Total 4,229 quality control engineer job vacancies in Others category in Singapore

The MedTech Catapult has a dedicated objective of curating and accelerating the development of high potential MedTech projects through an in-house product engineering unit. This productization unit is responsible for supporting the development of technologies through the medical device development cycle to produce full-fledged hardware product systems. The Senior Electrical/Electronic Engineer will report to the Principal Engineer.

Job Responsibilities:

• Support Electrical Electronic engineering efforts for complex medical solution
• To interact closely with engineers from other disciplines to achieve an optimized design within the stipulated project schedule
• PCB design for compact instruments and wearables
• High-performance signal processing
• Design for electrical safety, EMC and medical device compliance
• DFM (Design for manufacturing) including end of line testability and design of production test equipment
• Error and tolerance sensitivity analysis, reliability analysis, reliability testing and reliability test program design
• CAD based electro-mechanical integration, at the component level, board level and assembly level
• Write and review documentations for QMS.
• Interface with external parties (design houses) to communicate product requirements, and subsequent knowledge transfer to build internal capability
• Supplier development
• To support other operational activities of the Programme Office

Requirements:

• Cross discipline embedded firmware engineers with degrees in both electronics and software engineering
• >5 years experience in medical devices (e.g. hardware, connected devices) development
• Experience with CAD software.
• Experience managing QMS and proficient with GMP guidelines and regulations which include managing system verification and validation
• Good collaboration skills, organised and detailed
• Demonstrate strong interpersonal skills and leadership skill

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Responsible in designing and developing new control systems, which can be complex in nature necessitating the expert application of engineering knowledge and control disciplines such as process control, programmable logic controllers (PLC), and supervisory control and data acquisition (SCADA).
• Responsible to prepare, review and approval of drawings, instrument lists, data sheets, elect diagrams, control architecture, logic diagrams, operating procedures
• Responsible to plan and self-monitor daily engineering and design work assignments
• Responsible in controling and monitoring job costs and schedules to meet completion dates, customer technical specifications and internal technical specifications
• Responsible in developing and using engineering standards (electrical, instrument, etc.), procedures and forms for engineering design and production fabrications.
• Responsible in providing engineering advice and support to engineers and Project Managers.
• Responsible in preparing FAT procedure and test Control system
• Responsible in conducting training on plant operation & maintenance.
• Responsible in performing plant start-up & commissioning/ troubleshooting.
• Responsible in representing the company for customer discussions and technical reviews

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5-8 years of relevant experience
• Knowledge of Microsoft Office and AutoCad
• Knowledge of PLC programming experience is a bonus
• Prior experience with SCADA system is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Job Description & Requirements

• Liaise with Clients, Consultants, and Authorities for management of the project
• Must have the experience in Diaphragm wall and pilling
• Perform Civil/Structure engineering design works
• Responsible for on-site technical / engineering / administrative matters
• Involve in project planning, implementation, and close monitoring of projects
• Determine best materials and methods with Professional Engineers
• Liaise with Architects on design and safety of the structure
• Analysis of structural components with engineering software
• Prepare drawings, specifications, and computer models of the structure
• Ad-hoc duties as assigned by the Senior Engineer

Requirements:

• Candidate must possess at least Degree in Civil/Structural Engineering
• Minimum 10 years of LTA experience required
• Required Skill(s): Good communication and interpersonal skills, ability to liaise with all levels of people
• Relevant experience in the design of Buildings, Civil and Infrastructure works
• Preferably with project site co-ordination experience
• Knowledge of engineering software and MS Office

Job Description & Requirements

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices.

Requirements:

• Possesses at least 7 years of experience in design and construction.
• Minimum Degree in Civil Engineering from accredited Universities.
• Experience in MRT & LTA projects
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.

