Total 1,374 Maintenance / Repair job vacancies in Tuas

The Chemist/Lab Technician reports to the Lab Manager and is responsible for the below:

Responsibilities

Sample Preparation

• Receive and label all samples brought into the lab for accountability.
• Prepare samples from drying, crushing, splitting and pulverising.
• Mix fluxing reagents and load samples in furnace for the fire assay.
• Mix reagents for acid digestions.
• Perform fire assay techniques such as fluxing, fusing and cupellation of samples in correct numerical order.
• Perform smelting and sample extraction of precious metals as and when required

Recovery of Precious Metals such as Gold and Silver via Fire Assay techniques

• Assist with the recovery of precious metals such as Gold and Silver using Fire Assay techniques.

Measurement & Calibration

• Monitor analytical processes and take remedial action where deviations / discrepancies arise impacting on the quality of analytical results.
• Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab Manager

Perform Laboratory Data Analysis and Reporting

• Testing of precious metals scraps through cupellation method (fire assaying).
• Evaluate, validate, ensure and report technical accuracy of reporting analytical results
• Monitor analytical processes and take remedial actions where deviations / discrepancies arise impacting the quality of analytical results.
• Re-analyse analysis samples when control results are not within the acceptable range.

Quality Control

• Inspect samples, fusions, lead buttons and prills to ensure the assaying method is correct.
• Maintain records and accountability of materials (samples and standards) and equipment used.

Equipment Maintenance and Troubleshooting

• Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab manager.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• Assist in the general / preventive maintenance of equipment and housekeeping of the laboratory.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Laboratory Housekeeping

• Ensure and maintain work areas and equipment are clean, tidy and organised.

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Promote and implement workplace safety initiatives.
• Ensure and maintain proper sample disposal of waste such as cupels and fire assay lead.
• Wastes or water generated as a part of daily work performed in a safe manner and in compliance with the disposal regulations and requirements.
• React appropriately and immediately to emergency situations and assists other employees in maintaining readiness to respond to emergencies within the workplace.

Job Requirement

Educational & Professional Qualifications

• Minimum Diploma qualification in Chemistry or its related field.
• Knowledge in safe handling of industrial chemicals.
• Possess effective verbal and written communication skills.
• Fearless of hot environment.
• Able to lift 10kg bars of precious metals.

Relevant Experience

• Problem solving skills.
• Have experience in selecting and setting up of equipment and processes to recover precious metals including gold, silver, platinum, palladium, rhodium is an advantage.
• Possess experience and the ability to operate ICP / XRF is an advantage.
• Must be willing to work overtime whenever necessary.

Requirement:

• Minimum N/ O level
• Minimum 2 years of driving experience with clean driving record
• Well versed in Singapore road and landmark
• Able to speak English
• Non Smoker
• Able to work after office hours when necessary
• Reponsible , trustworthy and flexible
• Posses valid class 3 & 4 driving licence

Job Description

• Perform driving duties, delivery goods to customer island wide
• Fetching boss/guest to various destination using company car as and when required
• Any other ad-hoc activities as assigned by all departments
• Daily reporting of job done

Staff Benefits

• Transport provided at pick up point
• Transport allowance
• Long service award
• Dental & Medical benefit
• Training Provided

The company is a high-tech manufacturer of contact lens solutions, sterile pharmaceutical solutions, first-aid eye and wound irrigations as well as eye comfort drops.

Responsibilities:

• Inspects incoming raw materials for compliance with current standards.
• Conducts periodic test analysis on products undergoing stability studies.
• Inspects incoming packaging materials for compliance with current standards.
• Performs microbiological testing and environmental monitoring according to SOPs.
• Prepares test solutions, compounds, or reagents for laboratory use.
• Assists Chemist, Lab Supervisor, and Micro Supervisor in maintaining company quality manuals related to operating procedures.
• Assists in GMP audits, validation, qualification, and change control.
• Assist in maintaining QC-related files.

