Total 508 technician job vacancies in Maintenance / Repair category in d04 harbourfronttelok blangah sentosa island

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

Responsibilities:

· Repair and servicing of tools / equipment

· Delivery and collection of company products

· Field service work / Inspection

Requirements:

· Preferable with a driving license

· Candidate must possess at least “N" Level or ITE

· Preferred bilingual in English

- Preferred with mechanical background

· Relevant training will be provided

Job Description:

To perform preventive and corrective maintenance works on equipment to ensure equipment can function/operate properly and operate safely.

Requirements:

1. Carry out preventive maintenance works in accordance to the schedule.

2. Carry out corrective maintenance works as when required.

3. Observe safety work procedures.

4. Ensure that tools provided are properly kept and used.

5. Observe proper behavior while working.

6. Perform standby works when required.

7. Follow-up on breakdown report and assist Standby Section where required.

8. Report to the superior on all matters relating to the section.

9. Carry out any other duties as assigned by superior.

10. To keep proper records of works carried out in the relevant reports.

11. Attend to the building or equipment inspection as required, by law (BCA, FSB).

12. Assist in conducting and investigation of damages/ accidents to equipment or personnel.

13. Follow-up on QA defects.

14. Ensure compliance to Environmental Policy, reduction of waste and prevention of pollution.

15. Perform maintenance work under supervision.

• Engage in the installation, repair and maintenance of various technology-based equipment.
• Conduct regular checks and troubleshooting to ensure the technical equipment operates at its optimal performance.
• Provide on-site assistance with hardware and software use and address and resolve technical issues faced by clients or customers.
• Carry out diagnostic tests and analyses to identify the roots of technical issues.
• Liaise with team members and communicate with stakeholders in layman's terms to assess needs and system requirements.
• Record and document instances of hardware failure, repair, installation and removal.
• Stay up to date with technical developments and advancements in allied fields.

Requirements

• working hours : 7:30am - 5:15pm (5.5 days)
• Nitec in Mechanical/Mechatronics

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

Responsibilities

• Perform circuit troubleshooting and general failure analysis
• Perform installation, maintenance, repair, and replacement of all electrical jobs
• To execute work plan and ensure job compliance to quality standards
• Ensure compliance with safety regulations
• Able to understand job requirements and execute tasks given by team leader
• Attend to ad hoc job required for train, bus, and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience
• Able to perform assigned tasks physically, independently, or through team activities.
• Self-motivated, highly resourceful, and organized
• Self-disciplined to carry out tasks responsibly
• Work cooperatively in a team with other technicians to complete assigned tasks
• Have a positive and pleasant attitude.

Responsibilities

• Perform circuit troubleshooting and general failure analysis.
• Perform installation, maintenance, repair, and replacement of all electrical jobs.
• To execute work plan and ensure job compliance to quality standards.
• Ensure compliance with safety regulations.
• Able to understand job requirements and execute tasks given by team leader.
• Attend to ad hoc job required for train, bus, and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently, or through team activities.
• Self-motivated, highly resourceful, and organized.
• Self-disciplined to carry out tasks responsibly.
• Work cooperatively in a team with other technicians to complete assigned tasks.
• Have a positive and pleasant attitude.

Responsibilities

• Perform circuit troubleshooting and general failure analysis.
• Perform installation, maintenance, repair and replacement of all electrical jobs.
• To execute work plan and ensure job compliance to quality standards.
• Ensure compliance with safety regulations.
• Able to understand job requirement and execute task given by team leader.
• Attend to ad hoc job required for train, bus and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

• Attractive Benefits Package
• 5 days work week
• Medical and dental benefit

THE PERSON:

– ITE Trade Certification

– 3-5 years in related field

– Electrical system and mechanical knowledge

– Technical and customer service

THE JOB:

– To provide service, diagnosing problems and troubleshooting equipment

– Replacing faulty equipment

– Be a team-player

– Training will be provided

Job Description:

• To record daily output data and submit to leader.
• Setting up machines during changeover of part.
• Trouble shoot production related quality issues.
• To attend daily morning briefing conduct by leader and provide status update.
• To communicate on the status on each machine before shift hand over.
• Ensure own responsible machines to be warm up before start of shift.
• To report any scrap or technical issue to leader faced during processing.
• To ensure respective in-charge machines are fully utilize.
• Inform leader if machine is faulty/down to avoid delay in delivery.

