Total 1,367 lab technician job vacancies in Others category in Singapore

Roles & Responsibilities

· Supervision of workers and subcontractors on daily site activities

· Keep track of the site schedule to ensure works are on time

· Compliance to safe work procedures and maintain good house-keeping

· Ensure safety matters on site and quality of completed works

· Assist Project Manager in material and equipment acquisition

· Supervise site electrical installation.

· Confirm progress reports, monitor project activities

. Raise purchase requisition

· Liaise with Project Manager

· Prepare documents for electrical testing

· Rectify and repair electrical issues at site

· Prepare and submit tender quotations

· Submit progress claims, monitor project activities

· Project planning, execute resource management and control

· Co-ordinate with sub-contractors, suppliers and Consultants for Building Construction

Electrical Works

.To be in charge of task allocation, scheduling and worker training

· To ensure all the design/installation detail can be done according to site condition

· Site supervision and highlight to Project Engineer on the installation matter/changes

· Material calculation & Labor cost estimating.

· Liaising with resident technical officer and consultant when necessary

· Ensure workers’ safe work procedure.

· Arrange and monitor work progress

· Monitor project costing to ensure project to be completed within budget and on time delivery

Roles & Responsibilities

.To be in charge of task allocation, scheduling and worker training

· To ensure all the design/installation detail can be done according to site condition

· Site supervision and highlight to Project Engineer on the installation matter/changes

· Material calculation & Labor cost estimating.

· Supervision of workers and subcontractors on daily site activities

· Keep track of the site schedule to ensure works are on time

· Compliance to safe work procedures and maintain good house-keeping

· Ensure safety matters on site and quality of completed works

· Assist Project Manager in material and equipment acquisition

· Supervise site electrical installation.

· Confirm progress reports, monitor project activities

. Raise purchase requisition

· Liaise with Project Manager

· Prepare documents for electrical testing

· Rectify and repair electrical issues at site

· Liaising with resident technical officer and consultant when necessary

· Ensure workers’ safe work procedure.

· Prepare and submit tender quotations

· Submit progress claims, monitor project activities

· Project planning, execute resource management and control

· Co-ordinate with sub-contractors, suppliers and Consultants for Building Construction

Electrical Works

· Arrange and monitor work progress

· Monitor project costing to ensure project to be completed within budget and on time delivery.

Key responsibilities

• To conduct routine checks on building and preventive maintenance of building facilities including electrical, air-conditioning, plumbing and sanitary according to authorities’ legislations industry standards (AS9100, ISO14001, 45001, 50001) and company policies.
• Perform minor hands-on preventive corrective maintenance of Production & Facility system such as air compressor, mechanical and electrical systems.
• To supervise service contractor’s work and to issue work permit and ensure that work is done efficiently and effectively.
• Troubleshoot & rectify technical issues to ensure minimal disruption to operation
• Active participation in continuous improvement, Workplace Safety & Health activities
• Maintain and upkeep the premise which involves day-to-day management and troubleshooting, including cleanliness & waste disposal management
• Any other ad-hoc duties as assigned by manager.

Qualification / Expertise / Skills

• Minimum diploma or equivalent study qualification in building related field (building, Facility Management, Mechanical and Electrical)
• Knowledge in Compliance: ISO14001, 45001, 50001, Workplace Safety & Health Act
• Proficiency in MS Office
• Preferably prior experience in Facility (Aircon, lights, sanitary, ..) & Equipment (diesel engine, compressor, …) maintenance knowledge.
• Physically work at height is required.
• Experience to perform simple electrical hands-on works will be added advantage.
• Class 3 driving license, Forklift/Scissor/boomlift license preferred
• Excellent Analytical and problem solving skill
• Good project planning & decision-making skills
• Good knowledge of contracts, feasibility study and business proposal
• Ability to create simple Engineering drawings/sketches for contractors
• Location : 1800 West Camp Road Seletar Aerospace Singapore 797521.

We regret that only shortlisted candidates will be notified.

