Total 4,295 infrastructure engineer job vacancies in Others category in Singapore

Job Description & Requirements

1. Preparation of shop drawing

2. Preparation and submission of necessary document prior to start boring work

3. Supervise in confirmation of soil boring and rock caring. And submissio0n of pile length calculation (if required)

4. Co-ordination with main contractor and consultant’s representative.

5. Preparation and submission of bored pile installation record

6. Supervise and arrange the site team & progress thereafter report to project manager

7. Preparation of bored pile summary and submit to main contractor and HQ

8. Submission of as built pile penetration and eccentricity drawing

9. Receiving the time to time instruction of project manager

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Responsibilities:

• Lead the automation and autonomous development of warehouse processes, and exploring new frontiers in warehouse technology.
• Develop and implement strategies to optimize human-machine collaborations, ensuring lean and effective spares/material storage and distribution from Warehouse to Fab.
• Ensure the timely and accurate receipt and distribution of both inventory and non-inventory goods to internal customers.
• Maintain inventory stock through regular cycle counts and inventory auditing.

Requirements:

• Bachelor's or Masters Degree in Engineering, Science, Supply Chain management, Logistics and related field
• Proficiency in warehouse automation systems, robotics, and related software
• Equivalent experience in warehouse processes, logistics, and supply chain management would be helpful

• Assistant the Project Manager in overseeing the project, planning and ensure work is carry out according to master program
• Liaise with the consultant on technical issue and doing coordination on site issues with sub con
• Work with project team and ability to resolve technical issues
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil) or equivalent.
• At least 2 year(s) of working experience in the related field is required for this position.
• Experience in building projects.

ACMV ENGINEER (AutoCAD)

• Jurong east
• 5.5 days (Mon – Fri 8:30am - 5:30pm / Sat 8:30am – 12:30pm)
• Salary range: $3000 - $4000 + transport allowance + variable bonus
• Yearly renewable contract basis, with end contract incentive

Interested applicants can send your resume to 8739 9469 Janie and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

JOB REQUIREMENTS

• Min Degree in Mechanical / Engineering / Building Science or Facilities Management
• Min 3 to 5 years of relevant working experience in operation, servicing and maintenance of ACMV systems
• Experience in Liquid Desiccant System and Absorption Chiller System will be an added advantage
• Adequate knowledge of medium voltage & low voltage electrical systems
• Familiar with AutoCad

RESPONSIBILITIES

• To lead a group of Technicians to carry out day to day servicing and maintenance of building's ACMV system/Smoke Detection System, Slab Cooling System and other small M&E System
• To support facilities operations and able to provide engineering solutions to enhance M&E systems' reliability and robustness
• To liaise and co-ordinate project site works with clients, building managing agent, consultants, vendors/suppliers and sub-contractors
• To ensure effective and efficient preventative maintenance to prevent down time
• To prepare yearly, quarterly & monthly maintenance schdule
• To prepare monthly progress report for maintenance work
• To monitor and assess service contractors' performance
• To manage the documentation of PO, DO, Service reports, etc
• To assist Project Manager in plan, design, tender and manage project work

#SCR-jiajia-fun

Fun Jia Jia (Janie) | Reg No: R22107945
The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Job Responsibilities

• Analyze project requirements and develop innovative solutions to meet customer needs.

• Design high precision and high-tech automation equipment, ensuring that it meets performance, quality, and reliability standards.

• Select components such as servo axes and robots based on project requirements.

• Coordinate with fabrication houses and component suppliers to ensure timely delivery of parts and components.

• Guide assembly technicians in building and testing the equipment, ensuring that it meets design specifications and performance requirements.

• Conduct design reviews and provide feedback to ensure continuous improvement of our products.

• Stay up to date with the latest developments in mechanical engineering and automation technology.

• Other duties as assigned.

Job Requirement

• Bachelor’s degree / Diploma in Mechanical Engineering / Mechatronics or related field preferred.

• Minimum 6 years of relevant experience in automation equipment design.

• Knowledge and experience in factory automation is an advantage.

• Ability to work independently and as part of a team.

• Experience in electrical, pneumatic, and sensor component selections.

• Proficient in SolidWorks 3D software.