Prerequisites:

• Minimum ‘O’ Levels, Higher Nitec/Diploma in Engineering (Mechanical/Electrical/Electronics), or its equivalent.
• Minimum 2-3 years of working experience in production environment preferred.
• Experience in setup and operating single point diamond turning machine.
• Preferably some years of work experience in related or relevant work experience in optics manufacturing.
• Must be able to understand and communicate in English.
• Able to carry heavy items (segments or tooling).
• Willing to perform rotating shifts.

Purpose of the Position

• Support for the Operational readiness of the new plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc.)
• To manage Linde Gas Singapore operations to ensure it is maintained safe, reliable, and efficient.
• The operations are to achieve key performance indicators (KPI’s) and annual plan objectives.

Responsiblities

• Accountable for compliance with safety, health, environmental, quality and relevant industry standards.
• Accountable for safe, efficient, and reliable operation of assets
• Accountable for investigating and trouble shooting process issues and outages
• Support process improvement, productivity and reliability projects
• Accountable for the planning, supervision, and execution of operation activities
• Accountable for compliance to all Procedures, Routines, Logs and other Operational Processes
• Accountable for meeting contractual and supply commitments
• Accountable for planning and executing TAR operational activities
• Accountable for controllable site costs
• Accountable for timely and accurate data reporting

Requirements

• ITE in Chemical Process technology /Diploma in Chemical Engineering or related discipline
• Min. 1 to 2 years Operational experience with demonstrable exposure to process plant operations and site-based activity or equivalent.

• To perform general maintenance duties in building & machineries & equipments.
• To perform preventive maintenance on machines & equipments bt cleaning, lubricating, greasing etc for optimization.
• To perform minior electrical work not requiring licence such as office lighting, appliances etc.
• To apply paint or varnish all types of surfaces for protection
• Perform related duties as required such as external support or repair
• To assist in recording facility utilities.
• To carry routine inspections on all operating machineries & equipments
• To ensure all ad-hoc work are carried out

Minimum ITE with relevant fields

Able to work as a team

Efficient and adhere to KPI's given

Conform to WSH guidelines

Work at height certificate a plus

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Basic Information

• 5 Days : 8am - 5.15pm
• Basic up to $3.3k
• Working location at Joo Koon

Job Responsibilities:

• Inspect, maintain, and repair material handling equipment (e.g., cranes, hoists) at customer sites.
• Conduct post-service reviews with customers.
• Utilize company digital tools for work and customer interactions.
• Identify sales leads and opportunities for improvement.
• Complete accurate, professional service reports promptly.
• Maintain company equipment, vehicles, and assets in safe, operational condition.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified**

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

The job scope includes:

• Support laboratory operations by maintaining cleanliness, organization, and functionality of laboratory equipment and workspaces.
• Assist in conducting experiments, tests, and analyses under the supervision of laboratory staff.
• Procure laboratory supplies, equipment, and materials in accordance with project requirements and budgetary guidelines.
• Coordinate with vendors and suppliers to obtain competitive pricing and ensure timely delivery of procurement orders.
• Maintain accurate records of inventory levels, procurement transactions, and supplier information using designated software or systems.
• Assist in the development and implementation of procurement strategies to optimize cost-effectiveness and efficiency.
• Collaborate with laboratory personnel and project teams to identify procurement needs and recommend suitable products or solutions.
• Monitor and track the usage of laboratory consumables to prevent stockouts and minimize wastage.
• Adhere to safety protocols and guidelines while handling hazardous materials and operating laboratory equipment.
• Assist in other laboratory-related tasks and projects as assigned by supervisors or management

