Total 102 Maintenance / Repair job vacancies in jurong

Responsibilities:

1. Involve in manufactory processes

• Supervise process flow control
• Supervise machine/equipment setting control
• Quality Control in between processes
• Monitor issues and matters on manpower

2. Provide positive suggestions on improvement on process

3. Suggest machines/equipment alteration for better control and preventive maintenance programme

4. Ensure strict GMP control and guidelines

5. Any other assignment by Management

Requirement:

· Diploma in Pharmaceutical Technology

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Responsibilities:

Prepare Electrical and Instrumentation design documents including:

• Lighting design and calculation.
• Preparation of lighting layout 2D and 3D drawings, Lighting circuit diagram.
• Earthing and Lightning Protection design and drafting of layout, section, and elevation drawings.
• Cable ladder, conduit, trunking, cable routing design. Preparation of 2D and 3D design drawings.
• Cable sizing calculation, prepare Electrical cable schedule
• Prepare material take off (MTO) for material purchase.
• Fire Alarm, CCTV, Card Access, Public Addressing system design, preparation of system schematic and Layout drawings 2D and 3D.
• Preparation of Instrument Location layout drawing
• Preparation of Junction box termination drawings, Instrument Loop diagram
• Preparation of instrument Hook up, typical installation details
• Preparation of instrument cable schedule

Design coordination with internal design disciplines such as Structure, mechanical, piping team for design interface issue

Attend 3D model review and coordination with internal discipline engineers to resolves clashes.

Attend site survey and provide design sketches such as cable routing, support installation details, etc.

Support project tender team for material take-off from client tender documents.

Attend factory inspection for E&I related material such as Fire alarm, CCTV, MCC, PLC system

Support construction site to raise material purchase request, evaluation vendor quotation, preparation of Material approval submission.

Support site testing & commissioning work such as fire alarm system, CCTV System, DCS loop check, etc.

Requirements:

• Minimum Diploma in Electrical or Electronics Engineering.
• 3~5 Year of relevant design experiences
• Fresh graduates are welcome to apply
• Minimum hands-on experience for using design software such as AutoCAD MEP (Electrical), AutoCAD Plant 3D, Navisworks Manage, DIALux.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include operation of high-power lasers for cleaning related experiments, metal and composite sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. The roles and responsibilities include the following areas:

· Perform high-power laser material processing using robotics, CNC and hand-held systems on-site of ARTC and occasional visit to customer sites.

· Perform material testing, sample preparation, microstructure & defects analysis in fabricated coupons and parts.

· Tracking and managing lab resource utilization, procurement, and delivery.

· Storage space management and optimization.

· Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

· Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

· Assist in scheduling equipment utilization and procurement for project consumables.

· Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

· Identify and recommend improvement measurements to ensuring high quality in lab safety and 8S standards

Detailed Job requirements:

· Polytechnic/ Technical Diploma in Engineering

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Experience with high-power laser is preferred.

· 1-2 years of experience working in a lab is preferred.

· Strong attention to detail.

· Proficient in MS office.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. There will be opportunities to acquire advanced CAD/CAM skills and equipment operations through involvement in industry and competitively funded projects related to remanufacturing process technologies. The roles and responsibilities include the following areas:

-Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.

-Tracking and managing lab resource utilization, procurement, and delivery.

-Storage space management and optimization.

-Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

-Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

-Assist in scheduling equipment utilization and procurement for project consumables.

-Assist in lab equipment operation, collection of process data and analysis of results.

-Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

-Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Detailed Job requirements:

• Polytechnic/ Technical Diploma in Engineering
• 1-2 years of experience working in a lab is preferred.
• Experience with engineering CAD/CAM software such as NX UniGraphics, SolidWorks, AutoCAD will be advantageous.
• Strong attention to detail.
• Excellent verbal and written communication skills.
• Proficient in MS office.
• Ability to learn and adapt new technologies to stay relevant.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement from AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Extraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

Purpose and Scope

We are seeking a highly skilled and motivated E&I Engineer to join our team. The ideal candidate will possess extensive experience in electrical and instrumentation systems within power or utilities plant environments. This role involves ensuring optimal performance, safety, and reliability of E&I equipment while leading maintenance initiatives and improvements.

