Lab Manager and is responsible for the below:

Responsibilities

Sample Preparation

• Receive and label all samples brought into the lab for accountability.
• Prepare samples from drying, crushing, splitting and pulverising.
• Mix fluxing reagents and load samples in furnace for the fire assay.
• Mix reagents for acid digestions.
• Perform fire assay techniques such as fluxing, fusing and cupellation of samples in correct numerical order.
• Perform smelting and sample extraction of precious metals as and when required

Recovery of Precious Metals such as Gold and Silver via Fire Assay techniques

• Assist with the recovery of precious metals such as Gold and Silver using Fire Assay techniques.

Measurement & Calibration

• Monitor analytical processes and take remedial action where deviations / discrepancies arise impacting on the quality of analytical results.
• Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab Manager

Perform Laboratory Data Analysis and Reporting

• Testing of precious metals scraps through cupellation method (fire assaying).
• Evaluate, validate, ensure and report technical accuracy of reporting analytical results
• Monitor analytical processes and take remedial actions where deviations / discrepancies arise impacting the quality of analytical results.
• Re-analyse analysis samples when control results are not within the acceptable range.

Quality Control

• Inspect samples, fusions, lead buttons and prills to ensure the assaying method is correct.
• Maintain records and accountability of materials (samples and standards) and equipment used.

Equipment Maintenance and Troubleshooting

• Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab manager.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• Assist in the general / preventive maintenance of equipment and housekeeping of the laboratory.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Laboratory Housekeeping

• Ensure and maintain work areas and equipment are clean, tidy and organised.

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Promote and implement workplace safety initiatives.
• Ensure and maintain proper sample disposal of waste such as cupels and fire assay lead.
• Wastes or water generated as a part of daily work performed in a safe manner and in compliance with the disposal regulations and requirements.
• React appropriately and immediately to emergency situations and assists other employees in maintaining readiness to respond to emergencies within the workplace.

Job Requirement

Educational & Professional Qualifications

• Minimum Diploma qualification in Chemistry or its related field.
• Knowledge in safe handling of industrial chemicals.
• Possess effective verbal and written communication skills.
• Fearless of hot environment.
• Able to lift 10kg bars of precious metals.

Relevant Experience

• Problem solving skills.
• Have experience in selecting and setting up of equipment and processes to recover precious metals including gold, silver, platinum, palladium, rhodium is an advantage.
• Possess experience and the ability to operate ICP / XRF is an advantage.
• Must be willing to work overtime whenever necessary.

Job Info:

• Salary: Basic from $1700 - $2500 + AWS + VB
• Working Hour: Monday - Friday (7:50 am - 4:55 pm)
• Location: Joo Koon (Company transport at designated pickup point island wide)

Job Scope:

• Conduct routine chemical testing and analysis in the wet lab
• Prepare standard solutions, reagents, or conduct back titrations
• Maintain daily and monthly checklists
• Perform daily machine maintenance to ensure machines are in good operating condition
• Update and monitor chemical inventory and lab consumables
• Maintain and adhere to good laboratory 5S3T standards
• Handle precious metallic stock in and acknowledge receipts
• Support production with ad-hoc testing needs
• Conduct failure analysis using SEM, FTIR, GD, etc., in the dry lab

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Responsibilities

• To perform routine chemical testing and analysis in wet lab.
• To prepare standard solution, reagent or back titration.
• Update daily and monthly checklist.
• Daily machine maintenance, ensure machine in good condition before operating.
• Update and monitor lab chemical inventory and consumables.
• To perform and keep good lab 5S3T
• Precious metallic stock in and acknowledge.
• Support production ad-hoc testing.
• To perform failure analysis by using SEM, FTIR, GD etc in dry lab.

Requirements

• O Level and above
• Basic chemical knowledge.
• Minimum 1 year of experience in analysis

Shift Type / Work Hours

• Normal Shift (5 days work week)
• 7.50am to 4.55pm

Benefits

1. Company transport provided at designated pick-up points island-wide.
2. Medical insurance coverage.
3. In-house canteen at subsidized prices.

