Total 1,482 Maintenance / Repair job vacancies in SGP - Singapore - Singapore (70 Tuas West Dr)

Responsibilities

-Liaise with immediete Supervisor & SHE Supervisor in any high risks work to be carried out.

-Maintain good Housekeping at end of work completion.

-Perform electrical equipment installation and maintenance work as per client's electrical drawings and specification.

-Perform site inspection and testing of electrical equipment and installation.

-Perform troubleshooting and repair/rectify electrical equipment.

-Assist Electrical Supervisor to complete punch list and pre-commissoning work for electrical equipment and installatons.

-Comply with the site safety regulations and work permit procedures when carrying out the electrical works.

Requirements

-NTC-2 level or more in electrical/electronics engineering or secondary education or trade certificate, LEW certificate will be added advantage

-At least 3 years experience in process plant equipment

-Have the knowledge about material, such as conduits, fitting, cable, wires and others

-Familiar with electrical equipment, such as voltmeter, ammeter, IR-tester, ELCB tester, etc.

-Good practical knowledge of electrical safety practices

-Good knowledge of electrical schematic and control wiring diagrams.

-Understanding of fundamentals of hazardous area classification and ex-proof equipment

-Can do electrical work independently and also work as a team

Responsibilties

- Liaise with immediete Supervisor in any high risks work to be carried out.

- Maintain good Housekeeping at end of work completion.

- Carry out instrument preventive maintenance and servicing & instrument emergency on call servicing and troubleshooting.

- Conduct instrument on-line calibration and checking.

- Control valve overhaul, servicing and calibration.

- Conduct / implement work permit system on site.

- Conduct function check of instrument loop (analog and digital signal)

- Troubleshoot and solve problems of instruments and advise on the proper repair.

- Understand flow and loop diagrams, installation diagram and specifications for installation of all type of field instruments.

- Run conduits, pull wiring, terminal wiring and functional check.

- Perform plant pre-commissioning and commissioning.

- Monitor and supervise third party maintenance and servicing activities as required.

- Ensure all documentation and procedures are up to date and adhered to.

- Check and prepare instrument calibration reports.

Requirements

- ITC/D|diploma in Electrical/lnstrumentation

- Minimum 3-4 years of relevant experience in process lndustry

- Working knowledge of P&ID drawing, loop diagram, hookup drawings, logic diagrams and single line diagram

- Knowledge about field instruments, DCS and PLC systems

- Ability to work independently at customer's, sites

- Understanding of local/international Process lndustry Codes and Practice Good written and spoken English language skills

- Good technical competence

• Service, Maintain & trouble shoot of plant’s facilities
• Service, Maintain & trouble shoot of machinery equipment
• Perform periodic preventive maintenance of plant’s facilities & machinery equipment)
• Perform any other reasonable duties as required by Management from time to time (Such as Safety, ERT, etc)
• Willing to work rotating shifts and on public holidays

Job Description :

• Ensure production machines run a optimal state and to meet the machine related KPIs while ensuring compliance with saferty work procedures
• Solving technical issues on various production and facility equipment
• Ensure timely execution of maintenance and achieving minimal machine downtimes
• Carry out works in accordance with the proper safety work procedures
• Proficient in electrical technical knowledge and hands on skills for works in industrial plant environment
• Responsible for reviewing the work processes to determine if any problem exist and seek improvmement wherever possible
• Review and recommend process improvement, standardisation and optimization
• Any ohter dutues/ projects as assigned by the Manufacturing Operation Manager

Job Requirements :

• Diploma in Electrical / Electronic Engineering or higher
• 2 to 5 years' experience in process engineering in manufacturing plant or industrial environment
• Effective oral and writeen communication skills in English and Mandarin
• Team player and commitment to work during non-office hours shall at any time
• Able to perform shift work whenever neceaasry

Job Description & Requirements

1. Carry out daily inspection for facility plant equipment.
2. Carry out periodic maintenance of machines & ensure that all potential environmental impact associated with the machineries are minimized & mitigated.
3. Carry out schedule and preventive maintenance works.
4. Attend to breakdowns and assist in repair works, and escalate calls for vendor support if necessary.
5. Update and maintain records of plant equipment and machinery.
6. Upkeep the spare parts list and ensure purchases requisitions are made.

