JOB SUMMARY:

Understanding of membrane fouling, scaling, cleaning, antiscalant dosage are crucial for a steady operation of membrane processes like ultrafiltration, nanofiltration, reverse osmosis etc. Candidate will be performing experiments towards development of anti-scaling agents to counter CaCO3, CaSO4, CaF2 and SiO2 scaling. This will require evaluating several chemistry formulations and validating their performance with static/dynamic tests (membrane hydrodynamic studies).

ESSENTIAL DUTIES & RESPONSIBILITIES:

· Design of experiment:

o Evaluate the efficacy of developed formulations/competitor products for various scales following lab protocols.

o Plan antiscalant experiments using membrane flow-cell (with synthetic and real process water solutions).

· Performing the experiment:

o Build the setup necessary for the experiment.

o Carry out the experiment with good lab practices.

· Data analysis:

o Identify patterns and/or correlations from the experiment.

o Analyze the data obtained and provide recommendations for improvements or next phase of testing.

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Technical background especially in Chemistry/Chemical Engineering/Environmental Engineering. (Polytechnic or University students)

• Experience in water chemistry or water testing would be a plus.

JOB SPECIFICS:

• Ability to work with high energy in a start-up-based environment and multitask, if required.

• Exceptional communication and presentation skills to convey ideals and technical information effectively across an entire range of audiences.

• Curiosity and strong drive to improve status-quo while working in a semi-autonomous environment.

Responsibilities:

• Perform in process quality check and physical test on in-process materials & finished products
• Prepare Sampling of Intermediate products and finished products and collected send to QC lab for testing
• Perform quality check on Packaging material and physical testing.
• Maintain retention sample for all production batches.
• Housekeeping of In-process laboratory equipment and retention sample.

Requirements:

• ITE / A Level or equivalent of related field
• Able to perform independently in a fast paced environment
• Able to perform multi-task as assigned by superior
• Fresher welcomed
• Willing to do OT
• 1 or 2 years hands on experience in related field will be advantageous

Job Description:

• Read and follow lab procedures.
• Perform inspection (visual & functional) according to Receiving Inspection procedure.
• Perform manual (ASIC) chip serialization per lot/wafer.
• Perform ASIC testing and screening, PCBA product reconfiguration, labelling & packaging based on the specifications or customer requirements.
• Collect test data & perform (ASIC) chips verification for each passed unit.
• Prepare FAI to be sent to customer for final buy-off.
• Perform system transaction.
• Additional duties and responsibilities as assigned.

Job Requirement:

• Basic computer knowledge including experience with Microsoft Excel & Word.
• Capable of lifting 10-16kg cartons of product.
• Able to read and follow company and lab Quality & Environmental procedures.

Temporary Lab Intern - European MNC

5 - 7 months

$10 per hour

5 days work week

Mon-Fri, 8.30am -5.30pm

Location: Gul Circle

Job Scope:

Responsible for day-to-day operations and upkeep of laboratories

Provide technical support to the engineer team

Prepares engineering reports by collecting, analyzing, and summarizing data and trends

Sample preparation / Material testing

Conduct laboratory experiments and measurements

Any other Ad-hoc tasks

Fresh school leavers welcomed

Job Description:

• Manage and supervise all activities related to laboratory testing, which includes maintaining laboratory equipment performance, developing operations, quality, and troubleshooting procedures
• Ensuring staff compliance; certifying instrument performance; arranging equipment replacement, service, and repair
• Capable of conducting laboratory tests, interpreting test data and preparing reports and summaries, which includes training and mentoring of lab staff, so that to be competent and comply with industry standards and safety regulations for handling and disposing of test samples
• Manage and supervise all activities related to any research-related activities as may be assigned by manager
• Laboratory technician may also assist as site technician when laboratory work is slow
• Perform basic geotechnical/soil laboratory testing based on standard methods
• Visually classifying soil samples, preparing samples and performing water content, particle-size distribution, Atterberg limits and compaction tests, etc.
• Other ad-hoc duties as assigned

Requirement:

• Bachelor's Degree in Civil Engineering / Geology or other related engineering/science field
• Minimum 2 years of working experience in related field.
• Good written and communication skills.
• Knowledge and proficiency in MS Office
• Singaporeans and PR only

You may send your resume / CV to email address directly: [email protected]

Job Description – Service Technician

We are looking for a Service Technician in maintaining and managing system hardware and networks at customer site located over Singapore island to meet the contractual Service Level Agreement (SLA). The Service Technician shall report directly to the Service Engineer/Maintenance Lead (Reporting Officer (RO)) and Maintenance Manager (Approving Officer (AO)). Hiring shall be 1 year services contract via agent arrangement with option to extend or convert to direct outsource or permanent hiring.