Key Roles and Responsibilities

• HSSE Compliance: Ensure adherence to plant Health, Safety, Security, and Environment (HSSE) standards. Actively participate in HSSE walkdowns and initiatives to maintain high safety standards.
• Methodology Preparation: Develop, review, and implement Method Statements (MS) and Risk Assessments (RA) for all electrical and instrumentation work activities to mitigate risks and enhance safety.
• Maintenance Planning: Plan and schedule both corrective and preventive maintenance works. Collaborate with operations, OEMs, and contractors to prioritize tasks, mobilize workforce, allocate resources, and procure necessary spare parts.
• Team Leadership: Lead and mentor technicians in executing preventive and corrective maintenance tasks, ensuring adherence to procedures and standards.
• Issue Troubleshooting: Diagnose and troubleshoot critical and major plant issues, participate in Root Cause Analysis (RCA) to identify solutions, and drive continuous plant improvement initiatives while managing costs effectively.
• Shutdown Management: Plan, schedule, and coordinate vendor/OEM shutdown maintenance of E&I systems. Lead shutdown activities and ensure thorough documentation is maintained.
• Procedure Development: Establish and optimize maintenance procedures for all electrical and instrumentation systems, promoting best practices.
• Instrumentation Expertise: Conduct maintenance and troubleshooting on field instrumentation, including control valves, performing loop checks, and executing calibration of instrumentation systems.
• Control Systems Proficiency: Troubleshoot and maintain PLC (Programmable Logic Controller) and DCS (Distributed Control Systems), with a strong emphasis on experience with Yokogawa Centum DCS systems.
• Electrical Systems Maintenance: Provide expertise in maintaining electrical systems, including switchgear, transformers, MV/LV switchboards, Fire alarm and CCTV systems.
• Spare Parts Management: Oversee the review and maintenance of plant critical spare parts inventory, ensuring availability and readiness.
• Documentation and Reporting: Maintain accurate records of maintenance activities and contribute to the preparation of technical documentation, standard operating procedures (SOPs), and maintenance manuals.
• Ad-hoc Duties: Execute other tasks and responsibilities as assigned to support operational objectives.

Qualification, Skills and Experience

• Bachelor’s degree or diploma in Electrical, Instrumentation, or Control System Engineering.
• Minimum of 8 years of relevant experience in a power plant or utilities plant environment.
• Technical Proficiency: Strong knowledge of field instrumentation, electrical systems, control systems, and industry standards.
• Problem Solving: Excellent analytical and troubleshooting abilities with a methodical approach to problem resolution.
• Team Collaboration: Proven ability to work effectively in a team environment, fostering collaboration and teamwork.
• Communication Skills: Strong communication and interpersonal skills, with the ability to present technical information clearly to various stakeholders.
• Proactive Attitude: Demonstrated ability to stay current with new technologies and apply innovative solutions to optimize plant operations.
• Leadership Qualities: Effective leadership and mentoring skills with a commitment to developing team members.
• Adaptability: Flexible and resourceful, with a positive attitude and willingness to learn from experienced colleagues.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Key Responsibilities :

o Perform routine and preventative maintenance tasks on industrial packaging machines and equipment;

o Carry out repairs, troubleshooting, and maintenance work on mechanical and electrical systems;

o Keep records of maintenance and repair work, including ensure spare parts inventory equipped at all times;

o Maintain a clean and organized work area, adhering to safety and efficiency standards;

o Ensure maintaining spare parts inventory levels and ensuring proper care and protection of maintenance tools and equipment;

o Assist Maintenance Chief to identify and implement continuous improvement initiatives;

o Obtain quotes from suppliers and internet purchases for comparison to achieve the most cost effective solutions while maintaining quality standards;

o Provide weekly updates on the status of ongoing maintenance tasks, servicing issues, and outstanding parts orders.