Competence Requirement

· Preferred to have NTC/ Diploma in Mechanical / Mechantronics / Electrical Engineering field.

• Fresh may be considered, but preferred with 1 – 2 years of related experiences in Maintenance of Equipments.

• Maintain accurate records of repairs and parts used
• Order and replace parts, collaborating with suppliers
• Attend to breakdown repair and recovery of operational equipment
• Any others adhoc job assigned by supervisor
• Maintain high standard of housekeeping at workplace
• Practice safe work procedures and safety rules implemented at the workplace
• Not to engage in any unsafe or negligent act that may endanger self or others
• Handling Day today Checklist
• Responsible For maintaining and using the
• Proper attire and personal protective equipment (PPE)
• Inspects the truck as required at the start of each workday
• Maintaining Vechile timesheet,etc

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement from AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Extraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

Job Description

· Operate high-end automated printing machine for quality output and timely delivery

· Run the printing press according to production plan

· Examines printed results for ink density, accuracy of design and registration conforming to required artwork

· Perform first level analysis and optimize the set-up between the printed sheets

· Conduct periodic autonomous preventive maintenance as scheduled

· Manage daily housekeeping

Job Specification

· Candidates with more experience will be consider for leader role

· Min 2 years of relevant experience in the printing industry

· Able to work rotating shift in west area

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Maintenance Engineer – SAP Plant Maintenance SME to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Oversee the implementation of SAP

· Gather all relevant documentation from Site Leaders and EPCM project managers.

· Lead and guide the implementation team to ensure consistent progress and achievement of project timelines.

· Plan and monitor project execution by organizing regular meetings with stakeholders and the project team.

· Identify and address project challenges, gaps, and risks to facilitate smooth execution.

· Responsible for collecting and validating PM Master Data in accordance with SAP and cGMP standards.

· Oversee the complete loading of PM Master Data, including Floc, Equipment, PM Task Lists, and BOM.

· Report on project progress and status in global meetings, escalating any challenges as needed.

· Conduct walkdowns with the EPCM team for electrical and instrumentation disciplines.

· Ensure the EPCM team calibrates plant instruments in compliance with site standards.

· Obtain spare parts quotes and review technical specifications against engineering documents.

· Create and establish BOM for plant assets, including mechanical equipment and instruments.

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

• Provide electrical and technical support to the Operations team with electrical troubleshooting
• Prepare electrical spares in workshops to be in acceptable working conditions
• Perform electrical troubleshooting and PLC troubleshooting to increase productivity and lower maintenance cost with high uptime
• Optimize power system to ensure sustainability
• Create and maintain electrical drawing library documenting machine details and modifications
• Ensure top notch Safety, housekeeping and greenery in area of work
• Support all improvement projects such as machine, productivity and safety improvement projects

Job Requirements:

• Min GCE N Level, NITEC / ITE, or equivalent
• Candidate with no working experience are welcome to apply
• Min 1 year of relevant experience in manufacturing environment
• Able to interpret electrical circuit and diagram
• Able to work independently as well as a team player

Technician Responsibilities:

• Diagnose, troubleshoot and repair mobile devices;

• Quality control and testing of repaired devices to ensure full functionality. Resolve/manage customer inquiries;

• Able to interact positively with customers at the storefront and over the phone;

• Ability to multi-task between repairs and customer service;

• Other related duties as required;

• Maintain and use repair tools and equipment. Including software and in-store POS system to track repair tickets and inventory;

• Strategically plan the order of operations to ensure a successful repair;

• Provide estimates and quotes;

• Glass only replacement on Samsung and iPads;

• Microscopic Board work; component replacement Hand-solder SMT components,

• remove and replace thru-hole comp without board damage,

• solder wires and cables,

• Diagnosis, troubleshoot and repair mobile devices;

• identify assembly and documents issues;

• Repair logic board issues from water damage.