Responsibilities

· Assist the RO in providing Preventive Maintenance (PM) and Corrective Maintenance (CM) tasks.

· Provide update and feedback on PM & CM work including maintenance documentation such as PM & CM checklist and status update to RO for maintenance report consolidation and generation to AO for review and final release to customer.

· Attend to and conduct on-site CM to faults reported/raised by customer on an ad-hoc basis including I-level & D-level testing and troubleshooting on equipment.

· Perform on-site PM to system equipment based on planned scheduled including O-level testing and sensors calibration to ensure optimal operational performance.

· Work with OEM on fault findings on-site and off-site including D-level components repair by sub-contractor

· Convey updates to RO on maintenance tasks progress.

· Review with RO and AO on maintenance processes and resources etc. for maintenance improvement.

• Perform any other related duties as assigned by RO/AO.

Requirements

· Holding recognised Professional Certificate such as Nitec/ Higher Nitec/ Diploma in Electronics/ Electrical/ Mechanical /Mechatronics/ Aerospace Engineering or equivalent from recognised institution; or at least 3-years working experiences in above mentioned engineering fields.

· Both local and foreigner as well as fresh graduate would also be considered.

· Advantage if have some knowledge and experience working with sensor, control, automation, and Information Technology (IT) system troubleshooting

· Resourcefulness and logical in problem-solving aptitude.

· Able to travel and work under non-conducive environment including site located at offshore island, buoys and in high security areas such as military base, and airport etc

· Ability to work as a team and occasionally independently.

· Ability to conduct on the job risk assessment and provide advisory to team member, RO and AO.

· Preferably holding a Class 3 driving license and familiar with Environmental, Health and Safety (EHS).

· Self-motivated, self-discipline and a service mindset with commitment and willingness to learn.

· Able to start work immediately or within a short notice is an advantage

Degree/Diploma in O&M TECHNICIAN or related fields

Must have a minimum Two (2) years of work experience in the operation & maintenance in a water plant.

Responsibilities

Operation & maintenance of Greasy waste Plant at Jurong Water Reclamation Plant

Operation & maintenance, Reporting & Documentation, Safety & Compliance

Core Responsibility

· Install, repair, adjust, and maintain small electric or pneumatic control systems used for building. This includes heating, ventilation, air conditioning, and refrigeration systems and equipment.

· Conduct ongoing maintenance on building HVAC equipment to ensure proper operation of equipment and compliance with all applicable codes, regulations, and work safety.

· Troubleshoot equipment failures and determine the best course of action for equipment modifications.

· Use existing procedures to solve straightforward problems while having a limited opportunity to exercise discretion.

· Standby purposes on-site to be the first response for any incident.

· Routine checks on equipment to ensure proper functionality.

· To identify and raise to the Engineer if there is any faulty equipment.

· Be the hands-on person to carry out S&M / Repair

· Monitor chiller plant performance (kW/RT)

· Assist Engineer to carry out any works to optimize and maintain chiller plant performance.

· Ensure Service Reports for periodic S&M is properly documented and stored.

· Attend to any complaints by Customers

Requirement

· High School Diploma, GED, or trade school diploma with 3-5 years of job-related experience. In lieu of a diploma, a combination of experience and education will be considered.

· Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more.

· Ability to follow basic work routines and standards in the application of work.

Communication skills to exchange straightforward information

Royal IHC is currently recruiting a MARINE MECHANICAL ENGINEERING TECHNICIAN for our Singapore office.

Roles & Responsibilities:

• Maintenance and Repair: Perform routine maintenance and repairs on dredging equipment, including pumps and hydraulic systems, ensuring optimal performance and minimal downtime.
• Assembly and Disassembly: Assist in the assembly and disassembly of dredger components, adhering to safety and quality standards to ensure efficient operations.
• Troubleshooting and Diagnostics: Conduct thorough troubleshooting and diagnostic assessments on various dredger systems to identify and resolve mechanical issues promptly.
• Collaboration: Work closely with engineers and operators to develop and implement effective maintenance schedules and procedures.
• Workshop Maintenance: Maintain a clean and organized workshop environment, ensuring all tools and equipment are in proper working condition and readily available. Ensure the accuracy of the inventory stored in the workshop. Conduct safety inspections and ensure all maintenance activities comply with safety standards and regulations.
• Procurement Support: Support the procurement of spare parts and materials, maintaining inventory records and ensuring timely availability for repairs. Maintain accurate records of inventory and procurement activities.
• Documentation: Accurately document maintenance activities and repairs in accordance with company protocols and regulatory requirements.