• Strong understanding of mechanical engineering principles, materials, and manufacturing processes

• Strong problem-solving abilities and attention to detail.

• Strong written and verbal communication skills, with strong interpersonal abilities.

Responsibilities:

• Prepare CAD drawings, REVIT/BIM to support customer’s project specifications and requirements
• Create drawings based on PDF, hand drawn or verbal instructions using AutoCAD to support customers’ project requirements
• Calculate material requirements and liaise with internal team for accurate and timely material orders
• Prepare drawings and compile documentation for project submission

Requirements:

• Possess 3 years of proven experience in AutoCAD/REVIT/BIM, preferable in mechanical engineering field
• Possess excellent computer skills in AutoCAD software, BIM and MS Office (Excel, Powerpoint, Word & Project)
• Independent, team player with ability to multi-task
• Possess strong communication and organization skills

You will be part of the Managed Services team. Your responsibilities include technical administration, maintenance and troubleshooting. You are expected to work with our client to ensure IT Support Services are delivered based on agreed service level definition, much to the satisfaction of both customers & company. Managing customer’s expectation is part of your job scope, which required of you to work closely with external & internal project team members. You are expected to be a fast learner, to acquire technical implementation skill as and when needed due to business requirements. You need to have a strong analytical and problem-solving skill, so as to excel in supporting our customers.

KEY RESPONSIBILITIES

• Monitor condition of server, apps and security measures
• Identify, log and resolve technical problems of the scope (Incident Management)
• Ensure that work is carried out within agreed service levels (Service Request / Incident / Change / Patch Management)
• Respond to site to troubleshoot, diagnose and rectify faults
• Liaise and coordinate the recovery of systems
• Identify potential changes and system improvements for consideration and implementation (continuous improvements)
• Create, maintain and distribute reports of progress to service delivery manager.
• Any other ad-hoc tasks assigned

JOB REQUIREMENTS

• Good knowledge of windows operating systems, Clusters, NLB, or Unix
• Good knowledge of OS Provision, hardening and patching.
• Good knowledge of Solarwinds, Manage Engine.
• Good knowledge of AV solution such as Symantec.
• BMC Control-M
• Good server experiences like AD administration & basic networking experiences
• At least 3 years of relevant working experience in infrastructure support is required for this position.

SOFT SKILLS:

• Self-driven and must be effective in working both independently and in a team setting, with minimum supervision.
• Good problem solving and logic skills
• Good communication skills (verbal and written) in English
• Excellent customer management skills

QUALIFICATIONS:

• Diploma or Bachelor degree in Computer Science, Engineering, Information Technology or related discipline from a recognized institution.
• Information Technology Infrastructure Library (ITIL) foundation certification

You will be part of the Managed Services team. Your responsibilities include technical administration, maintenance and troubleshooting. You are expected to work with our client to ensure IT Support Services are delivered based on agreed service level definition, much to the satisfaction of both customers & company. Managing customer’s expectation is part of your job scope, which required of you to work closely with external & internal project team members. You are expected to be a fast learner, to acquire technical implementation skill as and when needed due to business requirements. You need to have a strong analytical and problem-solving skill, so as to excel in supporting our customers.

KEY RESPONSIBILITIES

• Monitor condition of server, apps and security measures
• Identify, log and resolve technical problems of the scope (Incident Management)
• Ensure that work is carried out within agreed service levels (Service Request / Incident / Change / Patch Management)
• Respond to site to troubleshoot, diagnose and rectify faults
• Liaise and coordinate the recovery of systems
• Identify potential changes and system improvements for consideration and implementation (continuous improvements)
• Create, maintain and distribute reports of progress to service delivery manager.
• Any other ad-hoc tasks assigned

JOB REQUIREMENTS

• Good knowledge of windows operating systems, Clusters, NLB, or Unix
• Good knowledge of OS Provision, hardening and patching.
• Good knowledge of Solarwinds, Manage Engine.
• Good knowledge of AV solution such as Symantec.
• BMC Control-M
• Good server experiences like AD administration & basic networking experiences
• At least 3 years of relevant working experience in infrastructure support is required for this position.