Requirements:

• Excellent knowledge of customer service best practice with previous experience;

• Ability to repair a variety of mobile devices (i.e., iPhone, Samsung, LG, Motorola, Sony, Huawei and OnePlus phone, and iPads.);

• Ability to communicate effectively with a wide variety of people in a professional manner, face to face, on the telephone and in writing;

• Knowledge of mobile devices including manufacturers, operating systems, and network service providers;

• Willing to work flexibly and with enthusiasm;

• Excellent organizational skills;

• Good attention to detail and ability to show initiative;

• Ability to demonstrate practical troubleshooting and problem analysis techniques;

• Ability to plan and prioritize your workload without supervision

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Responsibilities

- Follow up with all unsafe site condition and rectify all deviations accordingly.

- Co-ordinate with SHE Supervisor on all safe work procedure to potential hazards

- Perform visual inspection of installation, Electrical & instrument hook-up / system.

- Carry out the Electrical & lnstrument work as per construction drawings.

- Carry out punch listing and assist in pre-commissioning checks.

- Perform / witness all acceptance tests such as continuity, insulation, simulation three-point checks etc.

- Assist Electrical & instrument engineer to commission all installed instrument loops and Electrical system

- Troubleshoot if required, and repair/rectify all systems for process and control loops.

- Prepare and filing electrical & instrument report after attending loop check as per format designated by client.

- Apply work permits.

- Perform any other duties as directed by the immediate superior or higher management.

Requirements

- ITC/ Diploma levels in Electronic/Electrical/Mechanical Engineering

- Minimum 10-11 years of relevant experience in process lndustry Work

- Sound fundamentals of ISO Standards, electrical safety and area classification

- Skills and knowledge of an instrument technician

- Strong knowledge of electronics, pneumatic and hydraulics

- Familiar with instrument calibration procedures

- Have analyzer knowledge (optional)

- Computer literate (esp. Microsoft office) (optional)

Job Description

• Able to perform hands-on work and lead operators.
• HVAC, Air compressor & Pneumatic system maintenance.
• Machinery (M&E systems) troubleshooting & maintenance, general maintenance.
• Support manager on daily operation (job scheduling, logistics etc.)
• Carry out routine maintenance
• Coordinate with all production sections to schedule and carry out machine repair and maintenance, fabrication and installation projects requested by production sections
• Lead a team of workers to carry our machinery and plant maintenance, including troubleshooting & repair, building repair, maintenance and renovation works.
• Any other tasks and responsibilities assigned as and when necessary.

Job Requirements

• At least 5 years relevant working experience preferably in manufacturing environment.
• Must have good all rounded knowledge and practical experience in general plant maintenance, including electrical wiring, plumbing, air-con installation & servicing, air compressor maintenance, Knowledge & Experience in Industrial Internet of Things (IIOT) etc.
• Possessions of Fire Safety Manager (FSM) Cert will be an advantage

Personality

• Hardworking and committed
• Possess self-discipline and initiative
• Possess sense of urgency
• Must be self-starter and self-motivator.
• Willing to work in a team
• Report writing skills
• Able to communicate well with others

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

Responsibilities:

• Work in a team to maintain the mechanical or electrical installation and equipment.
• Assist in the installation, operation and maintenance of Company's manufacturing plant machinery, building and associated facilities.
• Carries out inspection and servicing of the Company's mechanical and electrical installations, building and associated facilities, air-conditioning units, machinery and equipment.
• Attend to requests / complaints from users and carries out minor repairs.
• Liaise and attend to outside contractors during major repairs or installation works and provides assistance as required.

Requirements:

• ITE/Diploma in Electrical, Mechanical, Building Services, Facilities Management or equivalent.
• Preferably with some relevant experience in building, facilities and M&E services maintenance.
• Able to support duty on weekend/Public Holiday or perform 12 hrs rotating (Day/ Night) shift when required.

Shift Type / Work Hours:

Normal Shift (5 days work week)

7.50am to 4.55pm

This position will be placed under 1 year contract role.

Benefits:

1. Company transport provided at designated pick-up points island-wide.
2. Medical insurance coverage.
3. In-house canteen at subsidized prices.
4. Employee Flexible Benefits scheme.

Please visit our corporate website for more information on Seiko Epson Corporation.