Preventive Maintenance Technician- Troubleshoot, repair and maintain food production equipment- Execute emergency breakdown protocols- Assist in resolving downtime issues- Clean equipment and maintain equipment hygiene requirements for production use, after installation and/or repairs- Collate and coordinate maintenance work, at times need to work with contractor- Comply with cleanliness and safety regulations while setting up and maintaining food manufacturing equipment- Able to perform ad-hoc duty when require- Basic electrical and refrigerator knowledge- Prepare maintenance reports/records in relation to the work assignedRequirements- Minimum 1 Year of experience in maintenance work and engineering field, preferable in food manufacturing- “O” leave / NTC3 or NITEC in Mechanical Enginnering- Able to performance Shift- Willing to learn new skills- Positive work attitude

Job description

- Generating new patients from health screenings/talks at established organisations.

- Giving talks and presentations to corporate companies.

- Balancing moderate to high volume patient load with the highest level of patient care

- Providing consultations, exams, prescribing and administering treatment.

- Educate and advise patients on chiropractic care and rehabilitation exercises and techniques to aid long-term recovery.

- Providing treatment progress evaluations

- Overseeing of the clinic.

6 months Contract Part Time Food (Lab) Assistant - 3 Days Per Week

*STARTS IN JUNE*

Salary: $12/hour

Working hours: 8am – 5.30pm (3 days per week) – that 3 days can discuss with Hiring Mgr during interview

Job Scope

• To assist Product Developer in lab trial work incl. raw material batching, processing/cooking, data recording, file keeping
• To support lab maintenance duty (light duty); e.g material (raw/pack) management (receiving, storage, expiry), kitchen device calibration mgt,.
• Maintain Flavour Compliance documents and keep master file up to date
• Sample reception/dispatch
• Contribute to SOP upkeep

Requirement

• Min GCE N/O Level
• Interest in food science field
• No prior experience needed

Interested candidates please forward your resume to [email protected]

Recruit Express Pte Ltd (99C4599)

EA Personnel Name: Fong Hsin Ting Jessica (Jacqueline)

EA Personnel No: R21103226

Recruiter Ref code: #HFT

Mechanical Technician

A Mechanical Technician is responsible for ensuring allotted mechanical maintenance and repair work is carried out safely, effectively and accordingly to procedure and that his supervisor is made aware of all activities, especially where safety is an issue.

A Mechanical Technician is authorized to maintain and repair vessel mechanical equipment and systems.

1) Dismantle Repair and Reassemble Mechanical Equipment.

• Identify potential sources of hazard prior to dismantling.
• Use correct procedures and correct method of dismantling.
• Carry out the correct isolation and disconnection procedure.
• Identified, checked and prepared components.
• Apply appropriate tests and test equipment to ensure reassembly is correct and effective

2) Use of Condition Monitoring on Mechanical Equipment.

• Adjust instruments to meet the operating specification
• Make adjustments with minimum disruption to any ongoing activities and minimum waste of resources.
• Monitor and record what has been carried out in work history or log.

3) Diagnose faults in Mechanical Equipment.

• Respond promptly to problems in line with approved procedures.
• Select appropriate tests and diagnostic procedures and apply them methodically.
• Carry out Visual, Close and Detailed inspections on Mechanical equipment.
• Use the results of inspections to determine the appropriate actions to take.
• Record an accurate and full description in the appropriate document history

4) Monitor and Maintain Pollution Control Measures.

• Unplanned discharges to the environment are identified, halted where possible, and reported according to policy, procedure and regulation.
• Relevant PPE is used to deal with unplanned discharges using company procedures
• Equipment, waste or other materials for disposal are dealt with according to the correct procedure.
• Environmental protection and pollution control are enforced effectively with colleagues, subordinates and subcontractors.

5) Contribute to The Health and Safety of the Working Environment

• Work area within your own responsibility is kept clean and free of hazards.
• Positive action is taken to stop hazards and unsafe behaviours
• Alarms are raised as appropriate and/or acted upon using applied policies and procedures or initiative
• Colleagues and subcontractors are alerted ASAP of any hazards or potentially dangerous changing conditions.
• All potential and actual incidents are reported to the relevant supervisor.

6) Emergency Response

• See Station Bill. Perform emergency response role.
• Demonstrate competence during Emergency Response Drills and training exercises.

Units Of Competence

1. Dismantle and reassemble Mechanical Equipment

2. Monitor and Maintain the condition of Mechanical Equipment

3. Diagnose faults in Mechanical Equipment

4. Monitor and Maintain Pollution Control Measures

5. Contribute to The Health and Safety of the Working Environment

6. Emergency Response Role

7. Provide any additional duties as required by the OIM/Unit Spt. and/or HOD to maintain safe and efficient running of the Unit.

