Total 1,102 quality assurance job vacancies in Quality Assurance / Control category in Singapore

• Preparation of Inspection and Test Plan, Checklist, Procedures and review of construction drawings.
• Material receiving inspection of pipes, fittings, gaskets, valves, flanges, Steel Structure, bolts & nuts in compliance to material list, mill certificates, test reports and correct ,material specification.
• Control of quality for piping and steel stucture fabrication such as fit-up, welding, visual and dimensional inspection conforming to approved for construction drawings.
• Responsible for issuance of Non-Conformance Reports if any violation and out of standard for piping works.
• Conducts quality coordination meeting and initiate corrective and preventive action.
• Inspection of piping spools, steel structure fabrication, installation and testing.
• Preparation of all inspection reports and clearance of dossier at close up.

Requirements

Must possess bachelor degree

Must possess CSWIP 3.1/AWS

Must have Marine shipyard experience

Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Job Description

• Position: QA/QC Executive
• Singapore's leading seafood processors, exporters and distributors
• Working hours: 5 days (8am – 5.45pm, Monday to Friday)
• Salary (commensurate with experience): up to $3,500 basic salary + yearly performance bonus
• Working Location: Jurong
• Outpatient Medical & Dental Benefits Provided
• Duration: Permanent
• Industry: Processing and preserving of seafood

Main Responsibilities:

• In charge of day-to-day inspection of in-process and finished products.
• Ensure hygiene standard of process workers and processing facilities are maintained.
• Responsible for reporting any non-conformance of products/process/ hygiene violation in timely manner.
• Assist in guiding production leaders/operators in implementing corrective actions and continuous improvement in production area.
• Ensure proper records of product and hygiene inspections.
• Implementation/ maintenance of SFA, MSC/ASC, Halal, FSSC 22000, HACCP certifications and any other relevant certification.
• To liaise with authorities (eg, SFA) on related Food Safety / License issues when required.
• In charge of health certificate application and laboratory reports arrangement and maintenance of such records.

Requirements:

• Minimum Diploma in Food Science/microbiology.
• Min 2-year experience as QA/QC in Food Manufacturing industry.
• Understanding of FSSC 22000/ HACCP/GMP/ Halal requirements is advantageous.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

• Participates and conducts daily status meetings with project managers and technical support teams
• Prepares and distributes daily or weekly status reports on test progress to the project team and/or stakeholders.
• Oversee and assign tasks to team members
• Conducts Knowledge Transfer sessions and trainings for on-boarding members
• Define different scenarios for functional and integration testing
• Create and document test scripts based on functional specification requirements
• Review test cases for functional and integration testing based on the identified scenarios
• Perform data setup, run test scripts, and record test results
• Record, manage, and monitor defects in JIRA
• Provide UAT support, including system log extraction, environment readiness verification, JIRA retesting and routing, and database data extraction as needed
• Validate production issue fixes in SIT and assist with UAT verification until JIRA closure and sign-off, including support for hot fixes.
• Manually executed designed test scripts and capture test results

Job Description

· Maintain and upkeep AS 9100 and ISO 45001 requirements and procedures

· Conduct Internal Quality/ Process Audit and attend to external audit needs.

· Manage/ Perform and fulfil customer quality requirements includes document and reports submission.

· Manage First Article requirements which includes CMM programming.

· Quality Methodology – Training Material or past Stimulated Results will be used.

· Prepare and submission of Quality KPI.

· other duties assigned by the superior

Job Requirements:

· Min Diploma in Mechanical or equivalent

· Able to work independently.

· Knowledge in AS9100

· Good knowledge in Engineering Drawing Interpretation and GDT.

· Experience in CMM operations will be advantage added.