Please visit our corporate website for more information on Seiko Epson Corporation

1. Person-in-charge of an in-house trailer repair/ maintenance workshop
2. Guide supervisor and staff on the allocation of work and deployment of staff
3. Verify repair quotations from vendors on prime movers and company’s vehicles
4. Conduct inspections on vendors sites to ensure repairs works are completed timely and meet our satisfaction expectations
5. Ensure staff is equipped with relevant skills, knowledge and certifications to perform necessary work.
6. Ensure timely completion of work as per target set by management.
7. Work closely with Transport department to ensure trailers and prime movers are in time for LTA inspection
8. Work closely with Procurement department to control inventory availability and cost.
9. Prepare statistics and reports to review performance and make recommendations on operational and procedural enhancement / improvement
10. Attend to drivers’ feedback / call and recommend next course of action
11. Ensure supply of safety kits/ PPE to staff and ensure adherence to safety regulations and safe work practices
12. Ensure availability of tools, material, spare parts and proper upkeep of inventory and assets
13. Ensure cleanliness of work premises and ensure good housekeeping for a cleaner workplace.
14. Ensure quality through supervision of work and stage inspections
15. Verification of timely and proper opening and closing of job cards
16. Adhere to statutory/ company’s safety and health policies, procedures and regulations
17. Assist HOD and Management in any work assigned
18. Any other duties and responsibilities assigned from time to time

Requirements:

1. Diploma holder in mechanical engineering or related field
2. Possess Class 3 driving licence.
3. At least 5 years of technical experience in automotive industry, preferably in heavy/ commercial vehicles
4. Strong technical competence and experience in prime mover and trailer
5. Good interpersonal skills and goal oriented
6. Able to handle stress and work within a tight schedule

Others Information:

1. Mon – Fri (8.30am – 5.30pm); Sat (8.30am – 12.30pm)
2. Daily meal subsidy
3. Medical, dental & insurance benefits
4. Company Transport: 2 ways from Jurong East

Responsibilities:

• Oversee Microsoft Dynamics 365 management (Business Central/Sales/Human Resource).
• Consult on the implementation and operation of business applications across all Asian countries.
• Establish and lead the operational framework for applications in the Asia region.
• Recommend and utilize information technology to maximize business advantages.

Requirements:

• Minimum Diploma in Computer Science or equivalent.
• Minimum 5 years of working experience.
• Proficient in Microsoft Dynamics Business Central and Dynamics for Sales
• Experienced in API connections with diverse products
• Familiar with Microsoft Power Platform
• MCSD certification (or equivalent) relevant to Dynamics 365 BC, CRM, or Power Platform required
• General understanding of corporate applications like HRM, CRM, ERP
• Ability to design/manage business applications with a regional optimization perspective
• Experience with JSON or any other programming language is beneficial.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Oversee Microsoft Dynamics 365 management (Business Central/Sales/Human Resource).
• Consult on the implementation and operation of business applications across all Asian countries.
• Establish and lead the operational framework for applications in the Asia region.
• Recommend and utilize information technology to maximize business advantages.

Requirements:

• Minimum Diploma in Computer Science or equivalent.
• Minimum 5 years of working experience.
• Proficient in Microsoft Dynamics Business Central and Dynamics for Sales
• Experienced in API connections with diverse products
• Familiar with Microsoft Power Platform
• MCSD certification (or equivalent) relevant to Dynamics 365 BC, CRM, or Power Platform required
• General understanding of corporate applications like HRM, CRM, ERP
• Ability to design/manage business applications with a regional optimization perspective
• Experience with JSON or any other programming language is beneficial.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Oversee Microsoft Dynamics 365 management (Business Central/Sales/Human Resource).
• Consult on the implementation and operation of business applications across all Asian countries.
• Establish and lead the operational framework for applications in the Asia region.
• Recommend and utilize information technology to maximize business advantages.

Requirements:

• Minimum Diploma in Computer Science or equivalent.
• Minimum 5 years of working experience.
• Proficient in Microsoft Dynamics Business Central and Dynamics for Sales
• Experienced in API connections with diverse products
• Familiar with Microsoft Power Platform
• MCSD certification (or equivalent) relevant to Dynamics 365 BC, CRM, or Power Platform required
• General understanding of corporate applications like HRM, CRM, ERP
• Ability to design/manage business applications with a regional optimization perspective
• Experience with JSON or any other programming language is beneficial.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Oversee Microsoft Dynamics 365 management (Business Central/Sales/Human Resource).
• Consult on the implementation and operation of business applications across all Asian countries.
• Establish and lead the operational framework for applications in the Asia region.
• Recommend and utilize information technology to maximize business advantages.

Requirements:

• Minimum Diploma in Computer Science or equivalent.
• Minimum 5 years of working experience.
• Proficient in Microsoft Dynamics Business Central and Dynamics for Sales
• Experienced in API connections with diverse products
• Familiar with Microsoft Power Platform
• MCSD certification (or equivalent) relevant to Dynamics 365 BC, CRM, or Power Platform required
• General understanding of corporate applications like HRM, CRM, ERP
• Ability to design/manage business applications with a regional optimization perspective
• Experience with JSON or any other programming language is beneficial.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Oversee Microsoft Dynamics 365 management (Business Central/Sales/Human Resource).
• Consult on the implementation and operation of business applications across all Asian countries.
• Establish and lead the operational framework for applications in the Asia region.
• Recommend and utilize information technology to maximize business advantages.