Qualifications and Experience:

• Proven experience and/or qualified to N/SVQ/HNC/HND in Mechanical Engineering or local equivalent

• 3 yrs experience desired with offshore experience preferred.

• Experience and knowledge of hydrocarbon processing systems and utilities.

• Good experience of Permit to Work, Mechanical Isolation Standards and Risk Assessment.

• Medically fit to offshore International standards such as ENG1 or equivalent.

Personal Skill

• Personal: Safety aware, conscientious, flexible, versatile and determined. Positive.
• Leadership: Good levels of written and spoken communication
• Technical: High standard of analytical, diagnostic technical and professional knowledge on rotation equipment, seals, bearings, pneumatic, electro-pneumatic, electro-hydraulic, and hydraulic systems.
• IT: Use Standard Management System ‘Office’ package electronic mail system. Diagnostic software and equipment as required. Maintenance Management System packages.

Responsibilities and Duties

• Troubleshooting, regular testing, and commissioning of all electrical systems and panels.
• Ensure that the electrical panels and systems meet the standards requirements and specifications.
• Installing, commissioning, and testing all electrical systems and panels by coordinating with the shipyard.
• Documenting the electrical panel specifications, wiring and schematic diagrams, and system configurations.
• Performing other ad-hoc duties.Check equipment and operating systems and correct wherever necessary.
• Ensure Electrical operations, standards and controls are maintained at high quality.
• Resolve CCTV, motor, pump, conveyor and hydraulic problems.
• Carry out electrical and system works using hand tools or power tools.
• Check wiring and electric status for danger and faults.
• Fit electrical system and equipment according to project specifications.
• Maintain tools and equipment.
• Perform task in accordance to safety procedures.
• Trace faults in system and ad-hoc duties as assigned.

• Inspecting, analyzing, and troubleshooting systems and equipment.
• Reading repair manuals and liaising with other professionals.
• Running tests and interpreting results to make effective recommendations.
• Writing up reports, safety regulations, and preventative maintenance plans.
• Sourcing replacement parts.
• Negotiating with suppliers and clients.
• Repairing or replacing faulty equipment.
• Fabricating any components required.
• Providing time and material cost estimates before starting a job.
• Keeping abreast of advancements in your field and attending

• Perform routine and non-routine analysis of raw materials, intermediates, and finished products using Rubber, Solid, Slurry, and Gas Chromatography techniques to ensure adherence to quality specifications
• Operate and maintain laboratory instruments and equipment, including chromatographs, spectrophotometers, balances, and other analytical instruments.
• Record and interpret test results accurately, maintaining detailed and organized documentation of laboratory activities and data.
• Assist in the development and validation of new analytical methods or modification of existing methods to improve efficiency and accuracy.
• Assist in troubleshoot instrument or method-related issues, working collaboratively with laboratory staff and technical support to resolve problems.

Responsibilities

• Refurbish aircraft cabin interior components
• Perform visual and dimensional inspection of aircraft cabin interior.
• Perform receiving inspection, disassembly, cleaning, repair
• Perform scheduled maintenance and housekeeping tasks
• Ability to handle basic tools and equipment
• Adherence to Safety Standards in workshop environment

Requirements

• Min Secondary Education.
• Team player with a positive attitude.
• Relevant experience in the aerospace industry preferred

Responsibilities:

• Technical support for Protection Projects/Services
• Handling testing and commissioning activities at site
• Perform wiring check in workshop and at site
• Project Management

Requirements:

Diploma/Degree in Electrical/Electronic Engineering from a recognised Polytechnic/University

• Experience in site testing and commissioning preferred but not necessary
• Our benefits and compensation for permanent position are as follows
• Salary for experience candidates will be considered based on the years of experience and our internal salary structure
• Strong analytical skills.
• Good technical and hardware skills.
• Do-it-yourself interest and capabilities.
• Exemplary or seeing projects to the end.
• Good team spirit.
• Experience in engineering is required for this position.
• Good working attitudeKnowledge of C/C++ is a plus
• Outstanding analytical and problem-solving skills

Job description :

- Install / troubleshooting router,modems tv box in residential premises

Requirement :

- Full timer

- Must have class 3/3A Licence (own vechicle prefferred)

- Paid per job avg $20 with daily work load of (12site -18site daily)

- Able to commit weekend and PH work day, (5.5 work day)

WA 91817070 or Email : [email protected]

Project Samples Dispatch

• To attend day to day project samples submissions by following up and coordinating with R&D Team in ensuring the samples are submitted on time.
• To ensure project samples received from the R&D Team are forwarded to Courier Team on time for invoice, packing and shipping.
• To measure Flash Point for all new creations are measured and maintain data in FISS for SDS arrangement.