Job Requirements:

• Proven Mi. 5 years of experience in marine mechanical engineering or Marine-Shipyard field.
• Strong troubleshooting and diagnostic skills.
• Ability to work collaboratively in a team environment.
• Excellent organizational and documentation skills.
• Positive mindset with a proactive, “sure I’ll get that done” attitude.

What We Offer:

• A dynamic and supportive work environment where your contributions matter.
• Opportunities for professional growth and development.
• Competitive salary and benefits package.

Job Scope:

• Perform routine repair and maintenance.
• Perform servicing and troubleshooting.
• Perform and assist in installation.
• Assist in ensuring timely execution of routinely scheduled maintenance.
• Conducting troubleshooting, fault diagnosis amd failure analysia to determine root causes of failture.

Requirements:

• Able to work in fast pace enviroement and self-independent
• Min N level/O level
• Min. 2 years of experience
• 6 working days

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. There will be opportunities to acquire advanced CAD/CAM skills and equipment operations through involvement in industry and competitively funded projects related to remanufacturing process technologies. The roles and responsibilities include the following areas:

-Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.

-Tracking and managing lab resource utilization, procurement, and delivery.

-Storage space management and optimization.

-Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

-Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

-Assist in scheduling equipment utilization and procurement for project consumables.

-Assist in lab equipment operation, collection of process data and analysis of results.

-Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

-Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Detailed Job requirements:

• Polytechnic/ Technical Diploma in Engineering
• 1-2 years of experience working in a lab is preferred.
• Experience with engineering CAD/CAM software such as NX UniGraphics, SolidWorks, AutoCAD will be advantageous.
• Strong attention to detail.
• Excellent verbal and written communication skills.
• Proficient in MS office.
• Ability to learn and adapt new technologies to stay relevant.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. There will be opportunities to acquire advanced CAD/CAM skills and equipment operations through involvement in industry and competitively funded projects related to remanufacturing process technologies. The roles and responsibilities include the following areas:

-Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.

-Tracking and managing lab resource utilization, procurement, and delivery.

-Storage space management and optimization.

-Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

-Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

-Assist in scheduling equipment utilization and procurement for project consumables.

-Assist in lab equipment operation, collection of process data and analysis of results.

-Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

-Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Detailed Job requirements:

• Polytechnic/ Technical Diploma in Engineering
• 1-2 years of experience working in a lab is preferred.
• Experience with engineering CAD/CAM software such as NX UniGraphics, SolidWorks, AutoCAD will be advantageous.
• Strong attention to detail.
• Excellent verbal and written communication skills.
• Proficient in MS office.
• Ability to learn and adapt new technologies to stay relevant.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Candidate must have minimum 3 year exprience in lift industrie.

Candidate must stay at the Dormitory with Existing Employees

and also need to follow transportion company Vahicle.

Candidate Some time need to work in nightshift.

Candidate need to work a day muiltiple area.

Candidate must need to take care the tools.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include operation of high-power lasers for cleaning related experiments, metal and composite sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. The roles and responsibilities include the following areas:

· Perform high-power laser material processing using robotics, CNC and hand-held systems on-site of ARTC and occasional visit to customer sites.

· Perform material testing, sample preparation, microstructure & defects analysis in fabricated coupons and parts.

· Tracking and managing lab resource utilization, procurement, and delivery.

· Storage space management and optimization.

· Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

· Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

· Assist in scheduling equipment utilization and procurement for project consumables.

· Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

· Identify and recommend improvement measurements to ensuring high quality in lab safety and 8S standards

Detailed Job requirements:

· Polytechnic/ Technical Diploma in Engineering

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Experience with high-power laser is preferred.

· 2 years of experience working in a lab is preferred.

· Strong attention to detail.

· Proficient in MS office.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include operation of high-power lasers for cleaning related experiments, metal and composite sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. The roles and responsibilities include the following areas:

· Perform high-power laser material processing using robotics, CNC and hand-held systems on-site of ARTC and occasional visit to customer sites.

· Perform material testing, sample preparation, microstructure & defects analysis in fabricated coupons and parts.