SOFT SKILLS:

• Self-driven and must be effective in working both independently and in a team setting, with minimum supervision.
• Good problem solving and logic skills
• Good communication skills (verbal and written) in English
• Excellent customer management skills

QUALIFICATIONS:

• Diploma or Bachelor degree in Computer Science, Engineering, Information Technology or related discipline from a recognized institution.
• Information Technology Infrastructure Library (ITIL) foundation certification

PRODUCT ENGINEER

• Troubleshooting & set up of semiconductor equipment

• Create procedures for assembly, inspection and testing of equipment

• Collaborating with the engineering team and software team to optimise system design

• Work with cross-functional engineers to resolve system issues

Requirements:

• Diploma/ Degree in Mechanical or Mechatronics Engineering

• More than 3 years of experience in setting up automation equipment

• Knowledge of electro mechatronic systems

• Able to travel overseas for field support when required

Salary: Up to $5K

Location: Near to Lavender & Bendemeer MRT

Interested candidates are welcome to email their resume to [email protected] and CC to [email protected]

TECHNICAL SALES ENGINEER

• Provide pre- and post-sales technical support to customers

• Technical support of field service engineers and customers when required

• Evaluating and establishing vision system performance specifications

• Manage customer specific projects & documents

Requirements:

• Diploma/ Degree in engineering discipline with minimum 1 year experience

• Knowledge in field servicing and semiconductor industry

• Proficient in Microsoft

Salary: Up to $6K

Location: Near to Lavender & Bendemeer MRT

Interested candidates are welcome to email their resume to [email protected] and CC to [email protected]

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND products.
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing CVD/PVD teams on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise R&D to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

Requirements

• Master degree or higher in Materials Science, Chemical/Microelectronic Engineering, or Physics.
• A deep understanding of chemical kinetics, thermodynamics, physical phenomena and their direct application to CVD/PVD deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise R&D for 4-6 months at a stretch to work on technology development.

Job Responsibilities

• Advanced process development tasks SEM CD, OCD or other metrology techniques in 3D NAND technology.
• Identify and provide solutions for inline detection in collaboration with process engineer and process integration.
• Identify modeling opportunities using metrology and detection data to explain electrical failed signature at probe
• Collaborate with US TD Metro team on technology choices for the upcoming nodes and able to translate future technology device needs into clear equipment roadmap requirements.
• Work closely with the planning team to understand Model-on-record (MOR) impact of new technology. Maintain MOR accuracy to enable successful technology ramp.
• Influence vendor equipment roadmap to enable new technology development in Micron

Requirements:

• Masters/PhD in Engineering would be advantageous
• Experience with semiconductor inspection equipment is preferred.
• Data Science and Data Manipulation skills: Ready to learn and apply basic scripting, coding, or programming.
• Preference for metrology or inspection experience: Especially related to data analysis and root cause investigation.
• Capable of international travel up to 3-5 months
• Good communication skills (verbal and written)

Our client is a Global Manufacturing MNC. Due to their current expansion plan, they are looking for a Senior Automation Engineer to join their team, in hopes of developing the current high performing team. They are located in the North.

Job Responsibilities:

• Develop, cost, and implement mechanical, electronic, and digital processes to enhance efficiency and increase yield of the organisation, from idea to pilot phase.
• Provide guidance on Smart Automation and Industry 4.0 initiatives.
• Establish process monitoring plans for consistent operations.
• Provide timely support to Operations and Quality Assurance teams, from pilot to production phase.
• Collaborate with partners to improve overall organisation’s capabilities.
• Any other duties as assigned.

Requirements:

• Minimum Bachelor or Master in Engineering relevant equivalent field of study.
• Minimum 5 years relevant experience.
• Knowledgeable/experience in CAD/CAM would be advantageous.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process/MS&T Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

• Process engineering related to design, layout, user requirement specifications and operations of process equipment.
• Lead an equipment installation project from Design, URS, FRS to vendor selection, management, installation oversight, walkdown up to CQV of the systems
• Write systems life cycle documentation for bio-process equipment
• Draft, Review and Finalize User Requirement Specifications (URS), Functional Specifications (FS) and Design Qualification (DQ) protocols.
• Draft operation and maintenance manuals, SOPs, Batch process sheets and procedural documents in accordance to GMP guidelines.