Coordination with QC Department and FA Department

• To coordinate with FA Team /QC Team on the publishing of SDS and GHS information for daily project samples dispatch.
• To attend request from QC Department for reference samples.

Support Affiliates Library Request & Stock Replenishment Request

• To attend Affiliates Library Request and Stock Replenishment Request and ensure samples are submitted on time.
• To maintain and manage the Inventory for Library Flavors. Request for compounding when stock level is low.
• To attend ad hoc request from SCM Department.

Laboratory Activities and others

• Generate GHS Label and re packing of Flavors.
• Returning of flavor back to original storage location after re packing.
• Maintain and ensure a clean and safe working environment in Sample Lab
• Clean lab equipment, glassware, and apparatus after use.
• To carry any additional job-related duties, this may be assigned from time to time, when and where necessary.
• Implement and conforms to all established environmental management system.
• Support the implemented environmental management system.
• Comply with all applicable procedures and legal and other requirements.

Requirements:

• Basic laboratory knowledge
• Able to read, speak, write basic English
• Good communication and interpersonal skill
• Good organizing skill
• Good time management
• Basic knowledge of MS office
• At least 1-2 years of working experience

To installation, testing, and troubleshooting of instrumentation auto-monitoring systemsTo troubleshoot, repair, and resolve technical issues pertaining to electrical works Any other duties as assigned by Manager.Diploma / Nitec qualifications in Electrical/Electronics/Computer Engineering Knowledge on data communication and automation systems for instrumentation monitoringAt least 1-year relevant experienceAbility to read and understand electrical drawingsAble to multi-task and troubleshoot instruments issues that may arise

About the role:

Maintain, service, testing, commissioning, troubleshooting, repair and clean Carrier owned HVAC equipment and related products in the workshop and various sites throughout Singapore and across Asia when required. This includes air-cooled and water-cooled systems from 10 RT to 600 RT; various sizes of air conditioners, pumps, air handlers, spot coolers.

Key Responsibilities:

As a Service Technician, you’ll be responsible for:

• Maintain,service, testing, commissioning, troubleshooting, repair and clean Carrier owned HVAC equipment and related products in the workshop and various sites Singapore and This includes air-cooled and water-cooled systems from 10 RT to 600 RT; various sizes of air conditioners, pumps, air handlers, spot coolers.
• Ensure all PPE is worn appropriately as work is performed in a variety of environmental conditions with exposure to outdoor temperature variations, noise, vibrations, gas or fumes, grease, cleaning solvents, degreasing agents, machinery and its moving parts, odors, and dust particles.
• Maintain accurate records for orders and inventory counts.
• Use power tools, hand tools, and other mechanical equipment.
• Communicate in a professional manner with co-employees, subcontractors, and customers.
• Perform other duties as needed, including general maintenance, cleaning, lifting, organizing, and general inventory counts.

Requirements:

We are looking for people who are good in chiller maintenance and technical servicing. If this is you, get in touch.

As a minimum you must have:

• Nitec, Diploma or Equivalent in Mechanical/Electrical/Electronic Engineering with 3 Years of Commercial HVAC experience.
• HVAC technical certification or HVAC equivalent
• Proficiency in servicing, troubleshooting, repair and cleaning HVAC equipment and related products.
• Refrigerant Handling license, SIC for Construction, Shipyard, Process Plant or training or experience in EHS & Risk Assessment is an added advantage.