Requirements :

o Minimum 5 years of experience in maintenance, repair, and troubleshooting of industrial machinery, preferably in a beverage manufacturing environment;

o Diploma, NITEC, NTC-2, or ITC in Mechanical, Mechatronic, or Electrical Engineering;

o Competent in Microsoft Office preferred - outlook, excel, word, and CAD;

o Knowledge of industrial machinery, including packaging equipment, conveyor system, boiler, chiller, compressor and cooling tower etc;

o Familiarity with Electrical motors (AC/DC), Pneumatic and hydraulic systems, Valves and actuators, Pumps, Gearboxes and transmission systems, Sensor technologies (e.g., temperature, pressure, level, flow), Boiler and chiller systems, Water treatment systems, Packaging machinery and Material handling equipment.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. There will be opportunities to acquire advanced CAD/CAM skills and equipment operations through involvement in industry and competitively funded projects related to remanufacturing process technologies. The roles and responsibilities include the following areas:

-Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.

-Tracking and managing lab resource utilization, procurement, and delivery.

-Storage space management and optimization.

-Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

-Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

-Assist in scheduling equipment utilization and procurement for project consumables.

-Assist in lab equipment operation, collection of process data and analysis of results.

-Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

-Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Detailed Job requirements:

• Polytechnic/ Technical Diploma in Engineering
• 1-2 years of experience working in a lab is preferred.
• Experience with engineering CAD/CAM software such as NX UniGraphics, SolidWorks, AutoCAD will be advantageous.
• Strong attention to detail.
• Excellent verbal and written communication skills.
• Proficient in MS office.
• Ability to learn and adapt new technologies to stay relevant.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include operation of high-power lasers for cleaning related experiments, metal and composite sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. The roles and responsibilities include the following areas:

· Perform high-power laser material processing using robotics, CNC and hand-held systems on-site of ARTC and occasional visit to customer sites.

· Perform material testing, sample preparation, microstructure & defects analysis in fabricated coupons and parts.

· Tracking and managing lab resource utilization, procurement, and delivery.

· Storage space management and optimization.

· Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

· Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

· Assist in scheduling equipment utilization and procurement for project consumables.

· Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

· Identify and recommend improvement measurements to ensuring high quality in lab safety and 8S standards

Detailed Job requirements:

· Polytechnic/ Technical Diploma in Engineering

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Experience with high-power laser is preferred.

· 2 years of experience working in a lab is preferred.

· Strong attention to detail.

· Proficient in MS office.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary

Responsible for the proper maintenance of Building Facilities and its associated equipment

Responsible for successful execution of adhoc projects

Job Responsibilities

Managing

• Smooth operations of all building facility equipment.
• Manage all building assets and service contractors to ensure timely PM within scheduled month.
• Ensure and work on improvement projects within an annual maintenance cycle.
• Perform first line troubleshooting and recommends actions.
• Act as first line site investigations for fire alarm activation
• Manage cleanroom cleaning, mass wipe down, sterilisation and gown and shoe washing
• Manage contractor safety
• Ensure critical asset readiness

Operations

• Operate, check and sign off on all service reports for the following assets:
• Chiller, Cooling towers, condenser water and chilled water pumps, make up tank and Newater system
• Air conditioner filter washing and changing including server room CRAU units
• Check and sign off daily cleaner’s record logs
• Building Management Systems (BMS)
• Toilet assets, flushing system and flooring
• Portable water system and annual cleaning
• Fire protection systems, Fire hydrants, fire extinguishers, hose reels, dry risers and sprinklers systems
• Smoke detector and sensor testing at AHU and PUB transformer yard and switching rooms
• Server room FM 200 systems
• Mechanical and Electrical servicing including tripping handling, meeting rooms blind systems
• Mechanical Fresh air fan and exhaust fans
• Lift operations and maintenance
• Phone system patching
• CCTV, EM locks, PA system and vehicle barrier system
• Testing of generator including monitoring diesel supply
• UPS system and battery checks including external bypass system
• All lighting fixtures, timers, motion sensors within the building and its perimeters
• Third party verification of cleanroom display boards, lighting protection test and IR imaging test annually
• Fume scrubber and pH maintenance
• Write new and update Work instructions (WIs) and update record forms
• Update drawings
• Maintain and issue keys
• Records all daily utilities consumptions
• Maintain records to satisfy ISO 14001 requirements
• Monitor BMS issued daily SMS alarms
• Maintains record keeping for service reports
• Attends to internal and external audits
• Maintain all activities in Log Book
• Collate all critical equipment reliability and water treatment data