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

Job Highlight

• Basic Salary + High Commission + Variable Performance Bonus (earn up to $4000)
• 5 days/6 days work week
• Medical Benefits, Insurance Coverage
• Staff Purchase Discounts

Responsibilities:

• Attend to customer request and enquiries on Computer Components / Repair Service / PC Customisation
• Recommend the ideal Computer Components to customer according to their individual preference through knowledge sharing
• Maintain good relationship with customers to build customer loyalty
• Basic housekeeping of work area
• Assist in retail operations, e.g. stock take
• May be required to be involved in Trade Fair and related events

Knowledge & Skills:

• Possess good communication & interpersonal skills and is a team player
• Presentable disposition & well-groomed
• Retail sales target achievement
• Customer relationship management – maintain and create new customer profile
• Ensure inventory management for individual counter
• Ensure excellent customer service is given to the customers (e.g. product knowledge)

Job Responsibilities:

• Manage all daily tasks and matters within the Operations Department.
• Collaborate with Technical Department, Operations Administration Department and Sales & Marketing Department in project executions including carrying out site surveys, preparing designs and documentations
  (method statements, safe work procedures, risk assessments, fall prevention plans and lifting plans) for submission, arrange manpower and logistics to deliver construction equipment to site, install, commission,
  maintain, inspect, shift, troubleshoot, dismantle and return construction equipment to workshop.
• Implement systems and liaise closely with customers to monitor site progress as well as workshop planning and productivity.
• Conduct frequent site inspections to ensure work done in accordance with contractual scope of work, customer requirements and manufacturer specifications as well as take prompt corrective actions.
• Ensure supervisors/technicians submit service reports with pictures, work done forms, inspection checklists and maintenance checklists to customers and Operations Administration Department.
• Liaise with PEs and AEs to carry out designs, inspections and testings as well as submit drawings, calculations, COS and LM certificates to customers promptly.
• Conduct user trainings and safety briefings as well as organise safety campaigns.
• Perform incident investigation and root cause analysis as well as prepare incident reports with pictures.
• Manage the training, productivity and well-being of the teams within the Operations Department
• Ensure our construction equipment and accessories on-site and in the workshop are fully accounted for at all times and implement necessary measures to prevent loss and damage.
• Perform asset and inventory reconciliation and generate monthly reports and forecasts for Management.
• Use Enterprise Resource Planning system to complete daily tasks and assist in the implementation and improvements of the system.
• Ensure procedures, products and services rendered comply to Company policies, government regulations and ISO standards.
• Maintain historical records for annual accounting and ISO audits.
• Undertake additional tasks and responsibilities when required or as instructed.

Job Requirements:

• Class 3 driving license
• Team player with strong interpersonal, communication and written skills, leadership qualities and ability to manage multiple projects under tight timelines.
• Must be able to read and understand architectural and structural drawings as well as possess own vehicle.
• Knowledge in electrical/electronic/mechanical concepts and AutoCAD will be an advantage.
• Must be able to speak Chinese in order to communicate with Chinese speaking clients
• Working Days : 5.5 days work week.
• Working Time : Monday to Friday (8am - 5pm) & Saturday (8am - 12pm)

Key Job Responsibilities:

· Work closely with Operations Department in project delivery to fulfil project requirements, preparing project drawings, proposals and technical submissions

· Coordinate with Professional Engineers for design calculations and endorsements

· Liaise with customers to prepare and submit drawings, calculations and submission documents

· Responsible for maintaining design and technical specifications of equipment and materials, project drawings and submissions

· Involved in annual ISO audit

· Undertake additional tasks and responsibilities when required or as instructed

Pre-Requisites:

· NTC or ITC or diploma in architecture or equivalent qualifications

· Experienced in AutoCAD 3D and BIM, and able to understand architectural and structural drawings

· Team player who is independent, organised as well as able to multi-task within tight deadlines with strong work ethics and communication skills

• Conducts routine analyses in compliance with applicable methods, protocols, SOPs, and regulatory agency guidelines

• Carries out testing on all aspects of work and calibration of equipment in the respective section when necessary