• Ensure the daily good functioning of each refuse collection in the Fleet.
• Ensure the daily cleaning and sanitization of each refuse collection truck and equipment in the fleet.
• Repair malfunctioning vehicular parts, refuse collection compactors and all technical tools, equipment used in operations.
• Trouble shoot and resolve technical issues and liaise with vendors for very complex ones.
• Responsible for managing and keeping account of all operational assets of ALBA WH and ensure fleet availability to meet all requests by scheduling and forecasting operational needs.
• Respond immediately to equipment's/REL/Chassis breakdowns and engage concern service providers and follow up and regular checking the trucks every day before and after operations to make sure for day-to-day operations.
• Maintain professional external relationships that meet company core values such as Government agencies NEA & PUB, CMP Contractors & Insurance Companies. Proactively establish and maintain effective working team relationships with all departments such as HR, Finance, CS, Operations, Sales.
• Manage the fleet database, handling accidents claim process with Insurance team and repair agency, LTA inspection, SAC inspection, GWC license renewal.
• Maintain and monitor tyre management, Facility management (Building structure maintenance, plumbing, washing bay, etc.), Bins inventory management, Post chemical management (paints, chemicals, all kind of lubricants such as engine oil, coolant AdBlue, etc.), consumables items and sludge water collection arrangements and monitoring on daily basis.
• · Maintain and monitor Fuel Management system. Streamline, monitor fuel purchase system with assistance of Fuel Cards for all vehicles and drivers to tally with diesel consumption report.
• · Maintain and monitor Contractor management to ensure ALBA WH assets are good in condition and maintain proper relationships with suppliers to ensure contractual commitments are met and quality of work done by the contractor.
• Ensure strict vehicle, equipment servicing and maintenance times to minimize downtime, maintain schedules and compliance to all policies, procedures, Standard Operating Procedures (SOP), with recommendations for action and continuous improvement.
• Collaborate with different vendors to understand material purchase, sourcing contracts, bidding and to continuously innovate and bring new technologies relevant to the waste collection business.

Pre-requisites:

• Possess a valid class 4 driving licence
• Willing to work on weekends and public holidays upon rotation
• Hands-on with ability to handle simple IT tools

Job Resposibilities ( 1 year contract for this position)

• Performing lab-scale and pilot-level compounding of new polymer / filler systems.
• Ÿ Performing injection moulding to prepare the test specimen for plastic testing.
• Ÿ To conduct polymeric material testing.
• Ÿ To maintain and upkeep test data, injection moulding process parameter, and all related documents.
• Ÿ Ensures that lab machinery is operated following established processing, quality, safety, and housekeeping procedures.
• Ÿ Cleans and prepares machinery for efficient changeovers and subsequent compounding & injection moulding process.
• Ÿ To conduct polymeric material testing.
• Ÿ To maintain and upkeep test data, injection moulding process parameter, and all related documents.
• Ÿ Trouble-shoots processing problems to ensure production of quality products.
• Ÿ Keep complete and accurate of process records.
• Ÿ Assists routine maintenance of machinery & auxiliary equipment.
• Ÿ Maintains surrounding work area according to established housekeeping standards.
• Ÿ Complies with established safety policies and procedures.
• Ÿ Any other responsibilities as and when assign by your superior due to changes in organization or business direction.
• Ÿ Undertake task/project assigned to achieve Organisational objectives.

Job Requirements

• Diploma in Science or Engineering.
• Ability to work independently in laboratory with minimum supervision.
• Good team player and willing to collaborate with different stakeholders to achieve common goals
• Able to work under fast-paced environment.
• Ability to prioritize tasks based on urgency
• Fresh graduate is welcomed

The Electrical technician will exhibit exemplary safety and technical competence in all matters pertaining to electrical maintenance works on around the vessel. He is responsible for ensuring that he maintains competence to carry out allotted tasks.

Responsibilities & Standards

1. Maintain and adjust the condition of electrical assets: Electrical Systems, Equipment, UPS Batteries, Generators Switchboards, Motors, Wiring, Portable tools, etc

· Comply with relevant authorisation procedures, safe working practices and specific instructions.

· Complete maintenance in an agreed timescale, using safe and appropriate methods and agreed procedures.

· Ensure resources and spares are planned for and used cost effectively.

· Ensure the correct, current operating requirements are available for reference.

· Ensure any assets which have been maintained or had parameters adjusted still comply with specified operating requirements with minimum disruption and with the specified methods, tools and materials.

· Monitor and record any maintenance or adjustments accurately in work history in MMS.

2) Monitor And Assess The Performance And Condition Of Electrical Assets

· Obtain information or parameters from reliable sources. (Inspection ports, connections, vendor documentary information, instrument readings, diagnostic equipment.) using approved methods

· Use monitoring equipment or procedures correctly to assess the condition of electrical assets

· Ensure monitoring and checks are carried out in line with specified MMS timescales and schedules.

· Record and communicate monitored outcomes accurately and in timely fashion to raise the effectiveness of MMS.