Overall Purpose of The Job

Supporting the Group Director, Marine Assurance in the continual drive and promotion of the highest standards of service delivery through the effective implementation of the HSSEQ Excellence Charter, V.MS, Assurance programs, audit standards, and associated policies, including accountability for;

• Acting as V.’s subject matter expert on Dry Bulk operations, compliance, and assurance, to ensure V.’s policies, processes, and operating standards remain up-to-date at all times, and are continually improved to meet customer, industry, and stakeholder demands

• In executing above, ensure that V.’s Assurance programs (onshore and onboard) are accurately and consistently reflecting the ‘real world’ demands and expectations of external audit and inspection programs, creating maximum internal learning and improvement opportunities, and overall service delivery performance

• Support in execution of annual Segment Engagement Plans that target customers, stakeholders, and industry bodies, ensuring consistent and proactive engagement that promotes and continually improves V.’s commercial successes within the Dry Bulk segment, globally

• Act as V.’s Group-level representative in Australia, ensuring proactive and effective engagement with AMSA and relevant local authorities, at regular intervals or when required on matters of PSC compliance or incident response

Key Responsibilities and Tasks

Promoting a strong, proactive Culture of HSSEQ Excellence, through;

• Continually providing strong, visible, and proactive examples of HSSEQ leadership

• Promotion of a transparent & value-adding Marine Assurance culture across the Group

• Promotion of outstanding operational standards of excellence, especially to customers & external stakeholders

• Acting as change agent for the continual improvement of the Group’s service delivery performances

Marine Assurance Standards

Provide subject matter expertise on the development and continual improvement of policies, processes, and marine assurance standards for the relevant industry segment, ensuring the V.MS and all associated operational practices meet industry standards and maximise service delivery and commercial success for our customers.

Marine Assurance Programs

Provide subject matter expertise on the development and continual improvement of V.Assurance programs and inspections for the relevant industry segment, ensuring such operational practices meet industry standards and maximise service delivery and commercial success for our customers.

Customer & Segment Engagement

Supporting the Group Director, Marine Assurance in the planning, execution, and reporting of annual Segment Engagement Plans that grow V.s profile and customer engagement in the relevant industry segment, and supports our Commercial activities in remaining proactive and aware of customer and segment needs, and expectations.

PSC & Industry Engagement

Acting as a Group-level leadership representative with AMSA, an other regional PSC regimes as directed, to maintain working relationships at an equivalent level, ensuring V. is continually and proactively engaged in support of safe operations and effective service delivery, and supporting V. Executive Team members in securing and delivering additional such meetings and engagements, as required.

Incident Response

Acting as a Group-level leadership representative in event of incident for the interim period that relevant ShipMan MD/OD can reach the region to engage on behalf of DoC-holding office, and ensure that V.-managed crew and assets are engaged and cared-for during this period, and that V.’s interests are protected.

Incident Investigation

Where directed, provide subject matter expertise in investigation of all incidents where there are Marine Assurance impacts and/or learning opportunities, to ensure we maximise all relevant Marine Assurance learning opportunities, resulting in effective outcomes that drive continual improvement of related systems, processes, and policies.

Desirable

• Deep understanding of and experience in safe operations of Dry Bulk vessels
• Deep understanding of and experience in associated Dry Bulk vetting & inspection programs
• Excellent ability to make, maintain, and grow customer relations with key internal and external stakeholders
• Excellent ability to represent V. and themselves to the highest professional levels in external forums and stakeholder engagement events
• Ability to travel freely to/within Australia
• In-depth knowledge of industry standards, assurance & certification programs
• Significant experience in international compliance & certification programs
• Significant experience in engaging and collaborating with multinational / multicultural teams

The Assistant Manager (Research Quality Officer) will assist the Research Director to establish and promote a safe and high-quality research culture in KK Women’s and Children’s Hospital (KKH).

Job Scope:

• Conduct audits and oversee the KKH Research Audit Framework.
• Conduct study monitoring (if any) and oversee the KKH Research Monitoring Framework.
• Responsible for review of current research policy and procedures and work instructions pertaining to hospital requirements, PDPA, HBRA, Medicines (Clinical Trials) Act and Health Product Act, etc.
• Assist in various kinds of external audit and inspection, if any.
• Oversee quality management of research projects at KKH.
• Organize and conduct regular sharing sessions or training workshop for KKH research community.