· Tracking and managing lab resource utilization, procurement, and delivery.

· Storage space management and optimization.

· Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

· Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

· Assist in scheduling equipment utilization and procurement for project consumables.

· Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

· Identify and recommend improvement measurements to ensuring high quality in lab safety and 8S standards

Detailed Job requirements:

· Polytechnic/ Technical Diploma in Engineering

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Experience with high-power laser is preferred.

· 1-2 years of experience working in a lab is preferred.

· Strong attention to detail.

· Proficient in MS office.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Associate Technician, Operations (2 years contract)

THE OPPORTUNITY

Our Manufacturing Operations teams are the people that make our products. We work in the manufacturing plants with a “Safety First, Quality Always” mindset striving for continuous improvement. We work in the local plant connected to our global manufacturing network to ensure the highest quality of raw materials, intermediates, and finished products.

WHAT YOU WILL DO

As a technician, you will join one of the teams who manufacture our medicines. The environment that these teams work in is a clean room environment doing filling of sterile vials. Each team is approximately 10 people working on a 24x7 shift pattern. We are proud of being a diverse organisation with an even split of genders at a technician level within Biotech.

Expectations

Achieve competency in the following as Associate Technician (O1):

Qualified in at least 1 of 4 Operating Modules

• Parts Prep/ Autoclave
• Formulation
• Filling
• AVIM/ Inspection

Proficient in 1 of 3 systems (Perform independently)

• MES
• SAP
• GLIMS

Proficient in all support activities (Perform independently)

• Cleaning & Sanitization
• EM Sampling
• Material Management

Apply MPS

• Standardized Work
• Problem Solving/ On-Point Problem Solving

Routine Operation

• Setup and operate pharmaceutical production equipment including high-speed filling lines for sterile injectables, robotic technology, compounding panels and automatic CIP/SIP.
• Dispense, formulate and fill active biological product batches as required to meet the production schedule.
• Perform routine QC sampling and in-process testing of the product at various stages throughout manufacturing i.e bioburden sampling, water sampling.
• Microbial sampling and swabbing of room and equipment.
• Perform cleaning and upkeep of the Grade C & D cleanrooms and production equipment.
• Perform filter integrity testing using an automatic filter integrity test unit.
• Preparation of equipment including loading and starting of sterilisation cycles in autoclaves.
• Complete batch documentation as required including raising of exceptions in a DI compliant manner.
• Perform in-process sampling on semi-finished drug products.
• Perform visual inspection, labeling and packaging on semi-finished drug products.
• Perform all tasks in accordance with the standard operating procedures and maintain strict compliance to GMP at all times.

Event, Atypical Investigations

• Report QN/deviations if any.
• Participate in SHE, Business Compliance, cGMP and compliance matters, where applicable.
• Responsible to escalate Operations issues to Lead Tech or Shift Manager when required.

Continuous Improvement

• Responsible to participant in Kaizen events in pharm operations in accordance with Kaizen plans when assigned.

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• A Diploma or Technical School graduate with background in operations and maintenance or any relevant studies
• Must be willing to work in 24x7 rotating shift pattern.
• Min 2 -8 years of working experience preferably in manufacturing industry preferred depending on the level of the role you are applying for (O1 to O3).
• Good understanding of safety procedures/practices.
• Good command of English to be able to read and understand procedures, write simple comments, and communicate with team.
• Ability to work collaboratively in a team environment.

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Pharmaceutical Manufacturing.
• A state-of-the-art facility that delivers solution to its customers world-wide
• Highly engaging team that aims to innovate the future.

Our Manufacturing & Supply Division is committed to be the most trusted supplier of biopharmaceuticals worldwide. Our facilities, along with our external contractors, suppliers, and partners, create an interdependent global manufacturing network that’s committed to delivering a high quality, reliable supply to customers and patients on time, every time.

Job Description

Prepare and pack high-quality cuts of meats according to customer specifications using company standards and adhering to all safety requirements.

The majority of time will be spent operating processing equipment.

Operation of Meat Processing Equipment

Pack, trim, and customize portions of meat products using knives, or other meat production equipment.

Count and stack on tray portions per customer and company specifications

Label portion with a supplied number of product labels

Set up packing and labeling area as required

Perform end-of-day functions

Actively maintain, and merchandise partial cart

Keep the packing area, cutting room, and surrounding area clean and sanitized.