Personnel

• Establish skills training to perform higher level tasks
• Standby to tackle any off office hour emergencies and request
• Maintains good working relationship with in house contractors and external vendors
• Work with all affected stakeholders and assist in admin requests

Site/Safety

• Ensure contractors execute all works according to PTW requirements
• Assist in emergency mechanical and staircase pressurisation fans readiness
• Assist in Fire Certificate testing and recording
• Tests all EXIT lightings and emergency backup lightings
• Performs downloading of CCTV footages requests
• Assist in lift testing and load testing
• Assist in first line fire alarm activation investigation
• Sits in WSH committee and acts as fire warden

Planning

• Maintains spare inventory and makes reorder level
• Calls for RFQ for PM works and service
• Plan and coordinate adhoc maintenance works

Job Requirements

• Minimum ITE qualifications with 2 years working experience
• Knowledge and understanding of Cleanroom protocols will be an added advantage
• Able to perform additional tasks on weekends and standby duties
• Good interpersonal relationship and communication with contractors
• Able to produce simple reports and email communications
• Good understanding of WSH rules and ISO 14001 requirements

Job Description:*

We are seeking a highly skilled and experienced LSA/FFA (Life-Saving Appliances/Fire-Fighting Appliances) Technician to join our team. The ideal candidate will have a minimum of 4 years of hands-on experience in the installation, troubleshooting, and annual maintenance of liferafts, lifeboats, and fire-fighting equipment. A strong understanding of class regulations and SOLAS (Safety of Life at Sea) requirements is essential for success in this role.

*Responsibilities:*

Install, inspect, maintain, and repair various life-saving appliances (LSA) and fire-fighting appliances (FFA) aboard vessels, ensuring compliance with class regulations and SOLAS requirements.

Conduct routine inspections and testing of liferafts, lifeboats, fire extinguishers, fire hoses, and other firefighting equipment according to manufacturer guidelines and regulatory standards.

Perform troubleshooting and diagnosis of equipment malfunctions, identifying and resolving technical issues promptly and effectively.

Conduct annual maintenance and certification of LSA/FFA equipment, adhering to industry best practices and safety protocols.

Keep accurate records of maintenance activities, inspections, and repairs, maintaining detailed documentation for regulatory compliance purposes.

Collaborate with ship crews, marine engineers, and other stakeholders to ensure the safe and reliable operation of life-saving and fire-fighting systems onboard vessels.

Stay updated on the latest industry developments, regulations, and technologies related to LSA/FFA equipment, participating in training programs and workshops as necessary.

*Qualifications:*

Minimum of 4 years of experience as an LSA/FFA Technician or similar role in the maritime industry.

Proficient understanding of class regulations, SOLAS requirements, and other relevant maritime standards.

Strong technical skills with hands-on experience in the installation, maintenance, and repair of liferafts, lifeboats, fire extinguishers, and related equipment.

Excellent troubleshooting abilities, with the capacity to diagnose and resolve equipment malfunctions efficiently.

Detail-oriented with a focus on accuracy and compliance with safety standards and procedures.

Effective communication skills, with the ability to collaborate with diverse teams and communicate technical information clearly and concisely.

Flexibility to work in challenging maritime environments and willingness to travel as needed.

Relevant certifications or training in LSA/FFA maintenance and inspection preferred.

Join our team and play a vital role in ensuring the safety and security of maritime operations by maintaining high-quality life-saving and fire-fighting equipment onboard vessels. If you meet the qualifications and are ready to contribute your expertise to our dynamic team, we encourage you to apply.

SUMMARY:

Responsible for the safe, reliable and cost effective maintenance and repair of the fleet and facilities by effectively planning and managing the workshop resources to maximise efficiency and productivity, in the process ensuring that scheduled work is completed on time and within budget, making due allowance for effectively dealing with the unscheduled work that arises during the course of daily operations. In meeting this prime objective, full compliance with all Company policies and procedures are mandatory with particular reference to health, safety and environmental legislation.