Job Requirements:

• Degree in Nursing, Life Science or related discipline.
• Minimum 8 years' site coordinator experience or minimum 6 years’ clinical research/pharmacovigilance monitoring/audit experience.
• Advanced knowledge of trial procedures and regulatory requirements in managing clinical trial.
• Proven ability to conduct quality assurance quality control, internal and external audits in clinical trial process.
• Possess good people’s management skills.
• Advanced computer skills e.g., MS Office Word and Excel.
• Good presentation, training and teaching skills.
• Good time management skills with good multi-tasking capabilities.
• Candidate with CITI, ICH-GCP, professional accreditation by ACRP or SOCRA will be an added advantage.

HOYA Technosurgical, is a subsidiary of HOYA Corporation, established in Tokyo, Japan in 2013, which has the origin of PENTAX medical business unit in 1974 arising from the merger of former PENTAX medical business unit & Japan Universal Technologies, Inc. HOYA Technosurgical has setup their first overseas plant in Singapore focusing on manufacturing, research & development and sale of Chromatography Media to pharmaceutical companies.

Main Purpose of Job:

This new position is responsible for performing production-related inspection jobs, carrying out equipment and calibration, and maintaining documentation and records.

Key Duties & Responsibilities:

· Prepare the lab for ISO 9001:2015 certification audits, including laboratory equipment qualification and method validation.

· Responsible for manufacturing management and quality control (QC) based on the quality assurance system (QAS)

· Design and develop forms, work instructions and methods for testing and evaluation.

· Utilizing knowledge in engineering fields for chemical and product quality inspection.

· Ensure lab equipment/instrument calibration and maintenance are maintained as planned.

· Trend and feedback of monitoring data to relevant sections and drive for investigation and action as necessary.

· Chemical Analysis of products using ICP, X-ray diffractometer, HPLC, FTIR, particle size analyser, UV, Endotoxin test and chloride, sulfate, carbonate limit test.

· Carry out TOC, Endotoxin test, and environmental monitoring tests.

· Carry out maintenance and calibration of equipment. Maintain accurate inspection, maintenance, and calibration of records.

· Perform investigation when the test is out-of-spec or abnormal.

· Prepare validation documents and carry out the qualification of equipment etc.

· Cross function collaboration to achieve compliance with quality requirements, improvements, development and implementation of new products /processes, supporting customer complaints, etc.

· Process explanation and audit support in customer audit

· Corrective and preventive action (CAPA) support

· Perform all other duties assigned by the supervisor or manager.

Education:

Diploma in a scientific discipline or possess equivalent experience or higher.

Experience:

· Five years’ experience in a medical device or pharmaceutical laboratory environment

· Have experience with lab equipment such as HPLC, ICP, FT-IR, UV Spectrometer and environmental monitoring sample testing.

· Familiar with ISO 9001:2015 requirements.

Proficient in Microsoft Word and Excel

Working Conditions:

Work is generally performed within an indoor laboratory environment with adequate temperature. Personal protective equipment (PPE), such as a Laboratory coat, Safety shoes, Appropriate gloves, hearing protection, Respiratory Protection etc., will be required for potential exposure to hazardous chemicals and noise hazards.

Job Description

• Industry/ Organization Type: Education
• Position Title: Quality Assurance Executive
• Working Location: Seletar
• Working Hours: 5 Days, Mon – Fri (9am – 6pm)
• Salary Package: Basic Salary (Up to $5,000) + AWS
• Duration: Permanent

Key Responsibilities

• Support the Manager in performing audits to ensure adherence to standards, including those under the Private Education Act, Private Education Regulations, EduTrust Certification Scheme, and Enhanced Registration Framework.
• Evaluate audit data to pinpoint performance discrepancies, observe trends, and assess process efficiency for ongoing enhancement.
• Work alongside departments to grasp relevant frameworks, organizational policies, and procedures, and suggest modifications.
• Discover opportunities for refining audit and/ or assessment processes.
• Other tasks as necessary.