Requirements:

• Min Diploma in Chemistry, Chemical Process Technology, Pharm, Biotechnology, Quality Assurance or any other science-related
• Entry level are welcome, training provided
• Open to shift work

How to Apply:

Interested candidates, please submit your updated resume by using Apply Now button

**We regret to inform that only shortlisted candidates will be informed.**

Tan Zhi Ning

Registration Number: R23116771

EA License No: 18C9027

~ Responsible for assembling and testing manufactured goods

~ Perform equipment setup, operation, equipment adjustments and minor preventative maintenance tasks to meet all standards for safety, quality and efficiency

~ Must be problem solver and analytical thinker

~ Ability to check for defects and identity and distinguish between colors

~ Ability to read and carefully follow instructions

~ Capable of working independently to a production schedule

THE ROLE

This individual will assist the QC Manager in managing Quality Checks for all raw materials and finished goods as well as maintaining all Quality documentation.

KEY RESPONSIBILITIES

• The incumbent works closely with the QC Manager on all aspects of Quality Control, in particular, on product reliability and compliance with all established product standards. Ensures that all aspects of quality within the organization are upheld.
• This position reports directly to the QC Manager.
• The incumbent maintains overall purviews for all aspects of quality within the organization and hence, is entrusted with developing checks to ensure that standards are maintained and/or exceeded.
• Inspects all incoming raw material for compliance according to current standards.
• Conducts periodic checks and analyses on all WIPs.
• Retains finished product samples from production to conduct checks and analysis.
• Prepare test solutions, compounds, or reagents for laboratory use.
• Assist QA with failure analyses, and corrective and preventive action response to customer’s complaint.
• Work with various departments on the maintenance of company quality manuals pertaining to operating procedures.
• Assist in GMP audits, validation, qualification, and change control.
• Assist in maintaining Product Quality and Technical File.

REQUIREMENTS

• Diploma in Chemical Process Technology, Pharm, Biotechnology / Degree in Chemistry, Quality Assurance
• Able to do 12-hour rotating shifts (4-day work week and night shift)

THE ROLE

This individual is responsible for execution of compounding chemicals. He should be able understand the flow of mixing and work harmoniously with the group.

KEY RESPONSIBILITIES

• The incumbent manages the chemicals with the objective of minimize the mixing plant downtime, as well as assist technician on the BFS machine in times of shortage manpower.
• This position reports directly to the Chemical Process Supervisor.
• The incumbent works closely with CP Supervisor on matter of mixing priorities, manpower allocation, machinery documentation, and maintaining the cleanliness of the machinery.
• The incumbent is responsible for mixing process.
  a. Need to countercheck raw material needed for the mixing.
  b. Maintain the tanks and surrounding area free of dirt.
  c. Coordinate with group to do inline cleaning in place and steam in place.
  d. Documentation for RMR including bubble point test and chemical weighing.
  e. Regeneration of RO water system
• The incumbent is responsible for mixing flow, mixing plant breakdown and daily routine mixing plant. He should be able to understand the piping system of the plant tank and know to prepare the valves from the mixing area going to BFS machine. Must know how to collect water from the mixing plant going to BFS machine.

REQUIREMENTS

• Diploma in chemical field
• Experience in cleanroom area and pharmaceutical field.
• Able to do 12-hours rotating shifts (4-days’ work week and night shift)

T & C Manufacturing is looking for candidates with the following pre-requisites:

• Min. GCE "O" Level (chemistry and biology).
• Some Knowledge and experience in laboratory work.

Job Descriptions as follows:

1. To perform sensory evaluation, chemical and microbiological analysis on products and raw materials.
2. Understand sampling plan and methods of sampling and carry out raw materials and products sampling according to sampling plan if necessary.
3. Preparation of laboratory culture media and reagents when necessary
4. Prepare product sample upon request by customers or for internal and external lab testing
5. To record all information required into the provided inspection form and master list.
6. Maintain good housekeeping of the lab and equipments.
7. To inform QC HOD on lab inventory status to purchase necessary items and equipments for analysis.
8. Report to HOD if any non-conformances found on raw materials and products.
9. Keeping retained raw material product sample according to production date for future reference in case any quality dispute from customers.
10. To participate in company level activity task and duty from time to time.

01) Installing and setting up computer systems or software

02) Keeping an eye on the performance of computer networks and servers

03) Helping staff complete required actions to solve their IT issue

04) Identifying problems with systems or networks

05) Introducing new applications and devices to Management

06) Working closely with software developers and procurement managers

07) Checking that all equipment is safe and up to date

08) Technical support and troubleshooting for various hardware and software issues

09) Network maintenance and upgrades

10) Weekly reporting on IT operations

Interested please email to [email protected]

1. POSITION

Your appointment will be Production Technician. Reporting directly to Production Supervisor, your role and responsibilities are outlined as follows:

a) Carry out production activities under designated role and fulfill the membrane product orders;

b) Able to identify and trouble-shoot onsite and help resolve problems arise during production;

c) Carry out daily and in-process maintenance to ensure system stability and minimize downtime;

d) Support and assist Facilities Maintenance Manager during system breakdown or scheduled preventive maintenance works;

e) Upkeep proper and accurate production logs for production SOP and quality improvement;

f) Perform such duties and tasks as may from time to time be assigned.