Requirements:

• Minimum Diploma in Computer Science or equivalent.
• Minimum 5 years of working experience.
• Proficient in Microsoft Dynamics Business Central and Dynamics for Sales
• Experienced in API connections with diverse products
• Familiar with Microsoft Power Platform
• MCSD certification (or equivalent) relevant to Dynamics 365 BC, CRM, or Power Platform required
• General understanding of corporate applications like HRM, CRM, ERP
• Ability to design/manage business applications with a regional optimization perspective
• Experience with JSON or any other programming language is beneficial.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Repairs, preventive maintenance and trouble shooting of precast automatic production machines and overhead cranes
• Able to interpret electrical circuit and mechanical drawings including pneumatic and hydraulics system
• Sound knowledge in PLC, inverter drives and direct-on-line controls
• Able to oversee maintenance team

Requirements:

• Diploma/ Degree in Electrical Engineering
• Min 1 year experience in maintenance of mechanical equipment
• 2-3 years experience in production machinery and industrial equipment
• Possess good written & spoken communication in English
• Able to work independently
• Working location : Tuas South

Job Description

· Ensure the client’s order is fulfilled as agreed.

· Accurately communicate and organize TIC services to avoid re-work

· Monitor project item times

· Achieve process KPI’s through effective process and project management

· Accurately report and record data and information using, ComPASS, SAP, Sharepoint and department specific systems.

· Maintain an environment of personal development and training that reflects process goals

· Focus on achieving the department’s Process Goals, the TIC process goals and associated KPIs

· Work independently on task being assigned to (incl. task not directly project related)

· Support sales colleagues with client enquiries

Requirements

· A bi-cultural communicator with a technical focus who is capable of working with international staff.

· Technical language capability in English

· Understanding of industrial and international industrial machinery safety standards and guidelines such as Machinery Directive, NFPA 79, and SEMI S2/S8

· Skilled and experience in the management of projects and resources in an efficient way

· Willing to travel extensively within the country and region.

• Flavor house - MNC
• 1 year contract
• Office hour
• Entry level

Location: Woodlands

Basic salary: Up to $2,800

Working hours: 830am to 530pm

Job scope:

• Prepare sample extraction of multiple types of market products, naturals, chemical ingredients.
• Support seniors in research plans, making experimental observations and making connections to the experimental goals.
• Support the lab management activities to ensure efficient lab operations.
• Handle equipments to prepare samples or measurements as needed.

Job requirement:

• Singaporean only
• Able to commit full contract duration
• Min Diploma in Sciences or equivalent

Interested candidate may apply via email to spkp(at)scientecpersonnel.com (Indicating Job ID J44337 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidate will be contacted.

Poh Tze Qi (Kayley) | R2197837

ScienTec Consulting Pte Ltd | 11C5781

Lab Technician - European MNC

1 year renewable contract with benefits

Salary: $4500 max

5 days work week

8 working hours per day

Location: Gul Circle

Job Scope:

Responsible for day-to-day operations and upkeep of laboratories

Provide technical support to the engineer team

Prepares engineering reports by collecting, analyzing, and summarizing data and trends

Liaise with vendors and client on deliveries of equipment and components

Keeps supplies ready by inventorying stock; placing orders; verifying receipt

Conduct laboratory experiments and measurements

Preparation & testing of materials

Any other Ad-hoc tasks

Machine Shop Manager

This is a critical role which requires a strong technical background in managing a highly proficient machine shop team including the tool crib operations. This position has the overall responsibility for machine shop output in terms of safety, quality and on time deliveries. This position is also responsible for managing the supervisor and programing teams including design of tooling, fixtures, and machining sequence for complex features. The role also supports the sales teams by providing the estimation of machining hours and best optimized solution.

Primary responsibilities:

• Manpower management to ensure safety and high efficiency in the machine shop.
• Ensure quality, OTD and productivity targets are met.
• Responsible to manage all resources such as manpower, tooling, fixtures, gages, programs etc. for efficient operation of machine shop.
• Evaluation of complex machine drawings for manufacturing.
• Propose and implement tooling & fixtures for machining of complex features. Manage cost savings on toolings and fixtures.
• Support sales team on accurate estimation of machining hours.
• Evaluate the reasons for variances between planned and actual and implement actions to mitigate the variances.
• Lead daily MRB (Material Review Board) meeting to provide technical input for jobs when nonconformance occurs.
• Involve in troubleshooting on quality issues which includes working with subcontractors.
• Manage machinists and programming team from multinational countries.
• Support new product manufacturing method and FA process.
• Initiate and lead continuous improvement projects.