APPLY NOW!!!

• Proficient in audit management, data analysis, quality assurance, and internal controls.
• Experience in Quality Assurance within a Private Education Institution (PEI) is an added advantage
• Familiarity with the Private Education Act, Enhanced Registration Framework, EduTrust Certification Scheme, and related standards is preferred.
• Excellent problem-solving, communication, and interpersonal abilities.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71571 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Quality Assurance (Aerospace), $4000-6000, East area

• East area
• Monday to Friday only
• Contract (Convertible to Perm)

Job description:

• Manage the receipt and control of all regulatory and technical publication documents.
• Revise and update quality procedures and work instructions.
• Support external audits conducted by customers and certification bodies.
• Conduct internal audits and supplier audits.
• Deliver in-house training sessions on quality-related topics.
• Collaborate with the Supply Chain team to evaluate and approve new suppliers.
• Perform annual evaluations of existing suppliers in coordination with the Supply Chain team and update the Approved Supplier List.

Requirements:

• Degree or Diploma in Mechanical, Manufacturing, or Aerospace Engineering, with 3 to 6 years of relevant experience, preferably in the Aviation industry.
• Familiarity with AS9100/9110/9120 standards and FAA/EASA/CAAS/CAAC Part 145 requirements is highly desirable.
• Proficiency in MS Word, Excel, PowerPoint, and Access is an advantage.

Interested applicants, kindly WhatsApp to 87511349 and email your updated resume to [email protected] and we regret that only shortlisted candidates will be notified

Yvonne Chai Cheng Man

Reg No: R23115356

EA License: 23C2060

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

As a Senior Industry 4.0 (I4.0) Analyst at Micron Technology, Inc., you will report to the Smart Manufacturing and Artificial Intelligence organization. The team defines, drives and delivers end to end smart manufacturing solution, integrated across functions of the business. The team will investigate applying industry-leading the best methodologies in automation, AI and machine learning to enhance Micron’s product development, business, and administrative processes across the company.

Responsibilities and Tasks

• Lead the analysist for complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences.
• Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge.
• Creates specifications for reports and analysis based on business needs and required or available data elements.
• May provide consultation to users and lead cross-functional teams to address business issues.
• May directly produce datasets and reports for analysis using system reporting tools
• Understands business problem and translates user requirements into technical language and vice versa for data science / technical solution / IT teams.
• I4.0 Analyst with strong domain knowledge is preferred and will bridge the gap between users and developer team
• Accountable to ensure modules / functionalities address current metrics gaps and new business opportunity
• Translating project expected project metrics gain into dollar values, partnering with Finance
• Defining priority for projects for strategic pillar roadmap provided by Strategy Pillar Leader
• Conduct diagnostic and understand gaps and areas of improvement in current IIoT solutions and ways of working
• Work with PDE, Data Scientist, System Architect and IIoT end users to design & define requirements and analyze information, production interdiction that related to the adoption of IIoT for Smart Manufacturing
• Ensure optimization and standardization of tools and processes leveraging central team business partners to allow I4.0 solutions to be scaled sustainably across Micron Backend sites
• Develop business case, including impact validation approach, ROI of potential solutions and prioritize & propose projects for implementation
• Lead projects and activities that will require the coordination, support, and management of resources from global teams
• Provide expert functional and process guidance on system interfaces and capabilities

Qualifications

• Master/Bachelor's Degree in Electrical Engineering, Specialized in Data Analytic.
• At least 5-7 years of work experience in Assembly & Test and Post Wafer Fab (PwF) Process & Equipment Engineering or similar operations functions, good knowledge in High Bandwidth Memory (HBM) production is preferred
• Familiar with Composite Metro solution development, systems and solutions for high volume and high mix production environment
• Good interpersonal skills with demonstrable ability to effectively lead and present to small and large groups
• Proven ability to work multi-functionally with peers, senior and mid-level management
• Peer leadership and relationship management skills
• Strong analytical and problem-solving skills
• Highly organized and ability to remain flexible to the changing business needs