Follow company GMP (Good Manufacturing Practices) to maintain sanitary conditions

Work rotating shift

Physical Requirements

• Lift up to 30 lbs. regularly, including overhead lifting, and up to 60 lbs. occasionally. Push/pull up to 40 lbs. regularly.

• Meet established volume/activity standards.

• Stand or walk 100% of the time.

• Frequent reaching, grasping, and lifting individual stock items below waist level or above shoulder level.

• Frequent bending, kneeling, and squatting.

• Able to handle a variety of substances associated with cleaning materials, packaging materials, and food products.

• Tolerate working in extremely cold temperatures -18 °C – 10 °C

• Ability to use computers, calculators, and communication systems required to perform the job functions.

Kindly send in your full resume with your expected salary & earliest start work date.

We regret that only shortlisted candidates will be notified. Thank You.

Ruby Ng

R1106066

TECHNICIAN X 2 (WORK IN SG)

⌚Working hours: Monday to Friday (9am to 6pm) + Saturday (9am to 2pm)

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

JOBS DESCRIPTION

• Discuss problems with car drivers or vehicle operators to discover faults
• Listen to engines, fit and operate special test equipment, and test-drive vehicles
• Repair or replace worn or faulty parts by removing assemblies such as engines, transmissions, differentials or steering gear; dismantling them and checking parts, referring to manuals as necessary.
• Reassemble, test, clean and adjust repaired or replaced parts or assemblies, using various instruments to make sure they are working properly and putting them back into the vehicle.
• Diagnose, repair and replace engine management and fuel injection components
• Additional duties as assigned by Supervisor.

JOB REQUIREMENTS

• Ability to work with minimum supervision
• Passionate in motor vehicles
• Humble and willing to learn
• Good working attitude
• Preferably with at least 2 years hands-on experience in Automotive Industry
• Possess Certificate in Motor Vehicle Mechanics or Automotive Technology would be an advantage
• Class 3 driving license would be an added advantage.

Send resume and expected salary to: [email protected].

Only selected candidates will be notified.

Job description

Description of duties:

The incumbent will manage the day to day lab tasks which ranges from sampling compounding and other lab tasks to shipping out of the finished samples. Also he/ she would have to ensure the needs of the sampling lab is adequate and manages the replenishment. Maintaining hygiene and ensuring the lab is adhering to the 5S standards is a must.

Education/Experience:

High School diploma or general education degree (GED), or two-years or more related experience and/or training, or equivalent combination of education and experience.

Job Types: Full-time, Permanent

Salary: $3,000.00 - $3,300.00 per month

JOB DESCRIPTIONS:
1) Receive raw material and ensure traceability maintained.

2) Study drawings/specifications and prepare inspection sheet,

3) Study drawing, specification to ensure that machine, fixture, tools and inserts used are suitable.

3) Perform precision machining as and when required.

4) Perform machine check and report its status.

5) Perform precision machining conforming to specified requirements.

6) Perform first piece inspection and record result.

7) Perform in process inspection and record result.

8) Report non- conformance, if any.

9) Upon completion of the job report daily production status.

10) Ensure all parts were properly protected from atmosphere corrosion.

11) Maintain measuring equipment and tool properly.

12) Maintain good house-keeping at all time.

13) Maintain safe and healthy work environment.

14) Ensure daily production record form are correctly submit daily.

15) Direct and coordinate the activities engaged in production or processing of components.

16) Assist plan shop activities as per production schedule and updating the production schedule.

17) Initiate, recommend and provide guidance to improve machining process.

18) Initiage investigation root cause of product non-conformance.

19) Any other duties that is assigned by superior as and when is required.

REQUIREMENTS

1) Interpretation of drawing, Setup Sheets.

2) Experience in operating of CNC Machine/ Turnmill / CNC Milling/ CNC lathe/ Borer.

3) Measurement skill.

4) Handling of company ERP system.

5) Able to direct and coordinate production activities.

6) Able to perform investigation root cause of product non-conformance.

7) Able to train new machinist on machining requirements, tooling and lifting equipment usage.

8) Min 3 years in CNC machining.

Technical coordinators provide basic administrative and light tech support services to assist with a project or the operation of a department. They often handle routine paperwork, data entry, preparing and processing of documents, and responding to general requests for information. They also assist with the creation of spec sheets, promotional collateral, and other materials. They may assist with billing, inventory, and logistical tasks, as well, and often relay information and materials between departments or individuals.