Well versed in Autocad and BIM software is preferred

• Review requirements, specifications and technical design documents to provide timely and meaningful feedback
• Create detailed, comprehensive and well-structured test plans and test cases
• Estimate, prioritize, plan and coordinate testing activities
• Design, develop and execute automation scripts using open source tools
• Identify, record, document thoroughly and track bugs
• Perform thorough regression testing when bugs are resolved
• Develop and apply testing processes for new and existing products to meet client needs
• Liaise with internal teams (e.g. developers and product managers) to identify system requirements
• Monitor debugging process results
• Investigate the causes of non-conforming software and train users to implement

• Review requirements, specifications and technical design documents to provide timely and meaningful feedback
• Create detailed, comprehensive and well-structured test plans and test cases
• Estimate, prioritize, plan and coordinate testing activities
• Design, develop and execute automation scripts using open source tools
• Identify, record, document thoroughly and track bugs
• Perform thorough regression testing when bugs are resolved
• Develop and apply testing processes for new and existing products to meet client needs
• Liaise with internal teams (e.g. developers and product managers) to identify system requirements
• Monitor debugging process results
• Investigate the causes of non-conforming software and train users to implement

Job Description & Requirements

Prepare overall planning and programming works for on-going projects and jobs.

· Coordinate with client’s programmer to ensure smooth operation & planning

· Coordinate with construction team to prepare working programmes

· Prepare 4-week, 3-month, 6-month rolling programmes

· Submit daily, weekly and monthly progress updates and reports

· Coordinate with QS section on progress claims

Requirements:

· Diploma, Degree in Civil Engineering or its equivalent discipline

Support the project team in planning, scheduling and coordinating the civil & structural works (site).

· Manage on-site construction works and documentation

· Assist in overseeing engineering deliverable and multi-disciplinary works in order to meet project quality requirements.

· Ensure that on-site construction works are carried out accordingly to local regulations and requirements and meet project quality requirements.

· Assist in preparing civil and structural designs and contract specifications

· Coordinate work with other disciplines such as civil, architectural, mechanical and electrical.

· Prepare and compile related report

· Planning physical works on site through scheduling works and agreed timelines, sequencing of construction works

· Any other ad-hoc duties assigned

Requirements:

· Minimum 7 years’ civil site experience

· Experience in LTA project will be an added advantage

· Able to work under fast paced environment

· Degree in Civil Engineering

• Ensure the daily good functioning of each refuse collection in the Fleet.
• Ensure the daily cleaning and sanitization of each refuse collection truck and equipment in the fleet.
• Repair malfunctioning vehicular parts, refuse collection compactors and all technical tools, equipment used in operations.
• Trouble shoot and resolve technical issues and liaise with vendors for very complex ones.
• Responsible for managing and keeping account of all operational assets of ALBA WH and ensure fleet availability to meet all requests by scheduling and forecasting operational needs.
• Respond immediately to equipment's/REL/Chassis breakdowns and engage concern service providers and follow up and regular checking the trucks every day before and after operations to make sure for day-to-day operations.
• Ensure strict vehicle, equipment servicing and maintenance times to minimize downtime, maintain schedules and compliance to all policies, procedures, Standard Operating Procedures (SOP), with recommendations for action and continuous improvement.
• Collaborate with different vendors to understand material purchase, sourcing contracts, bidding and to continuously innovate and bring new technologies relevant to the waste collection business.

Pre-requisites:

• Possess a valid class 4 driving licence
• Willing to work on weekends and public holidays upon rotation
• Hands-on with ability to handle simple IT tools

Murex is a global fintech leader in trading, risk management and processing solutions for capital markets.

Operating from our 19 offices, 2700 Murexians from over 60 different nationalities ensure the development, implementation and support of our platform which is used by banks, asset managers, corporations and utilities, across the world.

Join Murex and work on the challenges of an industry at the forefront of innovation and thrive in a people-centric environment.

You’ll be part of one global team where you can learn fast and stay true to yourself.

The Operate team provides Murex customers 24/7 technical support to restore normal operations with minimal impact on clients’ business. Along with incident management, Operate provides problem management and operability feedback to evolve the application, enhance user experience and reduce total cost of ownership for both clients and Murex. In order to support efficiently all types of critical incidents, the team has become highly skilled in collaborating cross functionally and working under pressure while continuously learning new skills/technologies and obtaining transversal application knowledge in a rapid evolving environment.