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Candidate must possess at least a Secondary School/Professional Certificate/NITEC, Diploma, Advanced/Higher/Graduate Diploma/Degree, any field.
• At least 1 year(s) of working experience in the related field is required for this position.
• Preferably Junior Executives or fresh graduate.
• Good communication skills and able to communicate with suppliers and internal department well.
• Excellent negotiation skills for best material/equipment/service pricing and payment terms from suppliers.
• Be driven, responsible, organized, independent and able to handle stress well.
• Able to learn fast, high attention to detail, and able to multi-task
• Basic Skills required: Proficient in Microsoft Office applications and multilingual skills (English & Mandarin)
• Possess positive working attitude, punctual, initiative and able to work productively under minimal supervision.
• Able to work under pressure and minimum supervision.
• Able to start immediately or at short notice is a plus.
• Able to work from 1:00pm - 10:00pm

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project.

We regret that only shortlisted candidates will be notified.

Job Description & Requirements

Key Responsibilities :

o Perform routine and preventative maintenance tasks on industrial packaging machines and equipment;

o Carry out repairs, troubleshooting, and maintenance work on mechanical and electrical systems;

o Keep records of maintenance and repair work, including ensure spare parts inventory equipped at all times;

o Maintain a clean and organized work area, adhering to safety and efficiency standards;

o Ensure maintaining spare parts inventory levels and ensuring proper care and protection of maintenance tools and equipment;

o Assist Maintenance Chief to identify and implement continuous improvement initiatives;

o Obtain quotes from suppliers and internet purchases for comparison to achieve the most cost effective solutions while maintaining quality standards;

o Provide weekly updates on the status of ongoing maintenance tasks, servicing issues, and outstanding parts orders.

Requirements :

o Minimum 5 years of experience in maintenance, repair, and troubleshooting of industrial machinery, preferably in a beverage manufacturing environment;

o Diploma, NITEC, NTC-2, or ITC in Mechanical, Mechatronic, or Electrical Engineering;

o Competent in Microsoft Office preferred - outlook, excel, word, and CAD;

o Knowledge of industrial machinery, including packaging equipment, conveyor system, boiler, chiller, compressor and cooling tower etc;

o Familiarity with Electrical motors (AC/DC), Pneumatic and hydraulic systems, Valves and actuators, Pumps, Gearboxes and transmission systems, Sensor technologies (e.g., temperature, pressure, level, flow), Boiler and chiller systems, Water treatment systems, Packaging machinery and Material handling equipment.

JOB RESPONSIBILITIES

· Follow standard operating procedures (SOPs) to accurately prepare, dispense pharmaceutical raw materials and ingredients in the correct quantities.

· Record and document manufacturing data, including dispensing data, logbook, cleaning record and other relevant information.

· Perform daily cleaning of the dispensing room, including surfaces, equipment, and storage areas, following established cleaning procedures SOP and protocols. Ensure that all workspaces are kept clean and organized to maintain a ISO clean room class 8 environment for pharmaceutical processes.

· Monitor and maintain dispensing device performance to ensure proper functioning and calibration.

· Adhere to safety protocols and procedures to protect yourself and others in the dispensing environment.

· Work collaboratively with other team members to ensure smooth and efficient operations.

· Report any issues, deviations, or incidents to supervisors or relevant personnel for prompt resolution.

· Participate in training programs and Adhere to Good Manufacturing Practices (GMP) guidelines and regulations related to cleaning and dispensing in pharmaceutical manufacturing.

·To carry out any other duties assigned by your immediate superior.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Why Patients Need You

Our breakthroughs would not make it to the hands of patients without our pharmaceutical manufacturing team. We rely on a team of dedicated and agile members, who understand the importance and impact of their role in Pfizer’s mission. Patients need colleagues like you who take pride in their work and always look to improve outcomes. You will help to ensure that patients and physicians have the medicines they need, when they need them.

What You Will Achieve

You will be operating automatic and manual chemical process equipment of varying complexity in various production processes in accordance with operating procedures. You will perform quality control analyses as required to complete in-process batches and identify variations. You will be trained in hazardous material handling and emergency procedures as these processes may generate high pressure and/or critical reactions.