Overtime work may be required and you shall be entitled to overtime pay based on MOM guidelines.

2. SKILLS & Requirements

a) At least completed and passed secondary school.

b) At least one year’s experience as a Production Operator in a manufacturing environment locally.

c) Familiarity with operating and maintaining production tools, machinery and equipment.

d) Excellent attention to detail and ability to follow instructions accurately.

e) Ability to work effectively in a team-oriented environment.

f) Ability to perform repetitive tasks accurately

g) Commitment to maintaining a clean and organized work area.

3. SALARY

Salary and allowances are based on skills and relevant working experience in similar manufacturing environment.

4. HOURS

Working hours of the Company are from Monday to Friday 8:30 am to 6:00 pm.

5. PROBATION

You are required to serve a probation period of three (3) months from the date of commencement.

6. OVERTIME

You shall be entitled to overtime pay and claims based on MOM’s guideline.

THE OPPORTUNITY

• Based in Singapore, the regional hub for Asia Pacific (AP) and top-ranked biopharmaceutical company on The Straits Times and Statista’s list of Best Employers in Singapore for two consecutive years (2020, 2021).
• Join the premier biopharmaceutical company that has been in Singapore for more than 25 years and in AP for over 60 years.
• Our Company is committed to provide patients and customers with a reliable supply of high-quality, safe and effective medicines and vaccines. Our global supply strategy relies on manufacturing capabilities and expertise to achieve this mission. Singapore is one of the key strategic manufacturing sites for our Company and patients. The local site operates multi-product facilities that manufactures active pharmaceutical ingredients, oral solid dosage, inhalation and sterile drug products.
• Looking for a change? The following presents an opportunity to work in the Packaging team.

Our Engineers support internal and external manufacturing operations remain operational, continuously improve and innovate. With our extensive range of facilities and environments, our Engineers have opportunities across many diverse areas including Biological, Chemical, Automation, Capital Projects, Maintenance, Safety, Process Development, Technical Services, Utilities and Validation.

In this role, you will:

• Act as subject matter expert (SME) in IPT Maintenance team with in-depth knowledge in Purified water system, HVAC and Electrical & Instrumentation.
• You will take ownership for the HVAC and purified water system day to day support and continues improvement.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Develop and implement maintenance program, preventive maintenance procedures and spare parts strategy for safe, reliable, and efficient operation of the systems/Equipment’s.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using our Production System.

Key Responsibilities:

Safety & compliance

• Lead or support investigation, participate in trouble shooting and root cause analysis for various operational events, and also ensure that all relevant engineering CAPA are completed within agreed timeline.
• Lead and manage change control on project activities or act as technical advisor for plant modifications, capital projects and other identified plant improvement projects in line with defined specifications, budget and qualification of facilities in accordance with site to approved procedures.
• Proactively review and challenge current activities to reduce safety risk for employees and quality risks for company’s products.
• Assist in overseeing testing, commissioning, qualification (IQ, OQ) activities are executed accordingly and in compliance.
• Maintain HVAC and Purified water systems are in optimum condition in compliance with Good Manufacturing Practice (GMP) & EHS requirements.
• Familiar with current applicable our standard & external standard for clean room/building environment and HVAC. When required, will also be familiar with other standards to provide full end to end support.
• Lead/participate in equipment failure troubleshooting and deviation investigations whenever required.
• Provide input during Basis of Design (BOD) and Detailed Design during large capital projects, applying good maintenance and reliability engineering principles whenever required.

Enhance and uphold maintenance quality.

• Implements technical solutions to improve equipment uptime and asset utilization through use of Continuous Improvement mindset (Lean methodologies)
• Supports Maintenance Lead to meet Profit Plan targets, optimize maintenance and product standard cost effectiveness in accordance with cGMP and Safety guidelines
• Responsible for improving the reliability of equipment and maintenance processes by applying the principles of Reliability Centered Maintenance.
• Lead and develop Business and GMP processes, formalized them into site procedures required for startup and commercial launch.
• Lead and perform Root Cause Analysis (RCA) for surfaced issues and implement a robust solution.