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

SOFTWARE ENGINEER

• Software development and implementation for high speed automated equipment

• Software design, coding, testing, debugging and validating

• Evaluating and establishing system performance and specifications

• Provide software technical support to a team of field service engineers

• Software maintenance of existing equipment

Requirements:

• Degree in any Engineering discipline with minimum 3 years of

experience in software development in the automation /

semiconductor industry

•Hands-on experience in programming multi-threaded

windows application using Visual C++

• Good knowledge of electronic components, motion control and interfacing with inspection systems

• Able to travel overseas for field support when required

Salary: Up to $5K

Location: Near to Lavender & Bendemeer MRT

Interested candidates are welcome to email their resume to [email protected] and CC to [email protected]

Responsibilities

• Process module ownership involving regE process characterizations and advanced process developments for 3D NAND and beyond.
• Work with process development engineers in Singapore and Boise, US TD site and vendors to develop regE processes that meet integration requirements for next-generation 3-D NAND nodes.
• Transfer regE processes to high volume manufacturing (Fab10), and work on continuous improvements to manufacturability.
• Address specific wafer edge issues (such as bevel defects, uniformity issues), working with Fab10N team and with key business partners on tool choices for manufacturing, evaluations etc., as applicable.
• Focus on understanding and improving regE process margins required for meeting the mature yield goal for 3D NAND parts.
• Initiate and manage experiments to widen regE process margins as well as to test out manufacturability of next node solutions
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Define and leads complex, multi-functional projects of critical importance to Micron, helps to define strategic direction.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Masters degree or higher in Materials Science, Chemical Engineering or Physics.
• Familiarity with regE process developments and yield improvements.
• Understanding of various integration and structural impacts and constraints related to wafer edge.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 4-6 months at a stretch to work on technology development.
• Suitable candidates may be considered for Expat posting to Singapore from overseas locations.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally.
• Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.
  
  Requirements
• Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry are welcomed to apply.
• A deep understanding of chemistry, chemical kinetics, thermodynamics and mass transport
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE) Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 2-4 months at a stretch to work on technology development.

Responsibilities

• Process module ownership involving Chemical Mechanical Planarization (CMP) process characterization and advanced process development for 3D NAND and beyond.
• Work with process development engineers in Singapore and Boise, US TD site and vendors to develop processes that meet integration requirements for next-generation 3-D NAND nodes.
• Transfer CMP processes to high volume manufacturing (Fab10N), and work on continuous improvements to manufacturability.
• Address process issues working with Fab10N team and with key business partners on tool choices for manufacturing, evaluations etc., as applicable.
• Focus on understanding and improving the process margins required for meeting the mature yield goal for 3D NAND parts.
• Advanced 3D NAND CMP process development will include performing fundamental research, consumables development, and hardware evaluation, as well as testing processes for novel applications.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Define and leads complex, multi-functional projects of critical importance to Micron, helps to define strategic direction.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Masters Degree or higher in Materials Science, Chemical Engineering or Physics
• Hands-on experience in leading edge CMP polishing equipment preferred.
• Familiarity with CMP equipment operation, optical metrology, profilometry, polishing slurries, conditioners, and polishing pads.
• In-depth understanding of polishing mechanisms for dielectric and metal CMP.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 4-6 months at a stretch to work on technology development.
• Suitable candidates may be considered for Expat posting to Singapore from overseas locations.

You are responsible for, but are not limited to, the following:

• Develop and optimize lithography processes to meet yield and quality requirements of advanced Replacement Gate 3D NAND parts
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing photolithography team on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Collaborate with Boise R&D peers on technology adaptation and cost optimization towards upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Identify process simplification opportunities and drive multi-functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Provide advice and counsel to management on significant technical issues. Lead and initiate ground breaking projects through patents/technical papers.
• Communicate and collaborate with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a requirement.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough

You should possess

• Masters/PhD in Electrical & Electronics, Chemical, Mechanical, Materials Engineering.
• Strong aptitude for research and development and ability to create production-worthy technologies.
• Ability to develop and maintain relations with multi-functional teams and vendors.
• Strong communication skills (written, verbal and presentation).
• Highly motivated and adaptable to demanding, dynamic and rapidly changing work environment; flexibility to work for extended hours, as required.
• Ability to travel to US R&D site for few months to engage in collaborative R&D work.