As part of technical operations, you will be a team member who is relied to have a good understanding of procedures, techniques, tools, materials and equipment. Your decision making will help you prioritize workflows based on the available resources. You will follow standard procedures to complete tasks, some of which may vary in scope, sequence, complexity and timing. You will contribute to the team’s success by sharing your previously acquired knowledge.

It is your hard work and focus that will help in making Pfizer ready to achieve new milestones and help patients across the globe.

How You Will Achieve It

• Manage own time and professional development, be accountable for own results and prioritize own workflow.
• Operate automatic and manual chemical process equipment of varying complexity in various production processes in accordance with operating procedures.
• Perform duties required in operating a variety of equipment used in your assigned area of the division, maintaining responsibility for tasks as assigned.
• Operate process equipment, such as filter presses, pumps and agitators.
• Participate in quality and safety incident investigation.
• Troubleshoot all operating deviations and issues and coordinate with other function when required.
• Complete all documentation according with Good Manufacturing Practices {also cGMP} and Good Distribution Practices {part of GxP} standards.
• Responsible for preparation and clearing of equipment for maintenance work.
• Perform material receiving, staging, transfer, dispensing, sampling, and charging operation.
• Monitor the plant status and liaise with colleagues of other departments to ensure there is no interruption to manufacturing process.
• Maintain Pfizer standards and values for quality, safety and environmental objectives as well as meeting production goals.
• Complete all trainings by attending scheduled training.

Qualifications

Must-Have

• High School Diploma or GED
• 2+ years of experience
• Knowledge of industry practices and standards
• Ability to work in a team environment and have good interpersonal skills is essential.
• Effective written and oral communication
• Computer Skills, such as Microsoft Applications and experience with System Application & Products

Nice-to-Have

• Bachelor's Degree
• Experience in a chemical or formulation manufacturing environment

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Are you interested in joining a team that is revolutionising the resource exploration and navigation industry? At Atomionics, we are building quantum sensors using Atom Interferometry - harnessing the potential of the wave-nature of atoms - for resource exploration.

Atomionics is an early-stage, fast growing startup based in Singapore, backed by fantastic investors from the private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other prominent angels.

The Opportunity

This is an exciting role that involves travel, working in dynamic, real-world environments, and hands-on engagement with pioneering quantum technology. As a Field Technician, you’ll play a critical role in supporting the deployment of our unique Quantum Gravimeter at survey sites, such as in the Northern Territory, Australia, and Arizona, USA.

Responsibilities

• Troubleshoot On-Site Issues: Identify and address technical issues on-site promptly, performing necessary repairs or adjustments to maintain sensor accuracy.
• Conduct Routine Inspections and Testing: Regularly assess the performance of equipment, conduct diagnostics, and verify sensor calibration for data integrity.
• Deploy and Maintain Equipment: Set up and ensure proper functioning of quantum sensors and gravimeters in various field locations, including rugged or remote environments.
• Document Procedures and Findings: Maintain accurate records of maintenance activities, troubleshooting steps, and solutions for future reference and compliance.
• Collaborate with Internal Teams: Provide feedback to engineering and operations teams about equipment performance and potential improvements, contributing to product refinement.

About you

• You have 1-2 years experience in a technician role, ideally in a technology-intensive environment, with exposure to sensor or electronics maintenance.
• You have an ITE or a Diploma in electronics, mechanical engineering, or a related field.
• You are proficient in diagnosing and repairing mechanical and electronic systems.
• You are able to work outdoors in varying conditions, and travel frequently to remote locations (Australia, USA, etc.).
• A valid driver’s license and a clean driving record, as regular travel is required.

What we can offer you

• A chance to learn about the intricacies of deep tech research, product development, and strategy in a high-growth startup
• On-the-job training and real responsibility within the business
• Impactful work at the cutting edge of quantum technology
• Board games and curry night

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Provide routine, preventive and corrective maintenance, troubleshooting and overhaul on process equipment such as piping, pressure vessel, pump, compressor, etc.

• Diploma or NITEC in a relevant Engineering discipline
• At least 3 years' relevant experience in an oil refinery/petrochemical plant
• Candidates without relevant experience may be considered for entry-level positions.