Role Overview:

The Operate engineer will provide technical support with incident management practices on the Murex platform and Murex production chain while maintaining a high level of quality for both internal and external clients.

Role Responsibilities:

• Provide technical support while maintaining effective working relationships with internal and external clients.
• Analyze and manage incidents and propose solutions according to the Service Level Agreements (SLAs).
• Identify underlying root causes for recurring problems to improve the overall service of the team.
• Identify potential technology enhancements to improve the technical support where possible.
• Contribute to the knowledge database build and update.
• Write and update documentation covering technical aspects of the Murex platform delivered to the clients.
• Write troubleshooting procedures “How to’s” and other in depth technical documentation for internal utilization.
• Share knowledge and expertise with team members and coach newcomers to leverage on technical skills.
• Provide technical support to Murex offices as internal clients relying on other technical experts in Murex (System team, development team, architecture…) in order to enable them to focus on their own core business.

To be successful in the role, you should have:

• Bachelor or Master’s degree in engineering or computer science from a reputable university
• 0-2 years relevant experience in troubleshooting technical issues
• Programming Skills: Java, C (C# a plus)
• DB Skills: SQL (query building and performance analysis), DBA skills for Sybase and Oracle a plus
• Advanced problem solving and decision making skills
• Learning agility and ability to work under pressure in a continuously evolving environment
• Client orientation
• Cross group collaboration and team work
• Drive for excellence

Why be a Murexian

• Join a global market leader with a strong people-first focus
• Be part of a diverse and inclusive team
• Work in an agile environment where you can collaborate with global teams from various expertise

1. Responsible for checking design discrepancies between structural and architectural drawings.

2. Lead final safe inspection on form work reinforcement on form works and reinforcement & lead the site responsibilities to conduct relevant inspection required any inspection required any laws.

3. Provide technical details when necessary.

4. Prepare programme and documents control.

5. Plan, supervise and monitor progress of work and also ensure that quality standards and specification are met.

6. Keep and maintain all process records to comply with company ISO standard & ready for external ISO audit.

7. The applicant shall oversee the day to day running of matters relating to the construction of this project.

8. The applicant shall resolve discrepancies or problems relating to quality of work problem relating to quality of work together with site team and report all progress and incidence promptly.

9. The applicant shall review and discuss construction method and material choice with project manager or assistant project manager.

10. Consultant and specialist work contractors and finalize the most appropriate practical construction method in advance of works.

11. The applicant shall also ensure all consultant / Client instruction are properly documented and disseminate to his subordinates and subcontractors consultants.

12. The applicant shall co-ordinate the works carried out by the project team.

13. The applicant shall ensure that all corrective actions are properly addressed.

14. The applicant shall attend the consultant's/ Main contractor's coordination meetings, Safety coordinating committee meeting.

15. The applicant shall assist to project manager to review and approved the Project Hazard/ Environmental Aspect Analysis and all the construction proposals, method statements and submissions.

Job Description & Requirements

Control and monitor work progress and ensure work quality

· Responsible for working closely with project team and resolving technical issue

· Responsible for coordination and liaise with contractors, suppliers and consultants

· Prepare and compile related report

· Attend site meetings

· Any other ad-hoc duties assigned

Requirements:

· Engineering or Civil / Structural Engineering Diploma / Equivalent

· Minimum 5 years’ relevant experience

· Carry out project planning, scheduling, cost control

Job Description & Requirements

• Liaise with Clients, Consultants, and Authorities for management of the project
• Must have the experience in Diaphragm wall and pilling
• Perform Civil/Structure engineering design works
• Responsible for on-site technical / engineering / administrative matters
• Involve in project planning, implementation, and close monitoring of projects
• Determine best materials and methods with Professional Engineers
• Liaise with Architects on design and safety of the structure
• Analysis of structural components with engineering software
• Prepare drawings, specifications, and computer models of the structure
• Ad-hoc duties as assigned by the Senior Engineer

Requirements:

• Candidate must possess at least Degree in Civil/Structural Engineering
• Minimum 15 years of LTA experience required
• Required Skill(s): Good communication and interpersonal skills, ability to liaise with all levels of people
• Relevant experience in the design of Buildings, Civil and Infrastructure works
• Preferably with project site co-ordination experience

Knowledge of engineering software and MS Office

-Assist Project Manager in all aspects of works.