Operations excellence

• Plans, monitors, schedules, and implements measures on the Planned Preventive Maintenance Program and also ensures that the work is done in accordance with schedule and specification.
• Regularly review and revise maintenance program and procedures to increase equipment reliability, reduce waste and improve overall asset care process & cost efficiency.
• Work with Engineering & Safety, Health & Environment (SHE) to execute a 'reliability-centric’ maintenance plan
• Share best practices and lessons learned with the objective of improving asset utilization.
• Undertake activities to support realization of production, maintenance and product cost effectiveness with emphasis on equipment reliability and maintenance expenses.
• Conducts Maintenance effectiveness / optimization reviews along with IPT maintenance leads/Engineers/Technicians

Continuous Improvements (CI)

• Utilize Lean methodologies such as 5S, Standard Work, real-time problem solving (RTPS), to support execution of continuous improvement activities.
• Support the development of continuous improvement framework and work with the Maintenance team to identify opportunities.
• Compile and review data and develops action plans for critical HVAC systems and Purified water systems to improve reliability and reduce M&R cost.

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Degree in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 5 to 8 years of maintenance work experience in Chemical, Semiconductor, aviation, oil & gas or Petrochemical industry.
• Analytical and Problems solving skill with regard to Purified water system and HVAC Systems
• Knowledge in HVAC and Purified water system operation and Maintenance principle.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Knowledge of various clean room standards across the Pharmaceutical Manufacturing Industry will be an added advantage.
• Familiar with Life cycle of the HVAC system (from design, operations, controls monitoring, maintenance and obsolescence management).
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Demonstrated use of Reliability analysis tools such as FME, RCFA, etc.

Professional Competencies

• Resilient and resourceful
• Good oral/written communication and interpersonal skills
• Continuous learning mindset
• Foster team collaboration
• Strong work ethics

Who we are

We are known as Merck & Co., Inc., Rahway, New Jersey, USA in the United States and Canada and MSD everywhere else. For more than a century, we have been inventing for life, bringing forward medicines and vaccines for many of the world's most challenging diseases. Today, our company continues to be at the forefront of research to deliver innovative health solutions and advance the prevention and treatment of diseases that threaten people and animals around the world.

What we look for

Imagine getting up in the morning for a job as important as helping to save and improve lives around the world. Here, you have that opportunity. You can put your empathy, creativity, digital mastery, or scientific genius to work in collaboration with a diverse group of colleagues who pursue and bring hope to countless people who are battling some of the most challenging diseases of our time. Our team is constantly evolving, so if you are among the intellectually curious, join us—and start making your impact today

Perform various activities and tasks requiredin the tablet and capsule final packing equipment.

· Operate all relevant equipment, clean, assemble and maintain the cleanliness of the equipment.

· Perform and maintain the documentation of operations in accordance with cGMP requirement.

· Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.

· Perform online monitoring of in process parameters / checks throughout the batch.

· Complete all relevant records and other documentation required for packing and related equipment in the work area.

· Perform all activities in accordance with cGMP.

· Maintain the cleanliness of work area to ensure cGMP compliance.

· Perform all other relevant duties required to meet the schedule.

· Check relevant material and product details against batch document

· Co-ordination with Engineering for break down rectification of both primary and secondary packing lines

· Involve in equipment / process qualification.

· Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.

· Ensure compliance to GxP / Safety / Quality policies.

REQUIREMENT

· Good understanding of safe working practices and cGMP.

· Experience in bottle or blister oral solid dosage packing is preferred.

· A good team player with positive learning attitude.

· Willing to work in Tuas area, in cleanroom environment with full gowning.

EDUCATION & EXPERIENCE

· Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology / Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines

· With 2-5 years of manufacturing experience in Pharmaceutical or related industries.

· Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

As the Facility & Security Engineer, you will be responsible for overseeing all aspects of facility operation, maintenance and projects within our electricity generating plants, ensuring compliance with local regulatory policies. In addition, you will be involved in the development of a Facilities Asset Management Plan, identifying improvement opportunities and implementing best practices.