PRINCIPAL RESPONSIBILITIES AND AUTHORITIES:

• Responsible for running and updating the vehicle inspection, servicing and MOT plans on the computerised fleet management system.
• Responsible for allocating the details of the repeat and breakdown defects to the relevant Engineering Supervisor and ensuring that adequate remedial action is taken.
• Responsible for ensuring that all vehicle records are kept up to date and comply with all company policies, procedures and legislation.
• Identify and establish reasons for poor vehicle component performance, formally reporting such incidences to the Fleet Maintenance Manager with the full facts and implications.
• To manage and motivate the engineering team to achieve good standards of performance, level of commitment, awareness and motivation. Identify training and development needs and arrange appropriate training. Encourage staff to share their skills and knowledge.
• To develop and foster a culture of continuous improvement and problem solving amongst the engineering staff. In conjunction with technical personnel, strive for high levels of diagnostic skills to be attained.
• Undertake the delivery of regular tool box talks and team briefings to the engineering workforce documenting all such occasions and the attendees.
• Responsible for planning and controlling the engineering staff holidays and cover arrangements to ensure there are at all times sufficient levels of resource available on all shifts to meet the operational business requirements.
• Responsible for ensuring that adequate numbers of Engineering staff hold and maintain a valid vocational licence, planning for sufficient vocational licence holders to be on duty to provide adequate resource for workshop and on-the-road support throughout the traffic day.
• Develop the relationship between the stores and the workshop to promote cooperation. Arrange for the correct component parts to be available when scheduling vehicles for repair. Review stock levels to ensure they match demand without exceeding budgeted levels of stock holding.
• Monitor the performance of external contractors undertaking vehicle maintenance and repair to ensure quality of work and compliance with vehicle maintenance standards.
• Produce on a timely basis, engineering cost statements for use in third party insurance recoveries ensuring that all labour and material costs are accurately captured and documented.
• Consult with Trade Union Representatives with the objective of maintaining good industrial relations whilst exercising appropriate management leadership.
• Responsible for ensuring personal knowledge is maintained of all the relevant company policies and procedures and that they are adhered to at all times. Additionally, maintain a working knowledge of current legislation that is relevant to the engineering function.
• To provide cover for the Fleet Maintenance Manager, having available suitably trained support from an engineering supervisor to cover Workshop Planner duties.
• Contribute to the effective management of the engineering function on a day to day basis to develop and maintain good relations with the Operations Dept. who are ultimately the customer.
• Making sure of MAR result achieved at high rating.
• Undertake any additional reasonable duties at the request of the Line Manager.
• Undertake any training and development activities at the request of the Line Manager.

SKILLS, EXPERIENCE, CONDITIONS SPECIFICATION:

• Minimum of Diploma in engineering.
• Flexibility of working hours if effective control of the 24/7 engineering function is to be maintained.
• Man management, leadership and organisational skills are important and essential qualities that are relevant to the role.
• Computer literate with a broad knowledge of a range of software products.
• Knowledge of all the legislation relevant and necessary for running a safe and reliable vehicle fleet and engineering workshop.
• Conversant with the requirements that ensure safe and legally compliant operation of all workshop and depot plant and equipment.
• Experienced and competent in the use of computerised fleet and inventory management systems.

Duties & Responsibilities:

· Manage equipment to monitor instrumentation systems

· Responsible for instrumentation installation and network establishment

· Monitor work progress and preparation of necessary reports

· Liaise and coordinate with contractors, clients and co-workers to ensure smooth completion

· To troubleshoot, repair and resolve technical issues pertaining to electrical/ network

· Attend meetings when required

· Any other duties as assigned

Requirements:

· Degree/ Diploma in Civil Engineering or equivalent

· Min. 1 year of experience

· IT/ Software background is an advantageous

· Keen interest in geotechnical instrumentation and relevant experience will be advantageous

· Able to work independently and as a team

· Good communication and interpersonal skills

Our Production Technicians operate our chemical processes and perform production related activities, utilizing their chemical manufacturing knowledge and experience to operate and troubleshoot the plant in a safe and efficient manner. The Production Technician works in a team environment where collaboration and teamwork are critical to meeting the goals of the business.

Production Technicians are required to work shift work including nights, weekends, and holidays.