-Understudy and understand the water pipe construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programme.

-Liaise with goverment agencies for the works.

-Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors.

-Handling of technical and engineering problems.

-Prepare report and method statement whenever necessary.

-Manage and control workers and monitor their work closely to keep site safe.

-Supervise ongoing site activities closely.

-Office based for paper work and site visiting for site progression.

Requirement

-Diploma in Civil Engineering

-Able to go site frequently

-Good written and spoken communication skills

-Competent with Microsoft applications (Word, Excel, Power Point etc.)

-Proficient in AUTOCAD

-Possess valid Class 3 driving license / willing to obtain a Driving License

-Able to work under pressure and meet tight deadlines with minimum supervision

-Strong initiative and resourcefulness

-Minimum 2 years working experiences in underground water pipe works

1. JOB DESCRIPTION

Job Description & Requirements

1. Prepare and interpret blueprints, schematic drawings, layouts and other visual aids.

2. Coordinate with various Government agencies and utility authorities for initial site clearance and set up site office

3. Report on daily issues to Project Manager / Construction Manager

4. Plan, schedule and monitor work progress at site

5. Continuously ensure adherence to planned timeliness

6. Maintain and monitor quality controls

7. Prepare and submit all daily and weekly reports as required

8. Ensure safe work procedures and environmental control measures are implemented on work site

9. Prepare method statements and other submission

10. Checking drawings and quantities and ensuring that the calculations are accurate for the work

11. Liaising with consultants and/ subcontractors engaged in the project

12. Supervising and monitoring the site labour force and monitoring the work of subcontractors

13. Overseeing quality control and safety matters on site and ensuring that regulations are adhered to

14. Preparing complete, accurate and timely submittal logs for construction projects based on project drawings and specifications.

15. Accountable for receiving approved submittals from and notifying the Project Manager of potential schedule impact.

16. Assist Project Manager by preparing all necessary backups relating to change requests.

17. Distribute contract documents to subcontractors, including drawings, specifications, and general conditions. Include any accepted alternates or addendums with documents.

18. Schedule all required construction meetings with required personnel subcontractors, architects and owners

19. Prepare correspondence with client, architect, engineers, subcontractors, suppliers, etc. Examples of referenced correspondence include, but not confined to the following items: Schedule of values, project schedule, memos, request for information (RFI), transmittals and submittals.

20. During Construction Phase, proactively manage project to achieve quality, schedule, budget and safety.

21. Utilize and maintain tools: schedule and document management to track and record project performance.

22. Planning work to ensure that materials, machineries, authorities’ approval and sites condition are ready before the work starts.

23. Coordinating with authorities, clients to ensure efficient and timely delivery of assignment

• Interpreting technical designs and drawings.
• Resolving M&E technical issues on site.
• Ensuring M&E works are carried out according to the design plan and project specification.
• Interpreting technical designs and drawings.
• Resolving M&E technical issues on site.
• Prepare Coordinated Services Drawing (CSD), penetration drawing and coordinate with BIM team

Roles & Responsibilities

Responsibilities:

• Lead and manage the mechanical and electrical (M&E) design and engineering activities.
• Oversee the planning, design, and implementation of M&E systems for construction projects.
• Collaborate with architects, consultants, and contractors to ensure integration and coordination of M&E systems with overall project design.
• Review and analyze project specifications, drawings, and technical documents.
• Prepare and present technical proposals and reports to clients and stakeholders.
• Ensure compliance with regulatory requirements and industry standards in the design and construction of M&E systems.
• Manage and monitor project progress, budget, and quality of deliverables.