· Compare current performance with previous assessments and take action where differences must be addressed.

3) Diagnose Faults in Electrical Assets

· Respond promptly to problems in line with approved procedures.

· Select appropriate tests and diagnostic procedures and apply them methodically.

· Determine the cause, nature and extent of problems in the performance and condition of electrical systems or assets.

· Use the results of inspections to determine the appropriate actions to take.

· Record an accurate and full description in the appropriate document history

4) Monitor and Maintain Pollution Control Measures.

· Sample and check that controlled process discharges from area of responsibility to the environment are within prescribed limits

· Identify and halt unplanned discharges where possible, and reported immediately according to policy, procedure and regulation.

· Equipment, waste or other materials for disposal are dealt with according to the correct procedure

· Ensure resources such as PPE, materials, tools and spares are accounted and not wasted or used inefficiently

5) Emergency Response

· Carry out Emergency Response Role

· Show competence during drills and exercises

Units of Competence

· See Training Matrix (HSEP Shipboard Manual)

· See Electrical Technician WAM (Vol. 2 Competence System Manuals) See Electrical Competency Manual No: 00.07.10.221

· Provide any additional duties as required by the OIM/Unit Spt. and /or HOD to maintain safe and efficient running of the Unit.

Qualifications and Experience

· Proven experience and qualified to ONC/ HNC, or NVQ Level 3 or recognised equivalent in Electrical Maintenance Engineering

· Minimum 5 yrs experience preferred, with 2 years offshore petrochemical experience desired

· Good knowledge of PTW, Electrical Isolation Standards, Risk Assessment and Man Management, Power Management System, Generation on LV

· COMP ex E'x' Course.

· Preferred courses: HV/LV Protection and HVLV Switching.

· Medically fit to offshore International standards such as ENG1 or equivalent.

Personal Skill

• Personal: Exemplary awareness of safety issues. Conscientious, flexible, versatile and determined.
• Leadership: Able to assist with operation of Electrical Power Generation and distribution systems. Good levels of written and spoken communication. Positive and assertive.
• Technical: High standard of analytical, diagnostic technical and professional knowledge on electrical systems, components and procedures.
• IT: Use Standard Management System ‘Office’ package electronic mail system and diagnostic software and equipment as required.

Roles & Responsibilities:

• Set up and manage the clinical laboratory with MOH license and other licenses such as College of American Pathologists (CAP), fire safety, etc.

· Carry out day-to-day laboratory operations.

· Establish, implement and maintain laboratory protocols and standard operating procedures (SOPs).

· Carry out validation and monitoring of test procedures and protocols to achieve required precision and accuracy.

· Perform, record and interpret results of quality control procedures.

· Carry out and monitor corrective and preventive action implementations.

· Establish and carry out risk assessment for the laboratory.

· Set up and manage laboratory information management system (LIMS).

· Liaise with partners to carry out laboratory audits and proficiency testing.

· Troubleshoot and resolve laboratory issues.

· Manage laboratory inventory, including procurement of consumables, reagents, equipment, and fixtures.

· Liaise with vendors on the servicing, maintenance and repair of laboratory equipment.

· Ensure upkeep of the laboratory premise.

· Recruit, train and manage clinical laboratory staff.

· Coordinate clinical and research projects with partners and clients.

· Plan and monitor the laboratory operations budget and P&L.

Requirements:

• Degree in Biochemistry, Biomedical Science, Medical Laboratory Technology or related discipline.

· Minimum 5 years of experience in a clinical laboratory setting.

· Experience in setting up laboratory for MOH license or other accreditations.

· Good laboratory and strong analytical skills.

· Able to work independently and complete assigned tasks in a timely manner.

· Meticulous and well-organized.

· Excellent interpersonal and communication skills.

· Highly motivated and willing to learn.

Roles & Responsibilities

· Responsible for the smooth operation and overall performance of all buildings’ services by running shift duty or daily normal duty.

· Carry out daily check and logging of Hotel M & E plant and equipment.

· Ensure PPM Schedule and repair works are carried out accordingly.

· Carry out daily repair & maintenance works assigned by Technical Officer.

· Provide emergency supports to all building services as and when required.

· To implement regular inspections on all services, e.g. the fire alarm and protection systems, chiller system etc.

· Ensure comfort levels in all F&B outlets, office spaces and public areas through physical checks in the area.