About Micron
As the leader in innovative memory solutions, Micron is helping the world make sense of data by delivering technology that is transforming how the world uses information. Through our global brands — Micron, Crucial and Ballistix — we offer the industry’s broadest portfolio. We are the only company manufacturing today’s major memory and storage technologies: DRAM, NAND, NOR and High Bandwidth Memory. Our solutions are purpose built to demonstrate the value of data to unlock financial insights, accelerate scientific breakthroughs and enhance communication around the world.We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status

Analyzes complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences. Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge. Creates specifications for reports and analysis based on business needs and required or available data elements. May provide consultation to users and lead cross-functional teams to address business issues. May directly produce datasets and reports for analysis using system reporting tools.

• MNC Company
• Basic $2500 - $3200 + Allowance + AWS + VB + Excellent Benefits
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8.30am to 5.15pm
• Jurong Island. Company Transport provided
• Training provided for those without/lesser experience

Job Responsibilities:

• To perform routine analysis of polymer testing & wet chemistry analysis
• To ensure that tests assigned are performed in a timely manner in accordance with validated test protocols and procedures
• To perform instruments’ calibrations, maintenance, and troubleshooting
• To perform housekeeping and maintain the cleanliness in the laboratory
• To perform inventory check & improvement idea in the lab
• To assist superiors with non – routine study samples and any other tasks assigned

Requirements:

• Diploma in Chemical Process Technology / Chemical Engineering
• Willing to work overtime when required

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Overview

The Job Holder will support in building improvement capabilities and culture in the NUHS Regional Health System Office (RHSO), including community partners such as GPs. The Job Holder will be involved in co-developing and conducting quality improvement training for RHSO staff and community partners, as well as facilitate and coach small to large scale improvement projects through the use of appropriate tools/methodologies.

Job Responsibilities

1. Deliver QI Training

• Develop training materials and resources (e.g. training guides and e-learning videos) on quality improvement
• Conduct and facilitate quality improvement training sessions/workshops for RHSO staff and partners
• Gather feedback on training sessions and use of appropriate improvement methodologies/tools
• Deliver training on lean management and human-centred tools to impart knowledge and skills to hospital staff.

1. Facilitation of improvement projects

• Facilitate and coach department/division and organisation-wide level improvement projects to improving quality and processes through the use of appropriate tools/methodologies
• Monitor the progress of improvement activities and guide teams to take appropriate actions
• Assist in interpreting data to measure the effectiveness of the improvement activities

1. Strategy & Culture Building

• Assist in development and implementation of Improvement framework and strategies
• Support initiatives or events that promote improvement and Innovation culture in RHSO
• Lead engagement with HODs to influence and identify areas of improvement in quality and safety

1. Any other tasks as assigned

Requirements

Qualification Required and Area of Discipline

Good degree in any discipline, preferably in Life Sciences, Business Administration, Industrial Design

Prior healthcare sector experience is preferred

Required Competencies and Capabilities (Skills, Experiences and Professional Licences)

• Proficient in quality improvement methodologies such as Lean, process/value-stream mapping, design thinking
• At least 1-2 years of experience in facilitating workshops and conducting trainings
• Confident in coaching and guiding fellow colleagues in Quality Improvement tools
• Certified Six Sigma Green/Black Belt will be an added advantage
• Able to engage stakeholders and work through doctors, nurses, allied health professionals, operations and administrative staff
• Able to work independently and as a team
• Ability to perform even under tight timelines
• Good analytical and organization skills
• Good writing and verbal communication skills
• Open to learning and trying new things. Able to grasp concepts easily and be able to think on the feet.
• Highly self-driven and self-motivated, positive attitude and perseverance to overcome obstacles

The Quality Control Clerk plays a vital role in ensuring the quality of products and processes by performing various administrative and inspection tasks. This position requires attention to detail, organizational skills, and ability to work in a fast-paced environment.