Requirements:

• Bachelor's degree in Mechanical or Electrical Engineering or related field.
• Minimum 4-6 years of experience in M&E design and engineering, preferably in the construction industry.
• Experience in managing and leading a team of engineers.

• Perform drawing and design work using BIM (Building Information
  Modelling).
• Coordinate and prepare design documentation for Civil & Structural
  engineering projects.
• Performing building/site inspections.
• Attend progress meetings
• Degree in Civil Engineering from local or recognized foreign universities, preferrable to be recognized by Singapore Professional Engineering Board.
• Prior work experience in civil/structural firm environment is advantageous.
• Fresh graduate with good results is encouraged to apply.
• Proficient in AutoCAD and BIM
• Possess Class 3/3A driving license preferred.
• Singaporeans preferred.

Please include the following information in the resume
1. Reasons for leaving current and/or last employment
2. Last drawn and/or current salary in Singapore Dollar
3. Expected salary in Singapore Dollar
4. Date of availability and/or Notice Period
5. A current photograph

Job Description & Requirements

1. Prepare and interpret blueprints, schematic drawings, layouts and other visual aids.

2. Coordinate with various Government agencies and utility authorities for initial site clearance and set up site office

3. Report on daily issues to Project Manager / Construction Manager

4. Plan, schedule and monitor work progress at site

5. Continuously ensure adherence to planned timeliness

6. Maintain and monitor quality controls

7. Prepare and submit all daily and weekly reports as required

8. Ensure safe work procedures and environmental control measures are implemented on work site

9. Prepare method statements and other submission

10. Checking drawings and quantities and ensuring that the calculations are accurate for the work

11. Liaising with consultants and/ subcontractors engaged in the project

12. Supervising and monitoring the site labour force and monitoring the work of subcontractors

13. Overseeing quality control and safety matters on site and ensuring that regulations are adhered to

14. Preparing complete, accurate and timely submittal logs for construction projects based on project drawings and specifications.

15. Accountable for receiving approved submittals from and notifying the Project Manager of potential schedule impact.

16. Assist Project Manager by preparing all necessary backups relating to change requests.

17. Distribute contract documents to subcontractors, including drawings, specifications, and general conditions. Include any accepted alternates or addendums with documents.

18. Schedule all required construction meetings with required personnel subcontractors, architects and owners

19. Prepare correspondence with client, architect, engineers, subcontractors, suppliers, etc. Examples of referenced correspondence include, but not confined to the following items: Schedule of values, project schedule, memos, request for information (RFI), transmittals and submittals.

20. During Construction Phase, proactively manage project to achieve quality, schedule, budget and safety.

21. Utilize and maintain tools: schedule and document management to track and record project performance.

22. Planning work to ensure that materials, machineries, authorities’ approval and sites condition are ready before the work starts.

23. Coordinating with authorities, clients to ensure efficient and timely delivery of assignment

Responsible for the design, development and commissioning support of Pharmaceuticals DCS / PLC systems on site. Key technology will be Siemens. Any exposure to Rockwell and Emerson DeltaV will be of advantage.

Will participate in the development and implementation of Automation solutions in line with S88 standards for the plant.

Thorough understanding of Physical and Procedural Layer design, development and qualification.

Work with automation team to design system architecture, Design Specification, Control Strategies, and library development.

Strong understanding of CSV documentation for Pharma projects

Supporting manufacturing operations for day today support for DeltaV system.

Support on NC and CAPA and identification of root causes

Continuous improvement of the system and support for Operations as required.

Field commissioning of automation equipment’s.

System administration and maintenance support.

Computer system Validation and documentation support for automation systems.

Interacting with Operations Team, Process Team, Equipment Vendors and Technology providers.

Requirements:

Minimum of 6-10 years’ experience in a similar role, ideally in the Pharmaceutical industry.

Experience in the Designing and commissioning of automation projects for GMP manufacturing site.

Through understanding of Batch S88 standards (CM, EM, Phases, Recipes, Units etc)

Understanding of Pharmaceutical or Biopharmaceutical process

Understanding of automation hardware and networking technologies

Siemens PCS7 or S7 with Batch exposure is required.