· Ensure prioritized attention to maintenance work orders and complaints respecting the department’s standards.

· To assist in ordering any spare parts, ensures speedy completion of jobs that needs to be carried out.

· Provide front-line supports and trouble-shoot in the event of breakdowns.

We invite and welcome suitable candidates to apply for the following position.

SERVICE ENGINEER / TECHNICIAN

Job Responsibilities:

• To provide support for installation, repairs, troubleshooting, and maintenance work on board as well as at the workshop for all electrical and electronic related equipment.

• To handle all technical-related matters independently including the preparation of service reports.

• To consolidate technical data and information for establishing service activities plan and strategy.

• To consolidate and control technical manuals and parts catalogues that are necessary for the service activities.

Requirements:

• Diploma or minimum Higher Nitec in Electrical / Electronics Engineering

• At least 2-3 years of working experience in the related field is required for the position of Service Engineer

• Fresh graduates will be considered for the position of Technician and training will be provided

• Able to work under stress and harsh environment

• Able to work long and odd hours

• Able to communicate and write English

• Good communication skills

• Possesses a valid class 3 driving license will be preferred

• Singaporean / PR preferred

Benefits:

• Profit-sharing scheme

• Attractive bonus

• Long Service Awards

• Good Career & Growth Opportunities

• On-the-job training will be provided

• Friendly Working Environment

An attractive remuneration package commensurate with qualifications and experience will be offered to successful candidates.

Lab Chemist (1-year Contract)

Our client is the renowned manufacturer and supplier of medical products in Singapore. They are committed to enhance the quality of life through constant product innovation and quality enhancement.

Responsibilities:

• To perform analysis of lab samples from in-coming, in-process and finished products.
• To ensure all lab equipment are properly maintained according to requirements.
• To comply and adhere with stringent laboratory safety requirements and quality control procedures.
• To assist in preparation of lab reagents and ensure proper lab inventory management.
• To support lab investigations, CAPA, audits, 5S and product development projects.
• To review and maintain laboratory reports and documents.
• To assist in method validations and instrument qualifications.

Requirements:

• Degree in Applied Chemistry, Material Science, Pharmaceutical Science or equivalent.
• 1-2 years of hands-on experience in performing Gas Chromatograph (GC), Wet Chemistry, UV-Vis, Polarimeter.
• Knowledge of Good Manufacturing Practices (GMP) and Good Documentation Control (GDP).
• Good knowledge of Pharmacopoeia (USP / EP / BP), ISO standards and requirements.
• Experienced in using analytical lab software (SQC/ SPC).
• Hands-on experience in performing lab investigations, audits, and product development.
• Knowledge of lab inventory management, instrument maintenance, 5S and chemical safety requirements.

Other information:

• Able to start work with short notice.

To apply, please visit https://www.gmprecruit.com/ and search for Job Reference: 24171.

To find out more about this opportunity, please contact Patricia Lin @ [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Patricia Lin | Registration No: R22105276

Job Title

Senior Service Technician

Occupation

TECHNICIAN

Job Description & Requirements

Job Description & Requirements

We are looking for a servive technician in long term basis (Two years) with following skills and able to work week end days and puplic holidays.

Acadamic qualifications: Diploma or any degree with two years relevent exprience.

Duties and responcibilits ;

1) Must kows chip lavel service of all smart phones like Apple, Samsung,oppo,Vivo,Honor and realme.

2) Need to know all charging ports and all part replcement onspot ontime also.

3) Must know to solve all software issue and remove user locks,

4) Must know all brand laptop and desktop hardware and software repair

5) Must know all brand tablets repair.

Renumaration :$4000.00 to $7000.00

Working houres: 4pm to 11 pm.

Job Summary

Junior Research Technologist performs laboratory functions in routine research assays. Following company laboratory and safety procedures with minimum supervision.

Role and Responsibilities

• Ensure all Lab Job Ticket assigned are performed accordingly and completed on time.

• Performs assigned tasks in prioritized, logical, and timely manner.

• Tests in accordance with specifications provided.

• Perform all core function/testing required by this position

• Enter test data and conditions into the lab system

Job Requirements:

• Minimum GCE "O" level, NITEC or Diploma. Preferably Diploma in Chemical Engineering / Chemical Process Technology

• 1 year of related work experience.

• Work experience in a Laboratory environment will be preferred.

• Entry level with relevant educational background can apply