Responsibilities:

• Plan and coordinate infrastructure and equipment maintenance schedules & activities.
• Respond to work order requests and equipment maintenance schedules & activities.
• Investigate, analyze and determine root cause and report breakdowns and faults effectively.
• Carry out and review facilities’ maintenance programs and recommend actions as required.
• Identify and report on plant and equipment inefficiencies and possible improvement initiatives.
• Evaluate operational systems and facility infrastructure to ascertain and improve operational efficiencies.
• Monitor and review plant infrastructure, asset life expectancy and implement long-term maintenance plans.
• Prepare Purchasing Documents for the purchase of spares & the purchase of Work Services required to carry out the rectification works of the faulty equipment, faulty buildings’ infrastructure etc. (E.g. Preparation of tender specifications for service contracts such as cleaning, landscaping, pest control, waste disposals, card access systems, lifts & sewerage treatment plants’ service & maintenance works, auto-gates/ auto-barriers maintenance).
• Prepare the Facility Asset Management Plan (AMP).
• Design and oversee the implementation of facility expansion, layout, systems, and quality controls.
• Engage contractors and establish procedures to supervise and monitor the performance of contractors to ensure that the company’s requirements for work services are met.
• Ensure compliance with relevant regulations, building codes, and health and safety standards.
• Prepare technical reports on breakdowns, proposals and compliance documents.

Requirements:

• Degree in Mechanical, Electrical, Facilities Management Engineering or equivalent.
• At least 3 years of experience as a Facilities Engineer or in a similar role.
• Experience with SAP, and MS Office, especially Excel & PowerPoint.
• Knowledge of the building regulatory requirements in Singapore.
• Strong verbal and written communication skills.
• Strong troubleshooting, problem-solving and project management skills.
• Experienced in managing small to medium scale plant & building facilities incorporating maintenance plans, scheduling, costings, and cost controlling.
• Experienced in carrying out plant & buildings maintenance works, demonstrates personal creativity and/or flexibility in problem solving and budgeting process approaches

Job Info:

• Salary: Basic from $1700 - $2500 + AWS + VB
• Working Hour: Monday - Friday (7:50 am - 4:55 pm)
• Location: Joo Koon (Company transport at designated pickup point island wide)

Job Scope:

• Conduct routine chemical testing and analysis in the wet lab
• Prepare standard solutions, reagents, or conduct back titrations
• Maintain daily and monthly checklists
• Perform daily machine maintenance to ensure machines are in good operating condition
• Update and monitor chemical inventory and lab consumables
• Maintain and adhere to good laboratory 5S3T standards
• Handle precious metallic stock in and acknowledge receipts
• Support production with ad-hoc testing needs
• Conduct failure analysis using SEM, FTIR, GD, etc., in the dry lab

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Descriptions

• Perform FAI sample measurements and generate FAI inspection for submission to customer
• Perform FAI, In-process QC and Final QC Inspection.
• Perform receiving inspection and/or testing of subcon material/product, perform measurement testing of manufactured products
• Perform miscellaneous tests for quality engineering experiments and file inspection records to quality database

Requirements

• Holder of ITE NTC cert, hold technical skill related to machining industry.
• 2~3 yrs working experience mechanical machining, an added advantage CNC environment

Job Info:

• Salary: Basic from $2000 - $2700 + Shift Allowance $18/day + AWS + VB
• Working Hour: 8am - 8:15pm (4343 shift); Sunday - Wednesday/ Sunday - Tuesday/ Wednesday - Saturday/ Thursday - Saturday
• Location: Admiralty

Job Scope:

• Test electrical systems and circuits for continuity in wiring, equipment, and fixtures using testing devices like Multimeters and Insulation testers
• Ensure equipment is in optimal condition for production operations
• Assist Engineers in the transfer of new equipment products from Italy to Singapore, including installations and improvements to existing equipment. Identify and implement process enhancements to streamline operations
• Perform daily production tasks such as building, assembling, installing, maintaining, and repairing equipment. Provide technical support for production processes, conducting precise technical analyses, troubleshooting, and using precision instruments
• Conduct tests, helium leak checks, calibrations, repairs, installations, and diagnostics for equipment, components, parts, products, and processes/systems
• Follow established guidelines and standardized procedures/instructions
• Complete tasks within specified company timeframes and ensure quality standards are met
• Take corrective actions to ensure units and equipment operate safely and efficiently

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Roles & Responsibilities

Job Description & Requirements

Job Summary

See Oscar Training Matrix for position and unit. See GVO CAS for position and unit.