• Supports the team by maintaining equipment, logs, and record books; troubleshooting and resolving problems and helping with special projects

• Maintains glassware by picking-up, cleaning, washing, sterilizing, and distributing when necessary

• Monitors and keeps laboratory supplies ready by inventorying stock, placing orders and verifying receipt

• Keeps equipment operating by following operating instructions, troubleshooting breakdowns, maintaining supplies, performing preventive maintenance and calling for repairs

• Documents information by maintaining laboratory daily logs and equipment record books and documentations

• Assists team and completes projects by attending and participating in group meetings

• Updates job knowledge by participating in educational opportunities and reading technical publications

• Enhances laboratory and organization reputation by accepting ownership for accomplishing new and different requests and exploring opportunities to add value to job accomplishments

• Prepares test reports as well as perform other related lab administrative work

• Performs the works related to safety and quality control, as well as prepare the documents accordingly

• Maintains and upkeeps records

• Performs other duties as assigned

Job Description and Responsibilities

· Recruit, train, assign, schedule, coach, counsel, and discipline employees

· Communicate job expectations; planning, monitoring, appraising, and reviewing job contributions

· Contribute operations information and recommendations to strategic plans and reviews; prepare and complete action plans; implement production, productivity, quality, and customer-service standards; resolve problems

· Forecast requirements; prepare an annual budget; schedule expenditures; analyze variances; initiating corrective actions

· Analyze and improve organizational process and workflow, employee and space requirements, and equipment layout; implement changes

· Maintain safe and healthy work environment by establishing, following, and enforcing standards and procedures; complying with legal regulations

· Accomplish operations and organization mission by completing related results as needed

· Manage staff levels, wages, hours, contract labor to revenues

· Manage relationships with clients

· Review and approve all operational invoices and ensure they are submitted for billing or payment

· Serve as primary point of contact when there are clients issues related to equipment quality, customer service, or accidents and mishaps on-site.

· Communicate clients’ issues with operations team and devise ways of improving the customer experience, including resolving problems and complaints

· Work closely with Operations Director and management team to set and/or implement policies, procedures, and systems and to follow through with implementation.

Key Skills and Competencies

• critical thinking and strong problem-solving capability
• planning and organizing
• decision-making
• communication skills
• persuasiveness
• influencing and leading
• delegation
• conflict management
• adaptability
• stress tolerance
• team work

Requirement

• Bachelor’s degree in operations management or related field.
• Experience in management, operations, and leadership.
• Minimum 5 years cleaning experience in commercial building.
• Ability to build consensus and relationships among managers, clients, and workers
• Excellent communication skills.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. There will be opportunities to acquire advanced CAD/CAM skills and equipment operations through involvement in industry and competitively funded projects related to remanufacturing process technologies. The roles and responsibilities include the following areas:

-Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.

-Tracking and managing lab resource utilization, procurement, and delivery.

-Storage space management and optimization.

-Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

-Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

-Assist in scheduling equipment utilization and procurement for project consumables.

-Assist in lab equipment operation, collection of process data and analysis of results.

-Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

-Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Detailed Job requirements:

• Polytechnic/ Technical Diploma in Engineering
• 1-2 years of experience working in a lab is preferred.
• Experience with engineering CAD/CAM software such as NX UniGraphics, SolidWorks, AutoCAD will be advantageous.
• Strong attention to detail.
• Excellent verbal and written communication skills.
• Proficient in MS office.
• Ability to learn and adapt new technologies to stay relevant.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

DUTY AND RESPONSIBILITY:

• Assist the project manager in areas such as contract management, cost control, schedule monitoring and coordination, engineering and design reviews, risk assessments and procurement related issues of projects.

• Coordination with inter-related departments to meet the progress and budget.

• Prepare of material take-off and cost preparation of tenders.

• Co-ordinate with the site construction team for installation, testing and commissioning works.

• Prepare method of statement, for various progress reports, claims and risk assessments for various installation works as well as inspection and test plans.

QUALIFICATION AND EXPERIENCE REQUIRED

• Possess a degree or diploma in electrical or instrumentation

• Minimum 5 years work experience as electrical & instrument project engineer in oil & petrochemical construction industry