Requirements and Qualifications

• Minimum Degree or Diploma in Mechanical Engineering or related field with at least 5+ years of relevant experience.
• Candidate must have a strong background in managing a CNC machine shop.
• Exposure to machining of complex parts for oil & gas equipment is preferred.
• Good mechanical / technical skills
• Good understanding of ANSI, ASME Standards and API Products requirements.
• Good knowledge of CNC programming software will be helpful.
• Strong communication and analytical skills, team player, energetic and willing to work hard.
• The candidate needs to be self motivated with positive attitude and seek career growth.
• Ability to prioritize and multi-task in a fast-paced environment

Other Duties:

While this job description is intended to be an accurate reflection of the requirements of the position, management reserves the right to add or remove duties when circumstances dictate.

Hydroleap is a Singapore-grown water treatment startup backed by governmental and private VCs. Seek to displace chemical pretreatment processes with proprietary, IoT-enabled electrical treatment technology. Hydroleap's deep technical expertise allows us to design modular electrical treatment processes and deliver end-to-end wastewater treatment systems, offering solutions that are automated, robust, cost-effective, and environmentally friendly.

Backed by reputable governmental and private venture capitalists (VCs) such as Wavemaker, Enterprise Singapore (Seeds Capital & SGInnovate), 500 Startups, Sparklabs Cultiv8, Entrepreneur First and a few more.

Your Key Responsibilities

The role of the Lab Technician is consisting of carrying out research programs while observing the objectives defined by the business division. To support R&D activities in wastewater treatment, and environmental control system.

Your Key Responsibilities

• Engaging R&D and product development activities to enable new product introduction and improvements.
• Design product and system prototypes to receive feedback and identify areas of improvement through R&D studies.
• Assisting the operation team to identify and troubleshoot the technical problems associated with the products.
• Involving mainly in R&D department and working closely with the rest of the technical, business, production, and operation teams for designing, manufacturing and implementation of innovative water and wastewater solutions.
• Evaluate alternatives, resolve technical issues and interface with other disciplines.
• Ensure technical accuracy, standard engineering practices and inclusion of appropriate documentation on various report and design project.
• Collection and sampling of water sample at client's site
• Ensure good housekeeping in the laboratory and pilot plant and be responsible for the safety and environment compliance of the new processes.
• Perform other duties as needed.

Education and Experience

• Diploma in Chemistry or Environmental Studies
• Preferable with internship experience in water treatment-based industry.
• Strong communication, skilled in report and technical writing, organization, analytical and interpersonal skills.
• Self-starter with ability work together with team members.
• Have enthusiasm for R&D work and field work

Responsibilities:

• Responsible for daily laboratory activities, including in-process analyses, certifying tanks for product sales and laboratory support for ad-hoc projects.
• Participate in laboratory’s safety programs and maintain compliance to safety regulations and company’s safety standards.
• Develops working knowledge of analytical instruments and build foundation in instrument troubleshooting.
• Writes technical documents to describe accomplished work.
• Develops good communication skills and interface with other operations.
• Develop basic understanding of processes to facilitate daily analytical work.

Requirements:

• General understanding and practical application of laboratory techniques.
• Basic analytical techniques utilized in the Laboratory.
• Basic knowledge of statistical methods used in analyzing data.
• Good communication skills.
• Willing to be hands-on with laboratory instruments.
• Knowledge of:
• Principles of GC /HPLC/ICP
• Principles of statistical analyses
• Fresh graduate / Experienced in laboratory analyses
• Minimum Poly / Diploma

The role: In charge of management of facility maintenance and equipment repair works in the hospital and medical centre, as well as be responsible for other duties as instructed by the management

Job Responsibilities:

• Leads the Facilities Management team and ensuring both PPM and corrective actions are done effectively according to plan.
• Supervise and coordinate directly with all employees who are engaged in the repair and maintenance, replacement and additions and alterations of the hospital’s physical plant.
• Ensures compliance with statutory regulations, facilitate renewal of licenses, and also abide by hospital’s policy and SOPs
• Compliant with all regulations pertaining to facilities management and obtain all required licenses and certifications

Qualifications and Certifications:

• Degree in any engineering discipline from recognized University
• Minimum 4 years of relevant experience in facilities management
• Fire Safety Manager