Minimum: Pre-hire Qualifications and Experience:

Qualified to Degree or HNC level.

2 years experience on hydrocarbon processing, with offshore operations experience desirable.

2 years experience in an administrative organization, preferably in the offshore industry.

Experience with Management Systems, preferably ISM/Management System and/or ISO9001/ISO14001.

Knowledge of statistics for analysis and managerial information systems.

Experience in Contract Administration.

Excellent computer skills, in particular Management System-Excel, Management System-Word, and Management System Project.

Fluent in spoken and written English

Medically fit to offshore International standards such as ENG1 or equivalent.

Conscientious, flexible, and versatile. Capable of assertive and positive communication and performance.

Good level of initiative and good team attitude. High levels of written and spoken communication in English language. Appropriate standard of technical, and professional knowledge as defined by competences.

High level of skill with standard 'Office' software package. Operation and use of Internet and electronic mail system.

Roles & Responsibilities

Job Description & Requirements

Good safety and supervisory attitude. Good levels of written and spoken communication in English language.

Clear understanding of personnel behavioural and team issues.

Appropriate standard of supervisory, technical, and professional knowledge as defined by competences.

Practical familiarity with standard 'Office' software package. Operation and use of Internet and electronic mail system.

Familiarity with Maintenance Management System packages AMOS/Maximo etc.

As Supervisor will exhibit good, supervisory and safety behaviours and will specifically ensure that all aspects of Engine Room operation and maintenance are carried out safely, through careful delegation and control of responsibilities.

As Supervisor is specifically responsible for the operation and maintenance of Engine Room equipment and Process utility systems controlled by the Engine Room and also for the guidance and familiarisation of those under his immediate supervision. Mechanical Technicians, Visitors, Vendor Technicians, and sub contractors

Typical Responsibilities & Standards

Engine Room Equipment and Systems and Utilities Operation and Maintenance

Prepare Engine Room and Utility Systems for start-up.

Start and Monitor Engine Room and Utility Systems.

Prepare and Shutdown Engine Room and Utility Systems.

Isolate and reinstate Engine Room and Utility Systems for Maintenance.

Perform Maintenance activities (For UMS Units)

Perform scheduled and unplanned maintenance safely and effectively under PTW Risk Assessment and Management System procedures.

Ensure work is correctly and accurately identified, recorded and communicated.

Roles & Responsibilities

Job Description & Requirements

Job Summary

See Oscar Training Matrix for position and unit. See GVO CAS for position and unit.

Minimum: Pre-hire Qualifications and Experience:

Qualified to Degree or HNC level.

2 years experience on hydrocarbon processing, with offshore operations experience desirable.

2 years experience in an administrative organization, preferably in the offshore industry.

Experience with Management Systems, preferably ISM/Management System and/or ISO9001/ISO14001.

Knowledge of statistics for analysis and managerial information systems.

Experience in Contract Administration.

Excellent computer skills, in particular Management System-Excel, Management System-Word, and Management System Project.

Fluent in spoken and written English

Medically fit to offshore International standards such as ENG1 or equivalent.

Conscientious, flexible, and versatile. Capable of assertive and positive communication and performance.

Good level of initiative and good team attitude. High levels of written and spoken communication in English language.

Appropriate standard of technical, and professional knowledge as defined by competences.

High level of skill with standard 'Office' software package. Operation and use of Internet and electronic mail system.

Roles & Responsibilities

Job Description & Requirements

Job Summary

Good safety and supervisory attitude. Good levels of written and spoken communication in English language.

Clear understanding of personnel behavioural and team issues.

Appropriate standard of supervisory, technical, and professional knowledge as defined by competences.

Practical familiarity with standard 'Office' software package. Operation and use of Internet and electronic mail system. Familiarity with Maintenance Management System packages AMOS/Maximo etc.

As Supervisor will exhibit good, supervisory and safety behaviours and will specifically ensure that all aspects of Engine Room operation and maintenance are carried out safely, through careful delegation and control of responsibilities.

As Supervisor is specifically responsible for the operation and maintenance of Engine Room equipment and Process utility systems controlled by the Engine Room and also for the guidance and familiarisation of those under his immediate supervision. Mechanical Technicians, Visitors, Vendor Technicians, and sub contractors

Typical Responsibilities & Standards

Engine Room Equipment and Systems and Utilities Operation and Maintenance

Prepare Engine Room and Utility Systems for start-up.