Administrative Tasks

1. Maintain accurate and up-to-date quality records, files, and databases.

2. Assist in document control, including revising and distributing quality procedures and policies.

Inspection and Testing

1. Conduct visual inspections of products, materials, and packaging.

2. Verify simple product conformity to specifications, drawings, and standards.

3. Perform sampling inspections and testing as required.

4. Document inspection results, nonconformities, and corrective actions.

Quality Control Processes

1. Identify and report quality issues, defects, or nonconformities.

Communication and Collaboration

1. Liaise with production, procurement, and engineering teams to resolve quality issues.

2. Communicate quality requirements and standards to suppliers and vendors.

3. Collaborate with internal stakeholders to improve quality processes.

REQUIREMENTS

Education level:

1. Min. Higher Nitec/Diploma level ME/Mechatronic or it relevant.

Experience level:

1. 1-2 years of experience in quality control, inspection, or related field.

2. Experience in manufacturing, aerospace, automotive, or medical device industries preferred.

Skills:

1. Strong attention to detail and organizational skills.

2. Excellent communication, interpersonal, and problem-solving skills.

3. Familiarity with quality management systems (e.g., ISO 9001, AS9100).

4. Proficient in MS Office.

Certifications:
1. Certified Quality Inspector (CQI) or Certified Quality Technician (CQT) certification desirable.

Physical Requirements:

1. Ability to work in a manufacturing environment.

2. Lift up to 12kg occasionally.

3. Stand, walk, or sit for extended periods.

What This Job Offers:

• Basic Salary: Up to $3,000 + Fixed Allowances: $950
• Additional Benefits: Permanent role with AWS, Variable Bonus, and Flexi Benefits
• Location: Jurong Island
• Work Schedule: 12-hour rotational shifts

Requirements:

• Degree holders in Chemistry (Fresh grads are welcome!).
• Internship or hands-on experience in chemical lab testing is a bonus.
• Willing to work 12-hour shifts and thrive in a dynamic lab environment.

Key Responsibilities:

• Conduct quality control (QC) analysis on raw materials, in-process, and finished products.
• Coordinate QC activities to support other departments and business needs.
• Troubleshoot and make critical decisions to ensure accurate QC results.
• Proactively improve QC systems and processes.
• Lead short-term projects and investigations for customer complaints.
• Calibrate lab equipment and maintain records.
• Supervise plant operators and train new QC team members.
• Take full ownership of the QC lab during shifts.

Why Join Us?

• Be part of a critical team ensuring product excellence for a global organization.
• Gain hands-on experience in a fast-paced chemical manufacturing environment.
• Take charge of projects and develop valuable leadership skills.

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1983718

Triton AI Pte Ltd

License no. 21C0661

Note: This role requires frequent travel and will be based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Key Responsibilities:

• Implement advanced monitoring systems to ensure product quality and optimize yield in electronics manufacturing.
• Proactively identify areas for improvement and develop strategies to enhance overall product quality.
• Lead initiatives to address and resolve abnormal quality issues within the manufacturing process.
• Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Drive efforts to improve internal quality control procedures and enhance process capability.
• Implement best practices to streamline processes and maximize operational efficiency.
• Lead initiatives to resolve customer-reported quality issues, ensuring timely and effective resolutions.
• Prepare detailed reports for stakeholders outlining corrective actions and preventive measures.
• Develop and implement strategies to optimize quality inspection processes.
• Identify opportunities for automation and technological advancements to enhance inspection efficiency.
• Foster open communication and collaboration across departments for effective quality management.
• Coordinate with various teams to ensure a unified approach toward achieving quality objectives.
• Manage personnel-related tasks, including task assignments, coordination, attendance, and performance management.
• Develop and implement training programs to enhance team skills and knowledge.
• Oversee the timely delivery of tasks and projects to meet quality objectives within established timelines.