Emerson DeltaV DCS Batch experience or Rockwell Pharma experience is advantage

Responsibilities:

· Involved in coordination and supervisor of construction works

· Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned

· Responsible for effective site management which include safety inspection and quality control of materials and plants on site

· Liaise effectively with clients, and other relevant government authorities to achieve delivery objections

· Utility cable works / Diversion works engineer onsite

Requirements:

· ITE of Construction or relevant

· site supervision work experience

· Minimum 2 years’ experience working

• Review requirements, specifications and technical design documents to provide timely and meaningful feedback
• Create detailed, comprehensive and well-structured test plans and test cases
• Estimate, prioritize, plan and coordinate testing activities
• Design, develop and execute automation scripts using open source tools
• Identify, record, document thoroughly and track bugs
• Perform thorough regression testing when bugs are resolved
• Develop and apply testing processes for new and existing products to meet client needs
• Liaise with internal teams (e.g. developers and product managers) to identify system requirements
• Monitor debugging process results
• Investigate the causes of non-conforming software and train users to implement

• Interpreting technical designs and drawings.
• Resolving M&E technical issues on site.
• Ensuring M&E works are carried out according to the design plan and project specification.
• Interpreting technical designs and drawings.
• Resolving M&E technical issues on site.
• Prepare Coordinated Services Drawing (CSD), penetration drawing and coordinate with BIM team

• Interpreting technical designs and drawings.
• Resolving M&E technical issues on site.
• Ensuring M&E works are carried out according to the design plan and project specification.
• Interpreting technical designs and drawings.
• Resolving M&E technical issues on site.
• Prepare Coordinated Services Drawing (CSD), penetration drawing and coordinate with BIM team

As a GQ (Global Quality) Package Reliability Process Engineer, you will be responsible to setup new product package reliability requirement. This includes board level reliability to emulate customer PCB design. As process engineer, you are required to ensure the process control during package reliability and establish procedures to the operation team for execution. Process improvement is also required to ensure cost and productivity gain.

Coordinating with various supplier and ensuring the AVI recipe creation compliance to Micron specs are also required. Additionally, you will respond to inquiries from internal and external customers as a subject matter expert for package reliability activities.

Responsibilities and Tasks

AVI process development

• To work with AVI supplier for development of image screening recipe with using customer parameters or industry standard.
• Modify AVI recipe and program setting to fulfil customer requirements.
• NPI Readiness to ensure the recipe is available to cater for the new product.
• Collaborate within internal Micron Engineering team to establish AVI recipe for package reliability.
• Collaborate with SMAI team to establish AT ADC program

Evaluate and Improve Processes, Materials, and/or Equipment

• Identify, investigate, and document process deviations.
• Troubleshoot process deviations using systematic troubleshooting techniques.
• Perform risk assessment at all decision points within the qualification cycle
• Develop Process Reliability Methodology and Qualification

Lead development/improvement of Process, Equipment and/or Material

• Establish engineering evaluation (DOE)
• Identify factors that impact process quality and propose solutions
• Identify and evaluate interactions between equipment, processes and resolve potential issues
• Identify and implement equipment process control methods
• Develop process limits and capabilities (CpK) and lead process improvement evaluations

Introduction of New Process and Process Changes to Operation

• Implement new standard to align with changes of industrial standard for reliability process procedure.
• Conduct training/briefing for operation team on operation procedures
• Develop process reliability tests to assess new process failure mechanisms
• Ensure that test methodology follows industry standards, such as the Joint Electron Devices Engineering Council (JEDEC)
• Define process sampling plan and instruction.
• Strong trouble shooting skill using 8D
• Analyze and report results
• Analyze failures and coordinate failure analysis
• Develop process monitor plan
• Support Excursion Material Disposition

Establish documentation and procedure

• To establish document for new process and revise existing procedure whenever applicable.
• To ensure compliance to internal and external audit
• Observe all established EHSS policies, requirements, and procedures
• Follow EHSS guidelines included in work instructions