Start and Monitor Engine Room and Utility Systems.

Prepare and Shutdown Engine Room and Utility Systems.

Isolate and reinstate Engine Room and Utility Systems for Maintenance.

Perform Maintenance activities (For UMS Units)

Perform scheduled and unplanned maintenance safely and effectively under PTW Risk Assessment and Management System procedures.

Ensure work is correctly and accurately identified, recorded and communicated.

Roles & Responsibilities

Job Description & Requirements

Job Summary

See Oscar Training Matrix for position and unit. See GVO CAS for position and unit.

Minimum: Pre-hire Qualifications and Experience:

Qualified to Degree or HNC level.

2 years experience on hydrocarbon processing, with offshore operations experience desirable.

2 years experience in an administrative organization, preferably in the offshore industry.

Experience with Management Systems, preferably ISM/Management System and/or ISO9001/ISO14001.

Knowledge of statistics for analysis and managerial information systems.

Experience in Contract Administration.

Excellent computer skills, in particular Management System-Excel, Management System-Word, and Management System-Project.

Fluent in spoken and written English

Medically fit to offshore International standards such as ENG1 or equivalent.

Conscientious, flexible, and versatile. Capable of assertive and positive communication and performance.

Good level of initiative and good team attitude. High levels of written and spoken communication in English language. Appropriate standard of technical, and professional knowledge as defined by competences.

·High level of skill with standard 'Office' software package. Operation and use of Internet and electronic mail system.

Roles & Responsibilities

Job Description & Requirements

Job Title

A Mechanical Technician is responsible for ensuring allotted mechanical maintenance and repair work is carried out safely, efficiently and according to procedure and that his supervisor is made aware of all activities, especially where safety is an issue.

A Mechanical Technician is authorised to maintain and repair vessel mechanical equipment and systems.

Subcontractors, Visitors, Vendor Representatives Instrumentation probationer techs.

Typical Responsibilities & Standards

Dismantle Repair and Reassemble Mechanical Equipment.

Identify potential sources of hazard prior to dismantling.

Use correct procedures and correct method of dismantling.

Carry out the correct isolation and disconnection procedure.

Identified, checked and prepared components.

Apply appropriate tests and test equipment to ensure reassembly is correct and effective.

Use of Condition Monitoring on Mechanical Equipment.

Adjust instruments to meet the operating specification.

Make adjustments with minimum disruption to any ongoing activities and minimum waste of resources.

Monitor and record what has been carried out in work history or log.

Diagnose faults in Mechanical Equipment.

Respond promptly to problems in line with approved procedures.

Select appropriate tests and diagnostic procedures and apply them methodically. Carry out Visual, Close and Detailed inspections on Mechanical equipment.

Use the results of inspections to determine the appropriate actions to take.

Record an accurate and full description in the appropriate document history.

Monitor and Maintain Pollution Control Measures.

Unplanned discharges to the environment are identified, halted where possible, and reported according to policy, procedure and regulation.

Relevant PPE is used to deal with unplanned discharges using company procedures.

Equipment, waste or other materials for disposal are dealt with according to the correct procedure.

Environmental protection and pollution control are enforced effectively with colleagues, subordinates and subcontractors.

Contribute to The Health and Safety of the Working Environment

Work area within your own responsibility is kept clean and free of hazards.

Positive action is taken to stop hazards and unsafe behaviours.

Alarms are raised as appropriate and/or acted upon using applied policies and procedures or initiative.

Colleagues and subcontractors are alerted ASAP of any hazards or potentially dangerous changing conditions.

All potential and actual incidents are reported to the relevant supervisor.

Emergency Response

See Station Bill. Perform emergency response role.

Demonstrate competence during Emergency Response Drills and training exercises.

Roles & Responsibilities

Job Description & Requirements

Job Summary

Good safety and supervisory attitude. Good levels of written and spoken communication in English language.

Clear understanding of personnel behavioural and team issues.

Appropriate standard of supervisory, technical, and professional knowledge as defined by competences.

Practical familiarity with standard 'Office' software package. Operation and use of Internet and electronic mail system. Familiarity with Maintenance Management System packages AMOS/Maximo etc.

As Supervisor will exhibit good, supervisory and safety behaviours and will specifically ensure that all aspects of Engine Room operation and maintenance are carried out safely, through careful delegation and control of responsibilities.