Electrical Technician Duties and Responsibilities

• Conduct tests and assessments of new systems and repairs to ensure quality
• Assemble and install electrical panels, wire harnesses, and other electrical equipment
• Respond quickly to all service requests and efficiently troubleshoot and repair electrical systems
• Communicate estimated timelines for repairs to those impacted
• Install new equipment and wiring to expand infrastructure as needed
• Perform preventative maintenance on a regular schedule
• Log all services and report progress to management
• Utilize and store all equipment properly

Electrical Technician Requirements and Qualifications

• High school diploma or equivalent; associate degree in electrical engineering technology preferred
• Valid electrician license in good standing
• 2+ years of experience working as an electrical technician
• Extensive knowledge of electrical systems, wiring, and all necessary equipment
• Able to read blueprints and technical drawings
• Proficient with manual and power tools
• Familiar with code requirements and company safety regulations

General Overview

This position is part of the Production team performing LNG Terminal operations of loading and unloading of LNG from vessels and re-gasification process of LNG for the natural gas pipeline network supply. The position requires the incumbent to perform fieldwork and operate the DCS. The incumbent will work closely with the marine, technical and maintenance team to perform the operations.

Roles and ResponsibilIties

The primary duties are listed as follows:

• Perform routine field inspections on equipment operating conditions to ensure safe operating limits.
• Perform unloading of chemicals/utilities into receiving tanks.
• Perform jetty operations such as berthing in of vessels, operating marine loading arms and undertake Loading Master role.
• Operate DCS to monitor and control the overall terminal process within the design parameters and to meet customers’ gas nomination requests.
• Maintain comprehensive unit logs with proper data of all activities occurring in the shift and to ensure proper changeover of shift including any follow-up activities requirement.
• Support other production activities in relation to other businesses and services such as vessel cool down, cold energy transfer, LNG Truck Loading etc.
• Perform troubleshooting on equipment and processes when necessary.
• Take corrective action to ensure unit and equipment are operated under safe and optimum conditions. Generate work orders for maintenance work on equipment when necessary.
• Secure and prepare equipment and work sites for maintenance work according to Safe Operating Procedures requirements such as equipment lock-out and tag-out, low tension electrical de-energization etc.
• Perform basic maintenance such as strainer cleaning, flange make up, gas cylinder replacement etc.
• Replenish process chemicals / additives and trigger re-stock when necessary.
• Review and issue permit to work after all safety checklist is completed and ready for maintenance activities.
• Conduct periodic fugitive emission leak detection (hydrocarbon) and execute immediate measures to minimize or eliminate leaks.
• Supervise contractors who are executing the approved works according to the established permit to work system.
• Undertake project related role when assigned; rotation between shift and day work.

The incumbent shall be part of the company’s Emergency Response Team (CERT) and perform any assigned roles and responsibilities such as but not limited to:

• Respond to terminal emergency situations as a first aid specialist or fire fighter or any other assigned roles.
• Participate in prevention and combat of hazardous situations such as loss of primary containment, oil spills and other forms of pollution and situations dangerous to life and property.
• Perform periodic safety check on work sites to ensure safety compliance enforcement such as but not limited to taking periodic gas test for confined space work.
• Perform routine safety check on all safety equipment such as safety showers, eye wash, SCBA (Self-Contained Breathing Apparatus), firefighting equipment etc. to ensure readiness and availability.

Work Experience

• Candidate must have at least 3 years’ experience in oil, petrochemical and refinery plant, utilities and cryogenic processes.
• Previous operations experience of LNG facilities is preferred but transferable skills from other hydrocarbon process or cryogenic product (e.g. LPG) loading and unloading will also be considered.
• Preferably with knowledge of plant instrumentation and control systems and DCS.
• Practical working knowledge of mechanical equipment, heat transfer equipment cryogenic equipment, centrifugal and reciprocating compressors, LNG tanks, fired equipment and flare systems.
• Experience in mechanical systems and process plants desired, knowledge of cryogenics and aspects of the natural gas industry is preferred.
• Experience in process plant safety (e.g. confined space, lock-out and tag-out, working at height, gas testing etc.) and permit to work issuing is preferred.
• Experience in plant commissioning and start-up is preferred.
• In addition, the successful candidate should possess the following personal attributes:

1. Work well in a team and with good listening skill
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments.

Education

• NITEC certificate in Mechanical, Electrical or Chemical Engineering
• Candidates with Diploma in Mechanical, Electrical or Chemical Engineering will have an advantage.