Requirements:

• Bachelor’s degree in a relevant field; advanced degree preferred.
• A minimum of 6-8 years of proven experience in quality management, particularly within manufacturing processes.
• Strong analytical and problem-solving skills.
• Excellent leadership and interpersonal skills.
• Familiarity with quality management systems and standards such as TS16949 and VDA 6.3.
• Experience collaborating with counterparts in China/Taiwan.
• Certification in quality management (e.g., Six Sigma) is advantageous.
• Willingness to travel frequently and be based in China and Vietnam for at least 10 months per year (separate living accommodations provided). The role includes annual 4 round-trip tickets back to Singapore.

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Responsible for inspection of parts and products and ensuring that they comply with the set standards and specifications
• Ensure that all inspection check sheets are duly completed
• Ensure that non-conformance parts and products are not released to the customers
• Ensure that defects are corrected before releasing them to Production
• Ensure that corrective or preventive action are in place and sustained
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job Requirements:

• Minimum NTC2/3, ITC in Mechanical/Mechatronics/Precision Engineering
• At least 1 year of experience in quality control and related work
• At least 1 year of experience in the operation of CNC machines
• Basic knowledge of Microsoft Office tools: Excel, Word, PowerPoint

We are seeking a highly skilled and experienced Systems Assurance Manager to join our team. The successful candidate will be responsible for ensuring that all systems and processes meet the required standards and regulations. This role involves managing a team of professionals, developing and implementing assurance strategies, and working closely with other departments to ensure overall system integrity and performance.

Key Responsibilities:

• Develop and implement systems assurance strategies and plans.
• Lead and manage a team of assurance professionals.
• Ensure compliance with industry standards and regulations.
• Conduct regular audits and assessments of systems and processes.
• Identify and address potential risks and issues.
• Collaborate with other departments to ensure system integrity and performance.
• Provide training and support to team members and other stakeholders.
• Prepare and present reports to senior management

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel and based in China and Vietnam at least 10 months per year. (separate living arrangements provided, includes four round-trip tickets to Singapore annually)

Job Requirements:

• Degree in Information Technology or equivalent.
• Must have minimum 4-6 years of experience in Software Quality Testing with hands-on experience in Automation Testing.
• Experience with open-source automated testing frameworks such as Cucumber, TestNg and Playwright.
• Experience with open-source performance testing tools such as JMeter, Gatling, Locust or enterprise level tools such as HP LoadRunner
• Experience with open-source penetration testing tools such as ZAP, Burp Suite, SQL Map or enterprise level tools such as HP WebInspect, Nessus, CheckMarx.
• Must have strong understanding of testing techniques, risk analysis, test-driven development, continuous integration and continuous delivery.
• Must have proficiency in programming languages such as Java or Kotlin with good to have knowledge in Springboot.
• Experience working in SCRUM teams.
• Excellent written and verbal communications skills

• Well Established Company
• Basic $3000 - $3500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors to ensure daily inspection activities comply with established standards.
• Provide training, coaching, and mentoring to enhance team members' skills and performance.
• Develop and maintain work schedules for the department to optimize resource allocation and efficiency.
• Collaborate with cross-functional teams to drive continuous improvement, track non-conformities, and assess CAPA effectiveness.
• Review and approve Device History Records (DHR). Ensure quality records and samples are retained in accordance with Good Documentation Practices (GDP).
• Implement changes to quality documentation, such as QC procedures, process workflows, and work instructions, and guide the team through these changes.
• Review and submit validation or verification measurement reports.
• Perform daily process audits to ensure compliance with quality operational requirements.
• Ensure proper product identification and traceability.
• As the calibration administrator, ensure all equipment is properly calibrated and provides accurate measurements with appropriate identification.
• Assist with customer complaint analysis, investigate quality issues, and implement corrective actions.
• Authorize product release (Certificate of Conformance), and review and approve Certificates of Analysis (COA).
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment.
• Monitor and report on key performance indicators (KPIs) for QC team performance, production quality trends, and quality control charts.
• Perform any other tasks as assigned by management.

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG JYA YEE (R23119014)

EA Recruitment Pte Ltd

EA License No: 21C0492