As Supervisor is specifically responsible for the operation and maintenance of Engine Room equipment and Process utility systems controlled by the Engine Room and also for the guidance and familiarisation of those under his immediate supervision. Mechanical Technicians, Visitors, Vendor Technicians, and sub contractors

Typical Responsibilities & Standards

Engine Room Equipment and Systems and Utilities Operation and Maintenance

Prepare Engine Room and Utility Systems for start-up.

Start and Monitor Engine Room and Utility Systems.

Prepare and Shutdown Engine Room and Utility Systems.

Isolate and reinstate Engine Room and Utility Systems for Maintenance.

Perform Maintenance activities (For UMS Units)

Perform scheduled and unplanned maintenance safely and effectively under PTW Risk Assessment and Management System procedures.

Ensure work is correctly and accurately identified, recorded and communicated.

Duties & Responsibilities:

· Review and take-over instrument orders from Sales Team, process order in SAP system.

· Schedule and Plan schedules as per customer’s requirements to place order to factory.

· Prepare and provide standard Instrument Specification Sheets and Drawings to customers.

· Follow up with customer to get specification and drawing approval.

· Attend and lead Technical & Progress Review Meetings with clients.

· Coordinate with System Integrators to ensure product quality and schedules are kept.

· Coordinate with Purchasing Team for the issuance of PO to Suppliers

· Monitor scheduled shipment dates and perform expediting requests if required to ensure timely delivery to customers.

· Coordinate with Logistics Team for timely and seamless delivery arrangements.

· Monitor the stages of a project to ensure costs are kept within Sales forecast.

· Prepare and Compile Final Project Documentations prior to project closure.

Requirements:

· Diploma in Electrical/Electronic/Mechanical Engineering or instrumentation

· Experienced instrument measurement, Pressure, flow, Level, temperature, etc.

· Knowledge of Microsoft Office, Project, Power Point is compulsory.

· Preferably with Project Management experience

· Strong Team Player

· Able to work in a fast-paced environment.

Job Description

Provide engineering expertise support to the Singapore Manufacturing Complex for safe and reliable operations. The work includes but not be limited to engineering assessment, engineering design, plant troubleshooting and equip failure root cause failure analysis, long term equipment improvement initiatives and provide engineering solutions to problems in specific field

Job Requirements

Machinery Engineering Knowledge with experience in supporting petrochemical / polymer units. Familiar with typical machinery of chemical / polymer units. Preferred with prior experience at ExxonMobil sites.

For over 170 years, Leica Microsystems has helped shape the future by developing groundbreaking optical and digital solutions. As a global leader, we’re driven by continuous improvement to excite our customers and to create the best work environment for our people. Customer focus, innovation, and teamwork are at the core of our culture and the foundation of our success.

Want to be part of a company whose products are part of cutting-edge research around the world? Join Leica Microsystems in our commitment for brilliant solutions and insight.

Leica Microsystems is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

We currently offer the following position in our office in Singapore which will be on-site.

QUALITY TECHNICIAN

Overview

To perform incoming inspection of purchased material.

Responsibilities

• Perform independent receiving inspections of raw materials and incoming parts to ensure parts meet quality standards.
• Review material certifications against drawings and purchase order to ensure compliance to specifications.
• Document all inspection and test results appropriately to ensure the integrity of the quality data recording and reporting process.
• Respond timely to requests for engineering assistance and inspections.
• Identify and segregate non-conforming material.
• Re-inspect sorted or reworked material as required.
• Perform First Article Qualification to ensure part compliance.
• Comply and adhere to company Quality Management System and Environment, Health & Safety requirements.
• Perform other tasks assigned by Supervisor.

Your Profile

• ITE, NTC, NITEC with minimum 5 years of relevant working experience or Diploma in related fields with minimum 3 years of relevant working experience.
• Must have experience in using basic measurement instruments and First Article Qualifications
• Preferably have GD&T knowledge

What We Offer

• Equal pay is a given for us.
• Learn all there is about Kaizen, PSP's and Muda as part of our Danaher Business System (DBS) trainings - if you believe in continuous improvement like us.
• We offer a balance between support and autonomy to achieve your own goals in an international environment.

Get More Insight

Learn more about what we do and who we are by watching our company video “We Are Leica”: https://www.youtube.com/watch?v=1zHmalqMXN4

Are you interested to discover new opportunities in an innovative, team-oriented environment?

Do apply online - we are looking forward to your application!