Job Responsibilities include but are not limited to:
- Safely and efficiently operates their assigned processes to meet the day-to-day quality, production and productivity goals of ALAM.
- Effectively prioritizes their daily tasks working with the Production Leads and Production Supervisors.
- Participate in monthly safety meetings and promote a safe work environment
- Actively participate on ALAM’s emergency response (ER) team and ER entry team
- Reviews and updates the Standard Operating Procedures
- Reviews and updates the Learning Resources for the processes
- Completes annual personal goals to achieve the plant goals and their own personal development goals
- Assembles and disassembles production equipment
- Performs basic maintenance on equipment
- Drives a culture of "Do It Safe, Do It Right the First Time" with their actions and their words on a daily basis
- Successfully complete all assigned training
- Cross-trains peers on approved functions
- Ability to roll cylinders- Rolling cylinders requires an individual to tilt a cylinder slightly with one hand, and use the other hand to move the cylinder forward by rolling it
- Fitness for duty, including but not limited to: ability to lift 50 pounds and have the ability to climb ladders
- Actively participate on ALAM’s emergency response (ER) team including as an ER entry team member, which requires wearing a tight fitting full-face respirator

Job Description:

To perform preventive and corrective maintenance works on equipment to ensure equipment can function/operate properly and safely.

Responsibilities :

1 Carry out preventive maintenance works in accordance to the schedule.

2 Carry out corrective maintenance works as when required.

3 Observe safety work procedures.

4 Ensure that tools provided are properly kept and used.

5 Observe proper behavior while working.

6 Perform standby works when required.

7 Follow-up on breakdown report and assist Standby Section where required.

8 Report to the superior on all matters relating to the section.

9 Carry out any other duties as assigned by superior.

10 To keep proper records of works carried out in the relevant reports.

11 Attend to the building or equipment inspection as required, by law (BCA, FSB).

12 Assist in conducting and investigation of damages/ accidents to equipment or personnel.

13 Follow-up on QA defects.

14 Ensure compliance to Environmental Policy, reduction of waste and prevention of pollution.

15 Perform maintenance work under supervision.

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Responsibilities

• Perform circuit troubleshooting and general failure analysis.
• Perform installation, maintenance, repair, and replacement of all electrical jobs.
• To execute work plan and ensure job compliance to quality standards.
• Ensure compliance with safety regulations.
• Able to understand job requirements and execute tasks given by team leader.
• Attend to ad hoc job required for train, bus, and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently, or through team activities.
• Self-motivated, highly resourceful, and organized.
• Self-disciplined to carry out tasks responsibly.
• Work cooperatively in a team with other technicians to complete assigned tasks.
• Have a positive and pleasant attitude.

Job Responsibilities:

• Be responsible for the company's network, service equipment, the daily operation of desktop and management of the company's IT operation
• Provide on-site service support and handle the installation and maintenance of client's computer desktop, hardware and network equipment
• Be responsible for debugging and troubleshooting the video conference system
• The installation, debugging, configuration and maintenance of the desktop equipment (e.g. desktop, notebook, printer, printer, video conference, telephone, etc.)
• Communication with users to ensure the normal operation of the system
• Normal maintenance of network and computer room management (configured switches and firewalls basically)
• Management of the company's IT assets
• Other IT works assigned by the department manager and work report

Job Requirements:

• College degree and above, major in computer and other related fields
• Familiar with the basic network technology, the working principle of TCP/IP protocol, proficient in the configuration of brand network equipment such as Feita and Cisco, and experienced in the operation and maintenance management of computer room is preferred
• Familiar with mainstream systems such as Windows and Mac operating systems, common conference systems and equipments such as Polycom/Cisco/Teams. Experienced in deploying and debugging systems related to AD domain is preferred
• Good communication skills, initiative in work, strong learning ability, teamwork spirit, ability to work under pressure, strong sense of responsibility and service
• More than three years of relevant IT helpdesk experience. Experienced in system research and development with logical thinking is preferred
• Handle common computer hardware and software failures independently
• Accept the occasional business trip and hardworking
• Proficient in both English and Mandarin

Description

• $2600 - $3200
• 5.5 Days work
• 8am to 5pm, 8am to 12pm
• AWS + VB
• Shipbuilding Industry

Responsibilities:

• Perform inspections, troubleshooting, and maintenance on a variety of marine equipment
• Diagnose and repair mechanical, electrical, and electronic issues
• Maintain detailed records and documentation
• Installs and repairs wiring, fixtures, and equipment for all electrical services aboard ship and in shipyard facilities

Requirements:

• Diploma in Electrical or similar
• At least 1 year working experience in electrical repairs and maintenance
• Candidate possess LEW certificate with EMA or hold a valid Licensed Electrical Worker (LEW) certification is an added advantage

Interested applicants, kindly send your updated resume to +65 8288 5668 or Email to "[email protected]"

We regret that only shortlisted candidates will be notified.

EA Reg. No: R1880058 | Dylan

EA License No: 15C7752

The Network Technician is responsible for installing, amending, and removing unnecessary cablings and other network peripherals.

The activities may include but not limited to:

• Install well-functioning computer networks, connections, and cabling.
• Perform troubleshooting to system failures and identify bottlenecks to ensure long term efficiency of network.
• Inspect LAN infrastructure and fix minor or major problems/bugs.
• Test and configure software and maintain and repair hardware and peripheral devices.
• Evaluate network performance and find ways of improvement

Make an Impact by

Technical Experience

• Experienced in Layer 1 Physical administration in enterprise DC and Port Environment.
• Responsibilities Analyzing, troubleshooting, and correcting network problems remotely/on-site
• Maintaining an inventory of network equipment along with their specifications
• Troubleshooting problems with computers, printers, network devices, or other network components to ensure optimal performance.
• Provide support for Level 1 escalated issues.
• Performing standard or project change request as per change window (non-business hours)
• Performs any other related duties as assigned by the team lead/manager.
• Driving within Port

Rack Condition

1. Rack Sighting
2. Rack Available
3. Rack Locked
4. Rack Fan Working
5. Rack Cleanliness
6. Power Cables Secured

Environmental Condition

1. Temperature (Check the location of the temperature and inform the authority or our engineer)
2. Other Environmental Factors (Dust, Dirt etc.), if Duty then need to clean the rack or space where device is located.
3. Physical Health of Device (Randomly need to check the device health).
4. AGV Preventive Maintenance.
5. Rack Mount and Dismount (Installation, Removal and Addition)

Labelling

1. Labelling Condition (verify labelling of device if not okay then need to relabel the device.

Skills for Success

• Must possess a valid Singapore class 3 driving license
• Diploma in Computer Science / IT or equivalent
• Minimum 1 year of experience in hands-on experience with common software and hardware installation and deployment

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency.
• Attend to ad hoc job at train and bus depots.
• Responsible for personal and safety of others accordance to workplace and health safety act.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Responsibilities

• Perform circuit troubleshooting and general failure analysis
• Perform installation, maintenance, repair, and replacement of all electrical jobs
• To execute work plan and ensure job compliance to quality standards
• Ensure compliance with safety regulations
• Able to understand job requirements and execute tasks given by team leader
• Attend to ad hoc job required for train, bus, and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience
• Able to perform assigned tasks physically, independently, or through team activities.
• Self-motivated, highly resourceful, and organized
• Self-disciplined to carry out tasks responsibly
• Work cooperatively in a team with other technicians to complete assigned tasks
• Have a positive and pleasant attitude.

Responsibilities

• Prepare polymer additives for production usage.
• Carry out lab evaluation of finished products using testing equipment.
• Quality checks on finished products as well as production samples.
• Ensure proper documentations of results, equipment and consumables.
• Ensure proper sample management according to SOPs.
• Prepare test reports/Certificate of Analysis.
• Carry out safety and housekeeping activities in the department.
• Any other duties as and when required to be done by Quality Manager.

Requirements

• Possess at least ITE/Diploma in Chemical Process Technology, Chemistry Chemical Engineering, Science & Technology, Polymer Science or equivalent.
• Fresh graduates are welcomed. Preferably 1 to 2 years of relevant experience in lab testing/chemical/ petrochemical industry.
• On-the-job training will be provided.
• Keen to learn and responsible.
• Good interpersonal and communication skills.
• Team player.
• Meticulous with an eye for accuracy.
• Proficient in MS Office.

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.